-
Reactive additive capillary stam** with double network hydrogel-derived aerogel stamps under solvothermal conditions
Authors:
Fatih Alarslan,
Martin Frosinn,
Kevin Ruwisch,
Jannis Thien,
Tim Jähnichen,
Louisa Eckert,
Jonas Klein,
Markus Haase,
Dirk Enke,
Joachim Wollschläger,
Uwe Beginn,
Martin Steinhart
Abstract:
Integration of solvothermal reaction products into complex thin-layer architectures is frequently achieved by combinations of layer transfer and subtractive lithography, whereas direct additive substrate patterning with solvothermal reaction products has remained challenging. We report reactive additive capillary stam** under solvothermal conditions as a parallel contact-lithographic access to p…
▽ More
Integration of solvothermal reaction products into complex thin-layer architectures is frequently achieved by combinations of layer transfer and subtractive lithography, whereas direct additive substrate patterning with solvothermal reaction products has remained challenging. We report reactive additive capillary stam** under solvothermal conditions as a parallel contact-lithographic access to patterns of solvothermal reaction products in thin-layer configurations. To this end, corresponding precursor inks are infiltrated into mechanically robust mesoporous aerogel stamps derived from double-network hydrogels (DNHGs). The stamp is then brought into contact with a substrate to be patterned under solvothermal reaction conditions inside an autoclave. The precursor ink forms liquid bridges between the topographic surface pattern of the stamp and the substrate. Evaporation-driven enrichment of the precursors in these liquid bridges along with their liquid-bridge-guided conversion into the solvothermal reaction products yields large-area submicron patterns of the solvothermal reaction products replicating the stamp topography. As example, we prepared thin hybrid films, which contained ordered monolayers of superparamagnetic submicron nickel ferrite dots prepared by solvothermal capillary stam** surrounded by nickel electrodeposited in a second, orthogonal substrate functionalization step. The submicron nickel ferrite dots acted as magnetic hardener halving the remanence of the ferromagnetic nickel layer. In this way, thin-layer electromechanical systems, transformers and positioning systems may be customized.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Phenolic Resin Dual-Use Stamps for Capillary Stam** and Decal Transfer Printing
Authors:
Leiming Guo,
Jonas Klein,
Jannis Thien,
Michael Philippi,
Markus Haase,
Joachim Wollschläger,
Martin Steinhart
Abstract:
We report an optimized two-step thermopolymerization process carried out in contact with micropatterned molds that yields porous phenolic resin dual-use stamps with topographically micropatterned contact surfaces. With these stamps, two different parallel additive substrate manufacturing methods can be executed: capillary stam** and decal transfer microlithography. Under moderate contact pressur…
▽ More
We report an optimized two-step thermopolymerization process carried out in contact with micropatterned molds that yields porous phenolic resin dual-use stamps with topographically micropatterned contact surfaces. With these stamps, two different parallel additive substrate manufacturing methods can be executed: capillary stam** and decal transfer microlithography. Under moderate contact pressures, the porous phenolic resin stamps are used for non-destructive ink transfer to substrates by capillary stam**. Continuous ink supply through the pore systems to the contact surfaces of the porous phenolic resin stamps enables multiple successive stamp-substrate contacts for lithographic ink deposition under ambient conditions. No deterioration of the quality of the deposited pattern occurs and no interruptions for ink replenishment are required. Under high contact pressure, porous phenolic resin stamps are used for decal transfer printing. In this way, the tips of the stamps' contact elements are lithographically transferred to counterpart substrates. The granular nature of the phenolic resin facilitates the rupture of the contact elements upon stamp retraction. The deposited phenolic resin micropatterns characterized by abundance of exposed hydroxyl groups are used as generic anchoring sites for further application-specific functionalizations. As example, we deposited phenolic resin micropatterns on quartz crystal microbalance resonators and further functionalized them with polyethylenimine for preconcentration sensing of humidity and gaseous formic acid. We envision that also preconcentration coatings for other sensing methods, such as attenuated total reflection infrared spectroscopy and surface plasmon resonance spectroscopy, are accessible by this functionalization algorithm
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
Quadratic magnetooptic Kerr effect spectroscopy of Fe epitaxial films on MgO(001) substrates
Authors:
Robin Silber,
Ondřej Stejskal,
Lukáš Beran,
Petr Cejpek,
Roman Antoš,
Tristan Matalla-Wagner,
Jannis Thien,
Olga Kuschel,
Joachim Wollschläger,
Martin Veis,
Timo Kuschel,
Jaroslav Hamrle
Abstract:
The magnetooptic Kerr effect (MOKE) is a well known and handy tool to characterize ferro-, ferri- and antiferromagnetic materials. Many of the MOKE techniques employ effects solely linear in magnetization $\bm{M}$. Nevertheless, a higher-order term being proportional to $\bm{M}^2$ and called quadratic MOKE (QMOKE) can additionally contribute to the experimental data. Here, we present detailed QMOK…
▽ More
The magnetooptic Kerr effect (MOKE) is a well known and handy tool to characterize ferro-, ferri- and antiferromagnetic materials. Many of the MOKE techniques employ effects solely linear in magnetization $\bm{M}$. Nevertheless, a higher-order term being proportional to $\bm{M}^2$ and called quadratic MOKE (QMOKE) can additionally contribute to the experimental data. Here, we present detailed QMOKE spectroscopy measurements in the range of 0.8 -- 5.5\,eV based on a modified 8-directional method applied on ferromagnetic bcc Fe thin films grown on MgO substrates. From the measured QMOKE spectra, two further complex spectra of the QMOKE parameters $G_s$ and $2G_{44}$ are yielded. The difference between those two parameters, known as $ΔG$, denotes the strength of the QMOKE anisotropy. Those QMOKE parameters give rise to the QMOKE tensor $\bm{G}$, fully describing the perturbation of the permittivity tensor in the second order in $\bm{M}$ for cubic crystal structures. We further present experimental measurements of ellipsometry and linear MOKE spectra, wherefrom permittivity in the zeroth and the first order in $\bm{M}$ are obtained, respectively. Finally, all those spectra are described by ab-initio calculations.
△ Less
Submitted 5 July, 2019; v1 submitted 30 April, 2019;
originally announced April 2019.
-
Steel-Based Electrocatalysts for Efficient and Durable Oxygen Evolution in Acidic Media
Authors:
Helmut Schäfer,
Karsten Küpper,
Mercedes Schmidt,
Klaus Müller-Buschbaum,
Johannes Stangl,
Diemo Daum,
Martin Steinhart,
Christine Schulz-Kölbel,
Weijia Han,
Joachim Wollschläger,
Ulrich Krupp,
Peilong Hou,
Xiaogang Liu
Abstract:
High overpotentials, particularly an issue of common anode materials, hamper the process of water electrolysis for clean energy generation. Thanks to immense research efforts up to date oxygen evolution electrocatalysts based on earth-abundant elements work efficiently and stably in neutral and alkaline regimes. However, non-noble metal-based anode materials that can withstand low pH regimes are c…
▽ More
High overpotentials, particularly an issue of common anode materials, hamper the process of water electrolysis for clean energy generation. Thanks to immense research efforts up to date oxygen evolution electrocatalysts based on earth-abundant elements work efficiently and stably in neutral and alkaline regimes. However, non-noble metal-based anode materials that can withstand low pH regimes are considered to be an indispensable prerequisite for the water splitting to succeed in the future. All oxygen evolving electrodes working durably and actively in acids contain Ir at least as an additive. Due to its scarcity and high acquisition costs noble elements like Pt, Ru and Ir need to be replaced by earth abundant elements. We have evaluated a Ni containing stainless steel for use as an oxygen-forming electrode in diluted H2SO4. Unmodified Ni42 steel showed a significant weight loss after long term OER polarization experiments. Moreover, a substantial loss of the OER performance of the untreated steel specimen seen in linear sweep voltammetry measurements turned out to be a serious issue. However, upon anodization in LiOH, Ni42 alloy was rendered in OER electrocatalysts that exhibit under optimized synthesis conditions stable overpotentials down to 445 mV for 10 mA cm-2 current density at pH 0. Even more important: The resulting material has proven to be robust upon long-term usage (weight loss: 20 mug/mm2 after 50 ks of chronopotentiometry at pH 1) towards OER in H2SO4. Our results suggest that electrochemical oxidation of Ni42 steel in LiOH (sample Ni42Li205) results in the formation of a metal oxide containing outer zone that supports solution route-based oxygen evolution in acidic regime accompanied by a good stability of the catalyst.
△ Less
Submitted 14 March, 2018;
originally announced March 2018.
-
Quadratic magnetooptic spectroscopy setup based on photoelastic light modulation
Authors:
Robin Silber,
Michaela Tomíčková,
Jari Rodewald,
Joachim Wollschläger,
Martin Veis,
Timo Kuschel,
Jaroslav Hamrle
Abstract:
In most of the cases the magnetooptic Kerr effect (MOKE) techniques rely solely on the effects linear in magnetization ($\bm{M}$). Nevertheless, a higher-order term being proportional to $\bm{M}$$^2$ and called quadratic MOKE (QMOKE) can additionally contribute to experimental data. Handling and understanding the underlying origin of QMOKE could be the key to utilize this effect for investigation…
▽ More
In most of the cases the magnetooptic Kerr effect (MOKE) techniques rely solely on the effects linear in magnetization ($\bm{M}$). Nevertheless, a higher-order term being proportional to $\bm{M}$$^2$ and called quadratic MOKE (QMOKE) can additionally contribute to experimental data. Handling and understanding the underlying origin of QMOKE could be the key to utilize this effect for investigation of antiferromagnetic materials in the future due to their vanishing first order MOKE contribution. Also, better understanding of QMOKE and hence better understanding of magnetooptic (MO) effects in general is very valuable, as the MO effect is very much employed in research of ferro- and ferrimagnetic materials. Therefore, we present our QMOKE and longitudinal MOKE spectroscopy setup with a spectral range of 0.8--5.5\,eV. The setup is based on light modulation through a photoelastic modulator and detection of second-harmonic intensity by a lock-in amplifier. To measure the Kerr ellipticity an achromatic compensator is used within the setup, whereas without it Kerr rotation is measured. The separation of QMOKE spectra directly from the measured data is based on measurements with multiple magnetization directions. So far the QMOKE separation algorithm is developed and tested for but not limited to cubic (001) oriented samples. The QMOKE spectra yielded by our setup arise from two quadratic MO parameters $G_s$ and $2G_{44}$, being elements of quadratic MO tensor $\bm{G}$, which describe perturbation of the permittivity tensor in the second order in $\bm{M}$.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
Electrooxidation of a cobalt based steel in LiOH: a non-noble metal based electro-catalyst suitable for durable water-splitting in an acidic milieu
Authors:
Helmut Schäfer,
Karsten Küpper,
Klaus Müller-Buschbaum,
Diemo Daum,
Martin Steinhart,
Joachim Wollschläger,
Ulrich Krupp,
Mercedes Schmidt,
Weijia Hana,
Johannes Stangl
Abstract:
The use of proton exchange membrane (PEM) electrolyzers is the method of choice for the conversion of solar energy when frequently occurring changes of the current load are an issue. However, this technique requires electrolytes with low pH. All oxygen evolving electrodes working durably and actively in acids contain IrOx. Due to their scarcity and high acquisition costs, noble elements like Pt, R…
▽ More
The use of proton exchange membrane (PEM) electrolyzers is the method of choice for the conversion of solar energy when frequently occurring changes of the current load are an issue. However, this technique requires electrolytes with low pH. All oxygen evolving electrodes working durably and actively in acids contain IrOx. Due to their scarcity and high acquisition costs, noble elements like Pt, Ru and Ir need to be replaced by earth abundant elements. We have evaluated a cobalt containing steel for use as an oxygen-forming electrode in H2SO4. We found that the dissolving of ingredients out of the steel electrode at oxidative potential in sulfuric acid, which is a well-known, serious issue, can be substantially reduced when the steel is electro-oxidized in LiOH prior to electrocatalysis. Under optimized synthesis conditions a cobalt-containing tool steel was rendered into a durable oxygen evolution reaction (OER) electrocatalyst (weight loss: 39 mug mm-2 after 50 000 s of chronopotentiometry at pH 1) that exhibits overpotentials down to 574 mV at 10 mA cm-2 current density at pH 1. Focused ion beam SEM FIB-SEM) was successfully used to create a structure-stability relationship.
△ Less
Submitted 28 November, 2017;
originally announced December 2017.
-
X20CoCrWMo10-9//Co3O4: a Metal-Ceramic Composite with Unique Efficiency Values for Water-Splitting in Neutral Regime
Authors:
Helmut Schäfer,
Daniel M. Chevrier,
Karsten Küpper,
Peng Zhang,
Joachim Wollschläger,
Diemo Daum,
Martin Steinhart,
Claudia Heß,
Ulrich Krupp,
Mercedes Schmidt
Abstract:
Water splitting allows the storage of solar energy into chemical bonds (H2+O2) and will help to implement the urgently needed replacement of limited available fossil fuels. Particularly in neutral environment electrochemically initiated water splitting suffers from low efficiency due to high overpotentials caused by the anode. Electro-activation of X20CoCrWMo10-9, a Co-based tool steel resulted in…
▽ More
Water splitting allows the storage of solar energy into chemical bonds (H2+O2) and will help to implement the urgently needed replacement of limited available fossil fuels. Particularly in neutral environment electrochemically initiated water splitting suffers from low efficiency due to high overpotentials caused by the anode. Electro-activation of X20CoCrWMo10-9, a Co-based tool steel resulted in a new composite material (X20CoCrWMo10-9//Co3O4) that catalyzes the anode half-cell reaction of water electrolysis with a so far unequalled effectiveness. The current density achieved with this new anode in pH 7 corrected 0.1 M phosphate buffer is over a wide range of overpotentials around 10 times higher compared to recently developed, up-to-date electrocatalysts and represents the benchmark performance advanced catalysts show in regimes that support water splitting significantly better than pH 7 medium. X20CoCrWMo10-9//Co3O4 exhibited electrocatalytic properties not only at pH 7, but also at pH 13, which is much superior to the ones of IrO2-RuO2, single-phase Co3O4- or Fe/Ni- based catalysts. Both XPS and FT-IR experiments unmasked Co3O4 as the dominating compound on the surface of the X20CoCrWMo10-9//Co3O4 composite. Upon a comprehensive dual beam FIB-SEM (focused ion beam-scanning electron microscopy) study we could show that the new composite does not exhibit a classical substrate-layer structure due to the intrinsic formation of the Co-enriched outer zone. This structural particularity is basically responsible for the outstanding electrocatalytic OER performance.
△ Less
Submitted 22 March, 2017;
originally announced March 2017.
-
Electro-Oxidation of Ni42 Steel: A highly Active Bifunctional Electrocatalyst
Authors:
Helmut Schäfer,
Daniel M. Chevrier,
Peng Zhang,
Johannes Stangl,
Klaus Müller-Buschbaum,
Jörg D. Hardege,
Karsten Küpper,
Joachim Wollschläger,
Ulrich Krupp,
Simon Dühnen,
Martin Steinhart,
Lorenz Walder,
Shamaila Sadaf,
Mercedes Schmidt
Abstract:
Janus type Water-Splitting Catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni 42 steel was upon harsh anodization converted in a bifunctional electrocatalyst. Oxygen evolution reaction- (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) respectively at pH 0, 1, 13, 14, 14.6 (HER).…
▽ More
Janus type Water-Splitting Catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni 42 steel was upon harsh anodization converted in a bifunctional electrocatalyst. Oxygen evolution reaction- (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) respectively at pH 0, 1, 13, 14, 14.6 (HER). The current density taken from long-term OER measurements in pH 7 buffer solution upon the electro activated steel at 491 mV overpotential was around 4 times higher (4 mA/cm2) in comparison with recently developed OER electrocatalysts. The very strong voltage-current behavior of the catalyst shown in OER polarization experiments at both pH 7 and at pH 13 were even superior to those known for IrO2-RuO2. No degradation of the catalyst was detected even when conditions close to standard industrial operations were applied to the catalyst. A stable Ni-, Fe- oxide based passivating layer sufficiently protected the bare metal for further oxidation. Quantitative charge to oxygen- (OER) and charge to hydrogen (HER) conversion was confirmed. High resolution XPS spectra showed that most likely gamma-NiO(OH) and FeO(OH) are the catalytic active OER and NiO is the catalytic active HER species.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.