-
Arbitrary electro-optic bandwidth and frequency control in lithium niobate optical resonators
Authors:
Jason F. Herrmann,
Devin J. Dean,
Christopher J. Sarabalis,
Vahid Ansari,
Kevin Multani,
E. Alex Wollack,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over reso…
▽ More
In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over resonator frequency and bandwidth on two different devices. We observe up to $\sim50\times$ tuning in the bandwidth over $\sim50$ V with linear frequency control of $\sim230$ MHz/V. We also develop a closed-form model predicting the tuning behavior of the device. This paves the way for rapid phase and amplitude control over light transmitted through our device.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Optically heralded microwave photons
Authors:
Wentao Jiang,
Felix M. Mayor,
Sultan Malik,
Raphaël Van Laer,
Timothy P. McKenna,
Rishi N. Patel,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
A quantum network that distributes and processes entanglement would enable powerful new computers and sensors. Optical photons with a frequency of a few hundred terahertz are perhaps the only way to distribute quantum information over long distances. Superconducting qubits on the other hand, which are one of the most promising approaches for realizing large-scale quantum machines, operate naturall…
▽ More
A quantum network that distributes and processes entanglement would enable powerful new computers and sensors. Optical photons with a frequency of a few hundred terahertz are perhaps the only way to distribute quantum information over long distances. Superconducting qubits on the other hand, which are one of the most promising approaches for realizing large-scale quantum machines, operate naturally on microwave photons that have roughly $40,000$ times less energy. To network these quantum machines across appreciable distances, we must bridge this frequency gap and learn how to generate entanglement across widely disparate parts of the electromagnetic spectrum. Here we implement and demonstrate a transducer device that can generate entanglement between optical and microwave photons, and use it to show that by detecting an optical photon we add a single photon to the microwave field. We achieve this by using a gigahertz nanomechanical resonance as an intermediary, and efficiently coupling it to optical and microwave channels through strong optomechanical and piezoelectric interactions. We show continuous operation of the transducer with $5\%$ frequency conversion efficiency, and pulsed microwave photon generation at a heralding rate of $15$ hertz. Optical absorption in the device generates thermal noise of less than two microwave photons. Joint measurements on optical photons from a pair of transducers would realize entanglement generation between distant microwave-frequency quantum nodes. Improvements of the system efficiency and device performance, necessary to realize a high rate of entanglement generation in such networks are within reach.
△ Less
Submitted 19 October, 2022;
originally announced October 2022.
-
Mirror symmetric on-chip frequency circulation of light
Authors:
Jason F. Herrmann,
Vahid Ansari,
Jiahui Wang,
Jeremy D. Witmer,
Shanhui Fan,
Amir H. Safavi-Naeini
Abstract:
Integrated circulators and isolators are important for develo** on-chip optical technologies, such as laser cavities, communication systems, and quantum information processors. These devices appear to inherently require mirror symmetry breaking to separate backwards from forwards propagation, so existing implementations rely upon magnetic materials, or interactions driven by propagating waves. I…
▽ More
Integrated circulators and isolators are important for develo** on-chip optical technologies, such as laser cavities, communication systems, and quantum information processors. These devices appear to inherently require mirror symmetry breaking to separate backwards from forwards propagation, so existing implementations rely upon magnetic materials, or interactions driven by propagating waves. In contrast to previous work, we demonstrate a mirror symmetric nonreciprocal device. Our device comprises three coupled photonic resonators implemented in thin-film lithium niobate. Applying radio frequency modulation, we drive conversion between the frequency eigenmodes of this system. We measure nearly 40 dB of isolation for approximately 75 mW of RF power near 1550 nm. We simultaneously generate nonreciprocal conversion between all of the eigenmodes in order to demonstrate circulation. Mirror symmetric circulation significantly simplifies the fabrication and operation of nonreciprocal integrated devices. Finally, we consider applications of such on-chip isolators and circulators, such as full-duplex isolation within a single waveguide.
△ Less
Submitted 28 September, 2021;
originally announced September 2021.
-
Photonic modal circulator using temporal refractive-index modulation with spatial inversion symmetry
Authors:
Jiahui Wang,
Jason F. Herrmann,
Jeremy D. Witmer,
Amir H. Safavi-Naeini,
Shanhui Fan
Abstract:
It has been demonstrated that dynamic refractive index modulation, which breaks time-reversal symmetry, can be used to create on-chip non-reciprocal photonic devices. In order to achieve amplitude non-reciprocity, all such devices moreover require modulations that break spatial symmetries, which adds complexity in implementations. Here we introduce a modal circulator, which achieves amplitude non-…
▽ More
It has been demonstrated that dynamic refractive index modulation, which breaks time-reversal symmetry, can be used to create on-chip non-reciprocal photonic devices. In order to achieve amplitude non-reciprocity, all such devices moreover require modulations that break spatial symmetries, which adds complexity in implementations. Here we introduce a modal circulator, which achieves amplitude non-reciprocity through a circulation motion among three modes. We show that such a circulator can be achieved in a dynamically-modulated structure that preserves mirror symmetry, and as a result can be implemented using only a single standing-wave modulator, which significantly simplifies the implementation of dynamically-modulated non-reciprocal device. We also prove that in terms of the number of modes involved in the transport process, the modal circulator represents the minimum configuration in which complete amplitude non-reciprocity can be achieved while preserving spatial symmetry.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
Room-temperature Mechanical Resonator with a Single Added or Subtracted Phonon
Authors:
Rishi N. Patel,
Timothy P. McKenna,
Zhaoyou Wang,
Jeremy D. Witmer,
Wentao Jiang,
Raphaël Van Laer,
Christopher J. Sarabalis,
Amir H. Safavi-Naeini
Abstract:
A room-temperature mechanical oscillator undergoes thermal Brownian motion with an amplitude much larger than the amplitude associated with a single phonon of excitation. This motion can be read out and manipulated using laser light using a cavity-optomechanical approach. By performing a strong quantum measurement, i.e., counting single photons in the sidebands imparted on a laser, we herald the a…
▽ More
A room-temperature mechanical oscillator undergoes thermal Brownian motion with an amplitude much larger than the amplitude associated with a single phonon of excitation. This motion can be read out and manipulated using laser light using a cavity-optomechanical approach. By performing a strong quantum measurement, i.e., counting single photons in the sidebands imparted on a laser, we herald the addition and subtraction of single phonons on the 300K thermal motional state of a 4GHz mechanical oscillator. To understand the resulting mechanical state, we implement a tomography scheme and observe highly non-Gaussian phase-space distributions. Using a maximum likelihood method, we infer the density matrix of the oscillator and confirm the counter-intuitive doubling of the mean phonon number resulting from phonon addition and subtraction.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Gigahertz phononic integrated circuits on thin-film lithium niobate on sapphire
Authors:
Felix M. Mayor,
Wentao Jiang,
Christopher J. Sarabalis,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
Acoustic devices play an important role in classical information processing. The slower speed and lower losses of mechanical waves enable compact and efficient elements for delaying, filtering, and storing of electric signals at radio and microwave frequencies. Discovering ways of better controlling the propagation of phonons on a chip is an important step towards enabling larger scale phononic ci…
▽ More
Acoustic devices play an important role in classical information processing. The slower speed and lower losses of mechanical waves enable compact and efficient elements for delaying, filtering, and storing of electric signals at radio and microwave frequencies. Discovering ways of better controlling the propagation of phonons on a chip is an important step towards enabling larger scale phononic circuits and systems. We present a platform, inspired by decades of advances in integrated photonics, that utilizes the strong piezoelectric effect in a thin film of lithium niobate on sapphire to excite guided acoustic waves immune from leakage into the bulk due to the phononic analogue of index-guiding. We demonstrate an efficient transducer matched to 50 ohm and guiding within a 1-micron wide mechanical waveguide as key building blocks of this platform. Putting these components together, we realize acoustic delay lines, racetrack resonators, and meander line waveguides for sensing applications. To evaluate the promise of this platform for emerging quantum technologies, we characterize losses at low temperature and measure quality factors on the order of 50,000 at 4 kelvin. Finally, we demonstrate phononic four-wave mixing in these circuits and measure the nonlinear coefficients to provide estimates of the power needed for relevant parametric processes.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Cryogenic microwave-to-optical conversion using a triply-resonant lithium niobate on sapphire transducer
Authors:
Timothy P. McKenna,
Jeremy D. Witmer,
Rishi N. Patel,
Wentao Jiang,
Raphaël Van Laer,
Patricio Arrangoiz-Arriola,
E. Alex Wollack,
Jason F. Herrmann,
Amir H. Safavi-Naeini
Abstract:
Quantum networks are likely to have a profound impact on the way we compute and communicate in the future. In order to wire together superconducting quantum processors over kilometer-scale distances, we need transducers that can generate entanglement between the microwave and optical domains with high fidelity. We present an integrated electro-optic transducer that combines low-loss lithium niobat…
▽ More
Quantum networks are likely to have a profound impact on the way we compute and communicate in the future. In order to wire together superconducting quantum processors over kilometer-scale distances, we need transducers that can generate entanglement between the microwave and optical domains with high fidelity. We present an integrated electro-optic transducer that combines low-loss lithium niobate photonics with superconducting microwave resonators on a sapphire substrate. Our triply-resonant device operates in a dilution refrigerator and converts microwave photons to optical photons with an on-chip efficiency of $6.6\times 10^{-6}$ and a conversion bandwidth of 20 MHz. We discuss design trade-offs in this device, including strategies to manage acoustic loss, and outline ways to increase the conversion efficiency in the future.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
A silicon-organic hybrid platform for quantum microwave-to-optical transduction
Authors:
Jeremy D. Witmer,
Timothy P. McKenna,
Patricio Arrangoiz-Arriola,
Raphaël Van Laer,
E. Alex Wollack,
Francis Lin,
Alex K. -Y. Jen,
**gdong Luo,
Amir H. Safavi-Naeini
Abstract:
Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silic…
▽ More
Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silicon-organic hybrid photonics. Our device combines high quality factor microwave and optical resonators with an electro-optic polymer cladding to perform microwave-to-optical photon conversion from 6.7 GHz to 193 THz (1558 nm). The device achieves an electro-optic coupling rate of 330 Hz in a millikelvin dilution refrigerator environment. We use an optical heterodyne measurement technique to demonstrate the single-sideband nature of the conversion with a selectivity of approximately 10 dB. We analyze the effects of stray light in our device and suggest ways in which this can be mitigated. Finally, we present initial results on high-impedance spiral resonators designed to increase the electro-optic coupling.
△ Less
Submitted 21 December, 2019;
originally announced December 2019.
-
Alignment-free cryogenic optical coupling to an optomechanical crystal
Authors:
Timothy P. McKenna,
Rishi N. Patel,
Jeremy D. Witmer,
Raphaël Van Laer,
Joseph A. Valery,
Amir H. Safavi-Naeini
Abstract:
The need for highly accurate, labor-intensive optical alignment has been a major hurdle in our ability to leverage the power of complex photonic integrated circuits. There is a strong need for tolerant and passive alignment methods that enable interrogation at any point in a photonic circuit. Various promising and scalable photonic packaging techniques have been under development, but few methods…
▽ More
The need for highly accurate, labor-intensive optical alignment has been a major hurdle in our ability to leverage the power of complex photonic integrated circuits. There is a strong need for tolerant and passive alignment methods that enable interrogation at any point in a photonic circuit. Various promising and scalable photonic packaging techniques have been under development, but few methods compatible with low-temperature operation have been reported. Here, we demonstrate alignment-free $25\%$ coupling efficiency from an optical fiber to a silicon optomechanical crystal at 7 mK in a dilution refrigerator. Our coupling scheme uses angle-polished fibers glued to the surface of the chip. The technique paves the way for scalable integration of optical technologies at low temperatures, circumventing the need for optical alignment in a highly constrained cryogenic environment. The technique is broadly applicable to studies of low-temperature optical physics and to emerging quantum photonic technologies.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
Lithium Niobate Piezo-optomechanical Crystals
Authors:
Wentao Jiang,
Rishi N. Patel,
Felix M. Mayor,
Timothy P. McKenna,
Patricio Arrangoiz-Arriola,
Christopher J. Sarabalis,
Jeremy D. Witmer,
Raphaël Van Laer,
Amir H. Safavi-Naeini
Abstract:
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically t…
▽ More
Demonstrating a device that efficiently connects light, motion, and microwaves is an outstanding challenge in classical and quantum photonics. We make significant progress in this direction by demonstrating a photonic crystal resonator on thin-film lithium niobate (LN) that simultaneously supports high-$Q$ optical and mechanical modes, and where the mechanical modes are coupled piezoelectrically to microwaves. For optomechanical coupling, we leverage the photoelastic effect in LN by optimizing the device parameters to realize coupling rates $g_0/2π\approx 120~\textrm{kHz}$. An optomechanical cooperativity $C>1$ is achieved leading to phonon lasing. Electrodes on the nanoresonator piezoelectrically drive mechanical waves on the beam that are then read out optically allowing direct observation of the phononic bandgap. Quantum coupling efficiency of $η\approx10^{-8}$ from the input microwave port to the localized mechanical resonance is measured. Improvements of the microwave circuit and electrode geometry can increase this efficiency and bring integrated ultra-low-power modulators and quantum microwave-to-optical converters closer to reality.
△ Less
Submitted 3 March, 2019;
originally announced March 2019.
-
Electrical driving of X-band mechanical waves in a silicon photonic circuit
Authors:
Raphaël Van Laer,
Rishi N. Patel,
Timothy P. McKenna,
Jeremy D. Witmer,
Amir H. Safavi-Naeini
Abstract:
Reducing energy dissipation is a central goal of classical and quantum technologies. Optics achieved great success in bringing down power consumption of long-distance communication links. With the rise of mobile, quantum and cloud technologies, it is essential to extend this success to shorter links. Electro-optic modulators are a crucial contributor of dissipation in such links. Numerous variatio…
▽ More
Reducing energy dissipation is a central goal of classical and quantum technologies. Optics achieved great success in bringing down power consumption of long-distance communication links. With the rise of mobile, quantum and cloud technologies, it is essential to extend this success to shorter links. Electro-optic modulators are a crucial contributor of dissipation in such links. Numerous variations on important mechanisms such as free-carrier modulation and the Pockels effect are currently pursued, but there are few investigations of mechanical motion as an electro-optic mechanism in silicon. In this work, we demonstrate electrical driving and optical read-out of a 7.2 GHz mechanical mode of a silicon photonic waveguide. The electrical driving is capacitive and can be implemented in any material system. The measurements show that the mechanically-mediated optical phase modulation is two orders of magnitude more efficient than the background phase modulation in our system. Our demonstration is an important step towards efficient opto-electro-mechanical devices in a scalable photonic platform.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate
Authors:
Jeremy D. Witmer,
Joseph A. Valery,
Patricio Arrangoiz-Arriola,
Christopher J. Sarabalis,
Jeff T. Hill,
Amir H. Safavi-Naeini
Abstract:
Future quantum networks in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the dev…
▽ More
Future quantum networks in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the device. We demonstrate high quality factor ring, disk and photonic crystal resonators using a hybrid silicon-on-lithium-niobate material system. Optical quality factors up to 730,000 are achieved, corresponding to propagation loss of 0.8 dB/cm. We also use the electro-optic effect to modulate the resonance frequency of a photonic crystal cavity, achieving a electro-optic modulation coefficient between 1 and 2 pm/V. In addition to quantum technology, we expect that our results will be useful both in traditional silicon photonics applications and in high-sensitivity acousto-optic devices.
△ Less
Submitted 7 December, 2016;
originally announced December 2016.
-
Design of nanobeam photonic crystal resonators for a silicon-on-lithium-niobate platform
Authors:
Jeremy D. Witmer,
Jeff T. Hill,
Amir H. Safavi-Naeini
Abstract:
We outline the design for a photonic crystal resonator made in a hybrid Silicon/Lithium Niobate material system. Using the index contrast between silicon and lithium niobate, it is possible to guide and confine photonic resonances in a thin film of silicon bonded on top of lithium niobate. Quality factors greater than $10^6$ at optical wavelength scale mode volumes are achievable. We show that pat…
▽ More
We outline the design for a photonic crystal resonator made in a hybrid Silicon/Lithium Niobate material system. Using the index contrast between silicon and lithium niobate, it is possible to guide and confine photonic resonances in a thin film of silicon bonded on top of lithium niobate. Quality factors greater than $10^6$ at optical wavelength scale mode volumes are achievable. We show that patterning electrodes on such a system can yield an electro-optic coupling rate of 0.6 GHz/V (4 pm/V).
△ Less
Submitted 19 April, 2016;
originally announced April 2016.