-
Harnessing a Vibroacoustic Mode for Enabling Smart Functions on Surface Acoustic Wave Devices -- Application to Icing Monitoring and Deicing
Authors:
Atefeh Karimzadeh,
Uhland Weissker,
Jaime del Moral,
Andreas Winkler,
Ana Borrás,
Agustin R. González-Elipe,
Stefan Jacob
Abstract:
Microacoustic wave devices are essential components in the RF electronics and MEMS industry with increasing impact in various sensing and actuation applications. Reliable and smart operation of acoustic wave devices at low costs would cause a crucial advancement. Herein, we present the enablement of temperature and mechanical sensing capabilities in a Rayleigh-mode standing surface acoustic wave (…
▽ More
Microacoustic wave devices are essential components in the RF electronics and MEMS industry with increasing impact in various sensing and actuation applications. Reliable and smart operation of acoustic wave devices at low costs would cause a crucial advancement. Herein, we present the enablement of temperature and mechanical sensing capabilities in a Rayleigh-mode standing surface acoustic wave (sSAW) chip device by harnessing an acoustic shear plate wave mode using the same set of electrodes. Most importantly, this mode is excited by switching the polarity of the sSAW transducer electrodes by simple electronics, allowing for direct and inexpensive compatibility with an existing setup. We validated the method in the emergent topic of surface de-icing by continuously monitoring temperature and water liquid-solid phase changes using the plate wave mode, and on-demand Rayleigh-wave deicing with a negligible energy cost. The flexibility for adapting the system to different scenarios, loads and scalability opens the path to impact in lab-on-a-chip, IoT technology, and sectors requiring autonomous acoustic wave actuators.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
Acoustic Resonance Effects and Cavitation in SAW Aerosol Generation
Authors:
Mehrzad Roudini,
Juan Manuel Rosselló,
Ofer Manor,
Claus-Dieter Ohl,
Andreas Winkler
Abstract:
The interaction of surface acoustic waves (SAWs) with liquids enables the production of aerosols with adjustable droplet sizes in the micrometer range expelled from a very compact source. Understanding the nonlinear acousto-hydrodynamics of SAWs with a regulated micro-scale liquid film is essential for acousto-microfluidics platforms, particularly aerosol generators. In this study, we demonstrate…
▽ More
The interaction of surface acoustic waves (SAWs) with liquids enables the production of aerosols with adjustable droplet sizes in the micrometer range expelled from a very compact source. Understanding the nonlinear acousto-hydrodynamics of SAWs with a regulated micro-scale liquid film is essential for acousto-microfluidics platforms, particularly aerosol generators. In this study, we demonstrate the presence of micro-cavitation in an MHz-frequency SAW aerosol generation platform, which is touted as a leap in aerosol technology with versatile application fields including biomolecule inhalation therapy, micro-chromatography and spectroscopy, olfactory displays, and material deposition. Using analysis methods with high temporal and spatial resolution, we demonstrate that SAWs stabilize spatially arranged liquid micro-domes atop the generator's surface. Our experiments show that these liquid domes become acoustic resonators with highly fluctuating pressure amplitudes that can even nucleate cavitation bubbles, as supported by analytical modeling. The observed fragmentation of liquid domes indicates the participation of three droplet generation mechanisms, including cavitation and capillary-wave instabilities. During aerosol generation, the cavitation bubbles contribute to the ejection of droplets from the liquid domes and also explain observed microstructural damage patterns on the chip surface eventually caused by cavitation-based erosion.
△ Less
Submitted 3 June, 2023;
originally announced June 2023.
-
GEANT4 simulation and spectrum restoration of a pixelated X-ray detector
Authors:
Andrii Tykhonov,
Alexander Winkler,
Volodymyr Smoliar
Abstract:
We perform a detailed simulation of a pixelated CdTe detector using the GEANT4 toolkit completed with a custom code emulating the detector's electronic response. We demonstrate that a measured tungsten X-ray spectrum can be majorly restored back to the original incident spectrum using the developed model, without requiring the dedicated hardware charge sharing correction.
We perform a detailed simulation of a pixelated CdTe detector using the GEANT4 toolkit completed with a custom code emulating the detector's electronic response. We demonstrate that a measured tungsten X-ray spectrum can be majorly restored back to the original incident spectrum using the developed model, without requiring the dedicated hardware charge sharing correction.
△ Less
Submitted 13 March, 2023; v1 submitted 26 December, 2022;
originally announced December 2022.
-
Atomic scale modeling of water and ice behavior on vibrating surfaces: towards design of Surface Acoustic Wave anti-icing and de-icing systems
Authors:
Tomasz Wejrzanowski,
Stefan Jacob,
Andreas Winkler,
Agustín R. González-Elipe,
Ana Borrás
Abstract:
Within these studies, atomic scale molecular dynamics simulations have been performed to analyze the behavior of water droplets and ice clusters on hydrophilic and hydrophobic surfaces subjected to high-frequency vibrations. The methodology applied herewith aimed at understanding the phenomena governing the anti-icing and de-icing process enabled by Surface Acoustic Waves (SAWs). The complex wave…
▽ More
Within these studies, atomic scale molecular dynamics simulations have been performed to analyze the behavior of water droplets and ice clusters on hydrophilic and hydrophobic surfaces subjected to high-frequency vibrations. The methodology applied herewith aimed at understanding the phenomena governing the anti-icing and de-icing process enabled by Surface Acoustic Waves (SAWs). The complex wave propagation was simplified by in-plane and out-of-plane substrate vibrations, which are relevant to individual longitudinal and transverse components of SAWs. Since the efficiency of such an active system depends on the energy transfer from the vibrating substrate to water or ice, the agents influencing such transfer as well as the accompanied phenomena were studied in detail. Apart from the polarization of the substrate vibrations (in-plane/out-of-plane), the amplitude and frequency of these vibrations were analyzed through atomic scale modeling. Further, the surface wettability effect was introduced as a critical factor within the simulation of water or ice sitting on the vibrating substrate. The results of these studies allow identifying the different phenomena responsible for water and ice removal from vibrating surfaces depending on the wave amplitude and frequency. The importance of substrate wetting for the ant-icing and de-icing has also been analyzed and discussed concerning the future design and optimization of SAW-based systems.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Thermal-Inertial Effects on Relativistic Asymmetric Magnetic Reconnection
Authors:
Maricarmen A. Winkler,
Felipe A. Asenjo
Abstract:
A general description for relativistic magnetic reconnection is given in terms of asymmetric inflow plasma conditions, such as plasma density, velocity magnetic field strength, and their respective thermal-inertial effects. In this work, we show that thermal-inertial effects increase reconnection rates, generalizing previous results. Furthermore, different reconnection rates can be defined dependi…
▽ More
A general description for relativistic magnetic reconnection is given in terms of asymmetric inflow plasma conditions, such as plasma density, velocity magnetic field strength, and their respective thermal-inertial effects. In this work, we show that thermal-inertial effects increase reconnection rates, generalizing previous results. Furthermore, different reconnection rates can be defined depending on the initial asymmetric conditions for the inflow plasma into the reconnection region. We explore two possibilities for reconnection rates, which, depending on the asymmetric magnetization, display different strengths. We discuss the importance on defining appropriate reconnection rates for corresponding asymmetric plasma systems in the context of previous results.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Surface Acoustic Waves Equip Materials with Active Deicing Functionality: Unraveled Deicing Mechanisms and Application to Centimeter Scale Transparent Surfaces
Authors:
Stefan Jacob,
Shilpi Pandey,
Jaime Del Moral,
Atefeh Karimzadeh,
Jorge Gil-Rostra,
Agustín R. González-Elipe,
Ana Borrás,
Andreas Winkler
Abstract:
Migrating active deicing capabilities to transparent materials with low thermal conductivity has a high potential to improve the operations of several seminal industries in the automotive, robotic, energy, and aerospace sectors. However, the development of efficient and environmentally friendly deicing methods is yet in its infancy regarding their compatibility with end-user surfaces at relevant s…
▽ More
Migrating active deicing capabilities to transparent materials with low thermal conductivity has a high potential to improve the operations of several seminal industries in the automotive, robotic, energy, and aerospace sectors. However, the development of efficient and environmentally friendly deicing methods is yet in its infancy regarding their compatibility with end-user surfaces at relevant scales and real-world operations. Herein, we approach deicing through nanoscale surface activation enabled by surface acoustic waves (SAWs), allowing efficient on-demand deicing of surface areas spanning several square centimeters covered with thick layers of glace ice. We contemplate SAW-based deicing from a twofold perspective: First, we demonstrate its functionality both with a bulk piezoelectric material (LiNbO3) and a piezo-electric film (ZnO), the latter proving its versatile applicability to a large variety of functional materials with practical importance; second, we gain fundamental knowledge of the mechanisms responsible for efficient deicing using SAWs. In particular, we show that SAW vibrational modes easily transport energy over greater distances outside the electrode areas and efficiently melt large ice aggregates covering the materials' surfaces. In addition, the essential physics of SAW-based deicing is inferred from a carefully designed experimental and numerical study. We support our findings by providing macroscopic camera snapshots captured in situ inside a climate chamber during deicing and highly resolved laser-doppler vibrometer scans of the undisturbed wavefields at room temperature. Great care was taken to deposit the interdigital transducers (IDTs) used for SAW excitation only on ice-free areas close to the chip edges, leaving most of the substrate used for deicing unaltered and, as a matter of fact, demonstrating transparent deicing solutions.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Exact and paraxial Airy propagation of relativistic electron plasma wavepackets
Authors:
Maricarmen A. Winkler,
Camilo Vásquez-Wilson,
Felipe A. Asenjo
Abstract:
The different forms of propagation of relativistic electron plasma wavepackets in terms of Airy functions are studied. It is shown that exact solutions can be constructed showing accelerated propagations along coordinates transverse to the thermal speed cone coordinate. Similarly, Airy propagation is a solution for relativistic electron plasma waves in the paraxial approximation. This regime is co…
▽ More
The different forms of propagation of relativistic electron plasma wavepackets in terms of Airy functions are studied. It is shown that exact solutions can be constructed showing accelerated propagations along coordinates transverse to the thermal speed cone coordinate. Similarly, Airy propagation is a solution for relativistic electron plasma waves in the paraxial approximation. This regime is considered in time-domain, when paraxial approximation is considered for frequency, and in space-domain, when paraxial approximation is considered for wavelength. In both different cases, the wavepackets remains structured in the transverse plane. Using these solutions we are able to define generalized and arbitrary Airy wavepackets for electron plasma waves, depeding on arbitrary spectral functions. Examples of this construction are presented. These electron plasma Airy wavepackets are the most general solutions of this kind.
△ Less
Submitted 8 June, 2023; v1 submitted 1 August, 2022;
originally announced August 2022.
-
Quality assessment of Cadmium Telluride as a detector material for multispectral medical imaging
Authors:
S. Kirschenmann,
M. Bezak,
S. Bharthuar,
E. Brücken,
M. Golovleva,
A. Gädda,
M. Kalliokoski,
A. Karadzhinova-Ferrer,
P. Koponen,
N. Kramarenko,
P. Luukka,
J. Ott,
J. Tikkanen,
R. Turpeinen,
A. Winkler
Abstract:
Cadmium Telluride (CdTe) is a high-Z material with excellent photon radiation absorption properties, making it a promising material to include in radiation detection technologies. However, the brittleness of CdTe crystals as well as their varying concentration of defects necessitate a thorough quality assessment before the complex detector processing procedure. We present our quality assessment of…
▽ More
Cadmium Telluride (CdTe) is a high-Z material with excellent photon radiation absorption properties, making it a promising material to include in radiation detection technologies. However, the brittleness of CdTe crystals as well as their varying concentration of defects necessitate a thorough quality assessment before the complex detector processing procedure. We present our quality assessment of CdTe as a detector material for multispectral medical imaging, a research which is conducted as part of the Consortium Project Multispectral Photon-counting for Medical Imaging and Beam characterization (MPMIB). The aim of the project is to develop novel CdTe detectors and obtain spectrum-per-pixel information that make the distinction between different radiation types and tissues possible. To evaluate the defect density inside the crystals -- which can deteriorate the detector performance -- we employ infrared microscopy (IRM). Posterior data analysis allows us to visualise the defect distributions as 3D defect maps. Additionally, we investigate front and backside differences of the material with current-voltage (IV) measurements to determine the preferred surface for the pixelisation of the crystal, and perform test measurements with the prototypes to provide feedback for further processing. We present the different parts of our quality assessment chain and will close with first experimental results obtained with one of our prototype PC detectors in a small tomographic setup.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Existence of Korteweg-de Vries Solitons and Relevance of Relativistic Effects in a Dusty Electron-Ion Plasma
Authors:
Maricarmen A. Winkler,
Víctor Muñoz,
Felipe A. Asenjo
Abstract:
Nonlinear effects in the propagation of perturbations in a dusty electron-ion plasma is studied, considering fully relativistic wave motion. A multifluid model is considered for the particles, from which a KdV equation can be derived. In general, two different soliton solutions are found depending on the kind of dispersion of the KdV equation. We study when the dispersion coefficient of this equat…
▽ More
Nonlinear effects in the propagation of perturbations in a dusty electron-ion plasma is studied, considering fully relativistic wave motion. A multifluid model is considered for the particles, from which a KdV equation can be derived. In general, two different soliton solutions are found depending on the kind of dispersion of the KdV equation. We study when the dispersion coefficient of this equation is positive. In this case, two kind of behavior are possible, one associated with a slow wave mode, another with a fast wave mode. It is shown that, depending on the value of the system parameters, compressive and/or rarefactive solitons, or no soliton at all, can be found and that relativistic effects for ions are much more relevant than for electrons. It is also found that relativistic effects can strongly decrease the soliton amplitude for the slow mode, whereas for the fast mode they can lead to compressive-rarefactive soliton transitions and vice versa, depending on the dust charge density in both modes.
△ Less
Submitted 26 August, 2023; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Employing infrared microscopy (IRM) in combination with a pre-trained neural network to visualise and analyse the defect distribution in Cadmium Telluride crystals
Authors:
S. Kirschenmann,
S. Bharthuar,
E. Brücken,
M. Golovleva,
A. Gädda,
M. Kalliokoski,
P. Luukka,
J. Ott,
A. Winkler
Abstract:
While Cadmium Telluride (CdTe) excels in terms of photon radiation absorption properties and outperforms silicon (Si) in this respect, the crystal growth, characterization and processing into a radiation detector is much more complicated. Additionally, large concentrations of extended crystallographic defects, such as grain boundaries, twins, and tellurium (Te) inclusions, vary from crystal to cry…
▽ More
While Cadmium Telluride (CdTe) excels in terms of photon radiation absorption properties and outperforms silicon (Si) in this respect, the crystal growth, characterization and processing into a radiation detector is much more complicated. Additionally, large concentrations of extended crystallographic defects, such as grain boundaries, twins, and tellurium (Te) inclusions, vary from crystal to crystal and can reduce the spectroscopic performance of the processed detector. A quality assessment of the material prior to the complex fabrication process is therefore crucial. To locate the Te-defects, we scan the crystals with infrared microscopy (IRM) in different layers, obtaining a 3D view of the defect distribution. This provides us with important information on the defect density and locations of Te inclusions, and thus a handle to assess the quality of the material. For the classification of defects in the large amount of IRM image data, a convolutional neural network is employed. From the post-processed and analysed IRM data, 3D defect maps of the CdTe crystals are created, which make different patterns of defect agglomerations inside the crystals visible. In total, more than 100 crystals were scanned with the current IRM setup. In this paper, we compare two crystal batches, each consisting of 12 samples. We find significant differences in the defect distributions of the crystals.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
Stretchable self-tuning MRI receive coils based on liquid metal technology (LiquiTune)
Authors:
Elizaveta Motovilova,
Ek Tsoon Tan,
Victor Taracila,
Jana M. Vincent,
Thomas Grafendorfer,
James Shin,
Hollis G. Potter,
Fraser J. L. Robb,
Darryl B. Sneag,
Simone A. Winkler
Abstract:
Magnetic resonance imaging systems rely on signal detection via radiofrequency coil arrays which, ideally, need to provide both bendability and form-fitting stretchability to conform to the imaging volume. However, most commercial coils are rigid and of fixed size with a substantial mean offset distance of the coil from the anatomy, which compromises the spatial resolution and diagnostic image qua…
▽ More
Magnetic resonance imaging systems rely on signal detection via radiofrequency coil arrays which, ideally, need to provide both bendability and form-fitting stretchability to conform to the imaging volume. However, most commercial coils are rigid and of fixed size with a substantial mean offset distance of the coil from the anatomy, which compromises the spatial resolution and diagnostic image quality as well as patient comfort. Here, we propose a soft and stretchable receive coil concept based on liquid metal and ultra-stretchable polymer that conforms closely to a desired anatomy. Moreover, its smart geometry provides a self-tuning mechanism to maintain a stable resonance frequency over a wide range of elongation levels. Theoretical analysis and numerical simulations were experimentally confirmed and demonstrated that the proposed coil withstood the unwanted frequency detuning typically observed with other stretchable coils (0.4% for the proposed coil as compared to 4% for a comparable control coil). Moreover, the signal-to-noise ratio of the proposed coil increased by up to 60% as compared to a typical, rigid, commercial coil.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
MRSaiFE: Tissue Heating Prediction for MRI: a Feasibility Study
Authors:
Simone Angela Winkler,
Isabelle Saniour,
Akshay Chaudhari,
Fraser Robb,
J Thomas Vaughan
Abstract:
A to-date unsolved and highly limiting safety concern for Ultra High-Field (UHF) magnetic resonance imaging (MRI) is the deposition of radiofrequency (RF) power in the body, quantified by the specific absorption rate (SAR), leading to dangerous tissue heating/damage in the form of local SAR hotspots that cannot currently be measured/monitored, thereby severely limiting the applicability of the tec…
▽ More
A to-date unsolved and highly limiting safety concern for Ultra High-Field (UHF) magnetic resonance imaging (MRI) is the deposition of radiofrequency (RF) power in the body, quantified by the specific absorption rate (SAR), leading to dangerous tissue heating/damage in the form of local SAR hotspots that cannot currently be measured/monitored, thereby severely limiting the applicability of the technology for clinical practice and in regulatory approval. The goal of this study has been to show proof of concept of an artificial intelligence (AI) based exam-integrated real-time MRI safety prediction software (MRSaiFE) facilitating the safe generation of 3T and 7T images by means of accurate local SAR-monitoring at sub-W/kg levels. We trained the software with a small database of image as a feasibility study and achieved successful proof of concept for both field strengths. SAR patterns were predicted with a residual root mean squared error (RSME) of <11% along with a structural similarity (SSIM) level of >84% for both field strengths (3T and 7T).
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
Multispectral Photon-Counting for Medical Imaging and Beam Characterization
Authors:
E. Brücken,
S. Bharthuar,
M. Emzir,
M. Golovleva,
A. Gädda,
R. Hostettler,
J. Härkönen,
S. Kirschenmann,
V. Litichevskyi,
P. Luukka,
L. Martikainen,
T. Naaranoja,
I. Nincă,
J. Ott,
H. Petrow,
Z. Purisha,
T. Siiskonen,
S. Särkkä,
J. Tikkanen,
T. Tuuva,
A. Winkler
Abstract:
We present the current status of our project of develo** a photon counting detector for medical imaging. An example motivation lays in producing a monitoring and dosimetry device for boron neutron capture therapy, currently not commercially available. Our approach combines in-house developed detectors based on cadmium telluride or thick silicon with readout chip technology developed for particle…
▽ More
We present the current status of our project of develo** a photon counting detector for medical imaging. An example motivation lays in producing a monitoring and dosimetry device for boron neutron capture therapy, currently not commercially available. Our approach combines in-house developed detectors based on cadmium telluride or thick silicon with readout chip technology developed for particle physics experiments at CERN. Here we describe the manufacturing process of our sensors as well as the processing steps for the assembly of first prototypes. The prototypes use currently the PSI46digV2.1-r readout chip. The accompanying readout electronics chain that was used for first measurements will also be discussed. Finally we present an advanced algorithm developed by us for image reconstruction using such photon counting detectors with focus on boron neutron capture therapy. This work is conducted within a consortium of Finnish research groups from Helsinki Institute of Physics, Aalto University, Lappeenranta-Lahti University of Technology LUT and Radiation and Nuclear Safety Authority (STUK) under the RADDESS program of Academy of Finland. Keywords: Solid state detectors, X-ray detectors, Gamma detectors, Neutron detectors, Instrumentation for hadron therapy, Medical-image reconstruction methods and algorithms.
△ Less
Submitted 20 February, 2020; v1 submitted 8 January, 2020;
originally announced January 2020.
-
Impressive computational acceleration by using machine learning for 2-dimensional super-lubricant materials discovery
Authors:
Marco Fronzi,
Mutaz Abu Ghazaleh,
Olexandr Isayev,
David A. Winkler,
Joe Shapter,
Michael J. Ford
Abstract:
The screening of novel materials is an important topic in the field of materials science. Although traditional computational modeling, especially first-principles approaches, is a very useful and accurate tool to predict the properties of novel materials, it still demands extensive and expensive state-of-the-art computational resources. Additionally, they can be often extremely time consuming. We…
▽ More
The screening of novel materials is an important topic in the field of materials science. Although traditional computational modeling, especially first-principles approaches, is a very useful and accurate tool to predict the properties of novel materials, it still demands extensive and expensive state-of-the-art computational resources. Additionally, they can be often extremely time consuming. We describe a time and resource-efficient machine learning approach to create a large dataset of structural properties of van der Waals layered structures. In particular, we focus on the interlayer energy and the elastic constant of layered materials composed of two different 2-dimensional (2D) structures, that are important for novel solid lubricant and super-lubricant materials. We show that machine learning models can recapitulate results of computationally expansive approaches (i.e. density functional theory) with high accuracy.
△ Less
Submitted 29 July, 2020; v1 submitted 20 November, 2019;
originally announced November 2019.
-
Global Occurrence and Chemical Impact of Stratospheric Blue Jets Modeled With WACCM4
Authors:
F. J. Pérez-Invernón,
F. J. Gordillo-Vázquez,
A. K. Smith,
E. Arnone. H. Winkler
Abstract:
In this work we present the first parameterizations of the global occurrence rate and chemical influence of Blue Jets, a type of Transient Luminous Event (TLE) taking place in the stratospheric region above thunderclouds. These parameterizations are directly coupled with five different lightning parameterizations implemented in the Whole Atmosphere Community Climate Model (WACCM4). We have obtaine…
▽ More
In this work we present the first parameterizations of the global occurrence rate and chemical influence of Blue Jets, a type of Transient Luminous Event (TLE) taking place in the stratospheric region above thunderclouds. These parameterizations are directly coupled with five different lightning parameterizations implemented in the Whole Atmosphere Community Climate Model (WACCM4). We have obtained a maximum Blue Jet global occurrence rate of about 0.9 BJ per minute. The geographical occurrence of Blue Jets is closely related to the chosen lightning parameterization. Some previously developed local chemical models of Blue Jets predicted an important influence onto the stratospheric concentration of N$_2$O, NO$_x$ and O$_3$. We have used these results together with our global implementations of Blue Jets in WACCM4 to estimate their global chemical influence in the atmosphere. According to our results, Blue Jets can inject about 3.8 Tg N$_2$O-N yr$^{-1}$ and 0.07 Tg NO-N yr$^{-1}$ near the stratosphere, where N$_2$O-N and NO-N stand for the mass of nitrogen atoms in N$_2$O and NO molecules, respectively. These production rates of N$_2$O and NO$_x$ could have a direct impact on, for example, the acidity of rainwater or the greenhouse effect. We have found that Blue Jets could also slightly contribute to the depletion of stratospheric ozone. In particular, we have estimated that the maximum difference in the concentration of O$_3$ at 30 km of altitude between simulations with and without Blue Jets can be about -5 \% in Equatorial and Polar regions.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
A gaseous proportional counter built from a conventional aluminium beverage can
Authors:
Alexander Winkler,
Aneliya Karadzhinova,
Timo Hildén,
Francisco Garcia,
Giacomo Fedi,
Francesco Devoto,
Erik J. Brücken
Abstract:
The gaseous proportional counter is a device that can be used to detect ionizing radiation. These devices can be as simple as a cylindrical cathode and a very thin anode wire centered along its axis. By applying a high voltage, a strong electric field is generated close to the anode wire. Ion-pairs, generated by passing ionizing radiation, create avalanches once they drift into the strong electric…
▽ More
The gaseous proportional counter is a device that can be used to detect ionizing radiation. These devices can be as simple as a cylindrical cathode and a very thin anode wire centered along its axis. By applying a high voltage, a strong electric field is generated close to the anode wire. Ion-pairs, generated by passing ionizing radiation, create avalanches once they drift into the strong electric field region near the anode. The electrical charges created by the avalanche generate an observable signal which is proportional to the energy loss of the incoming radiation. We discuss the construction of such a device. Our detector was built from an ordinary aluminium beverage can and uses a common electric wire strand as the anode. The construction of this detector offers students at universities or technically oriented high schools a detailed understanding of the design and operation of gaseous radiation detectors. The equipment required to complete the project should be available at most institutions.
△ Less
Submitted 2 February, 2024; v1 submitted 8 September, 2015;
originally announced September 2015.
-
Processing and characterization of epitaxial GaAs radiation detectors
Authors:
X. Wu,
T. Peltola,
T. Arsenovich,
A. Gädda,
J. Härkönen,
A. Junkes,
A. Karadzhinova,
P. Kostamo,
H. Lipsanen,
P. Luukka,
M. Mattila,
S. Nenonen,
T. Riekkinen,
E. Tuominen,
A. Winkler
Abstract:
GaAs devices have relatively high atomic numbers (Z=31, 33) and thus extend the X-ray absorption edge beyond that of Si (Z=14) devices. In this study, radiation detectors were processed on GaAs substrates with 110 $μ\textrm{m}$ - 130 $μ\textrm{m}$ thick epitaxial absorption volume. Thick undoped and heavily doped p$^+$ epitaxial layers were grown using a custom-made horizontal Chloride Vapor Phase…
▽ More
GaAs devices have relatively high atomic numbers (Z=31, 33) and thus extend the X-ray absorption edge beyond that of Si (Z=14) devices. In this study, radiation detectors were processed on GaAs substrates with 110 $μ\textrm{m}$ - 130 $μ\textrm{m}$ thick epitaxial absorption volume. Thick undoped and heavily doped p$^+$ epitaxial layers were grown using a custom-made horizontal Chloride Vapor Phase Epitaxy (CVPE) reactor, the growth rate of which was about 10 $μ\textrm{m}$/h. The GaAs p$^+$/i/n$^+$ detectors were characterized by Capacitance Voltage ($CV$), Current Voltage ($IV$), Transient Current Technique (TCT) and Deep Level Transient Spectroscopy (DLTS) measurements. The full depletion voltage ($V_{\textrm{fd}}$) of the detectors with 110 $μ\textrm{m}$ epi-layer thickness is in the range of 8 V - 15 V and the leakage current density is about 10 nA/cm$^2$. The signal transit time determined by TCT is about 5 ns when the bias voltage is well above the value that produces the peak saturation drift velocity of electrons in GaAs at a given thickness. Numerical simulations with an appropriate defect model agree with the experimental results.
△ Less
Submitted 13 March, 2015;
originally announced March 2015.
