Showing 1–50 of 52 results for author: Wilson, M

Light Dark Matter Constraints from SuperCDMS HVeV Detectors Operated Underground with an Anticoincidence Event Selection

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. Alonso-González, D. W. P. Amaral, J. Anczarski, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, C. Bathurst, R. Bhattacharyya, A. J. Biffl, P. L. Brink, M. Buchanan, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, J. -H. Chen , et al. (115 additional authors not shown)

Abstract: This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon k… ▽ More This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon kinetic mixing and axion-like particle axioelectric coupling for masses between 1.2 and 23.3 eV/$c^2$. Compared to an earlier HVeV search, sensitivity was improved as a result of an increased overburden of 225 meters of water equivalent, an anticoincidence event selection, and better pile-up rejection. In the case of dark-matter-electron scattering via a heavy mediator, an improvement by up to a factor of 25 in cross-section sensitivity was achieved. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 7 pages + title and references, 4 figures, and 1 table

Improved Modelling of Detector Response Effects in Phonon-based Crystal Detectors used for Dark Matter Searches

Authors: M. J. Wilson, A. Zaytsev, B. von Krosigk, I. Alkhatib, M. Buchanan, R. Chen, M. D. Diamond, E. Figueroa-Feliciano, S. A. S. Harms, Z. Hong, K. T. Kennard, N. A. Kurinsky, R. Mahapatra, N. Mirabolfathi, V. Novati, M. Platt, R. Ren, A. Sattari, B. Schmidt, Y. Wang, S. Zatschler, E. Zhang, A. Zuniga

Abstract: Various dark matter search experiments employ phonon-based crystal detectors operated at cryogenic temperatures. Some of these detectors, including certain silicon detectors used by the SuperCDMS Collaboration, are able to achieve single-charge sensitivity when a voltage bias is applied across the detector. The total amount of phonon energy measured by such a detector is proportional to the number… ▽ More Various dark matter search experiments employ phonon-based crystal detectors operated at cryogenic temperatures. Some of these detectors, including certain silicon detectors used by the SuperCDMS Collaboration, are able to achieve single-charge sensitivity when a voltage bias is applied across the detector. The total amount of phonon energy measured by such a detector is proportional to the number of electron-hole pairs created by the interaction. However, crystal impurities and surface effects can cause propagating charges to either become trapped inside the crystal or create additional unpaired charges, producing non-quantized measured energy as a result. A new analytical model for describing these detector response effects in phonon-based crystal detectors is presented. This model improves upon previous versions by demonstrating how the detector response, and thus the measured energy spectrum, is expected to differ depending on the source of events. We use this model to extract detector response parameters for SuperCDMS HVeV detectors, and illustrate how this robust modelling can help statistically discriminate between sources of events in order to improve the sensitivity of dark matter search experiments. △ Less

Submitted 24 June, 2024; v1 submitted 2 March, 2024; originally announced March 2024.

Comments: 19 pages, 7 figures

Journal ref: Phys. Rev. D 109, 112018 (2024)

The principal components of electoral regimes -- Separating autocracies from pseudo-democracies

Authors: Karoline Wiesner, Samuel Bien, Matthew C. Wilson

Abstract: A critical issue for society today is the emergence and decline of democracy worldwide. It is unclear, however, how democratic features, such as elections and civil liberties, influence this change. Democracy indices, which are the standard tool to study this question, are based on the a priori assumption that improvement in any individual feature strengthens democracy overall. We show that this a… ▽ More A critical issue for society today is the emergence and decline of democracy worldwide. It is unclear, however, how democratic features, such as elections and civil liberties, influence this change. Democracy indices, which are the standard tool to study this question, are based on the a priori assumption that improvement in any individual feature strengthens democracy overall. We show that this assumption does not always hold. We use the V-Dem dataset for a quantitative study of electoral regimes worldwide during the 20th century. We find a so-far overlooked trade-off between election quality and civil liberties. In particular, we identify a threshold in the democratisation process at which the correlation between election quality and civil liberties flips from negative to positive. Below this threshold we can thus clearly separate two kinds of non-democratic regimes: autocracies that govern through tightly controlled elections and regimes in which citizens are free but under less certainty -- a distinction that existing democracy indices cannot make. We discuss the stabilising role of election quality uncovered here in the context of the recently observed decline in democracy score of long-standing democracies, so-called `democratic backsliding' or `democratic recession'. △ Less

Submitted 17 February, 2024; originally announced February 2024.

Spin injection across a III-V/chiral perovskite interface enabling spin accumulation at room temperature

Authors: Matthew P. Hautzinger, Xin Pan, Steven C. Hayden, Jiselle Y. Ye, Qi Jiang, Mickey J. Wilson, Yifan Dong, Emily K. Raulerson, Ian A. Leahy, Chun-Sheng Jiang, Joseph M. Luther, Yuan Lu, Katherine Jungjohann, Z. Valy Vardeny, Joseph J. Berry, Kirstin Alberi, Matthew C. Beard

Abstract: Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of opto-electronic functionality. Current efforts are limited due to inherent inefficiencies associated with spin injection into semiconductor structures. Here, we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a… ▽ More Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of opto-electronic functionality. Current efforts are limited due to inherent inefficiencies associated with spin injection into semiconductor structures. Here, we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a standard semiconductor III-V (AlxGa1-x)0.5In0.5P multiple quantum well (MQW) light emitting diode (LED). The spin accumulation in the MQW is detected via emission of circularly polarized light with a degree of polarization of up to ~15%. The chiral perovskite/III-V interface was characterized with X-ray photoemission spectroscopy (XPS), cross sectional scanning Kelvin probe force microscopy, and cross section transmission electron microscopy (TEM) imaging, showing a clean semiconductor/semiconductor interface where the fermi-level can equilibrate. These findings demonstrate chiral perovskite semiconductors can transform well-developed semiconductor platforms to ones that can also control spin. △ Less

Submitted 14 November, 2023; v1 submitted 8 September, 2023; originally announced September 2023.

Microplastic and natural sediment in bed load saltation: material does not dictate the fate

Authors: James Lofty, Daniel Valero, Catherine A. M. E. Wilson, Mário J. Franca, Pablo Ouro

Abstract: Microplastic (MP) pollution is a well document threat to our aquatic and terrestrial ecosystems, however, the mechanisms by which MPs are transported in river flows are still unknown. The transport of MPs and natural sediment in aquatic flows could be somewhat comparable, as particles are similar in size. However, it is unknown how the lower density of MPs and their different material properties i… ▽ More Microplastic (MP) pollution is a well document threat to our aquatic and terrestrial ecosystems, however, the mechanisms by which MPs are transported in river flows are still unknown. The transport of MPs and natural sediment in aquatic flows could be somewhat comparable, as particles are similar in size. However, it is unknown how the lower density of MPs and their different material properties impact their transport dynamics. To answer this, novel laboratory experiments on bed load saltation dynamics in an open-channel flow, using high-speed camera imaging and the detection of 11,035 individual saltation events were used to identify the similarities and differences between spherical MPs and spherical natural sediments transport. The tested MPs varied in terms of size and material properties (density and elasticity). Our analysis shows that the Rouse number accurately describes saltation length, height, transport velocity and collision angles equally well for both MPs and natural sediments. Through statistical inference, the distribution functions of saltation trajectory characteristics for MPs were analogous to natural sediment with only one sediment experiment (1.4 % of cases) differing from all other plastic experiments. Similarly, only nine experiments (9.3 % of cases) showed that collision angles for MPs differed from those of natural sediment experiments. Differences observed in terms of restitution become negligible in overall transport dynamics as turbulence overcomes the kinetic energy lost at particle-bed impact, which keeps particle motion independent from impact. Overall, spherical MP particles behave similarly to spherical natural sediments in aquatic environments under the examined experimental conditions. This is significant because there is an established body of knowledge for sediment transport that can serve as a foundation for the study of MP transport. △ Less

Submitted 12 July, 2023; v1 submitted 27 March, 2023; originally announced March 2023.

Journal ref: Water Research, 120329 (2023)

Enhancing the sensitivity of atom-interferometric inertial sensors using robust control

Authors: J. C. Saywell, M. S. Carey, P. S. Light, S. S. Szigeti, A. R. Milne, K. S. Gill, M. L. Goh, V. S. Perunicic, N. M. Wilson, C. D. Macrae, A. Rischka, P. J. Everitt, N. P. Robins, R. P. Anderson, M. R. Hush, M. J. Biercuk

Abstract: Atom-interferometric quantum sensors could revolutionize navigation, civil engineering, and Earth observation. However, operation in real-world environments is challenging due to external interference, platform noise, and constraints on size, weight, and power. Here we experimentally demonstrate that tailored light pulses designed using robust control techniques mitigate significant error sources… ▽ More Atom-interferometric quantum sensors could revolutionize navigation, civil engineering, and Earth observation. However, operation in real-world environments is challenging due to external interference, platform noise, and constraints on size, weight, and power. Here we experimentally demonstrate that tailored light pulses designed using robust control techniques mitigate significant error sources in an atom-interferometric accelerometer. To mimic the effect of unpredictable lateral platform motion, we apply laser-intensity noise that varies up to 20$\%$ from pulse-to-pulse. Our robust control solution maintains performant sensing, while the utility of conventional pulses collapses. By measuring local gravity, we show that our robust pulses preserve interferometer scale factor and improve measurement precision by 10$\times$ in the presence of this noise. We further validate these enhancements by measuring applied accelerations over a 200 $μg$ range up to 21$\times$ more precisely at the highest applied noise level. Our demonstration provides a pathway to improved atom-interferometric inertial sensing in real-world settings. △ Less

Submitted 30 November, 2023; v1 submitted 7 March, 2023; originally announced March 2023.

Comments: 15 pages, 7 figures

Journal ref: Nat Commun 14, 7626 (2023)

First measurement of the nuclear-recoil ionization yield in silicon at 100 eV

Authors: M. F. Albakry, I. Alkhatib, D. Alonso, D. W. P. Amaral, P. An, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, P. S. Barbeau, C. Bathurst, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott , et al. (115 additional authors not shown)

Abstract: We measured the nuclear--recoil ionization yield in silicon with a cryogenic phonon-sensitive gram-scale detector. Neutrons from a mono-energetic beam scatter off of the silicon nuclei at angles corresponding to energy depositions from 4\,keV down to 100\,eV, the lowest energy probed so far. The results show no sign of an ionization production threshold above 100\,eV. These results call for furthe… ▽ More We measured the nuclear--recoil ionization yield in silicon with a cryogenic phonon-sensitive gram-scale detector. Neutrons from a mono-energetic beam scatter off of the silicon nuclei at angles corresponding to energy depositions from 4\,keV down to 100\,eV, the lowest energy probed so far. The results show no sign of an ionization production threshold above 100\,eV. These results call for further investigation of the ionization yield theory and a comprehensive determination of the detector response function at energies below the keV scale. △ Less

Submitted 3 March, 2023; originally announced March 2023.

Journal ref: Physical Review Letters 131.9 (2023): 091801

Anisotropic molecular coarse-graining by force and torque matching with neural networks

Authors: Marltan O. Wilson, David M. Huang

Abstract: We develop a machine-learning method for coarse-graining condensed-phase molecular systems using anisotropic particles. The method extends currently available high-dimensional neural network potentials by addressing molecular anisotropy. We demonstrate the flexibility of the method by parametrizing single-site coarse-grained models of a rigid small molecule (benzene) and a semi-flexible organic se… ▽ More We develop a machine-learning method for coarse-graining condensed-phase molecular systems using anisotropic particles. The method extends currently available high-dimensional neural network potentials by addressing molecular anisotropy. We demonstrate the flexibility of the method by parametrizing single-site coarse-grained models of a rigid small molecule (benzene) and a semi-flexible organic semiconductor (sexithiophene), attaining structural accuracy close to the all-atom models for both molecules at considerably lower computational expense. The machine-learning method of constructing the coarse-grained potential is shown to be straightforward and sufficiently robust to capture anisotropic interactions and many-body effects. The method is validated through its ability to reproduce the structural properties of the small molecule's liquid phase and the phase transitions of the semi-flexible molecule over a wide temperature range. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Comments: 13 pages + 8 pages supplementary material, 13 figures

Journal ref: J. Chem. Phys. 159, 024110 (2023)

Dropouts of Fully Stripped Ions in the Solar Wind: A Diagnostic for Wave Heating versus Reconnection

Authors: John C. Raymond, M. Asgari-Targhi, Maurice L. Wilson, Yeimy J. Rivera, Susan T Lepri, Chengcai Shen

Abstract: The SWICS instrument aboard the ACE satellite has detected frequent intervals in the slow solar wind and interplanetary coronal mass ejections (ICMEs) in which C6+ and other fully stripped ions are strongly depleted, though the ionization states of elements such as Si and Fe indicate that those ions should be present. It has been suggested that these outlier or dropout events can be explained by t… ▽ More The SWICS instrument aboard the ACE satellite has detected frequent intervals in the slow solar wind and interplanetary coronal mass ejections (ICMEs) in which C6+ and other fully stripped ions are strongly depleted, though the ionization states of elements such as Si and Fe indicate that those ions should be present. It has been suggested that these outlier or dropout events can be explained by the resonant cyclotron heating process, because these ions all have the same cyclotron frequency as He2+. We investigate the region in the corona where these outlier events form. It must be above the ionization freeze-in height and the transition to collisionless plasma conditions, but low enough that the wind still feels the effects of solar gravity. We suggest that the dropout events correspond to relatively dense blobs of gas in which the heating is reduced because local variations in the Alfven speed change the reflection of Alfven waves and the turbulent cascade. As a result, the wave power at the cyclotron frequency of the fully stripped ions is absorbed by He2+ and may not be able to heat the other fully-stripped ions enough to overcome solar gravity. If this picture is borne out, it may help to discriminate between resonant cyclotron heating and stochastic heating models of the solar wind. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Exploring the configurational space of amorphous graphene with machine-learned atomic energies

Authors: Zakariya El-Machachi, Mark Wilson, Volker L. Deringer

Abstract: Two-dimensionally extended amorphous carbon ("amorphous graphene") is a prototype system for disorder in 2D, showing a rich and complex configurational space that is yet to be fully understood. Here we explore the nature of amorphous graphene with an atomistic machine-learning (ML) model. We create structural models by introducing defects into ordered graphene through Monte-Carlo bond switching, d… ▽ More Two-dimensionally extended amorphous carbon ("amorphous graphene") is a prototype system for disorder in 2D, showing a rich and complex configurational space that is yet to be fully understood. Here we explore the nature of amorphous graphene with an atomistic machine-learning (ML) model. We create structural models by introducing defects into ordered graphene through Monte-Carlo bond switching, defining acceptance criteria using the machine-learned local, atomic energies associated with a defect, as well as the nearest-neighbor (NN) environments. We find that physically meaningful structural models arise from ML atomic energies in this way, ranging from continuous random networks to paracrystalline structures. Our results show that ML atomic energies can be used to guide Monte-Carlo structural searches in principle, and that their predictions of local stability can be linked to short- and medium-range order in amorphous graphene. We expect that the former point will be relevant more generally to the study of amorphous materials, and that the latter has wider implications for the interpretation of ML potential models. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Journal ref: Chem. Sci. 13, 13720 (2022)

Investigating the sources of low-energy events in a SuperCDMS-HVeV detector

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott, J. Cooley , et al. (104 additional authors not shown)

Abstract: Recent experiments searching for sub-GeV/$c^2$ dark matter have observed event excesses close to their respective energy thresholds. Although specific to the individual technologies, the measured excess event rates have been consistently reported at or below event energies of a few-hundred eV, or with charges of a few electron-hole pairs. In the present work, we operated a 1-gram silicon SuperCDMS… ▽ More Recent experiments searching for sub-GeV/$c^2$ dark matter have observed event excesses close to their respective energy thresholds. Although specific to the individual technologies, the measured excess event rates have been consistently reported at or below event energies of a few-hundred eV, or with charges of a few electron-hole pairs. In the present work, we operated a 1-gram silicon SuperCDMS-HVeV detector at three voltages across the crystal (0 V, 60 V and 100 V). The 0 V data show an excess of events in the tens of eV region. Despite this event excess, we demonstrate the ability to set a competitive exclusion limit on the spin-independent dark matter--nucleon elastic scattering cross section for dark matter masses of $\mathcal{O}(100)$ MeV/$c^2$, enabled by operation of the detector at 0 V potential and achievement of a very low $\mathcal{O}(10)$ eV threshold for nuclear recoils. Comparing the data acquired at 0 V, 60 V and 100 V potentials across the crystal, we investigated possible sources of the unexpected events observed at low energy. The data indicate that the dominant contribution to the excess is consistent with a hypothesized luminescence from the printed circuit boards used in the detector holder. △ Less

Submitted 11 October, 2022; v1 submitted 17 April, 2022; originally announced April 2022.

A Strategy for Low-Mass Dark Matter Searches with Cryogenic Detectors in the SuperCDMS SNOLAB Facility

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeno, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott, J. Cooley , et al. (103 additional authors not shown)

Abstract: The SuperCDMS Collaboration is currently building SuperCDMS SNOLAB, a dark matter search focused on nucleon-coupled dark matter in the 1-5 GeV/c$^2$ mass range. Looking to the future, the Collaboration has developed a set of experience-based upgrade scenarios, as well as novel directions, to extend the search for dark matter using the SuperCDMS technology in the SNOLAB facility. The experienced-ba… ▽ More The SuperCDMS Collaboration is currently building SuperCDMS SNOLAB, a dark matter search focused on nucleon-coupled dark matter in the 1-5 GeV/c$^2$ mass range. Looking to the future, the Collaboration has developed a set of experience-based upgrade scenarios, as well as novel directions, to extend the search for dark matter using the SuperCDMS technology in the SNOLAB facility. The experienced-based scenarios are forecasted to probe many square decades of unexplored dark matter parameter space below 5 GeV/c$^2$, covering over 6 decades in mass: 1-100 eV/c$^2$ for dark photons and axion-like particles, 1-100 MeV/c$^2$ for dark-photon-coupled light dark matter, and 0.05-5 GeV/c$^2$ for nucleon-coupled dark matter. They will reach the neutrino fog in the 0.5-5 GeV/c$^2$ mass range and test a variety of benchmark models and sharp targets. The novel directions involve greater departures from current SuperCDMS technology but promise even greater reach in the long run, and their development must begin now for them to be available in a timely fashion. The experienced-based upgrade scenarios rely mainly on dramatic improvements in detector performance based on demonstrated scaling laws and reasonable extrapolations of current performance. Importantly, these improvements in detector performance obviate significant reductions in background levels beyond current expectations for the SuperCDMS SNOLAB experiment. Given that the dominant limiting backgrounds for SuperCDMS SNOLAB are cosmogenically created radioisotopes in the detectors, likely amenable only to isotopic purification and an underground detector life-cycle from before crystal growth to detector testing, the potential cost and time savings are enormous and the necessary improvements much easier to prototype. △ Less

Submitted 1 April, 2023; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021; v2 updated (assorted corrections and improvements to forecasts) October 2022; v3 updated (corrected SuperCDMS SNOLAB sensitivity curves in upgrade forecast plots in body of text) April 2023

A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics

Authors: J. Aalbers, K. Abe, V. Aerne, F. Agostini, S. Ahmed Maouloud, D. S. Akerib, D. Yu. Akimov, J. Akshat, A. K. Al Musalhi, F. Alder, S. K. Alsum, L. Althueser, C. S. Amarasinghe, F. D. Amaro, A. Ames, T. J. Anderson, B. Andrieu, N. Angelides, E. Angelino, J. Angevaare, V. C. Antochi, D. Antón Martin, B. Antunovic, E. Aprile, H. M. Araújo , et al. (572 additional authors not shown)

Abstract: The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut… ▽ More The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Comments: 77 pages, 40 figures, 1262 references

Report number: INT-PUB-22-003

Journal ref: J. Phys. G: Nucl. Part. Phys. 50 (2023) 013001

Ionization yield measurement in a germanium CDMSlite detector using photo-neutron sources

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (104 additional authors not shown)

Abstract: Two photo-neutron sources, $^{88}$Y$^{9}$Be and $^{124}$Sb$^{9}$Be, have been used to investigate the ionization yield of nuclear recoils in the CDMSlite germanium detectors by the SuperCDMS collaboration. This work evaluates the yield for nuclear recoil energies between 1 keV and 7 keV at a temperature of $\sim$ 50 mK. We use a Geant4 simulation to model the neutron spectrum assuming a charge yie… ▽ More Two photo-neutron sources, $^{88}$Y$^{9}$Be and $^{124}$Sb$^{9}$Be, have been used to investigate the ionization yield of nuclear recoils in the CDMSlite germanium detectors by the SuperCDMS collaboration. This work evaluates the yield for nuclear recoil energies between 1 keV and 7 keV at a temperature of $\sim$ 50 mK. We use a Geant4 simulation to model the neutron spectrum assuming a charge yield model that is a generalization of the standard Lindhard model and consists of two energy dependent parameters. We perform a likelihood analysis using the simulated neutron spectrum, modeled background, and experimental data to obtain the best fit values of the yield model. The ionization yield between recoil energies of 1 keV and 7 keV is shown to be significantly lower than predicted by the standard Lindhard model for germanium. There is a general lack of agreement among different experiments using a variety of techniques studying the low-energy range of the nuclear recoil yield, which is most critical for interpretation of direct dark matter searches. This suggests complexity in the physical process that many direct detection experiments use to model their primary signal detection mechanism and highlights the need for further studies to clarify underlying systematic effects that have not been well understood up to this point. △ Less

Submitted 27 June, 2022; v1 submitted 14 February, 2022; originally announced February 2022.

Journal ref: Phys. Rev. D 105, 122002 (2022)

EXCESS workshop: Descriptions of rising low-energy spectra

Authors: P. Adari, A. Aguilar-Arevalo, D. Amidei, G. Angloher, E. Armengaud, C. Augier, L. Balogh, S. Banik, D. Baxter, C. Beaufort, G. Beaulieu, V. Belov, Y. Ben Gal, G. Benato, A. Benoît, A. Bento, L. Bergé, A. Bertolini, R. Bhattacharyya, J. Billard, I. M. Bloch, A. Botti, R. Breier, G. Bres, J-. L. Bret , et al. (281 additional authors not shown)

Abstract: Many low-threshold experiments observe sharply rising event rates of yet unknown origins below a few hundred eV, and larger than expected from known backgrounds. Due to the significant impact of this excess on the dark matter or neutrino sensitivity of these experiments, a collective effort has been started to share the knowledge about the individual observations. For this, the EXCESS Workshop was… ▽ More Many low-threshold experiments observe sharply rising event rates of yet unknown origins below a few hundred eV, and larger than expected from known backgrounds. Due to the significant impact of this excess on the dark matter or neutrino sensitivity of these experiments, a collective effort has been started to share the knowledge about the individual observations. For this, the EXCESS Workshop was initiated. In its first iteration in June 2021, ten rare event search collaborations contributed to this initiative via talks and discussions. The contributing collaborations were CONNIE, CRESST, DAMIC, EDELWEISS, MINER, NEWS-G, NUCLEUS, RICOCHET, SENSEI and SuperCDMS. They presented data about their observed energy spectra and known backgrounds together with details about the respective measurements. In this paper, we summarize the presented information and give a comprehensive overview of the similarities and differences between the distinct measurements. The provided data is furthermore publicly available on the workshop's data repository together with a plotting tool for visualization. △ Less

Submitted 4 March, 2022; v1 submitted 10 February, 2022; originally announced February 2022.

Comments: 44 pages, 20 figures; Editors: A. Fuss, M. Kaznacheeva, F. Reindl, F. Wagner; updated copyright statements and funding information

Journal ref: SciPost Phys. Proc. 9, 001 (2022)

Wave function Ansatz (but Periodic) Networks and the Homogeneous Electron Gas

Authors: Max Wilson, Saverio Moroni, Markus Holzmann, Nicholas Gao, Filip Wudarski, Tejs Vegge, Arghya Bhowmik

Abstract: We design a neural network Ansatz for variationally finding the ground-state wave function of the Homogeneous Electron Gas, a fundamental model in the physics of extended systems of interacting fermions. We study the spin-polarised and paramagnetic phases with 7, 14 and 19 electrons over a broad range of densities from $r_s=1$ to $r_s=100$, obtaining similar or higher accuracy compared to a state-… ▽ More We design a neural network Ansatz for variationally finding the ground-state wave function of the Homogeneous Electron Gas, a fundamental model in the physics of extended systems of interacting fermions. We study the spin-polarised and paramagnetic phases with 7, 14 and 19 electrons over a broad range of densities from $r_s=1$ to $r_s=100$, obtaining similar or higher accuracy compared to a state-of-the-art iterative backflow baseline even in the challenging regime of very strong correlation. Our work extends previous applications of neural network Ansätze to molecular systems with methods for handling periodic boundary conditions, and makes two notable changes to improve performance: splitting the pairwise streams by spin alignment and generating backflow coordinates for the orbitals from the network. We illustrate the advantage of our high quality wave functions in computing the reduced single particle density matrix. This contribution establishes neural network models as flexible and high precision Ansätze for periodic electronic systems, an important step towards applications to crystalline solids. △ Less

Submitted 23 May, 2023; v1 submitted 2 February, 2022; originally announced February 2022.

Journal ref: Phys. Rev. B 107, 235139 (2023)

In situ detection of RF breakdown on microfabricated surface ion traps

Authors: Joshua M. Wilson, Julia N. Tilles, Raymond A. Haltli, Eric Ou, Matthew G. Blain, Susan M. Clark, Melissa C. Revelle

Abstract: Microfabricated surface ion traps are a principle component of many ion-based quantum information science platforms. The operational parameters of these devices are pushed to the edge of their physical capabilities as the experiments strive for increasing performance. When the applied radio-frequency (RF) voltage is increased too much, the devices can experience damaging electric discharge events… ▽ More Microfabricated surface ion traps are a principle component of many ion-based quantum information science platforms. The operational parameters of these devices are pushed to the edge of their physical capabilities as the experiments strive for increasing performance. When the applied radio-frequency (RF) voltage is increased too much, the devices can experience damaging electric discharge events known as RF breakdown. We introduce two novel techniques for in situ detection of RF breakdown, which we implemented while characterizing the breakdown threshold of surface ion traps produced at Sandia National Laboratories. In these traps, breakdown did not always occur immediately after increasing the RF voltage, but often minutes or even hours later. This result is surprising in the context of the suggested mechanisms for RF breakdown in vacuum. Additionally, the extent of visible damage caused by breakdown events increased with applied voltage. To minimize the probability for damage when RF power is first applied to a device, our results strongly suggest that the voltage should be ramped up over the course of several hours and monitored forbreakdown. △ Less

Submitted 17 December, 2021; originally announced December 2021.

Charge capacity characteristics of a Lithium Nickel-Cobalt-Aluminium Oxide battery show fractional-derivative behavior

Authors: Marcus T. Wilson, Vance Farrow, Caleb Pyne, Jonathan Scott

Abstract: Batteries experience capacity offset where available charge depends on the rate at which this charge is drawn. In this work we analyze the capacity offset of a 4.8 A h lithium nickel-cobalt-aluminium oxide battery using an equivalent circuit model of a fractional capacitor in series with a resistor. In this case, the available charge, in theory, becomes infinite in the limit of infinitesimal rate.… ▽ More Batteries experience capacity offset where available charge depends on the rate at which this charge is drawn. In this work we analyze the capacity offset of a 4.8 A h lithium nickel-cobalt-aluminium oxide battery using an equivalent circuit model of a fractional capacitor in series with a resistor. In this case, the available charge, in theory, becomes infinite in the limit of infinitesimal rate. We show that the fractional properties of the capacitor can be extracted from the charge against rate plot. We then use a network of RC elements to represent the fractional capacitor in order to simulate the data with Matlab. We find that the fractional exponent alpha obtained in this way, 0.971, agrees with that obtained in a more traditional manner from an impedance versus frequency plot, although the fractional capacity does not. Such an approach demonstrates the importance of a fractional description for capacity offset even when an element is nearly a pure capacitor and is valuable for predictions of state-of-charge when low currents are drawn. △ Less

Submitted 7 October, 2021; originally announced October 2021.

Comments: 15 pages, 5 figures

Mean exit time in irregularly-shaped annular and composite disc domains

Authors: Elliot J. Carr, Daniel J. VandenHeuvel, Joshua M. Wilson, Matthew J. Simpson

Abstract: Calculating the mean exit time (MET) for models of diffusion is a classical problem in statistical physics, with various applications in biophysics, economics and heat and mass transfer. While many exact results for MET are known for diffusion in simple geometries involving homogeneous materials, calculating MET for diffusion in realistic geometries involving heterogeneous materials is typically l… ▽ More Calculating the mean exit time (MET) for models of diffusion is a classical problem in statistical physics, with various applications in biophysics, economics and heat and mass transfer. While many exact results for MET are known for diffusion in simple geometries involving homogeneous materials, calculating MET for diffusion in realistic geometries involving heterogeneous materials is typically limited to repeated stochastic simulations or numerical solutions of the associated boundary value problem (BVP). In this work we derive exact solutions for the MET in irregular annular domains, including some applications where diffusion occurs in heterogenous media. These solutions are obtained by taking the exact results for MET in an annulus, and then constructing various perturbation solutions to account for the irregular geometries involved. These solutions, with a range of boundary conditions, are implemented symbolically and compare very well with averaged data from repeated stochastic simulations and with numerical solutions of the associated BVP. Software to implement the exact solutions is available at https://github.com/ProfMJSimpson/Exit_time. △ Less

Submitted 2 March, 2022; v1 submitted 9 August, 2021; originally announced August 2021.

Comments: 18 pages, 6 figures, accepted version

Journal ref: Journal of Physics A: Mathematical and Theoretical, 55 (2022) 105002

Simulations of state-of-the-art fermionic neural network wave functions with diffusion Monte Carlo

Authors: Max Wilson, Nicholas Gao, Filip Wudarski, Eleanor Rieffel, Norm M. Tubman

Abstract: Recently developed neural network-based \emph{ab-initio} solutions (Pfau et. al arxiv:1909.02487v2) for finding ground states of fermionic systems can generate state-of-the-art results on a broad class of systems. In this work, we improve the results for this Ansatz with Diffusion Monte Carlo. Additionally, we introduce several modifications to the network (Fermi Net) and optimization method (Kron… ▽ More Recently developed neural network-based \emph{ab-initio} solutions (Pfau et. al arxiv:1909.02487v2) for finding ground states of fermionic systems can generate state-of-the-art results on a broad class of systems. In this work, we improve the results for this Ansatz with Diffusion Monte Carlo. Additionally, we introduce several modifications to the network (Fermi Net) and optimization method (Kronecker Factored Approximate Curvature) that reduce the number of required resources while maintaining or improving the modelling performance. In terms of the model, we remove redundant computations and alter the way data is handled in the permutation equivariant function. The Diffusion Monte Carlo results exceed or match state-of-the-art performance for all systems investigated: atomic systems Be-Ne, and the carbon cation C$^+$. △ Less

Submitted 24 March, 2021; v1 submitted 23 March, 2021; originally announced March 2021.

Direct quantification of quasi-Fermi level splitting in organic semiconductor devices

Authors: Drew B. Riley, Oskar J. Sandberg, Nora M. Wilson, Wei Li, Stefan Zeiske, Nasim Zarrabi, Paul Meredith, Ronald Osterbacka, Ardalan Armin

Abstract: Non-radiative losses to the open-circuit voltage are a primary factor in limiting the power conversion efficiency of organic photovoltaic devices. The dominant non-radiative loss is intrinsic to the active layer and can be determined from the quasi-Fermi level splitting (QFLS) and the radiative thermodynamic limit of the photovoltage. Quantification of the QFLS in thin film devices with low mobili… ▽ More Non-radiative losses to the open-circuit voltage are a primary factor in limiting the power conversion efficiency of organic photovoltaic devices. The dominant non-radiative loss is intrinsic to the active layer and can be determined from the quasi-Fermi level splitting (QFLS) and the radiative thermodynamic limit of the photovoltage. Quantification of the QFLS in thin film devices with low mobility is challenging due to the excitonic nature of photoexcitation and additional sources of nonradiative loss associated with the device structure. This work outlines an experimental approach based on electro-modulated photoluminescence, which can be used to directly measure the intrinsic non-radiative loss to the open-circuit voltage; thereby, quantifying the QFLS. Drift-diffusion simulations are carried out to show that this method accurately predicts the QFLS in the bulk of the device regardless of device-related non-radiative losses. State-of-the-art PM6:Y6-based organic solar cells are used as a model to test the experimental approach, and the QFLS is quantified and shown to be independent of device architecture. This work provides a method to quantify the QFLS of organic solar cells under operational conditions, fully characterizing the different contributions to the non-radiative losses of the open-circuit voltage. The reported method will be useful in not only characterizing and understanding losses in organic solar cells, but also other device platforms such as light-emitting diodes and photodetectors. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Applied 15, 064035 (2021)

On the periodicity of cardiovascular fluid dynamics simulations

Authors: Martin R. Pfaller, Jonathan Pham, Nathan M. Wilson, David W. Parker, Alison L. Marsden

Abstract: Three-dimensional cardiovascular fluid dynamics simulations typically require computation of several cardiac cycles before they reach a periodic solution, rendering them computationally expensive. Furthermore, there is currently no standardized method to determine whether a simulation has yet reached that periodic state. In this work, we propose use of the asymptotic error measure to quantify the… ▽ More Three-dimensional cardiovascular fluid dynamics simulations typically require computation of several cardiac cycles before they reach a periodic solution, rendering them computationally expensive. Furthermore, there is currently no standardized method to determine whether a simulation has yet reached that periodic state. In this work, we propose use of the asymptotic error measure to quantify the difference between simulation results and their ideal periodic state using lumped-parameter modeling. We further show that initial conditions are crucial in reducing computational time and develop an automated framework to generate appropriate initial conditions from a one-dimensional model of blood flow. We demonstrate the performance of our initialization method using six patient-specific models from the Vascular Model Repository. In our examples, our initialization protocol achieves periodic convergence within one or two cardiac cycles, leading to a significant reduction in computational cost compared to standard methods. All computational tools used in this work are implemented in the open-source software platform SimVascular. Automatically generated initial conditions have the potential to significantly reduce computation time in cardiovascular fluid dynamics simulations. △ Less

Submitted 29 January, 2021; originally announced February 2021.

Mean exit time for diffusion on irregular domains

Authors: Matthew J Simpson, Daniel J Vandenheuvel, Joshua M Wilson, Scott W McCue, Elliot J Carr

Abstract: Many problems in physics, biology, and economics depend upon the duration of time required for a diffusing particle to cross a boundary. As such, calculations of the distribution of first passage time, and in particular the mean first passage time, is an active area of research relevant to many disciplines. Exact results for the mean first passage time for diffusion on simple geometries, such as l… ▽ More Many problems in physics, biology, and economics depend upon the duration of time required for a diffusing particle to cross a boundary. As such, calculations of the distribution of first passage time, and in particular the mean first passage time, is an active area of research relevant to many disciplines. Exact results for the mean first passage time for diffusion on simple geometries, such as lines, discs and spheres, are well--known. In contrast, computational methods are often used to study the first passage time for diffusion on more realistic geometries where closed--form solutions of the governing elliptic boundary value problem are not available. Here, we develop a perturbation solution to calculate the mean first passage time on irregular domains formed by perturbing the boundary of a disc or an ellipse. Classical perturbation expansion solutions are then constructed using the exact solutions available on a disc and an ellipse. We apply the perturbation solutions to compute the mean first exit time on two naturally--occurring irregular domains: a map of Tasmania, an island state of Australia, and a map of Taiwan. Comparing the perturbation solutions with numerical solutions of the elliptic boundary value problem on these irregular domains confirms that we obtain a very accurate solution with a few terms in the series only. Matlab software to implement all calculations is available on GitHub. △ Less

Submitted 5 February, 2021; v1 submitted 8 January, 2021; originally announced January 2021.

Comments: 31pages, 12 figures

MSC Class: 92Bxx; 92-08

Design and Characterization of a Phonon-Mediated Cryogenic Particle Detector with an eV-Scale Threshold and 100 keV-Scale Dynamic Range

Authors: R. Ren, C. Bathurst, Y. Y. Chang, R. Chen, C. W. Fink, Z. Hong, N. A. Kurinsky, N. Mast, N. Mishra, V. Novati, G. Spahn, H. Meyer zu Theenhausen, S. L. Watkins, Z. Williams, M. J. Wilson, A. Zaytsev, D. Bauer, R. Bunker, E. Figueroa-Feliciano, M. Hollister, L. Hsu, P. Lukens, R. Mahapatra, N. Mirabolfathi, B. Nebolsky , et al. (5 additional authors not shown)

Abstract: We present the design and characterization of a cryogenic phonon-sensitive 1-gram Si detector exploiting the Neganov-Trofimov-Luke effect to detect single-charge excitations. This device achieved 2.65(2)~eV phonon energy resolution when operated without a voltage bias across the crystal and a corresponding charge resolution of 0.03 electron-hole pairs at 100~V bias. With a continuous-readout data… ▽ More We present the design and characterization of a cryogenic phonon-sensitive 1-gram Si detector exploiting the Neganov-Trofimov-Luke effect to detect single-charge excitations. This device achieved 2.65(2)~eV phonon energy resolution when operated without a voltage bias across the crystal and a corresponding charge resolution of 0.03 electron-hole pairs at 100~V bias. With a continuous-readout data acquisition system and an offline optimum-filter trigger, we obtain a 9.2~eV threshold with a trigger rate of the order of 20~Hz. The detector's energy scale is calibrated up to 120~keV using an energy estimator based on the pulse area. The high performance of this device allows its application to different fields where excellent energy resolution, low threshold, and large dynamic range are required, including dark matter searches, precision measurements of coherent neutrino-nucleus scattering, and ionization yield measurements. △ Less

Submitted 20 May, 2021; v1 submitted 22 December, 2020; originally announced December 2020.

Comments: 17 pages, 12 figures, submitted to PRD

Report number: FERMILAB-PUB-20-674-AD-E

Journal ref: Phys. Rev. D 104, 032010 (2021)

Global daily 1km land surface precipitation based on cloud cover-informed downscaling

Authors: Dirk Nikolaus Karger, Adam M. Wilson, Colin Mahony, Niklaus E. Zimmermann, Walter Jetz

Abstract: High-resolution climatic data are essential to many applications in environmental research. Here we develop a new semi-mechanistic downscaling approach for daily precipitation that incorporates high resolution (30 arc sec) satellite-derived cloud frequency. The downscaling algorithm incorporates orographic predictors such as wind fields, valley exposition, and boundary layer height, with a subsequ… ▽ More High-resolution climatic data are essential to many applications in environmental research. Here we develop a new semi-mechanistic downscaling approach for daily precipitation that incorporates high resolution (30 arc sec) satellite-derived cloud frequency. The downscaling algorithm incorporates orographic predictors such as wind fields, valley exposition, and boundary layer height, with a subsequent bias correction. We apply the method to the ERA5 precipitation archive and MODIS monthly cloud cover frequency to develop a daily gridded precipitation time series in 1km resolution for the years 2003 onward. Comparison of the predictions with existing gridded products and station data indicates an improvement in the spatio-temporal performance of the downscaled data in predicting precipitation. Regional scrutiny of the cloud cover correction from a topographically highly heterogeneous area further confirms that CHELSA-EarthEnv performs well in comparison to other precipitation products such as numerical weather models. The presented CHELSA-EarthEnv daily precipitation product improves the temporal accuracy compared to ERA5 with an additional improved in spatial accuracy and much better representation of precipitation in complex terrain △ Less

Submitted 12 October, 2021; v1 submitted 18 December, 2020; originally announced December 2020.

Comments: 31 pages, 8 figures

Constraints on Lightly Ionizing Particles from CDMSlite

Authors: SuperCDMS Collaboration, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (93 additional authors not shown)

Abstract: The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) achieved efficient detection of very small recoil energies in its germanium target, resulting in sensitivity to Lightly Ionizing Particles (LIPs) in a previously unexplored region of charge, mass, and velocity parameter space. We report first direct-detection limits calculated using the optimum interval method on the v… ▽ More The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) achieved efficient detection of very small recoil energies in its germanium target, resulting in sensitivity to Lightly Ionizing Particles (LIPs) in a previously unexplored region of charge, mass, and velocity parameter space. We report first direct-detection limits calculated using the optimum interval method on the vertical intensity of cosmogenically-produced LIPs with an electric charge smaller than $e/(3\times10^5$), as well as the strongest limits for charge $\leq e/160$, with a minimum vertical intensity of $1.36\times10^{-7}$\,cm$^{-2}$s$^{-1}$sr$^{-1}$ at charge $e/160$. These results apply over a wide range of LIP masses (5\,MeV/$c^2$ to 100\,TeV/$c^2$) and cover a wide range of $βγ$ values (0.1 -- $10^6$), thus excluding non-relativistic LIPs with $βγ$ as small as 0.1 for the first time. △ Less

Submitted 19 February, 2022; v1 submitted 18 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Lett. 127, 081802 (2021)

Photoelectric absorption cross section of silicon near the band gap from room temperature to sub-Kelvin temperature

Authors: C. Stanford, M. J. Wilson, B. Cabrera, M. Diamond, N. A. Kurinsky, R. A. Moffatt, F. Ponce, B. von Krosigk, B. A. Young

Abstract: The use of cryogenic silicon as a detector medium for dark matter searches is gaining popularity. Many of these searches are highly dependent on the value of the photoelectric absorption cross section of silicon at low temperatures, particularly near the silicon band gap energy, where the searches are most sensitive to low mass dark matter candidates. While such cross section data has been lacking… ▽ More The use of cryogenic silicon as a detector medium for dark matter searches is gaining popularity. Many of these searches are highly dependent on the value of the photoelectric absorption cross section of silicon at low temperatures, particularly near the silicon band gap energy, where the searches are most sensitive to low mass dark matter candidates. While such cross section data has been lacking from the literature, previous dark matter search experiments have attempted to estimate this parameter by extrapolating it from higher temperature data. However, discrepancies in the high temperature data have led to order-of-magnitude differences in the extrapolations. In this paper, we resolve these discrepancies by using a novel technique to make a direct, low temperature measurement of the photoelectric absorption cross section of silicon at energies near the band gap. △ Less

Submitted 29 October, 2020; originally announced October 2020.

Identifying Entangled Physics Relationships through Sparse Matrix Decomposition to Inform Plasma Fusion Design

Authors: M. Giselle Fernández-Godino, Michael J. Grosskopf, Julia B. Nakhleh, Brandon M. Wilson, John Kline, Gowri Srinivasan

Abstract: A sustainable burn platform through inertial confinement fusion (ICF) has been an ongoing challenge for over 50 years. Mitigating engineering limitations and improving the current design involves an understanding of the complex coupling of physical processes. While sophisticated simulations codes are used to model ICF implosions, these tools contain necessary numerical approximation but miss physi… ▽ More A sustainable burn platform through inertial confinement fusion (ICF) has been an ongoing challenge for over 50 years. Mitigating engineering limitations and improving the current design involves an understanding of the complex coupling of physical processes. While sophisticated simulations codes are used to model ICF implosions, these tools contain necessary numerical approximation but miss physical processes that limit predictive capability. Identification of relationships between controllable design inputs to ICF experiments and measurable outcomes (e.g. yield, shape) from performed experiments can help guide the future design of experiments and development of simulation codes, to potentially improve the accuracy of the computational models used to simulate ICF experiments. We use sparse matrix decomposition methods to identify clusters of a few related design variables. Sparse principal component analysis (SPCA) identifies grou**s that are related to the physical origin of the variables (laser, hohlraum, and capsule). A variable importance analysis finds that in addition to variables highly correlated with neutron yield such as picket power and laser energy, variables that represent a dramatic change of the ICF design such as number of pulse steps are also very important. The obtained sparse components are then used to train a random forest (RF) surrogate for predicting total yield. The RF performance on the training and testing data compares with the performance of the RF surrogate trained using all design variables considered. This work is intended to inform design changes in future ICF experiments by augmenting the expert intuition and simulations results. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 8 pages, 7 figures

Report number: LA-UR-20-28715

Exploring Sensitivity of ICF Outputs to Design Parameters in Experiments Using Machine Learning

Authors: Julia B. Nakhleh, M. Giselle Fernández-Godino, Michael J. Grosskopf, Brandon M. Wilson, John Kline, Gowri Srinivasan

Abstract: Building a sustainable burn platform in inertial confinement fusion (ICF) requires an understanding of the complex coupling of physical processes and the effects that key experimental design changes have on implosion performance. While simulation codes are used to model ICF implosions, incomplete physics and the need for approximations deteriorate their predictive capability. Identification of rel… ▽ More Building a sustainable burn platform in inertial confinement fusion (ICF) requires an understanding of the complex coupling of physical processes and the effects that key experimental design changes have on implosion performance. While simulation codes are used to model ICF implosions, incomplete physics and the need for approximations deteriorate their predictive capability. Identification of relationships between controllable design inputs and measurable outcomes can help guide the future design of experiments and development of simulation codes, which can potentially improve the accuracy of the computational models used to simulate ICF implosions. In this paper, we leverage developments in machine learning (ML) and methods for ML feature importance/sensitivity analysis to identify complex relationships in ways that are difficult to process using expert judgment alone. We present work using random forest (RF) regression for prediction of yield, velocity, and other experimental outcomes given a suite of design parameters, along with an assessment of important relationships and uncertainties in the prediction model. We show that RF models are capable of learning and predicting on ICF experimental data with high accuracy, and we extract feature importance metrics that provide insight into the physical significance of different controllable design inputs for various ICF design configurations. These results can be used to augment expert intuition and simulation results for optimal design of future ICF experiments. △ Less

Submitted 1 September, 2021; v1 submitted 8 October, 2020; originally announced October 2020.

Comments: 10 pages, 9 figures. Published in IEEE Transactions on Plasma Science, July 2021 (see Journal Reference info)

Report number: LA-UR-20-27991

Journal ref: IEEE Transactions on Plasma Science, vol. 49, no. 7, pp. 2238-2246, July 2021

Light Dark Matter Search with a High-Resolution Athermal Phonon Detector Operated Above Ground

Authors: I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (99 additional authors not shown)

Abstract: We present limits on spin-independent dark matter-nucleon interactions using a $10.6$ $\mathrm{g}$ Si athermal phonon detector with a baseline energy resolution of $σ_E=3.86 \pm 0.04$ $(\mathrm{stat.})^{+0.19}_{-0.00}$ $(\mathrm{syst.})$ $\mathrm{eV}$. This exclusion analysis sets the most stringent dark matter-nucleon scattering cross-section limits achieved by a cryogenic detector for dark matte… ▽ More We present limits on spin-independent dark matter-nucleon interactions using a $10.6$ $\mathrm{g}$ Si athermal phonon detector with a baseline energy resolution of $σ_E=3.86 \pm 0.04$ $(\mathrm{stat.})^{+0.19}_{-0.00}$ $(\mathrm{syst.})$ $\mathrm{eV}$. This exclusion analysis sets the most stringent dark matter-nucleon scattering cross-section limits achieved by a cryogenic detector for dark matter particle masses from $93$ to $140$ $\mathrm{MeV}/c^2$, with a raw exposure of $9.9$ $\mathrm{g}\cdot\mathrm{d}$ acquired at an above-ground facility. This work illustrates the scientific potential of detectors with athermal phonon sensors with eV-scale energy resolution for future dark matter searches. △ Less

Submitted 12 October, 2021; v1 submitted 21 July, 2020; originally announced July 2020.

Comments: 7 pages, 4 figures, this version includes ancillary files from official data release

Journal ref: Phys. Rev. Lett. 127, 061801 (2021)

Morphologies and dynamics of micro-droplet impact onto an idealised scratch

Authors: Khaled H. A. Al-Ghaithi, Oliver G. Harlen, Nikil Kapur, Mark C. T. Wilson

Abstract: As inkjet technology develops to produce smaller droplets, substrate features such as accidental scratches or manufacturing defects can potentially affect the outcome of printing, particularly for printed electronics where continuous tracks are required. Here, the deposition of micro-droplets onto a scratch of commensurate size is studied. The scratch is considered as a groove of rectangular cross… ▽ More As inkjet technology develops to produce smaller droplets, substrate features such as accidental scratches or manufacturing defects can potentially affect the outcome of printing, particularly for printed electronics where continuous tracks are required. Here, the deposition of micro-droplets onto a scratch of commensurate size is studied. The scratch is considered as a groove of rectangular cross-section, with rectangular side ridges representing material displaced from the substrate, and seven equilibrium morphologies are identified as a result of inertial spreading, contact-line pinning, imbibition into the scratch and capillary flow. A regime map is constructed in terms of scratch depth and width, and theoretical estimates of the regime boundaries are developed by adapting droplet spreading laws for flat surfaces to account for liquid entering the scratches. Good agreement is seen with numerical results obtained using a GPU-accelerated three-dimensional multiphase lattice Boltzmann model validated against published experiments, and the influences of Reynolds number, Weber number and advancing and receding contact angles are explored. Negative and positive implications of the results for printing applications are discussed and illustrated via multiple-droplet simulations of printing across and along scratches. △ Less

Submitted 14 September, 2021; v1 submitted 3 July, 2020; originally announced July 2020.

Journal ref: Journal of Fluid Mechanics, 2021, 925, A23

Constraints on low-mass, relic dark matter candidates from a surface-operated SuperCDMS single-charge sensitive detector

Authors: SuperCDMS Collaboration, D. W. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, R. Chen, N. Chott, J. Cooley , et al. (94 additional authors not shown)

Abstract: This article presents an analysis and the resulting limits on light dark matter inelastically scattering off of electrons, and on dark photon and axion-like particle absorption, using a second-generation SuperCDMS high-voltage eV-resolution detector. The 0.93 gram Si detector achieved a 3 eV phonon energy resolution; for a detector bias of 100 V, this corresponds to a charge resolution of 3% of a… ▽ More This article presents an analysis and the resulting limits on light dark matter inelastically scattering off of electrons, and on dark photon and axion-like particle absorption, using a second-generation SuperCDMS high-voltage eV-resolution detector. The 0.93 gram Si detector achieved a 3 eV phonon energy resolution; for a detector bias of 100 V, this corresponds to a charge resolution of 3% of a single electron-hole pair. The energy spectrum is reported from a blind analysis with 1.2 gram-days of exposure acquired in an above-ground laboratory. With charge carrier trap** and impact ionization effects incorporated into the dark matter signal models, the dark matter-electron cross section $\barσ_{e}$ is constrained for dark matter masses from 0.5--$10^{4} $MeV$/c^{2}$; in the mass range from 1.2--50 eV$/c^{2}$ the dark photon kinetic mixing parameter $\varepsilon$ and the axioelectric coupling constant $g_{ae}$ are constrained. The minimum 90% confidence-level upper limits within the above mentioned mass ranges are $\barσ_{e}\,=\,8.7\times10^{-34}$ cm$^{2}$, $\varepsilon\,=\,3.3\times10^{-14}$, and $g_{ae}\,=\,1.0\times10^{-9}$. △ Less

Submitted 29 January, 2021; v1 submitted 28 May, 2020; originally announced May 2020.

Comments: 5 pages + title and references, 3 figures and 1 table

Journal ref: Phys. Rev. D 102, 091101 (2020)

Surface jets and internal mixing during the coalescence of impacting and sessile droplets

Authors: Thomas C. Sykes, Alfonso A. Castrejón-Pita, J. Rafael Castrejón-Pita, David Harbottle, Zinedine Khatir, Harvey M. Thompson, Mark C. T. Wilson

Abstract: The internal dynamics during the coalescence of a sessile droplet and a subsequently deposited impacting droplet, with either identical or distinct surface tension, is studied experimentally in the regime where surface tension is dominant. Two color high-speed cameras are used to capture the rapid internal flows and associated mixing from both side and bottom views simultaneously by adding an iner… ▽ More The internal dynamics during the coalescence of a sessile droplet and a subsequently deposited impacting droplet, with either identical or distinct surface tension, is studied experimentally in the regime where surface tension is dominant. Two color high-speed cameras are used to capture the rapid internal flows and associated mixing from both side and bottom views simultaneously by adding an inert dye to the impacting droplet. Given sufficient lateral separation between droplets of identical surface tension, a robust surface jet is identified on top of the coalesced droplet. Image processing shows this jet is the result of a surface flow caused by the impact inertia and an immobile contact line. By introducing surface tension differences between the coalescing droplets, the surface jet can be either enhanced or suppressed via a Marangoni flow. The influence of the initial droplet configuration and relative surface tension on the long-term dynamics and mixing efficiency, plus the implications for emerging applications such as reactive inkjet printing, are also considered. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Comments: 18 pages, 9 figures

Journal ref: Phys. Rev. Fluids 5, 023602 (2020)

Constraints on dark photons and axion-like particles from SuperCDMS Soudan

Authors: SuperCDMS Collaboration, T. Aralis, T. Aramaki, I. J. Arnquist, E. Azadbakht, W. Baker, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S Bezerra, R. Bhattacharyya, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, J. Cooley, H. Coombes, J. Corbett , et al. (82 additional authors not shown)

Abstract: We present an analysis of electron recoils in cryogenic germanium detectors operated during the SuperCDMS Soudan experiment. The data are used to set new constraints on the axioelectric coupling of axion-like particles and the kinetic mixing parameter of dark photons, assuming the respective species constitutes all of the galactic dark matter. This study covers the mass range from 40 eV/$c^2$ to 5… ▽ More We present an analysis of electron recoils in cryogenic germanium detectors operated during the SuperCDMS Soudan experiment. The data are used to set new constraints on the axioelectric coupling of axion-like particles and the kinetic mixing parameter of dark photons, assuming the respective species constitutes all of the galactic dark matter. This study covers the mass range from 40 eV/$c^2$ to 500 eV/$c^2$ for both candidates, excluding previously untested parameter space for masses below ~1 keV/$c^2$. For the kinetic mixing of dark photons, values below $10^{-15}$ are reached for particle masses around 100 eV/$c^2$; for the axioelectric coupling of axion-like particles, values below $10^{-12}$ are reached for particles with masses in the range of a few-hundred eV/$c^2$. △ Less

Submitted 18 January, 2021; v1 submitted 26 November, 2019; originally announced November 2019.

Comments: 14 pages, 10 figures, 1 page correction included with 3 figures

Journal ref: Phys. Rev. D 101, 052008 (2020)

Observation of Dynamical Fermionization

Authors: Joshua M. Wilson, Neel Malvania, Yuan Le, Yicheng Zhang, Marcos Rigol, David S. Weiss

Abstract: We observe dynamical fermionization, where the momentum distribution of a Tonks-Girardeau (T-G) gas of strongly interacting bosons in 1D evolves from bosonic to fermionic after its axial confinement is removed. The asymptotic momentum distribution after expansion in 1D is the distribution of rapidities, which are the conserved quantities associated with many-body integrable systems. Rapidities hav… ▽ More We observe dynamical fermionization, where the momentum distribution of a Tonks-Girardeau (T-G) gas of strongly interacting bosons in 1D evolves from bosonic to fermionic after its axial confinement is removed. The asymptotic momentum distribution after expansion in 1D is the distribution of rapidities, which are the conserved quantities associated with many-body integrable systems. Rapidities have not previously been measured in any interacting many-body quantum system. Our measurements agree well with T-G gas theory. We also study momentum evolution after the trap depth is suddenly changed to a new non-zero value. We observe the predicted bosonic-fermionic oscillations and see deviations from the theory outside of the T-G gas limit. △ Less

Submitted 14 August, 2019; originally announced August 2019.

Journal ref: Science 367, 1461 (2020)

Machine learning determination of dynamical parameters: The Ising model case

Authors: Guido Cossu, Luigi Del Debbio, Tommaso Giani, Ava Khamseh, Michael Wilson

Abstract: We train a set of Restricted Boltzmann Machines (RBMs) on one- and two-dimensional Ising spin configurations at various values of temperature, generated using Monte Carlo simulations. We validate the training procedure by monitoring several estimators, including measurements of the log-likelihood, with the corresponding partition functions estimated using annealed importance sampling. The effects… ▽ More We train a set of Restricted Boltzmann Machines (RBMs) on one- and two-dimensional Ising spin configurations at various values of temperature, generated using Monte Carlo simulations. We validate the training procedure by monitoring several estimators, including measurements of the log-likelihood, with the corresponding partition functions estimated using annealed importance sampling. The effects of various choices of hyper-parameters on training the RBM are discussed in detail, with a generic prescription provided. Finally, we present a closed form expression for extracting the values of couplings, for every $n$-point interaction between the visible nodes of an RBM, in a binary system such as the Ising model. We aim at using this study as the foundation for further investigations of less well-known systems. △ Less

Submitted 26 October, 2018; originally announced October 2018.

Comments: 31 pages

Journal ref: Phys. Rev. B 100, 064304 (2019)

Energy-dependent 3-body loss in 1D Bose gases

Authors: Laura A. Zundel, Joshua M. Wilson, Neel Malvania, Lin Xia, Jean-Felix Riou, David S. Weiss

Abstract: We study the loss of atoms in quantum Newton's cradles (QNCs) with a range of average energies and transverse confinements. We find that the three-body collision rate in one-dimension is strongly energy dependent, as predicted by a strictly 1D theory. We adapt the theory to atoms in waveguides, then using detailed momentum measurements to infer all the collisions that occur, we compare the observe… ▽ More We study the loss of atoms in quantum Newton's cradles (QNCs) with a range of average energies and transverse confinements. We find that the three-body collision rate in one-dimension is strongly energy dependent, as predicted by a strictly 1D theory. We adapt the theory to atoms in waveguides, then using detailed momentum measurements to infer all the collisions that occur, we compare the observed loss to the adapted theory and find that they agree well. △ Less

Submitted 28 September, 2018; originally announced October 2018.

Journal ref: Phys. Rev. Lett. 122, 013402 (2019)

Search for Low-Mass Dark Matter with CDMSlite Using a Profile Likelihood Fit

Authors: SuperCDMS Collaboration, R. Agnese, T. Aralis, T. Aramaki, I. J. Arnquist, E. Azadbakht, W. Baker, S. Banik, D. Barker, D. A. Bauer, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, J. Cooley, B. Cornell, P. Cushman, F. De Brienne, T. Doughty , et al. (78 additional authors not shown)

Abstract: The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) searches for interactions between dark matter particles and germanium nuclei in cryogenic detectors. The experiment has achieved a low energy threshold with improved sensitivity to low-mass (<10 GeV/c$^2$) dark matter particles. We present an analysis of the final CDMSlite data set, taken with a different detector than… ▽ More The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) searches for interactions between dark matter particles and germanium nuclei in cryogenic detectors. The experiment has achieved a low energy threshold with improved sensitivity to low-mass (<10 GeV/c$^2$) dark matter particles. We present an analysis of the final CDMSlite data set, taken with a different detector than was used for the two previous CDMSlite data sets. This analysis includes a data "salting" method to protect against bias, improved noise discrimination, background modeling, and the use of profile likelihood methods to search for a dark matter signal in the presence of backgrounds. We achieve an energy threshold of 70 eV and significantly improve the sensitivity for dark matter particles with masses between 2.5 and 10 GeV/c$^2$ compared to previous analyses. We set an upper limit on the dark matter-nucleon scattering cross section in germanium of 5.4$\times$10$^{-42}$ cm$^2$ at 5 GeV/c$^2$, a factor of $\sim$2.5 improvement over the previous CDMSlite result. △ Less

Submitted 2 January, 2021; v1 submitted 27 August, 2018; originally announced August 2018.

Journal ref: Phys. Rev. D 99, 062001 (2019)

Production Rate Measurement of Tritium and Other Cosmogenic Isotopes in Germanium with CDMSlite

Authors: SuperCDMS Collaboration, R. Agnese, T. Aralis, T. Aramaki, I. J. Arnquist, E. Azadbakht, W. Baker, D. Barker, D. A. Bauer, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, J. Cooley, B. Cornell, P. Cushman, T. Doughty, E. Fascione, E. Figueroa-Feliciano, C. W. Fink , et al. (73 additional authors not shown)

Abstract: Future direct searches for low-mass dark matter particles with germanium detectors, such as SuperCDMS SNOLAB, are expected to be limited by backgrounds from radioactive isotopes activated by cosmogenic radiation inside the germanium. There are limited experimental data available to constrain production rates and a large spread of theoretical predictions. We examine the calculation of expected prod… ▽ More Future direct searches for low-mass dark matter particles with germanium detectors, such as SuperCDMS SNOLAB, are expected to be limited by backgrounds from radioactive isotopes activated by cosmogenic radiation inside the germanium. There are limited experimental data available to constrain production rates and a large spread of theoretical predictions. We examine the calculation of expected production rates, and analyze data from the second run of the CDMS low ionization threshold experiment (CDMSlite) to estimate the rates for several isotopes. We model the measured CDMSlite spectrum and fit for contributions from tritium and other isotopes. Using the knowledge of the detector history, these results are converted to cosmogenic production rates at sea level. The production rates in atoms/(kg$\cdot$day) are 74$\pm$9 for $^3$H, 1.5$\pm$0.7 for $^{55}$Fe, 17$\pm$5 for $^{65}$Zn, and 30$\pm$18 for $^{68}$Ge. △ Less

Submitted 16 August, 2019; v1 submitted 19 June, 2018; originally announced June 2018.

Comments: 14 pages, 10 figures, 5 tables. v5 contains the extended data release (and documentation) of the CDMSlite Run 2 data as ancillary files

Journal ref: R. Agnese et al. (SuperCDMS Collaboration), Astropart. Phys., 104 (2019) pp. 1-12

Energy Loss Due to Defect Formation from $^{206}$Pb Recoils in SuperCDMS Germanium Detectors

Authors: Robert Agnese, Taylor Aralis, Tsuguo Aramaki, Isaac Arnquist, Elham Azadbakht, William Baker, Samir Banik, D'Ann Barker, Dan Bauer, Thomas Binder, Michael Bowles, Paul Brink, Ray Bunker, Blas Cabrera, Robert Calkins, Concetta Cartaro, David Cerdeno, Yen-Yung Chang, Jodi Cooley, Brett Cornell, Priscilla Cushman, Philippe Di Stefano, Todd Doughty, Eleanor Fascione, Tali Figueroa , et al. (72 additional authors not shown)

Abstract: The Super Cryogenic Dark Matter Search experiment (SuperCDMS) at the Soudan Underground Laboratory studied energy loss associated with Frenkel defect formation in germanium crystals at mK temperatures using in situ $^{210}$Pb sources. We examine the spectrum of $^{206}$Pb nuclear recoils near its expected 103 keV endpoint energy and determine an energy loss of $\left(6.08\pm0.18\right)$ %, which w… ▽ More The Super Cryogenic Dark Matter Search experiment (SuperCDMS) at the Soudan Underground Laboratory studied energy loss associated with Frenkel defect formation in germanium crystals at mK temperatures using in situ $^{210}$Pb sources. We examine the spectrum of $^{206}$Pb nuclear recoils near its expected 103 keV endpoint energy and determine an energy loss of $\left(6.08\pm0.18\right)$ %, which we attribute to defect formation. From this result and using TRIM simulations, we extract the first experimentally determined average displacement threshold energy of $\left(19.7^{+0.6}_{-0.5}\right)$ eV for germanium. This has implications for the analysis thresholds of future germanium-based dark matter searches. △ Less

Submitted 16 April, 2019; v1 submitted 24 May, 2018; originally announced May 2018.

Comments: 4 Figures, Two data files, One data release description file

Journal ref: Appl. Phys. Lett. 113, 092101 (2018)

First Dark Matter Constraints from a SuperCDMS Single-Charge Sensitive Detector

Authors: SuperCDMS Collaboration, R. Agnese, T. Aralis, T. Aramaki, I. J. Arnquist, E. Azadbakht, W. Baker, S. Banik, D. Barker, D. A. Bauer, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, C. Cartaro, D. G. Cerdeno, Y. -Y. Chang, J. Cooley, B. Cornell, P. Cushman, P. C. F. Di Stefano, T. Doughty, E. Fascione , et al. (77 additional authors not shown)

Abstract: We present the first limits on inelastic electron-scattering dark matter and dark photon absorption using a prototype SuperCDMS detector having a charge resolution of 0.1 electron-hole pairs (CDMS HVeV, a 0.93 gram CDMS HV device). These electron-recoil limits significantly improve experimental constraints on dark matter particles with masses as low as 1 MeV/$\mathrm{c^2}$. We demonstrate a sensit… ▽ More We present the first limits on inelastic electron-scattering dark matter and dark photon absorption using a prototype SuperCDMS detector having a charge resolution of 0.1 electron-hole pairs (CDMS HVeV, a 0.93 gram CDMS HV device). These electron-recoil limits significantly improve experimental constraints on dark matter particles with masses as low as 1 MeV/$\mathrm{c^2}$. We demonstrate a sensitivity to dark photons competitive with other leading approaches but using substantially less exposure (0.49 gram days). These results demonstrate the scientific potential of phonon-mediated semiconductor detectors that are sensitive to single electronic excitations. △ Less

Submitted 22 December, 2020; v1 submitted 27 April, 2018; originally announced April 2018.

Comments: 6 pages + title and references, 6 figures, includes erratum submitted to PRL and data release

Journal ref: Phys. Rev. Lett. 121, 051301 (2018)

Nuclear-recoil energy scale in CDMS II silicon dark-matter detectors

Authors: R. Agnese, A. J. Anderson, T. Aramaki, W. Baker, D. Balakishiyeva, S. Banik, D. Barker, R. Basu Thakur, D. A. Bauer, T. Binder, A. Borgland, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, D. O. Caldwell, R. Calkins, C. Cartaro, D. G. Cerdeno, H. Chagani, Y. -Y. Chang, Y. Chen, J. Cooley, B. Cornell, P. Cushman , et al. (84 additional authors not shown)

Abstract: The Cryogenic Dark Matter Search (CDMS II) experiment aims to detect dark matter particles that elastically scatter from nuclei in semiconductor detectors. The resulting nuclear-recoil energy depositions are detected by ionization and phonon sensors. Neutrons produce a similar spectrum of low-energy nuclear recoils in such detectors, while most other backgrounds produce electron recoils. The absol… ▽ More The Cryogenic Dark Matter Search (CDMS II) experiment aims to detect dark matter particles that elastically scatter from nuclei in semiconductor detectors. The resulting nuclear-recoil energy depositions are detected by ionization and phonon sensors. Neutrons produce a similar spectrum of low-energy nuclear recoils in such detectors, while most other backgrounds produce electron recoils. The absolute energy scale for nuclear recoils is necessary to interpret results correctly. The energy scale can be determined in CDMS II silicon detectors using neutrons incident from a broad-spectrum $^{252}$Cf source, taking advantage of a prominent resonance in the neutron elastic scattering cross section of silicon at a recoil (neutron) energy near 20 (182) keV. Results indicate that the phonon collection efficiency for nuclear recoils is $4.8^{+0.7}_{-0.9}$% lower than for electron recoils of the same energy. Comparisons of the ionization signals for nuclear recoils to those measured previously by other groups at higher electric fields indicate that the ionization collection efficiency for CDMS II silicon detectors operated at $\sim$4 V/cm is consistent with 100% for nuclear recoils below 20 keV and gradually decreases for larger energies to $\sim$75% at 100 keV. The impact of these measurements on previously published CDMS II silicon results is small. △ Less

Submitted 27 July, 2018; v1 submitted 7 March, 2018; originally announced March 2018.

Comments: 22 pages, 17 figures, 1 table, 1 appendix

Dissipation induced dipole blockade and anti-blockade in driven Rydberg systems

Authors: Jeremy T. Young, Thomas Boulier, Eric Magnan, Elizabeth A. Goldschmidt, Ryan M. Wilson, Steven L. Rolston, James V. Porto, Alexey V. Gorshkov

Abstract: We study theoretically and experimentally the competing blockade and anti-blockade effects induced by spontaneously generated contaminant Rydberg atoms in driven Rydberg systems. These contaminant atoms provide a source of strong dipole-dipole interactions and play a crucial role in the system's behavior. We study this problem theoretically using two different approaches. The first is a cumulant e… ▽ More We study theoretically and experimentally the competing blockade and anti-blockade effects induced by spontaneously generated contaminant Rydberg atoms in driven Rydberg systems. These contaminant atoms provide a source of strong dipole-dipole interactions and play a crucial role in the system's behavior. We study this problem theoretically using two different approaches. The first is a cumulant expansion approximation, in which we ignore third-order and higher connected correlations. Using this approach for the case of resonant drive, a many-body blockade radius picture arises, and we find qualitative agreement with previous experimental results. We further predict that as the atomic density is increased, the Rydberg population's dependence on Rabi frequency will transition from quadratic to linear dependence at lower Rabi frequencies. We study this behavior experimentally by observing this crossover at two different atomic densities. We confirm that the larger density system has a smaller crossover Rabi frequency than the smaller density system. The second theoretical approach is a set of phenomenological inhomogeneous rate equations. We compare the results of our rate equation model to the experimental observations in [E. A. Goldschmidt, et al., PRL 116, 113001 (2016)] and find that these rate equations provide quantitatively good scaling behavior of the steady-state Rydberg population for both resonant and off-resonant drive. △ Less

Submitted 24 October, 2017; v1 submitted 4 October, 2017; originally announced October 2017.

Comments: 16 pages, 13 figures

Journal ref: Phys. Rev. A 97, 023424 (2018)

Low-Mass Dark Matter Search with CDMSlite

Authors: SuperCDMS Collaboration, R. Agnese, A. J. Anderson, T. Aralis, T. Aramaki, I. J. Arnquist, W. Baker, D. Balakishiyeva, D. Barker, R. Basu Thakur, D. A. Bauer, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, D. O. Caldwell, R. Calkins, C. Cartaro, D. G. Cerdeno, Y. Chang, H. Chagani, Y. Chen, J. Cooley, B. Cornell , et al. (83 additional authors not shown)

Abstract: The SuperCDMS experiment is designed to directly detect weakly interacting massive particles (WIMPs) that may constitute the dark matter in our Galaxy. During its operation at the Soudan Underground Laboratory, germanium detectors were run in the CDMSlite mode to gather data sets with sensitivity specifically for WIMPs with masses ${<}$10 GeV/$c^2$. In this mode, a higher detector-bias voltage is… ▽ More The SuperCDMS experiment is designed to directly detect weakly interacting massive particles (WIMPs) that may constitute the dark matter in our Galaxy. During its operation at the Soudan Underground Laboratory, germanium detectors were run in the CDMSlite mode to gather data sets with sensitivity specifically for WIMPs with masses ${<}$10 GeV/$c^2$. In this mode, a higher detector-bias voltage is applied to amplify the phonon signals produced by drifting charges. This paper presents studies of the experimental noise and its effect on the achievable energy threshold, which is demonstrated to be as low as 56 eV$_{\text{ee}}$ (electron equivalent energy). The detector-biasing configuration is described in detail, with analysis corrections for voltage variations to the level of a few percent. Detailed studies of the electric-field geometry, and the resulting successful development of a fiducial parameter, eliminate poorly measured events, yielding an energy resolution ranging from ${\sim}$9 eV$_{\text{ee}}$ at 0 keV to 101 eV$_{\text{ee}}$ at ${\sim}$10 eV$_{\text{ee}}$. New results are derived for astrophysical uncertainties relevant to the WIMP-search limits, specifically examining how they are affected by variations in the most probable WIMP velocity and the Galactic escape velocity. These variations become more important for WIMP masses below 10 GeV/$c^2$. Finally, new limits on spin-dependent low-mass WIMP-nucleon interactions are derived, with new parameter space excluded for WIMP masses $\lesssim$3 GeV/$c^2$ △ Less

Submitted 18 January, 2018; v1 submitted 6 July, 2017; originally announced July 2017.

Comments: 30 Pages, 33 Figures v3 to match published version in PRD. v2 contains public release (and documentation) of the CDMSlite Run 2 data as ancillary files

Journal ref: Phys. Rev. D 97, 022002 (2018)

Multi-district preference modelling

Authors: Geoffrey Pritchard, Mark C. Wilson

Abstract: Generating realistic artificial preference distributions is an important part of any simulation analysis of electoral systems. While this has been discussed in some detail in the context of a single electoral district, many electoral systems of interest are based on multiple districts. Neither treating preferences between districts as independent nor ignoring the district structure yields satisfac… ▽ More Generating realistic artificial preference distributions is an important part of any simulation analysis of electoral systems. While this has been discussed in some detail in the context of a single electoral district, many electoral systems of interest are based on multiple districts. Neither treating preferences between districts as independent nor ignoring the district structure yields satisfactory results. We present a model based on an extension of the classic Eggenberger-Pólya urn, in which each district is represented by an urn and there is correlation between urns. We show in detail that this procedure has a small number of tunable parameters, is computationally efficient, and produces "realistic-looking" distributions. We intend to use it in further studies of electoral systems. △ Less

Submitted 28 June, 2017; originally announced June 2017.

Comments: 10 pages, 15 figures, 1 table

MSC Class: 91B12

Ag colloids and arrays for plasmonic non-radiative energy transfer from quantum dots to a quantum well

Authors: Graham P. Murphy, John J. Gough, Luke J. Higgins, Vasilios D. Karanikolas, Keith M. Wilson, Jorge A. Garcia Coindreau, Vitaly Z. Zubialevich, Peter J. Parbrook, A. Louise Bradley

Abstract: Ag nanoparticles in the form of colloids and ordered arrays are used to demonstrate plasmon-mediated non-radiative energy transfer from quantum dots to quantum wells with varying top barrier thicknesses. Plasmon-mediated energy transfer efficiencies of up to ~25% are observed with the Ag colloids. The distance dependence of the plasmon-mediated energy transfer is found to follow the same d^{-4} de… ▽ More Ag nanoparticles in the form of colloids and ordered arrays are used to demonstrate plasmon-mediated non-radiative energy transfer from quantum dots to quantum wells with varying top barrier thicknesses. Plasmon-mediated energy transfer efficiencies of up to ~25% are observed with the Ag colloids. The distance dependence of the plasmon-mediated energy transfer is found to follow the same d^{-4} dependence as the direct quantum dot to quantum well energy transfer. There is also evidence for an increase in the characteristic distance of the interaction, thus indicating that it follows a Förster-like model with the Ag nanoparticle-quantum dot acting as an enhanced donor dipole. Ordered Ag nanoparticle arrays display plasmon-mediated energy transfer efficiencies up to ~21%. To explore the tunability of the array system, two arrays with different geometries are presented. It is demonstrated that changing the geometry of the array allows a transition from overall quenching of the acceptor quantum well emission to enhancement, as well as control of the competition between the quantum dot donor quenching and energy transfer rates. △ Less

Submitted 12 September, 2016; originally announced September 2016.

Strongly interacting photons in one-dimensional continuum

Authors: Dibyendu Roy, C. M. Wilson, Ofer Firstenberg

Abstract: Photon-photon scattering in vacuum is extremely weak. However, strong effective interactions between single photons can be realized by employing strong light-matter coupling. These interactions are a fundamental building block for quantum optics, bringing many-body physics to the photonic world and providing important resources for quantum photonic devices and for optical metrology. In this Colloq… ▽ More Photon-photon scattering in vacuum is extremely weak. However, strong effective interactions between single photons can be realized by employing strong light-matter coupling. These interactions are a fundamental building block for quantum optics, bringing many-body physics to the photonic world and providing important resources for quantum photonic devices and for optical metrology. In this Colloquium, we review the physics of strongly-interacting photons in one-dimensional systems with no optical confinement along the propagation direction. We focus on two recently-demonstrated experimental realizations: superconducting qubits coupled to open transmission lines, and interacting Rydberg atoms in a cold gas. Advancements in the theoretical understanding of these systems are presented in complementary formalisms and compared to experimental results. The experimental achievements are summarized alongside a description of the quantum optical effects and quantum devices emerging from them. △ Less

Submitted 14 February, 2017; v1 submitted 21 March, 2016; originally announced March 2016.

Comments: Updated version, accepted for publication in Reviews of Modern Physics

Journal ref: Rev. Mod. Phys. 89, 021001 (2017)

Bright focused ion beam sources based on laser-cooled atoms

Authors: J. J. McClelland, A. V. Steele, B. Knuffman, K. A. Twedt, A. Schwarzkopf, T. M. Wilson

Abstract: Nanoscale focused ion beams (FIBs) represent one of the most useful tools in nanotechnology, enabling nanofabrication via milling and gas-assisted deposition, microscopy and microanalysis, and selective, spatially resolved do** of materials. Recently, a new type of FIB source has emerged, which uses ionization of laser cooled neutral atoms to produce the ion beam. The extremely cold temperatures… ▽ More Nanoscale focused ion beams (FIBs) represent one of the most useful tools in nanotechnology, enabling nanofabrication via milling and gas-assisted deposition, microscopy and microanalysis, and selective, spatially resolved do** of materials. Recently, a new type of FIB source has emerged, which uses ionization of laser cooled neutral atoms to produce the ion beam. The extremely cold temperatures attainable with laser cooling (in the range of 100 uK or below) result in a beam of ions with a very small transverse velocity distribution. This corresponds to a source with extremely high brightness that rivals or may even exceed the brightness of the industry standard Ga+ liquid metal ion source. In this review we discuss the context of ion beam technology in which these new ion sources can play a role, their principles of operation, and some examples of recent demonstrations. The field is relatively new, so only a few applications have been demonstrated, most notably low energy ion microscopy with Li ions. Nevertheless, a number of promising new approaches have been proposed and/or demonstrated, suggesting that a rapid evolution of this type of source is likely in the near future. △ Less

Submitted 10 February, 2016; v1 submitted 29 October, 2015; originally announced October 2015.

Journal ref: Applied Physics Review 3, 011302 (2016)

Measuring Partial Balance in Signed Networks

Authors: Samin Aref, Mark C. Wilson

Abstract: Is the enemy of an enemy necessarily a friend? If not, to what extent does this tend to hold? Such questions were formulated in terms of signed (social) networks and necessary and sufficient conditions for a network to be "balanced" were obtained around 1960. Since then the idea that signed networks tend over time to become more balanced has been widely used in several application areas. However,… ▽ More Is the enemy of an enemy necessarily a friend? If not, to what extent does this tend to hold? Such questions were formulated in terms of signed (social) networks and necessary and sufficient conditions for a network to be "balanced" were obtained around 1960. Since then the idea that signed networks tend over time to become more balanced has been widely used in several application areas. However, investigation of this hypothesis has been complicated by the lack of a standard measure of partial balance, since complete balance is almost never achieved in practice. We formalize the concept of a measure of partial balance, discuss various measures, compare the measures on synthetic datasets, and investigate their axiomatic properties. The synthetic data involves Erdős-Rényi and specially structured random graphs. We show that some measures behave better than others in terms of axioms and ability to differentiate between graphs. We also use well-known datasets from the sociology and biology literature, such as Read's New Guinean tribes, gene regulatory networks related to two organisms, and a network involving senate bill co-sponsorship. Our results show that substantially different levels of partial balance is observed under cycle-based, eigenvalue-based, and frustration-based measures. We make some recommendations for measures to be used in future work. △ Less

Submitted 20 August, 2018; v1 submitted 14 September, 2015; originally announced September 2015.

Comments: Peer-reviewed author copy, 31 pages, 6 figures, 5 tables

MSC Class: 05C22; 05C38; 91D30; 90B10

Journal ref: Journal of Complex Networks 6, 4 (2018), 566-595

Structural and optical properties of cobalt slanted columnar thin films conformally coated with graphene by chemical vapor deposition

Authors: P. M. Wilson, D. Schmidt, E. Schubert, M. Schubert, A. Sinitskii, T. Hofmann

Abstract: A slanted cobalt sculptured columnar thin film was fabricated using glancing angle deposition, and coated subsequently with graphene using a low temperature chemical vapor deposition process. The graphene deposition process preserves shape and geometry of the sculptured thin film, which was confirmed by scanning electron microscopy. According to the Raman spectroscopy results, the graphene coating… ▽ More A slanted cobalt sculptured columnar thin film was fabricated using glancing angle deposition, and coated subsequently with graphene using a low temperature chemical vapor deposition process. The graphene deposition process preserves shape and geometry of the sculptured thin film, which was confirmed by scanning electron microscopy. According to the Raman spectroscopy results, the graphene coating is two to three monolayers thick and has a high defect concentration. The graphene coverage within the sculptured thin film is determined from generalized spectroscopic ellipsometry using a generalized anisotropic Bruggeman effective medium approximation. The graphene coverage as well as structural parameters of the thin film agree excellently with electron microscopy and Raman observations, and suggest that the graphene coating is conformal. △ Less

Submitted 18 December, 2013; originally announced December 2013.