-
Phase-space analysis of a two-section InP laser as an all-optical spiking neuron: dependency on control and design parameters
Authors:
Lukas Puts,
Daan Lenstra,
Kevin Williams,
Weiming Yao
Abstract:
Using a rate-equation model we numerically evaluate the carrier concentration and photon number in an integrated two-section semiconductor laser, and analyse its dynamics in three-dimensional phase space. The simulation comprises compact model descriptions extracted from a commercially-available generic InP technology platform, allowing us to model an applied reverse-bias voltage to the saturable…
▽ More
Using a rate-equation model we numerically evaluate the carrier concentration and photon number in an integrated two-section semiconductor laser, and analyse its dynamics in three-dimensional phase space. The simulation comprises compact model descriptions extracted from a commercially-available generic InP technology platform, allowing us to model an applied reverse-bias voltage to the saturable absorber. We use the model to study the influence of the injected gain current, reverse-bias voltage, and cavity mirror reflectivity on the excitable operation state, which is the operation mode desired for the laser to act as an all-optical integrated neuron. We show in phase-space that our model is capable of demonstrating four different operation modes, i.e. cw, self-pulsating and an on-set and excitable mode under optical pulse injection. In addition, we show that lowering the reflectivity of one of the cavity mirrors greatly enhances the control parameter space for excitable operation, enabling more relaxed operation parameter control and lower power consumption of an integrated two-section laser neuron.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Efficiency-boosted semiconductor optical amplifiers via mode-division multiplexing
Authors:
Yi Wang,
Yihui Wei,
Victor Dolores-Calzadilla,
Daoxin Dai,
Kevin Williams,
Meint Smit,
Yuqing Jiao
Abstract:
Semiconductor optical amplifiers (SOA) are a fundamental building block for many photonic systems. However, their power inefficiency has been setting back operational cost reduction, and the resulting thermal losses constrain miniaturization, and the realization of more complex photonic functions such as large-scale switches and optical phased arrays. In this work, we demonstrate significant gain…
▽ More
Semiconductor optical amplifiers (SOA) are a fundamental building block for many photonic systems. However, their power inefficiency has been setting back operational cost reduction, and the resulting thermal losses constrain miniaturization, and the realization of more complex photonic functions such as large-scale switches and optical phased arrays. In this work, we demonstrate significant gain and efficiency enhancement using an extra degree of freedom of light - the mode space. This is done without changing the SOA's material design, and therefore high versatility and compatibility can be obtained. Light is multiplexed in different guided modes and is reinjected into the same gain section twice without introducing resonance, doubling the interaction length in a broadband manner. Up to 87% higher gain and 300% higher wall-plug efficiency are obtained in a double-pass SOA compared to a conventional single-pass SOA, at the same operating current, in the wavelength range of 1560 - 1580 nm.
△ Less
Submitted 18 March, 2023; v1 submitted 13 March, 2023;
originally announced March 2023.
-
PyQMC: an all-Python real-space quantum Monte Carlo module in PySCF
Authors:
William A. Wheeler,
Shivesh Pathak,
Kevin Kleiner,
Shunyue Yuan,
João N. B. Rodrigues,
Cooper Lorsung,
Kittithat Krongchon,
Yueqing Chang,
Yiqing Zhou,
Brian Busemeyer,
Kiel T. Williams,
Alexander Muñoz,
Chun Yu Chow,
Lucas K. Wagner
Abstract:
We describe a new open-source Python-based package for high accuracy correlated electron calculations using quantum Monte Carlo (QMC) in real space: PyQMC. PyQMC implements modern versions of QMC algorithms in an accessible format, enabling algorithmic development and easy implementation of complex workflows. Tight integration with the PySCF environment allows for simple comparison between QMC cal…
▽ More
We describe a new open-source Python-based package for high accuracy correlated electron calculations using quantum Monte Carlo (QMC) in real space: PyQMC. PyQMC implements modern versions of QMC algorithms in an accessible format, enabling algorithmic development and easy implementation of complex workflows. Tight integration with the PySCF environment allows for simple comparison between QMC calculations and other many-body wave function techniques, as well as access to high accuracy trial wave functions.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Bayesian, frequentist, and information geometric approaches to parametric uncertainty quantification of classical empirical interatomic potentials
Authors:
Yonatan Kurniawan,
Cody L. Petrie,
Kinamo J. Williams,
Mark K. Transtrum,
Ellad B. Tadmor,
Ryan S. Elliott,
Daniel S. Karls,
Mingjian Wen
Abstract:
In this paper, we consider the problem of quantifying parametric uncertainty in classical empirical interatomic potentials (IPs) using both Bayesian (Markov Chain Monte Carlo) and frequentist (profile likelihood) methods. We interface these tools with the Open Knowledgebase of Interatomic Models and study three models based on the Lennard-Jones, Morse, and Stillinger--Weber potentials. We confirm…
▽ More
In this paper, we consider the problem of quantifying parametric uncertainty in classical empirical interatomic potentials (IPs) using both Bayesian (Markov Chain Monte Carlo) and frequentist (profile likelihood) methods. We interface these tools with the Open Knowledgebase of Interatomic Models and study three models based on the Lennard-Jones, Morse, and Stillinger--Weber potentials. We confirm that IPs are typically sloppy, i.e., insensitive to coordinated changes in some parameter combinations. Because the inverse problem in such models is ill-conditioned, parameters are unidentifiable. This presents challenges for traditional statistical methods, as we demonstrate and interpret within both Bayesian and frequentist frameworks. We use information geometry to illuminate the underlying cause of this phenomenon and show that IPs have global properties similar to those of sloppy models from fields such as systems biology, power systems, and critical phenomena. IPs correspond to bounded manifolds with a hierarchy of widths, leading to low effective dimensionality in the model. We show how information geometry can motivate new, natural parameterizations that improve the stability and interpretation of uncertainty quantification analysis and further suggest simplified, less-sloppy models.
△ Less
Submitted 14 June, 2022; v1 submitted 20 December, 2021;
originally announced December 2021.
-
Scale-dependent Rayleigh-Taylor dynamics with variable acceleration by group theory approach
Authors:
Snezhana Abarzhi,
Kurt Williams
Abstract:
This work focuses on Rayleigh-Taylor instability (RTI)driven by acceleration with power-law time-dependence. We review the existing theoretical approaches, apply the group theory approach to solve this long-standing problem, and yield the unified framework for the scale-dependent dynamics of Rayleigh-Taylor (RT) bubbles and RT spikes. For the early-time linear dynamics we provide the dependence of…
▽ More
This work focuses on Rayleigh-Taylor instability (RTI)driven by acceleration with power-law time-dependence. We review the existing theoretical approaches, apply the group theory approach to solve this long-standing problem, and yield the unified framework for the scale-dependent dynamics of Rayleigh-Taylor (RT) bubbles and RT spikes. For the early-time linear dynamics we provide the dependence of RTI evolution on the acceleration parameters and the initial conditions. For the late-time nonlinear dynamics, we find a continuous family of asymptotic solutions, directly link the interface velocity to the interface morphology and the interfacial shear, derive solutions for the regular bubbles and for the singular spikes, and study stability of these solutions. The properties of special nonlinear solutions in the RT family are scrupulously described, including the critical, the Taylor, the Layzer-drag, and the Atwood solutions. It is shown that the fastest Atwood bubble is regular and stable, and the fastest Atwood spike is singular and unstable. The essentially multi-scale and interfacial character of RT dynamics is demonstrated. The former can be understood by viewing RT coherent structure of bubbles and spikes as a standing wave with the growing amplitude. The latter implies that RT flow has effectively no motion of the fluids away from the interface and has intense motion of the fluids near the interface, with shear-driven vortical structures appearing at the interface. Our theory agrees with available observations, and elaborates extensive benchmarks for future research and for better understanding of RT driven phenomena in plasmas.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Spatial Sampling of Terahertz Fields with Sub-wavelength Accuracy via Probe Beam Encoding
Authors:
Jiapeng Zhao,
Yiwen E,
Kaia Williams,
Xi-cheng Zhang,
Robert Boyd
Abstract:
Recently, computational sampling methods have been implemented to spatially characterize terahertz (THz) fields. Previous methods usually rely on either specialized THz devices such as THz spatial light modulators, or complicated systems requiring assistance from photon-excited free-carriers with high-speed synchronization among multiple optical beams. Here, by spatially encoding an 800 nm near-in…
▽ More
Recently, computational sampling methods have been implemented to spatially characterize terahertz (THz) fields. Previous methods usually rely on either specialized THz devices such as THz spatial light modulators, or complicated systems requiring assistance from photon-excited free-carriers with high-speed synchronization among multiple optical beams. Here, by spatially encoding an 800 nm near-infrared (NIR) probe beam through the use of an optical SLM, we demonstrate a simple sampling approach that can probe THz fields with a single-pixel camera. This design does not require any dedicated THz devices, semiconductors or nanofilms to modulate THz fields. Through the use of computational algorithms, we successfully measure 128$\times$128 field distributions with a 62 $μm$ transverse spatial resolution, more than 15 times smaller than the central wavelength of the THz signal (940 $μm$). Benefitting from the non-invasive nature of THz radiation and sub-wavelength resolution of our system, this simple approach can be used in applications such as biomedical sensing, inspection of flaws. in industrial products, and so on.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
Design Of The LBNF Beamline
Authors:
V. Papadimitriou,
K. Ammigan,
J. Anderson Jr.,
K. E. Anderson,
R. Andrews,
V. Bocean,
C. F. Crowley,
N. Eddy,
B. D. Hartsell,
S. Hays,
P. Hurh,
J. Hylen,
J. A. Johnstone,
P. Kasper,
T. Kobilarcik,
G. E. Krafczyk,
B. Lundberg,
A. Marchionni,
N. V. Mokhov,
C. D. Moore,
D. Pushka,
I. Rakhno,
S. D. Reitzner,
P. Schlabach,
V. Sidorov
, et al. (9 additional authors not shown)
Abstract:
The Long Baseline Neutrino Facility (LBNF) will utilize a beamline located at Fermilab to provide and aim a neutrino beam of sufficient intensity and appropriate energy range toward the Deep Underground Neutrino Experiment (DUNE) detectors, placed deep underground at the SURF Facility in Lead, South Dakota. The primary proton beam (60-120 GeV) will be extracted from the MI-10 section of Fermilab's…
▽ More
The Long Baseline Neutrino Facility (LBNF) will utilize a beamline located at Fermilab to provide and aim a neutrino beam of sufficient intensity and appropriate energy range toward the Deep Underground Neutrino Experiment (DUNE) detectors, placed deep underground at the SURF Facility in Lead, South Dakota. The primary proton beam (60-120 GeV) will be extracted from the MI-10 section of Fermilab's Main Injector. Neutrinos will be produced when the protons interact with a solid target to produce mesons which will be subsequently focused by magnetic horns into a 194m long decay pipe where they decay into muons and neutrinos. The parameters of the facility were determined taking into account the physics goals, spatial and radiological constraints, and the experience gained by operating the NuMI facility at Fermilab. The Beamline facility is designed for initial operation at a proton-beam power of 1.2 MW, with the capability to support an upgrade to 2.4 MW. LBNF/DUNE obtained CD-1 approval in November 2015. We discuss here the design status and the associated challenges as well as the R&D and plans for improvements before baselining the facility.
△ Less
Submitted 14 April, 2017;
originally announced April 2017.
-
Computational Study of Amplitude-to-Phase Conversion in a Modified Uni-Traveling Carrier (MUTC) Photodetector
Authors:
Yue Hu,
Curtis R. Menyuk,
Xiaojun Xie,
Meredith N. Hutchinson,
Vincent J. Urick,
Joe C. Campbell,
Keith J. Williams
Abstract:
We calculate the amplitude-to-phase (AM-to-PM) noise conversion in a modified unitraveling carrier (MUTC) photodetector. We obtained two nulls as measured in the experiments, and we explain their origin. The nulls appear due to the transit time variation when the average photocurrent varies, and the transit time variation is due to the change of electron velocity when the average photocurrent vari…
▽ More
We calculate the amplitude-to-phase (AM-to-PM) noise conversion in a modified unitraveling carrier (MUTC) photodetector. We obtained two nulls as measured in the experiments, and we explain their origin. The nulls appear due to the transit time variation when the average photocurrent varies, and the transit time variation is due to the change of electron velocity when the average photocurrent varies. We also show that the AM-to-PM conversion coefficient depends only on the pulse energy and is independent of the pulse duration when the duration is less than 500 fs. When the pulse duration is larger than 500 fs, the nulls of the AM-to-PM conversion coefficient shift to larger average photocurrents. This shift occurs because the increase in that pulse duration leads to a decrease in the peak photocurrent. The AM-to-PM noise conversion coefficient changes as the repetition rate varies. However, the repetition rate does not change the AM-to-PM conversion coefficient as a function of input optical pulse energy. The repetition rate changes the average photocurrent. We propose a design that would in theory improve the performance of the device.
△ Less
Submitted 22 February, 2017;
originally announced February 2017.
-
Design of the LBNF Beamline Target Station
Authors:
S. Tariq,
K. Ammigan,
K. Anderson,
S. A. Buccellato,
C. F. Crowley,
B. D. Hartsell,
P. Hurh,
J. Hylen,
P. Kasper,
G. E. Krafczyk,
A. Lee,
B. Lundberg,
A. Marchionni,
N. V. Mokhov,
C. D. Moore,
V. Papadimitriou,
D. Pushka,
I. Rakhno,
S. D. Reitzner,
V. Sidorov,
A. M. Stefanik,
I. S . Tropin,
K. Vaziri,
K. Williams,
R. M. Zwaska
, et al. (1 additional authors not shown)
Abstract:
The Long Baseline Neutrino Facility (LBNF) project will build a beamline located at Fermilab to create and aim an intense neutrino beam of appropriate energy range toward the DUNE detectors at the SURF facility in Lead, South Dakota. Neutrino production starts in the Target Station, which consists of a solid target, magnetic focusing horns, and the associated sub-systems and shielding infrastructu…
▽ More
The Long Baseline Neutrino Facility (LBNF) project will build a beamline located at Fermilab to create and aim an intense neutrino beam of appropriate energy range toward the DUNE detectors at the SURF facility in Lead, South Dakota. Neutrino production starts in the Target Station, which consists of a solid target, magnetic focusing horns, and the associated sub-systems and shielding infrastructure. Protons hit the target producing mesons which are then focused by the horns into a helium-filled decay pipe where they decay into muons and neutrinos. The target and horns are encased in actively cooled steel and concrete shielding in a chamber called the target chase. The reference design chase is filled with air, but nitrogen and helium are being evaluated as alternatives. A replaceable beam window separates the decay pipe from the target chase. The facility is designed for initial operation at 1.2 MW, with the ability to upgrade to 2.4 MW, and is taking advantage of the experience gained by operating Fermilab's NuMI facility. We discuss here the design status, associated challenges, and ongoing R&D and physics-driven component optimization of the Target Station.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
The Astropy Problem
Authors:
Demitri Muna,
Michael Alexander,
Alice Allen,
Richard Ashley,
Daniel Asmus,
Ruyman Azzollini,
Michele Bannister,
Rachael Beaton,
Andrew Benson,
G. Bruce Berriman,
Maciej Bilicki,
Peter Boyce,
Joanna Bridge,
Jan Cami,
Eryn Cangi,
Xian Chen,
Nicholas Christiny,
Christopher Clark,
Michelle Collins,
Johan Comparat,
Neil Cook,
Darren Croton,
Isak Delberth Davids,
Éric Depagne,
John Donor
, et al. (129 additional authors not shown)
Abstract:
The Astropy Project (http://astropy.org) is, in its own words, "a community effort to develop a single core package for Astronomy in Python and foster interoperability between Python astronomy packages." For five years this project has been managed, written, and operated as a grassroots, self-organized, almost entirely volunteer effort while the software is used by the majority of the astronomical…
▽ More
The Astropy Project (http://astropy.org) is, in its own words, "a community effort to develop a single core package for Astronomy in Python and foster interoperability between Python astronomy packages." For five years this project has been managed, written, and operated as a grassroots, self-organized, almost entirely volunteer effort while the software is used by the majority of the astronomical community. Despite this, the project has always been and remains to this day effectively unfunded. Further, contributors receive little or no formal recognition for creating and supporting what is now critical software. This paper explores the problem in detail, outlines possible solutions to correct this, and presents a few suggestions on how to address the sustainability of general purpose astronomical software.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
-
First measurement of muon-neutrino disappearance in NOvA
Authors:
P. Adamson,
C. Ader,
M. Andrews,
N. Anfimov,
I. Anghel,
K. Arms,
E. Arrieta-Diaz,
A. Aurisano,
D. Ayres,
C. Backhouse,
M. Baird,
B. A. Bambah,
K. Bays,
R. Bernstein,
M. Betancourt,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
K. Biery,
T. Blackburn,
V. Bocean,
D. Bogert,
A. Bolshakova,
M. Bowden,
C. Bower
, et al. (235 additional authors not shown)
Abstract:
This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68%…
▽ More
This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68% confidence level, with two statistically-degenerate best fit points at $\sin^2θ_{23} = $ 0.43 and 0.60. Results for the inverted mass hierarchy are also presented.
△ Less
Submitted 20 January, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
First measurement of electron neutrino appearance in NOvA
Authors:
P. Adamson,
C. Ader,
M. Andrews,
N. Anfimov,
I. Anghel,
K. Arms,
E. Arrieta-Diaz,
A. Aurisano,
D. S. Ayres,
C. Backhouse,
M. Baird,
B. A. Bambah,
K. Bays,
R. Bernstein,
M. Betancourt,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
K. Biery,
T. Blackburn,
V. Bocean,
D. Bogert,
A. Bolshakova,
M. Bowden,
C. Bower
, et al. (235 additional authors not shown)
Abstract:
We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a backg…
▽ More
We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a background of $1.07\pm0.14$ (syst.). The $3.3σ$ excess of events observed in the primary analysis disfavors $0.1π< δ_{CP} < 0.5π$ in the inverted mass hierarchy at the 90% C.L.
△ Less
Submitted 2 May, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
Using Local Operator Fluctuations to Identify Wave Function Improvements
Authors:
Kiel T. Williams,
Lucas K. Wagner
Abstract:
A method is developed that allows analysis of quantum Monte Carlo simulations to identify errors in trial wave functions. The purpose of this method is to allow for the systematic improvement of variational wave functions by identifying degrees of freedom that are not well-described by an initial trial state. We provide proof of concept implementations of this method by identifying the need for a…
▽ More
A method is developed that allows analysis of quantum Monte Carlo simulations to identify errors in trial wave functions. The purpose of this method is to allow for the systematic improvement of variational wave functions by identifying degrees of freedom that are not well-described by an initial trial state. We provide proof of concept implementations of this method by identifying the need for a Jastrow correlation factor, and implementing a selected multi-determinant wave function algorithm for small dimers that systematically decreases the variational energy. Selection of the two-particle excitations is done using quantum Monte Carlo within the presence of a Jastrow correlation factor, and without the need to explicitly construct the determinants. We also show how this technique can be used to design compact wave functions for transition metal systems. This method may provide a route to analyze and systematically improve descriptions of complex quantum systems in a scalable way.
△ Less
Submitted 21 January, 2016; v1 submitted 5 June, 2015;
originally announced June 2015.
-
Current status of the LBNE neutrino beam
Authors:
Craig Damon Moore,
Ken Bourkland,
Cory Francis Crowley,
Patrick Hurh,
James Hylen,
Byron Lundberg,
Alberto Marchionni,
Mike McGee,
Nikolai V. Mokhov,
Vaia Papadimitriou,
Rob Plunkett,
Sarah Diane Reitzner,
Andrew M Stefanik,
Gueorgui Velev,
Karlton Williams,
Robert Miles Zwaska
Abstract:
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into…
▽ More
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into the decay pipe, towards the far detector. Finally, the mesons that enter the decay pipe decay into neutrinos. The parameters of the facility were determined by an amalgam of the physics goals, the Monte Carlo modeling of the facility, and the experience gained by operating the NuMI facility at Fermilab. The initial beam power is expected to be ~700 kW, however some of the parameters were chosen to be able to deal with a beam power of 2.3 MW. The LBNE Neutrino Beam has made significant changes to the initial design through consideration of numerous Value Engineering proposals and the current design is described.
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
-
Overview of the LBNE Neutrino Beam
Authors:
C. D. Moore,
Yun He,
Patrick Hurh,
James Hylen,
Byron Lundberg,
Mike McGee,
Joel Misek,
Nikolai V. Mokhov,
Vaia Papadimitriou,
Rob Plunkett,
Ryan Schultz,
Gueorgui Velev,
Karlton Williams,
Robert Miles Zwaska
Abstract:
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed at the Deep Underground Science and Engineering Laboratory (DUSEL) in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Th…
▽ More
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed at the Deep Underground Science and Engineering Laboratory (DUSEL) in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into the decay pipe, towards the far detector. Finally, the mesons that enter the decay pipe decay into neutrinos. The parameters of the facility were determined by an amalgam of the physics goals, the Monte Carlo modeling of the facility, and the experience gained by operating the NuMI facility at Fermilab. The initial beam power is expected to be ~700 kW, however some of the parameters were chosen to be able to deal with a beam power of 2.3 MW.
△ Less
Submitted 11 September, 2012;
originally announced September 2012.
-
Could Dark Energy be a Manifestation of Gravity?
Authors:
Reva Kay Williams
Abstract:
It is shown that so-called dark energy could possible be a manifestation of the gravitational vortex producing the "gravitomagnetic" (GM) force field: associated with cosmic matter rotation and inertial spacetime frame dragging. The general relativistic Godel-Obukhov spacetime metric which incorporates expansion and rotation of the Universe is used to evaluate this force. This metric is expressed…
▽ More
It is shown that so-called dark energy could possible be a manifestation of the gravitational vortex producing the "gravitomagnetic" (GM) force field: associated with cosmic matter rotation and inertial spacetime frame dragging. The general relativistic Godel-Obukhov spacetime metric which incorporates expansion and rotation of the Universe is used to evaluate this force. This metric is expressed here in spherical comoving coordinates. Through a cosmic time evolution, it is shown that cosmic acceleration is expected when the magnitude of the radial repulsive GM force exceeds that of the familiar or usual attractive gravitational "gravitoelectric" (GE) force: associated with just cosmic matter and spacetime war** (or curvature). In general, this phenomenon of cosmic accelerated expansion appears to have occurred twice in the history of the Universe: the inflationary phase and the present-day acceleration phase. It is suggested in this model that the two phases may or may not be related. The cosmological model presented here is described in the context of Einstein's Theory of General Relativity in Riemann-Cartan spacetime (the "generalized" Einstein- Cartan theory of gravity), which includes cosmic rotation, its effect of spacetime torsion, and it being considered as an intrinsic part of gravity. Also, an associated derived analytical expression for the cosmic primordial magnetic field is presented. Evolving this magnetic field over cosmic time shows it to be consistent with theory and observations. In addition, it appears that the spin density of cosmic matter couples this magnetic field to the GM field, and also couples this magnetic field to the GE field.
△ Less
Submitted 23 January, 2018; v1 submitted 26 September, 2011;
originally announced September 2011.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Investigation of Gd3N@C2n (40 < n < 44) family by Raman and inelastic electron tunneling spectroscopy
Authors:
Brian G. Burke,
Jack Chan,
Keith A. Williams,
Jiechao Ge,
Chunying Shu,
Wujun Fu,
Harry C. Dorn,
James G. Kushmerick,
Alexander A. Puretzky,
David B. Geohegan
Abstract:
The structure and vibrational spectrum of Gd3N@C80 is studied through Raman and inelastic electron tunneling spectroscopy (IETS) as well as density functional theory (DFT) and universal force field (UFF) calculations. Hindered rotations, shown by both theory and experiment, indicate the formation of a Gd3N-C80 bond which reduces the ideal icosahedral symmetry of the C80 cage. The vibrational mod…
▽ More
The structure and vibrational spectrum of Gd3N@C80 is studied through Raman and inelastic electron tunneling spectroscopy (IETS) as well as density functional theory (DFT) and universal force field (UFF) calculations. Hindered rotations, shown by both theory and experiment, indicate the formation of a Gd3N-C80 bond which reduces the ideal icosahedral symmetry of the C80 cage. The vibrational modes involving the movement of the encapsulated species are a fingerprint of the interaction between the fullerene cage and the core complex. We present Raman data for the Gd3N@C2n (40 < n < 44) family as well as Y3N@C80, Lu3N@C80, and Y3N@C88 for comparison. Conductance measurements have been performed on Gd3N@C80 and reveal a Kondo effect similar to that observed in C60.
△ Less
Submitted 27 October, 2009;
originally announced October 2009.
-
Raman study of Fano interference in p-type doped silicon
Authors:
Brian G. Burke,
Jack Chan,
Keith A. Williams,
Zili Wu,
Alexander A. Puretzky,
David B. Geohegan
Abstract:
As the silicon industry continues to push the limits of device dimensions, tools such as Raman spectroscopy are ideal to analyze and characterize the doped silicon channels. The effect of inter-valence band transitions on the zone center optical phonon in heavily p-type doped silicon is studied by Raman spectroscopy for a wide range of excitation wavelengths extending from the red (632.8 nm) int…
▽ More
As the silicon industry continues to push the limits of device dimensions, tools such as Raman spectroscopy are ideal to analyze and characterize the doped silicon channels. The effect of inter-valence band transitions on the zone center optical phonon in heavily p-type doped silicon is studied by Raman spectroscopy for a wide range of excitation wavelengths extending from the red (632.8 nm) into the ultra-violet (325 nm). The asymmetry in the one-phonon Raman lineshape is attributed to a Fano interference involving the overlap of a continuum of electronic excitations with a discrete phonon state. We identify a transition above and below the one-dimensional critical point (E = 3.4 eV) in the electronic excitation spectrum of silicon. The relationship between the anisotropic silicon band structure and the penetration depth is discussed in the context of possible device applications.
△ Less
Submitted 27 October, 2009;
originally announced October 2009.
-
High Resolution Map** of Phase Behavior in a Ternary Lipid Mixture: Do Lipid-Raft Phase Boundaries Depend on Sample-Prep Procedure?
Authors:
Jeffrey T. Buboltz,
Charles Bwalya,
Krystle Williams,
Matthew Schutzer
Abstract:
For some time now, we have been using a FRET-based strategy to make high-resolution studies of phase behavior in ternary lipid-raft membrane mixtures. Our FRET experiments can be carried out on ordinary, polydisperse multilamellar vesicle suspensions, so we are able to prepare our samples according to a procedure that was designed specifically to guard against artifactual phase separation. In so…
▽ More
For some time now, we have been using a FRET-based strategy to make high-resolution studies of phase behavior in ternary lipid-raft membrane mixtures. Our FRET experiments can be carried out on ordinary, polydisperse multilamellar vesicle suspensions, so we are able to prepare our samples according to a procedure that was designed specifically to guard against artifactual phase separation. In some respects (i.e., the number and nature of two-phase regions observed), our phase diagrams are consistent with previously published reports. However, in other respects (i.e., overall size of miscibility gaps, phase boundary locations and their dependence on temperature) there are clear differences. Here we present FRET data taken in DOPC/DPPC/Cholesterol mixtures at 25.0, 35.0 and 45.0oC. Comparisons between our results and previously reported phase boundaries suggest that lipid-raft mixtures may be particularly susceptible to demixing effects during sample preparation.
△ Less
Submitted 14 August, 2007; v1 submitted 11 June, 2007;
originally announced June 2007.
-
On the simulation of enzymatic digest patterns: the fragmentation of oligomeric and polymeric galacturonides by endo-polygalacturonase II
Authors:
Jonathan J Hunt,
Randall G Cameron,
Martin A. K. Williams
Abstract:
A simulation methodology for predicting the time-course of enzymatic digestions is described. The model is based solely on the enzyme's subsite architecture and concomitant binding energies. This allows subsite binding energies to be used to predict the evolution of the relative amounts of different products during the digestion of arbitrary mixtures of oligomeric or polymeric substrates. The me…
▽ More
A simulation methodology for predicting the time-course of enzymatic digestions is described. The model is based solely on the enzyme's subsite architecture and concomitant binding energies. This allows subsite binding energies to be used to predict the evolution of the relative amounts of different products during the digestion of arbitrary mixtures of oligomeric or polymeric substrates. The methodology has been specifically demonstrated by studying the fragmentation of a population of oligogalacturonides of varying degrees of polymerization, when digested by endo-polygalacturonase II (endo-PG II) from Aspergillus niger.
△ Less
Submitted 1 September, 2006;
originally announced September 2006.
-
A Word from a Black Female Relativistic Astrophysicist: Setting the Record Straight on Black Holes
Authors:
Reva Kay Williams
Abstract:
This Letter is written to clear up a situation, and hopefully we will learn something from it: scientifically and morally. Herein is presented a true ``historical'' scenario of events, that led to my being the first person (Williams 1991) to successfully work out the Penrose mechanism in four-dimensions (three-space momenta and energy). Before working out a solution to the Penrose mechanism: to…
▽ More
This Letter is written to clear up a situation, and hopefully we will learn something from it: scientifically and morally. Herein is presented a true ``historical'' scenario of events, that led to my being the first person (Williams 1991) to successfully work out the Penrose mechanism in four-dimensions (three-space momenta and energy). Before working out a solution to the Penrose mechanism: to extract energy from a rotating black hole, the Penrose mechanism (since first proposed by Roger Penrose in 1969) had been attempted by scientists over the world for nearly two decades, with little success, although making some progress. In the Penrose analysis of Williams (1991, 1995) details of the behavior of efficient Penrose relativistic scattering processes in the ergosphere are described. The reason a solution eluded other scientists before me is that there was very little known about orbits inside the ergosphere, where space and time are no longer separable, as measured by an observer at infinity (i.e., far away from the Kerr black hole). In this Letter, I describe how analytic derivations of the conserved energy and azimuthal angular momentum of particle orbits not confined to the equatorial plane allowed me to succeed where others, whose ``shoulders'' I stood on, had failed. Also, I will mention some well known scientists in the astrophysics community by name, as I discuss their involvement, and outline the facts behind an author feeling the need to set the record straight.
△ Less
Submitted 6 April, 2004;
originally announced April 2004.
