-
Enhanced pedestal transport driven by edge collisionality on Alcator C-Mod and its role in regulating H-mode pedestal gradients
Authors:
M. A. Miller,
J. W. Hughes,
A. M. Rosenthal,
S. Mordijck,
R. Reksoatmodjo,
M. Wigram,
J. Dunsmore,
F. Sciortino,
R. S. Wilcox,
T. Odstrčil
Abstract:
Experimental measurements of plasma and neutral profiles across the pedestal are used in conjunction with 2D edge modeling to examine pedestal stiffness in Alcator C-Mod H-mode plasmas. Experiments on Alcator C-Mod observed pedestal degradation and loss in confinement below a critical value of net power crossing the separatrix, $P_\mathrm{net} = P_\mathrm{net}^\mathrm{crit} \approx 2.3$ MW. New an…
▽ More
Experimental measurements of plasma and neutral profiles across the pedestal are used in conjunction with 2D edge modeling to examine pedestal stiffness in Alcator C-Mod H-mode plasmas. Experiments on Alcator C-Mod observed pedestal degradation and loss in confinement below a critical value of net power crossing the separatrix, $P_\mathrm{net} = P_\mathrm{net}^\mathrm{crit} \approx 2.3$ MW. New analysis of ionization and particle flux profiles reveal saturation of the pedestal electron density, $n_{e}^\mathrm{ped}$ despite continuous increases in ionization throughout the pedestal, inversely related to $P_\mathrm{net}$. A limit to the pedestal $\nabla n_{e}$ emerges as the particle flux, $Γ_{D}$ continues to grow, implying increases in the effective particle diffusivity, $D_\mathrm{eff}$. This is well-correlated with the separatrix collisionality, $ν^{*}_\mathrm{sep}$ and a turbulence control parameter, $α_{t}$, implying a possible transition in type of turbulence. The transition is well correlated with the experimentally observed value of $P_\mathrm{net}^\mathrm{crit}$. SOLPS-ITER modeling is performed for select discharges from the power scan, constrained with experimental electron and neutral densities, measured at the outer midplane. The modeling confirms general growth in $D_\mathrm{eff}$, consistent with experimental findings, and additionally suggests even larger growth in $χ_{e}$ at the same $P_\mathrm{net}^\mathrm{crit}$.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Particle control via cryopum** and its impact on the edge plasma profiles of Alcator C-Mod
Authors:
M. A. Miller,
J. W. Hughes,
S. Mordijck,
M. Wigram,
J. Dunsmore,
R. Reksoatmodjo,
R. S. Wilcox
Abstract:
At the high $n_{e}$ proposed for high-field fusion reactors, it is uncertain whether ionization, as opposed to plasma transport, will be most influential in determining $n_{e}$ at the pedestal and separatrix. A database of Alcator C-Mod discharges is analyzed to evaluate the impact of source modification via cryopum**. The database contains similarly-shaped H-modes at fixed $I_{p} =$ 0.8 MA and…
▽ More
At the high $n_{e}$ proposed for high-field fusion reactors, it is uncertain whether ionization, as opposed to plasma transport, will be most influential in determining $n_{e}$ at the pedestal and separatrix. A database of Alcator C-Mod discharges is analyzed to evaluate the impact of source modification via cryopum**. The database contains similarly-shaped H-modes at fixed $I_{p} =$ 0.8 MA and $B_{t} =$ 5.4 T, spanning a large range in $P_\mathrm{net}$ and ionization. Measurements from an edge Thomson Scattering system are combined with those from a midplane-viewing Ly$_α$ camera to evaluate changes to $n_{e}$ and $T_{e}$ in response to changes to ionization rates, $S_\mathrm{ion}$. $n_{e}^\mathrm{sep}$ and $T_{e}^\mathrm{ped}$ are found to be most sensitive to changes to $S_\mathrm{ion}^\mathrm{sep}$, as opposed to $n_{e}^\mathrm{ped}$ and $T_{e}^\mathrm{sep}$. Dimensionless quantities, namely $α_\mathrm{MHD}$ and $ν^{*}$, are found to regulate attainable pedestal values. Select discharges at different values of $P_\mathrm{net}$ and in different pum** configurations are analyzed further using SOLPS-ITER. It is determined that changes to plasma transport coefficients are required to self-consistently model both plasma and neutral edge dynamics. Pum** is found to modify the poloidal distribution of atomic neutral density, $n_{0}$, along the separatrix, increasing $n_{0}$ at the active X-point. Opaqueness to neutrals from high $n_{e}$ in the divertor is found to play a role in mediating neutral penetration lengths and hence, the poloidal distribution of neutrals along the separatrix. Pumped discharges thus require a larger particle diffusion coefficient than that inferred purely from 1D experimental profiles at the outer midplane.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection
Authors:
Florian Effenberg,
Shota Abe,
Gregory Sinclair,
Tyler Abrams,
Alessandro Bortolon,
William R. Wampler,
Florian M. Laggner,
Dmitry L. Rudakov,
Igor Bykov,
Charles J. Lasnier,
David Mauzey,
Alexander Nagy,
Raffi Nazikian,
Filippo Scotti,
Huiqian Wang,
Robert S. Wilcox,
the DIII-D Team
Abstract:
Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities…
▽ More
Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from $3.9-7.5\times10^{19}$ m$^{-3}$ and input powers ranging from $5.5-9$ MW. The small Si pellets were delivered with the impurity granule injector (IGI) at frequencies ranging from 4-16 Hz corresponding to mass flow rates of $5-19$ mg/s ($1-4.2\times10^{20}$ Si/s) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system (DiMES) to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO$_2$ is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least $0.4-1.2$ nm thickness have been deposited at $0.4-0.7$ nm/s. The technique is estimated to coat a surface area of at least 0.94 m$^2$ on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation.
△ Less
Submitted 9 August, 2023; v1 submitted 8 April, 2023;
originally announced April 2023.
-
Growing Neoclassical Tearing Modes Seeded via Transient-Induced-Multimode Interactions
Authors:
E. C. Howell,
J. R. King,
J. D. Callen,
R. J. La Haye,
R. S. Wilcox,
S. E. Kruger
Abstract:
Nonlinear extended MHD simulations demonstrating seeding of neoclassical tearing modes (NTMs) via MHD-transient-induced multimode interactions are presented. Simulations of NTMs are enabled by two recent NIMROD code developments: the implementation of heuristic neoclassical stresses and the application of transient magnetic perturbations (MPs) at the boundary. NTMs are driven unstable by the inher…
▽ More
Nonlinear extended MHD simulations demonstrating seeding of neoclassical tearing modes (NTMs) via MHD-transient-induced multimode interactions are presented. Simulations of NTMs are enabled by two recent NIMROD code developments: the implementation of heuristic neoclassical stresses and the application of transient magnetic perturbations (MPs) at the boundary. NTMs are driven unstable by the inherently pressure driven kinetic bootstrap current, which arises due to collisional viscosity between passing and trapped electrons. These simulations use heuristic closures that model the neoclassical electron and ion stresses. NTM growth requires a seed island, which is generated by a transiently applied MP in simulations. The capability is demonstrated using kinetic-based reconstructions with flow of a DIII-D ITER Baseline Scenario discharge [R.J. La Haye, et al., Proceedings IAEA FEC 2020]. The applied MP seeds a 2/1 NTM that grows in two phases: a slow growth phase followed by a faster robust growth phase like that observed experimentally. Additionally, an evolving sequence of higher order core modes are excited at first. Power transfer analysis shows that nonlinear interactions between the core modes and the 2/1 helps drive the initial slow growth. Once the induced 2/1 magnetic island reaches a critical width, the NTM transitions to faster robust growth which is well described by the nonlinear modified Rutherford equation. This work highlights the role of nonlinear mode coupling in seeding NTMs.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges
Authors:
T. Abrams,
S. Bringuier,
D. M. Thomas,
G. Sinclair,
S. Gonderman,
L. Holland,
D. L. Rudakov,
R. S. Wilcox,
E. A. Unterberg,
F. Scotti
Abstract:
Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bo…
▽ More
Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bombardment due to more efficient physical and chemical sputtering of C relative to Si. Silicon erosion from SiC thereby occurs primarily from sputtering of the enriched Si layer, rather than directly from the SiC itself. SiC coatings on ATJ graphite, manufactured via chemical vapor deposition, were exposed to repeated H-mode plasma discharges in the DIII-D tokamak to test this model. The qualitative trends from analytic modeling are reproduced by the experimental measurements, obtained via spectroscopic inference using the S/XB method. Quantitatively the model slightly under-predicts measured erosion rates, which is attributed to uncertainties in the ion impact angle distribution, as well as the effect of edge-localized modes. After exposure, minimal changes to the macroscopic or microscopic surface morphology of the SiC coatings were observed. Compositional analysis reveals Si enrichment of about 10%, in line with expectations from the erosion model. Extrapolating to a DEMO-type device, an order-of-magnitude decrease in impurity sourcing, and up to a factor of 2 decrease in impurity radiation, is expected with SiC walls, relative to graphite, if low C plasma impurity content can be achieved. These favorable erosion properties motivate further investigations of SiC as a low-Z, non-metallic PFM.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
