-
On-Chip Backward Stimulated Brillouin Scattering in Lithium Niobate Waveguides
Authors:
Caique C. Rodrigues,
Nick J. Schilder,
Roberto O. Zurita,
Letícia S. Magalhães,
Amirhassan Shams-Ansari,
Thiago P. M. Alegre,
Marko Lončar,
Gustavo S. Wiederhecker
Abstract:
We report on the first experimental demonstration of backward stimulated Brillouin scattering (SBS) in Lithium Niobate on Insulator (LNOI) waveguides. Performing polarization-dependent pump-probe experiments, we successfully quantified both intramodal and intermodal scattering among fundamental modes, showcasing substantial gains up to $G_{B}=$10m$^{-1}$W$^{-1}$. Such large gains on simple wavegui…
▽ More
We report on the first experimental demonstration of backward stimulated Brillouin scattering (SBS) in Lithium Niobate on Insulator (LNOI) waveguides. Performing polarization-dependent pump-probe experiments, we successfully quantified both intramodal and intermodal scattering among fundamental modes, showcasing substantial gains up to $G_{B}=$10m$^{-1}$W$^{-1}$. Such large gains on simple waveguides open a pathway for unlocking novel opto-electro-mechanical phenomena within the LNOI platform.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Synchronization of silicon thermal-free-carrier oscillators
Authors:
Gustavo de O. Luiz,
Caique C. Rodrigues,
Thiago P. Mayer Alegre,
Gustavo S. Wiederhecker
Abstract:
Recent exploration of collective phenomena in oscillator arrays has highlighted its potential for accessing a range of physical phenomena, from fundamental quantum many-body dynamics to the solution of practical optimization problems using photonic Ising machines. Spontaneous oscillations often arise in these oscillator arrays as an imbalance between gain and loss. Due to coupling between array in…
▽ More
Recent exploration of collective phenomena in oscillator arrays has highlighted its potential for accessing a range of physical phenomena, from fundamental quantum many-body dynamics to the solution of practical optimization problems using photonic Ising machines. Spontaneous oscillations often arise in these oscillator arrays as an imbalance between gain and loss. Due to coupling between array individuals, the spontaneous oscillation is constrained and lead to interesting collective behavior, such as synchronized oscillations in optomechanical oscillator arrays, ferromagnetic-like coupling in delay-coupled optical parametric oscillators and binary phase states in coupled laser arrays. A key aspect of arrays is not only the coupling between its individuals but also their compliance towards neighbor stimuli. One self-sustaining photonic oscillator that can be readily implemented in a scalable foundry-based technology is based on the interaction of free-carriers, temperature and optical field of a resonant silicon photonic microcavity. Here we demonstrate that these silicon thermal-free-carrier oscillators are extremely compliant to external excitation and can be synchronized up to their 16$^\text{th}$ harmonic using a weak seed. Exploring this unprecedented compliance to external stimuli, we also demonstrate robust synchronization between two thermal free carrier oscillators.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Stimulated Brillouin scattering by surface acoustic waves in lithium niobate waveguides
Authors:
Caique C. Rodrigues,
Roberto O. Zurita,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
We numerically demonstrate that Lithium Niobate on Insulator (LNOI) waveguides may support confined short-wavelength surface acoustic waves that interact strongly with optical fields through backward stimulated Brillouin scattering in both $Z$ and $X$-cut orientation. We conduct fully anisotropic simulations that consider not only moving boundary and photoelastic forces, but also roto-optic forces…
▽ More
We numerically demonstrate that Lithium Niobate on Insulator (LNOI) waveguides may support confined short-wavelength surface acoustic waves that interact strongly with optical fields through backward stimulated Brillouin scattering in both $Z$ and $X$-cut orientation. We conduct fully anisotropic simulations that consider not only moving boundary and photoelastic forces, but also roto-optic forces for the Brillouin interaction. Our results indicate that photoelasticity dominates the Brillouin gain and can reach as high as $G_{B}/Q_{m}$ = 0.43 W$^{-1}$m$^{-1}$ in standard ridge waveguides
△ Less
Submitted 7 March, 2023; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Dissipative Optomechanics in High-Frequency Nanomechanical Resonators
Authors:
André G. Primo,
Pedro V. Pinho,
Rodrigo Benevides,
Simon Gröblacher,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
The coherent transduction of information between microwave and optical domains is a fundamental building block for future quantum networks. A promising way to bridge these widely different frequencies is using high-frequency nanomechanical resonators interacting with low-loss optical modes. State-of-the-art optomechanical devices rely on purely dispersive interactions that are enhanced by a large…
▽ More
The coherent transduction of information between microwave and optical domains is a fundamental building block for future quantum networks. A promising way to bridge these widely different frequencies is using high-frequency nanomechanical resonators interacting with low-loss optical modes. State-of-the-art optomechanical devices rely on purely dispersive interactions that are enhanced by a large photon population in the cavity. Additionally, one could use dissipative optomechanics, where photons can be scattered directly from a waveguide into a resonator hence increasing the degree of control of the acousto-optic interplay. Hitherto, such dissipative optomechanical interaction was only demonstrated at low mechanical frequencies, precluding prominent applications such as the quantum state transfer between photonic and phononic domains. Here, we show the first dissipative optomechanical system operating in the sideband-resolved regime, where the mechanical frequency is larger than the optical linewidth. Exploring this unprecedented regime, we demonstrate the impact of dissipative optomechanical coupling in resha** both mechanical and optical spectra. Our figures represent a two-order-of-magnitude leap in the mechanical frequency and a tenfold increase in the dissipative optomechanical coupling rate compared to previous works. Further advances could enable the individual addressing of mechanical modes and help mitigate optical nonlinearities and absorption in optomechanical devices.
△ Less
Submitted 1 September, 2023; v1 submitted 29 December, 2022;
originally announced December 2022.
-
Third-harmonic generation in silica wedge resonators
Authors:
Jorge H. Soares,
Laís Fujii Dos Santos,
Felipe G. S. Santos,
Marvyn Inga,
Yovanny A. V. Espinel,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Whispering-gallery-mode microcavities are known to have high optical quality factor, making them suitable for nonlinear optical interactions. Here, third-harmonic generation is observed using a relatively small radius wedge silicon oxide optical microcavity. The small radii wedge microdisks can be dispersion-tailored to obtain either normal or anomalous group velocity dispersion. In our case, we o…
▽ More
Whispering-gallery-mode microcavities are known to have high optical quality factor, making them suitable for nonlinear optical interactions. Here, third-harmonic generation is observed using a relatively small radius wedge silicon oxide optical microcavity. The small radii wedge microdisks can be dispersion-tailored to obtain either normal or anomalous group velocity dispersion. In our case, we operate in the normal dispersion regime preventing frequency comb generation by suppressing infrared cascading four-wave mixing. This allows for a clean third harmonic generation at phase-matched visible optical modes. Tunability of the third-harmonic emission is obtained due to a combination of the thermo-optical and Kerr effects. An additional thermal control of the phase matching condition allows for optimizing third-harmonic generation, and agreement between this process and couple-mode theory is demonstrated.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Silicon anisotropy in a bi-dimensional optomechanical cavity
Authors:
Cauê M. Kersul,
Rodrigo Benevides,
Flávio Moraes,
Gabriel H. M. de Aguiar,
Andreas Wallucks,
Simon Gröblacher,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
In this work, we study the effects of mechanical anisotropy in a 2D optomechanical crystal geometry. We fabricate and measure devices with different orientations, showing the dependence of the mechanical spectrum and the optomechanical coupling with the relative angle of the device to the crystallography directions of silicon. Our results show that the device orientation strongly affects its mecha…
▽ More
In this work, we study the effects of mechanical anisotropy in a 2D optomechanical crystal geometry. We fabricate and measure devices with different orientations, showing the dependence of the mechanical spectrum and the optomechanical coupling with the relative angle of the device to the crystallography directions of silicon. Our results show that the device orientation strongly affects its mechanical band structure, which makes the devices more susceptible to fabrication imperfections. Finally, we show that our device is compatible with cryogenic measurements reaching ground state occupancy of 0.2 phonons at mK temperature.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Optimization of diamond optomechanical crystal cavities
Authors:
Flavio Moraes,
Gabriel H. M. de Aguiar,
Emerson G. de Melo,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to…
▽ More
Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to produce diamond optomechanical crystal (OMC) cavities operating at the high-cooperativity regime (close to unity) at room temperature.
△ Less
Submitted 3 July, 2022;
originally announced July 2022.
-
Enantioselective optical forces in gain-functionalized single core-shell chiral nanoparticles
Authors:
R. Ali,
F. A. Pinheiro,
R. S. Dutra,
T. P. Mayer Alegre,
G. S. Wiederhecker
Abstract:
We propose a gain-assisted enantioselective scheme in dye-doped chiral particles, demonstrating optical pulling and pushing forces that can be tuned using externally controllable parameters. By controlling the concentration of dye molecules and pum** rate, we achieve all-optical chiral resolution of racemic mixtures and enantioselection of small dipolar chiral particles without relying on interf…
▽ More
We propose a gain-assisted enantioselective scheme in dye-doped chiral particles, demonstrating optical pulling and pushing forces that can be tuned using externally controllable parameters. By controlling the concentration of dye molecules and pum** rate, we achieve all-optical chiral resolution of racemic mixtures and enantioselection of small dipolar chiral particles without relying on interference. This scheme is applicable to both lossless and lossy plasmonic chiral particles, making it a promising approach for chiral sensing, drug discovery, and molecular separation.
△ Less
Submitted 19 April, 2023; v1 submitted 21 March, 2022;
originally announced March 2022.
-
Optomechanical Synchronization across Multi-Octaves Frequency Spans
Authors:
Caique C. Rodrigues,
Cauê M. Kersul,
André G. Primo,
Michal Lipson,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
Experimental exploration of synchronization in scalable oscillator micro systems has unfolded a deeper understanding of networks, collective phenomena, and signal processing. Cavity optomechanical devices have played an important role in this scenario, with the perspective of bridging optical and radio frequencies through nonlinear classical and quantum synchronization concepts. In its simplest fo…
▽ More
Experimental exploration of synchronization in scalable oscillator micro systems has unfolded a deeper understanding of networks, collective phenomena, and signal processing. Cavity optomechanical devices have played an important role in this scenario, with the perspective of bridging optical and radio frequencies through nonlinear classical and quantum synchronization concepts. In its simplest form, synchronization occurs when an oscillator is entrained by a signal with frequency nearby the oscillator's tone, and becomes increasingly challenging as their frequency detuning increases. Here, we experimentally demonstrate entrainment of a silicon-nitride optomechanical oscillator driven up to the fourth harmonic of its 32 MHz fundamental frequency. Exploring this effect, we also experimentally demonstrate for the first time a purely optomechanical RF frequency divider, where we performed frequency division up to a 4:1 ratio, i.e., from 128 MHz to 32 MHz. Further developments could harness these effects towards frequency synthesizers, phase-sensitive amplification and nonlinear sensing.
△ Less
Submitted 24 September, 2021; v1 submitted 4 May, 2021;
originally announced May 2021.
-
Intermodal Brillouin scattering in solid-core photonic crystal fibers
Authors:
Paulo F. Jarschel,
Erick Lamilla,
Yovanny A. V. Espinel,
Ivan Aldaya,
Julian L. Pita,
Andres Gil-Molina,
Gustavo S. Wiederhecker,
Paulo Dainese
Abstract:
We investigate intermodal forward Brillouin scattering in a solid-core PCF, demonstrating efficient power conversion between the HE11 and HE21 modes, with a maximum gain coefficient of 21.4/W/km. By exploring mechanical modes of different symmetries, we observe both polarization-dependent and polarization-independent intermodal Brillouin interaction. Finally, we discuss the role of squeeze film ai…
▽ More
We investigate intermodal forward Brillouin scattering in a solid-core PCF, demonstrating efficient power conversion between the HE11 and HE21 modes, with a maximum gain coefficient of 21.4/W/km. By exploring mechanical modes of different symmetries, we observe both polarization-dependent and polarization-independent intermodal Brillouin interaction. Finally, we discuss the role of squeeze film air dam** and leakage mechanisms, ultimately critical to the engineering of PCF structures with enhanced interaction between high order optical modes through flexural mechanical modes.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Designing of strongly confined short-wave Brillouin phonons in silicon waveguide periodic lattices
Authors:
Roberto O. Zurita,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
We propose a feasible waveguide design optimized for harnessing Stimulated Brillouin Scattering with long-lived phonons. The design consists of a fully suspended ridge waveguide surrounded by a 1D phononic crystal that mitigates losses to the substrate while providing the needed homogeneity for the build-up of the optomechanical interaction. The coupling factor of these structures was calculated t…
▽ More
We propose a feasible waveguide design optimized for harnessing Stimulated Brillouin Scattering with long-lived phonons. The design consists of a fully suspended ridge waveguide surrounded by a 1D phononic crystal that mitigates losses to the substrate while providing the needed homogeneity for the build-up of the optomechanical interaction. The coupling factor of these structures was calculated to be 0.54 (W.m)$^{-1}$ for intramodal backward Brillouin scattering with its fundamental TE-like mode and 4.5(W.m)$^{-1}$ for intramodal forward Brillouin scattering. The addition of the phononic crystal provides a 30 dB attenuation of the mechanical displacement after only five unitary cells, possibly leading to a regime where the acoustic losses are only limited by fabrication. As a result, the total Brillouin gain, which is proportional to the product of the coupling and acoustic quality factors, is nominally equal to the idealized fully suspended waveguide.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Alumina coating for dispersion management in ultra-high Q microresonators
Authors:
Marvyn Inga,
Laís Fujii,
José Maria C. da Silva Filho,
João Henrique Q. Palhares,
Andre S. Ferlauto,
Francisco C. Marques,
Thiago P. Mayer Alegre,
Gustavo S. Wiederhecker
Abstract:
Silica optical microspheres often exhibit ultra-high quality factors, yet, their group velocity dispersion, which is crucial for nonlinear optics applications, can only be coarsely tuned. We experimentally demonstrate that group-velocity dispersion of a silica microsphere can be engineered by coating it with conformal nanometric layers of alumina, yet preserving its ultra-high optical quality fact…
▽ More
Silica optical microspheres often exhibit ultra-high quality factors, yet, their group velocity dispersion, which is crucial for nonlinear optics applications, can only be coarsely tuned. We experimentally demonstrate that group-velocity dispersion of a silica microsphere can be engineered by coating it with conformal nanometric layers of alumina, yet preserving its ultra-high optical quality factors (\num{\sim e7}) at telecom wavelengths. Using the atomic layer deposition technique for the dielectric coating, which ensures nm-level thickness control, we not only achieve a fine dispersion tailoring but also maintain a low surface roughness and material absorption to ensure a low optical loss. Numerical simulations supporting our experimental results show that the alumina layer thickness is a promising technique for precise tuning of group-velocity dispersion. As an application we demonstrate the generation of Kerr optical frequency combs, showing that the alumina coatings can also sustain the high optical intensities necessary for nonlinear optical phenomena.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Accurate modeling and characterization of photothermal forces in optomechanics
Authors:
André G. Primo,
Cauê M. Kersul,
Rodrigo Benevides,
Natália C. Carvalho,
Michaël Ménard,
Newton C. Frateschi,
Pierre-Louis de Assis,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experi…
▽ More
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experimental tests on GaAs microdisks cavities and obtain striking agreement with our framework, revealing the importance of considering surface photothermal forces and the effects of multiple thermal modes in microphotonic devices.
△ Less
Submitted 7 July, 2021; v1 submitted 22 August, 2020;
originally announced August 2020.
-
High-Frequency GaAs Optomechanical Bullseye Resonator
Authors:
N. C. Carvalho,
R. Benevides,
M. Ménard,
G. S. Wiederhecker,
N. C. Frateschi,
T. P. Mayer Alegre
Abstract:
The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical res…
▽ More
The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical resonator with a ring-type bullseye geometry that is unprecedented in this platform. We measured mechanical modes up to 3.4 GHz with quality factors of 4000 (at 77 K) and optomechanical coupling rates up to 39 kHz at telecom wavelengths. Moreover, we investigated the material symmetry break due to elastic anisotropy and its impact on the mechanical mode spectrum. Finally, we assessed the temperature dependence of the mechanical losses and demonstrated the efficiency and anisotropy resilience of the bullseye anchor loss suppression, indicating that lower temperature operation may allow mechanical quality factors over $10^4$. Such characteristics are valuable for active optomechanics, coherent microwave-to-optics conversion via piezo-mechanics and other implementations of high-frequency oscillators in III-V materials.
△ Less
Submitted 23 October, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Quasinormal-mode perturbation theory for dissipative and dispersive optomechanics
Authors:
André G. Primo,
Natália C. Carvalho,
Cauê M. Kersul,
Newton C. Frateschi,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Despite the several novel features arising from the dissipative optomechanical coupling, such effect remains vastly unexplored due to the lack of a simple formalism that captures non-Hermiticity in optomechanical systems. In this Letter, we show that quasinormal-mode-based perturbation theory is capable of correctly predicting both dispersive and dissipative optomechanical couplings. We validate o…
▽ More
Despite the several novel features arising from the dissipative optomechanical coupling, such effect remains vastly unexplored due to the lack of a simple formalism that captures non-Hermiticity in optomechanical systems. In this Letter, we show that quasinormal-mode-based perturbation theory is capable of correctly predicting both dispersive and dissipative optomechanical couplings. We validate our model through simulations and also by comparison with experimental results reported in the literature. Finally, we apply this formalism to plasmonic systems, used for molecular optomechanics, where strong dissipative coupling signatures in the amplification of vibrational modes are observed.
△ Less
Submitted 5 October, 2020; v1 submitted 31 May, 2020;
originally announced June 2020.
-
Dispersion tailoring in wedge microcavities for Kerr comb generation
Authors:
Laís Fujii,
Marvyn Inga,
Jorge H. Soares,
Yovanny A. V. Espinel,
Thiago P. Mayer Alegre,
Gustavo. S. Wiederhecker
Abstract:
The sha** of group velocity dispersion in microresonators is an important component in the generation of wideband optical frequency combs. Small resonators - with tight bending radii - offer the large free-spectral range desirable for wide comb formation. However, the tighter bending usually limit comb formation as it enhances normal group velocity dispersion. We experimentally demonstrate that…
▽ More
The sha** of group velocity dispersion in microresonators is an important component in the generation of wideband optical frequency combs. Small resonators - with tight bending radii - offer the large free-spectral range desirable for wide comb formation. However, the tighter bending usually limit comb formation as it enhances normal group velocity dispersion. We experimentally demonstrate that engineering the sidewall angle of small-radius (100 $μ$m), 3 $μ$m-thick silica wedge microdisks enables dispersion tuning in both normal and anomalous regimes, without significantly affecting the free spectral range. A microdisk with wedge angle of $55^{\circ}$ (anomalous dispersion) is used to demonstrate a 300 nm bandwidth Kerr optical frequency comb.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Bright and Vivid Diffractive-Plasmonic Structural Colors
Authors:
Emerson G. Melo,
Ana L. A. Ribeiro,
Rodrigo S. Benevides,
Antonio A. G. V. Zuben,
Marcos V. P. Santos,
Alexandre A. Silva,
Gustavo S. Wiederhecker,
Thiago P. M. Alegre
Abstract:
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Cr…
▽ More
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Creating vivid color reflecting surfaces is still a major challenge and could revolutionize low power consumption image displays. Here we combine diffraction and plasmonic effects to design bright and vivid-color reflecting surfaces. The periodic reflection patterns are designed through genetic algorithm optimization and are defined in aluminum coated silicon chips.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Ar/Cl$_{2}$ etching of GaAs optomechanical microdisks fabricated with positive electroresist
Authors:
Rodrigo Benevides,
Michaël Ménard,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality…
▽ More
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality factors of $Q_\text{opt}>2\times 10^{5}$, among the largest already reported for dry-etching devices. The final devices are also shown to present high mechanical quality factors and an optomechanical vacuum coupling constant of $g_{0}=2π\times 13.6$ kHz enabling self-sustainable mechanical oscillations for an optical input power above $1$ mW.
△ Less
Submitted 15 September, 2019;
originally announced September 2019.
-
Ultrahigh-Q optomechanical crystals cavities fabricated on a CMOS foundry
Authors:
Rodrigo Benevides,
Felipe G. S. Santos,
Gustavo O. Luiz,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Photonic crystals use periodic structures to create forbidden frequency regions for optical wave propagation, that allow for the creation and integration of complex optical functions in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challengi…
▽ More
Photonic crystals use periodic structures to create forbidden frequency regions for optical wave propagation, that allow for the creation and integration of complex optical functions in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challenging design, these cavities are traditionally fabricated using dedicated high-resolution electron-beam lithography tools that are inherently slow, limiting this solution to small-scale applications or research. Here we show how to overcome this problem by using a deep-UV photolithography process to fabricate optomechanical crystals on a commercial CMOS foundry. We show that a careful design of the photonic crystals can withstand the limitations of the photolithography process, producing cavities with measured intrinsic optical quality factors as high as $Q_{i}=(1.21\pm0.02)\times10^{6}$. Optomechanical crystals are also created using phononic crystals to tightly confine the sound waves within the optical cavity that results in a measured vacuum optomechanical coupling rate of $g_{0}=2π\times(91\pm4)$ kHz. Efficient sideband cooling and amplification are also demonstrated since these cavities are in the resolved sideband regime. Further improvement in the design and fabrication process suggest that commercial foundry-based optomechanical cavities could be used for quantum ground-state cooling.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Efficient anchor loss suppression in coupled near-field optomechanical resonators
Authors:
Gustavo O. Luiz,
Felipe G. S. Santos,
Rodrigo S. Benevides,
Yovanny A. V. Espinel,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of low-loss optomechanical devices. In this work we rely on the coherent cancellation of mechanical radiation to demonstrate material and surface absorption limit…
▽ More
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of low-loss optomechanical devices. In this work we rely on the coherent cancellation of mechanical radiation to demonstrate material and surface absorption limited silicon near-field optomechanical resonators oscillating at tens of MHz. The effectiveness of our dissipation suppression scheme is investigated at room and cryogenic temperatures. While at room temperature we can reach a maximum quality factor of 7.61k ($fQ$-product of the order of $10^{11}$~Hz), at 22~K the quality factor increases to 37k, resulting in a $fQ$-product of $2\times10^{12}$~Hz.
△ Less
Submitted 2 October, 2017; v1 submitted 12 January, 2017;
originally announced January 2017.
-
Brillouin Optomechanics in Coupled Silicon Microcavities
Authors:
Yovanny A. V. Espinel,
Felipe G. S. Santos,
Gustavo O. Luiz,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
The simultaneous control of optical and mechanical waves has enabled a range of fundamental and technological breakthroughs, from the demonstration of ultra-stable frequency reference devices to the exploration of the quantum-classical boundaries in laser-cooling experiments. More recently, such an opto-mechanical interaction has been observed in integrated nano-waveguides and microcavities in the…
▽ More
The simultaneous control of optical and mechanical waves has enabled a range of fundamental and technological breakthroughs, from the demonstration of ultra-stable frequency reference devices to the exploration of the quantum-classical boundaries in laser-cooling experiments. More recently, such an opto-mechanical interaction has been observed in integrated nano-waveguides and microcavities in the Brillouin regime, where short-wavelength mechanical modes scatters light at several GHz. Here we engineer coupled optical microcavities spectra to enable a low threshold excitation of mechanical travelling-wave modes through backward stimulated Brillouin scattering. Exploring the backward scattering we propose microcavity designs supporting super high frequency modes ($\sim25$ GHz) an large optomechanical coupling rates ($g_0/2π\sim 50$ kHz).
△ Less
Submitted 29 September, 2016;
originally announced September 2016.
-
Modeling quasi-dark states with Temporal Coupled-Mode Theory
Authors:
Mario C. M. M. Souza,
Guilherme F. M. Rezende,
Luis A. M. Barea,
Gustavo S. Wiederhecker,
Newton C. Frateschi
Abstract:
Coupled resonators are commonly used to achieve tailored spectral responses and allow novel functionalities in a broad range of applications, from optical modulation and filtering in integrated photonic circuits to the study of nonlinear dynamics in arrays of resonators. The Temporal Coupled-Mode Theory (TCMT) provides a simple and general tool that is widely used to model these devices and has pr…
▽ More
Coupled resonators are commonly used to achieve tailored spectral responses and allow novel functionalities in a broad range of applications, from optical modulation and filtering in integrated photonic circuits to the study of nonlinear dynamics in arrays of resonators. The Temporal Coupled-Mode Theory (TCMT) provides a simple and general tool that is widely used to model these devices and has proved to yield very good results in many different systems of low-loss, weakly coupled resonators. Relying on TCMT to model coupled resonators might however be misleading in some circumstances due to the lumped-element nature of the model. In this article, we report an important limitation of TCMT related to the prediction of dark states. Studying a coupled system composed of three microring resonators, we demonstrate that TCMT predicts the existence of a dark state that is in disagreement with experimental observations and with the more general results obtained with the Transfer Matrix Method (TMM) and the Finite-Difference Time-Domain (FDTD) simulations. We identify the limitation in the TCMT model to be related to the mechanism of excitation/decay of the supermodes and we propose a correction that effectively reconciles the model with expected results. A comparison with TMM and FDTD allows to verify both steady-state and transient solutions of the modified-TCMT model. The proposed correction is derived from general considerations, energy conservation and the non-resonant power circulating in the system, therefore it provides good insight on how the TCMT model should be modified to eventually account for the same limitation in a different coupled-resonator design. Moreover, our discussion based on coupled microring resonators can be useful for other electromagnetic resonant systems due to the generality and far-reach of the TCMT formalism.
△ Less
Submitted 7 June, 2016;
originally announced June 2016.
-
Hybrid confinement of optical and mechanical modes in a bullseye optomechanical resonator
Authors:
Felipe G. S. Santos,
Yovanny A. V. Espinel,
Gustavo O. Luiz,
Rodrigo S. Benevides,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Optomechanical cavities have proven to be an exceptional tool to explore fundamental and technological aspects of the interaction between mechanical and optical waves. Such interactions strongly benefit from cavities with large optomechanical coupling, high mechanical and optical quality factors, and mechanical frequencies larger than the optical mode linewidth, the so called resolved sideband lim…
▽ More
Optomechanical cavities have proven to be an exceptional tool to explore fundamental and technological aspects of the interaction between mechanical and optical waves. Such interactions strongly benefit from cavities with large optomechanical coupling, high mechanical and optical quality factors, and mechanical frequencies larger than the optical mode linewidth, the so called resolved sideband limit. Here we demonstrate a novel optomechanical cavity based on a disk with a radial mechanical bandgap. This design confines light and mechanical waves through distinct physical mechanisms which allows for independent control of the mechanical and optical properties. Our device design is not limited by unique material properties and could be easily adapted to allow large optomechanical coupling and high mechanical quality factors with other promising materials. Finally, our demonstration is based on devices fabricated on a commercial silicon photonics facility, demonstrating that our approach can be easily scalable.
△ Less
Submitted 20 May, 2016;
originally announced May 2016.
-
Brillouin Scattering Self-Cancellation
Authors:
Omar Florez,
Paulo F. Jarschel,
Yovanny A. V. Espinel,
Cristiano M. B. Cordeiro,
Thiago P. Mayer Alegre,
Gustavo S. Wiederhecker,
Paulo Dainese
Abstract:
The interaction between light and acoustic phonons is strongly modified in sub-wavelength confinement, and has led to the demonstration and control of Brillouin scattering in photonic structures such as nano-scale optical waveguides and cavities. Besides the small optical mode volume, two physical mechanisms come into play simultaneously: a volume effect caused by the strain induced refractive ind…
▽ More
The interaction between light and acoustic phonons is strongly modified in sub-wavelength confinement, and has led to the demonstration and control of Brillouin scattering in photonic structures such as nano-scale optical waveguides and cavities. Besides the small optical mode volume, two physical mechanisms come into play simultaneously: a volume effect caused by the strain induced refractive index perturbation (known as photo-elasticity), and a surface effect caused by the shift of the optical boundaries due to mechanical vibrations. As a result proper material and structure engineering allows one to control each contribution individually. In this paper, we experimentally demonstrate the perfect cancellation of Brillouin scattering by engineering a silica nanowire with exactly opposing photo-elastic and moving-boundary effects. This demonstration provides clear experimental evidence that the interplay between the two mechanisms is a promising tool to precisely control the photon-phonon interaction, enhancing or suppressing it.
△ Less
Submitted 20 January, 2016;
originally announced January 2016.
-
Spectral Engineering with Coupled Microcavities: Active Control of Resonant Mode-Splitting
Authors:
Mario C. M. M. Souza,
Guilherme Rezende,
Luis A. M. Barea,
Antonio A. G. von Zuben,
Gustavo S. Wiederhecker,
Newton C. Frateschi
Abstract:
Optical mode-splitting is an efficient tool to shape and fine-tune the spectral response of resonant nanophotonic devices. The active control of mode-splitting, however, is either small or accompanied by undesired resonance shifts, often much larger than the resonance-splitting. We report a control mechanism that enables reconfigurable and widely tunable mode-splitting while efficiently mitigating…
▽ More
Optical mode-splitting is an efficient tool to shape and fine-tune the spectral response of resonant nanophotonic devices. The active control of mode-splitting, however, is either small or accompanied by undesired resonance shifts, often much larger than the resonance-splitting. We report a control mechanism that enables reconfigurable and widely tunable mode-splitting while efficiently mitigating undesired resonance shifts. This is achieved by actively controlling the excitation of counter-traveling modes in coupled resonators. The transition from a large splitting (80 GHz) to a single-notch resonance is demonstrated using low power microheaters (35 mW). We show that the spurious resonance-shift in our device is only limited by thermal crosstalk and resonance-shift-free splitting control may be achieved.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
-
Broadband Tuning of Optomechanical Cavities
Authors:
Gustavo S. Wiederhecker,
Sasikanth Manipatruni,
Sunwoo Lee,
Michal Lipson
Abstract:
We demonstrate broadband tuning of an optomechanical microcavity optical resonance by exploring the large optomechanical coupling of a double-wheel microcavity and its uniquely low mechanical stiffness. Using a pump laser with only 13 mW at telecom wavelengths we show tuning of the silicon nitride microcavity resonances over 32 nm. This corresponds to a tuning power efficiency of only 400 $μ$W/nm.…
▽ More
We demonstrate broadband tuning of an optomechanical microcavity optical resonance by exploring the large optomechanical coupling of a double-wheel microcavity and its uniquely low mechanical stiffness. Using a pump laser with only 13 mW at telecom wavelengths we show tuning of the silicon nitride microcavity resonances over 32 nm. This corresponds to a tuning power efficiency of only 400 $μ$W/nm. By choosing a relatively low optical Q resonance ($\approx$18,000) we prevent the cavity from reaching the regime of regenerative optomechanical oscillations. The static mechanical displacement induced by optical gradient forces is estimated to be as large as 60 nm.
△ Less
Submitted 26 January, 2011; v1 submitted 9 November, 2010;
originally announced November 2010.
-
Controlling photonic structures using optical forces
Authors:
Gustavo S. Wiederhecker,
Long Chen,
Alexander Gondarenko,
Michal Lipson
Abstract:
The downscaling of optical systems to the micro and nano-scale results in very compliant systems with nanogram-scale masses, which renders them susceptible to optical forces. Here we show a specially designed resonant structure for enabling efficient static control of the optical response with relatively weak repulsive and attractive optical forces. Using attractive gradient optical forces we de…
▽ More
The downscaling of optical systems to the micro and nano-scale results in very compliant systems with nanogram-scale masses, which renders them susceptible to optical forces. Here we show a specially designed resonant structure for enabling efficient static control of the optical response with relatively weak repulsive and attractive optical forces. Using attractive gradient optical forces we demonstrate a static mechanical deformation of up to 20 nanometers in the resonator structure. This deformation is enough to shift the optical resonances by roughly 80 optical linewidths.
△ Less
Submitted 23 June, 2009; v1 submitted 5 April, 2009;
originally announced April 2009.
-
Coherent Control of Ultra-High Frequency Acoustic Resonances in Photonic Crystal Fibers
Authors:
G. S. Wiederhecker,
A. Brenn,
H. L. Fragnito,
P. St. J. Russell
Abstract:
Ultra-high frequency acoustic resonances ($\backsim$2 GHz) trapped within the glass core ($\backsim$1 $μ$m diameter) of a photonic crystal fiber are selectively excited through electrostriction using laser pulses of duration 100 ps and energy 500 pJ. Using precisely timed sequences of such driving pulses, we achieve coherent control of the acoustic resonances by constructive or destructive inter…
▽ More
Ultra-high frequency acoustic resonances ($\backsim$2 GHz) trapped within the glass core ($\backsim$1 $μ$m diameter) of a photonic crystal fiber are selectively excited through electrostriction using laser pulses of duration 100 ps and energy 500 pJ. Using precisely timed sequences of such driving pulses, we achieve coherent control of the acoustic resonances by constructive or destructive interference, demonstrating both enhancement and suppression of the vibrations. A sequence of 27 resonantly-timed pulses provides a 100-fold increase in the amplitude of the vibrational mode. The results are explained and interpreted using a semi-analytical theory, and supported by precise numerical simulations of the complex light-matter interaction.
△ Less
Submitted 27 April, 2008; v1 submitted 28 November, 2007;
originally announced November 2007.
