-
Beam Measurements and Machine Learning at the CERN Large Hadron Collider
Authors:
P. Arpaia,
G. Azzopardi,
F. Blanc,
X. Buffat,
L. Coyle,
E. Fol,
F. Giordano,
M. Giovannozzi,
T. Pieloni,
R. Prevete,
S. Redaelli,
B. Salvachua,
B. Salvant,
M. Schenk,
M. Solfaroli Camillocci,
R. Tomás,
G. Valentino,
F. F. Van der Veken,
J. Wenninger
Abstract:
This paper presents a review of the recent Machine Learning activities carried out on beam measurements performed at the CERN Large Hadron Collider. This paper has been accepted for publication in IEEE Instrumentation and Measurement Magazine and in the published version no abstract is provided.
This paper presents a review of the recent Machine Learning activities carried out on beam measurements performed at the CERN Large Hadron Collider. This paper has been accepted for publication in IEEE Instrumentation and Measurement Magazine and in the published version no abstract is provided.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
Beam-based aperture measurements with movable collimator jaws as performance booster of the CERN Large Hadron Collider
Authors:
N. Fuster-Martínez,
R. W. Aßmann,
R. Bruce,
M. Giovannozzi,
P. Hermes,
A. Mereghetti,
D. Mirarchi,
S. Redaelli,
J. Wenninger
Abstract:
The beam aperture of a particle accelerator defines the clearance available for the circulating beams and is a parameter of paramount importance for the accelerator performance. At the CERN Large Hadron Collider (LHC), the knowledge and control of the available aperture is crucial because the nominal proton beams carry an energy of 362 MJ stored in a superconducting environment. Even a tiny fracti…
▽ More
The beam aperture of a particle accelerator defines the clearance available for the circulating beams and is a parameter of paramount importance for the accelerator performance. At the CERN Large Hadron Collider (LHC), the knowledge and control of the available aperture is crucial because the nominal proton beams carry an energy of 362 MJ stored in a superconducting environment. Even a tiny fraction of beam losses could quench the superconducting magnets or cause severe material damage. Furthermore, in a circular collider, the performance in terms of peak luminosity depends to a large extent on the aperture of the inner triplet quadrupoles, which are used to focus the beams at the interaction points. In the LHC, this aperture represents the smallest aperture at top-energy with squeezed beams and determines the maximum potential reach of the peak luminosity. Beam-based aperture measurements in these conditions are difficult and challenging. In this paper, we present different methods that have been developed over the years for precise beam-based aperture measurements in the LHC, highlighting applications and results that contributed to boost the operational LHC performance in Run 1 (2010-2013) and Run 2 (2015-2018).
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Storage Rings and Gravitational Waves: Summary and Outlook
Authors:
A. Berlin,
M. Brüggen,
O. Buchmueller,
P. Chen,
R. T. D'Agnolo,
R. Deng,
J. R. Ellis,
S. Ellis,
G. Franchetti,
A. Ivanov,
J. M. Jowett,
A. P. Kobushkin,
S. Y. Lee,
J. Liske,
K. Oide,
S. Rao,
J. Wenninger,
M. Wellenzohn,
M. Zanetti,
F. Zimmermann
Abstract:
We report some highlights from the ARIES APEC workshop on ``Storage Rings and Gravitational Waves'' (SRGW2021), held in virtual space from 2 February to 18 March 2021, and sketch a tentative landscape for using accelerators and associated technologies for the detection or generation of gravitational waves.
We report some highlights from the ARIES APEC workshop on ``Storage Rings and Gravitational Waves'' (SRGW2021), held in virtual space from 2 February to 18 March 2021, and sketch a tentative landscape for using accelerators and associated technologies for the detection or generation of gravitational waves.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
-
Machine learning for beam dynamics studies at the CERN Large Hadron Collider
Authors:
P. Arpaia,
G. Azzopardi,
F. Blanc,
G. Bregliozzi,
X. Buffat,
L. Coyle,
E. Fol,
F. Giordano,
M. Giovannozzi,
T. Pieloni,
R. Prevete,
S. Redaelli,
B. Salvachua,
B. Salvant,
M. Schenk,
M. Solfaroli Camillocci,
R. Tomàs,
G. Valentino,
F. F. Van der Veken,
J. Wenninger
Abstract:
Machine learning entails a broad range of techniques that have been widely used in Science and Engineering since decades. High-energy physics has also profited from the power of these tools for advanced analysis of colliders data. It is only up until recently that Machine Learning has started to be applied successfully in the domain of Accelerator Physics, which is testified by intense efforts dep…
▽ More
Machine learning entails a broad range of techniques that have been widely used in Science and Engineering since decades. High-energy physics has also profited from the power of these tools for advanced analysis of colliders data. It is only up until recently that Machine Learning has started to be applied successfully in the domain of Accelerator Physics, which is testified by intense efforts deployed in this domain by several laboratories worldwide. This is also the case of CERN, where recently focused efforts have been devoted to the application of Machine Learning techniques to beam dynamics studies at the Large Hadron Collider (LHC). This implies a wide spectrum of applications from beam measurements and machine performance optimisation to analysis of numerical data from tracking simulations of non-linear beam dynamics. In this paper, the LHC-related applications that are currently pursued are presented and discussed in detail, paying also attention to future developments.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Linear Imperfections
Authors:
Jörg Wenninger
Abstract:
This lecture gives an overview of the impacts on linear machine optics of machine imperfections due to incorrect field settings and misalignments. The effects of imperfections in dipole, quadrupole, and sextupole magnets are presented, along with beam observables and correction techniques that may be used to restore the nominal machine parameters. The main concepts of orbit correction are discusse…
▽ More
This lecture gives an overview of the impacts on linear machine optics of machine imperfections due to incorrect field settings and misalignments. The effects of imperfections in dipole, quadrupole, and sextupole magnets are presented, along with beam observables and correction techniques that may be used to restore the nominal machine parameters. The main concepts of orbit correction are discussed in detail, because the principles underlying those techniques can be used for other corrections.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Polarization and Centre-of-mass Energy Calibration at FCC-ee
Authors:
Alain Blondel,
Patrick Janot,
Jörg Wenninger,
Ralf Aßmann,
Sandra Aumon,
Paolo Azzurri,
Desmond P. Barber,
Michael Benedikt,
Anton V. Bogomyagkov,
Eliana Gianfelice-Wendt,
Dima El Kerchen,
Ivan A. Koop,
Mike Koratzinos,
Evgeni Levitchev,
Thibaut Lefevre,
Attilio Milanese,
Nickolai Muchnoi,
Sergey A. Nikitin,
Katsunobu Oide,
Emmanuel Perez,
Robert Rossmanith,
David C. Sagan,
Roberto Tenchini,
Tobias Tydecks,
Dmitry Shatilov
, et al. (3 additional authors not shown)
Abstract:
The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm…
▽ More
The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm) measurements of the W and Z masses and widths, as well as forward-backward asymmetries. To this effect the centre-of-mass energy distribution should be determined with the high precision. This document describes the capacity offered by FCC-ee, starting with transverse polarization of the beams around the Z pole and the W pair threshold. A running scheme based on regular measurements of the beam energy by resonant depolarization of pilot bunches, during physics data taking, is proposed. The design for polarization wigglers, polarimeter and depolarizer is outlined. The $e^\pm$ beam energies will be monitored with a relative precision of $10^{-6}$. The centre-of-mass energy is derived subject to further corrections, related to the beam acceleration, synchrotron radiation and beamstrahlung; these effects are identified and evaluated. Dimuon events $e^+e^- \to μ^+ μ^-$, recorded in the detectors, provide with great precision the beam crossing angle, the centre-of-mass energy spread, and the $e^+$ and $e^-$ energy difference. Monitoring methods to minimize absolute error and relative uncertainties are discussed. The impact on the physics measurements is given. A programme of further simulations, design, monitoring and R&D is outlined.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
-
FCC-ee: Your Questions Answered
Authors:
Alain Blondel,
Patrick Janot,
Niloufar Alipour Tehrani,
Patrizia Azzi,
Paolo Azzurri,
Nicola Bacchetta,
Michael Benedikt,
Freya Blekman,
Manuela Boscolo,
Mogens Dam,
Stefania De Curtis,
David d'Enterria,
John Ellis,
Gerardo Ganis,
Janusz Gluza,
Clément Helsens,
Staszek Jadach,
Mike Koratzinos,
Markus Klute,
Christos Leonidopoulos,
Elizabeth Locci,
Michelangelo Mangano,
Stéphane Monteil,
Katsunobu Oide,
Vitaly Okorokov
, et al. (7 additional authors not shown)
Abstract:
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 20…
▽ More
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 2020 of the European Strategy Group recommendations. This document will be regularly updated as more questions appear or new information becomes available.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
Opportunities in Machine Learning for Particle Accelerators
Authors:
Auralee Edelen,
Christopher Mayes,
Daniel Bowring,
Daniel Ratner,
Andreas Adelmann,
Rasmus Ischebeck,
Jochem Snuverink,
Ilya Agapov,
Raimund Kammering,
Jonathan Edelen,
Ivan Bazarov,
Gianluca Valentino,
Jorg Wenninger
Abstract:
Machine learning (ML) is a subfield of artificial intelligence. The term applies broadly to a collection of computational algorithms and techniques that train systems from raw data rather than a priori models. ML techniques are now technologically mature enough to be applied to particle accelerators, and we expect that ML will become an increasingly valuable tool to meet new demands for beam energ…
▽ More
Machine learning (ML) is a subfield of artificial intelligence. The term applies broadly to a collection of computational algorithms and techniques that train systems from raw data rather than a priori models. ML techniques are now technologically mature enough to be applied to particle accelerators, and we expect that ML will become an increasingly valuable tool to meet new demands for beam energy, brightness, and stability. The intent of this white paper is to provide a high-level introduction to problems in accelerator science and operation where incorporating ML-based approaches may provide significant benefit. We review ML techniques currently being investigated at particle accelerator facilities, and we place specific emphasis on active research efforts and promising exploratory results. We also identify new applications and discuss their feasibility, along with the required data and infrastructure strategies. We conclude with a set of guidelines and recommendations for laboratory managers and administrators, emphasizing the logistical and technological requirements for successfully adopting this technology. This white paper also serves as a summary of the discussion from a recent workshop held at SLAC on ML for particle accelerators.
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
Machine Protection, Interlocks and Availability
Authors:
A. Apollonio,
T. Baer,
K. Dahlerup-Petersen,
R. Denz,
I. Romera Ramirez,
R. Schmidt,
A. Siemko,
J. Wenninger,
D. Wollmann,
M. Zerlauth
Abstract:
Chapter 7 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 7 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Design of beam optics for the Future Circular Collider e+e- -collider rings
Authors:
K. Oide,
M. Aiba,
S. Aumon,
M. Benedikt,
A. Blondel,
A. Bogomyagkov,
M. Boscolo,
H. Burkhardt,
Y. Cai,
A. Doblhammer,
B. Haerer,
B. Holzer,
J. M. Jowett,
I. Koop,
M. Koratzinos,
E. Levichev,
L. Medina,
K. Ohmi,
Y. Papaphilippou,
P. Piminov,
D. Shatilov,
S. Sinyatkin,
M. Sullivan,
J. Wenninger,
U. Wienands
, et al. (2 additional authors not shown)
Abstract:
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromatici…
▽ More
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromaticity correction system without additional sextupoles, by reducing the strength of one of the two sextupoles for vertical chromatic correction at each side of the IP. So-called "tapering" of the magnets is applied, which scales all fields of the magnets according to the local beam energy to compensate for the effect of synchrotron radiation (SR) loss along the ring. An asymmetric layout near the interaction region reduces the critical energy of SR photons on the incoming side of the IP to values below 100 keV, while matching the geometry to the beam line of the FCC proton collider (FCC-hh) [2] as closely as possible. Sufficient transverse/longitudinal dynamic aperture (DA) has been obtained, including major dynamical effects, to assure an adequate beam lifetime in the presence of beamstrahlung and top-up injection. In particular, a momentum acceptance larger than +/-2% has been obtained, which is better than the momentum acceptance of typical collider rings by about a factor of 2. The effects of the detector solenoids including their compensation elements are taken into account as well as synchrotron radiation in all magnets. The optics presented in this paper is a step toward a full conceptual design for the collider. A number of issues have been identified for further study.
△ Less
Submitted 23 October, 2016;
originally announced October 2016.
-
Machine Protection and Operation for LHC
Authors:
J. Wenninger
Abstract:
Since 2010 the Large Hadron Collider (LHC) is the accelerator with the highest stored energy per beam, with a record of 140 MJ at a beam energy of 4 TeV, almost a factor of 50 higher than other accelerators. With such a high stored energy, machine protection aspects set the boundary conditions for operation during all phases of the machine cycle. Only the low-intensity commissioning beams can be c…
▽ More
Since 2010 the Large Hadron Collider (LHC) is the accelerator with the highest stored energy per beam, with a record of 140 MJ at a beam energy of 4 TeV, almost a factor of 50 higher than other accelerators. With such a high stored energy, machine protection aspects set the boundary conditions for operation during all phases of the machine cycle. Only the low-intensity commissioning beams can be considered as relatively safe. This document discusses the interplay of machine operation and machine protection at the LHC, from commissioning to regular operation.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.
-
Testing Beam-Induced Quench Levels of LHC Superconducting Magnets
Authors:
B. Auchmann,
T. Baer,
M. Bednarek,
G. Bellodi,
C. Bracco,
R. Bruce,
F. Cerutti,
V. Chetvertkova,
B. Dehning,
P. P. Granieri,
W. Hofle,
E. B. Holzer,
A. Lechner,
E. Nebot Del Busto,
A. Priebe,
S. Redaelli,
B. Salvachua,
M. Sapinski,
R. Schmidt,
N. Shetty,
E. Skordis,
M. Solfaroli,
J. Steckert,
D. Valuch,
A. Verweij
, et al. (3 additional authors not shown)
Abstract:
In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not…
▽ More
In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not been a single beam- induced quench during normal collider operation with stored beam. The conditions, however, are expected to become much more challenging after the long LHC shutdown. The magnets will be operating at near nominal currents, and in the presence of high energy and high intensity beams with a stored energy of up to 362 MJ per beam. In this paper we summarize our efforts to understand the quench levels of LHC superconducting magnets. We describe beam-loss events and dedicated experiments with beam, as well as the simulation methods used to reproduce the observable signals. The simulated energy deposition in the coils is compared to the quench levels predicted by electro-thermal models, thus allowing to validate and improve the models which are used to set beam-dump thresholds on beam-loss monitors for Run 2.
△ Less
Submitted 26 June, 2015; v1 submitted 18 February, 2015;
originally announced February 2015.
-
Baseline LHC machine parameters and configuration of the 2015 proton run
Authors:
R. Bruce,
G. Arduini,
S. Fartoukh,
M. Giovannozzi,
M. Lamont,
E. Metral,
T. Pieloni,
S. Redaelli,
J. Wenninger
Abstract:
This paper shows the baseline LHC machine parameters for the 2015 start-up. Many systems have been upgraded during LS1 and in 2015 the LHC will operate at a higher energy than before and with a tighter filling scheme. Therefore, the 2015 commissioning phase risks to be less smooth than in 2012. The proposed starting configuration puts the focus on feasibility rather than peak performance and inclu…
▽ More
This paper shows the baseline LHC machine parameters for the 2015 start-up. Many systems have been upgraded during LS1 and in 2015 the LHC will operate at a higher energy than before and with a tighter filling scheme. Therefore, the 2015 commissioning phase risks to be less smooth than in 2012. The proposed starting configuration puts the focus on feasibility rather than peak performance and includes margins for operational uncertainties. Instead, once beam experience and a better machine knowledge has been obtained, a push in $β^*$ and performance can be envisaged. In this paper, the focus is on collimation settings and reach in $β^*$---other parameters are covered in greater depth by other papers in these proceedings.
△ Less
Submitted 22 October, 2014;
originally announced October 2014.