-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Reduced-order modeling for parameterized PDEs via implicit neural representations
Authors:
Tianshu Wen,
Kook** Lee,
Youngsoo Choi
Abstract:
We present a new data-driven reduced-order modeling approach to efficiently solve parametrized partial differential equations (PDEs) for many-query problems. This work is inspired by the concept of implicit neural representation (INR), which models physics signals in a continuous manner and independent of spatial/temporal discretization. The proposed framework encodes PDE and utilizes a parametriz…
▽ More
We present a new data-driven reduced-order modeling approach to efficiently solve parametrized partial differential equations (PDEs) for many-query problems. This work is inspired by the concept of implicit neural representation (INR), which models physics signals in a continuous manner and independent of spatial/temporal discretization. The proposed framework encodes PDE and utilizes a parametrized neural ODE (PNODE) to learn latent dynamics characterized by multiple PDE parameters. PNODE can be inferred by a hypernetwork to reduce the potential difficulties in learning PNODE due to a complex multilayer perceptron (MLP). The framework uses an INR to decode the latent dynamics and reconstruct accurate PDE solutions. Further, a physics-informed loss is also introduced to correct the prediction of unseen parameter instances. Incorporating the physics-informed loss also enables the model to be fine-tuned in an unsupervised manner on unseen PDE parameters. A numerical experiment is performed on a two-dimensional Burgers equation with a large variation of PDE parameters. We evaluate the proposed method at a large Reynolds number and obtain up to speedup of O(10^3) and ~1% relative error to the ground truth values.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Directional emission of nanoscale chiral sources modified by gap plasmons
Authors:
Hai Lin,
Te Wen,
**glin Tang,
Lulu Ye,
Guanyu Zhang,
Weidong Zhang,
Ying Gu,
Qihuang Gong,
Guowei Lu
Abstract:
Efficient manipulation of the emission direction of a chiral nanoscale light source is significant for information transmission and on-chip information processing. Here, we propose a scheme to control the directionality of nanoscale chiral light sources based on gap plasmons. The gap plasmon mode formed by a gold nanorod and a silver nanowire realizes the highly directional emission of chiral ligh…
▽ More
Efficient manipulation of the emission direction of a chiral nanoscale light source is significant for information transmission and on-chip information processing. Here, we propose a scheme to control the directionality of nanoscale chiral light sources based on gap plasmons. The gap plasmon mode formed by a gold nanorod and a silver nanowire realizes the highly directional emission of chiral light sources. Based on the optical spin-locked light propagation, the hybrid structure enables the directional coupling of chiral emission to achieve a contrast ratio of 99.5%. The emission direction can be manipulated by tailoring the configuration of the structure, such as the positions, aspect ratios, and orientation of the nanorod. Besides, a great local field enhancement exists for highly enhanced emission rates within the nanogap. This chiral nanoscale light source manipulation scheme provides a way for chiral valleytronics and integrated photonics.
△ Less
Submitted 8 February, 2023;
originally announced February 2023.
-
Deep Potentials for Materials Science
Authors:
Tongqi Wen,
Linfeng Zhang,
Han Wang,
Weinan E,
David J. Srolovitz
Abstract:
To fill the gap between accurate (and expensive) ab initio calculations and efficient atomistic simulations based on empirical interatomic potentials, a new class of descriptions of atomic interactions has emerged and been widely applied; i.e., machine learning potentials (MLPs). One recently developed type of MLP is the Deep Potential (DP) method. In this review, we provide an introduction to DP…
▽ More
To fill the gap between accurate (and expensive) ab initio calculations and efficient atomistic simulations based on empirical interatomic potentials, a new class of descriptions of atomic interactions has emerged and been widely applied; i.e., machine learning potentials (MLPs). One recently developed type of MLP is the Deep Potential (DP) method. In this review, we provide an introduction to DP methods in computational materials science. The theory underlying the DP method is presented along with a step-by-step introduction to their development and use. We also review materials applications of DPs in a wide range of materials systems. The DP Library provides a platform for the development of DPs and a database of extant DPs. We discuss the accuracy and efficiency of DPs compared with ab initio methods and empirical potentials.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Equivalent Distance Geometry Error for Molecular Conformation Comparison
Authors:
Shuwen Yang,
Tianyu Wen,
Ziyao Li,
Guojie Song
Abstract:
Straight-forward conformation generation models, which generate 3-D structures directly from input molecular graphs, play an important role in various molecular tasks with machine learning, such as 3D-QSAR and virtual screening in drug design. However, existing loss functions in these models either cost overmuch time or fail to guarantee the equivalence during optimization, which means treating di…
▽ More
Straight-forward conformation generation models, which generate 3-D structures directly from input molecular graphs, play an important role in various molecular tasks with machine learning, such as 3D-QSAR and virtual screening in drug design. However, existing loss functions in these models either cost overmuch time or fail to guarantee the equivalence during optimization, which means treating different items unfairly, resulting in poor local geometry in generated conformation. So, we propose Equivalent Distance Geometry Error (EDGE) to calculate the differential discrepancy between conformations where the essential factors of three kinds in conformation geometry (i.e. bond lengths, bond angles and dihedral angles) are equivalently optimized with certain weights. And in the improved version of our method, the optimization features minimizing linear transformations of atom-pair distances within 3-hop. Extensive experiments show that, compared with existing loss functions, EDGE performs effectively and efficiently in two tasks under the same backbones.
△ Less
Submitted 15 March, 2022; v1 submitted 13 November, 2021;
originally announced January 2022.
-
Catalyzing collaborations: Prescribed interactions at conferences determine team formation
Authors:
Emma R. Zajdela,
Kimberly Huynh,
Andy T. Wen,
Andrew L. Feig,
Richard J. Wiener,
Daniel M. Abrams
Abstract:
Collaboration plays a key role in knowledge production. Here, we show that patterns of interaction during conferences can be used to predict who will subsequently form a new collaboration, even when interaction is prescribed rather than freely chosen. We introduce a novel longitudinal dataset tracking patterns of interaction among hundreds of scientists during multi-day conferences encompassing di…
▽ More
Collaboration plays a key role in knowledge production. Here, we show that patterns of interaction during conferences can be used to predict who will subsequently form a new collaboration, even when interaction is prescribed rather than freely chosen. We introduce a novel longitudinal dataset tracking patterns of interaction among hundreds of scientists during multi-day conferences encompassing different scientific fields over the span of 5 years. We find that participants who formed new collaborations interacted 63% more on average than those who chose not to form new teams, and that those assigned to a higher interaction scenario had more than an eightfold increase in their odds of collaborating. We propose a simple mathematical framework for the process of team formation that incorporates this observation as well as the effect of memory beyond interaction time. The model accurately reproduces the collaborations formed across all conferences and outperforms seven other candidate models. This work not only suggests that encounters between individuals at conferences play an important role in sha** the future of science, but that these encounters can be designed to better catalyze collaborations.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Superconductivity in compressed SnPS3
Authors:
Binbin Yue,
Wei Zhong,
Ting Wen,
Yonggang Wang,
Hui Yu,
Xiaohui Yu,
Fang Hong
Abstract:
Metal phosphorous trichalcogenides, MPX3, is a group of van der Waals materials with rich electronic properties and even exotic magnetic behavior. These properties can be well manipulated by pressure/strain via effective control of interlayer interaction, lattice parameters and crystal structure. Superconducting transition has been observed in compressed FePSe3. However, it is the only one superco…
▽ More
Metal phosphorous trichalcogenides, MPX3, is a group of van der Waals materials with rich electronic properties and even exotic magnetic behavior. These properties can be well manipulated by pressure/strain via effective control of interlayer interaction, lattice parameters and crystal structure. Superconducting transition has been observed in compressed FePSe3. However, it is the only one superconductor reported in the large MPX3 family. Is it possible to achieve superconducting transition in other MPX3 compounds, especially in a trisulfide compound? In this work, we tentatively compressed the SnPS3 (an insulator with large band gap at ambient condition) up to 48.9 GPa, and managed to achieve the superconducting transition above 31.7 GPa with Tc ranging from ~2.2 K to ~2.8 K. The upper critical field is estimated to be ~3.03 T at 40.5 GPa. Optical absorption measurements together with Raman spectroscopy show a series of transitions under pressure, which is well consistent with the electric transport results. This work provides direct experimental evidence that SnPS3 undergoes an insulator-metal transition near 31.7 GPa. More importantly, it demonstrates that superconductivity can exist in MPS3 compounds, which not only further enriches the electronic properties of this kind of material but also paves a new avenue to explore the abundant emergence phenomena in the whole MPX3 family, and it also benefits the study of superconductor mechanism.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
A General Machine Learning-based Approach for Inverse Design of One-dimensional Photonic Crystals Toward Targeted Visible Light Reflection Spectrum
Authors:
Tao Zhan,
Quan-Shan Liu,
Lu Qiu,
Yuan-Jie Sun,
Tao Wen,
Rui Zhang
Abstract:
Data-driven methods have increasingly been applied to the development of optical systems as inexpensive and effective inverse design approaches. Optical properties (e.g., band-gap properties) of photonic crystals (PCs) are closely associated with characteristics of their light reflection spectra. Finding optimal PC constructions (within a pre-specified parameter space) that generate reflection spe…
▽ More
Data-driven methods have increasingly been applied to the development of optical systems as inexpensive and effective inverse design approaches. Optical properties (e.g., band-gap properties) of photonic crystals (PCs) are closely associated with characteristics of their light reflection spectra. Finding optimal PC constructions (within a pre-specified parameter space) that generate reflection spectra closest to a targeted spectrum is thus an interesting and meaningful inverse design problem, although relevant studies are still limited. Here we report a generally effective machine learning-based inverse design approach for one-dimensional photonic crystals (1DPCs), focusing on visible light spectra which are of high practical relevance. For a given class of 1DPC system, a deep neural network (DNN) in a unified structure is first trained over data from sizeable forward calculations (from layer thicknesses to spectrum). An iterative optimization scheme is then developed based on a coherent integration of DNN backward predictions (from spectrum to layer thicknesses), forward calculations, and Monte Carlo moves. We employ this new approach to four representative 1DPC systems including periodic structures with two-, three-, and four-layer repeating units and a heterostructure. The approach successfully converges to solutions of optimal 1DPC constructions for various targeted spectra regardless of their exact achievability. As two demonstrating examples, inverse designs toward a specially constructed "rectangle-shaped" green-light or red-light reflection spectrum are presented and discussed in detail. Remarkably, the results show that the approach can efficiently find out optimal layer thicknesses even when they are far outside the range covered by the original training data of DNN.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Spin wave propagation in uniform waveguide: effects, modulation and its application
Authors:
Lei Zheng,
Lichuan **,
Tianlong Wen,
Yulong Liao,
Xiaoli Tang,
Huaiwu Zhang,
Zhiyong Zhong
Abstract:
With the advent of the post-Moore era, researches on beyond-Complementary Metal Oxide Semiconductor (CMOS) approaches have been attracted more and more attention. Magnonics, or spin wave is one of the most promising technology beyond CMOS, which magnons-quanta for spin waves-process the information analogous to electronic charges in electronics. Information transmission by spin waves, which uses t…
▽ More
With the advent of the post-Moore era, researches on beyond-Complementary Metal Oxide Semiconductor (CMOS) approaches have been attracted more and more attention. Magnonics, or spin wave is one of the most promising technology beyond CMOS, which magnons-quanta for spin waves-process the information analogous to electronic charges in electronics. Information transmission by spin waves, which uses the frequency, amplitude and (or) phase to encode information, has a great many of advantages such as extremely low energy loss and wide-band frequency. Moreover, using the nonlinear characteristics of spin waves for information transmission can increase the extra degree of freedom of information. This review provides a tutorial overview over the effects of spin wave propagation and recent research progress in uniform spin wave waveguide. The propagation characteristics of spin waves in uniform waveguides and some special propagation phenomena such as spin wave beam splitting and self-focusing are described by combining experimental phenomena and theoretical formulas. Furthermore, we summarize methods for modulating propagation of spin wave in uniform waveguide, and comment on the advantages and limitations of these methods. The review may promote the development of information transmission technology based on spin waves.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Two distinct approaches to tune multiple reflective bands of one-dimensional photonic crystal at normal incidence
Authors:
Quan-Shan Liu,
Lu Qiu,
Tao Wen,
Rui Zhang
Abstract:
One-dimensional photonic crystals (1D PC) represent a class of periodic optical material, composed of alternating media with different dielectric constants along one direction. The most important property of 1D PCs is their photonic band-gap. However, multiple reflective bands are rarely reported in this research area. In this paper we demonstrate the tunability of multiple reflective bands in con…
▽ More
One-dimensional photonic crystals (1D PC) represent a class of periodic optical material, composed of alternating media with different dielectric constants along one direction. The most important property of 1D PCs is their photonic band-gap. However, multiple reflective bands are rarely reported in this research area. In this paper we demonstrate the tunability of multiple reflective bands in conventional 1D PC structure and 1D PC heterostructure. For both two types of 1D PC construction, positions of multiple reflective bands can be regulated under certain principles. In addition, structural color is revealed by transforming reflection spectra into CIE coordinates. It is indicated that the CIE coordinate shifts caused by multiple reflective bands behave quite different compared to those caused by one major photonic band-gap. The two approaches reported in this work may provide insights for the application of 1D PC in areas such as displays, sensors, and decoration.
△ Less
Submitted 4 November, 2021; v1 submitted 7 September, 2021;
originally announced September 2021.
-
High-Intensity and Uniform Red-Green-Blue Triple Reflective Bands Achieved by Rationally-Designed Ultrathin Heterostructure Photonic Crystals
Authors:
Lu Qiu,
Quan-Shan Liu,
Rui Zhang,
Tao Wen
Abstract:
The relationships between material constructions and reflective spectrum patterns are important properties of photonic crystals. One particular interesting reflectance profile is a high-intensity and uniform three-peak pattern with peak positions right located at the red, green, and blue (RGB, three original colors) region. For ease of construction, a seek for using one-dimensional photonic crysta…
▽ More
The relationships between material constructions and reflective spectrum patterns are important properties of photonic crystals. One particular interesting reflectance profile is a high-intensity and uniform three-peak pattern with peak positions right located at the red, green, and blue (RGB, three original colors) region. For ease of construction, a seek for using one-dimensional photonic crystals to achieve RGB triple reflective bands is a meaningful endeavor. Only very limited previous studies exist, all relying on traditional periodic photonic crystals (PPCs) and of large thickness. The underlying physical principles remain elusive, leaving the question of thickness limit to achieve RGB bands unaddressed. Here, we present the first detailed work to explore the thickness limit issue based on both theoretical and experimental investigation. A set of heuristically derived design principles are used to uncover that the break of translational symmetry, thus introducing heterostructure photonic crystals (HPCs), is essential to reduce the total optical path difference (OPD) to ~ 3200nm (the theoretical limit) while still exhibiting high-quality RGB bands. A systematic experiment based on a 12-layer heterostructure construction was performed and well confirmed the theoretical predictions. The associated three-peak properties are successfully used to realize quantum dot fluorescent enhancement phenomena. Furthermore, the HPC exhibits unusually stability against solvent stimulus, in strong contrast to typical behaviors reported in PPCs. Our work for the first time proposes and verifies important rational rules for designing ultrathin HPCs toward RGB reflective bands, and provides insights for a wider range of explorations of light manipulation in photonic crystals.
△ Less
Submitted 4 November, 2021; v1 submitted 6 September, 2021;
originally announced September 2021.
-
The third- and fourth-order orbital angular momentum multiplexed amplification with ultra-low differential mode gain
Authors:
Tian** Wen,
Shecheng Gao,
Wei Li,
Jia**g Tu,
Cheng Du,
Ji Zhou,
Bin Zhang,
Wei** Liu,
Zhaohui Li
Abstract:
In this Letter, a ring-core erbium-doped fiber (RC-EDF), with two-layer erbium-doped structure, supporting up to the fourth-order orbital angular momentum (OAM) mode is designed and fabricated for OAM mode multiplexed amplification. Using the RC-EDF, the third- and fourth-order OAM modes amplification with ultra-low differential mode gain (DMG) is demonstrated by observing both the modal intensity…
▽ More
In this Letter, a ring-core erbium-doped fiber (RC-EDF), with two-layer erbium-doped structure, supporting up to the fourth-order orbital angular momentum (OAM) mode is designed and fabricated for OAM mode multiplexed amplification. Using the RC-EDF, the third- and fourth-order OAM modes amplification with ultra-low differential mode gain (DMG) is demonstrated by observing both the modal intensity and phase distribution and measuring the modal gain under the fundamental mode core-pum**. The measured average gain of four modes (l=+3, -3, +4, -4) multiplexed amplification is higher than 19dB cover the C-band and the DMG is less than 1dB. Additionally, the gain of two conjugate OAM modes are almost the same under different pump power no matter they are amplified simultaneously or separately.
△ Less
Submitted 22 August, 2021;
originally announced August 2021.
-
Controlled plasmon-enhanced fluorescence by spherical microcavity
Authors:
**gyi Zhao,
Weidong Zhang,
Te Wen,
Lulu Ye,
Hai Lin,
**glin Tang,
Qihuang Gong,
Guowei Lu
Abstract:
A surrounding electromagnetic environment can engineer spontaneous emissions from quantum emitters through the Purcell effect. For instance, a plasmonic antenna can efficiently confine an electromagnetic field and enhance the fluorescent process. In this study, we demonstrate that a photonic microcavity can modulate plasmon-enhanced fluorescence by engineering the local electromagnetic environment…
▽ More
A surrounding electromagnetic environment can engineer spontaneous emissions from quantum emitters through the Purcell effect. For instance, a plasmonic antenna can efficiently confine an electromagnetic field and enhance the fluorescent process. In this study, we demonstrate that a photonic microcavity can modulate plasmon-enhanced fluorescence by engineering the local electromagnetic environment. Consequently, we constructed a plasmon-enhanced emitter (PE-emitter), which comprised a nanorod and a nanodiamond, using the nanomanipulation technique. Furthermore, we controlled a polystyrene sphere approaching the PE-emitter and investigated in situ the associated fluorescent spectrum and lifetime. The emission of PE-emitter can be enhanced resonantly at the photonic modes as compared to that within the free spectral range. The spectral shape modulated by photonic modes is independent of the separation between the PS sphere and PE-emitter. The band integral of the fluorescence decay rate can be enhanced or suppressed after the PS sphere couples to the PE-emitters, depending on the coupling strength between the plasmonic antenna and the photonic cavity. These findings can be utilized in sensing and imaging applications.
△ Less
Submitted 21 June, 2021;
originally announced June 2021.
-
Construction and On-site Performance of the LHAASO WFCTA Camera
Authors:
F. Aharonian,
Q. An,
Axikegu,
L. X. Bai,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
H. Cai,
J. T. Cai,
Z. Cao,
Z. Cao,
J. Chang,
J. F. Chang,
X. C. Chang,
B. M. Chen,
J. Chen,
L. Chen,
L. Chen,
L. Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. H. Chen
, et al. (234 additional authors not shown)
Abstract:
The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this…
▽ More
The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here.
△ Less
Submitted 4 July, 2021; v1 submitted 29 December, 2020;
originally announced December 2020.
-
Short- and medium-range orders in Al90Tb10 glass and their relation to the structures of competing crystalline phases
Authors:
L. Tang,
Z. J. Yang,
T. Q. Wen,
K. M. Ho,
M. J. Kramer,
C. Z. Wang
Abstract:
Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-rang…
▽ More
Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-range order (MRO) in Bergman-type packing extended out to the second and third coordination shells is also clearly observed. Analysis of the network formed by the '3661' and '15551' clusters show that ~82% of such SRO units share their faces or vertexes, while only ~6% of neighboring SRO pairs are interpenetrating. Such a network topology is consistent with the Bergman-type MRO around the Tb-centers. Moreover, crystal structure searches using genetic algorithm and the neural network interatomic potential reveal several low-energy metastable crystalline structures in the composition range close to Al90Tb10. Some of these crystalline structures have the '3661' SRO while others have the '15551' SRO. While the crystalline structures with the '3661' SRO also exhibit the MRO very similar to that observed in the glass, the ones with the '15551' SRO have very different atomic packing in the second and third shells around the Tb centers from that of the Bergman-type MRO observed in the glassy phase.
△ Less
Submitted 27 August, 2020;
originally announced August 2020.
-
Anapole mediated giant photothermal nonlinearity in nanostructured silicon
Authors:
Tianyue Zhang,
Ying Che,
Kai Chen,
Jian Xu,
Yi Xu,
Te Wen,
Guowei Lu,
Xiaowei Liu,
Bin Wang,
Xiaoxuan Xu,
Yi-Shiou Duh,
Yu-Lung Tang,
**g Han,
Yaoyu Cao,
Bai-Ou Guan,
Shi-Wei Chu,
** Li
Abstract:
Featured with a plethora of electric and magnetic Mie resonances, high index dielectric nanostructures offer a versatile platform to concentrate light-matter interactions at the nanoscale. By integrating unique features of far-field scattering control and near-field concentration from radiationless anapole states, here, we demonstrate a giant photothermal nonlinearity in single subwavelength-sized…
▽ More
Featured with a plethora of electric and magnetic Mie resonances, high index dielectric nanostructures offer a versatile platform to concentrate light-matter interactions at the nanoscale. By integrating unique features of far-field scattering control and near-field concentration from radiationless anapole states, here, we demonstrate a giant photothermal nonlinearity in single subwavelength-sized silicon nanodisks. The nanoscale energy concentration and consequent near-field enhancements mediated by the anapole mode yield a reversible nonlinear scattering with a large modulation depth and a broad dynamic range, unveiling a record-high nonlinear index change up to 0.5 at mild incident light intensities on the order of MW/cm2. The observed photothermal nonlinearity showcases three orders of magnitude enhancement compared with that of unstructured bulk silicon, as well as nearly one order of magnitude higher than that through the radiative electric dipolar mode. Such nonlinear scattering can empower distinctive point spread functions in confocal reflectance imaging, offering the potential for far-field localization of nanostructured Si with an accuracy approaching 40 nm. Our findings shed new light on active silicon photonics based on optical anapoles.
△ Less
Submitted 16 June, 2020; v1 submitted 26 February, 2020;
originally announced February 2020.
-
Development of Interatomic Potential for Al-Tb Alloy by Deep Neural Network Learning Method
Authors:
L. Tang,
Z. J. Yang,
T. Q. Wen,
K. M. Ho,
M. J. Kramer,
C. Z. Wang
Abstract:
An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show…
▽ More
An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show the obtained DNN model can well reproduce the energies and forces calculated by AIMD. Molecular dynamics (MD) simulations using the DNN interatomic potential also accurately describe the structural properties of Al90Tb10 liquid, such as the partial pair correlation functions (PPCFs) and the bond angle distributions, in comparison with the results from AIMD. Furthermore, the developed DNN interatomic potential predicts the formation energies of crystalline phases of Al-Tb system with the accuracy comparable to ab initio calculations. The structure factor of Al90Tb10 metallic glass obtained by MD simulation using the developed DNN interatomic potential is also in good agreement with the experimental X-ray diffraction data.
△ Less
Submitted 28 March, 2020; v1 submitted 18 January, 2020;
originally announced January 2020.
-
Evaluating the Vulnerability of Communities in Social Networks by Gravity Model
Authors:
Tao Wen
Abstract:
With the development of network science, the various properties of complex networks have recently received extensive attention. Among these properties, the vulnerability of the communities (VoCs) is particularly important. In the conventional research, only parts of structural features of the community rather than multiple aspects are considered in the evaluating model. However, in reality, the im…
▽ More
With the development of network science, the various properties of complex networks have recently received extensive attention. Among these properties, the vulnerability of the communities (VoCs) is particularly important. In the conventional research, only parts of structural features of the community rather than multiple aspects are considered in the evaluating model. However, in reality, the impact on the VoC is multifaceted, not only its own structure property, but also the influence of other communities. In order to better model the influence between communities, so as to evaluate the VoCs in the social network, a gravity-based community vulnerability evaluation model is proposed in this paper. In this proposed model, three different aspects of the factor are considered, i.e. the number of edges inside the community, the number of edges connected neighboring communities, and the gravity index (GI) of each community, which correspond to the interior information, small scale interaction relationship, and large scale interaction relationship of communities. By means of the Jensen-Shannon divergence (JSD) and log-sigmoid transition (LST) function, the abstract distance (AD) between each pair of communities can be calculated to construct the community network (CN). With the usage of gravity model, the GI of each community which describes the large scale interaction relationship can be obtained. Eventually, the community vulnerability degree and order can be calculated by this proposed model, and the sensitivity of weighting parameters is analyzed by Sobol' indices. In particular, this proposed method can degenerate to the classical method with the setting of weighting parameters. The effectiveness and reasonability of this proposed model are demonstrated by several real world complex networks.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
Identification of influencers in complex networks by local information dimensionality
Authors:
Tao Wen,
Yong Deng
Abstract:
The identification of influential spreaders in complex networks is a popular topic in studies of network characteristics. Many centrality measures have been proposed to address this problem, but most have limitations. In this paper, a method for identifying influencers in complex networks via the local information dimensionality. The proposed method considers the local structural properties around…
▽ More
The identification of influential spreaders in complex networks is a popular topic in studies of network characteristics. Many centrality measures have been proposed to address this problem, but most have limitations. In this paper, a method for identifying influencers in complex networks via the local information dimensionality. The proposed method considers the local structural properties around the central node; therefore, the scale of locality only increases to half of the maximum value of the shortest distance from the central node. Thus, the proposed method considers the quasilocal information and reduces the computational complexity. The information (number of nodes) in boxes is described via the Shannon entropy, which is more reasonable. A node is more influential when its local information dimensionality is higher. In order to show the effectiveness of the proposed method, five existing centrality measures are used as comparison methods to rank influential nodes in six real world complex networks. In addition, a susceptible infected (SI) model and Kendall's tau coefficient are applied to show the correlation between different methods. Experiment results show the superiority of the proposed method.
△ Less
Submitted 5 October, 2019; v1 submitted 29 August, 2019;
originally announced August 2019.
-
Bias-free reconfigurable magnonic phase shifter based on a spin-current controlled ferromagnetic resonator
Authors:
Zikang Zhang,
Shuang Liu,
Tianlong Wen,
Dainan Zhang,
Lichuan **,
Yulong Liao,
Xiaoli Tang,
Zhiyong Zhong
Abstract:
Controllable phase modulation plays a pivotal role in the researches of magnonic logic gates. Here we propose a reconfigurable spin-current controlled magnonic phase shifter based on a ferromagnetic resonator. The proposed phase shifter requires no magnetic bias field during operation. The device is directly configured over the waveguide while kee** the original structure of the waveguide unaffe…
▽ More
Controllable phase modulation plays a pivotal role in the researches of magnonic logic gates. Here we propose a reconfigurable spin-current controlled magnonic phase shifter based on a ferromagnetic resonator. The proposed phase shifter requires no magnetic bias field during operation. The device is directly configured over the waveguide while kee** the original structure of the waveguide unaffected. Numerical micromagnetic simulations show that the phase shifter could yield either a π-phase or no shift depending on the magnetization status of the resonator, which can be controlled by a current pulse. Moreover, the phase-shifting operation could be affected by spin current. At different input current density, the device could be either used as a dynamic controlled phase shifter or a spin-wave valve. Finally, a XNOR magnonic logic gate is demonstrated using the proposed phase shifter. Our work can be a beneficial step to enhance the functionality and compatibility of the magnonic logic circuits.
△ Less
Submitted 2 July, 2019;
originally announced July 2019.
-
Magnonic waveguide based on exchange-spring magnetic structure
Authors:
Lixiang Wang,
Leisen Gao,
Lichuan **,
Yulong Liao,
Tianlong Wen,
Xiaoli Tang,
Huaiwu Zhang,
Zhiyong Zhong
Abstract:
We propose to use a soft/hard exchange-spring coupling bilayer magnetic structure to introduce a narrow channel for spin-wave propagation. We show by micromagnetic simulations that broad-band Damon-Eshbach geometry spin waves can be strongly localized into the channel and propagate effectively with a proper high group velocity. The beamwidth of the bound mode spin waves is almost independent from…
▽ More
We propose to use a soft/hard exchange-spring coupling bilayer magnetic structure to introduce a narrow channel for spin-wave propagation. We show by micromagnetic simulations that broad-band Damon-Eshbach geometry spin waves can be strongly localized into the channel and propagate effectively with a proper high group velocity. The beamwidth of the bound mode spin waves is almost independent from the frequency and is smaller than 24nm. For a low-frequency excitation, we further investigate the appearance of two other spin beams in the lateral of the channel. In contrast to a domain wall, the channel formed by exchange-spring coupling can be easier to realize in experimental scenarios and holds stronger immunity to surroundings. This work is expected to open new possibilities for energy-efficient spin-wave guiding as well as to help shape the field of beam magnonics.
△ Less
Submitted 9 December, 2017;
originally announced December 2017.
-
Enhanced light emission from plasmonic nanostructures by molecules
Authors:
Yuqing Cheng,
**gyi Zhao,
Te Wen,
Guantao Li,
Jianning Xu,
Qihuang Gong,
Guowei Lu
Abstract:
Interaction between plasmonic nanostructures and molecules is modeled based on the concept of quantized optical cavity for surface enhanced Raman scattering process. We have found that the background emission from plasmonic nanostructures is not constant as speculated ordinarily, it is enhanced accompanying with the molecules Raman scattering. The plasmonic nanostructures not only scatter elastica…
▽ More
Interaction between plasmonic nanostructures and molecules is modeled based on the concept of quantized optical cavity for surface enhanced Raman scattering process. We have found that the background emission from plasmonic nanostructures is not constant as speculated ordinarily, it is enhanced accompanying with the molecules Raman scattering. The plasmonic nanostructures not only scatter elastically the energy coupling from the molecules excited states, but also radiate it inelastically as surface plasmon emission partly resulting an enhanced background. According to single nanoparticle experiments, the model reveals that the background fluctuations is mainly due to the induced field of the molecules, which increases the local field felt by the nanostructures that was often overlooked in the past. These findings suggest considering the plasmonic nanostructures and molecules as a hybrid entity to analyze and optimize the surface enhanced spectroscopy.
△ Less
Submitted 20 March, 2017;
originally announced March 2017.
-
Poloidal rotation driven by nonlinear momentum transport in strong electrostatic turbulence
Authors:
Lu Wang,
Tiliang Wen,
P. H. Diamond
Abstract:
Virtually, all existing theoretical works on turbulent poloidal momentum transport are based on quasilinear theory. Nonlinear poloidal momentum flux - $\langle \tilde{v}_r \tilde{n} \tilde{v}_θ \rangle$ is universally neglected. However, in the strong turbulence regime where relative fluctuation amplitude is no longer small, quasilinear theory is invalid. This is true at the all-important plasma e…
▽ More
Virtually, all existing theoretical works on turbulent poloidal momentum transport are based on quasilinear theory. Nonlinear poloidal momentum flux - $\langle \tilde{v}_r \tilde{n} \tilde{v}_θ \rangle$ is universally neglected. However, in the strong turbulence regime where relative fluctuation amplitude is no longer small, quasilinear theory is invalid. This is true at the all-important plasma edge. In this work, nonlinear poloidal momentum flux $ \langle \tilde{v}_r \tilde{n} \tilde{v}_θ \rangle $ in strong electrostatic turbulence is calculated using Hasegawa-Mima equation, and is compared with quasilinear poloidal Reynolds stress. A novel property is that symmetry breaking in fluctuation spectrum is not necessary for a nonlinear poloidal momentum flux. This is fundamentally different from the quasilinear Reynold stress. Furthermore, the comparison implies that the poloidal rotation drive from the radial gradient of nonlinear momentum flux is comparable to that from the quasilinear Reynolds force. Nonlinear poloidal momentum transport in strong electrostatic turbulence is thus not negligible for poloidal rotation drive, and so may be significant to transport barrier formation.
△ Less
Submitted 26 July, 2016;
originally announced July 2016.
-
Nonlinear parallel momentum transport in strong turbulence
Authors:
Lu Wang,
Tiliang Wen,
P. H. Diamond
Abstract:
Most existing theoretical studies of momentum transport focus on calculating the Reynolds stress based on quasilinear theory, without considering the \emph{nonlinear} momentum flux-$<\tilde{v}_r \tilde{n} \tilde{u}_{\|} >$. However, a recent experiment on TORPEX found that the nonlinear toroidal momentum flux induced by blobs makes a significant contribution as compared to the Reynolds stress [Lab…
▽ More
Most existing theoretical studies of momentum transport focus on calculating the Reynolds stress based on quasilinear theory, without considering the \emph{nonlinear} momentum flux-$<\tilde{v}_r \tilde{n} \tilde{u}_{\|} >$. However, a recent experiment on TORPEX found that the nonlinear toroidal momentum flux induced by blobs makes a significant contribution as compared to the Reynolds stress [Labit et al., Phys. Plasmas {\bf 18}, 032308 (2011)]. In this work, the nonlinear parallel momentum flux in strong turbulence is calculated by using three dimensional Hasegawa-Mima equation. It is shown that nonlinear diffusivity is smaller than quasilinear diffusivity from Reynolds stress. However, the leading order nonlinear residual stress can be comparable to the quasilinear residual stress, and so could be important to intrinsic rotation in tokamak edge plasmas. A key difference from the quasilinear residual stress is that parallel fluctuation spectrum asymmetry is not required for nonlinear residual stress.
△ Less
Submitted 1 March, 2015;
originally announced March 2015.
-
Self-guiding of 100 TW Femtosecond Laser Pulses in Centimeter-scale Underdense Plasma
Authors:
L. M. Chen,
H. Kotaki,
K. Nakajima,
J. Koga,
S. V. Bulanov,
T. Tajima,
Y. Q. Gu,
H. S. Peng,
X. X. Wang,
T. S. Wen,
H. J. Liu,
C. Y. Jiao,
C. G. Zhang,
X. J. Huang,
Y. Guo,
K. N. Zhou,
J. F. Hua,
W. M. An,
C. X. Tang,
Y. Z. Lin
Abstract:
An experiment for studying laser self-guiding has been carried out for the high power ultrashort pulse laser interaction with an underdense plasma slab. Formation of an extremely long plasma channel and its bending are observed when the laser pulse power is much higher than the critical power for relativistic self-focusing. The long self-guiding channel formation is accompanied by electron accel…
▽ More
An experiment for studying laser self-guiding has been carried out for the high power ultrashort pulse laser interaction with an underdense plasma slab. Formation of an extremely long plasma channel and its bending are observed when the laser pulse power is much higher than the critical power for relativistic self-focusing. The long self-guiding channel formation is accompanied by electron acceleration with a low transverse emittance and high electric current. Particle-in-cell simulations show that laser bending occurs when the accelerated electrons overtake the laser pulse and modify the refractive index in the region in front of the laser pulse.
△ Less
Submitted 28 May, 2006;
originally announced May 2006.