-
Anomalous crystalline ordering of particles in a viscoelastic fluid under high shear
Authors:
Sijie Sun,
Nan Xue,
Stefano Aime,
Hyoungsoo Kim,
Jizhou Tang,
Gareth H. McKinley,
Howard A. Stone,
David A. Weitz
Abstract:
Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shea…
▽ More
Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shear rates, the flow becomes unstable, even in the absence of particles. This instability makes it very difficult to determine the properties of a particle suspension. Here we use a fully immersed parallel plate geometry to measure the high-shear-rate behavior of a suspension of particles in a viscoelastic fluid. We find an unexpected separation of the particles within the suspension resulting in the formation of a layer of particles in the center of the cell. Remarkably, monodisperse particles form a crystalline layer which dramatically alters the shear instability. By combining measurements of the velocity field and torque fluctuations, we show that this solid layer disrupts the flow instability and introduces a new, single-frequency component to the torque fluctuations that reflects a dominant velocity pattern in the flow. These results highlight the interplay between particles and a suspending viscoelastic fluid at very high shear rates.
△ Less
Submitted 26 June, 2023; v1 submitted 16 March, 2023;
originally announced March 2023.
-
Intersonic Detachment Surface Waves in Elastomer Frictional Sliding
Authors:
Huifeng Du,
Emmanuel Virot,
Liying Wang,
Sam Kharchenko,
Md Arifur Rahman,
David A. Weitz,
Shmuel M. Rubinstein,
Nicholas X. Fang
Abstract:
Elastomeric materials when sliding on clean and rough surfaces generate wrinkles at the interface due to tangential stress gradients. These interfacial folds travel along the bottom of elastomer as surface detachment waves to facilitate the apparent sliding motion of elastomer. At very low sliding speed compared to elastic surface waves, the process is dominated by surface adhesion and relaxation…
▽ More
Elastomeric materials when sliding on clean and rough surfaces generate wrinkles at the interface due to tangential stress gradients. These interfacial folds travel along the bottom of elastomer as surface detachment waves to facilitate the apparent sliding motion of elastomer. At very low sliding speed compared to elastic surface waves, the process is dominated by surface adhesion and relaxation effects, and the phenomenon is historically referred to as Schallamach waves. We report in this letter the observation of fast-traveling intersonic detachment waves exceeding the Rayleigh and shear wave velocities of the soft material in contact. The spatio-temporal analysis revealed the accelerating nature of the detachment wave, and the scaling of wave speed with the elastic modului of the material suggests that this process is governed by elasticity and inertia. Multiple wave signatures on the plot were connected to different stages of surface wrinkles, as they exhibited distinctive slopes (from which velocities were derived) in the generation, propagation and rebound phases. We also characterized the frequencies of wrinkle generation in addition to the speeds and found a consistent scaling law of these two wave characteristics as the stiffness of elastomer increased. Physical implications of this new finding may further promote our understanding of elastomer noise generation mechanisms, as at macroscopic sliding velocity, the frequency of elastomer instability readily enters human audible ranges and interacts with other vibratory frequencies to cooperatively create harsh and detrimental noises in disc braking, wiper blade and shoe squeaking among many other elastomer applications.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Elucidating the mechanism of step-emulsification
Authors:
Andrea Montessori,
Marco Lauricella,
Sauro Succi,
Elad Stolovicki,
David A. Weitz
Abstract:
Three-dimensional, time-dependent direct simulations of step emulsification micro-devices highlight two essential mechanisms for droplet formation: first, the onset of an adverse pressure gradient driving a back-flow of the continuous phase from the external reservoir to the micro-channel. Second, the striction of the flowing jet which leads to its subsequent rupture. It is also shown that such a…
▽ More
Three-dimensional, time-dependent direct simulations of step emulsification micro-devices highlight two essential mechanisms for droplet formation: first, the onset of an adverse pressure gradient driving a back-flow of the continuous phase from the external reservoir to the micro-channel. Second, the striction of the flowing jet which leads to its subsequent rupture. It is also shown that such a rupture is delayed and eventually suppressed by increasing the flow speed of the dispersed phase within the channel, due to the stabilising effect of dynamic pressure. This suggests a new criterion for drip**-jetting transition, based on local values of the Capillary and Weber numbers.
△ Less
Submitted 19 June, 2020;
originally announced June 2020.
-
The vortex-driven dynamics of droplets within droplets
Authors:
A. Tiribocchi,
A. Montessori,
M. Lauricella,
F. Bonaccorso,
S. Succi,
S. Aime,
M. Milani,
D. A. Weitz
Abstract:
Understanding the fluid-structure interaction is crucial for an optimal design and manufacturing of soft mesoscale materials. Multi-core emulsions are a class of soft fluids assembled from cluster configurations of deformable oil-water double droplets (cores), often employed as building-blocks for the realisation of devices of interest in bio-technology, such as drug-delivery, tissue engineering a…
▽ More
Understanding the fluid-structure interaction is crucial for an optimal design and manufacturing of soft mesoscale materials. Multi-core emulsions are a class of soft fluids assembled from cluster configurations of deformable oil-water double droplets (cores), often employed as building-blocks for the realisation of devices of interest in bio-technology, such as drug-delivery, tissue engineering and regenerative medicine. Here, we study the physics of multi-core emulsions flowing in microfluidic channels and report numerical evidence of a surprisingly rich variety of driven non-equilibrium states (NES), whose formation is caused by a dipolar fluid vortex triggered by the sheared structure of the flow carrier within the microchannel. The observed dynamic regimes range from long-lived NES at low core-area fraction, characterised by a planetary-like motion of the internal drops, to short-lived ones at high core-area fraction, in which a pre-chaotic motion results from multi-body collisions of inner drops, as combined with self-consistent hydrodynamic interactions. The onset of pre-chaotic behavior is marked by transitions of the cores from one vortex to another, a process that we interpret as manifestations of the system to maximize its entropy by filling voids, as they arise dynamically within the capsule.
△ Less
Submitted 11 January, 2021; v1 submitted 25 April, 2020;
originally announced April 2020.
-
Additional contributions from: Nobel Symposium 162 - Microfluidics
Authors:
Stefan Löfås,
Amy E. Herr,
Jianhua Qin,
Tuomas Knowles,
Takehiko Kitamori,
Hang Lu,
David J. Beebe,
Jongyoon Han,
James Landers,
Andreas Manz,
Roland Zengerle,
David A. Weitz,
Johan Elf,
Thomas Laurell
Abstract:
Series of short contributions that are part of Nobel Symposium 162 - Microfluidics arXiv:1712.08369.
Series of short contributions that are part of Nobel Symposium 162 - Microfluidics arXiv:1712.08369.
△ Less
Submitted 22 February, 2018;
originally announced February 2018.
-
Multi-Stage Transformation and Lattice Fluctuation at AgCl-Ag Interface
Authors:
**gshan S. Du,
Jungwon Park,
QHwan Kim,
Wonho Jhe,
Vinayak P. Dravid,
Deren Yang,
David A. Weitz
Abstract:
Solid-state transformation is often accompanied by mechanical expansion/compression, due to their volume change and structural evolution at interfaces at the atomic scale. However, these two types of dynamics are usually difficult to monitor in the same time. In this work, we use in-situ transmission electron microscopy to directly study the reduction transformation at the AgCl-Ag interface. Three…
▽ More
Solid-state transformation is often accompanied by mechanical expansion/compression, due to their volume change and structural evolution at interfaces at the atomic scale. However, these two types of dynamics are usually difficult to monitor in the same time. In this work, we use in-situ transmission electron microscopy to directly study the reduction transformation at the AgCl-Ag interface. Three stages of lattice fluctuations were identified and correlated to the structural evolution. During the steady state, a quasi-layered growth mode of Ag in both vertical and lateral directions were observed due to the confinement of AgCl lattices. The development of planar defects and depletion of AgCl are respectively associated with lattice compression and relaxation. Topography and structure of decomposing AgCl was further monitored by in-situ scanning transmission electron microscopy. Silver species are suggested to originate from both the surface and the interior of AgCl, and be transported to the interface. Such mass transport may have enabled the steady state and lattice compression in this volume-shrinking transformation.
△ Less
Submitted 13 November, 2017;
originally announced November 2017.
-
Local pore size correlations determine flow distributions in porous media
Authors:
Karen Alim,
Shima Parsa,
David A. Weitz,
Michael P. Brenner
Abstract:
The relationship between the microstructure of a porous medium and the observed flow distribution is still a puzzle. We resolve it with an analytical model, where the local correlations between adjacent pores, which determine the distribution of flows propagated from one pore downstream, predict the flow distribution. Numerical simulations of a two-dimensional porous medium verify the model and cl…
▽ More
The relationship between the microstructure of a porous medium and the observed flow distribution is still a puzzle. We resolve it with an analytical model, where the local correlations between adjacent pores, which determine the distribution of flows propagated from one pore downstream, predict the flow distribution. Numerical simulations of a two-dimensional porous medium verify the model and clearly show the transition of flow distributions from $δ$-function-like via Gaussians to exponential with increasing disorder. Comparison to experimental data further verifies our numerical approach.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
Universal geometric constraints during epithelial jamming
Authors:
Lior Atia,
Dapeng Bi,
Yasha Sharma,
Jennifer A. Mitchel,
Bomi Gweon,
Stephan Koehler,
Stephen J. DeCamp,
Bo Lan,
Rebecca Hirsch,
Adrian F. Pegoraro,
Kyu Ha Lee,
Jacqueline Starr,
David A. Weitz,
Adam C. Martin,
**-Ah Park,
James P. Butler,
Jeffrey J. Fredberg
Abstract:
As an injury heals, an embryo develops, or a carcinoma spreads, epithelial cells systematically change their shape. In each of these processes cell shape is studied extensively, whereas variation of shape from cell-to-cell is dismissed most often as biological noise. But where do cell shape and variation of cell shape come from? Here we report that cell shape and shape variation are mutually const…
▽ More
As an injury heals, an embryo develops, or a carcinoma spreads, epithelial cells systematically change their shape. In each of these processes cell shape is studied extensively, whereas variation of shape from cell-to-cell is dismissed most often as biological noise. But where do cell shape and variation of cell shape come from? Here we report that cell shape and shape variation are mutually constrained through a relationship that is purely geometrical. That relationship is shown to govern maturation of the pseudostratified bronchial epithelial layer cultured from both non-asthmatic and asthmatic donors as well as formation of the ventral furrow in the epithelial monolayer of the Drosophila embryo in vivo. Across these and other vastly different epithelial systems, cell shape variation collapses to a family of distributions that is common to all and potentially universal. That distribution, in turn, is accounted for quantitatively by a mechanistic theory of cell-cell interaction showing that cell shape becomes progressively less elongated and less variable as the layer becomes progressively more jammed. These findings thus uncover a connection between jamming and geometry that is generic -spanning jammed living and inert systems alike- and demonstrate that proximity of the cell layer to the jammed state is the principal determinant of the most primitive features of epithelial cell shape and shape variation.
△ Less
Submitted 12 May, 2017;
originally announced May 2017.
-
Physical limits to biomechanical sensing
Authors:
Farzan Beroz,
Louise M. Jawerth,
Stefan Münster,
David A. Weitz,
Chase P. Broedersz,
Ned S. Wingreen
Abstract:
Cells actively probe and respond to the stiffness of their surroundings. Since mechanosensory cells in connective tissue are surrounded by a disordered network of biopolymers, their in vivo mechanical environment can be extremely heterogeneous. Here, we investigate how this heterogeneity impacts mechanosensing by modeling the cell as an idealized local stiffness sensor inside a disordered fiber ne…
▽ More
Cells actively probe and respond to the stiffness of their surroundings. Since mechanosensory cells in connective tissue are surrounded by a disordered network of biopolymers, their in vivo mechanical environment can be extremely heterogeneous. Here, we investigate how this heterogeneity impacts mechanosensing by modeling the cell as an idealized local stiffness sensor inside a disordered fiber network. For all types of networks we study, including experimentally-imaged collagen and fibrin architectures, we find that measurements applied at different points throughout a given network yield a strikingly broad range of local stiffnesses, spanning roughly two decades. We verify via simulations and scaling arguments that this broad range of local stiffnesses is a generic property of disordered fiber networks, and show that the range can be further increased by tuning specific network features, including the presence of long fibers and the proximity to elastic transitions. These features additionally allow for a highly tunable dependence of stiffness on probe length. Finally, we show that to obtain optimal, reliable estimates of global tissue stiffness, a cell must adjust its size, shape, and position to integrate multiple stiffness measurements over extended regions of space.
△ Less
Submitted 4 August, 2016;
originally announced August 2016.
-
Activity driven fluctuations in living cells
Authors:
É. Fodor,
M. Guo,
N. S. Gov,
P. Visco,
D. A. Weitz,
F. van Wijland
Abstract:
We propose a model for the dynamics of a probe embedded in a living cell, where both thermal fluctuations and nonequilibrium activity coexist. The model is based on a confining harmonic potential describing the elastic cytoskeletal matrix, which undergoes random active hops as a result of the nonequilibrium rearrangements within the cell. We describe the probe's statistics and we bring forth quant…
▽ More
We propose a model for the dynamics of a probe embedded in a living cell, where both thermal fluctuations and nonequilibrium activity coexist. The model is based on a confining harmonic potential describing the elastic cytoskeletal matrix, which undergoes random active hops as a result of the nonequilibrium rearrangements within the cell. We describe the probe's statistics and we bring forth quantities affected by the nonequilibrium activity. We find an excellent agreement between the predictions of our model and experimental results for tracers inside living cells. Finally, we exploit our model to arrive at quantitative predictions for the parameters characterizing nonequilibrium activity, such as the typical time scale of the activity and the amplitude of the active fluctuations.
△ Less
Submitted 24 May, 2015;
originally announced May 2015.
-
Fluid breakup during simultaneous two-phase flow through a three-dimensional porous medium
Authors:
Sujit S. Datta,
Jean-Baptiste Dupin,
David A. Weitz
Abstract:
We use confocal microscopy to directly visualize the simultaneous flow of both a wetting and a non-wetting fluid through a model three-dimensional (3D) porous medium. We find that, for small flow rates, both fluids flow through unchanging, distinct, connected 3D pathways; in stark contrast, at sufficiently large flow rates, the non-wetting fluid is broken up into discrete ganglia. By performing ex…
▽ More
We use confocal microscopy to directly visualize the simultaneous flow of both a wetting and a non-wetting fluid through a model three-dimensional (3D) porous medium. We find that, for small flow rates, both fluids flow through unchanging, distinct, connected 3D pathways; in stark contrast, at sufficiently large flow rates, the non-wetting fluid is broken up into discrete ganglia. By performing experiments over a range of flow rates, using fluids of different viscosities, and with porous media having different geometries, we show that this transition can be characterized by a state diagram that depends on the capillary numbers of both fluids, suggesting that it is controlled by the competition between the viscous forces exerted on the flowing oil and the capillary forces at the pore scale. Our results thus help elucidate the diverse range of behaviors that arise in two-phase flow through a 3D porous medium.
△ Less
Submitted 26 June, 2014;
originally announced June 2014.
-
Mobilization of a trapped non-wetting fluid from a three-dimensional porous medium
Authors:
Sujit S. Datta,
T. S. Ramakrishnan,
David A. Weitz
Abstract:
We use confocal microscopy to directly visualize the formation and complex morphologies of trapped non-wetting fluid ganglia within a model 3D porous medium. The wetting fluid continues to flow around the ganglia after they form; this flow is characterized by a capillary number, Ca. We find that the ganglia configurations do not vary for small Ca; by contrast, as Ca is increased above a threshold…
▽ More
We use confocal microscopy to directly visualize the formation and complex morphologies of trapped non-wetting fluid ganglia within a model 3D porous medium. The wetting fluid continues to flow around the ganglia after they form; this flow is characterized by a capillary number, Ca. We find that the ganglia configurations do not vary for small Ca; by contrast, as Ca is increased above a threshold value, the largest ganglia start to become mobilized and are ultimately removed from the medium. By combining our 3D visualization with measurements of the bulk transport, we show that this behavior can be quantitatively understood by balancing the viscous forces exerted on the ganglia with the pore-scale capillary forces that keep them trapped within the medium. Our work thus helps elucidate the fluid dynamics underlying the mobilization of a trapped non-wetting fluid from a 3D porous medium.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
Expansion and rupture of charged microcapsules
Authors:
Sujit S. Datta,
Alireza Abbaspourrad,
David A. Weitz
Abstract:
We study the deformations of pH-responsive spherical microcapsules -- micrometer-scale liquid drops surrounded by thin, solid shells -- under the influence of electrostatic forces. When exposed to a large concentration of NaOH, the microcapsules become highly charged, and expand isotropically. We find that the extent of this expansion can be understood by coupling electrostatics with shell theory;…
▽ More
We study the deformations of pH-responsive spherical microcapsules -- micrometer-scale liquid drops surrounded by thin, solid shells -- under the influence of electrostatic forces. When exposed to a large concentration of NaOH, the microcapsules become highly charged, and expand isotropically. We find that the extent of this expansion can be understood by coupling electrostatics with shell theory; moreover, the expansion dynamics is well described by Darcy's law for fluid flow through the microcapsule shell. Unexpectedly, however, below a threshold NaOH concentration, the microcapsules begin to disintegrate, and eventually rupture; they then expand non-uniformly, ultimately forming large, jellyfish-like structures. Our results highlight the fascinating range of behaviors exhibited by pH-responsive microcapsules, driven by the interplay between electrostatic and mechanical forces.
△ Less
Submitted 31 January, 2014;
originally announced January 2014.
-
Spatial Fluctuations Of Fluid Velocities In Flow Through A Three-Dimensional Porous Medium
Authors:
Sujit S. Datta,
Harry Chiang,
T. S. Ramakrishnan,
David A. Weitz
Abstract:
We use confocal microscopy to directly visualize the spatial fluctuations in fluid flow through a three-dimensional porous medium. We find that the velocity magnitudes and the velocity components both along and transverse to the imposed flow direction are exponentially distributed, even with residual trap** of a second immiscible fluid. Moreover, we find pore-scale correlations in the flow that…
▽ More
We use confocal microscopy to directly visualize the spatial fluctuations in fluid flow through a three-dimensional porous medium. We find that the velocity magnitudes and the velocity components both along and transverse to the imposed flow direction are exponentially distributed, even with residual trap** of a second immiscible fluid. Moreover, we find pore-scale correlations in the flow that are determined by the geometry of the medium. Our results suggest that, despite the considerable complexity of the pore space, fluid flow through it is not completely random.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
Drainage in a model stratified porous medium
Authors:
Sujit S. Datta,
David A. Weitz
Abstract:
We show that when a non-wetting fluid drains a stratified porous medium at sufficiently small capillary numbers Ca, it flows only through the coarsest stratum of the medium; by contrast, above a threshold Ca, the non-wetting fluid is also forced laterally, into part of the adjacent, finer strata. The spatial extent of this partial invasion increases with Ca. We quantitatively understand this behav…
▽ More
We show that when a non-wetting fluid drains a stratified porous medium at sufficiently small capillary numbers Ca, it flows only through the coarsest stratum of the medium; by contrast, above a threshold Ca, the non-wetting fluid is also forced laterally, into part of the adjacent, finer strata. The spatial extent of this partial invasion increases with Ca. We quantitatively understand this behavior by balancing the stratum-scale viscous pressure driving the flow with the capillary pressure required to invade individual pores. Because geological formations are frequently stratified, we anticipate that our results will be relevant to a number of important applications, including understanding oil migration, preventing groundwater contamination, and sub-surface CO$_{2}$ storage.
△ Less
Submitted 22 January, 2013;
originally announced January 2013.
-
arXiv:1301.4883
[pdf]
physics.flu-dyn
cond-mat.dis-nn
cond-mat.mtrl-sci
cond-mat.soft
cond-mat.stat-mech
Visualizing multiphase flow and trapped fluid configurations in a model three-dimensional porous medium
Authors:
Amber T. Krummel,
Sujit S. Datta,
Stefan Münster,
David A. Weitz
Abstract:
We report an approach to fully visualize the flow of two immiscible fluids through a model three-dimensional (3D) porous medium at pore-scale resolution. Using confocal microscopy, we directly image the drainage of the medium by the non-wetting oil and subsequent imbibition by the wetting fluid. During imbibition, the wetting fluid pinches off threads of oil in the narrow crevices of the medium, f…
▽ More
We report an approach to fully visualize the flow of two immiscible fluids through a model three-dimensional (3D) porous medium at pore-scale resolution. Using confocal microscopy, we directly image the drainage of the medium by the non-wetting oil and subsequent imbibition by the wetting fluid. During imbibition, the wetting fluid pinches off threads of oil in the narrow crevices of the medium, forming disconnected oil ganglia. Some of these ganglia remain trapped within the medium. By resolving the full 3D structure of the trapped ganglia, we show that the typical ganglion size, and the total amount of residual oil, decreases as the capillary number Ca increases; this behavior reflects the competition between the viscous pressure in the wetting fluid and the capillary pressure required to force oil through the pores of the medium. This work thus shows how pore-scale fluid dynamics influence the trapped fluid configurations in multiphase flow through 3D porous media.
△ Less
Submitted 21 January, 2013;
originally announced January 2013.
-
arXiv:1209.0758
[pdf, other]
cond-mat.soft
cond-mat.mes-hall
cond-mat.mtrl-sci
cond-mat.stat-mech
physics.bio-ph
physics.flu-dyn
How Does A Porous Shell Collapse? Delayed Buckling And Guided Folding Of Inhomogeneous Capsules
Authors:
Sujit S. Datta,
Shin-Hyun Kim,
Jayson Paulose,
Alireza Abbaspourrad,
David R. Nelson,
David A. Weitz
Abstract:
Colloidal capsules can sustain an external osmotic pressure; however, for a sufficiently large pressure, they will ultimately buckle. This process can be strongly influenced by structural inhomogeneities in the capsule shells. We explore how the time delay before the onset of buckling decreases as the shells are made more inhomogeneous; this behavior can be quantitatively understood by coupling sh…
▽ More
Colloidal capsules can sustain an external osmotic pressure; however, for a sufficiently large pressure, they will ultimately buckle. This process can be strongly influenced by structural inhomogeneities in the capsule shells. We explore how the time delay before the onset of buckling decreases as the shells are made more inhomogeneous; this behavior can be quantitatively understood by coupling shell theory with Darcy's law. In addition, we show that the shell inhomogeneity can dramatically change the folding pathway taken by a capsule after it buckles.
△ Less
Submitted 6 September, 2012; v1 submitted 3 September, 2012;
originally announced September 2012.
-
Capillary micromechanics: Measuring the elasticity of microscopic soft objects
Authors:
Hans M. Wyss,
Thomas Franke,
Elisa Mele,
David A. Weitz
Abstract:
We present a simple method for accessing the elastic properties of microscopic deformable particles. This method is based on measuring the pressure-induced deformation of soft particles as they are forced through a tapered glass microcapillary. It allows us to determine both the compressive and the shear modulus of a deformable object in one single experiment. Measurements on a model system of pol…
▽ More
We present a simple method for accessing the elastic properties of microscopic deformable particles. This method is based on measuring the pressure-induced deformation of soft particles as they are forced through a tapered glass microcapillary. It allows us to determine both the compressive and the shear modulus of a deformable object in one single experiment. Measurements on a model system of poly-acrylamide microgel particles exhibit excellent agreement with measurements on bulk gels of identical composition. Our approach is applicable over a wide range of mechanical properties and should thus be a valuable tool for the characterization of a variety of soft and biological materials.
△ Less
Submitted 31 August, 2012;
originally announced September 2012.
-
Corrugated interfaces in multiphase core-annular flow
Authors:
Ho Cheung Shum,
Alban Sauret,
Alberto Fernandez-nieves,
Howard A. Stone,
David A. Weitz
Abstract:
Microfluidic devices can be used to produce highly controlled and monodisperse double or multiple emulsions. The presence of inner drops inside a jet of the middle phase introduces deformations in the jet, which leads to breakup into monodisperse double emulsions. However, the ability to generate double emulsions can be compromised when the interfacial tension between the middle and outer phases i…
▽ More
Microfluidic devices can be used to produce highly controlled and monodisperse double or multiple emulsions. The presence of inner drops inside a jet of the middle phase introduces deformations in the jet, which leads to breakup into monodisperse double emulsions. However, the ability to generate double emulsions can be compromised when the interfacial tension between the middle and outer phases is low, leading to flow with high capillary and Weber numbers. In this case, the interface between the fluids is initially deformed by the inner drops but the jet does not break into drops. Instead, the jet becomes highly corrugated, which prevents formation of controlled double emulsions. We show using numerical calculations that the corrugations are caused by the inner drops perturbing the interface and the perturbations are then advected by the flow into complex shapes.
△ Less
Submitted 23 April, 2012;
originally announced April 2012.
-
Rheology of Attractive Emulsions
Authors:
Sujit S. Datta,
Dustin D. Gerrard,
Travers S. Rhodes,
Thomas G. Mason,
David A. Weitz
Abstract:
We show how attractive interactions dramatically influence emulsion rheology. Unlike the repulsive case, attractive emulsions below random close packing, RCP, can form soft gel-like elastic solids. However, above RCP, attractive and repulsive emulsions have similar elasticities. Such compressed attractive emulsions undergo an additional shear-driven relaxation process during yielding. Our results…
▽ More
We show how attractive interactions dramatically influence emulsion rheology. Unlike the repulsive case, attractive emulsions below random close packing, RCP, can form soft gel-like elastic solids. However, above RCP, attractive and repulsive emulsions have similar elasticities. Such compressed attractive emulsions undergo an additional shear-driven relaxation process during yielding. Our results suggest that attractive emulsions begin to yield at weak points through the breakage of bonds, and, above RCP, also undergo droplet configurational rearrangements.
△ Less
Submitted 12 January, 2012;
originally announced January 2012.
-
Skating on a Film of Air: Drops Impacting on a Surface
Authors:
John M. Kolinski,
Shmuel M. Rubinstein,
Shreyas Mandre,
Michael P. Brenner,
David A. Weitz,
L. Mahadevan
Abstract:
Drops impacting on a surface are ubiquitous in our everyday experience. This impact is understood within a commonly accepted hydrodynamic picture: it is initiated by a rapid shock and a subsequent ejection of a sheet leading to beautiful splashing patterns. However, this picture ignores the essential role of the air that is trapped between the impacting drop and the surface. Here we describe a new…
▽ More
Drops impacting on a surface are ubiquitous in our everyday experience. This impact is understood within a commonly accepted hydrodynamic picture: it is initiated by a rapid shock and a subsequent ejection of a sheet leading to beautiful splashing patterns. However, this picture ignores the essential role of the air that is trapped between the impacting drop and the surface. Here we describe a new imaging modality that is sensitive to the behavior right at the surface. We show that a very thin film of air, only a few tens of nanometers thick, remains trapped between the falling drop and the surface as the drop spreads. The thin film of air serves to lubricate the drop enabling the fluid to skate on the air film laterally outward at surprisingly high velocities, consistent with theoretical predictions. Eventually this thin film of air must break down as the fluid wets the surface. We suggest that this occurs in a spinodal-like fashion, and causes a very rapid spreading of a wetting front outwards; simultaneously the wetting fluid spreads inward much more slowly, trap** a bubble of air within the drop. Our results show that the dynamics of impacting drops are much more complex than previously thought and exhibit a rich array of unexpected phenomena that require rethinking classical paradigms.
△ Less
Submitted 23 October, 2011; v1 submitted 14 October, 2011;
originally announced October 2011.
-
Controlled Buckling and Crumpling of Nanoparticle-Coated Droplets
Authors:
Sujit S. Datta,
Ho Cheung Shum,
David A. Weitz
Abstract:
We introduce a new experimental approach to study the structural transitions of large numbers of nanoparticle-coated droplets as their volume is reduced. We use an emulsion system where the dispersed phase is slightly soluble in the continuous phase. By adding a fixed amount of unsaturated continuous phase, the volume of the droplets can be controllably reduced, causing them to buckle or crumple,…
▽ More
We introduce a new experimental approach to study the structural transitions of large numbers of nanoparticle-coated droplets as their volume is reduced. We use an emulsion system where the dispersed phase is slightly soluble in the continuous phase. By adding a fixed amount of unsaturated continuous phase, the volume of the droplets can be controllably reduced, causing them to buckle or crumple, thereby becoming nonspherical. The resultant morphologies depend both on the extent of volume reduction and the average droplet size. The buckling and crumpling behavior implies that the droplet surfaces are solid.
△ Less
Submitted 18 November, 2010;
originally announced November 2010.
-
Cross-link governed dynamics of biopolymer networks
Authors:
Chase P. Broedersz,
Martin Depken,
Norman Y. Yao,
Martin R. Pollak,
David A. Weitz,
Frederick C. MacKintosh
Abstract:
Cytoskeletal networks of biopolymers are cross-linked by a variety of proteins. Experiments have shown that dynamic cross-linking with physiological linker proteins leads to complex stress relaxation and enables network flow at long times. We present a model for the mechanical properties of transient networks. By a combination of simulations and analytical techniques we show that a single microsco…
▽ More
Cytoskeletal networks of biopolymers are cross-linked by a variety of proteins. Experiments have shown that dynamic cross-linking with physiological linker proteins leads to complex stress relaxation and enables network flow at long times. We present a model for the mechanical properties of transient networks. By a combination of simulations and analytical techniques we show that a single microscopic timescale for cross-linker unbinding leads to a broad spectrum of macroscopic relaxation times, resulting in a weak power-law dependence of the shear modulus on frequency. By performing rheological experiments, we demonstrate that our model quantitatively describes the frequency behavior of actin network cross-linked with $α$-Actinin-$4$ over four decades in frequency.
△ Less
Submitted 5 July, 2010; v1 submitted 20 June, 2010;
originally announced June 2010.
-
Drying of complex suspensions
Authors:
Lei Xu,
Alexis Bergés,
Peter J. Lu,
André R. Studart,
Andrew B. Schofield,
Hidekazu Oki,
Simon Davies,
David A. Weitz
Abstract:
We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the surrounding porous particle pack at a rate proportional to the square of the droplet radius. By contrast, small droplets do not collapse, but remain intact and are…
▽ More
We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the surrounding porous particle pack at a rate proportional to the square of the droplet radius. By contrast, small droplets do not collapse, but remain intact and are merely deformed. A simple model coupling the Laplace pressure to Darcy's law correctly estimates both the threshold radius separating these two behaviors, and the rate of large-droplet evacuation. Finally, we use these systems to make novel hierarchical structures.
△ Less
Submitted 31 March, 2010;
originally announced March 2010.
-
Dynamics of drying in 3D porous media
Authors:
Lei Xu,
Simon Davies,
Andrew B. Schofield,
David A. Weitz
Abstract:
The drying dynamics in three dimensional porous media are studied with confocal microscopy. We observe abrupt air invasions in size from single particle to hundreds of particles. We show that these result from the strong flow from menisci in large pores to menisci in small pores during drying. This flow causes air invasions to start in large menisci and subsequently spread throughout the entire…
▽ More
The drying dynamics in three dimensional porous media are studied with confocal microscopy. We observe abrupt air invasions in size from single particle to hundreds of particles. We show that these result from the strong flow from menisci in large pores to menisci in small pores during drying. This flow causes air invasions to start in large menisci and subsequently spread throughout the entire system. We measure the size and structure of the air invasions and show that they are in accord with invasion percolation. By varying the particle size and contact angle we unambiguously demonstrate that capillary pressure dominates the drying process.
△ Less
Submitted 29 July, 2008;
originally announced July 2008.