-
Attoliter Mie Void Sensing
Authors:
Serkan Arslan,
Micha Kappel,
Adrià Canós Valero,
Thu Huong T. Tran,
Julian Karst,
Philipp Christ,
Ulrich Hohenester,
Thomas Weiss,
Harald Giessen,
Mario Hentschel
Abstract:
Traditional nanophotonic sensing schemes utilize evanescent fields in dielectric or metallic nanoparticles, which confine far-field radiation in dispersive and lossy media. Apart from the lack of a well-defined sensing volume that can be accompanied by moderate sensitivities, these structures suffer from the generally limited access to the modal field, which is key for sensing performance. Recentl…
▽ More
Traditional nanophotonic sensing schemes utilize evanescent fields in dielectric or metallic nanoparticles, which confine far-field radiation in dispersive and lossy media. Apart from the lack of a well-defined sensing volume that can be accompanied by moderate sensitivities, these structures suffer from the generally limited access to the modal field, which is key for sensing performance. Recently, a novel strategy for dielectric nanophotonics has been demonstrated, namely, the resonant confinement of light in air. So-called Mie voids created in high-index dielectric host materials support localized resonant modes with exceptional properties. In particular, due to the confinement in air, these structures benefit from the full access to the modal field inside the void. We utilize these Mie voids for refractive index sensing in single voids with volumes down to 100 attoliters and sensitivities on the order of 400 nm per refractive index unit. Taking the signal-to-noise ratio of our measurements into account, we demonstrate detection of refractive index changes as small as 6.9 x 10-4 in a defined volume of just 850 attoliters. The combination of our Mie void sensor platform with appropriate surface functionalization will even enable specificity to biological or other analytes of interest, as the sensing volumes are on the order of cellular signaling chemicals of single vesicles in cellular synapses.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
A fixed phase tunable directional coupler based on coupling tuning
Authors:
Yang Yang,
Tim Weiss,
Hamed Arianfard,
Akram Youssry,
Alberto Peruzzo
Abstract:
The field of photonic integrated circuits has witnessed significant progress in recent years, with a growing demand for devices that offer high-performance reconfigurability. Due to the inability of conventional tunable directional couplers (TDCs) to maintain a fixed phase while tuning the reflectivity, Mach-Zehnder interferometers (MZIs) are employed as the primary building blocks for reflectivit…
▽ More
The field of photonic integrated circuits has witnessed significant progress in recent years, with a growing demand for devices that offer high-performance reconfigurability. Due to the inability of conventional tunable directional couplers (TDCs) to maintain a fixed phase while tuning the reflectivity, Mach-Zehnder interferometers (MZIs) are employed as the primary building blocks for reflectivity tuning in constructing large-scale circuits. However, MZIs are prone to fabrication errors due to the need for perfect balanced directional couplers to achieve 0-1 reflectivity, which hinders their scalability. In this study, we introduce a design of a TDC based on coupling constant tuning in the thin film Lithium Niobate platform and present an optimized design. Our optimized TDC design enables arbitrary reflectivity tuning while ensuring a consistent phase across a wide range of operating wavelengths. Furthermore, it exhibits fewer bending sections than MZIs and is inherently resilient to fabrication errors in waveguide geometry and coupling length compared to both MZIs and conventional TDCs. Our work contributes to develo** high-performance photonic integrated circuits with implications for various fields, including optical communication systems and quantum information processing.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Deep Learning Based Event Reconstruction for Cyclotron Radiation Emission Spectroscopy
Authors:
A. Ashtari Esfahani,
S. Böser,
N. Buzinsky,
M. C. Carmona-Benitez,
R. Cervantes,
C. Claessens,
L. de Viveiros,
M. Fertl,
J. A. Formaggio,
J. K. Gaison,
L. Gladstone,
M. Grando,
M. Guigue,
J. Hartse,
K. M. Heeger,
X. Huyan,
A. M. Jones,
K. Kazkaz,
M. Li,
A. Lindman,
A. Marsteller,
C. Matthé,
R. Mohiuddin,
B. Monreal,
E. C. Morrison
, et al. (26 additional authors not shown)
Abstract:
The objective of the Cyclotron Radiation Emission Spectroscopy (CRES) technology is to build precise particle energy spectra. This is achieved by identifying the start frequencies of charged particle trajectories which, when exposed to an external magnetic field, leave semi-linear profiles (called tracks) in the time-frequency plane. Due to the need for excellent instrumental energy resolution in…
▽ More
The objective of the Cyclotron Radiation Emission Spectroscopy (CRES) technology is to build precise particle energy spectra. This is achieved by identifying the start frequencies of charged particle trajectories which, when exposed to an external magnetic field, leave semi-linear profiles (called tracks) in the time-frequency plane. Due to the need for excellent instrumental energy resolution in application, highly efficient and accurate track reconstruction methods are desired. Deep learning convolutional neural networks (CNNs) - particularly suited to deal with information-sparse data and which offer precise foreground localization - may be utilized to extract track properties from measured CRES signals (called events) with relative computational ease. In this work, we develop a novel machine learning based model which operates a CNN and a support vector machine in tandem to perform this reconstruction. A primary application of our method is shown on simulated CRES signals which mimic those of the Project 8 experiment - a novel effort to extract the unknown absolute neutrino mass value from a precise measurement of tritium $β^-$-decay energy spectrum. When compared to a point-clustering based technique used as a baseline, we show a relative gain of 24.1% in event reconstruction efficiency and comparable performance in accuracy of track parameter reconstruction.
△ Less
Submitted 5 January, 2024;
originally announced February 2024.
-
Quasi-Babinet principle in dielectric resonators and Mie voids
Authors:
Masoud Hamidi,
Kirill Koshelev,
Sergei Gladyshev,
Adrià Canós Valero,
Mario Hentschel,
Harald Giessen,
Yuri Kivshar,
Thomas Weiss
Abstract:
Advancing resonant nanophotonics requires novel building blocks. Recently, cavities in high-index dielectrics have been shown to resonantly confine light inside a lower-index region. These so-called Mie voids represent a counterpart to solid high-index dielectric Mie resonators, offering novel functionality such as resonant behavior in the ultraviolet spectral region. However, the well-known and h…
▽ More
Advancing resonant nanophotonics requires novel building blocks. Recently, cavities in high-index dielectrics have been shown to resonantly confine light inside a lower-index region. These so-called Mie voids represent a counterpart to solid high-index dielectric Mie resonators, offering novel functionality such as resonant behavior in the ultraviolet spectral region. However, the well-known and highly useful Babinet's principle, which relates the scattering of solid and inverse structures, is not strictly applicable for this dielectric case as it is only valid for infinitesimally thin perfect electric conductors. Here, we show that Babinet's principle can be generalized to dielectric systems within certain boundaries, which we refer to as the quasi-Babinet principle and demonstrate for spherical and more generically shaped Mie resonators. Limitations arise due to geometry-dependent terms as well as material frequency dispersion and losses. Thus, our work not only offers deeper physical insight into the working mechanism of these systems but also establishes simple design rules for constructing dielectric resonators with complex functionalities from their complementary counterparts.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Impact of coordinate frames on mode formation in twisted waveguides
Authors:
Johannes Bürger,
Adrià Canós Valero,
Thomas Weiss,
Stefan A. Maier,
Markus A. Schmidt
Abstract:
Off-axis twisted waveguides possess unique optical properties such as circular and orbital angular momentum (OAM) birefringence, setting them apart from their straight counterparts. Analyzing mode formation in such helical waveguides relies on the use of specific coordinate frames that follow the twist of the structure, making the waveguide invariant along one of the new coordinates. In this study…
▽ More
Off-axis twisted waveguides possess unique optical properties such as circular and orbital angular momentum (OAM) birefringence, setting them apart from their straight counterparts. Analyzing mode formation in such helical waveguides relies on the use of specific coordinate frames that follow the twist of the structure, making the waveguide invariant along one of the new coordinates. In this study, the differences between modes forming in high-contrast off-axis twisted waveguides defined in the three most important coordinate systems - the Frenet-Serret, the helicoidal, or the Overfelt frame - are investigated through numerical simulations. We explore modal characteristics up to high twist rates (pitch: 50 $μ$m) and clarify a transformation allowing to map the modal fields and the effective index back to the laboratory frame.
In case the waveguide is single-mode, the fundamental modes of the three types of waveguides show significant differences in terms of birefringence, propagation loss, and polarization. Conversely, the modal characteristics of the investigated waveguides are comparable in the multimode domain. Furthermore, our study examines the impact of twisting on spatial mode properties with the results suggesting a potential influence of the photonic spin Hall and orbital Hall effects. Additionally, modes of single-mode helical waveguides were found to exhibit superchiral fields on their surfaces.
Implementation approaches such as 3D-nanoprinting or fiber-preform twisting open the doors to potential applications of such highly twisted waveguides, including chip-integrated devices for broadband spin- and OAM-preserving optical signal transport, as well as applications in chiral spectroscopy or nonlinear frequency conversion.
△ Less
Submitted 5 April, 2024; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Real-time Signal Detection for Cyclotron Radiation Emission Spectroscopy Measurements using Antenna Arrays
Authors:
A. Ashtari Esfahani,
S. Böser,
N. Buzinsky,
M. C. Carmona-Benitez,
C. Claessens,
L. de Viveiros,
M. Fertl,
J. A. Formaggio,
B. T. Foust,
J. K. Gaison,
M. Grando,
J. Hartse,
K. M. Heeger,
X. Huyan,
A. M. Jones,
B. J. P. Jones,
K. Kazkaz,
B. H. LaRoque,
M. Li,
A. Lindman,
A. Marsteller,
C. Matthé,
R. Mohiuddin,
B. Monreal,
B. Mucogllava
, et al. (26 additional authors not shown)
Abstract:
Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for precision measurement of the energies of charged particles, which is being developed by the Project 8 Collaboration to measure the neutrino mass using tritium beta-decay spectroscopy. Project 8 seeks to use the CRES technique to measure the neutrino mass with a sensitivity of 40~meV, requiring a large supply of tritium atoms store…
▽ More
Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for precision measurement of the energies of charged particles, which is being developed by the Project 8 Collaboration to measure the neutrino mass using tritium beta-decay spectroscopy. Project 8 seeks to use the CRES technique to measure the neutrino mass with a sensitivity of 40~meV, requiring a large supply of tritium atoms stored in a multi-cubic meter detector volume. Antenna arrays are one potential technology compatible with an experiment of this scale, but the capability of an antenna-based CRES experiment to measure the neutrino mass depends on the efficiency of the signal detection algorithms. In this paper, we develop efficiency models for three signal detection algorithms and compare them using simulations from a prototype antenna-based CRES experiment as a case-study. The algorithms include a power threshold, a matched filter template bank, and a neural network based machine learning approach, which are analyzed in terms of their average detection efficiency and relative computational cost. It is found that significant improvements in detection efficiency and, therefore, neutrino mass sensitivity are achievable, with only a moderate increase in computation cost, by utilizing either the matched filter or machine learning approach in place of a power threshold, which is the baseline signal detection algorithm used in previous CRES experiments by Project 8.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
Exceptional Bound States in the Continuum
Authors:
Adrià Canós Valero,
Z. Sztranyovszky,
E. A. Muljarov,
Andrey Bogdanov,
Thomas Weiss
Abstract:
Bound states in the continuum (BICs) and exceptional points (EPs) are unique singularities of non-Hermitian systems. BICs demonstrate enhancement of the electromagnetic field at the nanoscale, while EPs exhibit high sensitivity to small perturbations. Here, we demonstrate that several BICs can be merged into one EP, forming an EP-BIC. The resulting state inherits properties from both BICs and EP,…
▽ More
Bound states in the continuum (BICs) and exceptional points (EPs) are unique singularities of non-Hermitian systems. BICs demonstrate enhancement of the electromagnetic field at the nanoscale, while EPs exhibit high sensitivity to small perturbations. Here, we demonstrate that several BICs can be merged into one EP, forming an EP-BIC. The resulting state inherits properties from both BICs and EP, namely, it does not radiate and shows extremely high sensitivity to perturbations. We validate the developed theory with numerical simulations and demonstrate the formation of second and third-order EP-BICs in stacked dielectric metasurfaces. We also show that the losses of the resulting leaky resonances exhibit an anomalous behavior when the unit cell is broken, which differs from the asymptotics commonly attributed to BICs.
△ Less
Submitted 8 March, 2024; v1 submitted 4 September, 2023;
originally announced September 2023.
-
CuIn(Se,Te)2 absorbers with bandgaps < 1 eV for bottom cells in tandem applications
Authors:
Thomas Paul Weiss,
Mohit Sood,
Aline Vanderhaegen,
Susanne Siebentritt
Abstract:
Thin-film solar cells reach high efficiencies and have a low carbon footprint in production. Tandem solar cells have the potential to significantly increase the efficiency of this technology, where the bottom-cell is generally composed of a Cu(In,Ga)Se2 absorber layer with bandgaps around 1 eV or higher. Here, we investigate CuIn(Se1-xTex)2 absorber layers and solar cells with bandgaps below 1 eV,…
▽ More
Thin-film solar cells reach high efficiencies and have a low carbon footprint in production. Tandem solar cells have the potential to significantly increase the efficiency of this technology, where the bottom-cell is generally composed of a Cu(In,Ga)Se2 absorber layer with bandgaps around 1 eV or higher. Here, we investigate CuIn(Se1-xTex)2 absorber layers and solar cells with bandgaps below 1 eV, which will bring the benefit of an additional degree of freedom for designing current-matched 2-terminal tandem devices. We report that CuIn(Se1-xTex)2 thin films can be grown single phase by co-evaporation and that the bandgap can be reduced to the optimum range for a bottom cell (0.92 - 0.95 eV). From photoluminescence spectroscopy it is found that no additional non-radiative losses are introduced to the absorber. However, Voc losses occur in the final solar cell due to non-optimised interfaces. Nevertheless, a record device with 9 % power conversion efficiency is demonstrated with a bandgap of 0.96 eV and x=0.15. Interface recombination is identified as a major recombination channel for larger Te contents. Thus, further efficiency improvements are anticipated for improved absorber/buffer interfaces.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
Inverse Design of All-dielectric Metasurfaces with Bound States in the Continuum
Authors:
Sergei Gladyshev,
Theodosios D. Karamanos,
Lina Kuhn,
Dominik Beutel,
Thomas Weiss,
Carsten Rockstuhl,
Andrey Bogdanov
Abstract:
Metasurfaces with bound states in the continuum (BICs) have proven to be a powerful platform for drastically enhancing light-matter interactions, improving biosensing, and precisely manipulating near- and far-fields. However, engineering metasurfaces to provide an on-demand spectral and angular position for a BIC remains a prime challenge. A conventional solution involves a fine adjustment of geom…
▽ More
Metasurfaces with bound states in the continuum (BICs) have proven to be a powerful platform for drastically enhancing light-matter interactions, improving biosensing, and precisely manipulating near- and far-fields. However, engineering metasurfaces to provide an on-demand spectral and angular position for a BIC remains a prime challenge. A conventional solution involves a fine adjustment of geometrical parameters, requiring multiple time-consuming calculations. In this work, to circumvent such tedious processes, we develop a physics-inspired, inverse design method on all-dielectric metasurfaces for an on-demand spectral and angular position of a BIC. Our suggested method predicts the core-shell particles that constitute the unit cell of the metasurface, while considering practical limitations on geometry and available materials. Our method is based on a smart combination of a semi-analytical solution, for predicting the required dipolar Mie coefficients of the meta-atom, and a machine learning algorithm, for finding a practical design of the meta-atom that provides these Mie coefficients. Although our approach is exemplified in designing a metasurface sustaining a BIC, it can, also, be applied to many more objective functions. With that, we pave the way toward a general framework for the inverse design of metasurfaces in specific and nanophotonic structures in general.
△ Less
Submitted 17 May, 2023; v1 submitted 17 May, 2023;
originally announced May 2023.
-
SYNCA: A Synthetic Cyclotron Antenna for the Project 8 Collaboration
Authors:
A. Ashtari Esfahani,
S. Böser,
N. Buzinsky,
M. C. Carmona-Benitez,
C. Claessens,
L. de Viveiros,
M. Fertl,
J. A. Formaggio,
L. Gladstone,
M. Grando,
J. Hartse,
K. M. Heeger,
X. Huyan,
A. M. Jones,
K. Kazkaz,
M. Li,
A. Lindman,
C. Matthé,
R. Mohiuddin,
B. Monreal,
R. Mueller,
J. A. Nikkel,
E. Novitski,
N. S. Oblath,
J. I. Peña
, et al. (20 additional authors not shown)
Abstract:
Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a magnetic field. The Project 8 collaboration is develo** a next-generation neutrino mass measurement experiment based on CRES. One approach is to use a phased antenn…
▽ More
Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a magnetic field. The Project 8 collaboration is develo** a next-generation neutrino mass measurement experiment based on CRES. One approach is to use a phased antenna array, which surrounds a volume of tritium gas, to detect and measure the cyclotron radiation of the resulting $β$-decay electrons. To validate the feasibility of this method, Project 8 has designed a test stand to benchmark the performance of an antenna array at reconstructing signals that mimic those of genuine CRES events. To generate synthetic CRES events, a novel probe antenna has been developed, which emits radiation with characteristics similar to the cyclotron radiation produced by charged particles in magnetic fields. This paper outlines the design, construction, and characterization of this Synthetic Cyclotron Antenna (SYNCA). Furthermore, we perform a series of measurements that use the SYNCA to test the position reconstruction capabilities of the digital beamforming reconstruction technique. We find that the SYNCA produces radiation with characteristics closely matching those expected for cyclotron radiation and reproduces experimentally the phenomenology of digital beamforming simulations of true CRES signals.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Dielectric Mie Voids: Confining Light in Air
Authors:
Mario Hentschel,
Kirill Koshelev,
Florian Sterl,
Steffen Both,
Julian Karst,
Lida Shamsafar,
Thomas Weiss,
Yuri Kivshar,
Harald Giessen
Abstract:
Manipulating light on the nanoscale has become a central challenge in metadevices, resonant surfaces, nanoscale optical sensors, and many more, and it is largely based on resonant light confinement in dispersive and lossy metals and dielectrics. Here, we experimentally implement a novel strategy for dielectric nanophotonics: Resonant subwavelength confinement of light in air. We demonstrate that v…
▽ More
Manipulating light on the nanoscale has become a central challenge in metadevices, resonant surfaces, nanoscale optical sensors, and many more, and it is largely based on resonant light confinement in dispersive and lossy metals and dielectrics. Here, we experimentally implement a novel strategy for dielectric nanophotonics: Resonant subwavelength confinement of light in air. We demonstrate that voids created in high-index dielectric host materials support localized resonant modes with exceptional optical properties. Due to the confinement in air, the modes do not suffer from the loss and dispersion of the dielectric host medium. We experimentally realize these resonant Mie voids by focused ion beam milling into bulk silicon wafers and experimentally demonstrate resonant light confinement down to the UV spectral range at 265 nm (4.68 eV). Furthermore, we utilize the bright, intense, and naturalistic colours for nanoscale colour printing. The combination of resonant dielectric Mie voids with dielectric nanoparticles will more than double the parameter space for the future design of metasurfaces and other micro- and nanoscale optical elements and push their operation into the blue and UV spectral range. In particular, this extension will enable novel antenna and structure designs which benefit from the full access to the modal field inside the void as well as the nearly free choice of the high-index material.
△ Less
Submitted 16 May, 2022;
originally announced May 2022.
-
Metastable defects decrease the fill factor of solar cells
Authors:
Thomas Paul Weiss,
Omar Ramírez,
Stefan Paetel,
Wolfram Witte,
Jiro Nishinaga,
Thomas Feurer,
Susanne Siebentritt
Abstract:
Cu(In,Ga)Se2 based solar cells exceed power conversion efficiencies of 23 %. Yet, the fill factor of these solar cells, with best values around 80 %, is relatively low (Si reaches 84.9%) mostly due to diode factors greater than one. Recently, we proposed metastable defects, a general feature of the Cu(In,Ga)Se2 alloy, to be the origin of the increased diode factor. We measure the diode factor of t…
▽ More
Cu(In,Ga)Se2 based solar cells exceed power conversion efficiencies of 23 %. Yet, the fill factor of these solar cells, with best values around 80 %, is relatively low (Si reaches 84.9%) mostly due to diode factors greater than one. Recently, we proposed metastable defects, a general feature of the Cu(In,Ga)Se2 alloy, to be the origin of the increased diode factor. We measure the diode factor of the bare absorber layers by excitation-dependent photoluminescence. For high quality and thus high luminescent polycrystalline absorbers, we evaluate the diode factor excitation dependence over four orders of magnitude. Using simulations and the model of metastable defects, we can well describe the experimental findings on n- and p-type epitaxial films as well as the polycrystalline absorbers, providing additional evidence for this model. We find that the diode factors measured optically by photoluminescence impose a lower limit for the diode factor measured electrically on a finished solar cell. Interestingly, the lowest diode factor (optical and electrical) and consequently highest fill factor of 81.0 % is obtained by Ag alloying, i.e. an (Ag,Cu)(In,Ga)Se2 absorber. This finding hints to a pathway to increase fill factors and thus efficiencies for Cu(In,Ga)Se2-based solar cells.
△ Less
Submitted 26 April, 2022;
originally announced May 2022.
-
How much gallium do we need for a p-type Cu(In,Ga)Se2?
Authors:
Omar Ramírez,
Evandro Martin Lanzoni,
Ricardo G. Poeira,
Thomas P. Weiss,
Renaud Leturcq,
Alex Redinger,
Susanne Siebentritt
Abstract:
Do** in the chalcopyrite Cu(In,Ga)Se2 is determined by intrinsic point defects. In the ternary CuInSe2, both N-type and P-type conductivity can be obtained depending on the growth conditions and stoichiometry: N-type is obtained when grown Cu-poor, Se-poor and alkali-free. CuGaSe2, on the other hand, is found to be always a P-type semiconductor that seems to resist all kinds of N-type do** no…
▽ More
Do** in the chalcopyrite Cu(In,Ga)Se2 is determined by intrinsic point defects. In the ternary CuInSe2, both N-type and P-type conductivity can be obtained depending on the growth conditions and stoichiometry: N-type is obtained when grown Cu-poor, Se-poor and alkali-free. CuGaSe2, on the other hand, is found to be always a P-type semiconductor that seems to resist all kinds of N-type do** no matter whether it comes from native defects or extrinsic impurities. In this contribution, we study the N-to-P transition in Cu-poor Cu(In,Ga)Se2 single crystals in dependence of the gallium content. Our results show that Cu(In,Ga)Se2 can still be grown as an N-type semiconductor until the gallium content reaches the critical concentration of 15-19%, where the N-to-P transition occurs. Furthermore, trends in the Seebeck coefficient and activation energies extracted from temperature-dependent conductivity measurements, demonstrate that the carrier concentration drops by around two orders of magnitude near the transition concentration. Our proposed model explains the N-to-P transition based on the differences in formation energies of donor and acceptor defects caused by the addition of gallium.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Solar cell efficiency, diode factor and interface recombination: insights from photoluminescence
Authors:
T. Wang,
F. Ehre,
T. P. Weiss,
B. Veith-Wolf,
V. Titova,
N. Valle,
M. Melchiorre,
J. Schmidt,
S. Siebentritt
Abstract:
Metastable defects can decisively influence the diode factor and thus the efficiency of a solar cell. The diode factor is also influenced by the do** level and the recombination mechanisms in the solar cell. Here we quantify how the various parameters change the diode factor by photoluminescence measurements and simulations. In addition, we show that backside recombination reduces the open circu…
▽ More
Metastable defects can decisively influence the diode factor and thus the efficiency of a solar cell. The diode factor is also influenced by the do** level and the recombination mechanisms in the solar cell. Here we quantify how the various parameters change the diode factor by photoluminescence measurements and simulations. In addition, we show that backside recombination reduces the open circuit voltage in CuInSe2 solar cells by more than 40 mV. Passivation by a Ga gradient is shown to be as efficient as a passivation by dielectric layers. Increased backside recombination reduces the diode factor, not because of less metastable defect transformation but because of a sublinear increase in photo generated carriers with excitation. This reduction in diode factor is unwanted, since the increased recombination reduces the voltage. A higher do** level, on the other hand, reduces the diode factor, thereby increasing the fill factor, and at the same time increases the voltage.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
The Project 8 Neutrino Mass Experiment
Authors:
Project 8 Collaboration,
A. Ashtari Esfahani,
S. Böser,
N. Buzinsky,
M. C. Carmona-Benitez,
C. Claessens,
L. de Viveiros,
P. J. Doe,
S. Enomoto,
M. Fertl,
J. A. Formaggio,
J. K. Gaison,
M. Grando,
K. M. Heeger,
X. Huyan,
A. M. Jones,
K. Kazkaz,
M. Li,
A. Lindman,
C. Matthé,
R. Mohiuddin,
B. Monreal,
R. Mueller,
J. A. Nikkel,
E. Novitski
, et al. (23 additional authors not shown)
Abstract:
Measurements of the $β^-$ spectrum of tritium give the most precise direct limits on neutrino mass. Project 8 will investigate neutrino mass using Cyclotron Radiation Emission Spectroscopy (CRES) with an atomic tritium source. CRES is a new experimental technique that has the potential to surmount the systematic and statistical limitations of current-generation direct measurement methods. Atomic t…
▽ More
Measurements of the $β^-$ spectrum of tritium give the most precise direct limits on neutrino mass. Project 8 will investigate neutrino mass using Cyclotron Radiation Emission Spectroscopy (CRES) with an atomic tritium source. CRES is a new experimental technique that has the potential to surmount the systematic and statistical limitations of current-generation direct measurement methods. Atomic tritium avoids an irreducible systematic uncertainty associated with the final states populated by the decay of molecular tritium. Project 8 will proceed in a phased approach toward a goal of 40 meV/c$^2$ neutrino-mass sensitivity.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
White Paper on Light Sterile Neutrino Searches and Related Phenomenology
Authors:
M. A. Acero,
C. A. Argüelles,
M. Hostert,
D. Kalra,
G. Karagiorgi,
K. J. Kelly,
B. Littlejohn,
P. Machado,
W. Pettus,
M. Toups,
M. Ross-Lonergan,
A. Sousa,
P. T. Surukuchi,
Y. Y. Y. Wong,
W. Abdallah,
A. M. Abdullahi,
R. Akutsu,
L. Alvarez-Ruso,
D. S. M. Alves,
A. Aurisano,
A. B. Balantekin,
J. M. Berryman,
T. Bertólez-Martínez,
J. Brunner,
M. Blennow
, et al. (147 additional authors not shown)
Abstract:
This white paper provides a comprehensive review of our present understanding of experimental neutrino anomalies that remain unresolved, charting the progress achieved over the last decade at the experimental and phenomenological level, and sets the stage for future programmatic prospects in addressing those anomalies. It is purposed to serve as a guiding and motivational "encyclopedic" reference,…
▽ More
This white paper provides a comprehensive review of our present understanding of experimental neutrino anomalies that remain unresolved, charting the progress achieved over the last decade at the experimental and phenomenological level, and sets the stage for future programmatic prospects in addressing those anomalies. It is purposed to serve as a guiding and motivational "encyclopedic" reference, with emphasis on needs and options for future exploration that may lead to the ultimate resolution of the anomalies. We see the main experimental, analysis, and theory-driven thrusts that will be essential to achieving this goal being: 1) Cover all anomaly sectors -- given the unresolved nature of all four canonical anomalies, it is imperative to support all pillars of a diverse experimental portfolio, source, reactor, decay-at-rest, decay-in-flight, and other methods/sources, to provide complementary probes of and increased precision for new physics explanations; 2) Pursue diverse signatures -- it is imperative that experiments make design and analysis choices that maximize sensitivity to as broad an array of these potential new physics signatures as possible; 3) Deepen theoretical engagement -- priority in the theory community should be placed on development of standard and beyond standard models relevant to all four short-baseline anomalies and the development of tools for efficient tests of these models with existing and future experimental datasets; 4) Openly share data -- Fluid communication between the experimental and theory communities will be required, which implies that both experimental data releases and theoretical calculations should be publicly available; and 5) Apply robust analysis techniques -- Appropriate statistical treatment is crucial to assess the compatibility of data sets within the context of any given model.
△ Less
Submitted 17 May, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Viterbi Decoding of CRES Signals in Project 8
Authors:
A. Ashtari Esfahani,
Z. Bogorad,
S. Böser,
N. Buzinsky,
C. Claessens,
L. de Viveiros,
M. Fertl,
J. A. Formaggio,
L. Gladstone,
M. Grando,
M. Guigue,
J. Hartse,
K. M. Heeger,
X. Huyan,
J. Johnston,
A. M. Jones,
K. Kazkaz,
B. H. LaRoque,
M. Li,
A. Lindman,
C. Matthé,
R. Mohiuddin,
B. Monreal,
J. A. Nikkel,
E. Novitski
, et al. (23 additional authors not shown)
Abstract:
Cyclotron Radiation Emission Spectroscopy (CRES) is a modern approach for determining charged particle energies via high-precision frequency measurements of the emitted cyclotron radiation. For CRES experiments with gas within the fiducial volume, signal and noise dynamics can be modelled by a hidden Markov model. We introduce a novel application of the Viterbi algorithm in order to derive informa…
▽ More
Cyclotron Radiation Emission Spectroscopy (CRES) is a modern approach for determining charged particle energies via high-precision frequency measurements of the emitted cyclotron radiation. For CRES experiments with gas within the fiducial volume, signal and noise dynamics can be modelled by a hidden Markov model. We introduce a novel application of the Viterbi algorithm in order to derive informational limits on the optimal detection of cyclotron radiation signals in this class of gas-filled CRES experiments, thereby providing concrete limits from which future reconstruction algorithms, as well as detector designs, can be constrained. The validity of the resultant decision rules is confirmed using both Monte Carlo and Project 8 data.
△ Less
Submitted 31 May, 2022; v1 submitted 7 December, 2021;
originally announced December 2021.
-
Nanophotonic chiral sensing: How does it actually work?
Authors:
Steffen Both,
Martin Schäferling,
Florian Sterl,
Egor Muljarov,
Harald Giessen,
Thomas Weiss
Abstract:
Nanophotonic chiral sensing has recently attracted a lot of attention. The idea is to exploit the strong light-matter interaction in nanophotonic resonators to determine the concentration of chiral molecules at ultra-low thresholds, which is highly attractive for numerous applications in life science and chemistry. However, a thorough understanding of the underlying interactions is still missing.…
▽ More
Nanophotonic chiral sensing has recently attracted a lot of attention. The idea is to exploit the strong light-matter interaction in nanophotonic resonators to determine the concentration of chiral molecules at ultra-low thresholds, which is highly attractive for numerous applications in life science and chemistry. However, a thorough understanding of the underlying interactions is still missing. The theoretical description relies on either simple approximations or on purely numerical approaches. We close this gap and present a general theory of chiral light-matter interactions in arbitrary resonators. Our theory describes the chiral interaction as a perturbation of the resonator modes, also known as resonant states or quasi-normal modes. We observe two dominant contributions: A chirality-induced resonance shift and changes in the modes excitation and emission efficiencies. Our theory brings new and deep insights for tailoring and enhancing chiral light-matter interactions. Furthermore, it allows to predict spectra much more efficiently in comparison to conventional approaches. This is particularly true as chiral interactions are inherently weak and therefore perturbation theory fits extremely well for this problem.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
DNA-assembled nanoarchitectures with multiple components in regulated and coordinated motion
Authors:
Pengfei Zhan,
Maximilian J. Urban,
Steffen Both,
Xiaoyang Duan,
Anton Kuzyk,
Thomas Weiss,
Na Liu
Abstract:
Coordinating functional parts to operate in concert is essential for machinery. In gear trains, meshed gears are compactly interlocked, working together to impose rotation or translation. In photosynthetic systems, a variety of biological entities in the thylakoid membrane interact with each other, converting light energy into chemical energy. However, coordinating individual parts to carry out re…
▽ More
Coordinating functional parts to operate in concert is essential for machinery. In gear trains, meshed gears are compactly interlocked, working together to impose rotation or translation. In photosynthetic systems, a variety of biological entities in the thylakoid membrane interact with each other, converting light energy into chemical energy. However, coordinating individual parts to carry out regulated and coordinated motion within an artificial nanoarchitecture poses challenges, owing to the requisite control on the nanoscale. Here, we demonstrate DNA-directed nanosystems, which comprise hierarchically-assembled DNA origami filaments, fluorophores, and gold nanocrystals. These individual building blocks can execute independent, synchronous, or joint motion upon external inputs. These are optically monitored in situ using fluorescence spectroscopy, taking advantage of the sensitive distance-dependent interactions between the gold nanocrystals and fluorophores positioned on the DNA origami. Our work leverages the complexity of DNA-based artificial nanosystems with tailored dynamic functionality, representing a viable route towards technomimetic nanomachinery.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
DNA-Assembled Multilayer Sliding Nanosystems
Authors:
Pengfei Zhan,
Steffen Both,
Thomas Weiss,
Na Liu
Abstract:
DNA nanotechnology allows for the realization of complex nanoarchitectures in which the spatial arrangements of different constituents and most functions can be enabled by DNA. When optically active components are integrated in such systems, the resulting nanoarchitectures not only provide great insights into the self-assembly of nanoscale elements in a systematic way but also impart tailored opti…
▽ More
DNA nanotechnology allows for the realization of complex nanoarchitectures in which the spatial arrangements of different constituents and most functions can be enabled by DNA. When optically active components are integrated in such systems, the resulting nanoarchitectures not only provide great insights into the self-assembly of nanoscale elements in a systematic way but also impart tailored optical functionality to DNA origami. In this Letter, we demonstrate DNA-assembled multilayer nanosystems, which can carry out coordinated and reversible sliding motion powered by DNA fuels. Gold nanoparticles cross-link DNA origami filaments to define the configurations of the multilayer nanoarchitectures as well as to mediate relative sliding between the neighboring origami filaments. Meanwhile, the gold nanoparticles serve as optical probes to dynamically interact with the fluorophores tethered on the filaments, rendering in situ detection of the stepwise sliding processes possible. This work seeds the basis to implement DNA-assembled complex optical nanoarchitectures with programmability and addressability, advancing the field with new momentum.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Watching a Single Fluorophore Molecule Walk into a Plasmonic Hotspot
Authors:
Ling Xin,
Mo Lu,
Steffen Both,
Markus Pfeiffer,
Maximilian J. Urban,
Chao Zhou,
Hao Yan,
Thomas Weiss,
Na Liu,
Klas Lindfors
Abstract:
Plasmonic nanoantennas allow for enhancing the spontaneous emission, altering the emission polarization, and sha** the radiation pattern of quantum emitters. A critical challenge for the experimental realizations is positioning a single emitter into the hotspot of a plasmonic antenna with nanoscale accuracy. We demonstrate a dynamic light-matter interaction nanosystem enabled by the DNA origami…
▽ More
Plasmonic nanoantennas allow for enhancing the spontaneous emission, altering the emission polarization, and sha** the radiation pattern of quantum emitters. A critical challenge for the experimental realizations is positioning a single emitter into the hotspot of a plasmonic antenna with nanoscale accuracy. We demonstrate a dynamic light-matter interaction nanosystem enabled by the DNA origami technique. A single fluorophore molecule can autonomously and unidirectionally walk into the hotspot of a plasmonic nanoantenna along a designated origami track. Successive fluorescence intensity increase and lifetime reduction are in situ monitored using single-molecule fluorescence spectroscopy, while the fluorophore walker gradually approaches and eventually enters the plasmonic hotspot. Our scheme offers a dynamic platform, which can be used to develop functional materials, investigate intriguing light-matter interaction phenomena, and serve as prototype system for examining theoretical models.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Gold nanocrystal-mediated sliding of doublet DNA origami filaments
Authors:
Maximilian J. Urban,
Steffen Both,
Chao Zhou,
Anton Kuzyk,
Klas Lindfors,
Thomas Weiss,
Na Liu
Abstract:
Sliding is one of the fundamental mechanical movements in machinery. In macroscopic systems, double-rack pinion machines employ gears to slide two linear tracks along opposite directions. In microscopic systems, kinesin-5 proteins crosslink and slide apart antiparallel microtubules, promoting spindle bipolarity and elongation during mitosis. Here we demonstrate an artificial nanoscopic analog, in…
▽ More
Sliding is one of the fundamental mechanical movements in machinery. In macroscopic systems, double-rack pinion machines employ gears to slide two linear tracks along opposite directions. In microscopic systems, kinesin-5 proteins crosslink and slide apart antiparallel microtubules, promoting spindle bipolarity and elongation during mitosis. Here we demonstrate an artificial nanoscopic analog, in which gold nanocrystals can mediate coordinated sliding of two antiparallel DNA origami filaments powered by DNA fuels. Stepwise and reversible sliding along opposite directions is in situ monitored and confirmed using fluorescence spectroscopy. A theoretical model including different energy transfer mechanisms is developed to understand the observed fluorescence dynamics. We further show that such sliding can also take place in the presence of multiple DNA sidelocks that are introduced to inhibit the relative movements. Our work enriches the toolbox of DNA-based nanomachinery, taking one step further toward the vision of molecular nanofactories.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Chiral Plasmonic Hydrogen Sensors
Authors:
Marcus Matuschek,
Dhruv Pratap Singh,
Hyeon-Ho Jeong,
Maxim Nesterov,
Thomas Weiss,
Peer Fischer,
Frank Neubrech,
Na Liu
Abstract:
In this article, a chiral plasmonic hydrogen-sensing platform using palladium-based nanohelices is demonstrated. Such 3D chiral nanostructures fabricated by nanoglancing angle deposition exhibit strong circular dichroism both experimentally and theoretically. The chiroptical properties of the palladium nanohelices are altered upon hydrogen uptake and sensitively depend on the hydrogen concentratio…
▽ More
In this article, a chiral plasmonic hydrogen-sensing platform using palladium-based nanohelices is demonstrated. Such 3D chiral nanostructures fabricated by nanoglancing angle deposition exhibit strong circular dichroism both experimentally and theoretically. The chiroptical properties of the palladium nanohelices are altered upon hydrogen uptake and sensitively depend on the hydrogen concentration. Such properties are well suited for remote and spark-free hydrogen sensing in the flammable range. Hysteresis is reduced, when an increasing amount of gold is utilized in the palladium-gold hybrid helices. As a result, the linearity of the circular dichroism in response to hydrogen is significantly improved. The chiral plasmonic sensor scheme is of potential interest for hydrogen-sensing applications, where good linearity and high sensitivity are required.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Near surface defects: Cause of deficit between internal and external open-circuit voltage in solar cells
Authors:
Mohit Sood,
Aleksander Urbaniak,
Christian Kameni Boumenou,
Thomas Weiss,
Hossam Elanzeery,
Finn Babbe,
Florian Werner,
Michele Melchiorre,
Susanne Siebentritt
Abstract:
The presence of interface recombination in a complex multilayered thin-film solar structure causes a disparity between the internal open-circuit voltage (VOC,in), measured by photoluminescence, and the external open-circuit voltage (VOC,ex) i.e. an additional VOC deficit. Higher VOC,ex value aim require a comprehensive understanding of connection between VOC deficit and interface recombination. He…
▽ More
The presence of interface recombination in a complex multilayered thin-film solar structure causes a disparity between the internal open-circuit voltage (VOC,in), measured by photoluminescence, and the external open-circuit voltage (VOC,ex) i.e. an additional VOC deficit. Higher VOC,ex value aim require a comprehensive understanding of connection between VOC deficit and interface recombination. Here, a deep near-surface defect model at the absorber/buffer interface is developed for copper indium di-selenide solar cells grown under Cu excess conditions to explain the disparity between VOC,in and VOC,ex.. The model is based on experimental analysis of admittance spectroscopy and deep-level transient spectroscopy, which show the signature of deep acceptor defect. Further, temperature-dependent current-voltage measurements confirm the presence of near surface defects as the cause of interface recombination. The numerical simulations show strong decrease in the local VOC,in near the absorber/buffer interface leading to a VOC deficit in the device. This loss mechanism leads to interface recombination without a reduced interface bandgap or Fermi level pinning. Further, these findings demonstrate that the VOC,in measurements alone can be inconclusive and might conceal the information on interface recombination pathways, establishing the need for complementary techniques like temperature dependent current voltage measurements to identify the cause of interface recombination in the devices.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Bayesian Analysis of a Future Beta Decay Experiment's Sensitivity to Neutrino Mass Scale and Ordering
Authors:
A. Ashtari Esfahani,
M. Betancourt,
Z. Bogorad,
S. Böser,
N. Buzinsky,
R. Cervantes,
C. Claessens,
L. de Viveiros,
M. Fertl,
J. A. Formaggio,
L. Gladstone,
M. Grando,
M. Guigue,
J. Hartse,
K. M. Heeger,
X. Huyan,
J. Johnston,
A. M. Jones,
K. Kazkaz,
B. H. LaRoque,
A. Lindman,
R. Mohiuddin,
B. Monreal,
J. A. Nikkel,
E. Novitski
, et al. (21 additional authors not shown)
Abstract:
Bayesian modeling techniques enable sensitivity analyses that incorporate detailed expectations regarding future experiments. A model-based approach also allows one to evaluate inferences and predicted outcomes, by calibrating (or measuring) the consequences incurred when certain results are reported. We present procedures for calibrating predictions of an experiment's sensitivity to both continuo…
▽ More
Bayesian modeling techniques enable sensitivity analyses that incorporate detailed expectations regarding future experiments. A model-based approach also allows one to evaluate inferences and predicted outcomes, by calibrating (or measuring) the consequences incurred when certain results are reported. We present procedures for calibrating predictions of an experiment's sensitivity to both continuous and discrete parameters. Using these procedures and a new Bayesian model of the $β$-decay spectrum, we assess a high-precision $β$-decay experiment's sensitivity to the neutrino mass scale and ordering, for one assumed design scenario. We find that such an experiment could measure the electron-weighted neutrino mass within $\sim40\,$meV after 1 year (90$\%$ credibility). Neutrino masses $>500\,$meV could be measured within $\approx5\,$meV. Using only $β$-decay and external reactor neutrino data, we find that next-generation $β$-decay experiments could potentially constrain the mass ordering using a two-neutrino spectral model analysis. By calibrating mass ordering results, we identify reporting criteria that can be tuned to suppress false ordering claims. In some cases, a two-neutrino analysis can reveal that the mass ordering is inverted, an unobtainable result for the traditional one-neutrino analysis approach.
△ Less
Submitted 1 June, 2021; v1 submitted 24 December, 2020;
originally announced December 2020.
-
All-dielectric silicon metalens for two-dimensional particle manipulation in optical tweezers
Authors:
Teanchai Chantakit,
Christian Schlickriede,
Basudeb Sain,
Fabian Meyer,
Thomas Weiss,
Nattaporn Chattham,
Thomas Zentgraf
Abstract:
Dynamic control of compact chip-scale contactless manipulation of particles for bioscience applications remains a challenging endeavor, which is restrained by the balance between trap** efficiency and scalable apparatus. Metasurfaces offer the implementation of feasible optical tweezers on a planar platform for sha** the exerted optical force by a microscale-integrated device. Here, we design…
▽ More
Dynamic control of compact chip-scale contactless manipulation of particles for bioscience applications remains a challenging endeavor, which is restrained by the balance between trap** efficiency and scalable apparatus. Metasurfaces offer the implementation of feasible optical tweezers on a planar platform for sha** the exerted optical force by a microscale-integrated device. Here, we design and experimentally demonstrate a highly efficient silicon-based metalens for two-dimensional optical trap** in the near-infrared. Our metalens concept is based on the Pancharatnam-Berry phase, which enables the device for polarization-sensitive particle manipulation. Our optical trap** setup is capable of adjusting the position of both the metasurface lens and the particle chamber freely in three directions, which offers great freedom for optical trap adjustment and alignment. Two-dimensional (2D) particle manipulation is done with a relatively low numerical aperture metalens ($NA_{ML}=0.6$). We experimentally demonstrate both 2D polarization sensitive drag and drop manipulation of polystyrene particles suspended in water and transfer of angular orbital momentum to these particles with a single tailored beam. Our work may open new possibilities for lab-on-a-chip optical trap** for bioscience applications and micro to nanoscale optical tweezers.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Influence of disorder on a Bragg microcavity
Authors:
S. G. Tikhodeev,
E. A. Muljarov,
W. Langbein,
N. A. Gippius,
H. Giessen,
T. Weiss
Abstract:
Using the resonant-state expansion for leaky optical modes of a planar Bragg microcavity, we investigate the influence of disorder on its fundamental cavity mode. We model the disorder by randomly varying the thickness of the Bragg-pair slabs (composing the mirrors) and the cavity, and calculate the resonant energy and linewidth of each disordered microcavity exactly, comparing the results with th…
▽ More
Using the resonant-state expansion for leaky optical modes of a planar Bragg microcavity, we investigate the influence of disorder on its fundamental cavity mode. We model the disorder by randomly varying the thickness of the Bragg-pair slabs (composing the mirrors) and the cavity, and calculate the resonant energy and linewidth of each disordered microcavity exactly, comparing the results with the resonant-state expansion for a large basis set and within its first and second orders of perturbation theory. We show that random shifts of interfaces cause a growth of the inhomogeneous broadening of the fundamental mode that is proportional to the magnitude of disorder. Simultaneously, the quality factor of the microcavity decreases inversely proportional to the square of the magnitude of disorder. We also find that first-order perturbation theory works very accurately up to a reasonably large disorder magnitude, especially for calculating the resonance energy, which allows us to derive qualitatively the scaling of the microcavity properties with disorder strength.
△ Less
Submitted 20 January, 2021; v1 submitted 8 September, 2020;
originally announced September 2020.
-
PILOT: Physics-Informed Learned Optimized Trajectories for Accelerated MRI
Authors:
Tomer Weiss,
Ortal Senouf,
Sanketh Vedula,
Oleg Michailovich,
Michael Zibulevsky,
Alex Bronstein
Abstract:
Magnetic Resonance Imaging (MRI) has long been considered to be among "the gold standards" of diagnostic medical imaging. The long acquisition times, however, render MRI prone to motion artifacts, let alone their adverse contribution to the relative high costs of MRI examination. Over the last few decades, multiple studies have focused on the development of both physical and post-processing method…
▽ More
Magnetic Resonance Imaging (MRI) has long been considered to be among "the gold standards" of diagnostic medical imaging. The long acquisition times, however, render MRI prone to motion artifacts, let alone their adverse contribution to the relative high costs of MRI examination. Over the last few decades, multiple studies have focused on the development of both physical and post-processing methods for accelerated acquisition of MRI scans. These two approaches, however, have so far been addressed separately. On the other hand, recent works in optical computational imaging have demonstrated growing success of concurrent learning-based design of data acquisition and image reconstruction schemes. Such schemes have already demonstrated substantial effectiveness, leading to considerably shorter acquisition times and improved quality of image reconstruction. Inspired by this initial success, in this work, we propose a novel approach to the learning of optimal schemes for conjoint acquisition and reconstruction of MRI scans, with the optimization carried out simultaneously with respect to the time-efficiency of data acquisition and the quality of resulting reconstructions. To be of a practical value, the schemes are encoded in the form of general k-space trajectories, whose associated magnetic gradients are constrained to obey a set of predefined hardware requirements (as defined in terms of, e.g., peak currents and maximum slew rates of magnetic gradients). With this proviso in mind, we propose a novel algorithm for the end-to-end training of a combined acquisition-reconstruction pipeline using a deep neural network with differentiable forward- and back-propagation operators. We demonstrate its effectiveness on image reconstruction and image segmentation tasks, reporting substantial improvements in terms of acceleration factors as well as the quality of these tasks.
△ Less
Submitted 13 April, 2021; v1 submitted 12 September, 2019;
originally announced September 2019.
-
Metasurface interferometry towards quantum sensors
Authors:
Philip Georgi,
Marcello Massaro,
Kai-Hong Luo,
Basudeb Sain,
Nicola Montaut,
Harald Herrmann,
Thomas Weiss,
Guixin Li,
Christine Silberhorn,
Thomas Zentgraf
Abstract:
Optical metasurfaces open new avenues for precise wavefront control of light for integrated quantum technology. Here, we demonstrate a hybrid integrated quantum photonic system that is capable to entangle and disentangle two-photon spin states at a dielectric metasurface. By interfering single-photon pairs at a nanostructured dielectric metasurface, a path-entangled two-photon NOON state with circ…
▽ More
Optical metasurfaces open new avenues for precise wavefront control of light for integrated quantum technology. Here, we demonstrate a hybrid integrated quantum photonic system that is capable to entangle and disentangle two-photon spin states at a dielectric metasurface. By interfering single-photon pairs at a nanostructured dielectric metasurface, a path-entangled two-photon NOON state with circular polarization is generated that exhibits a quantum HOM interference visibility of 86 $\pm$ 4%. Furthermore, we demonstrate nonclassicality and phase sensitivity in a metasurface-based interferometer with a fringe visibility of 86.8 $\pm$ 1.1 % in the coincidence counts. This high visibility proves the metasurface-induced path entanglement inside the interferometer. Our findings provide a promising way to hybrid-integrated quantum technology with high-dimensional functionalities in various applications like imaging, sensing, and computing.
△ Less
Submitted 14 August, 2019;
originally announced August 2019.
-
Locust: C++ software for simulation of RF detection
Authors:
Project 8 Collaboration,
A. Ashtari Esfahani,
S. Böser,
N. Buzinsky,
R. Cervantes,
C. Claessens,
L. de Viveiros,
M. Fertl,
J. A. Formaggio,
L. Gladstone,
M. Guigue,
K. M. Heeger,
J. Johnston,
A. M. Jones,
K. Kazkaz,
B. H. LaRoque,
A. Lindman,
E. Machado,
B. Monreal,
E. C. Morrison,
J. A. Nikkel,
E. Novitski,
N. S. Oblath,
W. Pettus,
R. G. H. Robertson
, et al. (14 additional authors not shown)
Abstract:
The Locust simulation package is a new C++ software tool developed to simulate the measurement of time-varying electromagnetic fields using RF detection techniques. Modularity and flexibility allow for arbitrary input signals, while concurrently supporting tight integration with physics-based simulations as input. External signals driven by the Kassiopeia particle tracking package are discussed, d…
▽ More
The Locust simulation package is a new C++ software tool developed to simulate the measurement of time-varying electromagnetic fields using RF detection techniques. Modularity and flexibility allow for arbitrary input signals, while concurrently supporting tight integration with physics-based simulations as input. External signals driven by the Kassiopeia particle tracking package are discussed, demonstrating conditional feedback between Locust and Kassiopeia during software execution. An application of the simulation to the Project 8 experiment is described. Locust is publicly available at https://github.com/project8/locust_mc.
△ Less
Submitted 19 December, 2019; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Joint learning of cartesian undersampling and reconstruction for accelerated MRI
Authors:
Tomer Weiss,
Sanketh Vedula,
Ortal Senouf,
Oleg Michailovich,
Michael Zibulevsky,
Alex Bronstein
Abstract:
Magnetic Resonance Imaging (MRI) is considered today the golden-standard modality for soft tissues. The long acquisition times, however, make it more prone to motion artifacts as well as contribute to the relatively high costs of this examination. Over the years, multiple studies concentrated on designing reduced measurement schemes and image reconstruction schemes for MRI, however, these problems…
▽ More
Magnetic Resonance Imaging (MRI) is considered today the golden-standard modality for soft tissues. The long acquisition times, however, make it more prone to motion artifacts as well as contribute to the relatively high costs of this examination. Over the years, multiple studies concentrated on designing reduced measurement schemes and image reconstruction schemes for MRI, however, these problems have been so far addressed separately. On the other hand, recent works in optical computational imaging have demonstrated growing success of the simultaneous learning-based design of the acquisition and reconstruction schemes manifesting significant improvement in the reconstruction quality with a constrained time budget. Inspired by these successes, in this work, we propose to learn accelerated MR acquisition schemes (in the form of Cartesian trajectories) jointly with the image reconstruction operator. To this end, we propose an algorithm for training the combined acquisition-reconstruction pipeline end-to-end in a differentiable way. We demonstrate the significance of using the learned Cartesian trajectories at different speed up rates.
△ Less
Submitted 5 April, 2020; v1 submitted 22 May, 2019;
originally announced May 2019.
-
Multichannel vectorial holographic display and encryption
Authors:
Ruizhe Zhao,
Basudeb Sain,
Qunshuo Wei,
Chengchun Tang,
Xiaowei Li,
Thomas Weiss,
Lingling Huang,
Yongtian Wang,
Thomas Zentgraf
Abstract:
Since its invention, holography has emerged as a powerful tool to fully reconstruct the wavefronts of light including all the fundamental properties (amplitude, phase, polarization, wave vector, and frequency). For exploring the full capability for information storage/display and enhancing the encryption security of metasurface holograms, smart multiplexing techniques together with suitable metasu…
▽ More
Since its invention, holography has emerged as a powerful tool to fully reconstruct the wavefronts of light including all the fundamental properties (amplitude, phase, polarization, wave vector, and frequency). For exploring the full capability for information storage/display and enhancing the encryption security of metasurface holograms, smart multiplexing techniques together with suitable metasurface designs are highly demanded. Here, we integrate multiple polarization manipulation channels for various spatial phase profiles into a single birefringent vectorial hologram by completely avoiding unwanted cross-talk. Multiple independent target phase profiles with quantified phase relations that can process significantly different information in different polarization states are realized within a single metasurface. For our metasurface holograms, we demonstrate high fidelity, large efficiency, broadband operation, and a total of twelve polarization channels. Such multichannel polarization multiplexing can be used for dynamic vectorial holographic display and can provide triple protection for optical security. The concept is appealing for applications of arbitrary spin to angular momentum conversion and various phase modulation/beam sha** elements.
△ Less
Submitted 24 March, 2019;
originally announced March 2019.
-
First-order perturbation theory for material changes in the surrounding of open optical resonators
Authors:
Steffen Both,
Thomas Weiss
Abstract:
The single-mode approximation of the resonant state expansion has proven to give accurate first-order approximations of resonance shifts and linewidth changes when modifying the material properties inside open optical resonators. Here, we extend this first-order perturbation theory to modifications of the material properties in the surrounding medium. As a side product of our derivations, we retri…
▽ More
The single-mode approximation of the resonant state expansion has proven to give accurate first-order approximations of resonance shifts and linewidth changes when modifying the material properties inside open optical resonators. Here, we extend this first-order perturbation theory to modifications of the material properties in the surrounding medium. As a side product of our derivations, we retrieve the already known analytical normalization condition for resonant states. We apply our theory to two example systems: A metallic nanosphere and a one-dimensional photonic crystal slab.
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Electron Radiated Power in Cyclotron Radiation Emission Spectroscopy Experiments
Authors:
A. Ashtari Esfahani,
V. Bansal,
S. Boser,
N. Buzinsky,
R. Cervantes,
C. Claessens,
L. de Viveiros,
P. J. Doe,
M. Fertl,
J. A. Formaggio,
L. Gladstone,
M. Guigue,
K. M. Heeger,
J. Johnston,
A. M. Jones,
K. Kazkaz,
B. H. LaRoque,
M. Leber,
A. Lindman,
E. Machado,
B. Monreal,
E. C. Morrison,
J. A. Nikkel,
E. Novitski,
N. S. Oblath
, et al. (16 additional authors not shown)
Abstract:
The recently developed technique of Cyclotron Radiation Emission Spectroscopy (CRES) uses frequency information from the cyclotron motion of an electron in a magnetic bottle to infer its kinetic energy. Here we derive the expected radio frequency signal from an electron in a waveguide CRES apparatus from first principles. We demonstrate that the frequency-domain signal is rich in information about…
▽ More
The recently developed technique of Cyclotron Radiation Emission Spectroscopy (CRES) uses frequency information from the cyclotron motion of an electron in a magnetic bottle to infer its kinetic energy. Here we derive the expected radio frequency signal from an electron in a waveguide CRES apparatus from first principles. We demonstrate that the frequency-domain signal is rich in information about the electron's kinematic parameters, and extract a set of measurables that in a suitably designed system are sufficient for disentangling the electron's kinetic energy from the rest of its kinematic features. This lays the groundwork for high-resolution energy measurements in future CRES experiments, such as the Project 8 neutrino mass measurement.
△ Less
Submitted 9 January, 2019;
originally announced January 2019.
-
Quasinormal mode solvers for resonators with dispersive materials
Authors:
P. Lalanne,
W. Yan,
A. Gras,
C. Sauvan,
J. -P. Hugonin,
M. Besbes,
G. Demesy,
M. D. Truong,
B. Gralak,
F. Zolla,
A. Nicolet,
F. Binkowski,
L. Zschiedrich,
S. Burger,
J. Zimmerling,
R. Remis,
P. Urbach,
H. T. Liu,
T. Weiss
Abstract:
Optical resonators are widely used in modern photonics. Their spectral response and temporal dynamics are fundamentally driven by their natural resonances, the so-called quasinormal modes (QNMs), with complex frequencies. For optical resonators made of dispersive materials, the QNM computation requires solving a nonlinear eigenvalue problem. This rises a difficulty that is only scarcely documented…
▽ More
Optical resonators are widely used in modern photonics. Their spectral response and temporal dynamics are fundamentally driven by their natural resonances, the so-called quasinormal modes (QNMs), with complex frequencies. For optical resonators made of dispersive materials, the QNM computation requires solving a nonlinear eigenvalue problem. This rises a difficulty that is only scarcely documented in the literature. We review our recent efforts for implementing efficient and accurate QNM-solvers for computing and normalizing the QNMs of micro- and nano-resonators made of highly-dispersive materials. We benchmark several methods for three geometries, a two-dimensional plasmonic crystal, a two-dimensional metal grating, and a three-dimensional nanopatch antenna on a metal substrate, in the perspective to elaborate standards for the computation of resonance modes.
△ Less
Submitted 28 November, 2018;
originally announced November 2018.
-
Analytical mode normalization and resonant state expansion for optical fibers - an efficient tool to model transverse disorder
Authors:
S. Upendar,
I. Allayarov,
M. A. Schmidt,
T. Weiss
Abstract:
We adapt the resonant state expansion to optical fibers such as capillary and photonic crystal fibers. As a key requirement of the resonant state expansion and any related perturbative approach, we derive the correct analytical normalization for all modes of these fiber structures, including leaky modes that radiate energy perpendicular to the direction of propagation and have fields that grow wit…
▽ More
We adapt the resonant state expansion to optical fibers such as capillary and photonic crystal fibers. As a key requirement of the resonant state expansion and any related perturbative approach, we derive the correct analytical normalization for all modes of these fiber structures, including leaky modes that radiate energy perpendicular to the direction of propagation and have fields that grow with distance from the fiber core. Based on the normalized fiber modes, an eigenvalue equation is derived that allows for calculating the influence of small and large perturbations such as structural disorder on the guiding properties. This is demonstrated for two test systems: a capillary fiber and an endlessly single mode fiber.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
How to calculate the pole expansion of the optical scattering matrix from the resonant states
Authors:
T. Weiss,
E. A. Muljarov
Abstract:
We present a formulation for the pole expansion of the scattering matrix of open optical resonators, in which the pole contributions are expressed solely in terms of the resonant states, their wavenumbers, and their electromagnetic fields. Particularly, our approach provides an accurate description of the optical scattering matrix without the requirement of a fit for the pole contributions or the…
▽ More
We present a formulation for the pole expansion of the scattering matrix of open optical resonators, in which the pole contributions are expressed solely in terms of the resonant states, their wavenumbers, and their electromagnetic fields. Particularly, our approach provides an accurate description of the optical scattering matrix without the requirement of a fit for the pole contributions or the restriction to geometries or systems with low Ohmic losses. Hence, it is possible to derive the analytic dependence of the scattering matrix on the wavenumber with low computational effort, which allows for avoiding the artificial frequency discretization of conventional frequency-domain solvers of Maxwell's equations and for finding the optical far- and near-field response based on the physically meaningfull resonant states. This is demonstrated for three test systems, including a chiral arrangement of nanoantennas, for which we calculate the absorption and the circular dichroism.
△ Less
Submitted 25 July, 2018; v1 submitted 5 April, 2018;
originally announced April 2018.
-
Resonant-state expansion for open optical systems: Generalization to magnetic, chiral, and bi-anisotropic materials
Authors:
E. A. Muljarov,
T. Weiss
Abstract:
The resonant-state expansion, a recently developed powerful method in electrodynamics, is generalized here for open optical systems containing magnetic, chiral, or bi-anisotropic materials. It is shown that the key matrix eigenvalue equation of the method remains the same, but the matrix elements of the perturbation now contain variations of the permittivity, permeability, and bi-anisotropy tensor…
▽ More
The resonant-state expansion, a recently developed powerful method in electrodynamics, is generalized here for open optical systems containing magnetic, chiral, or bi-anisotropic materials. It is shown that the key matrix eigenvalue equation of the method remains the same, but the matrix elements of the perturbation now contain variations of the permittivity, permeability, and bi-anisotropy tensors. A general normalization of resonant states in terms of the electric and magnetic fields is presented.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Characterization of Chromium Compensated GaAs as an x-ray Sensor Material for Charge-Integrating Pixel Array Detectors
Authors:
Julian Becker,
Mark W. Tate,
Katherine S. Shanks,
Hugh T. Philipp,
Joel T. Weiss,
Prafull Purohit,
Darol Chamberlain,
Sol M. Gruner
Abstract:
We studied the properties of chromium compensated GaAs when coupled to charge integrating ASICs as a function of detector temperature, applied bias and x-ray tube energy. The material is a photoresistor and can be biased to collect either electrons or holes by the pixel circuitry. Both are studied here. Previous studies have shown substantial hole trap**. This trap** and other sensor propertie…
▽ More
We studied the properties of chromium compensated GaAs when coupled to charge integrating ASICs as a function of detector temperature, applied bias and x-ray tube energy. The material is a photoresistor and can be biased to collect either electrons or holes by the pixel circuitry. Both are studied here. Previous studies have shown substantial hole trap**. This trap** and other sensor properties give rise to several non-ideal effects which include an extended point spread function, variations in the effective pixel size, and rate dependent offset shifts. The magnitude of these effects varies with temperature and bias, mandating good temperature uniformity in the sensor and very good temperature stabilization, as well as a carefully selected bias voltage.
△ Less
Submitted 21 November, 2017; v1 submitted 7 July, 2017;
originally announced July 2017.
-
Sub-Microsecond X-Ray Imaging Using Hole-Collecting Schottky type CdTe with Charge-Integrating Pixel Array Detectors
Authors:
Julian Becker,
Mark W. Tate,
Katherine S. Shanks,
Hugh T. Philipp,
Joel T. Weiss,
Prafull Purohit,
Darol Chamberlain,
Sol M. Gruner
Abstract:
CdTe is increasingly being used as the x-ray sensing material in imaging pixel array detectors for x-rays, generally above 20 keV, where silicon sensors become unacceptably transparent. Unfortunately CdTe suffers from polarization, which can alter the response of the material over time and with accumulated dose. Most prior studies used long integration times or CdTe that was not of the hole-collec…
▽ More
CdTe is increasingly being used as the x-ray sensing material in imaging pixel array detectors for x-rays, generally above 20 keV, where silicon sensors become unacceptably transparent. Unfortunately CdTe suffers from polarization, which can alter the response of the material over time and with accumulated dose. Most prior studies used long integration times or CdTe that was not of the hole-collecting Schottky type. We investigated the temporal response of hole-collecting Schottky type CdTe sensors on timescales ranging from tens of nanoseconds to several seconds. We found that the material shows signal persistence on the timescale of hundreds of milliseconds attributed to the detrap** of a shallow trap, and additional persistence on sub-microsecond timescales after polarization. The results show that this type of CdTe can be used for time resolved studies down to approximately 100 ns. However quantitative interpretation of the signal requires careful attention to bias voltages, polarization and exposure history.
△ Less
Submitted 15 May, 2017; v1 submitted 6 March, 2017;
originally announced March 2017.
-
High Dynamic Range X-ray Detector Pixel Architectures Utilizing Charge Removal
Authors:
Joel T. Weiss,
Katherine S. Shanks,
Hugh T. Philipp,
Julian Becker,
Darol Chamberlain,
Prafull Purohit,
Mark W. Tate,
Sol M. Gruner
Abstract:
Several charge integrating CMOS pixel front-ends utilizing charge removal techniques have been fabricated to extend dynamic range for x-ray diffraction applications at synchrotron sources and x-ray free electron lasers (XFELs). The pixels described herein build on the Mixed Mode Pixel Array Detector (MM-PAD) framework, developed previously by our group to perform high dynamic range imaging. These…
▽ More
Several charge integrating CMOS pixel front-ends utilizing charge removal techniques have been fabricated to extend dynamic range for x-ray diffraction applications at synchrotron sources and x-ray free electron lasers (XFELs). The pixels described herein build on the Mixed Mode Pixel Array Detector (MM-PAD) framework, developed previously by our group to perform high dynamic range imaging. These new pixels boast several orders of magnitude improvement in maximum flux over the MM-PAD, which is capable of measuring a sustained flux in excess of 10$^{8}$ x-rays/pixel/second while maintaining sensitivity to smaller signals, down to single x-rays. To extend dynamic range, charge is removed from the integration node of the front-end amplifier without interrupting integration. The number of times this process occurs is recorded by a digital counter in the pixel. The parameter limiting full well is thereby shifted from the size of an integration capacitor to the depth of a digital counter. The result is similar to that achieved by counting pixel array detectors, but the integrators presented here are designed to tolerate a sustained flux >10$^{11}$ x-rays/pixel/second. Pixel front-end linearity was evaluated by direct current injection and results are presented. A small-scale readout ASIC utilizing these pixel architectures has been fabricated and the use of these architectures to increase single x-ray pulse dynamic range at XFELs is discussed briefly.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
Characterization of CdTe Sensors with Schottky Contacts Coupled to Charge-Integrating Pixel Array Detectors for X-Ray Science
Authors:
Julian Becker,
Mark W. Tate,
Katherine S. Shanks,
Hugh T. Philipp,
Joel T. Weiss,
Prafull Purohit,
Darol Chamberlain,
Jacob P. C. Ruff,
Sol M. Gruner
Abstract:
Pixel Array Detectors (PADs) consist of an x-ray sensor layer bonded pixel-by-pixel to an underlying readout chip. This approach allows both the sensor and the custom pixel electronics to be tailored independently to best match the x-ray imaging requirements. Here we present characterizations of CdTe sensors hybridized with two different charge-integrating readout chips, the Keck PAD and the Mixed…
▽ More
Pixel Array Detectors (PADs) consist of an x-ray sensor layer bonded pixel-by-pixel to an underlying readout chip. This approach allows both the sensor and the custom pixel electronics to be tailored independently to best match the x-ray imaging requirements. Here we present characterizations of CdTe sensors hybridized with two different charge-integrating readout chips, the Keck PAD and the Mixed-Mode PAD (MM-PAD), both developed previously in our laboratory. The charge-integrating architecture of each of these PADs extends the instantaneous counting rate by many orders of magnitude beyond that obtainable with photon counting architectures. The Keck PAD chip consists of rapid, 8-frame, in-pixel storage elements with framing periods $<$150 ns. The second detector, the MM-PAD, has an extended dynamic range by utilizing an in-pixel overflow counter coupled with charge removal circuitry activated at each overflow. This allows the recording of signals from the single-photon level to tens of millions of x-rays/pixel/frame while framing at 1 kHz. Both detector chips consist of a 128$\times$128 pixel array with (150 $μ$m)$^2$ pixels.
△ Less
Submitted 28 November, 2016; v1 submitted 12 September, 2016;
originally announced September 2016.
-
Circularly polarized lasing in chiral modulated semiconductor microcavity with GaAs quantum wells
Authors:
A. A. Demenev,
V. D. Kulakovskii,
C. Schneider,
S. Brodbeck,
M. Kamp,
S. Höfling,
S. V. Lobanov,
T. Weiss,
N. A. Gippius,
S. G. Tikhodeev
Abstract:
We report the elliptically, close to circularly polarized lasing at $\hbarω= 1.473$ and 1.522 eV from an AlAs/AlGaAs Bragg microcavity with 12 GaAs quantum wells in the active region and chiral-etched upper distributed Bragg refractor under optical pump at room temperature. The advantage of using the chiral photonic crystal with a large contrast of dielectric permittivities is its giant optical ac…
▽ More
We report the elliptically, close to circularly polarized lasing at $\hbarω= 1.473$ and 1.522 eV from an AlAs/AlGaAs Bragg microcavity with 12 GaAs quantum wells in the active region and chiral-etched upper distributed Bragg refractor under optical pump at room temperature. The advantage of using the chiral photonic crystal with a large contrast of dielectric permittivities is its giant optical activity, allowing to fabricate a very thin half-wave plate, with a thickness of the order of the emitted light wavelength, and to realize the monolithic control of circular polarization.
△ Less
Submitted 27 July, 2016;
originally announced July 2016.
-
Controlling circular polarization of light emitted by quantum dots using chiral photonic crystal slab
Authors:
S. V. Lobanov,
S. G. Tikhodeev,
N. A. Gippius,
A. A. Maksimov,
E. V. Filatov,
I. I. Tartakovskii,
V. D. Kulakovskii,
T. Weiss,
C. Schneider,
J. Geßler,
M. Kamp,
S. Höfling
Abstract:
We study the polarization properties of light emitted by quantum dots that are embedded in chiral photonic crystal structures made of achiral planar GaAs waveguides. A modification of the electromagnetic mode structure due to the chiral grating fabricated by partial etching of the wave\-guide layer has been shown to result in a high circular polarization degree $ρ_c$ of the quantum dot emission in…
▽ More
We study the polarization properties of light emitted by quantum dots that are embedded in chiral photonic crystal structures made of achiral planar GaAs waveguides. A modification of the electromagnetic mode structure due to the chiral grating fabricated by partial etching of the wave\-guide layer has been shown to result in a high circular polarization degree $ρ_c$ of the quantum dot emission in the absence of external magnetic field. The physical nature of the phenomenon can be understood in terms of the reciprocity principle taking into account the structural symmetry. At the resonance wavelength, the magnitude of $|ρ_c|$ is predicted to exceed 98%. The experimentally achieved value of $|ρ_c|=81$% is smaller, which is due to the contribution of unpolarized light scattered by grating defects, thus breaking its periodicity. The achieved polarization degree estimated removing the unpolarized nonresonant background from the emission spectra can be estimated to be as high as 96%, close to the theoretical prediction.
△ Less
Submitted 25 September, 2015; v1 submitted 4 September, 2015;
originally announced September 2015.
-
Polarization control of quantum dot emission by chiral photonic crystal slabs
Authors:
Sergey V. Lobanov,
Thomas Weiss,
Nikolay A. Gippius,
Sergei G. Tikhodeev,
Vladimir D. Kulakovskii,
Kuniaki Konishi,
Makoto Kuwata-Gonokami
Abstract:
We investigate theoretically the polarization properties of the quantum dot's optical emission from chiral photonic crystal structures made of achiral materials in the absence of external magnetic field at room temperature. The mirror symmetry of the local electromagnetic field is broken in this system due to the decreased symmetry of the chiral modulated layer. As a result, the radiation of rando…
▽ More
We investigate theoretically the polarization properties of the quantum dot's optical emission from chiral photonic crystal structures made of achiral materials in the absence of external magnetic field at room temperature. The mirror symmetry of the local electromagnetic field is broken in this system due to the decreased symmetry of the chiral modulated layer. As a result, the radiation of randomly polarized quantum dots normal to the structure becomes partially circularly polarized. The sign and degree of circular polarization are determined by the geometry of the chiral modulated structure and depend on the radiation frequency. A degree of circular polarization up to 99% can be achieved for randomly distributed quantum dots, and can be close to 100% for some single quantum dots.
△ Less
Submitted 3 March, 2015; v1 submitted 23 December, 2014;
originally announced December 2014.
-
Damage-free single-mode transmission of deep-UV light in hollow-core PCF
Authors:
F. Gebert,
M. H. Frosz,
T. Weiss,
Y. Wan,
A. Ermolov,
N. Y. Joly,
P. O. Schmidt,
P. St. J. Russell
Abstract:
Transmission of UV light with high beam quality and pointing stability is desirable for many experiments in atomic, molecular and optical physics. In particular, laser cooling and coherent manipulation of trapped ions with transitions in the UV require stable, single-mode light delivery. Transmitting even ~2 mW CW light at 280 nm through silica solid-core fibers has previously been found to cause…
▽ More
Transmission of UV light with high beam quality and pointing stability is desirable for many experiments in atomic, molecular and optical physics. In particular, laser cooling and coherent manipulation of trapped ions with transitions in the UV require stable, single-mode light delivery. Transmitting even ~2 mW CW light at 280 nm through silica solid-core fibers has previously been found to cause transmission degradation after just a few hours due to optical damage. We show that photonic crystal fiber of the kagomé type can be used for effectively single-mode transmission with acceptable loss and bending sensitivity. No transmission degradation was observed even after >100 hours of operation with 15 mW CW input power. In addition it is shown that implementation of the fiber in a trapped ion experiment significantly increases the coherence times of the internal state transfer due to an increase in beam pointing stability.
△ Less
Submitted 24 April, 2014;
originally announced April 2014.
-
Strong-coupling effects in dissipatively coupled optomechanical systems
Authors:
Talitha Weiss,
Christoph Bruder,
Andreas Nunnenkamp
Abstract:
In this paper we study cavity optomechanical systems in which the position of a mechanical oscillator modulates both the resonance frequency (dispersive coupling) and the linewidth (dissipative coupling) of a cavity mode. Using a quantum noise approach we calculate the optical dam** and the optically-induced frequency shift. We find that dissipatively coupled systems feature two parameter region…
▽ More
In this paper we study cavity optomechanical systems in which the position of a mechanical oscillator modulates both the resonance frequency (dispersive coupling) and the linewidth (dissipative coupling) of a cavity mode. Using a quantum noise approach we calculate the optical dam** and the optically-induced frequency shift. We find that dissipatively coupled systems feature two parameter regions providing amplification and two parameter regions providing cooling. To investigate the strong-coupling regime, we solve the linearized equations of motion exactly and calculate the mechanical and optical spectra. In addition to signatures of normal-mode splitting that are similar to the case of purely dispersive coupling, the spectra contain a striking feature that we trace back to the Fano line shape of the force spectrum. Finally, we show that purely dissipative coupling can lead to optomechanically-induced transparency which will provide an experimentally convenient way to observe normal-mode splitting.
△ Less
Submitted 18 May, 2013; v1 submitted 29 November, 2012;
originally announced November 2012.
-
Emission properties of an oscillating point dipole from a gold Yagi-Uda nanoantenna array
Authors:
S. V. Lobanov,
T. Weiss,
D. Dregely,
H. Giessen,
N. A. Gippius,
S. G. Tikhodeev
Abstract:
We investigate numerically the interaction of an oscillating point dipole with a periodic array of optical Yagi-Uda nanoantennas in the weak coupling limit. A very strong near-field enhancement of the dipole emission by the resonant plasmon mode in the feed element is predicted in this structure. It is shown that the enhancement strength depends strongly on the dipole position, the direction of th…
▽ More
We investigate numerically the interaction of an oscillating point dipole with a periodic array of optical Yagi-Uda nanoantennas in the weak coupling limit. A very strong near-field enhancement of the dipole emission by the resonant plasmon mode in the feed element is predicted in this structure. It is shown that the enhancement strength depends strongly on the dipole position, the direction of the dipole moment, and the oscillation frequency. The radiative intensity of the point dipole from appropriate places next to one feed element may exceed the radiative intensity of an equivalent dipole in free-space by a factor of hundred. In spite of only one director used in each nanoantenna of the array, the far-field emission pattern is highly directed. The radiative efficiency (the ratio of the radiative to the full emission) appears to be around 20%.
△ Less
Submitted 4 October, 2011; v1 submitted 3 October, 2011;
originally announced October 2011.