-
Steerable current-driven emission of spin waves in magnetic vortex pairs
Authors:
Sabri Koraltan,
Katrin Schultheiss,
Florian Bruckner,
Markus Weigand,
Claas Abert,
Dieter Suess,
Sebastian Wintz
Abstract:
The efficient excitation of spin waves is a key challenge in the realization of magnonic devices. We demonstrate the current-driven generation of spin waves in antiferromagnetically coupled magnetic vortices. We employ time-resolved scanning transmission X-ray microscopy (TR-STXM) to directly image the emission of spin waves upon the application of an alternating current flowing directly through t…
▽ More
The efficient excitation of spin waves is a key challenge in the realization of magnonic devices. We demonstrate the current-driven generation of spin waves in antiferromagnetically coupled magnetic vortices. We employ time-resolved scanning transmission X-ray microscopy (TR-STXM) to directly image the emission of spin waves upon the application of an alternating current flowing directly through the magnetic stack. Micromagnetic simulations allow us to identify the origin of the excitation to be the current-driven Oersted field, which in the present system proves to be orders of magnitude more efficient than the commonly used excitation via stripline antennas. Our numerical studies also reveal that the spin-transfer torque can lead to the emission of spin waves as well, yet only at much higher current amplitudes. By using magnetostrictive materials, we futhermore demonstrate that the direction of the magnon propagation can be steered by increasing the excitation amplitude, which modifies the underlying magnetization profile through an additional anisotropy in the magnetic layers. The demonstrated methods allow for the efficient and tunable excitation of spin waves, marking a significant advance in the generation and control of spin waves in magnonic devices.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
Storage, Accumulation and Deceleration of Secondary Beams for Nuclear Astrophysics
Authors:
J. Glorius,
Yu. A. Litvinov,
M. Aliotta,
F. Amjad,
B. Brückner,
C. G. Bruno,
R. Chen,
T. Davinson,
S. F. Dellmann,
T. Dickel,
I. Dillmann,
P. Erbacher,
O. Forstner,
H. Geissel,
C. J. Griffin,
R. Grisenti,
A. Gumberidze,
E. Haettner,
R. Hess,
P. -M. Hillenbrand,
C. Hornung,
R. Joseph,
B. Jurado,
E. Kazanseva,
R. Knöbel
, et al. (39 additional authors not shown)
Abstract:
Low-energy investigations on rare ion beams are often limited by the available intensity and purity of the ion species in focus. Here, we present the first application of a technique that combines in-flight production at relativistic energies with subsequent secondary beam storage, accumulation and finally deceleration to the energy of interest. Using the FRS and ESR facilities at GSI, this scheme…
▽ More
Low-energy investigations on rare ion beams are often limited by the available intensity and purity of the ion species in focus. Here, we present the first application of a technique that combines in-flight production at relativistic energies with subsequent secondary beam storage, accumulation and finally deceleration to the energy of interest. Using the FRS and ESR facilities at GSI, this scheme was pioneered to provide a secondary beam of $^{118}$Te$^{52+}$ for the measurement of nuclear proton-capture at energies of 6 and 7 MeV/u. The technique provided stored beam intensities of about $10^6$ ions at high purity and brilliance, representing a major step towards low-energy nuclear physics studies using rare ion beams.
△ Less
Submitted 30 May, 2023; v1 submitted 25 May, 2023;
originally announced May 2023.
-
Mode purity and structural analysis of x-ray vortices generated by spiral zone plates
Authors:
M. Baluktsian,
L. Loetgering,
G. Dogan,
U. Sanli,
M. Weigand,
M. Rose,
I. Bykova,
G. Schuetz,
K. Keskinbora
Abstract:
In the visible spectrum vortex beams have found various applications, ranging from optical tweezers to super-resolution imaging. Recently, these beams have been demonstrated using X-rays and electron beams. However, so far, no in-depth discussion has been carried out on the vortex quality, which could become essential for a variety of vortex applications. Here, we investigate the mode conversion e…
▽ More
In the visible spectrum vortex beams have found various applications, ranging from optical tweezers to super-resolution imaging. Recently, these beams have been demonstrated using X-rays and electron beams. However, so far, no in-depth discussion has been carried out on the vortex quality, which could become essential for a variety of vortex applications. Here, we investigate the mode conversion efficiency (MCE), vortex structure and stability (in terms of vortex splitting) of the vortex fields generated by spiral zone plates (SZP). We have designed and fabricated SZPs with varying topological charge of both binary and kinoform profile. Kinoforms are known for their 100 % diffraction efficiency in the ideal case. In this work, both types are contrasted with regard to the vortex quality. Utilizing ptychographic coherent diffraction imaging and by comparing to simulations the wavefront of the generated fields is characterized. It was found, that the MCE and vortex structure exhibit the same dependencies on material and ZP properties as the diffraction efficiency (DE) and that the kinoform profile in this sense also improves the vortex quality. With growing SZP charge the MCE decreases. The results link the parameters of optics to the properties of the vortices and help to maximize the performance of ZP based vortex generators for future applications.
△ Less
Submitted 9 September, 2022; v1 submitted 5 August, 2022;
originally announced August 2022.
-
Single-frame far-field diffractive imaging with randomized illumination
Authors:
Abraham L. Levitan,
Kahraman Keskinbora,
Umut T. Sanli,
Markus Weigand,
Riccardo Comin
Abstract:
We introduce a single-frame diffractive imaging method called randomized probe imaging (RPI). In RPI, a sample is illuminated by a structured probe field containing speckles smaller than the sample's typical feature size. Quantitative amplitude and phase images are then reconstructed from the resulting far-field diffraction pattern. The experimental geometry of RPI is straightforward to implement,…
▽ More
We introduce a single-frame diffractive imaging method called randomized probe imaging (RPI). In RPI, a sample is illuminated by a structured probe field containing speckles smaller than the sample's typical feature size. Quantitative amplitude and phase images are then reconstructed from the resulting far-field diffraction pattern. The experimental geometry of RPI is straightforward to implement, requires no near-field optics, and is applicable to extended samples. When the resulting data are analyzed with a complimentary algorithm, reliable reconstructions which are robust to missing data are achieved. To realize these benefits, a resolution limit associated with the numerical aperture of the probe-forming optics is imposed. RPI therefore offers an attractive modality for quantitative X-ray phase imaging when temporal resolution and reliability are critical but spatial resolution in the tens of nanometers is sufficient. We discuss the method, introduce a reconstruction algorithm, and present two proof-of-concept experiments: one using visible light, and one using soft X-rays.
△ Less
Submitted 24 November, 2020; v1 submitted 6 October, 2020;
originally announced October 2020.
-
Electron capture of Xe$^{54+}$ in collisions with H${_2}$ molecules in the energy range between 5.5 MeV/u and 30.9 MeV/u
Authors:
F. M. Kröger,
G. Weber,
M. O. Herdrich,
J. Glorius,
C. Langer,
Z. Slavkovská,
L. Bott,
C. Brandau,
B. Brückner,
K. Blaum,
X. Chen,
S. Dababneh,
T. Davinson,
P. Erbacher,
S. Fiebiger,
T. Gaßner,
K. Göbel,
M. Groothuis,
A. Gumberidze,
Gy. Gyürky,
S. Hagmann,
C. Hahn,
M. Heil,
R. Hess,
R. Hensch
, et al. (41 additional authors not shown)
Abstract:
The electron capture process was studied for Xe$^{54+}$ colliding with H$_2$ molecules at the internal gas target of the ESR storage ring at GSI, Darmstadt. Cross section values for electron capture into excited projectile states were deduced from the observed emission cross section of Lyman radiation, being emitted by the hydrogen-like ions subsequent to the capture of a target electron. The ion…
▽ More
The electron capture process was studied for Xe$^{54+}$ colliding with H$_2$ molecules at the internal gas target of the ESR storage ring at GSI, Darmstadt. Cross section values for electron capture into excited projectile states were deduced from the observed emission cross section of Lyman radiation, being emitted by the hydrogen-like ions subsequent to the capture of a target electron. The ion beam energy range was varied between 5.5 MeV/u and 30.9 MeV/u by applying the deceleration mode of the ESR. Thus, electron capture data was recorded at the intermediate and in particular the low collision energy regime, well below the beam energy necessary to produce bare xenon ions. The obtained data is found to be in reasonable qualitative agreement with theoretical approaches, while a commonly applied empirical formula significantly overestimates the experimental findings.
△ Less
Submitted 10 May, 2020; v1 submitted 5 May, 2020;
originally announced May 2020.
-
Reconfigurable sub-micron spin-wave majority gate with electrical transducers
Authors:
Giacomo Talmelli,
Thibaut Devolder,
Nick Träger,
Johannes Förster,
Sebastian Wintz,
Markus Weigand,
Hermann Stoll,
Marc Heyns,
Gisela Schütz,
Iuliana Radu,
Joachim Gräfe,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics…
▽ More
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics is still lacking. Here, we demonstrate a sub-micron inline spin-wave majority gate with fan-out. Time-resolved imaging of the magnetization dynamics by scanning transmission x-ray microscopy illustrates the device operation. All-electrical spin-wave spectroscopy further demonstrates majority gates with sub-micron dimensions, reconfigurable input and output ports, and frequency-division multiplexing. Challenges for hybrid spintronic computing systems based on spin-wave majority gates are discussed.
△ Less
Submitted 3 September, 2021; v1 submitted 7 August, 2019;
originally announced August 2019.
-
A spallation-based neutron target for direct studies of neutron-induced reactions in inverse kinematics
Authors:
René Reifarth,
Kathrin Göbel,
Tanja Heftrich,
Mario Weigand,
Beatriz Jurado,
Franz Käppeler,
Yuri A. Litvinov
Abstract:
We discuss the possibility to build a neutron target for nuclear reaction studies in inverse kinematics utilizing a storage ring and radioactive ion beams. The proposed neutron target is a specially designed spallation target surrounded by a large moderator of heavy water (D$_2$O). We present the resulting neutron spectra and their properties as a target. We discuss possible realizations at differ…
▽ More
We discuss the possibility to build a neutron target for nuclear reaction studies in inverse kinematics utilizing a storage ring and radioactive ion beams. The proposed neutron target is a specially designed spallation target surrounded by a large moderator of heavy water (D$_2$O). We present the resulting neutron spectra and their properties as a target. We discuss possible realizations at different experimental facilities.
△ Less
Submitted 27 April, 2017;
originally announced April 2017.
-
Experimental setup and procedure for the measurement of the 7Be(n,α)α reaction at n_TOF
Authors:
L. Cosentino,
A. Musumarra,
M. Barbagallo,
A. Pappalardo,
N. Colonna,
L. Damone,
M. Piscopo,
P. Finocchiaro,
E. Maugeri,
S. Heinitz,
D. Schumann,
R. Dressler,
N. Kivel,
O. Aberle,
J. Andrzejewski,
L. Audouin,
M. Ayranov,
M. Bacak,
S. Barros,
J. Balibrea-Correa,
V. Beecares,
F. Becvar,
C. Beinrucker,
E. Berthoumieux,
J. Billowes
, et al. (107 additional authors not shown)
Abstract:
The newly built second experimental area EAR2 of the n_TOF spallation neutron source at CERN allows to perform (n, charged particles) experiments on short-lived highly radioactive targets. This paper describes a detection apparatus and the experimental procedure for the determination of the cross-section of the 7Be(n,α) reaction, which represents one of the focal points toward the solution of the…
▽ More
The newly built second experimental area EAR2 of the n_TOF spallation neutron source at CERN allows to perform (n, charged particles) experiments on short-lived highly radioactive targets. This paper describes a detection apparatus and the experimental procedure for the determination of the cross-section of the 7Be(n,α) reaction, which represents one of the focal points toward the solution of the cosmological Lithium abundance problem, and whose only measurement, at thermal energy, dates back to 1963. The apparently unsurmountable experimental difficulties stemming from the huge 7Be γ-activity, along with the lack of a suitable neutron beam facility, had so far prevented further measurements. The detection system is subject to considerable radiation damage, but is capable of disentangling the rare reaction signals from the very high background. This newly developed setup could likely be useful also to study other challenging reactions requiring the detectors to be installed directly in the neutron beam.
△ Less
Submitted 1 April, 2016;
originally announced April 2016.
-
GEANT4 simulation of the neutron background of the C$_6$D$_6$ set-up for capture studies at n_TOF
Authors:
n_TOF collaboration,
:,
P. Žugec,
N. Colonna,
D. Bosnar,
S. Altstadt,
J. Andrzejewski,
L. Audouin,
M. Barbagallo,
V. Bécares,
F. Bečvář,
F. Belloni,
E. Berthoumieux,
J. Billowes,
V. Boccone,
M. Brugger,
M. Calviani,
F. Calviño,
D. Cano-Ott,
C. Carrapiço,
F. Cerutti,
E. Chiaveri,
M. Chin,
G. Cortés,
M. A. Cortés-Giraldo
, et al. (83 additional authors not shown)
Abstract:
The neutron sensitivity of the C$_6$D$_6$ detector setup used at n_TOF for capture measurements has been studied by means of detailed GEANT4 simulations. A realistic software replica of the entire n_TOF experimental hall, including the neutron beam line, sample, detector supports and the walls of the experimental area has been implemented in the simulations. The simulations have been analyzed in t…
▽ More
The neutron sensitivity of the C$_6$D$_6$ detector setup used at n_TOF for capture measurements has been studied by means of detailed GEANT4 simulations. A realistic software replica of the entire n_TOF experimental hall, including the neutron beam line, sample, detector supports and the walls of the experimental area has been implemented in the simulations. The simulations have been analyzed in the same manner as experimental data, in particular by applying the Pulse Height Weighting Technique. The simulations have been validated against a measurement of the neutron background performed with a $^\mathrm{nat}$C sample, showing an excellent agreement above 1 keV. At lower energies, an additional component in the measured $^\mathrm{nat}$C yield has been discovered, which prevents the use of $^\mathrm{nat}$C data for neutron background estimates at neutron energies below a few hundred eV. The origin and time structure of the neutron background have been derived from the simulations. Examples of the neutron background for two different samples are demonstrating the important role of accurate simulations of the neutron background in capture cross section measurements.
△ Less
Submitted 26 June, 2014;
originally announced June 2014.
-
Ion beam lithography for Fresnel zone plates in X-ray microscopy
Authors:
Kahraman Keskinbora,
Corinne Grévent,
Michael Bechtel,
Markus Weigand,
Eberhard Goering,
Achim Nadzeyka,
Lloyd Peto,
Stefan Rehbein,
Gerd Schneider,
Rolf Follath,
Joan Vila-Comamala,
Hanfei Yan,
Gisela Schütz
Abstract:
Fresnel Zone Plates (FZP) are to date very successful focusing optics for X-rays. Established methods of fabrication are rather complex and based on electron beam lithography (EBL). Here, we show that ion beam lithography (IBL) may advantageously simplify their preparation. A FZP operable from the extreme UV to the limit of the hard X-ray was prepared and tested from 450 eV to 1500 eV. The trapezo…
▽ More
Fresnel Zone Plates (FZP) are to date very successful focusing optics for X-rays. Established methods of fabrication are rather complex and based on electron beam lithography (EBL). Here, we show that ion beam lithography (IBL) may advantageously simplify their preparation. A FZP operable from the extreme UV to the limit of the hard X-ray was prepared and tested from 450 eV to 1500 eV. The trapezoidal profile of the FZP favorably activates its 2nd order focus. The FZP with an outermost zone width of 100 nm allows the visualization of features down to 61, 31 and 21 nm in the 1st, 2nd and 3rd order focus respectively. Measured efficiencies in the 1st and 2nd order of diffraction reach the theoretical predictions.
△ Less
Submitted 3 April, 2014; v1 submitted 21 May, 2012;
originally announced May 2012.