-
Spring-block friction model for landslides: Application to Vaiont and Maoxian landslides
Authors:
Rong Qiang Wei,
Qing Li Zeng
Abstract:
It is necessary to study the kinematics of landslide prior to its failure for accurately estimating the time of landslide instability. Based on a spring block model, considering the Dieterich Ruina's friction, the kinematic displacement and velocity of landslide along the slip surface are analyzed under quasistatic approximation. A algebraic relationship including three parameters between the disp…
▽ More
It is necessary to study the kinematics of landslide prior to its failure for accurately estimating the time of landslide instability. Based on a spring block model, considering the Dieterich Ruina's friction, the kinematic displacement and velocity of landslide along the slip surface are analyzed under quasistatic approximation. A algebraic relationship including three parameters between the displacement (or velocity) and time is obtained, and then applied to two typical landslides: Vaiont in Italy, and Maoxian in China. The results show that the proposed spring block friction model can well describe the kinematic data of landslides before their failure. If the effective data of displacement can be obtained to determine the three parameters above, this simple physical model could be used to estimate the time of landslide instability. This spring block friction model also provides clear physical basis for the usual inverse velocity method of the landslide warning, the stick slip of some landslides, and the scaling relationship between the numbers of the landslides and their volume.
△ Less
Submitted 29 January, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Counting and metrology of distributed atomic clocks using metropolitan fiber
Authors:
Jialiang Wang,
Deling Zeng,
Youzhen Gui,
Lian Dong,
Rong Wei
Abstract:
We demonstrate a distributed atomic clocks network between Shanghai Institute of Optics and fine Mechanics (SIOM) and Shanghai Institute of Measurement and Test (SIMT). The frequency signals from three different clocks transfer in one fiber link and four clocks can have comparison in two different labs.By comparing the results of the comparison between the two labs, it was found that the consisten…
▽ More
We demonstrate a distributed atomic clocks network between Shanghai Institute of Optics and fine Mechanics (SIOM) and Shanghai Institute of Measurement and Test (SIMT). The frequency signals from three different clocks transfer in one fiber link and four clocks can have comparison in two different labs.By comparing the results of the comparison between the two labs, it was found that the consistency of the frequency signal is on the order of lower than 1E-15. And we also achieve consistency between two locations at the E-15 level of frequency reporting. This scheme can achieve distributed time counting and frequency dissemination of remote atomic clocks, which is a new exploration of the future time kee** laboratory mode.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
A robust single-pixel particle image velocimetry based on fully convolutional networks with cross-correlation embedded
Authors:
Qi Gao,
Hongtao Lin,
Han Tu,
Haoran Zhu,
Runjie Wei,
Guo** Zhang,
Xueming Shao
Abstract:
Particle image velocimetry (PIV) is essential in experimental fluid dynamics. In the current work, we propose a new velocity field estimation paradigm, which achieves a synergetic combination of the deep learning method and the traditional cross-correlation method. Specifically, the deep learning method is used to optimize and correct a coarse velocity guess to achieve a super-resolution calculati…
▽ More
Particle image velocimetry (PIV) is essential in experimental fluid dynamics. In the current work, we propose a new velocity field estimation paradigm, which achieves a synergetic combination of the deep learning method and the traditional cross-correlation method. Specifically, the deep learning method is used to optimize and correct a coarse velocity guess to achieve a super-resolution calculation. And the cross-correlation method provides the initial velocity field based on a coarse correlation with a large interrogation window. As a reference, the coarse velocity guess helps with improving the robustness of the proposed algorithm. This fully convolutional network with embedded cross-correlation is named as CC-FCN. CC-FCN has two types of input layers, one is for the particle images, and the other is for the initial velocity field calculated using cross-correlation with a coarse resolution. Firstly, two pyramidal modules extract features of particle images and initial velocity field respectively. Then the fusion module appropriately fuses these features. Finally, CC-FCN achieves the super-resolution calculation through a series of deconvolution layers to obtain the single-pixel velocity field. As the supervised learning strategy is considered, synthetic data sets including ground-truth fluid motions are generated to train the network parameters. Synthetic and real experimental PIV data sets are used to test the trained neural network in terms of accuracy, precision, spatial resolution and robustness. The test results show that these attributes of CC-FCN are further improved compared with those of other tested PIV algorithms. The proposed model could therefore provide competitive and robust estimations for PIV experiments.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Observation of Square-Root Higher-Order Topological States in Photonic Waveguide Arrays
Authors:
Juan Kang,
Tao Liu,
Mou Yan,
Dandan Yang,
Xiongjian Huang,
Ruishan Wei,
Jianrong Qiu,
Guo** Dong,
Zhongmin Yang,
Franco Nori
Abstract:
Recently, high-order topological insulators (HOTIs), accompanied by topologically nontrivial boundary states with codimension larger than one, have been extensively explored because of unconventional bulk-boundary correspondences. As a novel type of HOTIs, very recent works have explored the square-root HOTIs, where the topological nontrivial nature of bulk bands stems from the square of the Hamil…
▽ More
Recently, high-order topological insulators (HOTIs), accompanied by topologically nontrivial boundary states with codimension larger than one, have been extensively explored because of unconventional bulk-boundary correspondences. As a novel type of HOTIs, very recent works have explored the square-root HOTIs, where the topological nontrivial nature of bulk bands stems from the square of the Hamiltonian. In this paper, we experimentally demonstrate 2D square-root HOTIs in photonic waveguide arrays written in glass using femtosecond laser direct-write techniques. Edge and corner states are clearly observed through visible light spectra. The dynamical evolutions of topological boundary states are experimentally demonstrated, which further verify the existence of in-gap edge and corner states. The robustness of these edge and corner states is revealed by introducing defects and disorders into the bulk structures. Our studies provide an extended platform for realizing light manipulation and stable photonic devices.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Locating earthquake epicenter without a seismic velocity model
Authors:
Rong Qiang Wei
Abstract:
We present a method for locating the seismic event epicenters without assuming an Earth model of the seismic velocity structure, based on the linear relationship between $\log R$ and $\log t$ (where $R$ is the radius of spherical P wave propagated outwards from the hypocenter, $t$ is the travle-time of the P wave). This relationship is derived from the dimensional analysis and a lot of theoretical…
▽ More
We present a method for locating the seismic event epicenters without assuming an Earth model of the seismic velocity structure, based on the linear relationship between $\log R$ and $\log t$ (where $R$ is the radius of spherical P wave propagated outwards from the hypocenter, $t$ is the travle-time of the P wave). This relationship is derived from the dimensional analysis and a lot of theoretical or real seismic data, in which the earthquake can be considered to be a point source. Application to 1209 events occurred from 2014 to 2017 in the IASPEI Ground Truth (GT) reference events list shows that our method can locate the correct seismic event epicenters in a simple way. $\sim 97.2$ % of seismic epicenters are located with both longitude and latitude errors $\in[-0.1^\circ, +0.1^\circ]$. This ratio can increase if with a finer search grid. As a direct and global-search location, this method may be useful in obtaining the earthquake epicenters occurred in the areas where the seismic velocity structure is poorly known, the starting points or the constraints for other location methods.
△ Less
Submitted 11 August, 2021;
originally announced August 2021.
-
Application of minimum entropy deconvolution to detect $pP$ phase in a seismogram
Authors:
Rong Qiang Wei
Abstract:
The hypocentral depth is a key requirement in seismology and earthquake engineering, but it is very difficult to be determined. The current accepted improvement is taking advantage of the depth phases, such as the pP, to constrain this parameter. However, it is not easy to pick such a phase in a seismogram from the other phases and the backgound noises. Here we propose the use of the minimum entro…
▽ More
The hypocentral depth is a key requirement in seismology and earthquake engineering, but it is very difficult to be determined. The current accepted improvement is taking advantage of the depth phases, such as the pP, to constrain this parameter. However, it is not easy to pick such a phase in a seismogram from the other phases and the backgound noises. Here we propose the use of the minimum entropy deconvolution (MED) to detect it. Synthetic tests show that impulse(s) hidden in the seimic noises, eg. discrete unit impulses or the Gaussian mono impulses, can be detected completely. Further, we assume that the pP phase is an impulse-like signal buried in the Z component of the seismogram and applied this technique to 12 earthquakes in the International Association of Seismology and Physics (IASPEI) Ground Truth (GT) reference events list. Results show that 9 out of 12 earthquakes have absolute errors of less than 2.00 s for the travel-time differences of pP-P, and the maximum absolute error is 3.06 s . This demonstrate that the assumption above is reasonable, and this technique works well and effectively even for a single seismogram. Due to its little cost and effectiveness, this technique may be also useful in the starting points for other methods to detect pP phase.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
The First Round Result from the TianQin-1 Satellite
Authors:
Jun Luo,
Yan-Zheng Bai,
Lin Cai,
Bin Cao,
Wei-Ming Chen,
Yu Chen,
De-Cong Cheng,
Yan-Wei Ding,
Hui-Zong Duan,
Xingyu Gou,
Chao-Zheng Gu,
De-Feng Gu,
Zi-Qi He,
Shuang Hu,
Yuexin Hu,
Xiang-Qing Huang,
Qinghua Jiang,
Yuan-Ze Jiang,
Hong-Gang Li,
Hong-Yin Li,
Jia Li,
Ming Li,
Zhu Li,
Zhu-Xi Li,
Yu-Rong Liang
, et al. (33 additional authors not shown)
Abstract:
The TianQin-1 satellite (TQ-1), which is the first technology demonstration satellite for the TianQin project, was launched on 20 December 2019. The first round of experiment had been carried out from 21 December 2019 until 1 April 2020. The residual acceleration of the satellite is found to be about $1\times10^{-10}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$ and about…
▽ More
The TianQin-1 satellite (TQ-1), which is the first technology demonstration satellite for the TianQin project, was launched on 20 December 2019. The first round of experiment had been carried out from 21 December 2019 until 1 April 2020. The residual acceleration of the satellite is found to be about $1\times10^{-10}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$ and about $5\times10^{-11}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.05~{\rm Hz}\,$, measured by an inertial sensor with a sensitivity of $5\times10^{-12}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$. The micro-Newton thrusters has demonstrated a thrust resolution of $0.1~μ{\rm N}$ and a thrust noise of $0.3~μ{\rm N}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}$. The residual noise of the satellite with drag-free control is $3\times10^{-9}~{\rm m}/{\rm s}^{2}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$. The noise level of the optical readout system is about $30~{\rm pm}/{\rm Hz}^{1/2}$ at $0.1~{\rm Hz}\,$. The temperature stability at temperature monitoring position is controlled to be about $\pm3~{\rm mK}$ per orbit, and the mismatch between the center-of-mass of the satellite and that of the test mass is measured with a precision of better than $0.1~{\rm mm}$.
△ Less
Submitted 21 August, 2020;
originally announced August 2020.
-
Post-processing techniques of 4D flow MRI: velocity and wall shear stress
Authors:
Qi Gao,
Xingli Liu,
Hong** Wang,
Fei Li,
Peng Wu,
Zhaozhuo Niu,
Mansu **,
RunJie Wei
Abstract:
As the original velocity field obtained from four-dimensional (4D) flow magnetic resonance imaging (MRI) contains considerable amount of noises and errors, the available Divergence-free smoothing (DFS) method can be used to process the 4D flow MRI data for reducing noises, eliminating errors, fixing missing data and eventually providing the smoothed flow field. However, the traditional DFS does no…
▽ More
As the original velocity field obtained from four-dimensional (4D) flow magnetic resonance imaging (MRI) contains considerable amount of noises and errors, the available Divergence-free smoothing (DFS) method can be used to process the 4D flow MRI data for reducing noises, eliminating errors, fixing missing data and eventually providing the smoothed flow field. However, the traditional DFS does not have the ability to deal with the flow in the near wall region of vessel, especially for satisfying the no-slip boundary condition. In this study, therefore, an improved DFS method with specific near wall treatment is introduced for processing with 4D flow MRI inner flow with curved wall boundary as the blood flows. On the other hand, due to the coarse resolution of 4D flow MRI, velocity gradients in the near wall region are normally underestimated. As a result, a special wall function is required for accurately computing wall shear stress (WSS).
△ Less
Submitted 8 December, 2019;
originally announced December 2019.
-
Particle reconstruction of volumetric particle image velocimetry with strategy of machine learning
Authors:
Qi Gao,
Shaowu Pan,
Hong** Wang,
Runjie Wei,
**jun Wang
Abstract:
Three-dimensional particle reconstruction with limited two-dimensional projections is an under-determined inverse problem that the exact solution is often difficult to be obtained. In general, approximate solutions can be obtained by iterative optimization methods. In the current work, a practical particle reconstruction method based on a convolutional neural network (CNN) with geometry-informed f…
▽ More
Three-dimensional particle reconstruction with limited two-dimensional projections is an under-determined inverse problem that the exact solution is often difficult to be obtained. In general, approximate solutions can be obtained by iterative optimization methods. In the current work, a practical particle reconstruction method based on a convolutional neural network (CNN) with geometry-informed features is proposed. The proposed technique can refine the particle reconstruction from a very coarse initial guess of particle distribution generated by any traditional algebraic reconstruction technique (ART) based methods. Compared with available ART-based algorithms, the novel technique makes significant improvements in terms of reconstruction quality, {robustness to noises}, and at least an order of magnitude faster in the offline stage.
△ Less
Submitted 13 September, 2021; v1 submitted 15 September, 2019;
originally announced September 2019.
-
An HAM-Based Analytic Modeling Methodology for Memristor Enabling Fast Convergence
Authors:
Wei Hu,
Du Yongqian,
Haibo Luo,
Chuandong Chen,
Rongshan Wei
Abstract:
Memristor has great application prospects in various high-performance electronic systems, such as memory, artificial intelligence, and neural networks, due to its fast speed, nano-scale dimensions, and low-power consumption. However, traditional nonanalytic models and lately reported analytic models for memristor have the problems of nonconvergence and slow convergence, respectively. These problem…
▽ More
Memristor has great application prospects in various high-performance electronic systems, such as memory, artificial intelligence, and neural networks, due to its fast speed, nano-scale dimensions, and low-power consumption. However, traditional nonanalytic models and lately reported analytic models for memristor have the problems of nonconvergence and slow convergence, respectively. These problems lay great obstacles in the analysis, simulation and design of memristor. To address these problems, a modeling methodology for analytic approximate solution of the state variable in memristor is proposed in this work. This methodology solves the governing equation of memristor by adopting the Homotopy Analysis Method (HAM) for the first time, and the convergence performance of the methodology is enhanced by an optimized convergence-control parameter in the HAM. The simulation results, compared with the reported analytic models, demonstrate that the HAM-based modeling methodology achieves faster convergence while guaranteeing sufficient accuracy. Based on the methodology, it can be simultaneously revealed that highly nonlinearity is the potential sources of slow convergence in analytic models, which is beneficial for the analysis and design guidance. In addition, a Spice subcircuit is constructed based on the obtained HAM model, and then it is integrated into an oscillator to verify its applicability. Due to the generality of HAM, this methodology may be easily extended to other memory devices.
△ Less
Submitted 1 December, 2018;
originally announced December 2018.
-
An exact solution to the partition function of the finite-size Ising Model
Authors:
Rong Qiang Wei
Abstract:
There is no an exact solution to three-dimensional (3D) finite-size Ising model (referred to as the Ising model hereafter for simplicity) and even two-dimensional (2D) Ising model with non-zero external field to our knowledge. Here by using an elementary but rigorous method, we obtain an exact solution to the partition function of the Ising model with $N$ lattice sites. It is a sum of $2^N$ expone…
▽ More
There is no an exact solution to three-dimensional (3D) finite-size Ising model (referred to as the Ising model hereafter for simplicity) and even two-dimensional (2D) Ising model with non-zero external field to our knowledge. Here by using an elementary but rigorous method, we obtain an exact solution to the partition function of the Ising model with $N$ lattice sites. It is a sum of $2^N$ exponential functions and holds for $D$-dimensional ($D=1,2,3,...$) Ising model with or without the external field. This solution provides a new insight into the problem of the Ising model and the related difficulties, and new understanding of the classic exact solutions for one-dimensional (1D) (Kramers and Wannier, 1941) or 2D Ising model (Onsager, 1944). With this solution, the specific heat and magnetisation of a simple 3D Ising model are calculated, which are consistent with the results from experiments and/or numerical simulations. Furthermore, the solution here and the related approaches, can also be available to other models like the percolation and/or the Potts model.
△ Less
Submitted 11 October, 2018; v1 submitted 2 May, 2018;
originally announced May 2018.
-
Heat flows inferred from a Parker's-like formula for stable or quasi-stable continents
Authors:
Rong Qiang Wei
Abstract:
Surface heat flow is a key parameter for the geothermal structure, rheology, and hence the dynamics of continents. However, the coverage of heat flow measurements is still poor in many continental areas. By transforming the stable nonlinear heat conduction equation into a Poisson's one, we develop a method to infer surface heat flow for a stable or quasi-stable continent from a Parker's-like formu…
▽ More
Surface heat flow is a key parameter for the geothermal structure, rheology, and hence the dynamics of continents. However, the coverage of heat flow measurements is still poor in many continental areas. By transforming the stable nonlinear heat conduction equation into a Poisson's one, we develop a method to infer surface heat flow for a stable or quasi-stable continent from a Parker's-like formula. This formula provides the relationship between the Fourier transform of surface heat flow and the sum of the Fourier transform of the powers of geometry for the heat production (HP) interface in the continental lithosphere. Once the interface geometry is known, one to three dimensional distribution of the surface heat flow can be calculated accurately by this formula. As a case study, we estimate the three-dimensional surface heat flows for the Ordos geological block and its adjacent areas in China on a $1^\circ \times 1^\circ$ grid based on a simple layered constant HP model. Comparing to the measurements, most relative errors of the heat flows inferred are less than 20\%, showing this method is a favorable way to estimate surface heat flow for stable or quasi-stable continental regions where measurements are rare or absent.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
A heat production model for stable continental lithosphere by the inversion of the surface heat flows
Authors:
Rong Qiang Wei
Abstract:
Obtaining the heat production (HP) in the lithosphere has always been a challenge for the geotherms and evolution of continents. By transforming the nonlinear stable heat conduction equation into a linear Poisson's potential one, we propose a method to infer the HP in the stable continental lithosphere. This method estimates the HP through the inversion of the corresponding heat flow (HF) observat…
▽ More
Obtaining the heat production (HP) in the lithosphere has always been a challenge for the geotherms and evolution of continents. By transforming the nonlinear stable heat conduction equation into a linear Poisson's potential one, we propose a method to infer the HP in the stable continental lithosphere. This method estimates the HP through the inversion of the corresponding heat flow (HF) observations. Either the distribution of HP within the lithosphere or geometry of HP interfaces (even the both) can be inverted. Herein we focus on the inversion of the geometry of the HP interface. An analogical Parker-Oldenburg formula, which is often used in the inversion of potential field, is deduced for this purpose. This analogical formula is based on a relationship between the Fourier transform of the corresponding HF observations and the sum of the Fourier transform for the powers of the interface geometry. When the mean depth of the HP interface and the HP contrast between the two media are given, one to three-dimensional geometry of the HP interface can be iteratively calculated. As a case study, we construct a HP model for the lithosphere of the Ordos geological block and its adjacent area in China, in which three-dimensional geometry of the upper crustal HP interface is estimated. It is found that the geometry of this HP interface distribute uneven in a magnitude of dozens of km. With this HP model, the geotherms for the Ordos geological block and its adjacent area is calculated further, which fit the constraints from the studies on the xenolith and tectonics well.
△ Less
Submitted 13 August, 2017;
originally announced August 2017.
-
Inferring the paleo-longitude directly from the paleo-geomagnetic data
Authors:
Rong Qiang Wei
Abstract:
It is thought that paleo-magnetism has the incapability in providing paleo-longitude. To obtain this important location parameter many other indirect methods have been developed based on different assumptions. Here we present a scanning method to derive the paleo-longitude from the usual paleo-magnetic measurements. This method takes into account the contributions to the Earth's magnetic potential…
▽ More
It is thought that paleo-magnetism has the incapability in providing paleo-longitude. To obtain this important location parameter many other indirect methods have been developed based on different assumptions. Here we present a scanning method to derive the paleo-longitude from the usual paleo-magnetic measurements. This method takes into account the contributions to the Earth's magnetic potential from additional dipoles with their axes in the equatorial plane, which were omitted by the traditional paleo-magnetism. In this method, firstly we assume that $θ_p$ and $λ_p$ are accurate (or determined well enough), and define a cost function; And secondly we minimize this function by systematically searching through all longitudes and latitudes in their domain; Finally when a local minima of this cost function reaches, the corresponding longitude is the paleo-longitude that we look for. Simultaneously the paleo-latitude is obtained. Synthetic experiments show that this method works very well when there are no errors in the geomagntic measurements (Components of magnetic field: $B_x, B_y, B_z$, or declination $D$ and inclination $I$). If there exist errors in geomagntic measurements, we recommend adding a Tikhonov regularization factor to the cost function for deriving reasonable paleo-longitude, and provide two examples. Error analysis shows that the main error sources for paleo-longitude are $B_y$ and/or $I$ in our method. In addition, such a cost function and its like could be used as a theoretical framework that can directly invert the paleo-longitude, paleo-latitude, and even the location of the paleo-geomagnetic poles simultaneously from the paleo-geomagnetic measurements through any appropriate inversion method.
△ Less
Submitted 30 November, 2020; v1 submitted 3 August, 2017;
originally announced August 2017.
-
Measurement of mass by optical forced oscillation of absorbing particles trapped in air
Authors:
**da Lin,
Jianliao Deng,
Rong Wei,
Yong-qing Li,
Yuzhu Wang
Abstract:
We demonstrate the measurement of mass of the absorbing micro-particle trapped in air by optical forced oscillation. When the trap** light intensity is modulated sinusoidally, the particle in the trap undergoes forced oscillation and the amplitude of the oscillation depends directly on the modulated frequency. Based on a simple spring model, we fit the amplitudes versus the modulated frequencies…
▽ More
We demonstrate the measurement of mass of the absorbing micro-particle trapped in air by optical forced oscillation. When the trap** light intensity is modulated sinusoidally, the particle in the trap undergoes forced oscillation and the amplitude of the oscillation depends directly on the modulated frequency. Based on a simple spring model, we fit the amplitudes versus the modulated frequencies and obtain the stiffness of the optical trap and the mass of the trapped particle. The fitting results show that, for a certain particle, the stiffness varies linearly with the trap** light intensity while the mass is consistent. The density of the micro-particle is then estimated and could be used to classify different kinds of absorbing particles, like C and CuO.
△ Less
Submitted 16 January, 2017;
originally announced January 2017.
-
C-field smoothing by trajectory dynamically tracing compensation in rubidium fountain clock
Authors:
Wenli Wang,
Richang Dong,
Rong Wei,
Tingting Chen,
Qian Wang,
Yuzhu Wang
Abstract:
We present a trajectory dynamically tracing compensation method to smooth the spatial fluctuation of the static magnetic field (C-field) that provides a quantization axis in the fountain clock. The C-field coil current is point-to-point adjusted in accordance to the atoms experienced magnetic field along the flight trajectory. A homogeneous field with a 0.2 nT uncertainty is realized compared to 5…
▽ More
We present a trajectory dynamically tracing compensation method to smooth the spatial fluctuation of the static magnetic field (C-field) that provides a quantization axis in the fountain clock. The C-field coil current is point-to-point adjusted in accordance to the atoms experienced magnetic field along the flight trajectory. A homogeneous field with a 0.2 nT uncertainty is realized compared to 5 nT under the static magnetic field with constant current during the Ramsey interrogation. The corresponding uncertainty associated with the second-order Zeeman shift that we calculate is improved by one order of magnitude. The technique provides an alternative method to improve the magnetic field uniformity particularly for large-scale equipment that is difficult to machine with magnetic shielding. Our method is simple, robust, and essentially important in frequency evaluations concerning the dominant uncertainty contribution due to the quadratic Zeeman shift.
△ Less
Submitted 28 September, 2017; v1 submitted 22 December, 2016;
originally announced December 2016.
-
Magnetic fields induced by a mechanical singularity in a magnetoelastic half plane and their applications to the seismicities in the crust of the Chinese continent
Authors:
Rong Qiang Wei
Abstract:
The interaction between the magnetic field and the elastic deformation field in the crust is studied in a simplified way. The magnetic fields generated by the line singularities in a magnetized elastic half-plane are investigated. Using the general solution and Fourier transform technique, the exact solutions for the generated magnetic inductions due to various cases are obtained in a closed form.…
▽ More
The interaction between the magnetic field and the elastic deformation field in the crust is studied in a simplified way. The magnetic fields generated by the line singularities in a magnetized elastic half-plane are investigated. Using the general solution and Fourier transform technique, the exact solutions for the generated magnetic inductions due to various cases are obtained in a closed form. The results show that the line concentrated force will induced a perturbed magnetic field; The induced magnetic field will indicate the line concentrated force in reverse. The distribution of the vertical component of the magnetic induction caused by the line mechanical singularities is simpler than that of the horizontal component, and it is zero at the origin when the applied magnetic field and the line concentrated force satisfies some conditions. This result is applied to locate the epicenters of the earthquakes and historical earthquakes occurred in the Chinese continental crust. Results show that more than 80\% epicenters are at or near the zero-contours of the vertical component of the magnetic induction observed from satellite. These regions of zero-contours, especially those in active tectonic zones, could be the possible seismogenic zones in the future. The zero-contours of the vertical component of the magnetic induction from satellite could be as geophysical constraints to the risk information on the shallow seismicities, or they can be used as an early monitor for the shallow seismicities in the continental crust, or an auxiliary sign in the determination of the great historical earthquake.
△ Less
Submitted 15 August, 2016;
originally announced September 2016.
-
Decreasing the uncertainty of atomic clocks via real-time noise distinguish
Authors:
Richang Dong,
**da Lin,
Rong Wei,
Wenli Wang,
Fan Zou,
Yuanbo Du,
Tingting Chen,
Yuzhu Wang
Abstract:
The environmental perturbation on atoms is the key factor restricting the performance of atomic frequency standards, especially in long term scale. In this letter, we demonstrate a real-time noise distinguish operation of atomic clocks. The operation improves the statistical uncertainty by about an order of magnitude of our fountain clock which is deteriorated previously by extra noises. The frequ…
▽ More
The environmental perturbation on atoms is the key factor restricting the performance of atomic frequency standards, especially in long term scale. In this letter, we demonstrate a real-time noise distinguish operation of atomic clocks. The operation improves the statistical uncertainty by about an order of magnitude of our fountain clock which is deteriorated previously by extra noises. The frequency offset bring by the extra noise is also corrected. The experiment proves the real-time noise distinguish operation can reduce the contribution of ambient noises and improve the uncertainty limit of atomic clocks.
△ Less
Submitted 17 April, 2016;
originally announced April 2016.
-
Magnetic field dependence of Raman coupling in Alkali atoms
Authors:
Ran Wei,
Erich J. Mueller
Abstract:
We calculate the magnetic field dependence of Rabi rates for two-photon optical Raman processes in alkali atoms. Due to a decoupling of the nuclear and electronic spins, these rates fall with increasing field. At the typical magnetic fields of alkali atom Feshbach resonances (B\sim 200G-1200G), the Raman rates have the same order of magnitude as their zero field values, suggesting one can combine…
▽ More
We calculate the magnetic field dependence of Rabi rates for two-photon optical Raman processes in alkali atoms. Due to a decoupling of the nuclear and electronic spins, these rates fall with increasing field. At the typical magnetic fields of alkali atom Feshbach resonances (B\sim 200G-1200G), the Raman rates have the same order of magnitude as their zero field values, suggesting one can combine Raman-induced gauge fields/spin-orbital coupling with strong Feshbach-induced interactions. The exception is $^6$Li, where there is a factor of 7 suppression in the Raman coupling, compared to its already small zero-field value.
△ Less
Submitted 22 April, 2013; v1 submitted 28 February, 2013;
originally announced March 2013.
-
Deterministic spin-wave interferometer based on Rydberg blockade
Authors:
Ran Wei,
Bo Zhao,
You** Deng,
Yu-Ao Chen,
Jian-Wei Pan
Abstract:
The spin-wave (SW) NOON state is an $N$-particle Fock state with two atomic spin-wave modes maximally entangled. Attributed to the property that the phase is sensitive to collective atomic motion, the SW NOON state can be utilized as a novel atomic interferometer and has promising application in quantum enhanced measurement. In this paper we propose an efficient protocol to deterministically produ…
▽ More
The spin-wave (SW) NOON state is an $N$-particle Fock state with two atomic spin-wave modes maximally entangled. Attributed to the property that the phase is sensitive to collective atomic motion, the SW NOON state can be utilized as a novel atomic interferometer and has promising application in quantum enhanced measurement. In this paper we propose an efficient protocol to deterministically produce the atomic SW NOON state by employing Rydberg blockade. Possible errors in practical manipulations are analyzed. A feasible experimental scheme is suggested. Our scheme is far more efficient than the recent experimentally demonstrated one, which only creates a heralded second-order SW NOON state.
△ Less
Submitted 18 May, 2011; v1 submitted 6 March, 2011;
originally announced March 2011.
-
Light pulse in $Λ$-type cold atomic gases
Authors:
Ran Wei,
Bo Zhao,
You** Deng,
Shuai Chen,
Zeng-Bing Chen,
Jian-Wei Pan
Abstract:
We investigate the behavior of the light pulse in $Lambda$-type cold atomic gases with two counterpropagating control lights with equal strength by directly simulating the dynamic equations and exploring the dispersion relation. Our analysis shows that, depending on the length $L_0$ of the stored wave packet and the decay rate $γ$ of ground-spin coherence, the recreated light can behave differen…
▽ More
We investigate the behavior of the light pulse in $Lambda$-type cold atomic gases with two counterpropagating control lights with equal strength by directly simulating the dynamic equations and exploring the dispersion relation. Our analysis shows that, depending on the length $L_0$ of the stored wave packet and the decay rate $γ$ of ground-spin coherence, the recreated light can behave differently. For long $L_0$ and/or large $γ$, a stationary light pulse is produced, while two propagating light pulses appear for short $L_0$ and/or small $γ$. In the $γ\to 0$ limit, the light always splits into two propagating pulses for sufficiently long time. This scenario agrees with a recent experiment [Y.-W.Lin, et al., Phys. Rev. Lett. 102, 213601(2009)] where two propagating light pulses are generated in laser-cooled cold atomic ensembles.
△ Less
Submitted 28 February, 2010; v1 submitted 14 January, 2010;
originally announced January 2010.
-
Goos-Hänchen shifts in frustrated total internal reflection studied with wave packet propagation
Authors:
Xi Chen,
Chun-Fang Li,
Rong-Rong Wei,
Yan Zhang
Abstract:
We have investigated that the Goos-Hänchen (GH) shifts in frustrated total internal reflection (FTIR) studied with wave packet propagation. In the first-order approximation of the transmission coefficient, the GH shift is exactly the expression given by stationary phase method, thus saturates an asymptotic constant in two different ways depending on the angle of incidence. Taking account into th…
▽ More
We have investigated that the Goos-Hänchen (GH) shifts in frustrated total internal reflection (FTIR) studied with wave packet propagation. In the first-order approximation of the transmission coefficient, the GH shift is exactly the expression given by stationary phase method, thus saturates an asymptotic constant in two different ways depending on the angle of incidence. Taking account into the second-order approximation, the GH shift always depends on the width of the air gap due to the modification of the beam width. It is further shown that the GH shift with second-order correction increases with decreasing the beam width at the small incidence angles, while for the large incidence angles it reveals a strong decrease with decreasing the beam width. These phenomena offers the better understanding of the tunneling delay time in FTIR.
△ Less
Submitted 16 April, 2009;
originally announced April 2009.