Showing 1–27 of 27 results for author: Wei, B

Statistic Vectorial Complex Ray Model and its Application to Three-Dimension Scattering of a Non-spherical Particle

Authors: Rui** Yang, Bing Wei, Claude Rozé, Saïd Idlahcen, Kuan Ffang Ren

Abstract: A Statistic Vectorial Complex Ray Model (SVCRM) is proposed for the scattering of a plane wave by a non-spherical dielectric particle in three dimensions. This method counts the complex amplitudes of all rays arriving in a tiny box in the observation direction. It avoids the two-dimensional interpolation necessary in the Vectorial Complex Ray Model (VCRM) for the calculation of the total field. So… ▽ More A Statistic Vectorial Complex Ray Model (SVCRM) is proposed for the scattering of a plane wave by a non-spherical dielectric particle in three dimensions. This method counts the complex amplitudes of all rays arriving in a tiny box in the observation direction. It avoids the two-dimensional interpolation necessary in the Vectorial Complex Ray Model (VCRM) for the calculation of the total field. So, it is more flexible and suitable to deal with the particle of complex shape. The algorithm has been carefully designed for the calculation of the phases due to the optical path, the reflection and the focal lines/points as well as the amplitude variation caused by the reflection, the refraction and the divergence of the wave on the particle surface. This model is then applied, as an example, to simulate the three-dimensional scattering patterns of a pendent drop. The scattering mechanism is analyzed in details and the special attention has been paid to the scattering patterns around the rainbow angles where the caustics occur. The simulated results have been compared to the experimental results for a pendent drop of two typical sizes and shapes. It is shown that the simulated and the experimental results are in good agreement. This method opens a promising potential in the development of optical measurement techniques in fluid mechanics. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Comments: 12 pages 9 figures

Experimental Access to Observing Decay from Extremely Long-Lived Metastable Electronic States via Penning Trap Spectrometry

Authors: Bingsheng Tu, Ran Si, Yang Shen, Jiarong Wang, Baoren Wei, Chongyang Chen, Ke Yao, Yaming Zou

Abstract: Long-lived ionic quantum states known as metastable electronic states in highly-charged ions (HCIs) are of great interest in fundamental physics. Especially, it generates transitions with very narrow natural linewidth which is a promising candidate for use in the next generation HCI atomic clocks to reach an accuracy below $10^{-19}$. A recent experiment reported in [Nature,581(7806) 2020], used P… ▽ More Long-lived ionic quantum states known as metastable electronic states in highly-charged ions (HCIs) are of great interest in fundamental physics. Especially, it generates transitions with very narrow natural linewidth which is a promising candidate for use in the next generation HCI atomic clocks to reach an accuracy below $10^{-19}$. A recent experiment reported in [Nature,581(7806) 2020], used Penning trap mass spectrometry to measure the energy of an extremely long-lived metastable electronic state, thus opening doors to search for HCI clock transitions. Building upon prior research, this study introduces an experimental proposal with the goal of measuring lifetimes of the metastable states beyond seconds. Our approach employs a sequential pulse-and-phase measurement scheme, allowing for direct observations of the decay processes from metastable electronic states through single-ion mass spectrometry in a Penning trap. This measurement poses a significant challenge to conventional techniques like fluorescence detection. To demonstrate the effectiveness of this method, we conducted a comprehensive simulation under real experimental conditions, yielding promising results in a specific scenario. Two suitable candidates are proposed for testing this method, and the state-of-the-art MCDHF theory are employed for accurate energy levels and transition rate calculations. Some future prospects in the experimental determinations of a wide range of energy and lifetimes of long-lived metastable electronic states, probing hyperfine and magnetic quenching effects on high-order forbidden transitions and search for highly quality HCI clock transitions are discussed. △ Less

Submitted 20 October, 2023; v1 submitted 4 July, 2023; originally announced July 2023.

Minimizing the fluctuation of resonance driving terms in dynamic aperture optimization

Authors: Bingfeng Wei, Zhenghe Bai, Jiajie Tan, Lin Wang, Guangyao Feng

Abstract: Dynamic aperture (DA) is an important nonlinear property of a storage ring lattice, which has a dominant effect on beam injection efficiency and beam lifetime. Generally, minimizing both resonance driving terms (RDTs) and amplitude dependent tune shifts is an essential condition for enlarging the DA. In this paper, we study the correlation between the fluctuation of RDTs along the ring and the DA… ▽ More Dynamic aperture (DA) is an important nonlinear property of a storage ring lattice, which has a dominant effect on beam injection efficiency and beam lifetime. Generally, minimizing both resonance driving terms (RDTs) and amplitude dependent tune shifts is an essential condition for enlarging the DA. In this paper, we study the correlation between the fluctuation of RDTs along the ring and the DA area with double- and multi-bend achromat lattices. It is found that minimizing the RDT fluctuations is more effective than minimizing RDTs themselves in enlarging the DA, and thus can serve as a very powerful indicator in the DA optimization. Besides, it is found that minimizing lower-order RDT fluctuations can also reduce higher-order RDTs, which are not only more computationally complicated but also more numerous. The effectiveness of controlling the RDT fluctuations in enlarging the DA confirms that the local cancellation of nonlinear effects used in some diffraction-limited storage ring lattices is more effective than the global cancellation. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Electro-optic frequency combs carrying orbital angular momentum

Authors: **ze He, Xingyu Jia, Bingyan Wei, Guanhao Wu, Yang Li

Abstract: To date, orbital angular momentum (OAM) and optical frequency combs (OFCs) are two distinct fields of research without any association. Herein, we generated OFCs with an OAM on each comb line by applying electro-optic phase modulation to the OAM beam. We verified that the OAM characteristic of the sidebands is consistent with that of the pump light. Our study bridges two distinct research fields O… ▽ More To date, orbital angular momentum (OAM) and optical frequency combs (OFCs) are two distinct fields of research without any association. Herein, we generated OFCs with an OAM on each comb line by applying electro-optic phase modulation to the OAM beam. We verified that the OAM characteristic of the sidebands is consistent with that of the pump light. Our study bridges two distinct research fields OFCs and OAM opening the door to various fundamental research avenues and applications, including large-capacity optical communications, high-security optical encryption, multi-dimensional photon entanglement, and synthetic dimensions. △ Less

Submitted 3 January, 2024; v1 submitted 14 February, 2023; originally announced February 2023.

Bottom-up approach to room temperature quantum systems

Authors: Bochao Wei, Chao Li, Ce Pei, Chandra Raman

Abstract: We demonstrate a key ingredient in a 'bottom-up' approach to building complex quantum matter using thermal atomic vapors. We have isolated and tracked very slowly moving individual atoms without the aid of laser cooling. Passive filtering enabled us to carefully select atoms whose three-dimensional velocity vector has a magnitude below $\bar{v}/20$, where $\bar{v}$ is the mean velocity of the ense… ▽ More We demonstrate a key ingredient in a 'bottom-up' approach to building complex quantum matter using thermal atomic vapors. We have isolated and tracked very slowly moving individual atoms without the aid of laser cooling. Passive filtering enabled us to carefully select atoms whose three-dimensional velocity vector has a magnitude below $\bar{v}/20$, where $\bar{v}$ is the mean velocity of the ensemble. Using a novel photon correlation technique, we could follow the three-dimensional trajectory of single, slowly moving atoms for $> 1μ$s within a $25μ$m field of view, with no obvious limit to the tracking ability while simultaneously observing Rabi oscillations of these single emitters. Our results demonstrate the power and scalability of thermal ensembles for utilization in quantum memories, imaging, and other quantum information applications through bottom-up approaches. △ Less

Submitted 7 December, 2022; originally announced December 2022.

Stimulated Laser Cooling Using Microfabrication

Authors: Chao Li, Xiao Chai, Linzhao Zhuo, Bochao Wei, Ardalan Lotfi, Farrokh Ayazi, Chandra Raman

Abstract: We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small size of the chip elements, we require only 8 mW, or nine times lower power than earlier free-space experiments on cesium [Aspect et al., Phys. Rev. Lett. 57, 1688… ▽ More We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small size of the chip elements, we require only 8 mW, or nine times lower power than earlier free-space experiments on cesium [Aspect et al., Phys. Rev. Lett. 57, 1688 (1986)]. Silicon micromirrors are fabricated and hand-assembled to precisely overlap a strong elliptical standing wave with a sheet-shaped atomic density distribution, with dimensions chosen precisely to match these. We reduce the transverse velocity spread to below 1 m/s within a total travel distance of 4.5 mm on a silicon substrate. We use Doppler-sensitive two-photon Raman spectroscopy to characterize the cooling. In contrast to time-of-flight methods utilized previously, this approach requires a much shorter apparatus to achieve similar resolution. This hybrid of passive and active collimation paves the way toward the construction of full-fledged atomic instruments, such as atomic beam clocks and gyroscopes, entirely on-chip through batch-fabricated processes. △ Less

Submitted 26 August, 2022; originally announced August 2022.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. Applied 20, 034042 (2023)

Spinful topological phases in acoustic crystals with projective PT symmetry

Authors: Yan Meng, Shuxin Lin, Bin-jie Shi, Bin Wei, Linyun Yang, Bei Yan, Zhenxiao Zhu, Xiang Xi, Yin Wang, Yong Ge, Shou-qi Yuan, **gming Chen, Guigeng Liu, Hongxiang Sun, Hongsheng Chen, Yihao Yang, Zhen Gao

Abstract: For the classification of topological phases of matter, an important consideration is whether a system is spinless or spinful, as these two classes have distinct symmetry algebra that gives rise to fundamentally different topological phases. However, only recently has it been realized theoretically that in the presence of gauge symmetry, the algebraic structure of symmetries can be projectively re… ▽ More For the classification of topological phases of matter, an important consideration is whether a system is spinless or spinful, as these two classes have distinct symmetry algebra that gives rise to fundamentally different topological phases. However, only recently has it been realized theoretically that in the presence of gauge symmetry, the algebraic structure of symmetries can be projectively represented, which possibly enables the switch between spinless and spinful topological phases. Here, we report the first experimental demonstration of this idea by realizing spinful topological phases in "spinless" acoustic crystals with projective space-time inversion symmetry. In particular, we realize a DIII-class one-dimensional topologically gapped phase characterized by a 2Z winding number, which features Kramers degenerate bands and Kramers pair of topological boundary modes. Our work thus overcomes a fundamental constraint on topological phases by spin classes. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Comments: 6 pages, 4 figures

Collimated versatile atomic beam source with alkali dispensers

Authors: Bochao Wei, Alexandra Crawford, Yorick Andeweg, Linzhao Zhuo, Chao Li, Chandra Raman

Abstract: Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 C) is undesirable for many applications, as it… ▽ More Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation as well as to moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on chip, where a localized, directed source of Rb vapor in small quantities is needed. △ Less

Submitted 14 February, 2022; originally announced February 2022.

Journal ref: Appl. Phys. Lett. 120, 144001 (2022)

Development of Gated Fiber Detectors for Laser-Induced Strong Electromagnetic Pulse Environments

Authors: Po Hu, Zhiguo Ma, Kai Zhao, Guoqiang Zhang, Deqing Fang, Baoren Wei, Changbo Fu, Yugang Ma

Abstract: With the development of laser technologies, nuclear reactions can happen in high-temperature plasma environments induced by lasers and have attracted a lot of attention from different physical disciplines. However, studies on nuclear reactions in plasma are still limited by detecting technologies. This is mainly due to the fact that extremely high electromagnetic pulses (EMPs) can also be induced… ▽ More With the development of laser technologies, nuclear reactions can happen in high-temperature plasma environments induced by lasers and have attracted a lot of attention from different physical disciplines. However, studies on nuclear reactions in plasma are still limited by detecting technologies. This is mainly due to the fact that extremely high electromagnetic pulses (EMPs) can also be induced when high-intensity lasers hit targets to induce plasma, and then cause dysfunction of many types of traditional detectors. Therefore, new particle detecting technologies are highly needed. In this paper, we report a recently developed gated fiber detector which can be used in harsh EMP environments. In this prototype detector, scintillating photons are coupled by fiber and then transferred to a gated photomultiplier tube which is located far away from the EMP source and shielded well. With those measures, the EMPs can be avoided, and this device has the capability to identify a single event of nuclear reaction products generated in laser-induced plasma from noise EMP backgrounds. This new type of detector can be widely used as a Time-of-Flight (TOF) detector in high-intensity laser nuclear physics experiments for detecting neutron, photons, and other charged particles. △ Less

Submitted 16 June, 2021; originally announced June 2021.

Comments: 9 pages; 6 figures

Prediction of three-phase relative permeabilities of Berea sandstone using lattice Boltzmann method

Authors: Sheng Li, Fei Jiang, Bei Wei, Jian Hou, Haihu Liu

Abstract: Three-phase flows through a pore network of Berea sandstone are studied numerically under critical interfacial tension condition. Results show that the relative permeability of each fluid increases as its own saturation increases. The specific interfacial length between wetting and non-wetting fluids monotonously decreases with increasing the saturation of intermediate-wetting fluid, while the oth… ▽ More Three-phase flows through a pore network of Berea sandstone are studied numerically under critical interfacial tension condition. Results show that the relative permeability of each fluid increases as its own saturation increases. The specific interfacial length between wetting and non-wetting fluids monotonously decreases with increasing the saturation of intermediate-wetting fluid, while the other two specific interfacial lengths exhibit a non-monotonous variation. As the wetting (non-wetting) fluid becomes less wetting (non-wetting), the relative permeability of wetting fluid monotonously increases, while the other two relative permeabilities show a non-monotonous trend. Due to the presence of spreading layer, the specific interfacial length between wetting and non-wetting fluids always stabilizes at a low level. As the viscosity ratio of wetting (non-wetting) to intermediate-wetting fluids increases, the relative permeability of wetting (non-wetting) fluid increases. With the viscosity ratio deviating from unity, the phase interfaces become increasingly unstable, leading to an increased specific interfacial length. △ Less

Submitted 15 March, 2021; originally announced March 2021.

Measurement of Absolute Single and Double Electron Capture Cross Sections for O6+ Ions Collision with CO2, CH4, H2 and N2

Authors: J. Han, L. Wei, B. Wang, B. Ren, W. Yu, Y. Zhang, Y. Zou, L. Chen, J. Xiao, B. Wei

Abstract: The absolute electron capture cross sections for single and double charge exchanges between the highly charged ions O6+ and CO2, CH4, H2, N2, the dominant collision processes in the solar wind, have been measured in the energy from 7 keV*q (2.63 keV/u) to 52 keV*q (19.5 keV/u). These measurements were carried out in the new experimental instrument set up at Fudan University, and the error of cross… ▽ More The absolute electron capture cross sections for single and double charge exchanges between the highly charged ions O6+ and CO2, CH4, H2, N2, the dominant collision processes in the solar wind, have been measured in the energy from 7 keV*q (2.63 keV/u) to 52 keV*q (19.5 keV/u). These measurements were carried out in the new experimental instrument set up at Fudan University, and the error of cross sections for single and double charge exchanges at the 1σ confidence level are about 11% and 16%, respectively. Limited agreement is achieved with single electron capture results calculated by the classical over-barrier model. These cross sections data are useful for simulation ion-neutral processes in astrophysical environments and to improve the present theoretical model of fundamental atomic processes. △ Less

Submitted 22 January, 2021; originally announced January 2021.

Comments: 9 pages, 4 pages

Mid-infrared spectrally-uncorrelated biphotons generation from doped PPLN: a theoretical investigation

Authors: Bei Wei, Wu-Hao Cai, Chunling Ding, Guang-Wei Deng, Ryosuke Shimizu, Qiang Zhou, Rui-Bo **

Abstract: We theoretically investigate the preparation of mid-infrared (MIR) spectrally-uncorrelated biphotons from a spontaneous parametric down-conversion process using doped LN crystals, including MgO doped LN, ZnO doped LN, and In2O3 doped ZnLN with do** ratio from 0 to 7 mol%. The tilt angle of the phase-matching function and the corresponding poling period are calculated under type-II, type-I, and t… ▽ More We theoretically investigate the preparation of mid-infrared (MIR) spectrally-uncorrelated biphotons from a spontaneous parametric down-conversion process using doped LN crystals, including MgO doped LN, ZnO doped LN, and In2O3 doped ZnLN with do** ratio from 0 to 7 mol%. The tilt angle of the phase-matching function and the corresponding poling period are calculated under type-II, type-I, and type-0 phase-matching conditions. We also calculate the thermal properties of the doped LN crystals and their performance in Hong-Ou-Mandel interference. It is found that the do** ratio has a substantial impact on the group-velocity-matching (GVM) wavelengths. Especially, the GVM2 wavelength of co-doped InZnLN crystal has a tunable range of 678.7 nm, which is much broader than the tunable range of less than 100 nm achieved by the conventional method of adjusting the temperature. It can be concluded that the do** ratio can be utilized as a degree of freedom to manipulate the biphoton state. The spectrally uncorrelated biphotons can be used to prepare pure single-photon source and entangled photon source, which may have promising applications for quantum-enhanced sensing, imaging, and communications at the MIR range. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Comments: 11 pages, 9 figures

Journal ref: Optics Express 29, 256-271 (2021)

High Quality factor micro-ring resonator for strong atom-light interactions using miniature atomic beams

Authors: Ali Eshaghian Dorche, Bochao Wei, Chandra Raman, Ali Adibi

Abstract: An integrated photonic platform is proposed for strong interactions between atomic beams and annealing-free high-quality-factor (Q) microresonators. We fabricated a thin-film, air-clad SiN microresonator with a loaded Q of $1.55\times10^6$ around the optical transition of $^{87}$Rb at $~780$ nm. This Q is achieved without annealing the devices at high temperatures, enabling future fully integrated… ▽ More An integrated photonic platform is proposed for strong interactions between atomic beams and annealing-free high-quality-factor (Q) microresonators. We fabricated a thin-film, air-clad SiN microresonator with a loaded Q of $1.55\times10^6$ around the optical transition of $^{87}$Rb at $~780$ nm. This Q is achieved without annealing the devices at high temperatures, enabling future fully integrated platforms containing optoelectronic circuitry as well. The estimated single-photon Rabi frequency (2g) is ${2\boldsymbolπ}\times$64 MHz at a height of 100 nm above the resonator. Our simulation result indicates that miniature atomic beams with a longitudinal speed of 0.2 m/s to 30 m/s will strongly interact with our resonator, allowing for the detection of single-atom transits and the realization of scalable single-atom photonic devices. Racetrack resonators with a similar Q can be used to detect thermal atomic beams with velocities around 300 m/s. △ Less

Submitted 2 August, 2020; originally announced August 2020.

Journal ref: Optics Letters 45.21 (2020): 5958-5961

Hybrid plasmonic nano-emitters with controlled single quantum emitter positioning on the local excitation field

Authors: Dandan Ge, Sylvie Marguet, Ali Issa, Safi Jradi, Tien Hoa Nguyen, Mackrine Nahra, Jéremie Béal, Régis Deturche, Hongshi Chen, Sylvain Blaize, Jérôme Plain, Céline Fiorini, Ludovic Douillard, Olivier Soppera, Xuan Quyen Dinh, Cuong Dang, Xuyong Yang, Tao Xu, Bin Wei, Xiao Wei Sun, Christophe Couteau, Renaud Bachelot

Abstract: Hybrid plasmonic nanoemitters based on the combination of quantum dot emitters (QD) and plasmonic nanoantennas open up new perspectives in the control of light. However, precise positioning of any active medium at the nanoscale constitutes a challenge. Here, we report on the optimal overlap of antenna's near-field and active medium whose spatial distribution is controlled via a plasmon-triggered 2… ▽ More Hybrid plasmonic nanoemitters based on the combination of quantum dot emitters (QD) and plasmonic nanoantennas open up new perspectives in the control of light. However, precise positioning of any active medium at the nanoscale constitutes a challenge. Here, we report on the optimal overlap of antenna's near-field and active medium whose spatial distribution is controlled via a plasmon-triggered 2-photon polymerization of a photosensitive formulation containing QDs. Au nanoparticles of various geometries are considered. The response of these hybrid nano-emitters is shown to be highly sensitive to the light polarization. Different light emission states are evidenced by photoluminescence measurements. These states correspond to polarization-sensitive nanoscale overlap between the exciting local field and the active medium distribution. The decrease of the QD concentration within the monomer formulation allows trap** of a single quantum dot in the vicinity of the Au particle. The latter objects show polarization-dependent switching in the single-photon regime. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Journal ref: Nature Communications 11, 3414 (2020)

Near source fluorescence spectroscopy for miniaturized thermal atomic beams

Authors: Chao Li, Bochao Wei, Xiao Chai, Jeremy Yang, Anosh Daruwalla, Farrokh Ayazi, C. Raman

Abstract: Miniature atomic beams can provide new functionalities for atom based sensing instruments such as atomic clocks and interferometers. We recently demonstrated a planar silicon device for generating well-collimated thermal atomic beams [Nat Commun 10, 1831 (2019)]. Here, we present a near-source fluorescence spectroscopy (NSFS) technique that can fully characterize such miniature beams even when mea… ▽ More Miniature atomic beams can provide new functionalities for atom based sensing instruments such as atomic clocks and interferometers. We recently demonstrated a planar silicon device for generating well-collimated thermal atomic beams [Nat Commun 10, 1831 (2019)]. Here, we present a near-source fluorescence spectroscopy (NSFS) technique that can fully characterize such miniature beams even when measured only a few millimeters from the nozzle exit. We also present a recipe for predicting the fluorescence spectrum, and therefore, the source angular distribution, even under conditions of strong laser saturation of the probing transition. Monte Carlo simulations together with multi-level master equation calculations fully account for the influence of optical pum** and spatial extension of the Gaussian laser beam. A notable consequence of this work is the agreement between theory and experimental data that has allowed fine details of the angular distribution of the collimator to be resolved over 3 decades of dynamic range of atomic beam output flux. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. Research 2, 023239 (2020)

Hybrid exceptional point created from type III Dirac point

Authors: L. **, H. C. Wu, Bo-Bo Wei, Z. Song

Abstract: Degeneracy (exceptional) points embedded in energy band are distinct by their topological features. We report different hybrid two-state coalescences (EP2s) formed through merging two EP2s with opposite chiralities that created from the type III Dirac points emerging from a flat band. The band touching hybrid EP2, which is isolated, is induced by the destructive interference at the proper match be… ▽ More Degeneracy (exceptional) points embedded in energy band are distinct by their topological features. We report different hybrid two-state coalescences (EP2s) formed through merging two EP2s with opposite chiralities that created from the type III Dirac points emerging from a flat band. The band touching hybrid EP2, which is isolated, is induced by the destructive interference at the proper match between non-Hermiticity and synthetic magnetic flux. The degeneracy points and different types of exceptional points are distinguishable by their topological features of global geometric phase associated with the scaling exponent of phase rigidity. Our findings not only pave the way of merging EPs but also shed light on the future investigations of non-Hermitian topological phases. △ Less

Submitted 27 January, 2020; v1 submitted 27 August, 2019; originally announced August 2019.

Comments: 10 pages, 10 figures

Journal ref: Phys. Rev. B 101, 045130 (2020)

Optically active beams: non-reciprocal optical activity in free space induced by spin-orbital interaction of light

Authors: Sheng Liu, Shuxia Qi, Peng Li, Bingyan Wei, Peng Chen, Wei Hu, Yi Zhang, Xuetao Gan, Peng Zhang, Yanqing Lu, Zhigang Chen, Jianlin Zhao

Abstract: Optical activity, the power of a medium to rotate the polarization of a light beam, has contributed significantly to molecular structure assessments in stereochemistry, biomolecular science and crystallography. Thus far, it is commonly believed that optical activity is manifested only in the chiral media which can give rise to circular birefringence of light. Here, we experimentally demonstrate th… ▽ More Optical activity, the power of a medium to rotate the polarization of a light beam, has contributed significantly to molecular structure assessments in stereochemistry, biomolecular science and crystallography. Thus far, it is commonly believed that optical activity is manifested only in the chiral media which can give rise to circular birefringence of light. Here, we experimentally demonstrate that free space can also support the implementation of non-reciprocal optical activity with Bessel beams by spin-orbital interaction. Specifically, non-diffractive optically active beams are realized, with their optical rotatory power readily controlled by simple optical elements. We show that such free-space optical activity can be exploited to form non-reciprocal optical components such as polarization rotators, isolators, and circulators. Our results may bring about new possibilities of media-independent optical activity to other transverse waves ranging from radio to optical frequencies. △ Less

Submitted 26 August, 2019; originally announced August 2019.

A low-energy compact Shanghai-Wuhan electron beam ion trap for extraction of highly charged ions

Authors: Shiyong Liang, Qifeng Lu, Xincheng Wang, Yang Yang, Ke Yao, Yang Shen, Baoren Wei, Jun Xiao, Shaolong Chen, Pengpeng Zhou, Wei Sun, Yonghui Zhang, Yao Huang, Hua Guan, Xin Tong, Chengbin Li, Yaming Zou, Tingyun Shi, Kelin Gao

Abstract: A low-energy, compact and superconducting electron beam ion trap (the Shanghai-Wuhan EBIT or SW-EBIT) for extraction of highly charged ions is presented. The magnetic field in the central drift tube of the SW-EBIT is approximately 0.21 T produced by a pair of high-temperature superconducting coils. The electron-beam energy of the SW-EBIT is in the range of 30-4000 eV, and the maximum electron-beam… ▽ More A low-energy, compact and superconducting electron beam ion trap (the Shanghai-Wuhan EBIT or SW-EBIT) for extraction of highly charged ions is presented. The magnetic field in the central drift tube of the SW-EBIT is approximately 0.21 T produced by a pair of high-temperature superconducting coils. The electron-beam energy of the SW-EBIT is in the range of 30-4000 eV, and the maximum electron-beam current is up to 9 mA. Acting as a source of highly charged ions, the ion-beam optics for extraction is integrated, including an ion extractor and an einzel lens. A Wien filter is then used to measure the charge-state distribution of the extracted ions. In this work, the tungsten ions below the charge state of 15 have been produced, extracted, and analyzed. The charge-state distributions and spectra in the range of 530-580 nm of tungsten ions have been measured simultaneously with the electron-beam energy of 279 eV and 300 eV, which preliminarily indicates that the 549.9 nm line comes from $W^{14+}$. △ Less

Submitted 7 September, 2019; v1 submitted 26 June, 2019; originally announced June 2019.

Comments: This article has been published on Review of Scientific Instruments. Available at https://doi.org/10.1063/1.5112154

Journal ref: Rev. Sci. Instrum. 90, 093301 (2019)

Few-shot machine learning in the three-dimensional Ising model

Authors: Rui Zhang, Bin Wei, Dong Zhang, Jia-Ji Zhu, Kai Chang

Abstract: We investigate theoretically the phase transition in three dimensional cubic Ising model utilizing state-of-the-art machine learning algorithms. Supervised machine learning models show high accuracies (~99\%) in phase classification and very small relative errors ($< 10^{-4}$) of the energies in different spin configurations. Unsupervised machine learning models are introduced to study the spin co… ▽ More We investigate theoretically the phase transition in three dimensional cubic Ising model utilizing state-of-the-art machine learning algorithms. Supervised machine learning models show high accuracies (~99\%) in phase classification and very small relative errors ($< 10^{-4}$) of the energies in different spin configurations. Unsupervised machine learning models are introduced to study the spin configuration reconstructions and reductions, and the phases of reconstructed spin configurations can be accurately classified by a linear logistic algorithm. Based on the comparison between various machine learning models, we develop a few-shot strategy to predict phase transitions in larger lattices from trained sample in smaller lattices. The few-shot machine learning strategy for three dimensional(3D) Ising model enable us to study 3D ising model efficiently and provides a new integrated and highly accurate approach to other spin models. △ Less

Submitted 20 March, 2019; v1 submitted 19 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. B 99, 094427(2019)

Mechanical Properties of Ultralow Density Graphene Oxide/Polydimethylsiloxane Foams

Authors: Cristiano F. Woellner, Peter S. Owuor, Tong Li, Soumya Vinod, Sehmus Ozden, Suppanat Kosolwattana, Sanjit Bhowmick, Luong X. Duy, Rodrigo V. Salvatierra, Bingqing Wei, Syed A. S. Asif, James M. Tour, Robert Vajtai, Jun Lou, Douglas S. Galvao, Chandra S. Tiwary, Pulickel. M. Ajayan

Abstract: Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical prop… ▽ More Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical properties are mainly attributed to the intrinsic graphene and/or GO electronic and mechanical properties. Despite the attractive physical properties of graphene/GO based-foams, their structural and thermal stabilities are still a problem for some applications. For instance, they are easily degraded when placed in flowing solutions, either by the collapsing of their layers or just by structural disintegration into small pieces. Recently, a new and scalable synthetic approach to produce low-density 3D macroscopic GO structure interconnected with polydimethylsiloxane (PDMS) polymeric chains (pGO) was proposed. A controlled amount of PDMS is infused into the freeze-dried foam resulting into a very rigid structure with improved mechanical properties, such as tensile plasticity and toughness. The PDMS wets the graphene oxide sheets and acts like a glue bonding PDMS and GO sheets. In order to obtain further insights on mechanisms behind the enhanced mechanical pGO response we carried out fully atomistic molecular dynamics (MD) simulations. Based on MD results, we build up a structural model that can explain the experimentally observed mechanical behavior. △ Less

Submitted 18 January, 2018; originally announced January 2018.

Monte Carlo Simulation for Polychromatic X-ray Fluorescence Computed Tomography with Sheet-Beam Geometry

Authors: Shanghai Jiang, Peng He, Luzhen Deng, Mianyi Chen, Biao Wei

Abstract: X-ray fluorescence computed tomography based on sheet-beam can save a huge amount of time to obtain a whole set of projections using synchrotron. However, it is clearly unpractical for most biomedical research laboratories. In this paper, polychromatic X-ray fluorescence computed tomography with sheet-beam geometry is tested by Monte Carlo simulation. First, two phantoms (A and B) filled with PMMA… ▽ More X-ray fluorescence computed tomography based on sheet-beam can save a huge amount of time to obtain a whole set of projections using synchrotron. However, it is clearly unpractical for most biomedical research laboratories. In this paper, polychromatic X-ray fluorescence computed tomography with sheet-beam geometry is tested by Monte Carlo simulation. First, two phantoms (A and B) filled with PMMA are used to simulate imaging process through GEANT 4. Phantom A contains several GNP-loaded regions with the same size (10 mm) in height and diameter but different Au weight concentration ranging from 0.3% to 1.8%. Phantom B contains twelve GNP-loaded regions with the same Au weight concentration (1.6%) but different diameter ranging from 1mm to 9mm. Second, discretized presentation of imaging model is established to reconstruct more accurate XFCT images. Third, XFCT images of phantom A and B are reconstructed by fliter backprojection (FBP) and maximum likelihood expectation maximization (MLEM) with and without correction, respectively. Contrast to noise ratio (CNR) is calculated to evaluate all the reconstructed images. Our results show that it is feasible for sheet-beam XFCT system based on polychromatic X-ray source and the discretized imaging model can be used to reconstruct more accurate images. △ Less

Submitted 4 March, 2017; originally announced March 2017.

Dual Fano and Lorentzian line profile poperties of autoionizing states

Authors: B. Tu, J. Xiao, K. Yao, Y. Shen, Y. Yang, D. Lu, W. X. Li, M. L. Qiu, X. Wang, C. Y. Chen, Y. Q. Fu, B. Wei, C. Zheng, L. Y. Huang, R. Hutton, Y. Zou

Abstract: Ott et al. (Science (340, 716 (2013)) successfully transferred Fano profile into Lorentzian lineshape using an intense infrared laser, after excitation of autoionizing states in helium by attosecond XUV pulse. This is a very important step forward of quantum phase control. However, here we show experimentally that an autoionizing state can have both Fano and Lorentzian behavior naturally, dependin… ▽ More Ott et al. (Science (340, 716 (2013)) successfully transferred Fano profile into Lorentzian lineshape using an intense infrared laser, after excitation of autoionizing states in helium by attosecond XUV pulse. This is a very important step forward of quantum phase control. However, here we show experimentally that an autoionizing state can have both Fano and Lorentzian behavior naturally, depending on the process involved. This study utilized the inverse process of photon absorption ionization, i.e. electron ion recombination with photon emission, making sure the resonant autoionizing state is not perturbed by the laser fields. Our result implies that excitation of the state through different paths can lead to different Fano profiles for the same resonant state. This allows more options for the combination of laser fields and lead to more opportunities for quantum phase control. Our result also indicates the breakdown of the classical two step picture for dielectronic recombination. △ Less

Submitted 22 April, 2015; originally announced April 2015.

Comments: 13 pages, 4 figuers

An improved vulnerability index of complex networks based on fractal dimension

Authors: Li Gou, Bo Wei, Rehan Sadiq, Sankaran Mahadevan, Yong Deng

Abstract: With an increasing emphasis on network security, much more attention has been attracted to the vulnerability of complex networks. The multi-scale evaluation of vulnerability is widely used since it makes use of combined powers of the links' betweenness and has an effective evaluation to vulnerability. However, how to determine the coefficient in existing multi-scale evaluation model to measure the… ▽ More With an increasing emphasis on network security, much more attention has been attracted to the vulnerability of complex networks. The multi-scale evaluation of vulnerability is widely used since it makes use of combined powers of the links' betweenness and has an effective evaluation to vulnerability. However, how to determine the coefficient in existing multi-scale evaluation model to measure the vulnerability of different networks is still an open issue. In this paper, an improved model based on the fractal dimension of complex networks is proposed to obtain a more reasonable evaluation of vulnerability with more physical significance. Not only the structure and basic physical properties of networks is characterized, but also the covering ability of networks, which is related to the vulnerability of the network, is taken into consideration in our proposed method. The numerical examples and real applications are used to illustrate the efficiency of our proposed method. △ Less

Submitted 2 June, 2014; originally announced June 2014.

Multi-fractal analysis of weighted networks

Authors: Daijun Wei, Xiaowu Chen, Cai Gao, Haixin Zhang, Bo Wei, Yong Deng

Abstract: In many real complex networks, the fractal and self-similarity properties have been found. The fractal dimension is a useful method to describe fractal property of complex networks. Fractal analysis is inadequate if only taking one fractal dimension to study complex networks. In this case, multifractal analysis of complex networks are concerned. However, multifractal dimension of weighted networks… ▽ More In many real complex networks, the fractal and self-similarity properties have been found. The fractal dimension is a useful method to describe fractal property of complex networks. Fractal analysis is inadequate if only taking one fractal dimension to study complex networks. In this case, multifractal analysis of complex networks are concerned. However, multifractal dimension of weighted networks are less involved. In this paper, multifractal dimension of weighted networks is proposed based on box-covering algorithm for fractal dimension of weighted networks (BCANw). The proposed method is applied to calculate the fractal dimensions of some real networks. Our numerical results indicate that the proposed method is efficient for analysis fractal property of weighted networks. △ Less

Submitted 28 February, 2014; originally announced February 2014.

A new information dimension of complex networks

Authors: Daijun Wei, Bo Wei, Yong Hu, Haixin Zhang, Yong Deng

Abstract: The fractal and self-similarity properties are revealed in many real complex networks. However, the classical information dimension of complex networks is not practical for real complex networks. In this paper, a new information dimension to characterize the dimension of complex networks is proposed. The difference of information for each box in the box-covering algorithm of complex networks is co… ▽ More The fractal and self-similarity properties are revealed in many real complex networks. However, the classical information dimension of complex networks is not practical for real complex networks. In this paper, a new information dimension to characterize the dimension of complex networks is proposed. The difference of information for each box in the box-covering algorithm of complex networks is considered by this measure. The proposed method is applied to calculate the fractal dimensions of some real networks. Our results show that the proposed method is efficient for fractal dimension of complex networks. △ Less

Submitted 14 November, 2013; originally announced November 2013.

Comments: 14 pages, 2 figures

Analytic Comparison between X-ray Fluorescence CT and K-edge CT

Authors: Peng Feng, Ge Wang, Wenxiang Cong, Biao Wei

Abstract: X-ray fluorescence computed tomography (XFCT) and K-edge computed tomography (CT) are two important modalities to quantify a distribution of gold nanoparticles (GNPs) in a small animal for preclinical studies. It is valuable to determine which modality is more efficient for a given application. In this paper, we report a theoretical analysis in terms of signal-to-noise ratio (SNR) for the two moda… ▽ More X-ray fluorescence computed tomography (XFCT) and K-edge computed tomography (CT) are two important modalities to quantify a distribution of gold nanoparticles (GNPs) in a small animal for preclinical studies. It is valuable to determine which modality is more efficient for a given application. In this paper, we report a theoretical analysis in terms of signal-to-noise ratio (SNR) for the two modalities, showing that there is a threshold for the GNPs concentration and XFCT has a better SNR than K-edge CT if GNPs concentration is less than this threshold. Numerical simulations are performed and two kinds of phantoms are used to represent multiple concentration levels and feature sizes. Experimental results illustrate that XFCT is superior to K-edge CT when contrast concentration is lower than 0.4% which coincides with the theoretical analysis. △ Less

Submitted 5 April, 2013; originally announced April 2013.

Comments: 10 pages, 9 figures, two lemmas

Measurements of Baryon Pair Decays of $χ_{cJ}$ Mesons

Authors: M. Ablikim, M. N. Achasov, O. Albayrak, D. J. Ambrose, F. F. An, Q. An, J. Z. Bai, Y. Ban, J. Becker, J. V. Bennett, M. Bertani, J. M. Bian, E. Boger, O. Bondarenko, I. Boyko, R. A. Briere, V. Bytev, X. Cai, O. Cakir, A. Calcaterra, G. F. Cao, S. A. Cetin, J. F. Chang, G. Chelkov, G. Chen , et al. (326 additional authors not shown)

Abstract: Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$,… ▽ More Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$, $(20.8 \pm 1.6 \pm 2.3)\times 10^{-5}$; $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{0}\barΣ^{0})$ = $(47.8 \pm 3.4 \pm 3.9)\times 10^{-5}$, $(3.8 \pm 1.0 \pm 0.5)\times 10^{-5}$, $(4.0 \pm 1.1 \pm 0.5) \times 10^{-5}$; and $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{+}\barΣ^{-})$ = $(45.4 \pm 4.2 \pm 3.0)\times 10^{-5}$, $(5.4 \pm 1.5 \pm 0.5)\times 10^{-5}$, $(4.9 \pm 1.9 \pm 0.7)\times 10^{-5}$, where the first error is statistical and the second is systematic. Upper limits on the branching fractions for the decays of $χ_{c1,2}\rightarrowΣ^{0}\barΣ^{0}$, $Σ^{+}\barΣ^{-}$, are estimated to be $\cal{B}$$(χ_{c1}\rightarrowΣ^{0}\barΣ^{0}) < 6.2\times 10^{-5}$, $\cal{B}$$(χ_{c2}\rightarrowΣ^{0}\barΣ^{0}) < 6.5\times 10^{-5}$, $\cal{B}$$(χ_{c1}\rightarrowΣ^{+}\barΣ^{-}) < 8.7\times 10^{-5}$ and $\cal{B}$$(χ_{c2}\rightarrowΣ^{+}\barΣ^{-}) < 8.8\times 10^{-5}$ at the 90% confidence level. △ Less

Submitted 4 March, 2013; v1 submitted 9 November, 2012; originally announced November 2012.

Comments: 13 pages, 7 figures, 3 tables

Journal ref: Phys. Rev. D 87, 032007 (2013)