-
Jointed Tails Enhance Control of Three-dimensional Body Rotation
Authors:
Xun Fu,
Bohao Zhang,
Ceri J. Weber,
Kimberly L. Cooper,
Ram Vasudevan,
Talia Y. Moore
Abstract:
Tails used as inertial appendages induce body rotations of animals and robots, a phenomenon that is governed largely by the ratio of the body and tail moments of inertia. However, vertebrate tails have more degrees of freedom (e.g., number of joints, rotational axes) than most current theoretical models and robotic tails. To understand how morphology affects inertial appendage function, we develop…
▽ More
Tails used as inertial appendages induce body rotations of animals and robots, a phenomenon that is governed largely by the ratio of the body and tail moments of inertia. However, vertebrate tails have more degrees of freedom (e.g., number of joints, rotational axes) than most current theoretical models and robotic tails. To understand how morphology affects inertial appendage function, we developed an optimization-based approach that finds the maximally effective tail trajectory and measures error from a target trajectory. For tails of equal total length and mass, increasing the number of equal-length joints increased the complexity of maximally effective tail motions. When we optimized the relative lengths of tail bones while kee** the total tail length, mass, and number of joints the same, this optimization-based approach found that the lengths match the pattern found in the tail bones of mammals specialized for inertial maneuvering. In both experiments, adding joints enhanced the performance of the inertial appendage, but with diminishing returns, largely due to the total control effort constraint. This optimization-based simulation can compare the maximum performance of diverse inertial appendages that dynamically vary in moment of inertia in 3D space, predict inertial capabilities from skeletal data, and inform the design of robotic inertial appendages.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Multiphase Flow Simulation of Blow-by and Fuel-in-Oil Dilution via the Piston Ring Pack Using the CFD Level-Set Method
Authors:
Patrick Antony,
Norbert Hosters,
Marek Behr,
Anselm Hopf,
Frank Krämer,
Carsten Weber,
Paul Turner
Abstract:
Modern diesel engines temporarily use a very late post-injection in the combustion cycle to either generate heat for a diesel particulate filter regeneration or purge a lean NOx trap. In some configurations, unburned fuel is left at the cylinder walls and is transported via the piston rings toward the lower crankcase region, where fuel may dilute the oil. Reduced oil lubrication shortens the oil s…
▽ More
Modern diesel engines temporarily use a very late post-injection in the combustion cycle to either generate heat for a diesel particulate filter regeneration or purge a lean NOx trap. In some configurations, unburned fuel is left at the cylinder walls and is transported via the piston rings toward the lower crankcase region, where fuel may dilute the oil. Reduced oil lubrication shortens the oil service intervals and increases friction. Beside diesel fuel, this problem may also occur for other types of liquid fuels such as alcohols and e-fuels. The exact transport mechanism of the unburned fuel via the piston ring pack grooves and cylinder wall is hard to measure experimentally, motivating numerical flow simulation in early design stages for an in-depth understanding of the involved processes. A new CFD simulation methodology has been developed to investigate the transient, compressible, multiphase flow around the piston ring pack, through the gap between piston and liner, and its impact on fuel or oil transport. The modern level-set approach is used for the multiphase physics, which directly captures the sharp interface between blow-by gas and fuel or oil. Transient blow-by and two-phase flow simulations have been extensively applied to a Ford 2.0L I4 diesel test engine. The results confirm the validity of the flow compressibility assumption and highlight the sensitivity of the fuel leakage regarding piston sealing ring movement and highly resolved meshes for the multiphase flow. Based on the simulation results, design recommendations for piston and piston ring geometry are provided to reduce the fuel transport toward the crankcase.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Clinical utility of automatic treatment planning for proton therapy of head-and-neck cancer patients using JulianA
Authors:
Renato Bellotti,
Alexey Cherchik,
Jonas Willmann,
A. Lomax,
Damien Charles Weber,
Jan Hrbacek
Abstract:
Background: Automatic treatment planning promises many benefits for both research and clinical environments. For clinics, autoplanning promises to reduce planning time and achieve more comparable treatment plans and thereby reduce inter-planner variability. Further, it can assist clinicians in quality assurance by providing a minimum plan quality standard. Finally, autoplanning is an essential par…
▽ More
Background: Automatic treatment planning promises many benefits for both research and clinical environments. For clinics, autoplanning promises to reduce planning time and achieve more comparable treatment plans and thereby reduce inter-planner variability. Further, it can assist clinicians in quality assurance by providing a minimum plan quality standard. Finally, autoplanning is an essential part of patient selection, which is crucial for the advancement of proton therapy itself.
Methods: A retrospective planning study using a cohort of 17 head-and-neck cancer patients treated at our institute. The clinically accepted plans created by dosimetrists (d-plans) were compared to automatically generated JulianA plans (j-plans). Both methods used the same beam arrangement. The plans were analysed by two expert reviewers without knowing how each plan was created. They assessed the plan quality and stated a preference.
Results: All of the j-plans were deemed rather or clearly acceptable, resulting in a higher acceptability than the d-plans. The j-plan was considered superior in 14 (82.4%) cases, of equal quality for 1 (5.9%) and inferior to the d-plan for only 2 (11.8%) of the cases. The reviewers concluded that JulianA achieves more conformal dose distributions for the 15 (88.2%) cases where the j-plans were at least as good as the d-plans.
Conclusions: The results show that the JulianA is ready to be used as a clinical quality assurance tool and research platform at our institute. While these results are encouraging, further research is needed to reduce the number of spots further and introduce robustness considerations into the optimisation algorithm in order to employ it on a daily basis for patient treatment.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
Design and Modeling of Indirectly-Driven Magnetized Implosions on the NIF
Authors:
D. J. Strozzi,
H. Sio,
G. B. Zimmerman,
J. D. Moody,
C. R. Weber,
B. Z. Djordjevic,
C. A. Walsh,
B. A. Hammel,
B. B. Pollock,
A. Povilus
Abstract:
The use of magnetic fields to improve the performance of hohlraum-driven implosions on the National Ignition Facility (NIF) is discussed. The focus is on magnetically insulated inertial confinement fusion (ICF), where the primary field effect is to reduce electron-thermal and alpha-particle loss from the compressed hotspot (magnetic pressure is of secondary importance). We summarize the requiremen…
▽ More
The use of magnetic fields to improve the performance of hohlraum-driven implosions on the National Ignition Facility (NIF) is discussed. The focus is on magnetically insulated inertial confinement fusion (ICF), where the primary field effect is to reduce electron-thermal and alpha-particle loss from the compressed hotspot (magnetic pressure is of secondary importance). We summarize the requirements to achieve this state. The design of recent NIF magnetized hohlraum experiments is presented. These are close to earlier shots in the three-shock, high-adiabat (BigFoot) campaign, subject to the constraints that magnetized NIF targets must be fielded at room-temperature, and use < 1 MJ of laser energy to avoid risk of optics damage from stimulated Brillouin scattering. We present results from the original magnetized hohlraum platform, as well as a later variant which gives higher hotspot temperature. In both platforms, imposed fields (at the capsule center) of up to 28 T increase the fusion yield and hotspot temperature. Integrated radiation-magneto-hydrodynamic (rad-MHD) modeling with the Lasnex code of these shots is shown, where laser power multipliers and a saturation clamp on cross-beam energy transfer (CBET) are developed to match the time of peak capsule emission and the P2 Legendre moment of the hotspot x-ray image. The resulting fusion yield and ion temperature agree decently with the measured relative effects of the field, although the absolute simulated yields are higher than the data by 2.0-2.7X. The tuned parameters and yield discrepancy are comparable for experiments with and without an imposed field, indicating the model adequately captures the field effects. Self-generated and imposed fields are added sequentially to simulations of one BigFoot NIF shot to understand how they alter target dynamics.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Theory of Wetting Dynamics with Surface Binding
Authors:
Xue** Zhao,
Susanne Liese,
Alf Honigmann,
Frank Jülicher,
Christoph A. Weber
Abstract:
Biomolecules, such as proteins and RNAs, can phase separate in the cytoplasm of cells to form biological condensates. Such condensates are liquid-like droplets that can wet biological surfaces such as membranes. Many molecules that can participate in phase separation can also reversibly bind to membrane surfaces. When a droplet wets such a surface, these molecules can diffuse both inside the dropl…
▽ More
Biomolecules, such as proteins and RNAs, can phase separate in the cytoplasm of cells to form biological condensates. Such condensates are liquid-like droplets that can wet biological surfaces such as membranes. Many molecules that can participate in phase separation can also reversibly bind to membrane surfaces. When a droplet wets such a surface, these molecules can diffuse both inside the droplet or in the bound state on the surface. How the interplay between surface binding and surface diffusion affects the wetting kinetics is not well understood. Here, we derive the governing equations using non-equilibrium thermodynamics by relating the diffusive fluxes and forces at the surface coupled to the bulk. We use our theory to study the spreading kinetics in the presence of surface binding and find that binding speeds up wetting by nucleating a droplet inside the surface. Our results are relevant both to artificial systems and to condensates in cells. They suggest that the wetting of droplets in living cells could be regulated by two-dimensional droplets in the surface-bound layer changing the binding affinity to biological surfaces.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
A Unified Generation-Registration Framework for Improved MR-based CT Synthesis in Proton Therapy
Authors:
Xia Li,
Renato Bellotti,
Barbara Bachtiary,
Jan Hrbacek,
Damien C. Weber,
Antony J. Lomax,
Joachim M. Buhmann,
Ye Zhang
Abstract:
Background: In MR-guided proton therapy planning, aligning MR and CT images is key for MR-based CT synthesis, especially in mobile regions like the head-and-neck. Misalignments here can lead to less accurate synthetic CT (sCT) images, impacting treatment precision. Purpose: This study introduces a novel network that cohesively unifies image generation and registration processes to enhance the qual…
▽ More
Background: In MR-guided proton therapy planning, aligning MR and CT images is key for MR-based CT synthesis, especially in mobile regions like the head-and-neck. Misalignments here can lead to less accurate synthetic CT (sCT) images, impacting treatment precision. Purpose: This study introduces a novel network that cohesively unifies image generation and registration processes to enhance the quality and anatomical fidelity of sCTs derived from better-aligned MR images. Methods: The approach synergizes a generation network (G) with a deformable registration network (R), optimizing them jointly in MR-to-CT synthesis. This goal is achieved by alternately minimizing the discrepancies between the generated/registered CT images and their corresponding reference CT counterparts. The generation network employs a UNet architecture, while the registration network leverages an implicit neural representation of the Deformable Vector Fields (DVFs). We validated this method on a dataset comprising 60 Head-and-Neck patients, reserving 12 cases for holdout testing. Results: Compared to the baseline Pix2Pix method with MAE 124.95\pm 30.74 HU, the proposed technique demonstrated 80.98\pm 7.55 HU. The unified translation-registration network produced sharper and more anatomically congruent outputs, showing superior efficacy in converting MR images to sCTs. Additionally, from a dosimetric perspective, the plan recalculated on the resulting sCTs resulted in a remarkably reduced discrepancy to the reference proton plans. Conclusions: This study conclusively demonstrates that a holistic MR-based CT synthesis approach, integrating both image-to-image translation and deformable registration, significantly improves the precision and quality of sCT generation, particularly for the challenging body area with varied anatomic changes between corresponding MR and CT.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Chemically Active Wetting
Authors:
Susanne Liese,
Xue** Zhao,
Christoph A. Weber,
Frank Jülicher
Abstract:
Wetting of liquid droplets on passive surfaces is ubiquitous in our daily lives, and the governing physical laws are well-understood. When surfaces become active, however, the governing laws of wetting remain elusive. Here we propose chemically active wetting as a new class of active systems where the surface is active due to a binding process that is maintained away from equilibrium. We derive th…
▽ More
Wetting of liquid droplets on passive surfaces is ubiquitous in our daily lives, and the governing physical laws are well-understood. When surfaces become active, however, the governing laws of wetting remain elusive. Here we propose chemically active wetting as a new class of active systems where the surface is active due to a binding process that is maintained away from equilibrium. We derive the corresponding non-equilibrium thermodynamic theory and show that active binding fundamentally changes the wetting behavior, leading to steady, non-equilibrium states with droplet shapes reminiscent of a pancake or a mushroom. The origin of such anomalous shapes can be explained by map** to electrostatics, where pairs of binding sinks and sources correspond to electrostatic dipoles along the triple line. This is an example of a more general analogy, where localized chemical activity gives rise to a multipole field of the chemical potential. The underlying physics is relevant for cells, where droplet-forming proteins can bind to membranes accompanied by the turnover of biological fuels.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
A simulation method for the wetting dynamics of liquid droplets on deformable membranes
Authors:
Marcel Mokbel,
Dominic Mokbel,
Susanne Liese,
Christoph A. Weber,
Sebastian Aland
Abstract:
Biological cells utilize membranes and liquid-like droplets, known as biomolecular condensates, to structure their interior. The interaction of droplets and membranes, despite being involved in several key biological processes, is so far little understood. Here, we present a first numerical method to simulate the continuum dynamics of droplets interacting with deformable membranes via wetting. The…
▽ More
Biological cells utilize membranes and liquid-like droplets, known as biomolecular condensates, to structure their interior. The interaction of droplets and membranes, despite being involved in several key biological processes, is so far little understood. Here, we present a first numerical method to simulate the continuum dynamics of droplets interacting with deformable membranes via wetting. The method combines the advantages of the phase-field method for multi-phase flow simulation and the arbitrary Lagrangian-Eulerian (ALE) method for an explicit description of the elastic surface. The model is thermodynamically consistent, coupling bulk hydrodynamics with capillary forces, as well as bending, tension, and stretching of a thin membrane. The method is validated by comparing simulations for single droplets to theoretical results of shape equations, and its capabilities are illustrated in 2D and 3D axisymmetric scenarios.
△ Less
Submitted 20 February, 2024; v1 submitted 4 December, 2023;
originally announced December 2023.
-
Resistive Diffusion in Magnetized ICF Implosions: Reduced Magnetic Stabilization of the Richtmyer Meshkov Instability
Authors:
C. A. Walsh,
D. J. Strozzi,
H. Sio,
B. B. Pollock,
B. D. Appelbe,
A. J. Crilly,
S. O'Neill,
C. Weber,
J. P. Chittenden,
J. D. Moody
Abstract:
Resistive diffusion is typically regarded to be negligible in magnetized ICF experiments, with magnetic flux effectively compressed during the implosion. In this work the Richtmyer Meshkov instability at the ice-ablator interface is taken as an example for investigating resistive effects. For a high temperature (approximately 100eV) interface with magnetic field applied perpendicular to shock prop…
▽ More
Resistive diffusion is typically regarded to be negligible in magnetized ICF experiments, with magnetic flux effectively compressed during the implosion. In this work the Richtmyer Meshkov instability at the ice-ablator interface is taken as an example for investigating resistive effects. For a high temperature (approximately 100eV) interface with magnetic field applied perpendicular to shock propagation, perturbation growth is suppressed by magnetic tension. However, for lower temperature interfaces the resistive diffusion prevents substantial magnetic field twisting at small scales. ICF implosion simulations are then used to assess magnetic diffusivity at different interfaces; the ice-ablator interface is found to be too resistive for the magnetic fields to enhance stability. For Rayleigh-Taylor growth at the hot-spot edge, on the other hand, resistivity is estimated to only be a secondary effect, as seen in previous simulation studies.
△ Less
Submitted 7 November, 2023; v1 submitted 2 November, 2023;
originally announced November 2023.
-
Results and Limits of Time Division Multiplexing for the BICEP Array High Frequency Receivers
Authors:
S. Fatigoni,
P. A. R. Ade,
Z. Ahmed,
M. Amiri,
D. Barkats,
R. Basu Thakur,
C. A. Bischoff,
D. Beck,
J. J. Bock,
V. Buza,
J. Cheshire,
J. Connors,
J. Cornelison,
M. Crumrine,
A. J. Cukierman,
E. V. Denison,
M. I. Dierickx,
L. Duband,
M. Eiben,
J. P. Filippini,
A. Fortes,
M. Gao,
C. Giannakopoulos,
N. Goeckner-Wald,
D. C. Goldfinger
, et al. (62 additional authors not shown)
Abstract:
Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the…
▽ More
Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard Multi Channel Electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates Time Division Multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and crosstalk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Future experiments like CMB-S4 plan to use TES bolometers with Time Division/SQUID-based readout for an even larger number of detectors.
△ Less
Submitted 24 October, 2023; v1 submitted 16 October, 2023;
originally announced October 2023.
-
Charge Separation at Interfaces of Phase-Separated Coacervates
Authors:
Arghya Majee,
Christoph A. Weber,
Frank Jülicher
Abstract:
We present a theory for phase-separated liquid coacervates with salt, taking into account spatial heterogeneities and interfacial profiles. We find that charged layers of alternating sign can form around the interface while the bulk phases remain approximately charge-neutral. We show that the salt concentration regulates the number of layers and the amplitude of the layer's charge density and elec…
▽ More
We present a theory for phase-separated liquid coacervates with salt, taking into account spatial heterogeneities and interfacial profiles. We find that charged layers of alternating sign can form around the interface while the bulk phases remain approximately charge-neutral. We show that the salt concentration regulates the number of layers and the amplitude of the layer's charge density and electrostatic potential. Such charged layers can either repel or attract single-charged molecules diffusing across the interface. Our theory could be relevant for artificial systems and biomolecular condensates in cells. Our work suggests that interfaces of biomolecular condensates could mediate charge-specific transport similar to membrane-bound compartments.
△ Less
Submitted 11 October, 2023;
originally announced October 2023.
-
Formation of liquid shells in active droplet systems
Authors:
Jonathan Bauermann,
Giacomo Bartolucci,
Job Boekhoven,
Christoph A. Weber,
Frank Jülicher
Abstract:
We study a chemically active binary mixture undergoing phase separation and show that under non-equilibrium conditions, stable liquid spherical shells can form via a spinodal instability in the droplet center. A single liquid shell tends to grow until it undergoes a shape instability beyond a critical size. In an active emulsion, many stable and stationary liquid shells can coexist. We discuss con…
▽ More
We study a chemically active binary mixture undergoing phase separation and show that under non-equilibrium conditions, stable liquid spherical shells can form via a spinodal instability in the droplet center. A single liquid shell tends to grow until it undergoes a shape instability beyond a critical size. In an active emulsion, many stable and stationary liquid shells can coexist. We discuss conditions under which liquid shells are stable and dominant as compared to regimes where droplets undergo shape instabilities and divide.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
JulianA: An automatic treatment planning platform for intensity-modulated proton therapy and its application to intra- and extracerebral neoplasms
Authors:
Renato Bellotti,
Jonas Willmann,
Antony J. Lomax,
Andreas Adelmann,
Damien C. Weber,
Jan Hrbacek
Abstract:
Creating high quality treatment plans is crucial for a successful radiotherapy treatment. However, it demands substantial effort and special training for dosimetrists. Existing automated treatment planning systems typically require either an explicit prioritization of planning objectives, human-assigned objective weights, large amounts of historic plans to train an artificial intelligence or long…
▽ More
Creating high quality treatment plans is crucial for a successful radiotherapy treatment. However, it demands substantial effort and special training for dosimetrists. Existing automated treatment planning systems typically require either an explicit prioritization of planning objectives, human-assigned objective weights, large amounts of historic plans to train an artificial intelligence or long planning times. Many of the existing auto-planning tools are difficult to extend to new planning goals.
A new spot weight optimisation algorithm, called JulianA, was developed. The algorithm minimises a scalar loss function that is built only based on the prescribed dose to the tumour and organs at risk (OARs), but does not rely on historic plans. The objective weights in the loss function have default values that do not need to be changed for the patients in our dataset. The system is a versatile tool for researchers and clinicians without specialised programming skills. Extending it is as easy as adding an additional term to the loss function. JulianA was validated on a dataset of 19 patients with intra- and extracerebral neoplasms within the cranial region that had been treated at our institute. For each patient, a reference plan which was delivered to the cancer patient, was exported from our treatment database. Then JulianA created the auto plan using the same beam arrangement. The reference and auto plans were given to a blinded independent reviewer who assessed the acceptability of each plan, ranked the plans and assigned the human-/machine-made labels.
The auto plans were considered acceptable in 16 out of 19 patients and at least as good as the reference plan for 11 patients. Whether a plan was crafted by a dosimetrist or JulianA was only recognised for 9 cases. The median time for the spot weight optimisation is approx. 2 min (range: 0.5 min - 7 min).
△ Less
Submitted 15 December, 2023; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Non-equilibrium wet-dry cycling acts as a catalyst for chemical reactions
Authors:
Ivar Svalheim Haugerud,
Pranay Jaiswal,
Christoph A. Weber
Abstract:
Recent experimental studies suggest that wet-dry cycles and coexisting phases can each strongly alter chemical processes. The mechanisms of why and to which degree chemical processes are altered when subject to evaporation and condensation are unclear. To close this gap, we developed a theoretical framework for non-dilute chemical reactions subject to non-equilibrium conditions of evaporation and…
▽ More
Recent experimental studies suggest that wet-dry cycles and coexisting phases can each strongly alter chemical processes. The mechanisms of why and to which degree chemical processes are altered when subject to evaporation and condensation are unclear. To close this gap, we developed a theoretical framework for non-dilute chemical reactions subject to non-equilibrium conditions of evaporation and condensation. We find that such conditions can change the half-time of the product's yield by more than an order of magnitude, depending on the substrate-solvent interaction. We show that the cycle frequency strongly affects the chemical turnover when maintaining the system out of equilibrium by wet-dry cycles. There exists a resonance behavior in the cycle frequency where the turnover is maximal. This resonance behavior enables wet-dry cycles to select specific chemical reactions suggesting a potential mechanism for chemical evolution in prebiotic soups at early Earth.
△ Less
Submitted 15 December, 2023; v1 submitted 27 April, 2023;
originally announced April 2023.
-
Feasibility of the J-PET to monitor range of therapeutic proton beams
Authors:
Jakub Baran,
Damian Borys,
Karol Brzeziński,
Jan Gajewski,
Michał Silarski,
Neha Chug,
Aurélien Coussat,
Eryk Czerwiński,
Meysam Dadgar,
Kamil Dulski,
Kavya V. Eliyan,
Aleksander Gajos Krzysztof Kacprzak,
Łukasz Kapłon,
Konrad Klimaszewski,
Paweł Konieczka,
Renata Kopeć,
Grzegorz Korcyl,
Tomasz Kozik,
Wojciech Krzemień,
Deepak Kumar,
Antony J. Lomax,
Keegan McNamara,
Szymon Niedźwiecki,
Paweł Olko,
Dominik Panek
, et al. (18 additional authors not shown)
Abstract:
Objective: The aim of this work is to investigate the feasibility of the Jagiellonian Positron Emission Tomography (J-PET) scanner for intra-treatment proton beam range monitoring. Approach: The Monte Carlo simulation studies with GATE and PET image reconstruction with CASToR were performed in order to compare six J-PET scanner geometries (three dual-heads and three cylindrical). We simulated prot…
▽ More
Objective: The aim of this work is to investigate the feasibility of the Jagiellonian Positron Emission Tomography (J-PET) scanner for intra-treatment proton beam range monitoring. Approach: The Monte Carlo simulation studies with GATE and PET image reconstruction with CASToR were performed in order to compare six J-PET scanner geometries (three dual-heads and three cylindrical). We simulated proton irradiation of a PMMA phantom with a Single Pencil Beam (SPB) and Spread-Out Bragg Peak (SOBP) of various ranges. The sensitivity and precision of each scanner were calculated, and considering the setup's cost-effectiveness, we indicated potentially optimal geometries for the J-PET scanner prototype dedicated to the proton beam range assessment. Main results: The investigations indicate that the double-layer cylindrical and triple-layer double-head configurations are the most promising for clinical application. We found that the scanner sensitivity is of the order of 10$^{-5}$ coincidences per primary proton, while the precision of the range assessment for both SPB and SOBP irradiation plans was found below 1 mm. Among the scanners with the same number of detector modules, the best results are found for the triple-layer dual-head geometry. Significance: We performed simulation studies demonstrating that the feasibility of the J-PET detector for PET-based proton beam therapy range monitoring is possible with reasonable sensitivity and precision enabling its pre-clinical tests in the clinical proton therapy environment. Considering the sensitivity, precision and cost-effectiveness, the double-layer cylindrical and triple-layer dual-head J-PET geometry configurations seem promising for the future clinical application. Experimental tests are needed to confirm these findings.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Surface-Sensitive Raman Scattering by Transferable Nanoporous Plasmonic Membranes
Authors:
Roman M. Wyss,
Günter Kewes,
Martin Frimmer,
Karl-Philipp Schlichting,
Markus Parzefall,
Eric Bonvin,
Martin F. Sarott,
Morgan Trassin,
Lala Habibova,
Giorgia Marcelli,
Jan Vermant,
Lukas Novotny,
Mads C. Weber,
Sebastian Heeg
Abstract:
Raman spectroscopy is a powerful technique to characterize materials. It probes non-destructively chemical composition, crystallinity, defects, strain and coupling phenomena. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane (PAuM) on top of the surface of intere…
▽ More
Raman spectroscopy is a powerful technique to characterize materials. It probes non-destructively chemical composition, crystallinity, defects, strain and coupling phenomena. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane (PAuM) on top of the surface of interest. Slot-like nanopores in the membrane act as plasmonic slot antennas and enhance the Raman response of the surface or thin film underneath. Simultaneously, the PAuM suppresses the penetration of the excitation laser into the bulk, efficiently blocking the bulk Raman signal. Using graphene as a model surface, we show that these two simultaneous effects lead to an increase in the surface-to-bulk Raman signal ratio by three orders of magnitude. We find that 90% of the Raman enhancement occurs within the top 2.5 of the material, demonstrating truly surface-sensitive Raman scattering. To validate our approach, we analyze the surface of a LaNiO3 thin film. We observe a Raman mode splitting for the LaNiO3 surface-layer, which is spectroscopic evidence that the surface structure differs from the bulk. This result underpins that PAuM give direct access to Raman signatures of surfaces and their structural properties.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
A tabletop x-ray tomography instrument for nanometer-scale imaging: demonstration of the 1,000-element transition-edge sensor subarray
Authors:
Paul Szypryt,
Nathan Nakamura,
Daniel T. Becker,
Douglas A. Bennett,
Amber L. Dagel,
W. Bertrand Doriese,
Joseph W. Fowler,
Johnathon D. Gard,
J. Zachariah Harris,
Gene C. Hilton,
Jozsef Imrek,
Edward S. Jimenez,
Kurt W. Larson,
Zachary H. Levine,
John A. B. Mates,
D. McArthur,
Luis Miaja-Avila,
Kelsey M. Morgan,
Galen C. O'Neil,
Nathan J. Ortiz,
Christine G. Pappas,
Daniel R. Schmidt,
Kyle R. Thompson,
Joel N. Ullom,
Leila Vale
, et al. (6 additional authors not shown)
Abstract:
We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recent…
▽ More
We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recently used to reconstruct ICs at the 130 nm technology node, but to increase imaging speed to more practical levels, the detector efficiency needs to be improved. For this reason, we are building a spectrometer that will eventually contain 3,000 TES microcalorimeters read out with microwave superconducting quantum interference device (SQUID) multiplexing, and we currently have commissioned a 1,000 TES subarray. This still represents a significant improvement from the 240-pixel system and allows us to begin characterizing the full spectrometer performance. Of the 992 maximimum available readout channels, we have yielded 818 devices, representing the largest number of TES x-ray microcalorimeters simultaneously read out to date. These microcalorimeters have been optimized for pulse speed rather than purely energy resolution, and we measure a FWHM energy resolution of 14 eV at the 8.0 keV Cu K$α$ line.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Nanoscale Three-Dimensional Imaging of Integrated Circuits using a Scanning Electron Microscope and Transition-Edge Sensor Spectrometer
Authors:
Nathan Nakamura,
Paul Szypryt,
Amber L. Dagel,
Bradley K. Alpert,
Douglas A. Bennett,
W. Bertrand Doriese,
Malcolm Durkin,
Joseph W. Fowler,
Dylan T. Fox,
Johnathon D. Gard,
Ryan N. Goodner,
J. Zachariah Harris,
Gene C. Hilton,
Edward S. Jimenez,
Burke L. Kernen,
Kurt W. Larson,
Zachary H. Levine,
Daniel McArthur,
Kelsey M. Morgan,
Galen C. O'Neil,
Nathan J. Ortiz,
Christine G. Pappas,
Carl D. Reintsema,
Daniel R. Schmidt,
Peter A. Schultz
, et al. (8 additional authors not shown)
Abstract:
X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but is difficult to implement due to competing requirements on X-ray flux and spot size. Due to this constraint, state-of-the-art nanotomography is predominantly performed at large synchrotron facilities. We present a laboratory-scale nanotomography instrument that achieves nanoscale spatial res…
▽ More
X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but is difficult to implement due to competing requirements on X-ray flux and spot size. Due to this constraint, state-of-the-art nanotomography is predominantly performed at large synchrotron facilities. We present a laboratory-scale nanotomography instrument that achieves nanoscale spatial resolution while changing the limitations of conventional tomography tools. The instrument combines the electron beam of a scanning electron microscope (SEM) with the precise, broadband X-ray detection of a superconducting transition-edge sensor (TES) microcalorimeter. The electron beam generates a highly focused X-ray spot in a metal target held micrometers away from the sample of interest, while the TES spectrometer isolates target photons with high signal-to-noise. This combination of a focused X-ray spot, energy-resolved X-ray detection, and unique system geometry enable nanoscale, element-specific X-ray imaging in a compact footprint. The proof-of-concept for this approach to X-ray nanotomography is demonstrated by imaging 160 nm features in three dimensions in 6 layers of a Cu-SiO2 integrated circuit, and a path towards finer resolution and enhanced imaging capabilities is discussed.
△ Less
Submitted 4 March, 2024; v1 submitted 20 December, 2022;
originally announced December 2022.
-
Design of a 3000-pixel transition-edge sensor x-ray spectrometer for microcircuit tomography
Authors:
Paul Szypryt,
Douglas A. Bennett,
William J. Boone,
Amber L. Dagel,
Gabriella Dalton,
W. Bertrand Doriese,
Joseph W. Fowler,
Edward J. Garboczi,
Johnathon D. Gard,
Gene C. Hilton,
Jozsef Imrek,
Edward S. Jimenez,
Vincent Y. Kotsubo,
Kurt Larson,
Zachary H. Levine,
John A. B. Mates,
Daniel McArthur,
Kelsey M. Morgan,
Nathan Nakamura,
Galen C. O'Neil,
Nathan J. Ortiz,
Christine G. Pappas,
Carl D. Reintsema,
Daniel R. Schmidt,
Daniel S. Swetz
, et al. (6 additional authors not shown)
Abstract:
Feature sizes in integrated circuits have decreased substantially over time, and it has become increasingly difficult to three-dimensionally image these complex circuits after fabrication. This can be important for process development, defect analysis, and detection of unexpected structures in externally sourced chips, among other applications. Here, we report on a non-destructive, tabletop approa…
▽ More
Feature sizes in integrated circuits have decreased substantially over time, and it has become increasingly difficult to three-dimensionally image these complex circuits after fabrication. This can be important for process development, defect analysis, and detection of unexpected structures in externally sourced chips, among other applications. Here, we report on a non-destructive, tabletop approach that addresses this imaging problem through x-ray tomography, which we uniquely realize with an instrument that combines a scanning electron microscope (SEM) with a transition-edge sensor (TES) x-ray spectrometer. Our approach uses the highly focused SEM electron beam to generate a small x-ray generation region in a carefully designed target layer that is placed over the sample being tested. With the high collection efficiency and resolving power of a TES spectrometer, we can isolate x-rays generated in the target from background and trace their paths through regions of interest in the sample layers, providing information about the various materials along the x-ray paths through their attenuation functions. We have recently demonstrated our approach using a 240 Mo/Cu bilayer TES prototype instrument on a simplified test sample containing features with sizes of $\sim$1 $μ$m. Currently, we are designing and building a 3000 Mo/Au bilayer TES spectrometer upgrade, which is expected to improve the imaging speed by factor of up to 60 through a combination of increased detector number and detector speed.
△ Less
Submitted 14 December, 2022;
originally announced December 2022.
-
Selection of prebiotic oligonucleotides by cyclic phase separation
Authors:
Giacomo Bartolucci,
Adriana Calaça Serrão,
Philipp Schwintek,
Alexandra Kühnlein,
Yash Rana,
Philipp Janto,
Dorothea Hofer,
Christof B. Mast,
Dieter Braun,
Christoph A. Weber
Abstract:
The emergence of functional oligonucleotides on early Earth required a molecular selection mechanism to screen for specific sequences with prebiotic functions. Cyclic processes such as daily temperature oscillations were ubiquitous in this environment and could trigger oligonucleotide phase separation. Here, we propose sequence selection based on phase separation cycles realized through sedimentat…
▽ More
The emergence of functional oligonucleotides on early Earth required a molecular selection mechanism to screen for specific sequences with prebiotic functions. Cyclic processes such as daily temperature oscillations were ubiquitous in this environment and could trigger oligonucleotide phase separation. Here, we propose sequence selection based on phase separation cycles realized through sedimentation in a system subjected to the feeding of oligonucleotides. Using theory and experiments with DNA, we show sequence-specific enrichment in the sedimented dense phase, in particular of short 22-mer DNA sequences. The underlying mechanism selects for complementarity, as it enriches sequences that tightly interact in the condensed phase through base-pairing. Our mechanism also enables initially weakly biased pools to enhance their sequence bias or to replace the most abundant sequences as the cycles progress. Our findings provide an example of a selection mechanism that may have eased screening for the first auto-catalytic self-replicating oligonucleotides.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
Universal and dynamic ridge filter for pencil beam scanning particle therapy: novel concept for ultra-fast treatment delivery
Authors:
Vivek Maradia,
Isabella Colizzi,
David Meer,
Damien Charles Weber,
Antony John Lomax,
Oxana Actis,
Serena Psoroulas
Abstract:
Purpose In PBS particle therapy, short treatment delivery time is paramount for the efficient treatment of moving targets with motion mitigation techniques (such as breath-hold, rescanning, and gating). Energy and spot position change time are limiting factors in reducing treatment time. In this study, we designed a universal and dynamic energy modulator (ridge filter, RF) to broaden the Bragg pea…
▽ More
Purpose In PBS particle therapy, short treatment delivery time is paramount for the efficient treatment of moving targets with motion mitigation techniques (such as breath-hold, rescanning, and gating). Energy and spot position change time are limiting factors in reducing treatment time. In this study, we designed a universal and dynamic energy modulator (ridge filter, RF) to broaden the Bragg peak, to reduce the number of energies and spots required to cover the target volume, thus lowering the treatment time. Methods Our RF unit comprises two identical RFs placed just before the isocenter. Both RFs move relative to each other, changing the Bragg peaks characteristics dynamically. We simulated different Bragg peak shapes with the RF in TOPAS and validated them experimentally. We then delivered single-field plans with 1Gy/fraction to different geometrical targets in water, to measure the dose delivery time using the RF and compare it with the clinical settings. Results Aligning the RFs in different positions produces different broadening in the Bragg peak; we achieved a maximum broadening of 2 cm. With RF we reduced the number of energies in a field by more than 60%, and the dose delivery time by 50%, for all geometrical targets investigated, without compromising the dose distribution transverse and distal fall-off. Conclusions Our novel universal and dynamic RF allows for the adaptation of the Bragg peak broadening for a spot and/or energy layer based on the requirement of dose sha** in the target volume. It significantly reduces the number of energy layers and spots to cover the target volume, and thus the treatment time. This RF design is ideal for ultra-fast treatment delivery within a single breath-hold (5-10 sec), efficient delivery of motion mitigation techniques, and small animal irradiation with ultra-high dose rates (FLASH).
△ Less
Submitted 13 August, 2022;
originally announced August 2022.
-
Absolute Energy Measurements with Superconducting Transition-Edge Sensors for Muonic X-ray Spectroscopy at 44 keV
Authors:
Daikang Yan,
Joel C. Weber,
Tejas Guruswamy,
Kelsey M. Morgan,
Galen C. O'Neil,
Abigail L. Wessels,
Douglas A. Bennett,
Christine G. Pappas,
John A. Mates,
Johnathon D. Gard,
Daniel T. Becker,
Joseph W. Fowler,
Daniel S. Swetz,
Daniel R. Schmidt,
Joel N. Ullom,
Takuma Okumura,
Tadaaki Isobe,
Toshiyuki Azuma,
Shinji Okada,
Shinya Yamada,
Tadashi Hashimoto,
Orlando Quaranta,
Antonino Miceli,
Lisa M. Gades,
Umeshkumar M. Patel
, et al. (3 additional authors not shown)
Abstract:
Superconducting transition-edge sensor (TES) microcalorimeters have great utility in x-ray applications owing to their high energy resolution, good collecting efficiency and the feasibility of being multiplexed into large arrays. In this work, we develop hard x-ray TESs to measure the absolute energies of muonic-argon ($μ$-Ar) transition lines around 44 keV and 20 keV. TESs with sidecar absorbers…
▽ More
Superconducting transition-edge sensor (TES) microcalorimeters have great utility in x-ray applications owing to their high energy resolution, good collecting efficiency and the feasibility of being multiplexed into large arrays. In this work, we develop hard x-ray TESs to measure the absolute energies of muonic-argon ($μ$-Ar) transition lines around 44 keV and 20 keV. TESs with sidecar absorbers of different heat capacities were fabricated and characterized for their energy resolution and calibration uncertainty. We achieved ~ 1 eV absolute energy measurement accuracy at 44 keV, and < 12 eV energy resolution at 17.5 keV.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
A Theory for Colors of Strongly Correlated Electronic Systems
Authors:
Swagata Acharya,
Cedric Weber,
Dimitar Pashov,
Mark van Schilfgaarde,
Alexander I. Lichtenstein,
Mikhail I. Katsnelson
Abstract:
Many strongly correlated transition metal insulators are colored, even though they have large fundamental band gaps and no quasi-particle excitations in the visible range. Why such insulators possess the colors they do poses a serious challenge for any many-body theory to reliably pick up the interactions responsible for the color. We pick two archetypal cases as examples: NiO with green color and…
▽ More
Many strongly correlated transition metal insulators are colored, even though they have large fundamental band gaps and no quasi-particle excitations in the visible range. Why such insulators possess the colors they do poses a serious challenge for any many-body theory to reliably pick up the interactions responsible for the color. We pick two archetypal cases as examples: NiO with green color and MnF\textsubscript{2} with pink color. The body of literature around the collective charge transitions (excitons) that are responsible for the color in these and other strongly correlated systems, often fail to disentangle two important factors: what makes them form and what makes them optically bright. An adequate answer requires a theoretical approach able to compute such excitations in periodic crystals, reliably and without free parameters -- a formidable challenge. We employ two kinds of advanced \emph{ab initio} many body Green's function theories to investigate both optical and spin susceptibilities. The first, a perturbative theory based on low-order extensions of the $GW$ approximation, is able to explain the color in NiO, and indeed well describe the dielectric response over the entire frequency spectrum, while the same theory is unable to explain why MnF\textsubscript{2} is pink. We show its color originates from higher order spin-flip transitions that modify the optical response. This phenomenon is not captured by low-order perturbation theory, but it is contained in dynamical mean-field theory (DMFT), which has a dynamical spin-flip vertex that contributes to the charge susceptibility. We show that symmetry lowering mechanisms, such as spin-orbit coupling, odd-parity phonons and Jan-Teller distortions, determine how `bright' these excitons are, but are not fundamental to their existence.
△ Less
Submitted 6 March, 2023; v1 submitted 23 April, 2022;
originally announced April 2022.
-
Energy and Matter Supply for Active Droplets
Authors:
Jonathan Bauermann,
Christoph A. Weber,
Frank Jülicher
Abstract:
Chemically active droplets provide simple models for cell-like systems that can grow and divide. Such active droplet systems are driven away from thermodynamic equilibrium and turn over chemically, which corresponds to a simple metabolism. We consider two scenarios of non-equilibrium driving. First, droplets are driven via the system boundaries by external reservoirs that supply nutrient and remov…
▽ More
Chemically active droplets provide simple models for cell-like systems that can grow and divide. Such active droplet systems are driven away from thermodynamic equilibrium and turn over chemically, which corresponds to a simple metabolism. We consider two scenarios of non-equilibrium driving. First, droplets are driven via the system boundaries by external reservoirs that supply nutrient and remove waste (boundary-driven). Second, droplets are driven by a chemical energy provided by a fuel in the bulk (bulk-driven). For both scenarios, we discuss the conservation of energy and matter as well as the balance of entropy. We use conserved and non-conserved fields to analyze the non-equilibrium steady states of active droplets. Using an effective droplet model, we explore droplet stability and instabilities leading to droplet division. Our work reveals that droplet division occurs quite generally in active droplet systems. Our results suggest that life-like processes such as metabolism and division can emerge in simple non-equilibrium systems that combine the physics of phase separation and chemical reactions.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Heat Fluctuations in Chemically Active Systems
Authors:
Joël Mabillard,
Christoph A. Weber,
Frank Jülicher
Abstract:
Chemically active systems such as living cells are maintained out of thermal equilibrium due to chemical events which generate heat and lead to active fluctuations. A key question is to understand on which time and length scales active fluctuations dominate thermal fluctuations. Here, we formulate a stochastic field theory with Poisson white noise to describe the heat fluctuations which are genera…
▽ More
Chemically active systems such as living cells are maintained out of thermal equilibrium due to chemical events which generate heat and lead to active fluctuations. A key question is to understand on which time and length scales active fluctuations dominate thermal fluctuations. Here, we formulate a stochastic field theory with Poisson white noise to describe the heat fluctuations which are generated by stochastic chemical events and lead to active temperature fluctuations. We find that on large length and time scales, active fluctuations always dominate thermal fluctuations. However, at intermediate length and time scales, multiple crossovers exist which highlight the different characteristics of active and thermal fluctuations. Our work provides a framework to characterize fluctuations in active systems and reveals that local equilibrium holds at certain length and time scales.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Quantitative infrared near-field imaging of suspended topological insulator nanostructures
Authors:
C. Lupo,
J. Andzane,
D. Montemurro,
T. Bauch,
F. Lombardi,
C. Weber,
I. Rungger,
S. E. de Graaf
Abstract:
The development of nanoscale solid-state devices exploiting the promising topological surface states of topological insulator materials requires careful device engineering and improved materials quality. For instance, the introduction of a substrate, device contact or the formation of oxide layers can cause unintentional do** of the material, spoiling the sought-after properties. In support of t…
▽ More
The development of nanoscale solid-state devices exploiting the promising topological surface states of topological insulator materials requires careful device engineering and improved materials quality. For instance, the introduction of a substrate, device contact or the formation of oxide layers can cause unintentional do** of the material, spoiling the sought-after properties. In support of this, nanoscale imaging tools can provide useful materials information without the need for complex device fabrication. Here we study Bi$_2$Se$_3$ nanoribbons suspended across multiple material stacks of SiO$_2$ and Au using infrared scattering scanning near-field optical microscopy. We validate our observations against a multilayer finite dipole model to obtain quantitative imaging of the local Bi$_2$Se$_3$ properties that vary depending on the local environment. Moreover, we identify experimental signatures that we associate with quantum well states at the Bi$_2$Se$_3$ surfaces. Our approach opens a new direction for future engineering of nanoelectronic devices based on topological insulator materials.
△ Less
Submitted 19 December, 2021;
originally announced December 2021.
-
Chemical Kinetics and Mass Action in Coexisting Phases
Authors:
Jonathan Bauermann,
Sudarshana Laha,
Patrick M. McCall,
Frank Jülicher,
Christoph A. Weber
Abstract:
The kinetics of chemical reactions are determined by the law of mass action, which has been successfully applied to homogeneous, dilute mixtures. At non-dilute conditions, interactions among the components can give rise to coexisting phases, which can significantly alter the kinetics of chemical reactions. Here, we derive a theory for chemical reactions in coexisting phases at phase equilibrium. W…
▽ More
The kinetics of chemical reactions are determined by the law of mass action, which has been successfully applied to homogeneous, dilute mixtures. At non-dilute conditions, interactions among the components can give rise to coexisting phases, which can significantly alter the kinetics of chemical reactions. Here, we derive a theory for chemical reactions in coexisting phases at phase equilibrium. We show that phase equilibrium couples the rates of chemical reactions of components with their diffusive exchanges between the phases. Strikingly, the chemical relaxation kinetics can be represented as a flow along the phase equilibrium line in the phase diagram. A key finding of our theory is that differences in reaction rates between coexisting phases stem solely from phase-dependent reaction rate coefficients. Our theory is key to interpret how concentration levels of reactive components in condensed phases control chemical reaction rates in synthetic and biological systems.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Design of a High-Resolution Rayleigh-Taylor Experiment with the Crystal Backlighter Imager on the National Ignition Facility
Authors:
Adrianna M. Angulo,
Sabrina R. Nagel,
Channing M. Huntington,
Christopher Weber,
Harry F. Robey,
Gareth N. Hall,
Louisa Pickworth,
Carolyn C. Kuranz
Abstract:
The Rayleigh-Taylor (RT) instability affects a vast range of High Energy Density (HED) length scales, spanning from supernova explosions (10$^{13}$ m) to inertial confinement fusion (10$^{-6}$ m). In inertial confinement fusion, the RT instability is known to induce mixing or turbulent transition, which in turn cools the hot spot and hinders ignition. The fine-scale features of the RT instability,…
▽ More
The Rayleigh-Taylor (RT) instability affects a vast range of High Energy Density (HED) length scales, spanning from supernova explosions (10$^{13}$ m) to inertial confinement fusion (10$^{-6}$ m). In inertial confinement fusion, the RT instability is known to induce mixing or turbulent transition, which in turn cools the hot spot and hinders ignition. The fine-scale features of the RT instability, which are difficult to image in HED physics, may help determine if the system is mixing or is transitioning to turbulence. Earlier diagnostics lacked the spatial and temporal resolution necessary to diagnose the dynamics that occur along the RT structure. A recently developed diagnostic, the Crystal Backlighter Imager (CBI), \cite{Hall:2019, DoZonePlate} can now produce an x-ray radiograph capable of resolving the fine-scale features expected in these RT unstable systems. This paper describes an experimental design that adapts a well-characterized National Ignition Facility (NIF) platform to accommodate the CBI diagnostic. Simulations and synthetic radiographs highlight the resolution capabilities of the CBI in comparison to previous diagnostics. The improved resolution of the system can provide new observations to study the RT instability's involvement in mixing and the transition to turbulence in the HED regime.
△ Less
Submitted 30 November, 2021;
originally announced December 2021.
-
Experiments conducted in the burning plasma regime with inertial fusion implosions
Authors:
J. S. Ross,
J. E. Ralph,
A. B. Zylstra,
A. L. Kritcher,
H. F. Robey,
C. V. Young,
O. A. Hurricane,
D. A. Callahan,
K. L. Baker,
D. T. Casey,
T. Doeppner,
L. Divol,
M. Hohenberger,
S. Le Pape,
A. Pak,
P. K. Patel,
R. Tommasini,
S. J. Ali,
P. A. Amendt,
L. J. Atherton,
B. Bachmann,
D. Bailey,
L. R. Benedetti,
L. Berzak Hopkins,
R. Betti
, et al. (127 additional authors not shown)
Abstract:
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into…
▽ More
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Efficient broadband THz generation in BNA organic crystal at Ytterbium laser wavelength
Authors:
Hovan Lee,
Claudia Gollner,
Jiaqi Nie,
Yan Zhang,
Cedric Weber,
Mostafa Shalaby
Abstract:
In this work, we demonstrate BNAs high potential for efficient generation of high power THz using ytterbium laser wavelengths. We study the generation theoretically and experimentally using laser wavelength of 960-1150 nm. Broadband pulses of 0-7 THz and high efficiency of 0.6% are demonstrated.
In this work, we demonstrate BNAs high potential for efficient generation of high power THz using ytterbium laser wavelengths. We study the generation theoretically and experimentally using laser wavelength of 960-1150 nm. Broadband pulses of 0-7 THz and high efficiency of 0.6% are demonstrated.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Gaussian mixture model clustering algorithms for the analysis of high-precision mass measurements
Authors:
Colin M. Weber,
Dwaipayan Ray,
Adrian A. Valverde,
Jason A. Clark,
Kumar S. Sharma
Abstract:
The development of the phase-imaging ion-cyclotron resonance (PI-ICR) technique for use in Penning trap mass spectrometry (PTMS) increased the speed and precision with which PTMS experiments can be carried out. In PI-ICR, data sets of the locations of individual ion hits on a detector are created showing how ions cluster together into spots according to their cyclotron frequency. Ideal data sets w…
▽ More
The development of the phase-imaging ion-cyclotron resonance (PI-ICR) technique for use in Penning trap mass spectrometry (PTMS) increased the speed and precision with which PTMS experiments can be carried out. In PI-ICR, data sets of the locations of individual ion hits on a detector are created showing how ions cluster together into spots according to their cyclotron frequency. Ideal data sets would consist of a single, 2D-spherical spot with no other noise, but in practice data sets typically contain multiple spots, non-spherical spots, or significant noise, all of which can make determining the locations of spot centers non-trivial. A method for assigning groups of ions to their respective spots and determining the spot centers is therefore essential for further improving precision and confidence in PI-ICR experiments. We present the class of Gaussian mixture model (GMM) clustering algorithms as an optimal solution. We show that on simulated PI-ICR data, several types of GMM clustering algorithms perform better than other clustering algorithms over a variety of typical scenarios encountered in PI-ICR. The mass spectra of $^{163}\text{Gd}$, $^{163m}\text{Gd}$, $^{162}\text{Tb}$, and $^{162m}\text{Tb}$ measured using PI-ICR at the Canadian Penning trap mass spectrometer were checked using GMMs, producing results that were in close agreement with the previously published values.
△ Less
Submitted 11 December, 2021; v1 submitted 18 August, 2021;
originally announced August 2021.
-
Data-Driven Dynamical Mean-Field Theory: an error-correction approach to solve the quantum many-body problem using machine learning
Authors:
Evan Sheridan,
Christopher Rhodes,
Francois Jamet,
Ivan Rungger,
Cedric Weber
Abstract:
Machine learning opens new avenues for modelling correlated materials. Quantum embedding approaches, such as the dynamical mean-field theory (DMFT), provide corrections to first-principles calculations for strongly correlated materials, which are poorly described at lower levels of theory. Such embedding approaches are computationally demanding on classical computing architectures, and hence remai…
▽ More
Machine learning opens new avenues for modelling correlated materials. Quantum embedding approaches, such as the dynamical mean-field theory (DMFT), provide corrections to first-principles calculations for strongly correlated materials, which are poorly described at lower levels of theory. Such embedding approaches are computationally demanding on classical computing architectures, and hence remain restricted to small systems, which limits the scope of applicability without exceptional computational resources. Here we outline a data-driven machine learning process for solving the Anderson Impurity Model (AIM) - the central component of DMFT calculations. The key advance is the use of an ensemble error-correction approach to generate fast and accurate solutions of AIM. An example calculation of the Mott transition using DMFT in the single band Hubbard model is given as an example of the technique, and is validated against the most accurate available method. This new approach is called data-driven dynamical mean-field theory (\textbf{d$^{3}$MFT}).
△ Less
Submitted 30 November, 2021; v1 submitted 29 July, 2021;
originally announced July 2021.
-
The Lunar Geophysical Network Landing Sites Science Rationale
Authors:
Heidi Fuqua Haviland,
Renee C. Weber,
Clive R. Neal,
Philippe Lognonné,
Raphaël F. Garcia,
Nicholas Schmerr,
Seiichi Nagihara,
Robert Grimm,
Douglas G. Currie,
Simone Dell'Agnello,
Thomas R. Watters,
Mark P. Panning,
Catherine L. Johnson,
Ryuhei Yamada,
Martin Knapmeyer,
Lillian R. Ostrach,
Taichi Kawamura,
Noah Petro,
Paul M. Bremner
Abstract:
The Lunar Geophysical Network (LGN) mission is proposed to land on the Moon in 2030 and deploy packages at four locations to enable geophysical measurements for 6-10 years. Returning to the lunar surface with a long-lived geophysical network is a key next step to advance lunar and planetary science. LGN will greatly expand our primarily Apollo-based knowledge of the deep lunar interior by identify…
▽ More
The Lunar Geophysical Network (LGN) mission is proposed to land on the Moon in 2030 and deploy packages at four locations to enable geophysical measurements for 6-10 years. Returning to the lunar surface with a long-lived geophysical network is a key next step to advance lunar and planetary science. LGN will greatly expand our primarily Apollo-based knowledge of the deep lunar interior by identifying and characterizing mantle melt layers, as well as core size and state. To meet the mission objectives, the instrument suite provides complementary seismic, geodetic, heat flow, and electromagnetic observations. We discuss the network landing site requirements and provide example sites that meet these requirements. Landing site selection will continue to be optimized throughout the formulation of this mission. Possible sites include the P-5 region within the Procellarum KREEP Terrane (PKT; (lat:$15^{\circ}$; long:$-35^{\circ}$), Schickard Basin (lat:$-44.3^{\circ}$; long:$-55.1^{\circ}$), Crisium Basin (lat:$18.5^{\circ}$; long:$61.8^{\circ}$), and the farside Korolev Basin (lat:$-2.4^{\circ}$; long:$-159.3^{\circ}$). Network optimization considers the best locations to observe seismic core phases, e.g., ScS and PKP. Ray path density and proximity to young fault scarps are also analyzed to provide increased opportunities for seismic observations. Geodetic constraints require the network to have at least three nearside stations at maximum limb distances. Heat flow and electromagnetic measurements should be obtained away from terrane boundaries and from magnetic anomalies at locations representative of global trends. An in-depth case study is provided for Crisium. In addition, we discuss the consequences for scientific return of less than optimal locations or number of stations.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Sensing applied pressure by triggering electronic quantum many-body excitations in an optical waveguide
Authors:
Federica De Chiara,
Hovan Lee,
Cedric Weber,
Hongbin Liu
Abstract:
Recently, nanomaterials are arousing increasing interest and a wide variety of opto-electronic devices have been developed, such as light-emitting diodes, solar cells, and photodetectors. However, the study of the light emission properties of quantum dots under pressure is still limited. By using a joint theoretical and experimental approach, we developed a polymer waveguide doped with CdSe quantu…
▽ More
Recently, nanomaterials are arousing increasing interest and a wide variety of opto-electronic devices have been developed, such as light-emitting diodes, solar cells, and photodetectors. However, the study of the light emission properties of quantum dots under pressure is still limited. By using a joint theoretical and experimental approach, we developed a polymer waveguide doped with CdSe quantum dots for pressure sensing. Absorption and re-emission effects of the quantum dots are affected by the pressure applied on the waveguide. Specifically, since both amplitude and wavelength are modulated, not only the pressure can be detected, but also its location along the waveguide. The calibration results demonstrate the feasibility of the proposed force sensor design. Theoretical model and simulations further validate the presented sensing principle. The proposed prototype benefits from the main advantages of optical sensors, such as their predisposition to miniaturization, small cable sizes and weights, immunity to electromagnetic interference, and safe operation in hazard environments. In addition, bio-compatibility, non-toxicity and flexibility make the presented sensor potentially appealing to various application fields such as nanobiotechnology and robotic sensing.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Thermodynamics of Wetting, Prewetting and Surface Phase Transitions with Surface Binding
Authors:
Xue** Zhao,
Giacomo Bartolucci,
Alf Honigmann,
Frank Jülicher,
Christoph A. Weber
Abstract:
In living cells, protein-rich condensates can wet the cell membrane and surfaces of membrane-bound organelles. Interestingly, many phase-separating proteins also bind to membranes leading to a molecular layer of bound molecules. Here we investigate how binding to membranes affects wetting, prewetting and surface phase transitions. We derive a thermodynamic theory for a three-dimensional bulk in th…
▽ More
In living cells, protein-rich condensates can wet the cell membrane and surfaces of membrane-bound organelles. Interestingly, many phase-separating proteins also bind to membranes leading to a molecular layer of bound molecules. Here we investigate how binding to membranes affects wetting, prewetting and surface phase transitions. We derive a thermodynamic theory for a three-dimensional bulk in the presence of a two-dimensional, flat membrane. At phase coexistence, we find that membrane binding facilitates complete wetting and thus lowers the wetting angle. Moreover, below the saturation concentration, binding facilitates the formation of a thick layer at the membrane and thereby shifts the prewetting phase transition far below the saturation concentration. The distinction between bound and unbound molecules near the surface leads to a large variety of surface states {and complex surface phase diagrams with a rich topology of phase transitions. Our work suggests that surface phase transitions combined with molecular binding represent a versatile mechanism to control the formation of protein-rich domains at intra-cellular surfaces.
△ Less
Submitted 20 March, 2022; v1 submitted 23 June, 2021;
originally announced June 2021.
-
From Slater to Mott physics: epitaxial engineering of electronic correlations in oxide interfaces
Authors:
Carla Lupo,
Evan Sheridan,
Edoardo Fertitta,
David Dubbink,
Chris J. Pickard,
Cedric Weber
Abstract:
Using spin-assisted ab-initio random structure searches, we explore an exhaustive quantum phase diagram of archetypal interfaced Mott insulators, i.e. lanthanum-iron and lanthanum-titanium oxides. In particular, we report that the charge transfer induced by the interfacial electronic reconstruction stabilises a high spin ferrous Fe2+ state. We provide a pathway to control the strength of correlati…
▽ More
Using spin-assisted ab-initio random structure searches, we explore an exhaustive quantum phase diagram of archetypal interfaced Mott insulators, i.e. lanthanum-iron and lanthanum-titanium oxides. In particular, we report that the charge transfer induced by the interfacial electronic reconstruction stabilises a high spin ferrous Fe2+ state. We provide a pathway to control the strength of correlation in this electronic state by tuning the epitaxial strain, yielding a manifold of quantum electronic phases, i.e. Mott-Hubbard, charge transfer and Slater insulating states. Furthermore we report that the electronic correlations are closely related to the structural oxygen octahedral rotations, whose control is able to stabilise the low spin state of Fe2+ at low pressure previously observed only under the extreme high pressure conditions in the Earth's lower mantle. Thus we provide avenues for magnetic switching via THz radiations which have crucial implications for next generation of spintronics technologies.
△ Less
Submitted 28 April, 2021;
originally announced April 2021.
-
Controlling composition of coexisting phases via molecular transitions
Authors:
G. Bartolucci,
O. Adame-Arana,
X. Zhao,
C. A. Weber
Abstract:
Phase separation and transitions among different molecular states are ubiquitous in living cells. Such transitions can be governed by local equilibrium thermodynamics or by active processes controlled by biological fuel. It remains largely unexplored how the behavior of phase-separating systems with molecular transitions differs between thermodynamic equilibrium and cases where detailed balance of…
▽ More
Phase separation and transitions among different molecular states are ubiquitous in living cells. Such transitions can be governed by local equilibrium thermodynamics or by active processes controlled by biological fuel. It remains largely unexplored how the behavior of phase-separating systems with molecular transitions differs between thermodynamic equilibrium and cases where detailed balance of the molecular transition rates is broken due to the presence of fuel. Here, we present a model of a phase-separating ternary mixture where two components can convert into each other. At thermodynamic equilibrium, we find that molecular transitions can give rise to a lower dissolution temperature and thus reentrant phase behavior. Moreover, we find a discontinuous thermodynamic phase transition in the composition of the droplet phase if both converting molecules attract themselves with similar interaction strength. Breaking detailed-balance of the molecular transition leads to quasi-discontinuous changes in droplet composition by varying the fuel amount for a larger range of inter-molecular interactions. Our findings showcase that phase separation with molecular transitions provides a versatile mechanism to control properties of intra-cellular and synthetic condensates via discontinuous switches in droplet composition.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Commissioning of a clinical pencil beam scanning proton therapy unit for ultrahigh dose rates (FLASH)
Authors:
K. P. Nesteruk,
M. Togno,
M. Grossmann,
A. J. Lomax,
D. C. Weber,
J. M. Schippers,
S. Safai,
D. Meer,
S. Psoroulas
Abstract:
Purpose: The purpose of this work was to provide a flexible platform for FLASH research with protons by adapting a former clinical pencil beam scanning gantry to irradiations with ultrahigh dose rates.
Methods: PSI Gantry 1 treated patients until December 2018. We optimized the beamline parameters to transport the 250 MeV beam extracted from the PSI COMET accelerator to the treatment room, maxim…
▽ More
Purpose: The purpose of this work was to provide a flexible platform for FLASH research with protons by adapting a former clinical pencil beam scanning gantry to irradiations with ultrahigh dose rates.
Methods: PSI Gantry 1 treated patients until December 2018. We optimized the beamline parameters to transport the 250 MeV beam extracted from the PSI COMET accelerator to the treatment room, maximizing the transmission of beam intensity to the sample. We characterized a dose monitor on the gantry to ensure good control of the dose, delivered in spot-scanning mode. We characterized the beam for different dose rates and field sizes for transmission irradiations. We explored scanning possibilities in order to enable conformal irradiations or transmission irradiations of large targets (with transverse scanning). Results: We achieved a transmission of 86 % from the cyclotron to the treatment room. We reached a peak dose rate of 9000 Gy/s at 3 mm water equivalent depth, along the central axis of a single pencil beam. Field sizes of up to 5x5 mm$^{2}$ were achieved for single spot FLASH irradiations. Fast transverse scanning allowed to cover a field of 16x1.2 cm$^{2}$. With the use of a nozzle-mounted range shifter we are able to span depths in water ranging from 19.6 to 37.9 cm. Various dose levels were delivered with a precision within less than 1 %. Conclusions: We have realized a proton FLASH irradiation setup able to investigate continuously a wide dose rate spectrum, from 1 to 9000 Gy/s in a single spot irradiation as well as in the pencil beam scanning mode. As such, we have developed a versatile test bench for FLASH research.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Receiver development for BICEP Array, a next-generation CMB polarimeter at the South Pole
Authors:
L. Moncelsi,
P. A. R. Ade,
Z. Ahmed,
M. Amiri,
D. Barkats,
R. Basu Thakur,
C. A. Bischoff,
J. J. Bock,
V. Buza,
J. Cheshire,
J. Connors,
J. Cornelison,
M. Crumrine,
A. Cukierman,
E. V. Denison,
M. Dierickx,
L. Duband,
M. Eiben,
S. Fatigoni,
J. P. Filippini,
N. Goeckner-Wald,
D. C. Goldfinger,
J. Grayson,
P. Grimes,
G. Hall
, et al. (50 additional authors not shown)
Abstract:
A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date…
▽ More
A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date. BICEP Array (BA) is the Stage-3 instrument of the BK program and will comprise four BICEP3-class receivers observing at 30/40, 95, 150 and 220/270 GHz with a combined 32,000+ detectors; such wide frequency coverage is necessary for control of the Galactic foregrounds, which also produce degree-scale $B$-mode signal. The 30/40 GHz receiver is designed to constrain the synchrotron foreground and has begun observing at the South Pole in early 2020. By the end of a 3-year observing campaign, the full BICEP Array instrument is projected to reach $σ_r$ between 0.002 and 0.004, depending on foreground complexity and degree of removal of $B$-modes due to gravitational lensing (delensing). This paper presents an overview of the design, measured on-sky performance and calibration of the first BA receiver. We also give a preview of the added complexity in the time-domain multiplexed readout of the 7,776-detector 150 GHz receiver.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Map** the Future of Particle Radiobiology in Europe: The INSPIRE Project
Authors:
N. T. Henthorn,
O. Sokol,
M. Durante,
L. De Marzi,
F. Pouzoulet,
J. Miszczyk,
P. Olko,
S. Brandenburg,
M-J. van Goethem,
L. Barazzuol,
M. Tambas,
J. A. Langendijk,
M. Davidkova,
V. Vondravcek,
E. Bodenstein,
J. Pawelke,
A. Lomax,
D. C. Weber,
A. Dasu,
B. Stenerlow,
P. R. Poulsen,
B. S. Sorensen,
C. Grau,
M. K. Sitarz,
A-C Heuskin
, et al. (5 additional authors not shown)
Abstract:
Particle therapy is a growing cancer treatment modality worldwide. However, there still remains a number of unanswered questions considering differences in the biological response between particles and photons. These questions, and probing of biological mechanisms in general, necessitate experimental investigation. The Infrastructure in Proton International Research (INSPIRE) project was created t…
▽ More
Particle therapy is a growing cancer treatment modality worldwide. However, there still remains a number of unanswered questions considering differences in the biological response between particles and photons. These questions, and probing of biological mechanisms in general, necessitate experimental investigation. The Infrastructure in Proton International Research (INSPIRE) project was created to provide an infrastructure for European research, unify research efforts on the topic of proton and ion therapy across Europe, and to facilitate the sharing of information and resources. This work highlights the radiobiological capabilities of the INSPIRE partners, providing details of physics (available particle types and energies), biology (sample preparation and post-irradiation analysis), and researcher access (the process of applying for beam time). The collection of information reported here is designed to provide researchers both in Europe and worldwide with the tools required to select the optimal center for their research needs. We also highlight areas of redundancy in capabilities and suggest areas for future investment.
△ Less
Submitted 7 July, 2020;
originally announced July 2020.
-
Flow-driven branching in a frangible porous medium
Authors:
Nicholas J. Derr,
David C. Fronk,
Christoph A. Weber,
Amala Mahadevan,
Chris H. Rycroft,
L. Mahadevan
Abstract:
Channel formation and branching is widely seen in physical systems where movement of fluid through a porous structure causes the spatiotemporal evolution of the medium in response to the flow, in turn causing flow pathways to evolve. We provide a simple theoretical framework that embodies this feedback mechanism in a multi-phase model for flow through a fragile porous medium with a dynamic permeab…
▽ More
Channel formation and branching is widely seen in physical systems where movement of fluid through a porous structure causes the spatiotemporal evolution of the medium in response to the flow, in turn causing flow pathways to evolve. We provide a simple theoretical framework that embodies this feedback mechanism in a multi-phase model for flow through a fragile porous medium with a dynamic permeability. Numerical simulations of the model show the emergence of branched networks whose topology is determined by the geometry of external flow forcing. This allows us to delineate the conditions under which splitting and/or coalescing branched network formation is favored, with potential implications for both understanding and controlling branching in soft frangible media.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Particle response of antenna-coupled TES arrays: results from SPIDER and the lab
Authors:
B. Osherson,
J. P. Filippini,
J. Fu,
R. V. Gramillano,
R. Gualtieri,
E. C. Shaw,
P. A. R. Ade,
M. Amiri,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
O. Dore,
A. A. Fraisse,
A. E. Gambrel,
N. N. Gandilo,
J. E. Gudmundsson,
M. Halpern,
J. Hartley,
M. Hasselfield,
G. Hilton,
W. Holmes,
V. V. Hristov
, et al. (23 additional authors not shown)
Abstract:
Future mm-wave and sub-mm space missions will employ large arrays of multiplexed Transition Edge Sensor (TES) bolometers. Such instruments must contend with the high flux of cosmic rays beyond our atmosphere that induce "glitches" in bolometer data, which posed a challenge to data analysis from the Planck bolometers. Future instruments will face the additional challenges of shared substrate wafers…
▽ More
Future mm-wave and sub-mm space missions will employ large arrays of multiplexed Transition Edge Sensor (TES) bolometers. Such instruments must contend with the high flux of cosmic rays beyond our atmosphere that induce "glitches" in bolometer data, which posed a challenge to data analysis from the Planck bolometers. Future instruments will face the additional challenges of shared substrate wafers and multiplexed readout wiring. In this work we explore the susceptibility of modern TES arrays to the cosmic ray environment of space using two data sets: the 2015 long-duration balloon flight of the SPIDER cosmic microwave background polarimeter, and a laboratory exposure of SPIDER flight hardware to radioactive sources. We find manageable glitch rates and short glitch durations, leading to minimal effect on SPIDER analysis. We constrain energy propagation within the substrate through a study of multi-detector coincidences, and give a preliminary look at pulse shapes in laboratory data.
△ Less
Submitted 13 February, 2020;
originally announced February 2020.
-
Characterizing the Sensitivity of 40 GHz TES Bolometers for BICEP Array
Authors:
C. Zhang,
P. A. R. Ade,
Z. Ahmed,
M. Amiri,
D. Barkats,
R. Basu Thakur,
C. A. Bischoff,
J. J. Bock,
H. Boenish,
E. Bullock,
V. Buza,
J. Cheshire,
J. Connors,
J. Cornelison,
M. Crumrine,
A. Cukierman,
M. Dierickx,
L. Duband,
S. Fatigoni,
J. P. Filippini,
G. Hall,
M. Halpern,
S. Harrison,
S. Henderson,
S. R. Hildebrandt
, et al. (44 additional authors not shown)
Abstract:
The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of grav…
▽ More
The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of gravitational lensing polarization. The 30/40 GHz receiver of the BICEP Array (BA) will deploy at the end of 2019 and will constrain the synchrotron foreground with unprecedented accuracy within the BK sky patch. We will show the design of the 30/40 GHz detectors and test results summarizing its performance. The low optical and atmospheric loading at these frequencies requires our TES detectors to have low saturation power in order to be photon-noise dominated. To realize the low thermal conductivity required from a 250 mK base temperature, we developed new bolometer leg designs. We will present the relevant measured detector parameters: G, Tc, Rn, Psat , and spectral bands, and noise spectra. We achieved a per bolometer NEP including all noise components of 2.07E-17 W/sqrt(Hz), including an anticipated photon noise level 1.54E-17 W/sqrt(Hz).
△ Less
Submitted 12 February, 2020;
originally announced February 2020.
-
ONETEP + TOSCAM: uniting dynamical mean field theory and linear-scaling density functional theory
Authors:
Edward B. Linscott,
Daniel J. Cole,
Nicholas D. M. Hine,
Michael C. Payne,
Cédric Weber
Abstract:
We introduce the unification of dynamical mean field theory (DMFT) and linear-scaling density functional theory (DFT), as recently implemented in ONETEP, a linear-scaling DFT package, and TOSCAM, a DMFT toolbox. This code can account for strongly correlated electronic behavior while simultaneously including the effects of the environment, making it ideally suited for studying complex and heterogen…
▽ More
We introduce the unification of dynamical mean field theory (DMFT) and linear-scaling density functional theory (DFT), as recently implemented in ONETEP, a linear-scaling DFT package, and TOSCAM, a DMFT toolbox. This code can account for strongly correlated electronic behavior while simultaneously including the effects of the environment, making it ideally suited for studying complex and heterogeneous systems containing transition metals and lanthanides, such as metalloproteins. We systematically introduce the necessary formalism, which must account for the non-orthogonal basis set used by ONETEP. In order to demonstrate the capabilities of this code, we apply it to carbon monoxide-ligated iron porphyrin and explore the distinctly quantum-mechanical character of the iron $3d$ electrons during the process of photodissociation.
△ Less
Submitted 1 May, 2020; v1 submitted 18 November, 2019;
originally announced November 2019.
-
Liquid phase separation controlled by pH
Authors:
Omar Adame-Arana,
Christoph A. Weber,
Vasily Zaburdaev,
Jacques Prost,
Frank Jülicher
Abstract:
We present a minimal model to study liquid phase separation in a fixed pH ensemble. The model describes a mixture composed of macromolecules that exist in three different charge states and have a tendency to phase separate. We introduce the pH dependence of phase separation by means of a set of reactions describing the protonation and deprotonation of macromolecules, as well as the self-ionisation…
▽ More
We present a minimal model to study liquid phase separation in a fixed pH ensemble. The model describes a mixture composed of macromolecules that exist in three different charge states and have a tendency to phase separate. We introduce the pH dependence of phase separation by means of a set of reactions describing the protonation and deprotonation of macromolecules, as well as the self-ionisation of water. We use conservation laws to identify the conjugate thermodynamic variables at chemical equilibrium. Using this thermodynamic conjugate variables we perform a Legendre transform which defines the corresponding free energy at fixed pH. We first study the possible phase diagram topologies at the isoelectric point of the macromolecules. We then show how the phase behavior depends on pH by moving away from the isoelectric point. We find that phase diagrams as a function of pH strongly depend on whether oppositely charged macromolecules or neutral macromolecules have a stronger tendency to phase separate. We predict the existence of reentrant behavior as a function of pH. In addition, our model also predicts that the region of phase separation is typically broader at the isoelectric point. This model could account for both, the protein separation observed in yeast cells for pH values close to the isoelectric point of many cytosolic proteins and also for the in vitro experiments of single proteins exhibiting phase separation as a function of pH.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
How bacterial cells and colonies move on solid substrates
Authors:
Wolfram Pönisch,
Christoph A. Weber,
Vasily Zaburdaev
Abstract:
Many bacteria rely on active cell appendages, such as type IV pili, to move over substrates and interact with neighboring cells. Here, we study the motion of individual cells and bacterial colonies, mediated by the collective interactions of multiple pili. It was shown experimentally that the substrate motility of Neisseria gonorrhoeae cells can be described as a persistent random walk with a pers…
▽ More
Many bacteria rely on active cell appendages, such as type IV pili, to move over substrates and interact with neighboring cells. Here, we study the motion of individual cells and bacterial colonies, mediated by the collective interactions of multiple pili. It was shown experimentally that the substrate motility of Neisseria gonorrhoeae cells can be described as a persistent random walk with a persistence length that exceeds the mean pili length. Moreover, the persistence length increases for a higher number of pili per cell. With the help of a simple, tractable stochastic model, we test whether a tug-of-war without directional memory can explain the persistent motion of single Neisseria gonorrhoeae cells. While the persistent motion of single cells indeed emerges naturally in the model, a tug-of-war alone is not capable of explaining the motility of microcolonies, which becomes weaker with increasing colony size. We suggest sliding friction between the microcolonies and the substrate as the missing ingredient. While such friction almost does not affect the general mechanism of single cell motility, it has a strong effect on colony motility. We validate the theoretical predictions by using a three-dimensional computational model that includes explicit details of the pili dynamics, force generation and geometry of cells.
△ Less
Submitted 30 April, 2019; v1 submitted 7 October, 2018;
originally announced October 2018.
-
Spatial control of irreversible protein aggregation
Authors:
Christoph A. Weber,
Thomas C. T. Michaels,
L. Mahadevan
Abstract:
Liquid cellular compartments spatially segregate from the cytoplasm and can regulate aberrant protein aggregation, a process linked to several medical conditions, including Alzheimer's and Parkinson's diseases. Yet the mechanisms by which these droplet-like compartments affect protein aggregation remain unknown. Here, we combine kinetic theory of protein aggregation and liquid-liquid phase separat…
▽ More
Liquid cellular compartments spatially segregate from the cytoplasm and can regulate aberrant protein aggregation, a process linked to several medical conditions, including Alzheimer's and Parkinson's diseases. Yet the mechanisms by which these droplet-like compartments affect protein aggregation remain unknown. Here, we combine kinetic theory of protein aggregation and liquid-liquid phase separation to study the spatial control of irreversible protein aggregation in the presence of liquid compartments. We find that, even for weak interactions between the compartment constituents and the aggregating monomers, aggregates are strongly enriched inside the liquid compartment relative to the surrounding cytoplasm. We show that this enrichment is caused by a positive feedback mechanism of aggregate nucleation and growth which is mediated by a flux maintaining the phase equilibrium between the compartment and the cytoplasm. Our model predicts that the compartment volume that maximizes aggregate enrichment in the compartment is determined by the reaction orders of aggregate nucleation. The underlying mechanism of aggregate enrichment could be used to confine cytotoxic protein aggregates inside droplet-like compartments suggesting potential new avenues against aberrant protein aggregation. Our findings could also represent a common mechanism for the spatial control of irreversible chemical reactions in general.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter
Authors:
A. S. Bergman,
P. A. R. Ade,
S. Akers,
M. Amiri,
J. A. Austermann,
J. A. Beall,
D. T. Becker,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
R. S Domagalski,
O. Doré,
S. M. Duff,
A. J. Duivenvoorden,
H. K. Eriksen,
M. Farhang,
J. P. Filippini,
L. M. Fissel,
A. A. Fraisse,
K. Freese,
M. Galloway,
A. E. Gambrel
, et al. (54 additional authors not shown)
Abstract:
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mod…
▽ More
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018.
△ Less
Submitted 22 November, 2017; v1 submitted 11 November, 2017;
originally announced November 2017.
-
Differential-activity driven instabilities in biphasic active matter
Authors:
Christoph Weber,
Chris H. Rycroft,
L. Mahadevan
Abstract:
Active stresses can cause instabilities in contractile gels and living tissues. Here we describe a generic hydrodynamic theory that treats these systems as a mixture of two phases of varying activity and different mechanical properties. We find that differential activity between the phases provides a mechanism causing a demixing instability. We follow the nonlinear evolution of the instability and…
▽ More
Active stresses can cause instabilities in contractile gels and living tissues. Here we describe a generic hydrodynamic theory that treats these systems as a mixture of two phases of varying activity and different mechanical properties. We find that differential activity between the phases provides a mechanism causing a demixing instability. We follow the nonlinear evolution of the instability and characterize a phase diagram of the resulting patterns. Our study complements other instability mechanisms in mixtures such as differential growth, shape, motion or adhesion.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.