-
Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D
Authors:
D. R. Ernst,
A. Bortolon,
C. S. Chang,
S. Ku,
F. Scotti,
H. Q. Wang,
Z. Yan,
Jie Chen,
C. Chrystal,
F. Glass,
S. Haskey,
R. Hood,
F. Khabanov,
F. Laggner,
C. Lasnier,
G. R. McKee,
T. L. Rhodes,
D. Truong,
J. Watkins
Abstract:
Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with…
▽ More
Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.
△ Less
Submitted 1 June, 2024; v1 submitted 29 February, 2024;
originally announced March 2024.
-
Visible metalenses with high focusing efficiency fabricated using nanoimprint lithography
Authors:
Andrew McClung,
Mahsa Torfeh,
Vincent J. Einck,
James J. Watkins,
Amir Arbabi
Abstract:
Metasurfaces enable precise control over the properties of light and hold promise for commercial applications. However, fabricating visible metasurfaces suitable for high-volume production is challenging and requires scalable processes. Nanoimprint lithography is a cost-effective and high-throughput technique that can meet this scalability requirement. This work presents a mask-templating nanoimpr…
▽ More
Metasurfaces enable precise control over the properties of light and hold promise for commercial applications. However, fabricating visible metasurfaces suitable for high-volume production is challenging and requires scalable processes. Nanoimprint lithography is a cost-effective and high-throughput technique that can meet this scalability requirement. This work presents a mask-templating nanoimprint lithography process for fabricating metasurfaces with varying fill factors and negligible wavefront aberrations using composite stamps. As a proof-of-concept, a 6 mm diameter metalens formed of silicon nitride nano-posts with a numerical aperture of 0.2 that operates at 550 nm is demonstrated. The nanoimprinted metalens achieves a peak focusing efficiency of ($81\pm1$)%, comparable to the control metalens made with electron beam lithography with a focusing efficiency of ($89\pm1$)%. Spatially resolved deflection efficiency and wavefront data, which informs design and process optimization, is also presented. These results highlight nanoimprint lithography as a cost-effective, scalable method for visible metasurface fabrication that has the potential for widespread adoption in consumer electronics and imaging systems.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Model for the structure function constant for index of refraction fluctuations in Rayleigh-Benard turbulence
Authors:
Robert A. Handler,
Richard J. Watkins,
Silvia Matt,
K. P. Judd
Abstract:
A model for the structure function constant associated with index of refraction fluctuations in Rayleigh-Benard turbulence is developed. The model is based upon the following assumptions: (1) the turbulence is homogeneous and isotropic at or near the mid-plane, (2) the rate of production is in balance with the rate of dissipation, (3) an inertial region exists, and (4) estimates for the rate of di…
▽ More
A model for the structure function constant associated with index of refraction fluctuations in Rayleigh-Benard turbulence is developed. The model is based upon the following assumptions: (1) the turbulence is homogeneous and isotropic at or near the mid-plane, (2) the rate of production is in balance with the rate of dissipation, (3) an inertial region exists, and (4) estimates for the rate of dissipation of temperature fluctuations and of turbulent kinetic energy can be made by assuming that the large-scale turbulence is dissipated in one eddy turnover time. From these assumptions, the dependence of the structure function on the geometry, heat flux, and the properties of the fluid is obtained. The model predicts that the normalized structure function constant is independent of the Rayleigh number. To verify the model, numerical simulations of Rayleigh-Benard turbulence were performed using two different approaches: an in-house code based on a pseudo-spectral method, and a finite volume code which employs a model for the smallest scales of the turbulence. The model was found to agree with the results of the simulations, thereby lending support for the assumptions underlying the theory.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Performance portable ice-sheet modeling with MALI
Authors:
Jerry Watkins,
Max Carlson,
Kyle Shan,
Irina Tezaur,
Mauro Perego,
Luca Bertagna,
Carolyn Kao,
Matthew J. Hoffman,
Stephen F. Price
Abstract:
High resolution simulations of polar ice-sheets play a crucial role in the ongoing effort to develop more accurate and reliable Earth-system models for probabilistic sea-level projections. These simulations often require a massive amount of memory and computation from large supercomputing clusters to provide sufficient accuracy and resolution. The latest exascale machines poised to come online con…
▽ More
High resolution simulations of polar ice-sheets play a crucial role in the ongoing effort to develop more accurate and reliable Earth-system models for probabilistic sea-level projections. These simulations often require a massive amount of memory and computation from large supercomputing clusters to provide sufficient accuracy and resolution. The latest exascale machines poised to come online contain a diverse set of computing architectures. In an effort to avoid architecture specific programming and maintain productivity across platforms, the ice-sheet modeling code known as MALI uses high level abstractions to integrate Trilinos libraries and the Kokkos programming model for performance portable code across a variety of different architectures. In this paper, we analyze the performance portable features of MALI via a performance analysis on current CPU-based and GPU-based supercomputers. The analysis highlights performance portable improvements made in finite element assembly and multigrid preconditioning within MALI with speedups between 1.26-1.82x across CPU and GPU architectures but also identifies the need to further improve performance in software coupling and preconditioning on GPUs. We also perform a weak scalability study and show that simulations on GPU-based machines perform 1.24-1.92x faster when utilizing the GPUs. The best performance is found in finite element assembly which achieved a speedup of up to 8.65x and a weak scaling efficiency of 82.9% with GPUs. We additionally describe an automated performance testing framework developed for this code base using a changepoint detection method. The framework is used to make actionable decisions about performance within MALI. We provide several concrete examples of scenarios in which the framework has identified performance regressions, improvements, and algorithm differences over the course of two years of development.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Demonstration of the Rodeo Algorithm on a Quantum Computer
Authors:
Zhengrong Qian,
Jacob Watkins,
Gabriel Given,
Joey Bonitati,
Kenneth Choi,
Dean Lee
Abstract:
The rodeo algorithm is an efficient algorithm for eigenstate preparation and eigenvalue estimation for any observable on a quantum computer. This makes it a promising tool for studying the spectrum and structure of atomic nuclei as well as other fields of quantum many-body physics. The only requirement is that the initial state has sufficient overlap probability with the desired eigenstate. While…
▽ More
The rodeo algorithm is an efficient algorithm for eigenstate preparation and eigenvalue estimation for any observable on a quantum computer. This makes it a promising tool for studying the spectrum and structure of atomic nuclei as well as other fields of quantum many-body physics. The only requirement is that the initial state has sufficient overlap probability with the desired eigenstate. While it is exponentially faster than well-known algorithms such as phase estimation and adiabatic evolution for eigenstate preparation, it has yet to be implemented on an actual quantum device. In this work, we apply the rodeo algorithm to determine the energy levels of a random one-qubit Hamiltonian, resulting in a relative error of $0.08\%$ using mid-circuit measurements on the IBM Q device Casablanca. This surpasses the accuracy of directly-prepared eigenvector expectation values using the same quantum device. We take advantage of the high-accuracy energy determination and use the Hellmann-Feynman theorem to compute eigenvector expectation values for a different random one-qubit observable. For the Hellmann-Feynman calculations, we find a relative error of $0.7\%$. We conclude by discussing possible future applications of the rodeo algorithm for multi-qubit Hamiltonians.
△ Less
Submitted 1 July, 2024; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Modeling Intense-Electron-Beam Generated Plasmas Using a Rigid-Beam Approximation
Authors:
A. S. Richardson,
S. B. Swanekamp,
N. D. Isner,
D. D. Hinshelwood,
D. Mosher,
P. E. Adamson,
I. M. Rittersdorf,
Tz. B. Petrova,
D. J. Watkins
Abstract:
A model of an electron-beam-plasma system is introduced to model the electrical breakdown physics of low-pressure nitrogen irradiated by an intense pulsed electron beam. The rapidly rising beam current induces an electric field which drives a return current in the plasma. The rigid-beam model is a reduction of the problem geometry to cylindrical coordinates and simplifications to Maxwell's equatio…
▽ More
A model of an electron-beam-plasma system is introduced to model the electrical breakdown physics of low-pressure nitrogen irradiated by an intense pulsed electron beam. The rapidly rising beam current induces an electric field which drives a return current in the plasma. The rigid-beam model is a reduction of the problem geometry to cylindrical coordinates and simplifications to Maxwell's equations that are driven by a prescribed electron beam current density. The model is convenient for comparing various reductions of the plasma dynamics and plasma chemistry while maintaining a good approximation to the overall magnitude of the beam-created electric field. The usefulness of this model is demonstrated by coupling the rigid-beam model to a fluid plasma model and a simplified nitrogen plasma chemistry. The dynamics of this coupled system are computed for a range of background gas pressures, and the results are compared with experimental measurements. At pressures 1 Torr and above, the simulated line-integrated electron densities are within a factor of two of measurements, and show the same trend with pressure as observed in experiment.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
The EXO-200 detector, part II: Auxiliary Systems
Authors:
N. Ackerman,
J. Albert,
M. Auger,
D. J. Auty,
I. Badhrees,
P. S. Barbeau,
L. Bartoszek,
E. Baussan,
V. Belov,
C. Benitez-Medina,
T. Bhatta,
M. Breidenbach,
T. Brunner,
G. F. Cao,
W. R. Cen,
C. Chambers,
B. Cleveland,
R. Conley,
S. Cook,
M. Coon,
W. Craddock,
A. Craycraft,
W. Cree,
T. Daniels,
L. Darroch
, et al. (135 additional authors not shown)
Abstract:
The EXO-200 experiment searched for neutrinoless double-beta decay of $^{136}$Xe with a single-phase liquid xenon detector. It used an active mass of 110 kg of 80.6%-enriched liquid xenon in an ultra-low background time projection chamber with ionization and scintillation detection and readout. This paper describes the design and performance of the various support systems necessary for detector op…
▽ More
The EXO-200 experiment searched for neutrinoless double-beta decay of $^{136}$Xe with a single-phase liquid xenon detector. It used an active mass of 110 kg of 80.6%-enriched liquid xenon in an ultra-low background time projection chamber with ionization and scintillation detection and readout. This paper describes the design and performance of the various support systems necessary for detector operation, including cryogenics, xenon handling, and controls. Novel features of the system were driven by the need to protect the thin-walled detector chamber containing the liquid xenon, to achieve high chemical purity of the Xe, and to maintain thermal uniformity across the detector.
△ Less
Submitted 22 October, 2021; v1 submitted 13 July, 2021;
originally announced July 2021.
-
INGRID: an interactive grid generator for 2D edge plasma modeling
Authors:
B. M. Garcia,
M. V. Umansky,
J. Watkins,
J. Guterl,
O. Izacard
Abstract:
A fusion boundary-plasma domain is defined by axisymmetric magnetic surfaces where the geometry is often complicated by the presence of one or more X-points; and modeling boundary plasmas usually relies on computational grids that account for the magnetic field geometry. The new grid generator INGRID (Interactive Grid Generator) presented here is a Python-based code for calculating grids for fusio…
▽ More
A fusion boundary-plasma domain is defined by axisymmetric magnetic surfaces where the geometry is often complicated by the presence of one or more X-points; and modeling boundary plasmas usually relies on computational grids that account for the magnetic field geometry. The new grid generator INGRID (Interactive Grid Generator) presented here is a Python-based code for calculating grids for fusion boundary plasma modeling, for a variety of configurations with one or two X-points in the domain. Based on a given geometry of the magnetic field, INGRID first calculates a skeleton grid which consists of a small number of quadrilateral patches; then it puts a subgrid on each of the patches, and joins them in a global grid. This domain partitioning strategy makes possible a uniform treatment of various configurations with one or two X-points in the domain. This includes single-null, double-null, and other configurations with two X-points in the domain. The INGRID design allows generating grids either interactively, via a parameter-file driven GUI, or using a non-interactive script-controlled workflow. Results of testing demonstrate that INGRID is a flexible, robust, and user-friendly grid-generation tool for fusion boundary-plasma modeling.
△ Less
Submitted 14 June, 2021; v1 submitted 13 February, 2021;
originally announced February 2021.
-
Observation of quasi-coherent density fluctuation in scrape-off layer enhancing boundary transport in high-betaN hybrid plasmas on DIII-D
Authors:
R. Hong,
T. L. Rhodes,
Z. Y. Li,
H. Wang,
L. Zeng,
K. Barada,
G. Wang,
J. G. Watkins,
W. A. Peebles
Abstract:
We report the observation of a quasi-coherent density fluctuation (QCF) by the Doppler backscattering system in the scrape-off layer (SOL) region of the DIII-D tokamak. This QCF is observed in high-power, high-performance hybrid plasmas with near double-null divertor (DND) shape during the electron cyclotron heating period. This mode is correlated with a steepened SOL density profile and leads to…
▽ More
We report the observation of a quasi-coherent density fluctuation (QCF) by the Doppler backscattering system in the scrape-off layer (SOL) region of the DIII-D tokamak. This QCF is observed in high-power, high-performance hybrid plasmas with near double-null divertor (DND) shape during the electron cyclotron heating period. This mode is correlated with a steepened SOL density profile and leads to significantly elevated particle and heat fluxes between ELMs. The SOL QCF is a long-wavelength ion-scale fluctuation and propagates in the ion diamagnetic direction in the plasma frame. Its radial expanse is about 1.5-2 cm, well beyond the typical width of heat flux on DIII-D. Also, the SOL QCF does not show any clear dependence on the effective SOL collisionality and thus may raise issues on the control of plasma-material interactions in low collisionality plasmas in which the blob-induced transport is reduced. A linear simulation using BOUT++ with a 5-field reduced model is performed and compared with experimental observations. In simulation results, an interchange-like density perturbation can be driven by the SOL density gradient, and its peak location and the radial width of the density perturbation are in agreement with the experimental observations.
△ Less
Submitted 19 March, 2021; v1 submitted 10 November, 2020;
originally announced November 2020.
-
Rodeo Algorithm for Quantum Computing
Authors:
Kenneth Choi,
Dean Lee,
Joey Bonitati,
Zhengrong Qian,
Jacob Watkins
Abstract:
We present a stochastic quantum computing algorithm that can prepare any eigenvector of a quantum Hamiltonian within a selected energy interval $[E-ε, E+ε]$. In order to reduce the spectral weight of all other eigenvectors by a suppression factor $δ$, the required computational effort scales as $O[|\log δ|/(p ε)]$, where $p$ is the squared overlap of the initial state with the target eigenvector.…
▽ More
We present a stochastic quantum computing algorithm that can prepare any eigenvector of a quantum Hamiltonian within a selected energy interval $[E-ε, E+ε]$. In order to reduce the spectral weight of all other eigenvectors by a suppression factor $δ$, the required computational effort scales as $O[|\log δ|/(p ε)]$, where $p$ is the squared overlap of the initial state with the target eigenvector. The method, which we call the rodeo algorithm, uses auxiliary qubits to control the time evolution of the Hamiltonian minus some tunable parameter $E$. With each auxiliary qubit measurement, the amplitudes of the eigenvectors are multiplied by a stochastic factor that depends on the proximity of their energy to $E$. In this manner, we converge to the target eigenvector with exponential accuracy in the number of measurements. In addition to preparing eigenvectors, the method can also compute the full spectrum of the Hamiltonian. We illustrate the performance with several examples. For energy eigenvalue determination with error $ε$, the computational scaling is $O[(\log ε)^2/(p ε)]$. For eigenstate preparation, the computational scaling is $O(\log Δ/p)$, where $Δ$ is the magnitude of the orthogonal component of the residual vector. The speed for eigenstate preparation is exponentially faster than that for phase estimation or adiabatic evolution.
△ Less
Submitted 9 June, 2021; v1 submitted 9 September, 2020;
originally announced September 2020.
-
TurboPy: A Lightweight Python Framework for Computational Physics
Authors:
A. S. Richardson,
D. F. Gordon,
S. B. Swanekamp,
I. M. Rittersdorf,
P. E. Adamson,
O. S. Grannis,
G. T. Morgan,
A. Ostenfeld,
K. L. Phlips,
C. G. Sun,
G. Tang,
D. J. Watkins
Abstract:
Computational physics problems often have a common set of aspects to them that any particular numerical code will have to address. Because these aspects are common to many problems, having a framework already designed and ready to use will not only speed the development of new codes, but also enhance compatibility between codes. Some of the most common aspects of computational physics problems are…
▽ More
Computational physics problems often have a common set of aspects to them that any particular numerical code will have to address. Because these aspects are common to many problems, having a framework already designed and ready to use will not only speed the development of new codes, but also enhance compatibility between codes. Some of the most common aspects of computational physics problems are: a grid, a clock which tracks the flow of the simulation, and a set of models describing the dynamics of various quantities on the grid. Having a framework that could deal with these basic aspects of the simulation in a common way could provide great value to computational scientists by solving various numerical and class design issues that routinely arise. This paper describes the newly developed computational framework that we have built for rapidly prototy** new physics codes. This framework, called turboPy, is a lightweight physics modeling framework based on the design of the particle-in-cell code turboWAVE. It implements a class (called Simulation) which drives the simulation and manages communication between physics modules, a class (called PhysicsModule) which handles the details of the dynamics of the various parts of the problem, and some additional classes such as a Grid class and a Diagnostic class to handle various ancillary issues that commonly arise.
△ Less
Submitted 9 September, 2020; v1 submitted 20 February, 2020;
originally announced February 2020.
-
Reflectance of Silicon Photomultipliers at Vacuum Ultraviolet Wavelengths
Authors:
P. Lv,
G. F. Cao,
L. J. Wen,
S. Al Kharusi,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
P. A. Breur,
J. P. Brodsky,
E. Brown,
T. Brunner,
S. Byrne Mamahit,
E. Caden,
L. Cao,
C. Chambers,
B. Chana,
S. A. Charlebois,
M. Chiu,
B. Cleveland,
M. Coon,
A. Craycraft
, et al. (126 additional authors not shown)
Abstract:
Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinct…
▽ More
Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinction coefficient of the thin silicon-dioxide film deposited on the surface of the FBK SiPMs are derived from reflectance data of a FBK silicon wafer with the same deposited oxide film as SiPMs. The diffuse reflectance of SiPMs is also measured at 193 nm. We use the VUV spectral dependence of the optical constants to predict the reflectance of the FBK silicon wafer and FBK SiPMs in liquid xenon.
△ Less
Submitted 4 December, 2019;
originally announced December 2019.
-
Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode
Authors:
O. Njoya,
T. Tsang,
M. Tarka,
W. Fairbank,
K. S. Kumar,
T. Rao,
T. Wager,
S. Al Kharusi,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
J. P. Brodsky,
E. Brown,
T. Brunner,
E. Caden,
G. F. Cao,
L. Cao,
W. R. Cen,
C. Chambers,
B. Chana,
S. A. Charlebois
, et al. (131 additional authors not shown)
Abstract:
Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measur…
▽ More
Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are $1.97 \pm 0.04$ mm/$μ$s and $(-0.69\pm0.05)$\%/K for liquid xenon, and $1.42 \pm 0.03$ mm/$μ$s and $(+0.11\pm0.01)$\%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of $25.7 \pm 4.6$ cm$^2$/s and $149 \pm 23$ cm$^2$/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors.
△ Less
Submitted 24 November, 2019;
originally announced November 2019.
-
Reflectivity and PDE of VUV4 Hamamatsu SiPMs in Liquid Xenon
Authors:
P. Nakarmi,
I. Ostrovskiy,
A. K. Soma,
F. Retiere,
S. Al Kharusi,
M. Alfaris,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
J. Blatchford,
P. A. Breur,
J. P. Brodsky,
E. Brown,
T. Brunner,
S. Byrne Mamahit,
E. Caden,
G. F. Cao,
L. Cao,
C. Chambers,
B. Chana,
S. A. Charlebois
, et al. (130 additional authors not shown)
Abstract:
Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently a…
▽ More
Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently available about reflectivity and PDE in liquid noble gases, because such measurements are difficult to conduct in a cryogenic environment and at short enough wavelengths. Here we report a measurement of specular reflectivity and relative PDE of Hamamatsu VUV4 silicon photomultipliers (SiPMs) with 50 micrometer micro-cells conducted with xenon scintillation light (~175 nm) in liquid xenon. The specular reflectivity at 15 deg. incidence of three samples of VUV4 SiPMs is found to be 30.4+/-1.4%, 28.6+/-1.3%, and 28.0+/-1.3%, respectively. The PDE at normal incidence differs by +/-8% (standard deviation) among the three devices. The angular dependence of the reflectivity and PDE was also measured for one of the SiPMs. Both the reflectivity and PDE decrease as the angle of incidence increases. This is the first measurement of an angular dependence of PDE and reflectivity of a SiPM in liquid xenon.
△ Less
Submitted 24 December, 2019; v1 submitted 14 October, 2019;
originally announced October 2019.
-
Measurement of the scintillation and ionization response of liquid xenon at MeV energies in the EXO-200 experiment
Authors:
EXO-200 Collaboration,
:,
G. Anton,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
M. Breidenbach,
T. Brunner,
G. F. Cao,
W. R. Cen,
C. Chambers,
B. Cleveland,
M. Coon,
A. Craycraft,
T. Daniels,
L. Darroch,
S. J. Daugherty,
J. Davis,
S. Delaquis,
A. Der Mesrobian-Kabakian,
R. DeVoe,
J. Dilling,
A. Dolgolenko
, et al. (78 additional authors not shown)
Abstract:
Liquid xenon (LXe) is employed in a number of current and future detectors for rare event searches. We use the EXO-200 experimental data to measure the absolute scintillation and ionization yields generated by $γ$ interactions from $^{228}$Th (2615~keV), $^{226}$Ra (1764~keV) and $^{60}$Co (1332~keV and 1173~keV) calibration sources, over a range of electric fields. The $W$-value that defines the…
▽ More
Liquid xenon (LXe) is employed in a number of current and future detectors for rare event searches. We use the EXO-200 experimental data to measure the absolute scintillation and ionization yields generated by $γ$ interactions from $^{228}$Th (2615~keV), $^{226}$Ra (1764~keV) and $^{60}$Co (1332~keV and 1173~keV) calibration sources, over a range of electric fields. The $W$-value that defines the recombination-independent energy scale is measured to be $11.5~\pm~0.5$~(syst.)~$\pm~0.1$~(stat.) eV. These data are also used to measure the recombination fluctuations in the number of electrons and photons produced by the calibration sources at the MeV-scale, which deviate from extrapolations of lower-energy data. Additionally, a semi-empirical model for the energy resolution of the detector is developed, which is used to constrain the recombination efficiency, i.e., the fraction of recombined electrons that result in the emission of a detectable photon. Detailed measurements of the absolute charge and light yields for MeV-scale electron recoils are important for predicting the performance of future neutrinoless double beta decay detectors.
△ Less
Submitted 15 June, 2020; v1 submitted 12 August, 2019;
originally announced August 2019.
-
Simulation of charge readout with segmented tiles in nEXO
Authors:
Z. Li,
W. R. Cen,
A. Robinson,
D. C. Moore,
L. J. Wen,
A. Odian,
S. Al Kharusi,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
J. P. Brodsky,
E. Brown,
T. Brunner,
E. Caden,
G. F. Cao,
L. Cao,
C. Chambers,
B. Chana,
S. A. Charlebois,
M. Chiu,
B. Cleveland
, et al. (128 additional authors not shown)
Abstract:
nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neu…
▽ More
nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neural network are developed to distinguish simulated $0νββ$ signals from backgrounds arising from trace levels of natural radioactivity in the detector materials. These simulations indicate that the nEXO TPC with charge-collection tiles shows promising capability to discriminate the $0νββ$ signal from backgrounds. The estimated half-life sensitivity for $0νββ$ decay is improved by $\sim$20$~(32)\%$ with the multi-variate~(deep neural network) methods considered here, relative to the sensitivity estimated in the nEXO pre-conceptual design report.
△ Less
Submitted 11 October, 2019; v1 submitted 17 July, 2019;
originally announced July 2019.
-
Characterization of the Hamamatsu VUV4 MPPCs for nEXO
Authors:
G. Gallina,
P. Giampa,
F. Retiere,
J. Kroeger,
G. Zhang,
M. Ward,
P. Margetak,
G. Lic,
T. Tsang,
L. Doria,
S. Al Kharusi,
M. Alfaris,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
J. Blatchford,
J. P. Brodsky,
E. Brown,
T. Brunner,
G. F. Cao,
L. Cao
, et al. (126 additional authors not shown)
Abstract:
In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency…
▽ More
In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency (PDE) were measured in a dedicated setup at TRIUMF. SiPMs were characterized in the range $163 \text{ } \text{K} \leq \text{T}\leq 233 \text{ } \text{K}$. At an over voltage of $3.1\pm0.2$ V and at $\text{T}=163 \text{ }\text{K}$ we report a number of Correlated Avalanches (CAs) per pulse in the $1 \upmu\text{s}$ interval following the trigger pulse of $0.161\pm0.005$. At the same settings the Dark-Noise (DN) rate is $0.137\pm0.002 \text{ Hz/mm}^{2}$. Both the number of CAs and the DN rate are within nEXO specifications. The PDE of the Hamamatsu VUV4 was measured for two different devices at $\text{T}=233 \text{ }\text{K}$ for a mean wavelength of $189\pm7\text{ nm}$. At $3.6\pm0.2$ V and $3.5\pm0.2$ V of over voltage we report a PDE of $13.4\pm2.6\text{ }\%$ and $11\pm2\%$, corresponding to a saturation PDE of $14.8\pm2.8\text{ }\%$ and $12.2\pm2.3\%$, respectively. Both values are well below the $24\text{ }\%$ saturation PDE advertised by Hamamatsu. More generally, the second device tested at $3.5\pm0.2$ V of over voltage is below the nEXO PDE requirement. The first one instead yields a PDE that is marginally close to meeting the nEXO specifications. This suggests that with modest improvements the Hamamatsu VUV4 MPPCs could be considered as an alternative to the FBK-LF SiPMs for the final design of the nEXO detector.
△ Less
Submitted 7 June, 2019; v1 submitted 8 March, 2019;
originally announced March 2019.
-
Study of Silicon Photomultiplier Performance in External Electric Fields
Authors:
X. L. Sun,
T. Tolba,
G. F. Cao,
P. Lv,
L. J. Wen,
A. Odian,
F. Vachon,
A. Alamre,
J. B. Albert,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
F. Bourque,
J. P. Brodsky,
E. Brown,
T. Brunner,
A. Burenkov,
L. Cao,
W. R. Cen,
C. Chambers,
S. A. Charlebois
, et al. (127 additional authors not shown)
Abstract:
We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estima…
▽ More
We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estimated uncertainties. No observable physical damage to the bulk or surface of the devices was caused by the exposure.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
Imaging individual barium atoms in solid xenon for barium tagging in nEXO
Authors:
C. Chambers,
T. Walton,
D. Fairbank,
A. Craycraft,
D. R. Yahne,
J. Todd,
A. Iverson,
W. Fairbank,
A. Alamare,
J. B. Albert,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
F. Bourque,
J. P. Brodsky,
E. Brown,
T. Brunner,
A. Burenkov,
G. F. Cao,
L. Cao,
W. R. Cen
, et al. (126 additional authors not shown)
Abstract:
The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a…
▽ More
The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a technique for eliminating backgrounds in the nEXO neutrinoless double beta decay experiment. The tagging scheme studied in this work utilizes a cryogenic probe to trap the barium atom in solid xenon, where the barium atom is tagged via fluorescence imaging in the solid xenon matrix. Here we demonstrate imaging and counting of individual atoms of barium in solid xenon by scanning a focused laser across a solid xenon matrix deposited on a sapphire window. When the laser sits on an individual atom, the fluorescence persists for $\sim$30~s before drop** abruptly to the background level, a clear confirmation of one-atom imaging. No barium fluorescence persists following evaporation of a barium deposit to a limit of $\leq$0.16\%. This is the first time that single atoms have been imaged in solid noble element. It establishes the basic principle of a barium tagging technique for nEXO.
△ Less
Submitted 12 December, 2018; v1 submitted 27 June, 2018;
originally announced June 2018.
-
nEXO Pre-Conceptual Design Report
Authors:
nEXO Collaboration,
S. Al Kharusi,
A. Alamre,
J. B. Albert,
M. Alfaris,
G. Anton,
I. J. Arnquist,
I. Badhrees,
P. S. Barbeau,
D. Beck,
V. Belov,
T. Bhatta,
F. Bourque,
J. P. Brodsky,
E. Brown,
T. Brunner,
A. Burenkov,
G. F. Cao,
L. Cao,
W. R. Cen,
C. Chambers,
S. A. Charlebois,
M. Chiu,
B. Cleveland,
R. Conley
, et al. (149 additional authors not shown)
Abstract:
The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of app…
▽ More
The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of approximately $10^{28}$ years. This represents an improvement in sensitivity of about two orders of magnitude with respect to current results. Based on the experience gained from EXO-200 and the effectiveness of xenon purification techniques, we expect the background to be dominated by external sources of radiation. The sensitivity increase is, therefore, entirely derived from the increase of active mass in a monolithic and homogeneous detector, along with some technical advances perfected in the course of a dedicated R&D program. Hence the risk which is inherent to the construction of a large, ultra-low background detector is reduced, as the intrinsic radioactive contamination requirements are generally not beyond those demonstrated with the present generation $0νββ$ decay experiments. Indeed, most of the required materials have been already assayed or reasonable estimates of their properties are at hand. The details described herein represent the base design of the detector configuration as of early 2018. Where potential design improvements are possible, alternatives are discussed.
This design for nEXO presents a compelling path towards a next generation search for $0νββ$, with a substantial possibility to discover physics beyond the Standard Model.
△ Less
Submitted 13 August, 2018; v1 submitted 28 May, 2018;
originally announced May 2018.
-
Deep Neural Networks for Energy and Position Reconstruction in EXO-200
Authors:
S. Delaquis,
M. J. Jewell,
I. Ostrovskiy,
M. Weber,
T. Ziegler,
J. Dalmasson,
L. J. Kaufman,
T. Richards,
J. B. Albert,
G. Anton,
I. Badhrees,
P. S. Barbeau,
R. Bayerlein,
D. Beck,
V. Belov,
M. Breidenbach,
T. Brunner,
G. F. Cao,
W. R. Cen,
C. Chambers,
B. Cleveland,
M. Coon,
A. Craycraft,
W. Cree,
T. Daniels
, et al. (69 additional authors not shown)
Abstract:
We apply deep neural networks (DNN) to data from the EXO-200 experiment. In the studied cases, the DNN is able to reconstruct the relevant parameters - total energy and position - directly from raw digitized waveforms, with minimal exceptions. For the first time, the developed algorithms are evaluated on real detector calibration data. The accuracy of reconstruction either reaches or exceeds what…
▽ More
We apply deep neural networks (DNN) to data from the EXO-200 experiment. In the studied cases, the DNN is able to reconstruct the relevant parameters - total energy and position - directly from raw digitized waveforms, with minimal exceptions. For the first time, the developed algorithms are evaluated on real detector calibration data. The accuracy of reconstruction either reaches or exceeds what was achieved by the conventional approaches developed by EXO-200 over the course of the experiment. Most existing DNN approaches to event reconstruction and classification in particle physics are trained on Monte Carlo simulated events. Such algorithms are inherently limited by the accuracy of the simulation. We describe a unique approach that, in an experiment such as EXO-200, allows to successfully perform certain reconstruction and analysis tasks by training the network on waveforms from experimental data, either reducing or eliminating the reliance on the Monte Carlo.
△ Less
Submitted 30 August, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
Nucleation, solvation and boiling of helium excimer clusters
Authors:
Luis G. Mendoza Luna,
Nagham M. Siltagh,
Mark J. Watkins,
Nelly Bonifaci,
Frederic Aitken,
Klaus von Haeften
Abstract:
Helium excimers generated by a corona discharge were investigated in the gas and normal liquid phases of helium as a function of temperature and pressure between 3.8 and 5.0 K and 0.2 and 5.6 bar. Intense fluorescence in the visible region showed the rotationally resolved $d^3Σ_u^+ \rightarrow b^3Π_g$ transition of He$_2^*$. With increasing pressure, the rotational lines merged into single feature…
▽ More
Helium excimers generated by a corona discharge were investigated in the gas and normal liquid phases of helium as a function of temperature and pressure between 3.8 and 5.0 K and 0.2 and 5.6 bar. Intense fluorescence in the visible region showed the rotationally resolved $d^3Σ_u^+ \rightarrow b^3Π_g$ transition of He$_2^*$. With increasing pressure, the rotational lines merged into single features. The observed pressure dependence of linewidths, shapes and lineshifts established phases of coexistence and separation of excimer-helium mixtures, providing detailed insight into nucleation, solvation and boiling of He$_2^*$-He$_n$ clusters.
△ Less
Submitted 6 December, 2015;
originally announced December 2015.
-
A Monte Carlo wavefunction method for semiclassical simulations of spin-position entanglement
Authors:
C. J. Billington,
C. J. Watkins,
R. P. Anderson,
L. D. Turner
Abstract:
We present a Monte Carlo wavefunction method for semiclassically modeling spin-$\frac12$ systems in a magnetic field gradient in one dimension. Our model resolves the conflict of determining what classical force an atom should be subjected to when it is in an arbitrary superposition of internal states. Spatial degrees of freedom are considered to be an environment, entanglement with which decohere…
▽ More
We present a Monte Carlo wavefunction method for semiclassically modeling spin-$\frac12$ systems in a magnetic field gradient in one dimension. Our model resolves the conflict of determining what classical force an atom should be subjected to when it is in an arbitrary superposition of internal states. Spatial degrees of freedom are considered to be an environment, entanglement with which decoheres the internal states. Atoms follow classical trajectories through space, punctuated by probabilistic jumps between spin states.
We modify the conventional Monte Carlo wavefunction method to jump between states when population transfer occurs, rather than when population is later discarded via exponential decay. This results in a spinor wavefunction that is continuous in time, and allows us to model the classical particle trajectories (evolution of the environment variables) more accurately. The model is not computationally demanding and it agrees well with simulations of the full spatial wavefunction of an atom.
△ Less
Submitted 23 February, 2015;
originally announced February 2015.
-
Probing the structure and dynamics of molecular clusters using rotational wavepackets
Authors:
Gediminas Galinis,
Cephise Cacho,
Richard T. Chapman,
Andrew M. Ellis,
Marius Lewerenz,
Luis G. Mendoza Luna,
Russell S. Minns,
Mirjana Mladenovic,
Arnaud Rouzée,
Emma Springate,
I. C. Edmond Turcu,
Mark J. Watkins,
Klaus von Haeften
Abstract:
The chemical and physical properties of molecular clusters can heavily depend on their size, which makes them very attractive for the design of new materials with tailored properties. Deriving the structure and dynamics of clusters is therefore of major interest in science. Weakly bound clusters can be studied using conventional spectroscopic techniques, but the number of lines observed is often t…
▽ More
The chemical and physical properties of molecular clusters can heavily depend on their size, which makes them very attractive for the design of new materials with tailored properties. Deriving the structure and dynamics of clusters is therefore of major interest in science. Weakly bound clusters can be studied using conventional spectroscopic techniques, but the number of lines observed is often too small for a comprehensive structural analysis. Impulsive alignment generates rotational wavepackets, which provides simultaneous information on structure and dynamics, as has been demonstrated successfully for isolated molecules. Here, we apply this technique for the firsttime to clusters comprising of a molecule and a single helium atom. By forcing the population of high rotational levels in intense laser fields we demonstrate the generation of rich rotational line spectra for this system, establishing the highly delocalised structure and the coherence of rotational wavepacket propagation. Our findings enable studies of clusters of different sizes and complexity as well as incipient superfluidity effects using wavepacket methods.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
Disciplinary authenticity: Enriching the reforms of introductory physics courses for life-science students
Authors:
Jessica Watkins,
Janet E. Coffey,
Edward F. Redish,
Todd J. Cooke
Abstract:
Educators and policy-makers have advocated for reform of undergraduate biology education, calling for greater integration of mathematics and physics in the biology curriculum. While these calls reflect the increasingly interdisciplinary nature of biology research, crossing disciplinary boundaries in the classroom carries epistemological challenges for both instructors and students. In this paper w…
▽ More
Educators and policy-makers have advocated for reform of undergraduate biology education, calling for greater integration of mathematics and physics in the biology curriculum. While these calls reflect the increasingly interdisciplinary nature of biology research, crossing disciplinary boundaries in the classroom carries epistemological challenges for both instructors and students. In this paper we expand on the construct of authenticity to better describe and understand disciplinary practices, in particular to examine those used in physics and biology courses. We then apply these ideas to examine an introductory biology course that incorporates physics and mathematics. We characterize the uses of interdisciplinary tools in this biology course and contrast them with the typical uses of these tools in physics courses. Finally, we examine student responses to the use of mathematics and physics in this course, to better understand the challenges and consequences of using interdisciplinary tools in introductory courses. We link these results to the reform initiatives of introductory physics courses for life-science students.
△ Less
Submitted 22 September, 2011;
originally announced September 2011.
-
Students' Views of Macroscopic and Microscopic Energy in Physics and Biology
Authors:
Benjamin W. Dreyfus,
Edward F. Redish,
Jessica Watkins
Abstract:
Energy concepts are fundamental across the sciences, yet these concepts can be fragmented along disciplinary boundaries, rather than integrated into a coherent whole. To teach physics effectively to biology students, we need to understand students' disciplinary perspectives. We present interview data from an undergraduate student who displays multiple stances towards the concept of energy. At time…
▽ More
Energy concepts are fundamental across the sciences, yet these concepts can be fragmented along disciplinary boundaries, rather than integrated into a coherent whole. To teach physics effectively to biology students, we need to understand students' disciplinary perspectives. We present interview data from an undergraduate student who displays multiple stances towards the concept of energy. At times he views energy in macroscopic contexts as a separate entity from energy in microscopic (particularly biological) contexts, while at other times he uses macroscopic physics phenomena as productive analogies for understanding energy in the microscopic biological context, and he reasons about energy transformations between the microscopic and macroscopic scales. This case study displays preliminary evidence for the context dependence of students' ability to translate energy concepts across scientific disciplines. This points to challenges that must be taken into account in develo** curricula for biology students that integrate physics and biology concepts.
△ Less
Submitted 28 June, 2011;
originally announced June 2011.
-
Examining the Impact of Student Expectations on Undergraduate Biology Education Reform
Authors:
Kristi L. Hall,
Jessica E. Watkins,
Janet E. Coffey,
Todd J. Cooke,
Edward F. Redish
Abstract:
The past 10-15 years have seen numerous calls for curricular reform in undergraduate biology education, most of which focus on changes to curriculum or pedagogy. Data collected from students in a large introductory undergraduate biology course indicate that student expectations about the nature of the knowledge they were learning influence how they interacted with reform efforts in that class. Giv…
▽ More
The past 10-15 years have seen numerous calls for curricular reform in undergraduate biology education, most of which focus on changes to curriculum or pedagogy. Data collected from students in a large introductory undergraduate biology course indicate that student expectations about the nature of the knowledge they were learning influence how they interacted with reform efforts in that class. Given that student expectations influence the ways in whichthey participate in course activities, this paper (the first in a series that looks at student expectations in biology) argues that curriculum reform initiatives should consider student expectations in order to increase the chance for effective implementation.
△ Less
Submitted 31 May, 2011;
originally announced May 2011.
-
Understanding How Students Use Physical Ideas in Introductory Biology Courses
Authors:
Jessica Watkins,
Kristi Hall,
Edward Redish,
Todd Cooke
Abstract:
The University of Maryland (UMD) Biology Education and Physics Education Research Groups are investigating students' views on the role of physics in introductory biology courses. This paper presents data from an introductory course that addresses the fundamental principles of organismal biology and that incorporates several topics directly related to physics, including thermodynamics, diffusion, a…
▽ More
The University of Maryland (UMD) Biology Education and Physics Education Research Groups are investigating students' views on the role of physics in introductory biology courses. This paper presents data from an introductory course that addresses the fundamental principles of organismal biology and that incorporates several topics directly related to physics, including thermodynamics, diffusion, and fluid flow. We examine how the instructors use mathematics and physics in this introductory biology course and look at two students' responses to this use. Our preliminary observations are intended to start a discussion about the epistemological issues resulting from the integration of the science disciplines and to motivate the need for further research.
△ Less
Submitted 6 September, 2010;
originally announced September 2010.
