-
Beamfit: Algorithmic Wavefront Reconstruction of Laser Beams Using Multiple Intensity Images and Laguerre- or Hermite-Gaussian Basis
Authors:
Kevin Weber,
Jonathan Joseph Carter,
Sina Maria Koehlenbeck,
Gudrun Wanner,
Gerhard Heinzel
Abstract:
Wavefront errors are a common artifact in laser light generation and imaging. They can be described as an aberration from the spherical wavefront of an ideal Gaussian beam by combinations of higher-order Hermite- or Laguerre-Gaussian terms. Here, we present an algorithm called Beamfit to estimate the mode composition from a series of CCD images taken over the Rayleigh range of a laser beam. The al…
▽ More
Wavefront errors are a common artifact in laser light generation and imaging. They can be described as an aberration from the spherical wavefront of an ideal Gaussian beam by combinations of higher-order Hermite- or Laguerre-Gaussian terms. Here, we present an algorithm called Beamfit to estimate the mode composition from a series of CCD images taken over the Rayleigh range of a laser beam. The algorithm uses a user-defined set of Hermite- or Laguerre-Gaussian modes as the basis of its theoretical model. A novel method reduces the number of calculations needed to compute the model's intensity profiles. For a given model containing $N$ modes, the number of Hermite-Gaussian complex amplitudes needed to calculate are reduced from orders of $\mathcal{O}(N^2)$ to $\mathcal{O}(N)$ and replaced by simple multiplications. Additionally, non-beam parameters are pre-calculated to further reduce the search space dimension and its resulting calculation time. It is planned to release the Beamfit software to the public under an open-source license.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Method comparison for simulating non-Gaussian Beams and Diffraction for Precision Interferometry
Authors:
Mengyuan Zhao,
Yazheng Tao,
Kevin Weber,
Tim Haase,
Sönke Schuster,
Zhenxiang Hao,
Gudrun Wanner
Abstract:
In the context of simulating precision laser interferometers, we compare via several examples two wavefront decomposition methods: the Mode Expansion Method (MEM) and the Gaussian beam decomposition (GBD) for their precision and applicability. To judge the performance of these methods, we define different types of errors and study their properties. We specify how the two methods can be fairly comp…
▽ More
In the context of simulating precision laser interferometers, we compare via several examples two wavefront decomposition methods: the Mode Expansion Method (MEM) and the Gaussian beam decomposition (GBD) for their precision and applicability. To judge the performance of these methods, we define different types of errors and study their properties. We specify how the two methods can be fairly compared and based on that, the quality of the MEM and GBD are compared in several examples. We test here cases for which analytic results are available, i.e., non-clipped circular and general astigmatic Gaussian beams, as well as clipped circular Gaussian beams, in the near-, far-, and extreme far-field of millions of kilometers occurring in space-gravitational wave detectors. Additionally, we compare the methods for aberrated wavefronts and the interaction with optical components by testing reflections from differently curved mirrors. We find that both methods can be generally used for decomposing non-Gaussian beams. However, which method is more accurate depends on the optical system and simulation settings. In the given examples, the MEM more accurately describes non-clipped Gaussian beams, while for clipped Gaussian beams and the interaction with surfaces, the GBD is more precise.
△ Less
Submitted 16 June, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
Spot size estimation of flat-top beams in space-based gravitational wave detectors
Authors:
Zhen-Xiang Hao,
Tim Haase,
Hong-Bo **,
Ya-Zheng Tao,
Gudrun Wanner,
Ruo-Xi Wu,
Yue-Liang Wu
Abstract:
Motivated by the necessity of a high-quality stray light control in the detection of the gravitational waves in space, the spot size of a flat top beam generated by the clip** of the Gaussian beam (GB) is studied. By adopting the mode expansion method (MEM) approach to simulating the beam, a slight variant of the definition of the mean square deviation (MSD) spot size for the MEM beam is propose…
▽ More
Motivated by the necessity of a high-quality stray light control in the detection of the gravitational waves in space, the spot size of a flat top beam generated by the clip** of the Gaussian beam (GB) is studied. By adopting the mode expansion method (MEM) approach to simulating the beam, a slight variant of the definition of the mean square deviation (MSD) spot size for the MEM beam is proposed. This enables us to quickly estimate the spot size for arbitrary propagation distances. Given that the degree of clip** is dependent on the power ratio within the surface of an optical element, the power ratio within the MSD spot range is used as a measure of spot size. The definition is then validated in the cases of simple astigmatic Gaussian beam and nearly-Gaussian beam profiles. As a representative example, the MSD spot size for a top-hat beam in a science interferometer in the detection of gravitational waves in space is then simulated. As in traditional MSD spot size analysis, the spot size is divergent when diffraction is taken into account. A careful error analysis is carried out on the divergence and in the present context, it is argued that this error will have little effect on our estimation. Using the results of our study allows an optimal design of optical systems with top-hat or other types of non-Gaussian beams. Furthermore, it allows testing the interferometry of space-based gravitational wave detectors for beam clip** in optical simulations. The present work will serve as a useful guide in the future system design of the optical bench and the sizes of the optical components.
△ Less
Submitted 26 October, 2022; v1 submitted 2 October, 2022;
originally announced October 2022.
-
Non-geometric tilt-to-length coupling in precision interferometry: mechanisms and analytical descriptions
Authors:
Marie-Sophie Hartig,
Sönke Schuster,
Gerhard Heinzel,
Gudrun Wanner
Abstract:
This paper is the second in a set of two investigating tilt-to-length (TTL) coupling. TTL describes the cross-coupling of angular or translational jitter into an interferometric phase signal and is an important noise source in precision interferometers, including space gravitational wave detectors like LISA. We discussed in 10.1088/2040-8986/ac675e the TTL coupling effects originating from optical…
▽ More
This paper is the second in a set of two investigating tilt-to-length (TTL) coupling. TTL describes the cross-coupling of angular or translational jitter into an interferometric phase signal and is an important noise source in precision interferometers, including space gravitational wave detectors like LISA. We discussed in 10.1088/2040-8986/ac675e the TTL coupling effects originating from optical path length changes, i.e. geometric TTL coupling. Within this work, we focus on the wavefront and detector geometry dependent TTL coupling, called non-geometric TTL coupling, in the case of two interfering fundamental Gaussian beams. We characterise the coupling originating from the properties of the interfering beams, i.e. their absolute and relative angle at the detector, their relative offset and the individual beam parameters. Furthermore, we discuss the dependency of the TTL coupling on the geometry of the detecting photodiode. Wherever possible, we provide analytical expressions for the expected TTL coupling effects. We investigate the non-geometric coupling effects originating from beam walk due to the angular or translational jitter of a mirror or a receiving system. These effects are directly compared with the corresponding detected optical path length changes in 10.1088/2040-8986/ac675e. Both together provide the total interferometric readout. We discuss in which cases the geometric and non-geometric TTL effects cancel one-another. Additionally, we list linear TTL contributions that can be used to counteract other TTL effects. Altogether, our results provide key knowledge to minimise the total TTL coupling noise in experiments by design or realignment.
△ Less
Submitted 4 January, 2023; v1 submitted 13 July, 2022;
originally announced July 2022.
-
Geometric tilt-to-length coupling in precision interferometry: mechanisms and analytical descriptions
Authors:
Marie-Sophie Hartig,
Sönke Schuster,
Gudrun Wanner
Abstract:
Tilt-to-length coupling is a technical term for the cross-coupling of angular or lateral jitter into an interferometric phase signal. It is an important noise source in precision interferometers and originates either from changes in the optical path lengths or from wavefront and clip** effects. Within this paper, we focus on geometric TTL coupling and categorize it into a number of different mec…
▽ More
Tilt-to-length coupling is a technical term for the cross-coupling of angular or lateral jitter into an interferometric phase signal. It is an important noise source in precision interferometers and originates either from changes in the optical path lengths or from wavefront and clip** effects. Within this paper, we focus on geometric TTL coupling and categorize it into a number of different mechanisms for which we give analytic expressions. We then show that this geometric description is not always sufficient to predict the TTL coupling noise within an interferometer. We, therefore, discuss how understanding the geometric effects allows TTL noise reduction already by smart design choices. Additionally, they can be used to counteract the total measured TTL noise in a system. The presented content applies to a large variety of precision interferometers, including space gravitational wave detectors like LISA.
△ Less
Submitted 15 March, 2022; v1 submitted 7 January, 2022;
originally announced January 2022.
-
Optical suppression of tilt-to-length coupling in the LISA long-arm interferometer
Authors:
M Chwalla,
K Danzmann,
M Dovale Álvarez,
J J Esteban Delgado,
G Fernández Barranco,
E Fitzsimons,
O Gerberding,
G Heinzel,
C J Killow,
M Lieser,
M Perreur-Lloyd,
D I Robertson,
J M Rohr,
S Schuster,
T S Schwarze,
M Tröbs,
G Wanner,
H Ward
Abstract:
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultr…
▽ More
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultra-stable interferometer testbed has been developed in order to investigate this issue and validate mitigation strategies in a setup representative of LISA, and in this paper it is operated in the long-arm interferometer configuration. The testbed is fitted with a flat-top beam generator to simulate the beam received by a LISA spacecraft. We demonstrate a reduction of TTL coupling between this flat-top beam and a Gaussian reference beam via introducing two- and four-lens imaging systems. TTL coupling factors below $\pm 25\,μ$m/rad for beam tilts within $\pm 300\,μ$rad are obtained by careful optimization of the system. Moreover we show that the additional TTL coupling due to lateral alignment errors of elements of the imaging system can be compensated by introducing lateral shifts of the detector, and vice versa. These findings help validate the suitability of this noise-reduction technique for the LISA long-arm interferometer.
△ Less
Submitted 5 June, 2020; v1 submitted 13 February, 2020;
originally announced February 2020.
-
LISA Pathfinder Performance Confirmed in an Open-Loop Configuration: Results from the Free-Fall Actuation Mode
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (53 additional authors not shown)
Abstract:
We report on the results of the LISA Pathfinder (LPF) free-fall mode experiment, in which the control force needed to compensate the quasistatic differential force acting on two test masses is applied intermittently as a series of "impulse" forces lasting a few seconds and separated by roughly 350 s periods of true free fall. This represents an alternative to the normal LPF mode of operation in wh…
▽ More
We report on the results of the LISA Pathfinder (LPF) free-fall mode experiment, in which the control force needed to compensate the quasistatic differential force acting on two test masses is applied intermittently as a series of "impulse" forces lasting a few seconds and separated by roughly 350 s periods of true free fall. This represents an alternative to the normal LPF mode of operation in which this balancing force is applied continuously, with the advantage that the acceleration noise during free fall is measured in the absence of the actuation force, thus eliminating associated noise and force calibration errors. The differential acceleration noise measurement presented here with the free-fall mode agrees with noise measured with the continuous actuation scheme, representing an important and independent confirmation of the LPF result. An additional measurement with larger actuation forces also shows that the technique can be used to eliminate actuation noise when this is a dominant factor.
△ Less
Submitted 30 August, 2019;
originally announced August 2019.
-
Forbush decreases and $<$ 2-day GCR flux non-recurrent variations studied with LISA Pathfinder
Authors:
C. Grimani,
M. Armano,
H. Audley,
J. Baird,
S. Benella,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
M. Fabi,
L. Ferraioli,
V. Ferroni,
N. Finetti,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert
, et al. (60 additional authors not shown)
Abstract:
Non-recurrent short term variations of the galactic cosmic-ray (GCR) flux above 70 MeV n$^{-1}$ were observed between 2016 February 18 and 2017 July 3 aboard the European Space Agency LISA Pathfinder (LPF) mission orbiting around the Lagrange point L1 at 1.5$\times$10$^6$ km from Earth. The energy dependence of three Forbush decreases (FDs) is studied and reported here. A comparison of these obser…
▽ More
Non-recurrent short term variations of the galactic cosmic-ray (GCR) flux above 70 MeV n$^{-1}$ were observed between 2016 February 18 and 2017 July 3 aboard the European Space Agency LISA Pathfinder (LPF) mission orbiting around the Lagrange point L1 at 1.5$\times$10$^6$ km from Earth. The energy dependence of three Forbush decreases (FDs) is studied and reported here. A comparison of these observations with others carried out in space down to the energy of a few tens of MeV n$^{-1}$ shows that the same GCR flux parameterization applies to events of different intensity during the main phase. FD observations in L1 with LPF and geomagnetic storm occurrence is also presented. Finally, the characteristics of GCR flux non-recurrent variations (peaks and depressions) of duration $<$ 2 days and their association with interplanetary structures are investigated. It is found that, most likely, plasma compression regions between subsequent corotating high-speed streams cause peaks, while heliospheric current sheet crossing cause the majority of the depressions.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Precision Charge Control for Isolated Free-Falling Test Masses: LISA Pathfinder Results
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
D. Giardini,
F. Gibert,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (60 additional authors not shown)
Abstract:
The LISA Pathfinder charge management device was responsible for neutralising the cosmic ray induced electric charge that inevitably accumulated on the free-falling test masses at the heart of the experiment. We present measurements made on ground and in-flight that quantify the performance of this contactless discharge system which was based on photo-emission under UV illumination. In addition, a…
▽ More
The LISA Pathfinder charge management device was responsible for neutralising the cosmic ray induced electric charge that inevitably accumulated on the free-falling test masses at the heart of the experiment. We present measurements made on ground and in-flight that quantify the performance of this contactless discharge system which was based on photo-emission under UV illumination. In addition, a two-part simulation is described that was developed alongside the hardware. Modelling of the absorbed UV light within the Pathfinder sensor was carried out with the GEANT4 software toolkit and a separate MATLAB charge transfer model calculated the net photocurrent between the test masses and surrounding housing in the presence of AC and DC electric fields. We confront the results of these models with observations and draw conclusions for the design of discharge systems for future experiments like LISA that will also employ free-falling test masses.
△ Less
Submitted 17 September, 2018; v1 submitted 6 July, 2018;
originally announced July 2018.
-
Characteristics and energy dependence of recurrent galactic cosmic-ray flux depressions and of a Forbush decrease with LISA Pathfinder
Authors:
M. Armano,
H. Audley,
J. Baird,
M. Bassan,
S. Benella,
P. Binetruy,
M. Born,
D. Bortoluzzi,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
M. Fabi,
L. Ferraioli,
V. Ferroni,
N. Finetti,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini
, et al. (60 additional authors not shown)
Abstract:
Galactic cosmic-ray (GCR) energy spectra observed in the inner heliosphere are modulated by the solar activity, the solar polarity and structures of solar and interplanetary origin. A high counting rate particle detector (PD) aboard LISA Pathfinder (LPF), meant for subsystems diagnostics, was devoted to the measurement of galactic cosmic-ray and solar energetic particle integral fluxes above 70 Me…
▽ More
Galactic cosmic-ray (GCR) energy spectra observed in the inner heliosphere are modulated by the solar activity, the solar polarity and structures of solar and interplanetary origin. A high counting rate particle detector (PD) aboard LISA Pathfinder (LPF), meant for subsystems diagnostics, was devoted to the measurement of galactic cosmic-ray and solar energetic particle integral fluxes above 70 MeV n$^{-1}$ up to 6500 counts s$^{-1}$. PD data were gathered with a sampling time of 15 s. Characteristics and energy-dependence of GCR flux recurrent depressions and of a Forbush decrease dated August 2, 2016 are reported here. The capability of interplanetary missions, carrying PDs for instrument performance purposes, in monitoring the passage of interplanetary coronal mass ejections (ICMEs) is also discussed.
△ Less
Submitted 27 April, 2018; v1 submitted 23 February, 2018;
originally announced February 2018.
-
Reducing tilt-to-length coupling for the LISA test mass interferometer
Authors:
M Tröbs,
S Schuster,
M Lieser,
M Zwetz,
M Chwalla,
K Danzmann,
G Fernandez Barranco,
E D Fitzsimons,
O Gerberding,
G Heinzel,
C J Killow,
M Perreur-Lloyd,
D I Robertson,
T S Schwarze,
G Wanner,
H Ward
Abstract:
Objects sensed by laser interferometers are usually not stable in position or orientation. This angular instability can lead to a coupling of angular tilt to apparent longitudinal displacement -- tilt-to-length coupling (TTL). In LISA this is a potential noise source for both the test mass interferometer and the long-arm interferometer. We have experimentally investigated TTL coupling in a setup r…
▽ More
Objects sensed by laser interferometers are usually not stable in position or orientation. This angular instability can lead to a coupling of angular tilt to apparent longitudinal displacement -- tilt-to-length coupling (TTL). In LISA this is a potential noise source for both the test mass interferometer and the long-arm interferometer. We have experimentally investigated TTL coupling in a setup representative for the LISA test mass interferometer and used this system to characterise two different imaging systems (a two-lens design and a four-lens design) both designed to minimise TTL coupling. We show that both imaging systems meet the LISA requirement of +-25 um/rad for interfering beams with relative angles of up to +-300 urad. Furthermore, we found a dependency of the TTL coupling on beam properties such as the waist size and location, which we characterised both theoretically and experimentally.
△ Less
Submitted 23 November, 2017;
originally announced November 2017.
-
Vanishing tilt-to-length coupling for a singular case in two-beam laser interferometers with Gaussian beams
Authors:
Sönke Schuster,
Gudrun Wanner,
Michael Tröbs,
Gerhard Heinzel
Abstract:
The omnipresent tilt-to-length coupling in two-beam laser interferometers, frequently a nuisance in precision measurements, vanishes for the singular case of two beams with identical parameters and complete detection of both beams without clip**. This effect has been observed numerically and is explained in this manuscript by the cancellation of two very different effects of equal magnitude and…
▽ More
The omnipresent tilt-to-length coupling in two-beam laser interferometers, frequently a nuisance in precision measurements, vanishes for the singular case of two beams with identical parameters and complete detection of both beams without clip**. This effect has been observed numerically and is explained in this manuscript by the cancellation of two very different effects of equal magnitude and opposite sign.
This paper was published in Applied Optics and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: [http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-54-5-1010]. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.
△ Less
Submitted 2 February, 2015; v1 submitted 20 June, 2014;
originally announced June 2014.
-
Analytical description of interference between two misaligned and mismatched complete Gaussian beams
Authors:
Gudrun Wanner,
Gerhard Heinzel
Abstract:
A typical application for laser interferometers is a precision measurement of length changes that result in interferometric phase shifts. Such phase changes are typically predicted numerically, due to the com- plexity of the overlap integral that needs to be solved. In this paper we will derive analytical representations of the interferometric phase and contrast (aka. fringe visibility) for two be…
▽ More
A typical application for laser interferometers is a precision measurement of length changes that result in interferometric phase shifts. Such phase changes are typically predicted numerically, due to the com- plexity of the overlap integral that needs to be solved. In this paper we will derive analytical representations of the interferometric phase and contrast (aka. fringe visibility) for two beam interferometers, both homodyne and heterodyne. The fundamental Gaussian beams can be arbitrarily misaligned and mismatched to each other. A limitation of the analytical result is that both beams must be detected completely, which can experimentally be realized by a sufficiently large single-element photodetector.
△ Less
Submitted 20 February, 2014;
originally announced February 2014.
-
State space modelling and data analysis exercises in LISA Pathfinder
Authors:
M Nofrarias,
F Antonucci,
M Armano,
H Audley,
G Auger,
M Benedetti,
P Binetruy,
J Bogenstahl,
D Bortoluzzi,
N Brandt,
M Caleno,
A Cavalleri,
G Congedo,
M Cruise,
K Danzmann,
F De Marchi,
M Diaz-Aguilo,
I Diepholz,
G Dixon,
R Dolesi,
N Dunbar,
J Fauste,
L Ferraioli,
V Ferroni W Fichter,
E Fitzsimons
, et al. (61 additional authors not shown)
Abstract:
LISA Pathfinder is a mission planned by the European Space Agency to test the key technologies that will allow the detection of gravitational waves in space. The instrument on-board, the LISA Technology package, will undergo an exhaustive campaign of calibrations and noise characterisation campaigns in order to fully describe the noise model. Data analysis plays an important role in the mission an…
▽ More
LISA Pathfinder is a mission planned by the European Space Agency to test the key technologies that will allow the detection of gravitational waves in space. The instrument on-board, the LISA Technology package, will undergo an exhaustive campaign of calibrations and noise characterisation campaigns in order to fully describe the noise model. Data analysis plays an important role in the mission and for that reason the data analysis team has been develo** a toolbox which contains all the functionalities required during operations. In this contribution we give an overview of recent activities, focusing on the improvements in the modelling of the instrument and in the data analysis campaigns performed both with real and simulated data.
△ Less
Submitted 21 June, 2013; v1 submitted 19 June, 2013;
originally announced June 2013.
-
Subtraction of test mass angular noise in the LISA Technology Package interferometer
Authors:
Felipe Guzmán Cervantes,
Frank Steier,
Gudrun Wanner,
Gerhard Heinzel,
Karsten Danzmann
Abstract:
We present recent sensitivity measurements of the LISA Technology Package interferometer with articulated mirrors as test masses, actuated by piezo-electric transducers. The required longitudinal displacement resolution of 9 pm/sqrt[Hz] above 3 mHz has been demonstrated with an angular noise that corresponds to the expected in on-orbit operation. The excess noise contribution of this test mass jit…
▽ More
We present recent sensitivity measurements of the LISA Technology Package interferometer with articulated mirrors as test masses, actuated by piezo-electric transducers. The required longitudinal displacement resolution of 9 pm/sqrt[Hz] above 3 mHz has been demonstrated with an angular noise that corresponds to the expected in on-orbit operation. The excess noise contribution of this test mass jitter onto the sensitive displacement readout was completely subtracted by fitting the angular interferometric data streams to the longitudinal displacement measurement. Thus, this cross-coupling constitutes no limitation to the required performance of the LISA Technology Package interferometry.
△ Less
Submitted 20 March, 2012;
originally announced March 2012.