Showing 1–50 of 170 results for author: Wang, N

Enhancing interfacial thermal transport by nanostructures: Monte Carlo simulations with ab initio phonon properties

Authors: Wenzhu Luo, Neng Wang, Wenlei Lian, Ershuai Yin, Qiang Li

Abstract: Recent experiments have indicated that employing nanostructures can enhance interfacial heat transport, but the mechanism by which different structural morphologies and dimensions contribute to the full-spectrum phonon interfacial transport remains unclear. In this paper, a multiscale method to study the thermal transfer at nanostructured interfaces is developed by combining density functional cal… ▽ More Recent experiments have indicated that employing nanostructures can enhance interfacial heat transport, but the mechanism by which different structural morphologies and dimensions contribute to the full-spectrum phonon interfacial transport remains unclear. In this paper, a multiscale method to study the thermal transfer at nanostructured interfaces is developed by combining density functional calculation, Monte Carlo simulation, and diffuse mismatch method. The changes in the transport paths and contributions to thermal conductance of different frequency phonons caused by changes in nanostructure morphology and size are investigated. The results show that, compared to the triangular and trapezoidal nanostructures, the rectangular nanostructures are more beneficial in enhancing the probability of the reflected phonons encountering the interface, and thus the phonon interfacial transmittance. The nanostructure makes the interfacial heat flow extremely heterogeneous, with significant transverse heat flow occurring at the sidewalls, resulting in a new thermal conduction pathway. The phenomena of multiple reflections and double transmission together lead to the existence of the optimal dimension that maximizes the nanostructures enhancement effect on interfacial heat transfer. The optimal nanostructure width is 100 nm when the height is 100 nm and the maximum interfacial thermal conductance enhancement ratio is 1.31. These results can guide the design of heat transfer enhancement structures at the interface of the actual high-power chips. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: 18 pages, 9 figures

ACM Class: J.2.7

Foundry compatible, efficient wafer-scale manufacturing of ultra-low loss, high-density Si$_3$N$_4$ photonic integrated circuits

Authors: Xinru Ji, Rui Ning Wang, Yang Liu, Johann Riemensberger, Zheru Qiu, Tobias J. Kippenberg

Abstract: Silicon nitride (Si$_3$N$_4$) photonic integrated circuits (PICs) have shown low linear loss, negligible nonlinear loss, and high power handling over traditional silicon photonics. To achieve high-density photonic integration and high effective nonlinearity through tight optical confinement, thick stoichiometric Si$_3$N$_4$ films are indispensable. However, when using low-pressure chemical vapor d… ▽ More Silicon nitride (Si$_3$N$_4$) photonic integrated circuits (PICs) have shown low linear loss, negligible nonlinear loss, and high power handling over traditional silicon photonics. To achieve high-density photonic integration and high effective nonlinearity through tight optical confinement, thick stoichiometric Si$_3$N$_4$ films are indispensable. However, when using low-pressure chemical vapor deposition (LPCVD) to achieve high optical material transparency, Si$_3$N$_4$ films exhibit large tensile stress on the order of GPa. Methods for crack prevention are therefore essential. The photonic Damascene process has addressed this issue, attaining record low loss Si$_3$N$_4$ PICs, but it lacks control of the waveguide height. Conversely, precise waveguide dimension and ultra-low loss have been achieved with subtractive processing, but this method is not compatible with mass production due to the use of electron beam lithography. To date, an outstanding challenge is to attain both lithographic precision and ultra-low loss in high confinement Si$_3$N$_4$ PICs that are compatible with large-scale foundry manufacturing. Here, we present a single-step deposited, DUV-based subtractive method for producing wafer-scale ultra-low loss Si$_3$N$_4$ PICs that harmonize these necessities. By employing deep etching of densely distributed, interconnected trenches into the substrate, we effectively mitigate the tensile stress in the Si$_3$N$_4$ layer, enabling direct deposition of thick films without cracking and substantially prolonged storage duration. Lastly, we identify ultraviolet (UV) radiation-induced damage that can be remedied through rapid thermal annealing. Collectively, we develop ultra-low loss Si$_3$N$_4$ microresonators and 0.5 m-long spiral waveguides with losses down to 1.4 dB/m at 1550 nm with high production yield. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 2023 Conference on Lasers and Electro-Optics (CLEO). IEEE, 2023

Evolution of the autoresonant plasma wave excitation in two-dimensional particle-in-cell simulations

Authors: Mufei. Luo, Caterina. Riconda, Anna. Grassi, Ning. Wang, Jonathan S. Wurtele, Tünde Fülöp, István Pusztai

Abstract: The generation of an autoresonantly phase-locked high amplitude plasma waves to the chirped beat frequency of two driving lasers is studied in two dimensions using particle-in-cell simulations. The two-dimensional plasma and laser parameters correspond to those that optimized the plasma wave amplitude in one-dimensional simulations. Near the start of autoresonant locking, the two-dimensional simul… ▽ More The generation of an autoresonantly phase-locked high amplitude plasma waves to the chirped beat frequency of two driving lasers is studied in two dimensions using particle-in-cell simulations. The two-dimensional plasma and laser parameters correspond to those that optimized the plasma wave amplitude in one-dimensional simulations. Near the start of autoresonant locking, the two-dimensional simulations appear similar to one-dimensional particle-in-cell results [Luo et al., Phys. Rev. Res. 6, 013338 (2024)] with plasma wave amplitudes above the Rosenbluth-Liu limit. Later, just below wave-breaking, the two-dimensional simulation exhibits a Weibel-like instability and eventually laser beam filamentation. These limit the coherence of the plasma oscillation after the peak plasma wave field is obtained. In spite of the reduction of spatial coherence of the accelerating density structure, the acceleration of self-injected electrons in the case studied remains at $70\%$ to $80\%$ of that observed in one dimension. Other effects such as plasma wave bowing are discussed. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Comments: 23 pages, 13 figures

Measures to mitigate the coherent beam-beam instability at CEPC

Authors: Yuan Zhang, Na Wang, Chuntao Lin, Kazuhito Ohmi, Liwei Pan

Abstract: Both horizontal and vertical coherent beam-beam instability are important issues at CEPC. The horizontal instability (X-Z instability) could be induced by beam-beam itself. In this paper we try to study the effect of chromaticity and resistive feedback by analysis and simulation. The vertical instability may be induced due to the combined effect of beam-beam interaction and vacuum impedance. Finit… ▽ More Both horizontal and vertical coherent beam-beam instability are important issues at CEPC. The horizontal instability (X-Z instability) could be induced by beam-beam itself. In this paper we try to study the effect of chromaticity and resistive feedback by analysis and simulation. The vertical instability may be induced due to the combined effect of beam-beam interaction and vacuum impedance. Finite chromaticity and asymmetrical tunes have been proposed to suppress the vertical instability. Due to the further increase of impedance budget, we need to find more measures to mitigate the instability. The effect of resistive feedback and hourglass effect are evaluated by simulation. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 4 pages, 5 figures, IPAC24 WECD2

Simulating unsteady fluid flows on a superconducting quantum processor

Authors: Zhaoyuan Meng, Jiarun Zhong, Shibo Xu, Ke Wang, Jiachen Chen, Feitong **, Xuhao Zhu, Yu Gao, Yaozu Wu, Chuanyu Zhang, Ning Wang, Yiren Zou, Aosai Zhang, Zhengyi Cui, Fanhao Shen, Zehang Bao, Zitian Zhu, Ziqi Tan, Tingting Li, Pengfei Zhang, Shiying Xiong, Hekang Li, Qiujiang Guo, Zhen Wang, Chao Song , et al. (2 additional authors not shown)

Abstract: Recent advancements of intermediate-scale quantum processors have triggered tremendous interest in the exploration of practical quantum advantage. The simulation of fluid dynamics, a highly challenging problem in classical physics but vital for practical applications, emerges as a good candidate for showing quantum utility. Here, we report an experiment on the digital simulation of unsteady flows,… ▽ More Recent advancements of intermediate-scale quantum processors have triggered tremendous interest in the exploration of practical quantum advantage. The simulation of fluid dynamics, a highly challenging problem in classical physics but vital for practical applications, emerges as a good candidate for showing quantum utility. Here, we report an experiment on the digital simulation of unsteady flows, which consists of quantum encoding, evolution, and detection of flow states, with a superconducting quantum processor. The quantum algorithm is based on the Hamiltonian simulation using the hydrodynamic formulation of the Schrödinger equation. With the median fidelities of 99.97% and 99.67% for parallel single- and two-qubit gates respectively, we simulate the dynamics of a two-dimensional (2D) compressible diverging flow and a 2D decaying vortex with ten qubits. The experimental results well capture the temporal evolution of averaged density and momentum profiles, and qualitatively reproduce spatial flow fields with moderate noises. This work demonstrates the potential of quantum computing in simulating more complex flows, such as turbulence, for practical applications. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Large-scale photonic chip based pulse interleaver for low-noise microwave generation

Authors: Zheru Qiu, Neetesh Singh, Yang Liu, Xinru Ji, Rui Ning Wang, Franz X. Kärtner, Tobias Kippenberg

Abstract: Microwaves generated by optical techniques have demonstrated unprecedentedly low noise and hold significance in various applications such as communication, radar, instrumentation, and metrology. To date, the purest microwave signals are generated using optical frequency division with femtosecond mode-locked lasers. However, many femtosecond laser combs have a radio frequency (RF) repetition rate i… ▽ More Microwaves generated by optical techniques have demonstrated unprecedentedly low noise and hold significance in various applications such as communication, radar, instrumentation, and metrology. To date, the purest microwave signals are generated using optical frequency division with femtosecond mode-locked lasers. However, many femtosecond laser combs have a radio frequency (RF) repetition rate in the hundreds of megahertz range, necessitating methods to translate the generated low-noise RF signal to the microwave domain. Benchtop pulse interleavers can multiply the pulse repetition rate, avoid saturation of photodetectors, and facilitate the generation of high-power low-noise microwave signals, which have to date only been demonstrated using optical fibers or free space optics. Here, we introduce a large-scale photonic integrated circuit-based interleaver, offering size reduction and enhanced stability. The all-on-chip interleaver attains a 64-fold multiplication of the repetition rate, directly translated from 216 MHz to 14 GHz in microwave Ku-Band. By overcoming photodetector saturation, the generated microwave power was improved by 36 dB, with a phase noise floor reduced by more than 10 folds to -160 dBc/Hz on the 14 GHz carrier. The device is based on a low-loss and high-density photonic integrated circuit fabricated by the photonic Damascene process. Six cascaded stages of Mach-Zehnder interferometers with optical delay lines up to 33 centimeters long are fully integrated into a compact footprint of 8.5 mmx1.7 mm. The lithographically defined precision of the optical waveguide path length enables the scaling up of the interleaved frequency to millimeter-wave bands, which is challenging the fiber-based counterparts. This interleaver has the potential to reduce the cost and footprint of mode-locked-laser-based microwave generation, allowing for field deployment. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Adaptive Anomaly Detection Disruption Prediction Starting from First Discharge on Tokamak

Authors: Xinkun Ai, Wei Zheng, Ming Zhang, Yonghua Ding, Dalong Chen, Zhongyong Chen, Bihao Guo, Chengshuo Shen, Nengchao Wang, Zhoujun Yang, Zhipeng Chen, Yuan Pan, Biao Shen, Binjia Xiao

Abstract: Plasma disruption presents a significant challenge in tokamak fusion, where it can cause severe damage and economic losses. Current disruption predictors mainly rely on data-driven methods, requiring extensive discharge data for training. However, future tokamaks require disruption prediction from the first shot, posing challenges of data scarcity during the early operation period. In this period… ▽ More Plasma disruption presents a significant challenge in tokamak fusion, where it can cause severe damage and economic losses. Current disruption predictors mainly rely on data-driven methods, requiring extensive discharge data for training. However, future tokamaks require disruption prediction from the first shot, posing challenges of data scarcity during the early operation period. In this period disruption prediction aims to support safe exploration of operation range and accumulate necessary data to develop advanced prediction models. Thus, predictors must adapt to evolving plasma environments during this exploration phase. To address these issues, this study proposes a cross-tokamak adaptive deployment method using the Enhanced Convolutional Autoencoder Anomaly Detection (E-CAAD) predictor, enabling disruption prediction from the first shot of new devices. Experimental results indicate the ability of E-CAAD model trained on existing devices to effectively differentiate between disruption precursors and non-disruption samples on new devices, proving the feasibility of model cross-device transfer. Building upon this, adaptive learning from scratch and threshold adaptive adjustment strategies are proposed to achieve model cross-device transfer. The adaptive learning from scratch strategy enables the predictor to use scarce data during the early operation of the new device while rapidly adapting to changes in operation environment. The threshold adaptive adjustment strategy addresses the challenge of selecting warning thresholds on new devices where validation set is lacking, ensuring that the warning thresholds adapt to changes in the operation environment. Finally, experiments transferring the model from J-TEXT to EAST exhibit comparable performance to EAST models trained with ample data, achieving a TPR of 85.88% and a FPR of 6.15%, with a 20ms reserved MGI system reaction time. △ Less

Submitted 26 June, 2024; v1 submitted 12 April, 2024; originally announced April 2024.

Comments: 18 pages, 7 figures

Wall confinement effects on the dynamics of cavitation bubbles in thin tubes

Authors: Nian Wang, Huashi Xu, Tianyou Wang, Zhizhao Che

Abstract: Cavitation is a common phenomenon in nature and has numerous applications. In contrast to a cavitation bubble in a free domain, a cavitation bubble in a thin tube is restricted by the tube wall, which is expected to significantly affect bubble evolution but its mechanism is still unclear. In this study, the dynamics of a cavitation bubble in a thin circular tube is studied by numerical simulation,… ▽ More Cavitation is a common phenomenon in nature and has numerous applications. In contrast to a cavitation bubble in a free domain, a cavitation bubble in a thin tube is restricted by the tube wall, which is expected to significantly affect bubble evolution but its mechanism is still unclear. In this study, the dynamics of a cavitation bubble in a thin circular tube is studied by numerical simulation, focusing on the confinement effects of the tube. The results show that besides affecting the size and lifetime of the bubble, the confinement effects of the tube lead to the generation of counter jets and a ring jet during the contraction process of the bubble, and the curvature of the two counter jets determines the ring jet's peak velocity. When the bubble deviates from the midpoint of the tube in the axial direction, the two sides of the bubble along the axial direction show asymmetric behaviors, which results in the bubble migrating toward the midpoint. The tube diameter, tube length, liquid viscosity, and initial bubble position, can significantly influence the degree of confinement effects, which can be characterized by the variations of several key indicators, such as bubble size, lifetime, degree of deformation, counter jet velocity, ring jet velocity, and axial migration of the bubble. △ Less

Submitted 16 March, 2024; originally announced March 2024.

Comments: 15 pages, 13 figures

Unifying frequency metrology across microwave, optical, and free-electron domains

Authors: Yujia Yang, Paolo Cattaneo, Arslan S. Raja, Bruce Weaver, Rui Ning Wang, Alexey Sapozhnik, Fabrizio Carbone, Thomas LaGrange, Tobias J. Kippenberg

Abstract: Frequency metrology lies at the heart of precision measurement. Optical frequency combs provide a coherent link uniting the microwave and optical domains in the electromagnetic spectrum, with profound implications in timekee**, sensing and spectroscopy, fundamental physics tests, exoplanet search, and light detection and ranging. Here, we extend this frequency link to free electrons by coherent… ▽ More Frequency metrology lies at the heart of precision measurement. Optical frequency combs provide a coherent link uniting the microwave and optical domains in the electromagnetic spectrum, with profound implications in timekee**, sensing and spectroscopy, fundamental physics tests, exoplanet search, and light detection and ranging. Here, we extend this frequency link to free electrons by coherent modulation of the electron phase by a continuous-wave laser locked to a fully stabilized optical frequency comb. Microwave frequency standards are transferred to the optical domain via the frequency comb, and are further imprinted in the electron spectrum by optically modulating the electron phase with a photonic chip-based microresonator. As a proof-of-concept demonstration, we apply this frequency link in the calibration of an electron spectrometer, and use the electron spectrum to measure the optical frequency. Our work bridges frequency domains differed by a factor of $\sim10^{13}$ and carried by different physical objects, establishes a spectroscopic connection between electromagnetic waves and free-electron matter waves, and has direct ramifications in ultrahigh-precision electron spectroscopy. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Ultra-short lifetime isomer studies from photonuclear reactions using laser-driven ultra-intense γ-ray

Authors: Di Wu, Haoyang Lan, Jiaxing Liu, Huangang Lu, Jianyao Zhang, Jianfeng Lv, Xuezhi Wu, Hui Zhang, Yadong Xia, Qiangyou He, Jie Cai, Qianyi Ma, Yuhui Xia, Zhenan Wang, Meizhi Wang, Zhiyan Yang, Xinlu Xu, Yixing Geng, Chen Lin, Wenjun Ma, Yanying Zhao, Haoran Wang, Fulong Liu, Chuangye He, **qing Yu , et al. (7 additional authors not shown)

Abstract: Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ul… ▽ More Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ultra-intense γ-rays. The fastest time resolution can reach sub-ps level with γ-ray intensities >10^{19}/s ({\geqslant} 8 MeV). The ^{115}In(γ, n)^{114m2}In reaction (T_{1/2} = 43.1 ms) was first measured in the high-energy region which shed light on the nuclear structure studies of In element. Simulations showed it would be an efficient way to study ^{229m}Th (T_{1/2} = 7 μs), which is believed to be the next generation of nuclear clock. This work offered a unique way of gaining insight into ultra-short lifetimes and promised an effective way to fill the gap in relevant experimental data. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Physics-Informed Convolutional Decoder (PICD): A novel approach for direct inversion of heterogeneous subsurface flow

Authors: Nanzhe Wang, Xiang-Zhao Kong, Dongxiao Zhang

Abstract: In this study, we present the development and application of the physics-informed convolutional decoder (PICD) framework for inverse modeling of heterogenous groundwater flow. PICD stands out as a direct inversion method, eliminating the need for repeated forward model simulations. The framework leverages both data-driven and physics-driven approaches by integrating monitoring data and domain know… ▽ More In this study, we present the development and application of the physics-informed convolutional decoder (PICD) framework for inverse modeling of heterogenous groundwater flow. PICD stands out as a direct inversion method, eliminating the need for repeated forward model simulations. The framework leverages both data-driven and physics-driven approaches by integrating monitoring data and domain knowledge (governing equation, boundary conditions, and initial conditions) into the inversion process. PICD utilizes a convolutional decoder to effectively approximate the spatial distribution of hydraulic heads, while Karhunen Loeve expansion (KLE) is employed to parameterize hydraulic conductivities. During the training process, the stochastic vector in KLE and the parameters of the convolutional decoder are adjusted simultaneously, ensuring that the predictions align with available measurements and adhere to domain-specific knowledge. The final optimized stochastic vectors correspond to the estimation of hydraulic conductivities, and the trained convolutional decoder demonstrates the ability to predict the evolution and distribution of hydraulic heads in heterogeneous fields. To validate the effectiveness of the proposed PICD framework, various scenarios of groundwater flow are examined. Results demonstrate the framework's capability to accurately estimate heterogeneous hydraulic conductivities and to deliver satisfactory predictions of hydraulic heads, even with sparse measurements. The proposed PICD framework emerges as a promising tool for efficient and informed groundwater flow inverse modeling. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Comments: 29 pages, 7 figures

Upside down Rayleigh-Marchenko: a practical, yet exact redatuming scheme for seabed seismic acquisitions

Authors: Ning Wang, Matteo Ravasi

Abstract: Ocean-bottom seismic plays a crucial role in resource exploration and monitoring. However, despite its undoubted potential, the use of coarse receiver geometries poses challenges to accurate wavefield redatuming. This in turn, affects the quality of subsequent imaging and reservoir charactherization products. We propose a reciprocal version of the Rayleigh-Marchenko method, called upside down Rayl… ▽ More Ocean-bottom seismic plays a crucial role in resource exploration and monitoring. However, despite its undoubted potential, the use of coarse receiver geometries poses challenges to accurate wavefield redatuming. This in turn, affects the quality of subsequent imaging and reservoir charactherization products. We propose a reciprocal version of the Rayleigh-Marchenko method, called upside down Rayleigh-Marchenko, where all spatial integrals are performed over the (usually much better-sampled) source carpet; this results in a theoretically exact redatuming scheme, which can handle irregular and sparse receiver geometries. The proposed method requires availability of multi-component receivers and either dual-sensor sources or a pre-processing step of model-based source deghosting, and utilizes only the down-going component of the receiver-side wavefield; as such, it can be interpreted as a full-wavefield extension of the mirror imaging method commonly used in seabed settings. Two synthetic examples are used to showcase the effectiveness of the proposed method, starting from the ideal scenario of finely and regularly sampled sources and receivers, and later considering different levels of decimation for the receiver array. Migrated images as well as common-angle gathers reveal that our method can be used to produce structural and amplitude-friendly imaging outputs with minimal data pre-processing. △ Less

Submitted 11 January, 2024; originally announced January 2024.

High-resolution myelin-water fraction and quantitative relaxation map** using 3D ViSTa-MR fingerprinting

Authors: Congyu Liao, Xiaozhi Cao, Siddharth Srinivasan Iyer, Sophie Schauman, Zihan Zhou, Xiaoqian Yan, Quan Chen, Zhitao Li, Nan Wang, Ting Gong, Zhe Wu, Hongjian He, Jianhui Zhong, Yang Yang, Adam Kerr, Kalanit Grill-Spector, Kawin Setsompop

Abstract: Purpose: This study aims to develop a high-resolution whole-brain multi-parametric quantitative MRI approach for simultaneous map** of myelin-water fraction (MWF), T1, T2, and proton-density (PD), all within a clinically feasible scan time. Methods: We developed 3D ViSTa-MRF, which combined Visualization of Short Transverse relaxation time component (ViSTa) technique with MR Fingerprinting (MR… ▽ More Purpose: This study aims to develop a high-resolution whole-brain multi-parametric quantitative MRI approach for simultaneous map** of myelin-water fraction (MWF), T1, T2, and proton-density (PD), all within a clinically feasible scan time. Methods: We developed 3D ViSTa-MRF, which combined Visualization of Short Transverse relaxation time component (ViSTa) technique with MR Fingerprinting (MRF), to achieve high-fidelity whole-brain MWF and T1/T2/PD map** on a clinical 3T scanner. To achieve fast acquisition and memory-efficient reconstruction, the ViSTa-MRF sequence leverages an optimized 3D tiny-golden-angle-shuffling spiral-projection acquisition and joint spatial-temporal subspace reconstruction with optimized preconditioning algorithm. With the proposed ViSTa-MRF approach, high-fidelity direct MWF map** was achieved without a need for multi-compartment fitting that could introduce bias and/or noise from additional assumptions or priors. Results: The in-vivo results demonstrate the effectiveness of the proposed acquisition and reconstruction framework to provide fast multi-parametric map** with high SNR and good quality. The in-vivo results of 1mm- and 0.66mm-iso datasets indicate that the MWF values measured by the proposed method are consistent with standard ViSTa results that are 30x slower with lower SNR. Furthermore, we applied the proposed method to enable 5-minute whole-brain 1mm-iso assessment of MWF and T1/T2/PD map**s for infant brain development and for post-mortem brain samples. Conclusions: In this work, we have developed a 3D ViSTa-MRF technique that enables the acquisition of whole-brain MWF, quantitative T1, T2, and PD maps at 1mm and 0.66mm isotropic resolution in 5 and 15 minutes, respectively. This advancement allows for quantitative investigations of myelination changes in the brain. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comments: 38 pages, 12 figures and 1 table

Journal ref: Magnetic Resonance in Medicine 2023

Hydrogen-free low-temperature silica for next generation integrated photonics

Authors: Zheru Qiu, Zihan Li, Rui Ning Wang, Xinru Ji, Marta Divall, Anat Siddharth, Tobias J. Kippenberg

Abstract: The advances in novel low-loss "on insulator" integrated photonics platforms beyond silicon, such as thin-film LiNbO3, LiTaO3, GaP and BaTiO3 have demonstrated major potential across a wide range of applications, due to their unique electro-optical or nonlinear optical properties. This has heralded novel devices, ranging from low-voltage and high-speed modulators to parametric amplifiers. For such… ▽ More The advances in novel low-loss "on insulator" integrated photonics platforms beyond silicon, such as thin-film LiNbO3, LiTaO3, GaP and BaTiO3 have demonstrated major potential across a wide range of applications, due to their unique electro-optical or nonlinear optical properties. This has heralded novel devices, ranging from low-voltage and high-speed modulators to parametric amplifiers. For such photonic integrated circuits, a low-loss SiO2 cladding layer is a key element, serving as a passivation layer for the waveguides and enabling efficient fiber-to-chip coupling. However, numerous novel ferroelectric or III-V "on insulator" platforms have low tolerances for process temperature. This prohibits using high-temperature anneals to remove hydrogen, a common impurity that is inherent to ordinary chemical vapor deposited SiO2 and causes significant optical loss in the near infrared. Here, we satisfy the dichotomy of a low-loss wafer scale manufactured SiO2 cladding and low processing temperature. Inspired by the manufacturing of optical fibers, we introduce a hydrogen-free, low-loss SiO2 cladding that is deposited at low temperatures (300 degrees Celsius) by using SiCl4 and O2 as precursors in inductively coupled plasma-enhanced chemical vapor deposition (ICPCVD). By replacing hydrogenous silicon precursors (e.g. SiH4) with SiCl4, the deposited film is inherently free from residual hydrogen. The process temperature is compatible with the "on insulator" platforms and CMOS electronic integrated circuits. We demonstrate a wide low-loss window that covers all telecommunication bands from 1260 nm to 1625 nm. We achieve a < 2.5 dB/m waveguide loss at 1550 nm, comparable with 1200 degree Celsius annealed films. Our SiCl4 process provides a key future cladding for all recently emerged "on-insulator" photonics platforms, that is low cost, scalable in manufacturing, and directly foundry compatible. △ Less

Submitted 26 April, 2024; v1 submitted 12 December, 2023; originally announced December 2023.

Comments: 7 pages, 4 figures

Extraction of n = 0 pick-up by locked mode detectors based on neural networks in J-TEXT

Authors: Chengshuo Shen, Jianchao Li, Yonghua Ding, Jiaolong Dong, Nengchao Wang, Dongliang. Han, Feiyue Mao, Da Li, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yuan Pan, J-Text Team

Abstract: Measurement of locked mode (LM) is important for the physical research of Magnetohydrodynamic (MHD) instabilities and plasma disruption. The n = 0 pick-up need to be extracted and subtracted to calculate the amplitude and phase of the LM. A new method to extract this pick-up has been developed by predicting the n = 0 pick-up brn=0 by the LM detectors based on Neural Networks (NNs) in J-TEXT. An ap… ▽ More Measurement of locked mode (LM) is important for the physical research of Magnetohydrodynamic (MHD) instabilities and plasma disruption. The n = 0 pick-up need to be extracted and subtracted to calculate the amplitude and phase of the LM. A new method to extract this pick-up has been developed by predicting the n = 0 pick-up brn=0 by the LM detectors based on Neural Networks (NNs) in J-TEXT. An approach called Power Multiple Time Scale (PMTS) has been developed with outstanding regressing effect in multiple frequency ranges. Three models have been progressed based on PMTS NNs. PMTS could fit the brn=0 on the LM detectors with little errors both in time domain and frequency domain. The n>0 pick-up brn>0 generated by resonant magnetic perturbations (RMPs) can be obtained after subtracting the extracted brn=0. This new method uses only one LM instead of 4 LM detectors to extract brn=0. Therefore, the distribution of the LM detectors can also be optimized based on this new method. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Comments: 7pages, 10figures

Cross-Tokamak Deployment Study of Plasma Disruption Predictors Based on Convolutional Autoencoder

Authors: Xinkun Ai, Wei Zheng, Ming Zhang, Yonghua Ding, Dalong Chen, Zhongyong Chen, Chengshuo Shen, Bihao Guo, Nengchao Wang, Zhoujun Yang, Zhipeng Chen, Yuan Pan, Biao Shen, Binjia Xiao, J-TEXT team

Abstract: In the initial stages of operation for future tokamak, facing limited data availability, deploying data-driven disruption predictors requires optimal performance with minimal use of new device data. This paper studies the issue of data utilization in data-driven disruption predictor during cross tokamak deployment. Current predictors primarily employ supervised learning methods and require a large… ▽ More In the initial stages of operation for future tokamak, facing limited data availability, deploying data-driven disruption predictors requires optimal performance with minimal use of new device data. This paper studies the issue of data utilization in data-driven disruption predictor during cross tokamak deployment. Current predictors primarily employ supervised learning methods and require a large number of disruption and non-disruption shots for training. However, the scarcity and high cost of obtaining disruption shots for future tokamaks result in imbalanced training datasets, reducing the performance of supervised learning predictors. To solve this problem, we propose the Enhanced Convolutional Autoencoder Anomaly Detection (E-CAAD) predictor. E-CAAD can be only trained by normal samples from non-disruption shots and can also be trained by disruption precursor samples when disruption shots occur. This model not only overcomes the sample imbalance in supervised learning predictors, but also overcomes the inefficient dataset utilization faced by traditional anomaly detection predictors that cannot use disruption precursor samples for training, making it more suitable for the unpredictable datasets of future tokamaks. Compared to traditional anomaly detection predictor, the E-CAAD predictor performs better in disruption prediction and is deployed faster on new devices. Additionally, we explore strategies to accelerate deployment of E-CAAD predictor on the new device by using data from existing devices. Two deployment strategies are presented: mixing data from existing devices and fine-tuning the predictor trained on existing devices. Our comparisons indicate that the data from existing device can accelerate the deployment of predictor on new device. Notably, the fine-tuning strategy yields the fastest deployment on new device among the designed strategies. △ Less

Submitted 4 January, 2024; v1 submitted 17 November, 2023; originally announced November 2023.

Comments: 19 pages, 8 figures

Giant nonlinear optical wave mixing in van der Waals compound MnPSe3

Authors: Li Yue, Chang Liu, Shanshan Han, Hao Hong, Yijun Wang, Qiaomei Liu, Jiajie Qi, Yuan Li, Dong Wu, Kaihui Liu, Enge Wang, Tao Dong, Nanlin Wang

Abstract: Optical nonlinearities, one of the most fascinating properties of two-dimensional (2D) materials, are essential for exploring novel physics in 2D systems and develo** next-generation nonlinear optical applications. While tremendous efforts have been made to discover and optimize second-order nonlinear optical responses in various 2D materials, higher odd-order nonlinear processes, which are in g… ▽ More Optical nonlinearities, one of the most fascinating properties of two-dimensional (2D) materials, are essential for exploring novel physics in 2D systems and develo** next-generation nonlinear optical applications. While tremendous efforts have been made to discover and optimize second-order nonlinear optical responses in various 2D materials, higher odd-order nonlinear processes, which are in general much less efficient than second order ones, have been paid less attention despite their scientific and applicational significance. Here we report giant odd-order nonlinear optical wave mixing in a correlated van der Waals insulator MnPSe3 at room temperature. Illuminated by two near-infrared femtosecond lasers simultaneously, it generates a series of degenerate and non-degenerate four- and six-wave mixing outputs, with conversion efficiencies up to the order of $10^{-4}$ and $10^{-6}$ for the four- and six-wave mixing processes, respectively, far exceeding the efficiencies of several prototypical nonlinear optical materials (GaSe, LiNbO3). This work highlights the intriguing prospect of transition metal phosphorous trichalcogenides for future research of the nonlinear light matter interactions in 2D systems and for potential nonlinear photonic applications. △ Less

Submitted 28 September, 2023; originally announced October 2023.

Comments: 17 pages, 4 figures

Microstructure and structural modulation of lutetium dihydride LuH2 as seen via transmission electron microscopy

Authors: Xiao-** Ma, Ning-Ning Wang, Wen-Tao Wang, **g-Zhe Nie, Wen-Li Gao, Shuai-Shuai Sun, Jun Li, Huan-Fang Tian, Tian-Long Xia, **-Guang Cheng, Jian-Qi Li, Huai-Xin Yang

Abstract: Structural investigations conducted using transmission electron microscopy (TEM) on LuH2 synthesized under atmospheric pressure (AP-LuH2) and nitrogen-doped LuH2 synthesized under high pressure (HP-LuH2) have revealed numerous microstructural phenomena. Both materials show a clear superstructure modulation with wave vector, q^* = 1/4 (2-20), and this modulation can be well interpreted by the displ… ▽ More Structural investigations conducted using transmission electron microscopy (TEM) on LuH2 synthesized under atmospheric pressure (AP-LuH2) and nitrogen-doped LuH2 synthesized under high pressure (HP-LuH2) have revealed numerous microstructural phenomena. Both materials show a clear superstructure modulation with wave vector, q^* = 1/4 (2-20), and this modulation can be well interpreted by the displacements of Lu atoms. Further investigations on the nitrogen-doped HP-LuH2 materials reveal the appearance of high-density antiphase boundaries, in particular, domain walls of a few atomic layer thickness without structural modulation can be observed, suggesting possible interface properties could be detected in this system. In-situ TEM observations of AP-LuH2 suggest that no evident structural phase transition occurs between 94 K and 673 K. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 8 pages, 7 figures

Cross-tokamak Disruption Prediction based on Physics-Guided Feature Extraction and domain adaptation

Authors: Chengshuo Shen, Wei Zheng, Bihao Guo, Yonghua Ding, Dalong Chen, Xinkun Ai, Fengming Xue, Yu Zhong, Nengchao Wang, Biao Shen, Binjia Xiao, Zhongyong Chen, Yuan Pan, J-TEXT team

Abstract: The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extrac… ▽ More The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extract physics-guided features from the diagnostic signals of each tokamak, called physics-guided feature extraction (PGFE). The second step is to align a few data from the future tokamak (target domain) and a large amount of data from existing tokamak (source domain) based on a domain adaptation algorithm called CORrelation ALignment (CORAL). It is the first attempt at applying domain adaptation in the task of disruption prediction. PGFE has been successfully applied in J-TEXT to predict disruption with excellent performance. PGFE can also reduce the data volume requirements due to extracting the less device-specific features, thereby establishing a solid foundation for cross-tokamak disruption prediction. We have further improved CORAL (supervised CORAL, S-CORAL) to enhance its appropriateness in feature alignment for the disruption prediction task. To simulate the existing and future tokamak case, we selected J-TEXT as the existing tokamak and EAST as the future tokamak, which has a large gap in the ranges of plasma parameters. The utilization of the S-CORAL improves the disruption prediction performance on future tokamak. Through interpretable analysis, we discovered that the learned knowledge of the disruption prediction model through this approach exhibits more similarities to the model trained on large data volumes of future tokamak. △ Less

Submitted 1 November, 2023; v1 submitted 11 September, 2023; originally announced September 2023.

Comments: 17 pages, 9 figures

Critical roles of edge turbulent transport in the formation of high-field-side high-density front and density limit disruption in J-TEXT tokamak

Authors: Peng Shi, Yuhan Wang, Li Gao, Hongjuan Sun1, Qinghu Yang, Xin Xu, Chengshuo Shen, Yanqiu Chen, Qinlin Tao, Zhipeng Chen, Haosheng Wu, Lu Wang, Zhongyong Chen, Nengchao Wang, Zhoujun Yang, **gchun Li, Yonghua Ding, Yuan Pan, J-TEXT team

Abstract: This article presents an in-depth study of the sequence of events leading to density limit disruption in J-TEXT tokamak plasmas, with an emphasis on boudary turbulent transport and the high-field-side high-density (HFSHD) front. These phenomena were extensively investigated by using Langmuir probe and Polarimeter-interferometer diagnostics. This article presents an in-depth study of the sequence of events leading to density limit disruption in J-TEXT tokamak plasmas, with an emphasis on boudary turbulent transport and the high-field-side high-density (HFSHD) front. These phenomena were extensively investigated by using Langmuir probe and Polarimeter-interferometer diagnostics. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Nature-inspired three-dimensional surface serration topologies enable silent flight by suppressing airfoil-turbulence interaction noise

Authors: Zixiao Wei, Stanley Wang, Sean Farris, Naga Chennuri, Ning** Wang, Stara Shinsato, Kahraman Demir, Maya Horii, Grace X. Gu

Abstract: As natural predators, owls fly with astonishing stealth due to the sophisticated serrated surface morphology of their feathers that produces advantageous flow characteristics and favorable boundary layer structures. Traditionally, these serrations are tailored for airfoil edges with simple two-dimensional patterns, limiting their effect on overall noise reduction while negotiating tradeoffs in aer… ▽ More As natural predators, owls fly with astonishing stealth due to the sophisticated serrated surface morphology of their feathers that produces advantageous flow characteristics and favorable boundary layer structures. Traditionally, these serrations are tailored for airfoil edges with simple two-dimensional patterns, limiting their effect on overall noise reduction while negotiating tradeoffs in aerodynamic performance. Here, we formulate new design strategies that can mitigate tradeoffs between noise reduction and aerodynamic performance by merging owl feather and cicada insect wing geometries to create a three-dimensional topology that features silent and efficient flight. Aeroacoustics and aerodynamics experimental results show that the application of our hybrid topology yields a reduction in overall sound pressure levels by up to 9.93% and an increase in propulsive efficiency by over 48.14% compared to benchmark designs. Computational fluid dynamics simulations reveal that the three-dimensional, owl-inspired surface serrations can enhance surface vorticity. The produced coherent vortex structures serve to suppress the source strength of dipole and quadrupole pressure sources at various Reynolds numbers, resulting in a universal noise reduction effect. Our work demonstrates how a bioinspired three-dimensional serration topology refines the turbulence-airfoil interaction mode and improves multiple functionalities of an aerodynamic surface to enable quieter and more fuel-efficient, aerial vehicles. △ Less

Submitted 17 August, 2023; originally announced August 2023.

Comments: 33 pages

Bidirectional microwave-optical transduction based on integration of high-overtone bulk acoustic resonators and photonic circuits

Authors: Terence Blésin, Wil Kao, Anat Siddharth, Rui N. Wang, Alaina Attanasio, Hao Tian, Sunil A. Bhave, Tobias J. Kippenberg

Abstract: Coherent interconversion between microwave and optical frequencies can serve as both classical and quantum interfaces for computing, communication, and sensing. Here, we present a compact microwave-optical transducer based on monolithic integration of piezoelectric actuators atop silicon nitride photonic circuits. Such an actuator directly couples microwave signals to a high-overtone bulk acoustic… ▽ More Coherent interconversion between microwave and optical frequencies can serve as both classical and quantum interfaces for computing, communication, and sensing. Here, we present a compact microwave-optical transducer based on monolithic integration of piezoelectric actuators atop silicon nitride photonic circuits. Such an actuator directly couples microwave signals to a high-overtone bulk acoustic resonator defined by the suspended silica cladding of the optical waveguide core, which leads to enhanced electromechanical and optomechanical couplings. At room temperature, this triply resonant piezo-optomechanical transducer achieves an off-chip photon number conversion efficiency of -48 dB over a bandwidth of 25 MHz at an input pump power of 21 dBm. The approach is scalable in manufacturing and, unlike existing electro-optic transducers, does not rely on superconducting resonators. As the transduction process is bidirectional, we further demonstrate synthesis of microwave pulses from a purely optical input. Combined with the capability of leveraging multiple acoustic modes for transduction, the present platform offers prospects for building frequency-multiplexed qubit interconnects and for microwave photonics at large. △ Less

Submitted 13 December, 2023; v1 submitted 4 August, 2023; originally announced August 2023.

Non-invasive Deep-Brain Imaging with 3D Integrated Photoacoustic Tomography and Ultrasound Localization Microscopy (3D-PAULM)

Authors: Yuqi Tang, Zhijie Dong, Nanchao Wang, Angela del Aguila, Natalie Johnston, Tri Vu, Chenshuo Ma, Yirui Xu, Wei Yang, Pengfei Song, Junjie Yao

Abstract: Photoacoustic computed tomography (PACT) is a proven technology for imaging hemodynamics in deep brain of small animal models. PACT is inherently compatible with ultrasound (US) imaging, providing complementary contrast mechanisms. While PACT can quantify the brain's oxygen saturation of hemoglobin (sO$_2$), US imaging can probe the blood flow based on the Doppler effect. Further, by tracking gas-… ▽ More Photoacoustic computed tomography (PACT) is a proven technology for imaging hemodynamics in deep brain of small animal models. PACT is inherently compatible with ultrasound (US) imaging, providing complementary contrast mechanisms. While PACT can quantify the brain's oxygen saturation of hemoglobin (sO$_2$), US imaging can probe the blood flow based on the Doppler effect. Further, by tracking gas-filled microbubbles, ultrasound localization microscopy (ULM) can map the blood flow velocity with sub-diffraction spatial resolution. In this work, we present a 3D deep-brain imaging system that seamlessly integrates PACT and ULM into a single device, 3D-PAULM. Using a low ultrasound frequency of 4 MHz, 3D-PAULM is capable of imaging the whole-brain hemodynamic functions with intact scalp and skull in a totally non-invasive manner. Using 3D-PAULM, we studied the mouse brain functions with ischemic stroke. Multi-spectral PACT, US B-mode imaging, microbubble-enhanced power Doppler (PD), and ULM were performed on the same mouse brain with intrinsic image co-registration. From the multi-modality measurements, we future quantified blood perfusion, sO$_2$, vessel density, and flow velocity of the mouse brain, showing stroke-induced ischemia, hypoxia, and reduced blood flow. We expect that 3D-PAULM can find broad applications in studying deep brain functions on small animal models. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: 10 pages

Free-electron interaction with nonlinear optical states in microresonators

Authors: Yujia Yang, Jan-Wilke Henke, Arslan S. Raja, F. Jasmin Kappert, Guanhao Huang, Germaine Arend, Zheru Qiu, Armin Feist, Rui Ning Wang, Aleksandr Tusnin, Alexey Tikan, Claus Ropers, Tobias J. Kippenberg

Abstract: The short de Broglie wavelength and strong interaction empower free electrons to probe scattering and excitations in materials and resolve the structure of biomolecules. Recent advances in using nanophotonic structures to mediate bilinear electron-photon interaction have brought novel optical manipulation schemes to electron beams, enabling high space-time-energy resolution electron microscopy, qu… ▽ More The short de Broglie wavelength and strong interaction empower free electrons to probe scattering and excitations in materials and resolve the structure of biomolecules. Recent advances in using nanophotonic structures to mediate bilinear electron-photon interaction have brought novel optical manipulation schemes to electron beams, enabling high space-time-energy resolution electron microscopy, quantum-coherent optical modulation, attosecond metrology and pulse generation, transverse electron wavefront sha**, dielectric laser acceleration, and electron-photon pair generation. However, photonic nanostructures also exhibit nonlinearities, which have to date not been exploited for electron-photon interactions. Here, we report the interaction of electrons with spontaneously generated Kerr nonlinear optical states inside a continuous-wave driven photonic chip-based microresonator. Optical parametric processes give rise to spatiotemporal pattern formation, or dissipative structures, corresponding to coherent or incoherent optical frequency combs. By coupling such microcombs in situ to electron beams, we demonstrate that different dissipative structures induce distinct fingerprints in the electron spectra and Ramsey-type interference patterns. In particular, using spontaneously formed femtosecond temporal solitons, we achieve ultrafast temporal gating of the electron beam without the necessity of a pulsed laser source or a pulsed electron source. Our work elucidates the interaction of free electrons with a variety of nonlinear dissipative states, demonstrates the ability to access solitons inside an electron microscope, and extends the use of microcombs to unexplored territories, with ramifications in novel ultrafast electron microscopy, light-matter interactions driven by on-chip temporal solitons, and ultra-high spatiotemporal resolution sampling of nonlinear optical dynamics and devices. △ Less

Submitted 22 July, 2023; originally announced July 2023.

A dynamic combustion model for supersonic turbulent combustion

Authors: Xu Zhu, Jian An, Nana Wang, Jian Zhang, Zhuyin Ren

Abstract: Supersonic combustion plays a vital role in various applications, including scramjets, dual-mode ramjets, and pulse detonation engines. However, the flame characteristics can vary significantly, depending on the application. To model supersonic combustion, large eddy simulation coupled with a partially stirred reactor (PaSR) is commonly used. This method assumes that reactions occur at turbulent f… ▽ More Supersonic combustion plays a vital role in various applications, including scramjets, dual-mode ramjets, and pulse detonation engines. However, the flame characteristics can vary significantly, depending on the application. To model supersonic combustion, large eddy simulation coupled with a partially stirred reactor (PaSR) is commonly used. This method assumes that reactions occur at turbulent fine flame structure in a computational cell, making it less effective for flames governed by not only turbulent mixing but also homogenous autoignition, which is common under supersonic flow. To address this limitation, this study proposes a novel dynamic combustion model to enable more versatile modeling of supersonic flames. The model utilizes a two-delta probability density function, which represents the sub-grid composition variation and models the filtered sub-grid reaction rate. The corresponding weights are dynamically modeled based on the level of cell composition inhomogeneity. The new dynamic model is tested in a supersonic combustion case study with a strut-cavity flame holder. Results demonstrate that the new dynamic model can properly recover the limits of supersonic flames that are primarily governed by homogenous autoignition and turbulent mixing. △ Less

Submitted 19 June, 2023; originally announced June 2023.

Hertz-linewidth and frequency-agile photonic integrated extended-DBR lasers

Authors: Anat Siddharth, Alaina Attanasio, Grigory Lihachev, Junyin Zhang, Zheru Qiu, Scott Kenning, Rui Ning Wang, Sunil A. Bhave, Johann Riemensberger, Tobias J. Kippenberg

Abstract: Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast (Megahertz bandwidth) tuning using monolithically integrated piezoelectrical actuators. While this marks the first time that fiber laser coherence is achieved using phot… ▽ More Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast (Megahertz bandwidth) tuning using monolithically integrated piezoelectrical actuators. While this marks the first time that fiber laser coherence is achieved using photonic integrated circuits, in conjunction with frequency agility that exceeds those of legacy bulk lasers, the approach is presently compounded by the high cost of manufacturing DFB, as required for self-injection locking, as well as the precise control over the laser current and temperature to sustain a low noise locked operation. Reflective semiconductor optical amplifiers (RSOA) provide a cost-effective alternative solution but have not yet achieved similar performance in coherence or frequency agility, as required for frequency modulated continuous wave (FMCW) LiDAR, laser locking in frequency metrology or wavelength modulation spectroscopy for gas sensing. Here, we overcome this challenge and demonstrate an RSOA-based and frequency agile integrated laser tuned with high speed, good linearity, high optical output power, and turn-key operability while maintaining a small footprint. This is achieved using a tunable extended distributed Bragg reflector (E-DBR) in an ultra-low loss 200 nm thin Si3N4 platform with monolithically integrated piezoelectric actuators. We co-integrate the DBR with a compact ultra-low loss spiral resonator to further reduce the intrinsic optical linewidth of the laser to the Hertz level -- on par with the noise of a fiber laser -- via self-injection locking. △ Less

Submitted 10 July, 2023; v1 submitted 5 June, 2023; originally announced June 2023.

Comments: 9 pages, 4 figures

A fully hybrid integrated Erbium-based laser

Authors: Yang Liu, Zheru Qiu, Xinru Ji, Andrea Bancora, Grigory Lihachev, Johann Riemensberger, Rui Ning Wang, Andrey Voloshin, Tobias J. Kippenberg

Abstract: Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a basis for miniaturizing low-noise fiber lasers to chip-scale form factor, and enable large-volume applications. Yet, while major progress has been made in the… ▽ More Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a basis for miniaturizing low-noise fiber lasers to chip-scale form factor, and enable large-volume applications. Yet, while major progress has been made in the last decade on integrated lasers based on silicon photonics with III-V gain media, the integration of Erbium lasers on chip has been compounded by large laser linewidth. Recent advances in photonic integrated circuit-based high-power Erbium-doped amplifiers, make a new class of rare-earth-ion-based lasers possible. Here, we demonstrate a fully integrated chip-scale Erbium laser that achieves high power, narrow linewidth, frequency agility, and the integration of a III-V pump laser. The laser circuit is based on an Erbium-implanted ultralow-loss silicon nitride Si$_3$N$4$ photonic integrated circuit. This device achieves single-mode lasing with a free-running intrinsic linewidth of 50 Hz, a relative intensity noise of $<$-150 dBc/Hz at $>$10 MHz offset, and output power up to 17 mW, approaching the performance of fiber lasers and state-of-the-art semiconductor extended cavity lasers. An intra-cavity microring-based Vernier filter enables wavelength tunability of $>$ 40 nm within the C- and L-bands while attaining side mode suppression ratio (SMSR) of $>$ 70 dB, surpassing legacy fiber lasers in tuning and SMRS performance. This new class of low-noise, tuneable Erbium waveguide laser could find applications in LiDAR, microwave photonics, optical frequency synthesis, and free-space communications. Our approach is extendable to other wavelengths, and more broadly, constitutes a novel way to photonic integrated circuit-based rare-earth-ion-doped lasers. △ Less

Submitted 5 May, 2023; originally announced May 2023.

High dynamic range open-loop current measurement based on diamond quantum magnetometer achieving ppm scale precision

Authors: Qihui Liu, Hao Chen, Fei Xie, Yuqiang Hu, ** Zhang, Nan Wang, Lihao Wang, Yichen Liu, Yang Wang, Zhichao Chen, Lingyun Li, Jiangong Cheng, Zhenyu Wu

Abstract: Negatively charged nitrogen-vacancy (NV) centers in diamond have been extensively studied as a promising high sensitivity solid-state magnetic field sensor at room temperature. However, their use for current sensing applications is limited due to the challenge of integration and miniaturization of the diamond NV sensor. Here, we demonstrate an integrated NV sensor fabricated with standard microfab… ▽ More Negatively charged nitrogen-vacancy (NV) centers in diamond have been extensively studied as a promising high sensitivity solid-state magnetic field sensor at room temperature. However, their use for current sensing applications is limited due to the challenge of integration and miniaturization of the diamond NV sensor. Here, we demonstrate an integrated NV sensor fabricated with standard microfabrication process. The sensor device incorporated with a toroidal magnetic yoke enables a high-precision wide range direct current sensing with galvanic isolation. The performance of the diamond NV current sensor in an open loop configuration has been investigated. A current measuring range of 0 A ~ 1000 A with an uncertainty of 46 ppm are achieved. Taking advantage of dual spin resonance modulation, temperature drift is suppressed to 10 ppm/K. This configuration opens new possibilities as a robust and scalable platform for current quantum sensing technologies. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 16pages, 6figures

Kerker-Type Positional Disorder Immune Metasurfaces

Authors: Hao Song, Binbin Hong, Neng Wang, Guo ** Wang

Abstract: Metasurfaces that can work without the rigorous periodic arrangement of meta-atoms are highly desired by practical optical micro-nano devices. In this work, we proposed two kinds of Kerker-type metasurfaces possessing positional disorder immunity. The metasurfaces are composed of two different core-shell cylinders satisfying the first and second Kerker conditions, respectively. Even with large pos… ▽ More Metasurfaces that can work without the rigorous periodic arrangement of meta-atoms are highly desired by practical optical micro-nano devices. In this work, we proposed two kinds of Kerker-type metasurfaces possessing positional disorder immunity. The metasurfaces are composed of two different core-shell cylinders satisfying the first and second Kerker conditions, respectively. Even with large positional disorder perturbation of the meta-atoms, the metasurfaces can still maintain the same excellent performances as periodic ones, such as the total transmission and magnetic mirror responses. This disorder immunity is due to the unidirectional forward and backward scatterings of a single core-shell cylinder leading to very weak lateral couplings between neighboring cylinders thus rarely affecting the multiple scatterings in the forward or backward direction. In contrast, the dominant response of the disordered non-Kerker-type metasurface decreases significantly. Our findings provide a new idea for designing robust metasurfaces and extend the scope of metasurface applications in sensing and communication under complex practical circumstances. △ Less

Submitted 5 April, 2023; originally announced April 2023.

Comments: 18 pages, 9 figures

High-fidelity Rydberg controlled-Z gates with optimal pulses

Authors: T. H. Chang, T. N. Wang, H. H. Jen, Y. -C. Chen

Abstract: High-fidelity control-$Z$ ($C_Z$) gates are essential and mandatory to build a large-scale quantum computer. In neutral atoms, the strong dipole-dipole interactions between their Rydberg states make them one of the pioneering platforms to implement $C_Z$ gates. Here we numerically investigate the time-optimal pulses to generate a high-fidelity Rydberg $C_{Z}$ gate in a three-level ladder-type atom… ▽ More High-fidelity control-$Z$ ($C_Z$) gates are essential and mandatory to build a large-scale quantum computer. In neutral atoms, the strong dipole-dipole interactions between their Rydberg states make them one of the pioneering platforms to implement $C_Z$ gates. Here we numerically investigate the time-optimal pulses to generate a high-fidelity Rydberg $C_{Z}$ gate in a three-level ladder-type atomic system. By tuning the temporal shapes of Gaussian or segmented pulses, the populations on the intermediate excited states are shown to be suppressed within the symmetric gate operation protocol, which leads to a $C_{Z}$ gate with a high Bell fidelity up to $99.92\%$. These optimized pulses are robust to thermal fluctuations and the excitation field variations. Our results promise a high-fidelity and fast gate operation under amenable and controllable experimental parameters, which goes beyond the adiabatic operation regime under a finite Blockade strength. △ Less

Submitted 24 November, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Comments: 6 figures

Journal ref: New J. Phys. 25, 123007 (2023)

Disruption Precursor Onset Time Study Based on Semi-supervised Anomaly Detection

Authors: Xinkun Ai, Wei Zheng, Ming Zhang, Dalong Chen, Chengshuo Shen, Bihao Guo, Bingjia Xiao, Yu Zhong, Nengchao Wang, Zhoujun Yang, Zhipeng Chen, Zhongyong Chen, Yonghua Ding, Yuan Pan, J-TEXT team

Abstract: The full understanding of plasma disruption in tokamaks is currently lacking, and data-driven methods are extensively used for disruption prediction. However, most existing data-driven disruption predictors employ supervised learning techniques, which require labeled training data. The manual labeling of disruption precursors is a tedious and challenging task, as some precursors are difficult to a… ▽ More The full understanding of plasma disruption in tokamaks is currently lacking, and data-driven methods are extensively used for disruption prediction. However, most existing data-driven disruption predictors employ supervised learning techniques, which require labeled training data. The manual labeling of disruption precursors is a tedious and challenging task, as some precursors are difficult to accurately identify, limiting the potential of machine learning models. To address this issue, commonly used labeling methods assume that the precursor onset occurs at a fixed time before the disruption, which may not be consistent for different types of disruptions or even the same type of disruption, due to the different speeds at which plasma instabilities escalate. This leads to mislabeled samples and suboptimal performance of the supervised learning predictor. In this paper, we present a disruption prediction method based on anomaly detection that overcomes the drawbacks of unbalanced positive and negative data samples and inaccurately labeled disruption precursor samples. We demonstrate the effectiveness and reliability of anomaly detection predictors based on different algorithms on J-TEXT and EAST to evaluate the reliability of the precursor onset time inferred by the anomaly detection predictor. The precursor onset times inferred by these predictors reveal that the labeling methods have room for improvement as the onset times of different shots are not necessarily the same. Finally, we optimize precursor labeling using the onset times inferred by the anomaly detection predictor and test the optimized labels on supervised learning disruption predictors. The results on J-TEXT and EAST show that the models trained on the optimized labels outperform those trained on fixed onset time labels. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: 21 pages, 11 figures

Report number: S1738-5733(23)00556-9

Journal ref: Nuclear Engineering and Technology 2023

Charge-density-wave resistive switching and voltage oscillations in ternary chalcogenide BaTiS3

Authors: Huandong Chen, Nan Wang, Hefei Liu, Han Wang, Jayakanth Ravichandran

Abstract: Phase change materials, which show different electrical characteristics across the phase transitions, have attracted considerable research attention for their potential electronic device applications. Materials with metal-to-insulator or charge density wave (CDW) transitions such as VO2 and 1T-TaS2 have demonstrated voltage oscillations due to their robust bi-state resistive switching behavior wit… ▽ More Phase change materials, which show different electrical characteristics across the phase transitions, have attracted considerable research attention for their potential electronic device applications. Materials with metal-to-insulator or charge density wave (CDW) transitions such as VO2 and 1T-TaS2 have demonstrated voltage oscillations due to their robust bi-state resistive switching behavior with some basic neuronal characteristics. BaTiS3 is a small bandgap ternary chalcogenide that has recently reported the emergence CDW order below 245 K. Here, we report on the discovery of DC voltage / current-induced reversible threshold switching in BaTiS3 devices between a CDW phase and a room temperature semiconducting phase. The resistive switching behavior is consistent with a Joule heating scheme and sustained voltage oscillations with a frequency of up to 1 kHz has been demonstrated by leveraging the CDW phase transition and the associated negative differential resistance. Strategies of reducing channel sizes and improving thermal management may further improve the device performance. Our findings establish BaTiS3 as a promising CDW material for future energy-efficient electronics, especially for neuromorphic computing. △ Less

Submitted 24 March, 2023; originally announced March 2023.

Journal ref: Adv. Electron. Mater. 2023, 2300461

Plasma kinetics: Discrete Boltzmann modelling and Richtmyer-Meshkov instability

Authors: Jiahui Song, Aiguo Xu, Long Miao, Feng Chen, Zhipeng Liu, Lifeng Wang, Ningfei Wang, Xiao Hou

Abstract: A discrete Boltzmann model (DBM) for plasma kinetics is proposed. The constructing of DBM mainly considers two aspects. The first is to build a physical model with sufficient physical functions before simulation. The second is to present schemes for extracting more valuable information from massive data after simulation. For the first aspect, the model is equivalent to a magnetohydrodynamic model… ▽ More A discrete Boltzmann model (DBM) for plasma kinetics is proposed. The constructing of DBM mainly considers two aspects. The first is to build a physical model with sufficient physical functions before simulation. The second is to present schemes for extracting more valuable information from massive data after simulation. For the first aspect, the model is equivalent to a magnetohydrodynamic model plus a coarse-grained model for the most relevant TNE behaviors including the entropy production rate. A number of typical benchmark problems including Orszag-Tang (OT) vortex problem are used to verify the physical functions of DBM. For the second aspect, the DBM use non-conserved kinetic moments of (f-feq) to describe non-equilibrium state and behaviours of complex system. The OT vortex problem and the Richtmyer-Meshkov instability (RMI) are practical applications of the second aspect. For RMI with interface inverse and re-shock process, it is found that, in the case without magnetic field, the non-organized momentum flux shows the most pronounced effects near shock front, while the non-organized energy flux shows the most pronounced behaviors near perturbed interface. The influence of magnetic field on TNE effects shows stages: before the interface inverse, the TNE strength is enhanced by reducing the interface inverse speed; while after the interface inverse, the TNE strength is significantly reduced. Both the global average TNE strength and entropy production rate contributed by non-organized energy flux can be used as physical criteria to identify whether or not the magnetic field is sufficient to prevent the interface inverse. △ Less

Submitted 15 April, 2024; v1 submitted 22 March, 2023; originally announced March 2023.

Comments: 20 pages, 15 figures

Journal ref: Physics of Fluids 36, 016107 (2024)

Frequency agile photonic integrated external cavity laser

Authors: Grigory Lihachev, Andrea Bancora, Viacheslav Snigirev, Hao Tian, Johann Riemensberger, Vladimir Shadymov, Anat Siddharth, Alena Attanasio, Rui Ning Wang, Diego Visani, Andrey Voloshin, Sunil Bhave, Tobias J. Kippenberg

Abstract: Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contr… ▽ More Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contrast, turn-key legacy laser systems use reflective semiconductor optical amplifiers (RSOA). While this scheme has been utilized for integrated photonics-based lasers, so far, no cost-effective RSOA-based integrated lasers exist that are low noise and simultaneously feature fast, mode-hop-free and linear frequency tuning as required for frequency modulated continuous wave (FMCW) LiDAR or for laser locking in frequency metrology. Here we overcome this challenge and demonstrate a RSOA-based, frequency agile integrated laser, that can be tuned with high speed, with high linearity at low power. This is achieved using monolithic integration of piezoelectrical actuators on ultra-low loss silicon nitride photonic integrated circuits in a Vernier filter-based laser scheme. The laser operates at 1550 nm, features 6 mW output power, 400 Hz intrinsic laser linewidth, and allows ultrafast wavelength switching within 7 ns rise time and 75 nW power consumption. In addition, we demonstrate the suitability for FMCW LiDAR by showing laser frequency tuning over 1.5 GHz at 100 kHz triangular chirp rate with nonlinearity of 0.25% after linearization, and use the source for measuring a target scene 10 m away with a 8.5 cm distance resolution. △ Less

Submitted 20 March, 2023; v1 submitted 1 March, 2023; originally announced March 2023.

Quantum PT-Phase Diagram in a Non-Hermitian Photonic Structure

Authors: Xinchen Zhang, Yun Ma, Qi Liu, Nuo Wang, Yali Jia, Qi Zhang, Zhanqiang Bai, Junxiang Zhang, Qihuang Gong, Ying Gu

Abstract: Photonic structures have an inherent advantage to realize PT-phase transition through modulating the refractive index or gain-loss. However, quantum PT properties of these photonic systems have not been comprehensively studied yet. Here, in a bi-photonic structure with loss and gain simultaneously existing, we analytically obtained the quantum PT-phase diagram under the steady state condition. To… ▽ More Photonic structures have an inherent advantage to realize PT-phase transition through modulating the refractive index or gain-loss. However, quantum PT properties of these photonic systems have not been comprehensively studied yet. Here, in a bi-photonic structure with loss and gain simultaneously existing, we analytically obtained the quantum PT-phase diagram under the steady state condition. To characterize the PT-symmetry or -broken phase, we define an Hermitian exchange operator expressing the exchange between quadrature variables of two modes. If inputting several-photon Fock states into a PT-broken bi-waveguide splitting system, most photons will concentrate in the dominant waveguide with some state distributions. Quantum PT-phase diagram paves the way to the quantum state engineering, quantum interferences, and logic operations in non-Hermitian photonic systems. △ Less

Submitted 3 September, 2023; v1 submitted 28 February, 2023; originally announced March 2023.

Comments: 6 pages, 3 figures

A generalized theory of Brownian particle diffusion in shear flows

Authors: Nan Wang, Yuval Dagan

Abstract: This study presents a generalized theory for the diffusion of Brownian particles in shear flows. By solving the Langevin equations using stochastic instead of classical calculus, we propose a new mathematical formulation that resolves the particle MSD at all time scales for any two-dimensional parallel shear flow described by a polynomial velocity profile. We show that at long-time scales, the pol… ▽ More This study presents a generalized theory for the diffusion of Brownian particles in shear flows. By solving the Langevin equations using stochastic instead of classical calculus, we propose a new mathematical formulation that resolves the particle MSD at all time scales for any two-dimensional parallel shear flow described by a polynomial velocity profile. We show that at long-time scales, the polynomial order of time in the particle MSD is n+2, where n is the polynomial order of the transverse coordinate of the velocity profile. We generalize the theory to resolve particle diffusion in any polynomial shear flow at all time scales, including the order of particle relaxation time scale, which is unresolved in current theories. Particle diffusion at all time scales is then studied for the cases of Couette and plane-Poiseuille flows and a polynomial expansion of a hyperbolic tangent flow while neglecting the boundary effects. We observe three main stages of particle diffusion along the timeline for which the particle MSD is distinctly different due to different dominated physical mechanisms. Thus, higher temporal and spatial resolution for diffusion processes in shear flows may be realized, suggesting a more accurate analytical approach for the diffusion of Brownian particles. △ Less

Submitted 18 September, 2023; v1 submitted 7 November, 2022; originally announced November 2022.

An Integrated Photon-Pair Source with Monolithic Piezoelectric Frequency Tunability

Authors: Tiff Brydges, Arslan S. Raja, Angelo Gelmini, Grigorii Lihachev, Antoine Petitjean, Anat Siddharth, Hao Tian, Rui N. Wang, Sunil A. Bhave, Hugo Zbinden, Tobias J. Kippenberg, Rob Thew

Abstract: This work demonstrates the capabilities of an entangled photon-pair source at telecom wavelengths, based on a photonic integrated Si$_3$N$_4$ microresonator with monolithically integrated piezoelectric frequency tuning. Previously, frequency tuning of photon-pairs generated by microresonators has only been demonstrated using thermal control, however these have limited actuation bandwidth, and are… ▽ More This work demonstrates the capabilities of an entangled photon-pair source at telecom wavelengths, based on a photonic integrated Si$_3$N$_4$ microresonator with monolithically integrated piezoelectric frequency tuning. Previously, frequency tuning of photon-pairs generated by microresonators has only been demonstrated using thermal control, however these have limited actuation bandwidth, and are not compatible with cryogenic environments. Here, the frequency-tunable photon-pair generation capabilities of a Si$_3$N$_4$ microresonator with a monolithically integrated aluminium nitride layer are shown. Fast-frequency locking of the microresonator to an external laser is demonstrated, with a resulting locking bandwidth orders of magnitude larger than reported previously using thermal locking. These abilities will have direct application in future schemes which interface such sources with quantum memories based on e.g. trapped-ion or rare-earth ion schemes. △ Less

Submitted 9 January, 2023; v1 submitted 28 October, 2022; originally announced October 2022.

Journal ref: Phys. Rev. A 107, 052602 (2023)

Isolating Chemical Reaction Mechanism as a Variable with Reactive Coarse-Grained Molecular Dynamics: Step-Growth versus Chain-Growth Polymerization

Authors: John J. Karnes, Todd H. Weisgraber, Caitlyn C. Cook, Daniel N. Wang, Jonathan C. Crowhurst, Christina A. Fox, Bradley S. Harris, James S. Oakdale, Roland Faller, Maxim Shusteff

Abstract: We present a general approach to isolate chemical reaction mechanism as an independently controllable variable across chemically distinct systems. Modern approaches to reduce the computational expense of molecular dynamics simulations often group multiple atoms into a single "coarse-grained" interaction site, which leads to a loss of chemical resolution. In this work we convert this shortcoming in… ▽ More We present a general approach to isolate chemical reaction mechanism as an independently controllable variable across chemically distinct systems. Modern approaches to reduce the computational expense of molecular dynamics simulations often group multiple atoms into a single "coarse-grained" interaction site, which leads to a loss of chemical resolution. In this work we convert this shortcoming into a feature and use identical coarse-grained models to represent molecules that share non-reactive characteristics but react by different mechanisms. As a proof of concept we use this approach to simulate and investigate distinct, yet similar, trifunctional isocyanurate resin formulations that polymerize by either chain- or step-growth. Since the underlying molecular mechanics of these models are identical, all emergent differences are a function of the reaction mechanism only. We find that the microscopic morphologies resemble related all-atom simulations and that simulated mechanical testing reasonably agrees with experiment. △ Less

Submitted 4 October, 2022; originally announced October 2022.

$^{197}$Au($γ,\,xn;\,x\,=\,1\thicksim9$) Reaction Cross Section Measurements using Laser-Driven Ultra-Intense $γ$-Ray Source

Authors: D. Wu, H. Y. Lan, J. Y. Zhang, J. X. Liu, H. G. Lu, J. F. Lv, X. Z. Wu, H. Zhang, J. Cai, Q. Y. Ma, Y. H. Xia, Z. N. Wang, M. Z. Wang, Z. Y. Yang, X. L. Xu, Y. X. Geng, Y. Y. Zhao, C. Lin, W. J. Ma, J. Q. Yu, H. R. Wang, F. L. Liu, C. Y. He, B. Guo, P. Zhu , et al. (4 additional authors not shown)

Abstract: We present a new method for the measurements of photonuclear reaction flux-weighted average cross sections and isomeric ratios using a laser-driven bremsstrahlung $γ$-ray source. An ultra-bright ultra-fast 60$\,\thicksim\,$250 MeV bremsstrahlung $γ$-ray source was established using the 200 TW laser facility in the Compact Laser Plasma Accelerator Laboratory, Peking University, which could cover th… ▽ More We present a new method for the measurements of photonuclear reaction flux-weighted average cross sections and isomeric ratios using a laser-driven bremsstrahlung $γ$-ray source. An ultra-bright ultra-fast 60$\,\thicksim\,$250 MeV bremsstrahlung $γ$-ray source was established using the 200 TW laser facility in the Compact Laser Plasma Accelerator Laboratory, Peking University, which could cover the energy range from knocking out neutrons to producing pions. Stable quasi-monoenergetic electron beams were generated via laser wakefield acceleration with a charge of 300$\,\thicksim\,$600 pC per shot. The averaged $γ$-ray intensities ($\geqslant$8 MeV) were higher than 10$^{8}$ per shot and the instantaneous intensities can reach above 10$^{19}$ s$^{-1}$ with a duration time about 6.7 ps. $^{65}$Cu($γ,\,n$)$^{64}$Cu and $^{27}$Al($γ,\,x$)$^{24}$Na reactions were used as $γ$-ray flux monitors in the experiments. The flux-weighted average cross sections and isomeric ratios of $^{197}$Au($γ,\,xn;\,x\,=\,1\thicksim9$) reactions were analyzed through activation measurements. The results showed good agreement with previous works and proved this method to be accurate. The $^{197}$Au($γ,\,xn;\,x\,=\,7\thicksim\,9$) reaction cross sections were first achieved with the highest threshold energy of 71.410 MeV. Theoretical cross sections of TALYS 1.9 were calculated to compare with experiment results. This method offered a unique way of gaining insight into photonuclear reaction research, especially for short-lived isomers which extremely lack experimental data. △ Less

Submitted 23 November, 2023; v1 submitted 28 September, 2022; originally announced September 2022.

Recommendations and guidelines from the ISMRM Diffusion Study Group for preclinical diffusion MRI: Part 2 -- Ex vivo imaging

Authors: Kurt G Schilling, Francesco Grussu, Andrada Ianus, Brian Hansen, Rachel L C Barrett, Manisha Aggarwal, Stijn Michielse, Fatima Nasrallah, Warda Syeda, Nian Wang, Jelle Veraart, Alard Roebroeck, Andrew F Bagdasarian, Cornelius Eichner, Farshid Sepehrband, Jan Zimmermann, Lucas Soustelle, Christien Bowman, Benjamin C Tendler, Andreea Hertanu, Ben Jeurissen, Lucio Frydman, Yohan van de Looij, David Hike, Jeff F Dunn , et al. (31 additional authors not shown)

Abstract: The value of preclinical diffusion MRI (dMRI) is substantial. While dMRI enables in vivo non-invasive characterization of tissue, ex vivo dMRI is increasingly being used to probe tissue microstructure and brain connectivity. Ex vivo dMRI has several experimental advantages including higher signal-to-noise ratio and spatial resolution compared to in vivo studies, and more advanced diffusion contras… ▽ More The value of preclinical diffusion MRI (dMRI) is substantial. While dMRI enables in vivo non-invasive characterization of tissue, ex vivo dMRI is increasingly being used to probe tissue microstructure and brain connectivity. Ex vivo dMRI has several experimental advantages including higher signal-to-noise ratio and spatial resolution compared to in vivo studies, and more advanced diffusion contrasts for improved microstructure and connectivity characterization. Another major advantage is direct comparison with histological data as a crucial methodological validation. However, there are a number of considerations that must be made when performing ex vivo experiments. The steps from tissue preparation, image acquisition and processing, and interpretation of results are complex, with many decisions that not only differ dramatically from in vivo imaging, but ultimately affect what questions can be answered using the data. This work represents 'Part 2' of a series of recommendations and considerations for preclinical dMRI, where we focus on best practices for dMRI of ex vivo tissue. We first describe the value that ex vivo imaging adds to the field of dMRI, followed by general considerations and foundational knowledge that must be considered when designing experiments. We then give guidelines for ex vivo protocols, including tissue preparation, imaging sequences and data processing including pre-processing, model-fitting, and tractography. Finally, we provide an online resource which lists publicly available ex vivo dMRI datasets and dedicated software packages. In each section, we attempt to provide guidelines and recommendations, but also highlight areas for which no guidelines exist, and where future work should lie. An overarching goal herein is to enhance the rigor and reproducibility of ex vivo dMRI acquisitions and analyses, and thereby advance biomedical knowledge. △ Less

Submitted 7 February, 2023; v1 submitted 27 September, 2022; originally announced September 2022.

Comments: 59 pages, 12 figures, part of ongoing efforts on ISMRM Diffusion Study Group initiative 'Best Practices (Consensus) for diffusion MRI'. arXiv admin note: text overlap with arXiv:2209.12994

Recommendations and guidelines from the ISMRM Diffusion Study Group for preclinical diffusion MRI: Part 1 -- In vivo small-animal imaging

Authors: Ileana O Jelescu, Francesco Grussu, Andrada Ianus, Brian Hansen, Rachel L C Barrett, Manisha Aggarwal, Stijn Michielse, Fatima Nasrallah, Warda Syeda, Nian Wang, Jelle Veraart, Alard Roebroeck, Andrew F Bagdasarian, Cornelius Eichner, Farshid Sepehrband, Jan Zimmermann, Lucas Soustelle, Christien Bowman, Benjamin C Tendler, Andreea Hertanu, Ben Jeurissen, Marleen Verhoye, Lucio Frydman, Yohan van de Looij, David Hike , et al. (32 additional authors not shown)

Abstract: The value of in vivo preclinical diffusion MRI (dMRI) is substantial. Small-animal dMRI has been used for methodological development and validation, characterizing the biological basis of diffusion phenomena, and comparative anatomy. Many of the influential works in this field were first performed in small animals or ex vivo samples. The steps from animal setup and monitoring, to acquisition, anal… ▽ More The value of in vivo preclinical diffusion MRI (dMRI) is substantial. Small-animal dMRI has been used for methodological development and validation, characterizing the biological basis of diffusion phenomena, and comparative anatomy. Many of the influential works in this field were first performed in small animals or ex vivo samples. The steps from animal setup and monitoring, to acquisition, analysis, and interpretation are complex, with many decisions that may ultimately affect what questions can be answered using the data. This work aims to serve as a reference, presenting selected recommendations and guidelines from the diffusion community, on best practices for preclinical dMRI of in vivo animals. In each section, we also highlight areas for which no guidelines exist (and why), and where future work should focus. We first describe the value that small animal imaging adds to the field of dMRI, followed by general considerations and foundational knowledge that must be considered when designing experiments. We briefly describe differences in animal species and disease models and discuss how they are appropriate for different studies. We then give guidelines for in vivo acquisition protocols, including decisions on hardware, animal preparation, imaging sequences and data processing, including pre-processing, model-fitting, and tractography. Finally, we provide an online resource which lists publicly available preclinical dMRI datasets and software packages, to promote responsible and reproducible research. An overarching goal herein is to enhance the rigor and reproducibility of small animal dMRI acquisitions and analyses, and thereby advance biomedical knowledge. △ Less

Submitted 21 April, 2023; v1 submitted 26 September, 2022; originally announced September 2022.

Comments: 69 pages, 6 figures, 1 table

Photon-counting CT thermometry via material decomposition and machine learning

Authors: Nathan Wang, Mengzhou Li, Petteri Haverinen

Abstract: Thermal ablation procedures, such as high intensity focused ultrasound (HIFU) and Radiofrequency Ablation (RFA), are often used to eliminate tumors by minimally invasively heating a focal region. For this task, real-time 3D temperature visualization is key to target the diseased tissues while minimizing damage to the surroundings. Current CT thermometry is based on energy-integrated CT, tissue-spe… ▽ More Thermal ablation procedures, such as high intensity focused ultrasound (HIFU) and Radiofrequency Ablation (RFA), are often used to eliminate tumors by minimally invasively heating a focal region. For this task, real-time 3D temperature visualization is key to target the diseased tissues while minimizing damage to the surroundings. Current CT thermometry is based on energy-integrated CT, tissue-specific experimental data, and linear relationships between attenuation and temperature. In this letter, we develop a novel approach using photon-counting CT for material decomposition and a neural network to predict temperature based on thermal characteristics of base materials and spectral tomographic measurements of a volume of interest. In our feasibility study, distilled water, 50 mM CaCl2, and 600 mM CaCl2 are chosen as the base materials. Their attenuations are measured in four discrete energy bins at various temperatures. The neural network trained on the experimental data achieves a mean absolute error of 1.80 °C and 3.97 °C on 300 mM CaCl2 and a milk-based protein shake respectively. These experimental results indicate that our approach is promising for handling nonlinear thermal properties for materials that are similar or dissimilar to our base materials. △ Less

Submitted 16 January, 2023; v1 submitted 25 September, 2022; originally announced September 2022.

Journal ref: Vis. Comput. Ind. Biomed. Art 6, 2 (2023)

IDP-PGFE: An Interpretable Disruption Predictor based on Physics-Guided Feature Extraction

Authors: Chengshuo Shen, Wei Zheng, Yonghua Ding, Xinkun Ai, Fengming Xue, Yu Zhong, Nengchao Wang, Li Gao, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yuan Pan, J-TEXT team

Abstract: Disruption prediction has made rapid progress in recent years, especially in machine learning (ML)-based methods. Understanding why a predictor makes a certain prediction can be as crucial as the prediction's accuracy for future tokamak disruption predictors. The purpose of most disruption predictors is accuracy or cross-machine capability. However, if a disruption prediction model can be interpre… ▽ More Disruption prediction has made rapid progress in recent years, especially in machine learning (ML)-based methods. Understanding why a predictor makes a certain prediction can be as crucial as the prediction's accuracy for future tokamak disruption predictors. The purpose of most disruption predictors is accuracy or cross-machine capability. However, if a disruption prediction model can be interpreted, it can tell why certain samples are classified as disruption precursors. This allows us to tell the types of incoming disruption and gives us insight into the mechanism of disruption. This paper designs a disruption predictor called Interpretable Disruption Predictor based On Physics-guided feature extraction (IDP-PGFE) on J-TEXT. The prediction performance of the model is effectively improved by extracting physics-guided features. A high-performance model is required to ensure the validity of the interpretation results. The interpretability study of IDP-PGFE provides an understanding of J-TEXT disruption and is generally consistent with existing comprehension of disruption. IDP-PGFE has been applied to the disruption due to continuously increasing density towards density limit experiments on J-TEXT. The time evolution of the PGFE features contribution demonstrates that the application of ECRH triggers radiation-caused disruption, which lowers the density at disruption. While the application of RMP indeed raises the density limit in J-TEXT. The interpretability study guides intuition on the physical mechanisms of density limit disruption that RMPs affect not only the MHD instabilities but also the radiation profile, which delays density limit disruption. △ Less

Submitted 28 August, 2022; originally announced August 2022.

Comments: 17 pages, 15 figures

Transferable Cross-Tokamak Disruption Prediction with Deep Hybrid Neural Network Feature Extractor

Authors: Wei Zheng, Fengming Xue, Ming Zhang, Zhongyong Chen, Chengshuo Shen, Xinkun Ai, Nengchao Wang, Dalong Chen, Bihao Guo, Yonghua Ding, Zhipeng Chen, Zhoujun Yang, Biao Shen, Bingjia Xiao, Yuan Pan

Abstract: Predicting disruptions across different tokamaks is a great obstacle to overcome. Future tokamaks can hardly tolerate disruptions at high performance discharge. Few disruption discharges at high performance can hardly compose an abundant training set, which makes it difficult for current data-driven methods to obtain an acceptable result. A machine learning method capable of transferring a disrupt… ▽ More Predicting disruptions across different tokamaks is a great obstacle to overcome. Future tokamaks can hardly tolerate disruptions at high performance discharge. Few disruption discharges at high performance can hardly compose an abundant training set, which makes it difficult for current data-driven methods to obtain an acceptable result. A machine learning method capable of transferring a disruption prediction model trained on one tokamak to another is required to solve the problem. The key is a disruption prediction model containing a feature extractor that is able to extract common disruption precursor traces in tokamak diagnostic data, and a transferable disruption classifier. Based on the concerns above, the paper first presents a deep fusion feature extractor designed specifically for extracting disruption precursor features from common diagnostics on tokamaks according to currently known precursors of disruption, providing a promising foundation for transferable models. The fusion feature extractor is proved by comparing with manual feature extraction on J-TEXT. Based on the feature extractor trained on J-TEXT, the disruption prediction model was transferred to EAST data with mere 20 discharges from EAST experiment. The performance is comparable with a model trained with 1896 discharges from EAST. From the comparison among other model training scenarios, transfer learning showed its potential in predicting disruptions across different tokamaks. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Tightly confining lithium niobate photonic integrated circuits and lasers

Authors: Zihan Li, Rui Ning Wang, Grigorii Lihachev, Zelin Tan, Viacheslav Snigirev, Mikhail Churaev, Nikolai Kuznetsov, Anat Siddharth, Mohammad J. Bereyhi, Johann Riemensberger, Tobias J. Kippenberg

Abstract: Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are ferroelectrics such as Lithium Niobate, which exhibit a large electro-optical Pockels effect enabling ultrafast and efficient modulation, but are difficult to proc… ▽ More Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are ferroelectrics such as Lithium Niobate, which exhibit a large electro-optical Pockels effect enabling ultrafast and efficient modulation, but are difficult to process via dry etching . For this reason, etching tightly confining waveguides - routinely achieved in silicon or silicon nitride - has not been possible. Diamond-like carbon (DLC) was discovered in the 1950s and is a material that exhibits an amorphous phase, excellent hardness, and the ability to be deposited in nano-metric thin films. It has excellent thermal, mechanical, and electrical properties, making it an ideal protective coating. Here we demonstrate that DLC is also a superior material for the manufacturing of next-generation photonic integrated circuits based on ferroelectrics, specifically Lithium Niobate on insulator (LNOI). Using DLC as a hard mask, we demonstrate the fabrication of deeply etched, tightly confining, low loss photonic integrated circuits with losses as low as 5.6 dB/m. In contrast to widely employed ridge waveguides, this approach benefits from a more than 1 order of magnitude higher area integration density while maintaining efficient electro-optical modulation, low loss, and offering a route for efficient optical fiber interfaces. As a proof of concept, we demonstrate a frequency agile hybrid integrated III-V Lithium Niobate based laser with kHz linewidth and tuning rate of 0.7 Peta-Hertz per second with excellent linearity and CMOS-compatible driving voltage. Our approach can herald a new generation of tightly confining ferroelectric photonic integrated circuits. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: 10 pages, 5 figures

Acceleration of 60 MeV proton beams in the commissioning experiment of SULF-10 PW laser

Authors: A. X. Li, C. Y. Qin, H. Zhang, S. Li, L. L. Fan, Q. S. Wang, T. J. Xu, N. W. Wang, L. H. Yu, Y. Xu, Y. Q. Liu, C. Wang, X. L. Wang, Z. X. Zhang, X. Y. Liu, P. L. Bai, Z. B. Gan, X. B. Zhang, X. B. Wang, C. Fan, Y. J. Sun, Y. H. Tang, B. Yao, X. Y. Liang, Y. X. Leng , et al. (3 additional authors not shown)

Abstract: We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 1… ▽ More We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 10^{21} W/cm^2. First laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration (TNSA). For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, e.g., both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 10^{22}-10^{23} W/cm^2 are anticipated to support various experiments on extreme field physics. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: 20 pages, 8 figures, regular article, This article has been submitted to "High Power Laser Science and Engineering"

Dissipative solitons and switching waves in dispersion folded Kerr cavities

Authors: Miles H. Anderson, Alexey Tikan, Aleksandr Tusnin, Johann Riemensberger, Rui Ning Wang, Tobias J. Kippenberg

Abstract: We theoretically and experimentally investigate the formation of dissipative coherent structures in Kerr nonlinear optical microresonators, whose integrated dispersion exceeds the free-spectral range. We demonstrate that the presence of any periodic modulation along the resonator's circumference, such as periodically varying dispersion, can excite higher-order comb structures. We explore the outco… ▽ More We theoretically and experimentally investigate the formation of dissipative coherent structures in Kerr nonlinear optical microresonators, whose integrated dispersion exceeds the free-spectral range. We demonstrate that the presence of any periodic modulation along the resonator's circumference, such as periodically varying dispersion, can excite higher-order comb structures. We explore the outcomes of coherent microcomb generation in both cases of anomalous and normal dispersion. We are able to access this regime in microresonators via the high peak power of synchronous pulse-driving. For solitons in anomalous dispersion, we observe the formation of higher-order phase-matched dispersive waves (`Kelly-like' sidebands), where the folded dispersion crosses the frequency comb grid. In normal dispersion, we see the coexistence of switching wave fronts with Faraday instability-induced period-doubling patterns, manifesting as powerful satellite microcombs highly separated either side of the core microcomb while sharing the same repetition rate. This regime of dispersion-modulated phase matching opens a dimension of Kerr cavity physics and microcomb generation, particularly for the spectral extension and tuneability of microcombs in normal dispersion. △ Less

Submitted 20 May, 2022; originally announced May 2022.

Comments: Supplementary information will be added to posting in coming days

Nonreciprocal light propagation induced by a subwavelength spinning cylinder

Authors: Zheng Yang, Yuqiong Cheng, Neng Wang, Yuntian Chen, Shubo Wang

Abstract: Nonreciprocal optical devices have broad applications in light manipulations for communications and sensing. Non-magnetic mechanisms of optical nonreciprocity are highly desired for high-frequency on-chip applications. Here, we investigate the nonreciprocal properties of light propagation in a dielectric waveguide induced by a subwavelength spinning cylinder. We find that the chiral modes of the c… ▽ More Nonreciprocal optical devices have broad applications in light manipulations for communications and sensing. Non-magnetic mechanisms of optical nonreciprocity are highly desired for high-frequency on-chip applications. Here, we investigate the nonreciprocal properties of light propagation in a dielectric waveguide induced by a subwavelength spinning cylinder. We find that the chiral modes of the cylinder can give rise to unidirectional coupling with the waveguide via the transverse spin-orbit interaction, leading to different transmissions for guided wave propagating in opposite directions and thus optical isolation. We reveal the dependence of the nonreciprocal properties on various system parameters including mode order, spinning speed, and coupling distance. The results show that higher-order chiral modes and larger spinning speed generally give rise to stronger nonreciprocity, and there exists an optimal cylinder-waveguide coupling distance where the optical isolation reaches the maximum. Our work contributes to the understanding of nonreciprocity in subwavelength moving structures and can find applications in integrated photonic circuits, topological photonics, and novel metasurfaces. △ Less

Submitted 23 April, 2022; originally announced April 2022.

Comments: 14 pages, 6 figures

Journal ref: Optics Express 30, 27993 (2022)

Quasi-static magnetic compression of field-reversed configuration plasma: Amended scalings and limits from two-dimensional MHD equilibrium

Authors: Abba Alhaji Bala, ** Zhu, Haolong Li, Yonghua Ding, Jiaxing Liu, Sui Wan, Ying He, Da Li, Nengchao Wang, Bo Rao, Zhijiang Wang

Abstract: In this work, several key scaling laws of the quasi-static magnetic compression of field reversed configuration (FRC) plasma [Spencer, Tuszewski, and Linford, 1983] are amended from a series of 2D FRC MHD equilibriums numerically obtained using the Grad-Shafranov equation solver NIMEQ. Based on the new scaling for the elongation and the magnetic fields at the separatrix and the wall, the empirical… ▽ More In this work, several key scaling laws of the quasi-static magnetic compression of field reversed configuration (FRC) plasma [Spencer, Tuszewski, and Linford, 1983] are amended from a series of 2D FRC MHD equilibriums numerically obtained using the Grad-Shafranov equation solver NIMEQ. Based on the new scaling for the elongation and the magnetic fields at the separatrix and the wall, the empirically stable limits for the compression ratio, the fusion gain, and the neutron yield are evaluated, which may serve as a more accurate estimate for the upper ceiling of performance from the magnetic compression of FRC plasma as a potential fusion energy as well as neutron source devices. △ Less

Submitted 17 April, 2022; originally announced April 2022.

A photonic integrated circuit based erbium-doped amplifier

Authors: Yang Liu, Zheru Qiu, Xinru Ji, Jijun He, Johann Riemensberger, Martin Hafermann, Rui Ning Wang, Junqiu Liu, Carsten Ronning, Tobias J. Kippenberg

Abstract: Erbium-doped fiber amplifiers have revolutionized long-haul optical communications and laser technology. Erbium ions could equally provide a basis for efficient optical amplification in photonic integrated circuits. However, this approach has thus far remained impractical due to insufficient output power. Here, we demonstrate a photonic integrated circuit based erbium amplifier reaching 145 mW out… ▽ More Erbium-doped fiber amplifiers have revolutionized long-haul optical communications and laser technology. Erbium ions could equally provide a basis for efficient optical amplification in photonic integrated circuits. However, this approach has thus far remained impractical due to insufficient output power. Here, we demonstrate a photonic integrated circuit based erbium amplifier reaching 145 mW output power and more than 30 dB small-signal gain -- on par with commercial fiber amplifiers and beyond state-of-the-art III-V heterogeneously integrated semiconductor amplifiers. We achieve this by applying ion implantation to recently emerged ultralow-loss Si3N4 photonic integrated circuits with meter-scale-length waveguides. We utilize the device to increase by 100-fold the output power of soliton microcombs, required for low-noise photonic microwave generation or as a source for wavelength-division multiplexed optical communications. Endowing Si3N4 photonic integrated circuits with gain enables the miniaturization of a wide range of fiber-based devices such as high-pulse-energy femtosecond mode-locked lasers. △ Less

Submitted 12 April, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Comments: 25 pages, 16 figures

Journal ref: Science, 376 (6599), 1309-1313 (2022)