-
A diamond anvil microassembly for Joule heating and electrical measurements up to 150 GPa and 4000 K
Authors:
Zachary M. Geballe,
Suzy M. Vitale,
**g Yang,
Francesca Miozzi,
Vasilije V. Dobrosavljevic,
Michael J. Walter
Abstract:
When diamond anvil cell (DAC) sample chambers are outfitted with both thermal insulation and electrodes, two cutting-edge experimental methods are enabled: Joule heating with spectroradiometric temperature measurement, and electrical resistance measurements of samples heated to thousands of kelvin. The accuracy of temperature and resistance measurements, however, often suffers from poor control of…
▽ More
When diamond anvil cell (DAC) sample chambers are outfitted with both thermal insulation and electrodes, two cutting-edge experimental methods are enabled: Joule heating with spectroradiometric temperature measurement, and electrical resistance measurements of samples heated to thousands of kelvin. The accuracy of temperature and resistance measurements, however, often suffers from poor control of the shape and location of the sample, electrodes, and thermal insulation. Here, we present a recipe for the reproducible and precise fabrication of DAC sample, electrodes, and thermal insulation using a three-layer microassembly. The microassembly contains two potassium chloride thermal insulation layers, four electrical leads, a sample, and a buttressing layer made of polycrystalline alumina. The sample, innermost electrodes, and buttress layer are fabricated by focused-ion-beam milling. Three iron samples are presented as proof of concept. Each is successfully compressed and pulsed Joule heated while maintaining a four-point probe configuration. The highest pressure-temperature condition achieved is $\sim 150$ GPa and $\sim 4000$ K.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
Spectroradiometry with sub-microsecond time resolution using multianode photomultiplier tube assemblies
Authors:
Zachary M. Geballe,
Francesca Miozzi,
Chris F. Anto,
Javier Rojas,
**g Yang,
Michael J. Walter
Abstract:
Accurate and precise measurements of spectroradiometric temperature are crucial for many high pressure experiments that use diamond anvil cells or shock waves. In experiments with sub-millisecond timescales, specialized detectors such as streak cameras or photomultiplier tubes are required to measure temperature. High accuracy and precision are difficult to attain, especially at temperatures below…
▽ More
Accurate and precise measurements of spectroradiometric temperature are crucial for many high pressure experiments that use diamond anvil cells or shock waves. In experiments with sub-millisecond timescales, specialized detectors such as streak cameras or photomultiplier tubes are required to measure temperature. High accuracy and precision are difficult to attain, especially at temperatures below 3000 K. Here we present a new spectroradiometry system based on multianode photomultiplier tube technology and passive readout circuitry that yields a 0.24 $μ$s rise-time for each channel. Temperature is measured using five color spectroradiometry. During high pressure pulsed Joule heating experiments in a diamond anvil cell, we document measurement precision to be $\pm 30$ K at temperatures as low as 2000 K during single-shot heating experiments with $0.6$ $μ$s time-resolution. Ambient pressure melting tests using pulsed Joule heating indicate that the accuracy is $\pm 80$ K in the temperature range 1800-2700 K.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
A broadband pulse amplifier for Joule heating experiments in diamond anvil cells
Authors:
Zachary M. Geballe,
Joseph Lai,
Michael J. Walter
Abstract:
Decades of measurements of the thermophysical properties of hot metals show that pulsed Joule heating is an effective method to heat solid and liquid metals that are chemically reactive or difficult to contain. In order to extend such measurements to megabar pressures, pulsed heating methods must be integrated with diamond anvil cells. We report the design and characterization of a new pulse ampli…
▽ More
Decades of measurements of the thermophysical properties of hot metals show that pulsed Joule heating is an effective method to heat solid and liquid metals that are chemically reactive or difficult to contain. In order to extend such measurements to megabar pressures, pulsed heating methods must be integrated with diamond anvil cells. We report the design and characterization of a new pulse amplifier that can heat $\sim 5$ to $50$ $μ$m-diameter metal wires to 1000s of kelvin at megabar pressures using diamond anvil cells. Pulse durations and peak currents can each be varied over 3 orders of magnitude, from 5 $μ$s to 10 ms and 0.2 to 200 A. The pulse amplifier is integrated with a current probe. Two voltage probes attached to the body of a diamond anvil cell can be used to measure voltage in a four point probe geometry. The accuracy of four point probe resistance measurements for a dummy sample with 0.1 $Ω$ resistance are typically better than $5 \%$ at all times from 2 $μ$s to 10 ms after the beginning of the pulse.
△ Less
Submitted 30 October, 2023; v1 submitted 23 October, 2023;
originally announced October 2023.
-
Compositional evolution during rocky protoplanet accretion
Authors:
Philip J. Carter,
Zoë M. Leinhardt,
Tim Elliott,
Michael J. Walter,
Sarah T. Stewart
Abstract:
The Earth appears non-chondritic in its abundances of refractory lithophile elements, posing a significant problem for our understanding of its formation and evolution. It has been suggested that this non-chondritic composition may be explained by collisional erosion of differentiated planetesimals of originally chondritic composition. In this work, we present N-body simulations of terrestrial pla…
▽ More
The Earth appears non-chondritic in its abundances of refractory lithophile elements, posing a significant problem for our understanding of its formation and evolution. It has been suggested that this non-chondritic composition may be explained by collisional erosion of differentiated planetesimals of originally chondritic composition. In this work, we present N-body simulations of terrestrial planet formation that track the growth of planetary embryos from planetesimals. We simulate evolution through the runaway and oligarchic growth phases under the Grand Tack model and in the absence of giant planets. These simulations include a state-of-the-art collision model which allows multiple collision outcomes, such as accretion, erosion, and bouncing events, that enables tracking of the evolving core mass fraction of accreting planetesimals. We show that the embryos grown during this intermediate stage of planet formation exhibit a range of core mass fractions, and that with significant dynamical excitation, enough mantle can be stripped from growing embryos to account for the Earth's non-chondritic Fe/Mg ratio. We also find that there is a large diversity in the composition of remnant planetesimals, with both iron-rich and silicate-rich fragments produced via collisions.
△ Less
Submitted 24 September, 2015;
originally announced September 2015.
-
A Collisional Origin to Earth's Non-chondritic Composition?
Authors:
Amy Bonsor,
Zoë M. Leinhardt,
Philip J. Carter,
Tim Elliott,
Michael J. Walter,
Sarah T. Stewart
Abstract:
Several lines of evidence indicate a non-chondritic composition for Bulk Earth. If Earth formed from the accretion of chondritic material, its non-chondritic composition, in particular the super-chondritic 142Nd/144Nd and low Mg/Fe ratios, might be explained by the collisional erosion of differentiated planetesimals during its formation. In this work we use an N-body code, that includes a state-of…
▽ More
Several lines of evidence indicate a non-chondritic composition for Bulk Earth. If Earth formed from the accretion of chondritic material, its non-chondritic composition, in particular the super-chondritic 142Nd/144Nd and low Mg/Fe ratios, might be explained by the collisional erosion of differentiated planetesimals during its formation. In this work we use an N-body code, that includes a state-of-the-art collision model, to follow the formation of protoplanets, similar to proto-Earth, from differentiated planetesimals (> 100 km) up to isolation mass (> 0.16 M_Earth). Collisions between differentiated bodies have the potential to change the core-mantle ratio of the accreted protoplanets. We show that sufficient mantle material can be stripped from the colliding bodies during runaway and oligarchic growth, such that the final protoplanets could have Mg/Fe and Si/Fe ratios similar to that of bulk Earth, but only if Earth is an extreme case and the core is assumed to contain 10% silicon by mass. This may indicate an important role for collisional differentiation during the giant impact phase if Earth formed from chondritic material.
△ Less
Submitted 13 October, 2014;
originally announced October 2014.