Showing 1–42 of 42 results for author: Walker, P

Confronting the thermodynamics knowledge gap: A short course on computational thermodynamics in Julia

Authors: Luc Paoli, Pavan K. Inguva, Andrew J. Haslam, Pierre J. Walker

Abstract: Computational elements in thermodynamics have become increasingly important in contemporary chemical-engineering research and practice. However, traditional thermodynamics instruction provides little exposure to computational thermodynamics, leaving students ill-equipped to engage with the state-of-the-art deployed in industry and academia. The recent rise of easy-to-use open-source thermodynamic… ▽ More Computational elements in thermodynamics have become increasingly important in contemporary chemical-engineering research and practice. However, traditional thermodynamics instruction provides little exposure to computational thermodynamics, leaving students ill-equipped to engage with the state-of-the-art deployed in industry and academia. The recent rise of easy-to-use open-source thermodynamic codes presents an opportunity for educators to help bridge this gap. In this work, we present a short course that was developed and rolled-out using the Clapeyron.jl package, the material of which is all openly available on GitHub. The course can serve as a foundation for others to similarly integrate computational material in thermodynamics education. The course is structured into three sections. Section one serves as a refresher and covers core material in numerical methods and thermodynamics. Section two introduces a range of thermodynamic models such as activity-coefficient models and cubic equations of state, outlining their implementation. In section three the focus is moved to deployment, guiding students on how to implement computational-thermodynamics methods covering volume solvers, saturation solvers, chemical-stability analysis and flash problems. In a pilot study conducted with both undergraduate and graduate students, participants found the material engaging and highly relevant to their chemical-engineering education. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Exciton-polaritons in GaAsbased slab waveguide photonic crystals

Authors: C. E. Whittaker, T. Isoniemi, S. Lovett, P. M. Walker, S. Kolodny, V. Kozin, I. V. Iorsh, I. Farrer, D. A. Ritchie, M. S. Skolnick, D. N. Krizhanovskii

Abstract: We report the observation of band gaps for low loss exciton-polaritons propagating outside the light cone in GaAs-based planar waveguides patterned into two-dimensional photonic crystals. By etching square lattice arrays of shallow holes into the uppermost layer of our structure, we open gaps on the order of 10 meV in the photonic mode dispersion, whose size and light-matter composition can be tun… ▽ More We report the observation of band gaps for low loss exciton-polaritons propagating outside the light cone in GaAs-based planar waveguides patterned into two-dimensional photonic crystals. By etching square lattice arrays of shallow holes into the uppermost layer of our structure, we open gaps on the order of 10 meV in the photonic mode dispersion, whose size and light-matter composition can be tuned by proximity to the strongly coupled exciton resonance. We demonstrate gaps ranging from almost fully photonic to highly excitonic. Opening a gap in the exciton-dominated part of the polariton spectrum is a promising first step towards the realization of quantum-Hall-like states arising from topologically nontrivial hybridization of excitons and photons. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Comments: published in Appl. Phys. Lett. in 2021

Journal ref: Appl. Phys. Lett. 119, 181101 (2021)

Confidence Interval and Uncertainty Propagation Analysis of SAFT-type Equations of State

Authors: Pierre J. Walker, Simon Mueller, Irina Smirnova

Abstract: Thermodynamic models and, in particular, SAFT-type equations are vital in characterizing complex systems. This paper presents a framework for sampling parameter distributions in PC-SAFT and SAFT-VR Mie equations of state to understand parameter confidence intervals and correlations. We identify conserved quantities contributing to significant correlations. Comparing the equations of state, we find… ▽ More Thermodynamic models and, in particular, SAFT-type equations are vital in characterizing complex systems. This paper presents a framework for sampling parameter distributions in PC-SAFT and SAFT-VR Mie equations of state to understand parameter confidence intervals and correlations. We identify conserved quantities contributing to significant correlations. Comparing the equations of state, we find that additional parameters introduced in the SAFT-VR Mie equation increase relative uncertainties (1\%-2\% to 3\%-4\%) and introduce more correlations. When incorporating association through additional parameters, relative uncertainties increase, but correlations slightly decrease. We investigate how uncertainties propagate to derived properties and observe small uncertainties for that data with which the parameters were regressed, especially for saturated-liquid volumes. However, extrapolating to saturated-vapour volumes yields larger uncertainties due to the larger isothermal compressibility. Near the critical point, uncertainties in saturated volumes diverge due to increased sensitivity of the isothermal compressibility to parameter uncertainties. This effect significantly impacts bulk properties, particularly isobaric heat capacity, where uncertainties near the critical point become extremely large, even when these uncertainties are small. We emphasize that even small uncertainties near the critical point lead to divergences in predicted properties. △ Less

Submitted 31 July, 2023; originally announced August 2023.

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Observation of Zitterbewegung in photonic microcavities

Authors: Seth Lovett, Paul M. Walker, Alexey Osipov, Alexey Yulin, Pooja Uday Naik, Charles E. Whittaker, Ivan A. Shelykh, Maurice S. Skolnick, Dmitry N. Krizhanovskii

Abstract: We present and experimentally study the effects of the photonic spin-orbit coupling on real space propagetion of polariton wavepackets in planar semiconductor microcavities and polaritonic analogs of graphene. In particular, we demonstrate the appearance of an analog Zitterbewegung effect, a term which translates as 'trembling motion' in english, which was originally proposed for relativistic Dira… ▽ More We present and experimentally study the effects of the photonic spin-orbit coupling on real space propagetion of polariton wavepackets in planar semiconductor microcavities and polaritonic analogs of graphene. In particular, we demonstrate the appearance of an analog Zitterbewegung effect, a term which translates as 'trembling motion' in english, which was originally proposed for relativistic Dirac electrons and consists of the oscillations of the center of mass of a wavepacket in the direction perpendicular to its propagation. For a planar microcavity we observe regular Zitterbewegung oscillations whose amplitude and period depend on the wavevector of the polaritons. We then extend these results to a honeycomb lattice of coupled microcavity resonators. Compared to the planar cavity such lattices are inherently more tuneable and versatile, allowing simulation of the Hamilitonians of a wide range of important physical systems. We observe an oscillation pattern related to the presence of the spin-split Dirac cones in the dispersion. In both cases the experimentally observed oscillations are in good agreement with theoretical modelling and independently measured bandstructure parameters, providing strong evidence for the observation of Zitterbewegung. △ Less

Submitted 10 February, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Polariton lasing in AlGaN microring with GaN/AlGaN quantum wells

Authors: Anthonin Delphan, Maxim N. Makhonin, Tommi Isoniemi, Paul M. Walker, Maurice S. Skolnick, Dmitry N. Krizhanovskii, Dmitry V. Skryabin, Jean-François Carlin, Nicolas Grandjean, Raphaël Butté

Abstract: Microcavity polaritons are strongly interacting hybrid light-matter quasiparticles, which are promising for the development of novel light sources and active photonic devices. Here, we report polariton lasing in the UV spectral range in microring resonators based on GaN/AlGaN slab waveguides, with experiments carried out from 4 K up to room temperature. Stimulated polariton relaxation into multipl… ▽ More Microcavity polaritons are strongly interacting hybrid light-matter quasiparticles, which are promising for the development of novel light sources and active photonic devices. Here, we report polariton lasing in the UV spectral range in microring resonators based on GaN/AlGaN slab waveguides, with experiments carried out from 4 K up to room temperature. Stimulated polariton relaxation into multiple ring resonator modes is observed, which exhibit threshold-like dependence of the emission intensity with pulse energy. The strong exciton-photon coupling regime is confirmed by the significant reduction of the free spectral range with energy and the blueshift of the exciton-like modes with increasing pulse energy. Importantly, the exciton emission shows no broadening with power, further confirming that lasing is observed at electron-hole densities well below the Mott transition. Overall, our work paves the way towards development of novel UV devices based on the high-speed slab waveguide polariton geometry operating up to room temperature with potential to be integrated into complex photonic circuits. △ Less

Submitted 28 October, 2022; originally announced October 2022.

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Mass Testing and Characterization of 20-inch PMTs for JUNO

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, Joao Pedro Athayde Marcondes de Andre, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli , et al. (541 additional authors not shown)

Abstract: Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic… ▽ More Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK). △ Less

Submitted 17 September, 2022; v1 submitted 17 May, 2022; originally announced May 2022.

Calibration Strategy of the JUNO-TAO Experiment

Authors: Hangkun Xu, Angel Abusleme, Nikolay V. Anfimov, Stéphane Callier, Agustin Campeny, Guofu Cao, Jun Cao, Cedric Cerna, Yu Chen, Alexander Chepurnov, Yayun Ding, Frederic Druillole, Andrea Fabbri, Zhengyong Fei, Maxim Gromov, Miao He, Wei He, Yuanqiang He, Joseph yk Hor, Shao**g Hou, Jianrun Hu, Jun Hu, Cédric Huss, Xiaolu Ji, Tao Jiang , et al. (46 additional authors not shown)

Abstract: The Taishan Antineutrino Observatory (JUNO-TAO, or TAO) is a satellite detector for the Jiangmen Underground Neutrino Observatory (JUNO). Located near the Taishan reactor, TAO independently measures the reactor's antineutrino energy spectrum with unprecedented energy resolution. To achieve this goal, energy response must be well calibrated. Using the Automated Calibration Unit (ACU) and the Cable… ▽ More The Taishan Antineutrino Observatory (JUNO-TAO, or TAO) is a satellite detector for the Jiangmen Underground Neutrino Observatory (JUNO). Located near the Taishan reactor, TAO independently measures the reactor's antineutrino energy spectrum with unprecedented energy resolution. To achieve this goal, energy response must be well calibrated. Using the Automated Calibration Unit (ACU) and the Cable Loop System (CLS) of TAO, multiple radioactive sources are deployed to various positions in the detector to perform a precise calibration of energy response. The non-linear energy response can be controlled within 0.6% with different energy points of these radioactive sources. It can be further improved by using $^{12}\rm B$ decay signals produced by cosmic muons. Through the energy non-uniformity calibration, residual non-uniformity is less than 0.2%. The energy resolution degradation and energy bias caused by the residual non-uniformity can be controlled within 0.05% and 0.3%, respectively. In addition, the stability of other detector parameters, such as the gain of each silicon photo-multiplier, can be monitored with a special ultraviolet LED calibration system. △ Less

Submitted 29 May, 2022; v1 submitted 7 April, 2022; originally announced April 2022.

Clapeyron.jl: An extensible, open-source fluid-thermodynamics toolkit

Authors: Pierre J. Walker, Hon-Wa Yew, Andrés Riedemann

Abstract: Thermodynamic models are often vital when characterising complex systems, particularly natural gas, electrolyte, polymer, pharmaceutical and biological systems. However, their implementations have historically been abstruse and cumbersome, and as such, the only options available were black-box commercial tools. In this article, we present Clapeyron.jl: a pioneering attempt at an open-source fluid-… ▽ More Thermodynamic models are often vital when characterising complex systems, particularly natural gas, electrolyte, polymer, pharmaceutical and biological systems. However, their implementations have historically been abstruse and cumbersome, and as such, the only options available were black-box commercial tools. In this article, we present Clapeyron.jl: a pioneering attempt at an open-source fluid-thermodynamics toolkit to build and make use of thermodynamic models. This toolkit is built in Julia, a modern language for scientific computing known for its ease of use, extensibility, and first-class support for differentiable programming. We currently support more models than any package available, including standard cubic (SRK, PR, PSRK, etc.), activity-coefficient (NRTL, UNIFAC, etc.), COSMO-based, and the venerable SAFT equations. The property-estimation methods supported are extensive, including bulk, VLE, LLE, VLLE and critical properties. With Clapeyron.jl, researchers and enthusiasts alike will be able to focus on the application and worry less about the implementation. △ Less

Submitted 25 January, 2022; v1 submitted 21 January, 2022; originally announced January 2022.

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures

Few-photon all-optical phase rotation in a quantum-well micropillar cavity

Authors: Tintu Kuriakose, Paul M. Walker, Toby Dowling, Oleksandr Kyriienko, Ivan A. Shelykh, Phillipe St-Jean, Nicola Carlon Zambon, Aristide Lemaître, Isabelle Sagnes, Luc Legratiet, Abdelmounaim Harouri, Sylvain Ravets, Maurice S. Skolnick, Alberto Amo, Jacqueline Bloch, Dmitry N. Krizhanovskii

Abstract: Photonic platforms are an excellent setting for quantum technologies because weak photon-environment coupling ensures long coherence times. The second key ingredient for quantum photonics is interactions between photons, which can be provided by optical nonlinearities in the form of cross-phase-modulation (XPM). This approach underpins many proposed applications in quantum optics and information p… ▽ More Photonic platforms are an excellent setting for quantum technologies because weak photon-environment coupling ensures long coherence times. The second key ingredient for quantum photonics is interactions between photons, which can be provided by optical nonlinearities in the form of cross-phase-modulation (XPM). This approach underpins many proposed applications in quantum optics and information processing, but achieving its potential requires strong single-photon-level nonlinear phase shifts and also scalable nonlinear elements. In this work we show that the required nonlinearity can be provided by exciton-polaritons in micropillars with embedded quantum wells. These combine the strong interactions of excitons with the scalability of micrometer-sized emitters. We observe XPM up to $3 \pm 1$ mrad per particle using laser beams attenuated to below single photon average intensity. With our work serving as a first step** stone, we lay down a route for quantum information processing in polaritonic lattices. △ Less

Submitted 25 June, 2021; originally announced June 2021.

Development of a large-area timing and position-sensitive foil-MCP detector for mass measurements at the Rare-RI Ring in RIKEN

Authors: Z. Ge, H. F. Li, T. Uesaka, S. Naimi, D. Nagae, Y. Abe, S. Omika, F. Suzaki, Y. Yamaguchi, M. Wakasugi, T. Yamaguchi, K. Wakayama, H. Arakawa, K. Inomata, K. Nishimuro, T. Kobayashi, S. Hosoi, Y. Inada, A. Ozawa, S. Suzuki, T. Moriguchi, D. Kamioka, M. Mukai, M. Amano, A. Kitagawa , et al. (6 additional authors not shown)

Abstract: To achieve high precision and accuracy for mass measurements of exotic nuclei by Time-of-flight (TOF) methods: high-resolution beam-line magnetic-rigidity time-of-flight (B$ρ$-TOF) and in-ring isochronous mass spectrometry (IMS), a large-area electrostatic detector which possesses high position resolution and good timing resolution at the same time is developed at the Rare-RI Ring in RIBF, RIKEN N… ▽ More To achieve high precision and accuracy for mass measurements of exotic nuclei by Time-of-flight (TOF) methods: high-resolution beam-line magnetic-rigidity time-of-flight (B$ρ$-TOF) and in-ring isochronous mass spectrometry (IMS), a large-area electrostatic detector which possesses high position resolution and good timing resolution at the same time is developed at the Rare-RI Ring in RIBF, RIKEN Nishina Center, Japan. Besides TOF mass measurements, the detector system will also be used for heavy ion beam trajectory monitoring or momentum measurements for both beam-line and in-ring at the Rare-RI Ring. The position and timing measurements of heavy ions are performed by detecting the secondary electrons (SEs) emitted from a conversion foil during the passage of the ion. The SEs are accelerated and bent with an angle of $90^{\circ}$ by electrostatic fields onto a micro-channel-plate (MCP) electron multiplier which is coupled with a position-sensitive delay-line anode. The dependence of the timing and position resolution on applied high voltages of the detector potential plates has been studied systematically via simulation and experimentally. An isochronous condition of secondary electron transmission in the electrostatic field of the detector is chosen to optimize the structure of the detector for high performance. The best achieved timing resolution is less than 50 ps (in $σ$) and position resolution $\sim$ 1 mm (in $σ$) for 2 dimensions, respectively. The overall efficiency is $\sim$ 95$\%$ for heavy ion beam and $\sim$ 75$\%$ for $α$ particle from $^{241}$Am source. △ Less

Submitted 12 December, 2021; v1 submitted 15 June, 2021; originally announced June 2021.

Comments: Coauthor asked to withdraw this paper as he did no allow it to publish. There are no agreements on one figure

The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld , et al. (582 additional authors not shown)

Abstract: The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of… ▽ More The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 32 pages, 22 figures

Mass production and characterization of 3-inch PMTs for the JUNO experiment

Authors: Chuanya Cao, Jilei Xu, Miao He, Angel Abusleme, Mathieu Bongrand, Clément Bordereau, Dominique Breton, Anatael Cabrera, Agustin Campeny, Cédric Cerna, Haoqiang Chen, Po-An Chen, Gérard Claverie, Selma Conforti Di Lorenzo, Christophe De La Taille, Frédéric Druillole, Amélie Fournier, Marco Grassi, Xiaofei Gu, Michael Haacke, Yang Han, Patrick Hellmuth, Yuekun Heng, Rafael Herrera, Yee Hsiung , et al. (42 additional authors not shown)

Abstract: 26,000 3-inch photomultiplier tubes (PMTs) have been produced for Jiangmen Underground Neutrino Observatory (JUNO) by the Hainan Zhanchuang Photonics Technology Co., Ltd (HZC) company in China and passed all acceptance tests with only 15 tubes rejected. The mass production began in 2018 and elapsed for about 2 years at a rate of $\sim$1,000~PMTs per month. The characterization of the PMTs was perf… ▽ More 26,000 3-inch photomultiplier tubes (PMTs) have been produced for Jiangmen Underground Neutrino Observatory (JUNO) by the Hainan Zhanchuang Photonics Technology Co., Ltd (HZC) company in China and passed all acceptance tests with only 15 tubes rejected. The mass production began in 2018 and elapsed for about 2 years at a rate of $\sim$1,000~PMTs per month. The characterization of the PMTs was performed in the factory concurrently with production as a joint effort between HZC and JUNO. Fifteen performance parameters were tracked at different sampling rates, and novel working strategies were implemented to improve quality assurance. This constitutes the largest sample of 3-inch PMTs ever produced and studied in detail to date. △ Less

Submitted 26 February, 2021; v1 submitted 23 February, 2021; originally announced February 2021.

Calibration Strategy of the JUNO Experiment

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, Thilo Birkenfeld , et al. (571 additional authors not shown)

Abstract: We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca… ▽ More We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination. △ Less

Submitted 20 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Ultrafast-nonlinear ultraviolet pulse modulation in an AlInGaN polariton waveguide operating up to room temperature

Authors: Davide Maria Di Paola, Paul M. Walker, Ruggero P. A. Emmanuele, Alexey V. Yulin, Joachim Ciers, Zaffar Zaidi, Jean-François Carlin, Nicolas Grandjean, Ivan Shelykh, Maurice S. Skolnick, R. Butté, Dmitry N. Krizhanovskii

Abstract: Ultrafast nonlinear photonics enables a host of applications in advanced on-chip spectroscopy and information processing. These rely on a strong intensity dependent (nonlinear) refractive index capable of modulating optical pulses on sub-picosecond timescales and on length scales suitable for integrated photonics. Currently there is no platform that can provide this for the UV spectral range where… ▽ More Ultrafast nonlinear photonics enables a host of applications in advanced on-chip spectroscopy and information processing. These rely on a strong intensity dependent (nonlinear) refractive index capable of modulating optical pulses on sub-picosecond timescales and on length scales suitable for integrated photonics. Currently there is no platform that can provide this for the UV spectral range where broadband spectra generated by nonlinear modulation can pave the way to new on-chip ultrafast (bio-) chemical spectroscopy devices. We demonstrate the giant nonlinearity of UV hybrid light-matter states (exciton-polaritons) up to room temperature in an AlInGaN waveguide. We experimentally measure ultrafast nonlinear spectral broadening of UV pulses in a compact 100 $μ$m long device and deduce a nonlinearity 1000 times that in common UV nonlinear materials and comparable to non-UV polariton devices. Our demonstration promises to underpin a new generation of integrated UV nonlinear light sources for advanced spectroscopy and measurement. △ Less

Submitted 22 June, 2021; v1 submitted 4 September, 2020; originally announced September 2020.

Journal ref: Nat. Commun. 12, 3504 (2021)

Introducing students to research codes: A short course on solving partial differential equations in Python

Authors: Pavan Inguva, Vijesh J. Bhute, Thomas N. H. Cheng, Pierre J. Walker

Abstract: Recent releases of open-source research codes and solvers for numerically solving partial differential equations in Python present a great opportunity for educators to integrate these codes into the classroom in a variety of ways. The ease with which a problem can be implemented and solved using these codes reduce the barrier to entry for users. We demonstrate how one of these codes,FiPy, can be i… ▽ More Recent releases of open-source research codes and solvers for numerically solving partial differential equations in Python present a great opportunity for educators to integrate these codes into the classroom in a variety of ways. The ease with which a problem can be implemented and solved using these codes reduce the barrier to entry for users. We demonstrate how one of these codes,FiPy, can be introduced to students through a short course using progression as the guiding philosophy. Four exercises of increasing complexity were developed. Basic concepts from more advanced numerical methods courses are also introduced at appropriate points. To further engage students, we demonstrate how an open research problem can be readily implemented and also incorporate the use of ParaView to post-process their results. Student engagement and learning outcomes were evaluated through a pre and post-course survey and a focus group discussion. Students broadly found the course to be engaging and useful with the ability to easily visualise the solution to PDEs being greatly valued. Due to the introductory nature of the course, due care in terms of set-up and the design of learning activities during the course is essential. This course, if integrated with appropriate level of support, can encourage students to use the provided codes and improve their understanding of concepts used in numerical analysis and PDEs. △ Less

Submitted 26 August, 2020; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: 12 pages, 9 figures. Fixed references

MSC Class: 97M11 (Primary); 35A04(Secondary)

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

Authors: Daya Bay, JUNO collaborations, :, A. Abusleme, T. Adam, S. Ahmad, S. Aiello, M. Akram, N. Ali, F. P. An, G. P. An, Q. An, G. Andronico, N. Anfimov, V. Antonelli, T. Antoshkina, B. Asavapibhop, J. P. A. M. de André, A. Babic, A. B. Balantekin, W. Baldini, M. Baldoncini, H. R. Band, A. Barresi, E. Baussan , et al. (642 additional authors not shown)

Abstract: To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were… ▽ More To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Comments: 13 pages, 8 figures

Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (572 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid s… ▽ More The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Comments: 29 pages, 14 plots, 7 tables

TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (568 additional authors not shown)

Abstract: The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future re… ▽ More The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 134 pages, 114 figures

Electrically pumped WSe$_2$-based light-emitting van der Waals heterostructures embedded in monolithic dielectric microcavities

Authors: O. Del Pozo-Zamudio, A. Genco, S. Schwarz, F. Withers, P. M. Walker, T. Godde, R. C. Schofield, A. P. Rooney, E. Prestat, K. Watanabe, T. Taniguchi, C. Clark, S. J. Haigh, D. N. Krizhanovskii, K. S. Novoselov, A. I. Tartakovskii

Abstract: Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integr… ▽ More Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures. △ Less

Submitted 4 June, 2020; v1 submitted 15 November, 2019; originally announced November 2019.

Journal ref: O. Del Pozo-Zamudio et al. 2D materials 7 (2020) 3, 031006

Optical cages made of graphitic frameworks

Authors: J. P. Walker, H. Grebel

Abstract: In pursuit of infrared (IR) radiation absorbers, we examine quasicrystal structures made of graphite wires. An array of graphitic cages and cage-within-cage, and whose overall dimensions is smaller than the radiation wavelength exhibit a flat absorption spectrum, A~0.83 between 10-30 microns and a quality loss factor of L~0.83 (L=A/Q, with Q, the quality factor). Simulations at microwave frequenci… ▽ More In pursuit of infrared (IR) radiation absorbers, we examine quasicrystal structures made of graphite wires. An array of graphitic cages and cage-within-cage, and whose overall dimensions is smaller than the radiation wavelength exhibit a flat absorption spectrum, A~0.83 between 10-30 microns and a quality loss factor of L~0.83 (L=A/Q, with Q, the quality factor). Simulations at microwave frequencies show multiple absorption lines. In the case of a cage within cage, energy is funneled towards the inner cage which result in a rather hot structure. Applications are envisioned as anti-fogging surfaces, EM shields and energy harvesting. △ Less

Submitted 2 July, 2020; v1 submitted 19 July, 2019; originally announced July 2019.

Comments: 7 pages 5 figures

Nonlinear polaritons in monolayer semiconductor coupled to optical bound states in the continuum

Authors: V. Kravtsov, E. Khestanova, F. A. Benimetskiy, T. Ivanova, A. K. Samusev, I. S. Sinev, D. Pidgayko, A. M. Mozharov, I. S. Mukhin, M. S. Lozhkin, Y. V. Kapitonov, A. S. Brichkin, V. D. Kulakovskii, I. A. Shelykh, A. I. Tartakovskii, P. M. Walker, M. S. Skolnick, D. N. Krizhanovskii, I. V. Iorsh

Abstract: Optical bound states in the continuum (BICs) provide a way to engineer very narrow resonances in photonic crystals. The extended interaction time in such systems is particularly promising for enhancement of nonlinear optical processes and development of the next generation of active optical devices. However, the achievable interaction strength is limited by the purely photonic character of optical… ▽ More Optical bound states in the continuum (BICs) provide a way to engineer very narrow resonances in photonic crystals. The extended interaction time in such systems is particularly promising for enhancement of nonlinear optical processes and development of the next generation of active optical devices. However, the achievable interaction strength is limited by the purely photonic character of optical BICs. Here, we mix optical BIC in a photonic crystal slab with excitons in atomically thin semiconductor MoSe$_2$ to form nonlinear exciton-polaritons with a Rabi splitting of 27~meV, exhibiting large interaction-induced spectral blueshifts. The asymptotic BIC-like suppression of polariton radiation into far-field towards the BIC wavevector, in combination with effective reduction of excitonic disorder through motional narrowing, results in small polariton linewidths below 3~meV. Together with strongly wavevector-dependent Q-factor, this provides for enhancement and control of polariton--polariton interactions and resulting nonlinear optical effects, paving the way towards tunable BIC-based polaritonic devices for sensing, lasing, and nonlinear optics. △ Less

Submitted 9 October, 2019; v1 submitted 31 May, 2019; originally announced May 2019.

Effect of photonic spin-orbit coupling on the topological edge modes of a Su-Schrieffer-Heeger chain

Authors: C. E. Whittaker, E. Cancellieri, P. M. Walker, B. Royall, L. E. Tapia Rodriguez, E. Clarke, D. M. Whittaker, H. Schomerus, M. S. Skolnick, D. N. Krizhanovskii

Abstract: We study the effect of photonic spin-orbit coupling (SOC) in micropillar lattices on the topological edge states of a one-dimensional chain with a zigzag geometry, corresponding to the Su-Schrieffer-Heeger model equipped with an additional internal degree of freedom. The system combines the strong hop** anisotropy of the $p$-type pillar modes with the large TE-TM splitting in Bragg microcavities… ▽ More We study the effect of photonic spin-orbit coupling (SOC) in micropillar lattices on the topological edge states of a one-dimensional chain with a zigzag geometry, corresponding to the Su-Schrieffer-Heeger model equipped with an additional internal degree of freedom. The system combines the strong hop** anisotropy of the $p$-type pillar modes with the large TE-TM splitting in Bragg microcavities. By resolving the photoluminescence emission in energy and polarization we probe the effects of the resulting SOC on the spatial and spectral properties of the edge modes. We find that the edge modes feature a fine structure of states that penetrate by different amounts into the bulk of the chain, depending on the strength of the SOC terms present, thereby opening a route to manipulation of the topological states in the system. △ Less

Submitted 5 December, 2018; originally announced December 2018.

Comments: 5 pages, 3 figures (main text); 8 pages, 5 figures (supplementary material)

Journal ref: Phys. Rev. B 99, 081402 (2019)

A Facility for Production and Laser Cooling of Cesium Isotopes and Isomers

Authors: Alexandros Giatzoglou, Tanapoom Poomaradee, Ilkka Pohjalainen, Sami Rinta-Antila, Iain D. Moore, Philip M. Walker, Luca Marmugi, Ferruccio Renzoni

Abstract: We report on the design, installation, and test of an experimental facility for the production of ultra-cold atomic isotopes and isomers of cesium. The setup covers a broad span of mass numbers and nuclear isomers, allowing one to directly compare chains of isotopes and isotope/isomer pairs. Cesium nuclei are produced by fission or fusion-evaporation reactions using primary proton beams from a 130… ▽ More We report on the design, installation, and test of an experimental facility for the production of ultra-cold atomic isotopes and isomers of cesium. The setup covers a broad span of mass numbers and nuclear isomers, allowing one to directly compare chains of isotopes and isotope/isomer pairs. Cesium nuclei are produced by fission or fusion-evaporation reactions using primary proton beams from a 130 MeV cyclotron im**ing upon a suitable target. The species of interest is ejected from the target in ionic form, electrostatically accelerated, mass separated, and routed to a science chamber. Here, ions are neutralized by implantation in a thin foil, and extracted by thermal diffusion. A neutral vapor at room temperature is thus formed and trapped in a magneto-optical trap. Real-time fluorescence imaging and destructive absorption imaging provide information on the number of trapped atoms, their density, and their temperature. Tests with a dedicated beam of $^{133}$Cs$^{+}$ ions at 30 keV energy confirm neutralization, evaporation, and laser cooling to 150 $μ$K, with an average atomic density of 10$^{10}$ cm$^{-3}$. Availability of cold and dense atomic samples of Cs isotopes and isomers opens new avenues for high-precision measurements of isotopic and isomeric shifts thereby gaining deeper insight into the nuclear structure, as well as for sensitive measurements of isotopes' concentration ratios in trace quantities. The facility also constitutes the core for future experiments of many-body physics with nuclear isomers. △ Less

Submitted 28 August, 2018; originally announced August 2018.

Comments: 11 pages; 12 figures

Journal ref: Nucl. Instrum. Methods Phys. Res. A 908 (2018) 367-375

A Moving-Trap Zeeman Decelerator

Authors: Lewis A. McArd, Arin Mizouri, Paul A. Walker, Vijay Singh, Ulrich Krohn, Ed A. Hinds, David Carty

Abstract: We present a moving-trap Zeeman decelerator (MTZD) for use in molecular beam manipulation and magnetic-trap** experiments of paramagnetic atoms and molecules. The 0.49 m MTZD consists of a combination of a 2D magnetic quadrupole guide and deceleration coils, which together produce an array of 3D magnetic traps. The design is based on that of Trimeche et al. with significant modifications. The 2D… ▽ More We present a moving-trap Zeeman decelerator (MTZD) for use in molecular beam manipulation and magnetic-trap** experiments of paramagnetic atoms and molecules. The 0.49 m MTZD consists of a combination of a 2D magnetic quadrupole guide and deceleration coils, which together produce an array of 3D magnetic traps. The design is based on that of Trimeche et al. with significant modifications. The 2D quadrupole is driven by fast rising and falling square pulses of current (up to 700 A) of arbitrary lengths of time. The traps can be made to move at velocities from ca. 370 m/s down to zero, which is done by driving through the deceleration coils a sinusoidal current with frequencies ranging from zero to ca. 9 kHz and peak currents up to 1000 A. The trap velocity is proportional to the current frequency. The MTZD manipulates the velocities of molecular beams by traveling initially at the same velocity as the beam. 3D guiding is achieved with a constant current frequency and deceleration is achieved with a downward chirp of the current frequency at a rate corresponding to the desired deceleration. We explain the technical design and operation principles of the MTZD and we detail the custom power electronics that drive the 2D quadrupole guide and the decelerator coils. We present extensive Monte-Carlo trajectory simulations to demonstrate the properties of the MTZD and we conclude that decelerations should be kept below 30000 m/s/s to maintain a good 6D phase-space acceptance. In proof-of-principle experiments, with the deceleration coils operating with a reduced current in the range 100-200 A, we demonstrate the 3D guiding of a beam of metastable argon atoms at 373 m/s and deceleration at 25000 m/s/s from 342 m/s to 304 m/s. The deceleration corresponds to the removal of 21% of the kinetic energy of the beam. △ Less

Submitted 27 July, 2018; originally announced July 2018.

Comments: 33 pages, 12 figures

Optical Cages

Authors: V. Kumar, J. P. Walker, H. Grebel

Abstract: We examine array of metal-mesh frameworks for their wide-band absorption. These take the form of quasi-crystal optical cages. An array of cages tends to focus the incoming radiation within each framework. An array of cage-within-cage funnels the radiation from the outer cage to its inner core even further. We examine array of metal-mesh frameworks for their wide-band absorption. These take the form of quasi-crystal optical cages. An array of cages tends to focus the incoming radiation within each framework. An array of cage-within-cage funnels the radiation from the outer cage to its inner core even further. △ Less

Submitted 6 December, 2018; v1 submitted 16 July, 2018; originally announced July 2018.

Comments: 11 pages; 6 figures

Layout considerations for a future electron plasma research accelerator facility EuPRAXIA

Authors: Paul Andreas Walker, Ralph Wolfgang Assmann, Reinhard Brinkmann, Enrica Chiadroni, Ulrich Dorda, Massimo Ferrario, Dariusz Kocon, Barbara Marchetti, Lukas Pribyl, Arnd Specka, Roman Walczak

Abstract: The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is preparing a conceptual design for a highly compact and cost-effective European facility with multi-GeV electron beams using plasma as the acceleration medium. The design includes two user areas: one for FEL science and one for High Energy Physics (HEP) detector development and other pilot ap… ▽ More The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is preparing a conceptual design for a highly compact and cost-effective European facility with multi-GeV electron beams using plasma as the acceleration medium. The design includes two user areas: one for FEL science and one for High Energy Physics (HEP) detector development and other pilot applications. The accelerator facility will be based on a laser and/or a beam driven plasma acceleration approach. This contribution introduces layout considerations of the future plasma accelerator facilities in the context of EuPRAXIA. It compares conventional and novel plasma accelerator facility requirements and presents potential layouts for the future site. Together with performance analysis, cost effectiveness, and targeted user cases of the individual configurations, such layout studies will later enable a ranking of potential configurations. Based on this information the optimal combination of technologies will be defined for the 2019 conceptual design report of the EuPRAXIA facility. △ Less

Submitted 1 February, 2018; originally announced February 2018.

Comments: 5 pages, 2 figures, conference proceedings

LUX -- A Laser-Plasma Driven Undulator Beamline

Authors: N. Delbos, C. Werle, I. Dornmair, T. Eichner, L. Hübner, S. Jalas, S. W. Jolly, M. Kirchen, V. Leroux, P. Messner, M. Schnepp, M. Trunk, P. A. Walker, P. Winkler, A. R. Maier

Abstract: The LUX beamline is a novel type of laser-plasma accelerator. Building on the joint expertise of the University of Hamburg and DESY the beamline was carefully designed to combine state-of-the-art expertise in laser-plasma acceleration with the latest advances in accelerator technology and beam diagnostics. LUX introduces a paradigm change moving from single-shot demonstration experiments towards a… ▽ More The LUX beamline is a novel type of laser-plasma accelerator. Building on the joint expertise of the University of Hamburg and DESY the beamline was carefully designed to combine state-of-the-art expertise in laser-plasma acceleration with the latest advances in accelerator technology and beam diagnostics. LUX introduces a paradigm change moving from single-shot demonstration experiments towards available, stable and controllable accelerator operation. Here, we discuss the general design concepts of LUX and present first critical milestones that have recently been achieved, including the generation of electron beams at the repetition rate of up to 5 Hz with energies above 600 MeV and the generation of spontaneous undulator radiation at a wavelength well below 9 nm. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Comments: submitted

Status and Objectives of the Dedicated Accelerator R&D Facility "SINBAD" at DESY

Authors: U. Dorda, B. Marchetti, J. Zhu, F. Mayet, W. Kuropka, T. Vinatier, G. Vashchenko, K. Galaydych, P. A. Walker, D. Marx, R. Brinkmann, R. Assmann, N. H. Matlis, A. Fallahi, F. X. Kaertner

Abstract: We present a status update on the dedicated R\&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100\,MeV S-band linac at its core. We present the objectives of… ▽ More We present a status update on the dedicated R\&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100\,MeV S-band linac at its core. We present the objectives of this experiment ranging from the study of compression techniques to sub-fs level to its application as injector for various advanced acceleration schemes e.g. the plans to use ARES as a test-site for DLA experiments in the context of the ACHIP collaboration. The time-line including the planned extension with laser driven plasma-wakefield acceleration is presented. The second initial experiment is AXSIS which aims to accelerate fs-electron bunches to 15\,MeV in a THz driven dielectric structure and subsequently create X-rays by inverse Compton scattering. △ Less

Submitted 9 January, 2018; originally announced January 2018.

Comments: EAAC'17 conference proceedings

Novel Double Triple Bend Achromat (DTBA) lattice design for a next generation 3 GeV Synchrotron Light Source

Authors: A. Alekou, R. Bartolini, N. Carmignani, S. M. Liuzzo, P. Raimondi, T. Pulampong, R. P. Walker

Abstract: The Double Triple Bend Achromat (DTBA) lattice~\cite{DTBAipac16} is a novel lattice design for a next generation 3 GeV Synchrotron Light Source. Starting from a modification of the Hybrid Multi Bend Achromat (HMBA) lattice~\cite{ESRF} developed at ESRF and inspired by the Double-Double Bend Achromat (DDBA) lattice~\cite{Diamond1, Diamond2} developed at Diamond, DTBA combines the advantages of both… ▽ More The Double Triple Bend Achromat (DTBA) lattice~\cite{DTBAipac16} is a novel lattice design for a next generation 3 GeV Synchrotron Light Source. Starting from a modification of the Hybrid Multi Bend Achromat (HMBA) lattice~\cite{ESRF} developed at ESRF and inspired by the Double-Double Bend Achromat (DDBA) lattice~\cite{Diamond1, Diamond2} developed at Diamond, DTBA combines the advantages of both cells. The typical MBA lattice cells have one straight section dedicated to an insertion device, whereas this new cell layout has two such drifts, thus increasing the fraction of available space for the installation of insertion devices. The DTBA lattice achieves an emittance of $\sim\mathrm{132~pm}$, a dynamic aperture of $\mathrm{\sim\pm10\pm1~mm}$ (calculated at the injection point), an injection efficiency of $\mathrm{\sim\mathrm88\pm5\%}$ and a lifetime of $\mathrm{1.4\pm0.2~h}$ with errors. The characteristics of DTBA, the methodology and results of the linear and non-linear optics optimisations, with and without the presence of errors, are presented in detail. △ Less

Submitted 18 July, 2018; v1 submitted 8 January, 2018; originally announced January 2018.

Semi-automated labelling of medical images: benefits of a collaborative work in the evaluation of prostate cancer in MRI

Authors: Christian Mata, Alain Lalande, Paul Walker, Arnau Oliver, Joan Martí

Abstract: Purpose: The goal of this study is to show the advantage of a collaborative work in the annotation and evaluation of prostate cancer tissues from T2-weighted MRI compared to the commonly used double blind evaluation. Methods: The variability of medical findings focused on the prostate gland (central gland, peripheral and tumoural zones) by two independent experts was firstly evaluated, and secon… ▽ More Purpose: The goal of this study is to show the advantage of a collaborative work in the annotation and evaluation of prostate cancer tissues from T2-weighted MRI compared to the commonly used double blind evaluation. Methods: The variability of medical findings focused on the prostate gland (central gland, peripheral and tumoural zones) by two independent experts was firstly evaluated, and secondly compared with a consensus of these two experts. Using a prostate MRI database, experts drew regions of interest (ROIs) corresponding to healthy prostate (peripheral and central zones) and cancer using a semi-automated tool. One of the experts then drew the ROI with knowledge of the other expert's ROI. Results: The surface area of each ROI as the Hausdorff distance and the Dice coefficient for each contour were evaluated between the different experiments, taking the drawing of the second expert as the reference. The results showed that the significant differences between the two experts became non-significant with a collaborative work. Conclusions: This study shows that collaborative work with a dedicated tool allows a better consensus between expertise than using a double blind evaluation. Although we show this for prostate cancer evaluation in T2-weighted MRI, the results of this research can be extrapolated to other diseases and kind of medical images. △ Less

Submitted 29 August, 2017; originally announced August 2017.

Dark Solitons in Waveguide Polariton Fluids Shed Light on Interaction Constants

Authors: P. M. Walker, L. Tinkler, B. Royall, D. V. Skryabin, I. Farrer, D. A. Ritchie, M. S. Skolnick, D. N. Krizhanovskii

Abstract: We study exciton-polariton nonlinear optical fluids in a high momentum regime for the first time. Defects in the fluid develop into dark solitons whose healing length decreases with increasing density. We deduce interaction constants for continuous wave polaritons an order of magnitude larger than with picosecond pulses. Time dependent measurements show a 100ps time for the buildup of the interact… ▽ More We study exciton-polariton nonlinear optical fluids in a high momentum regime for the first time. Defects in the fluid develop into dark solitons whose healing length decreases with increasing density. We deduce interaction constants for continuous wave polaritons an order of magnitude larger than with picosecond pulses. Time dependent measurements show a 100ps time for the buildup of the interaction strength suggesting a self-generated excitonic reservoir as the source of the extra nonlinearity. The experimental results agree well with a model of coupled photons, excitons and the reservoir. △ Less

Submitted 24 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. Lett. 119, 097403 (2017)

Coherent gamma photon generation in a Bose-Einstein condensate of $^{135m}$Cs

Authors: Luca Marmugi, P. M. Walker, F. Renzoni

Abstract: We have identified a mechanism of collective nuclear de-excitation in a Bose-Einstein condensate of $^{135}$Cs atoms in their isomeric states, $^{135m}$Cs, suitable for the generation of coherent gamma photons. The process described here does not correspond to single-pass amplification, which cannot occur in atomic systems due to the large shift between absorption and emission lines, nor does it r… ▽ More We have identified a mechanism of collective nuclear de-excitation in a Bose-Einstein condensate of $^{135}$Cs atoms in their isomeric states, $^{135m}$Cs, suitable for the generation of coherent gamma photons. The process described here does not correspond to single-pass amplification, which cannot occur in atomic systems due to the large shift between absorption and emission lines, nor does it require the large densities associated to standard Dicke super-radiance. It thus overcome the limitations that have been hindering the generation of coherent gamma rays in many systems. Therefore, we propose an approach for generation of coherent gamma rays, which relies on a combination of well established techniques of nuclear and atomic physics, and can be realized with currently available technology. △ Less

Submitted 20 December, 2017; v1 submitted 11 August, 2016; originally announced August 2016.

Comments: published in Physics Letters B

Performance of a Full-Size Small-Strip Thin Gap Chamber Prototype for the ATLAS New Small Wheel Muon Upgrade

Authors: Angel Abusleme, Camille Bélanger-Champagne, Alain Bellerive, Yan Benhammou, James Botte, Hadar Cohen, Merlin Davies, Yanyan Du, Lea Gauthier, Thomas Koffas, Serguei Kuleshov, Benoit Lefebvre, Changyu Li, Nachman Lupu, Giora Mikenberg, Daniel Mori, Jean-Pierre Ochoa-Ricoux, Estel Perez Codina, Sebastien Rettie, Andree Robichaud-Véronneau, Rimsky Rojas, Meir Shoa, Vladimir Smakhtin, Bernd Stelzer, Oliver Stelzer-Chilton , et al. (10 additional authors not shown)

Abstract: The instantaneous luminosity of the Large Hadron Collider at CERN will be increased up to a factor of five with respect to the present design value by undergoing an extensive upgrade program over the coming decade. The most important upgrade project for the ATLAS Muon System is the replacement of the present first station in the forward regions with the so-called New Small Wheels (NSWs). The NSWs… ▽ More The instantaneous luminosity of the Large Hadron Collider at CERN will be increased up to a factor of five with respect to the present design value by undergoing an extensive upgrade program over the coming decade. The most important upgrade project for the ATLAS Muon System is the replacement of the present first station in the forward regions with the so-called New Small Wheels (NSWs). The NSWs will be installed during the LHC long shutdown in 2018/19. Small-Strip Thin Gap Chamber (sTGC) detectors are designed to provide fast trigger and high precision muon tracking under the high luminosity LHC conditions. To validate the design, a full-size prototype sTGC detector of approximately 1.2 $\times$ $1.0\, \mathrm{m}^2$ consisting of four gaps has been constructed. Each gap provides pad, strip and wire readouts. The sTGC intrinsic spatial resolution has been measured in a $32\, \mathrm{GeV}$ pion beam test at Fermilab. At perpendicular incidence angle, single gap position resolutions of about $50\,\mathrm{μm}$ have been obtained, uniform along the sTGC strip and perpendicular wire directions, well within design requirements. Pad readout measurements have been performed in a $130\, \mathrm{GeV}$ muon beam test at CERN. The transition region between readout pads has been found to be $4\,\mathrm{mm}$, and the pads have been found to be fully efficient. △ Less

Submitted 21 September, 2015; originally announced September 2015.

Comments: 10 pages, 16 figures

Ultra-Low-Power Hybrid Light-Matter Solitons

Authors: L. Tinkler, P. M. Walker, D. V. Skryabin, A. Yulin, B. Royall, I. Farrer, D. A. Ritchie, D. N. Krizhanovskii, M. S. Skolnick

Abstract: New functionalities in nonlinear optics will require systems with giant optical nonlinearity as well as compatibility with photonic circuit fabrication techniques. Here we introduce a new platform based on strong light-matter coupling between waveguide photons and quantum-well excitons. On a sub-millimeter length scale we generate sub-picosecond bright temporal solitons at a pulse energy of only 0… ▽ More New functionalities in nonlinear optics will require systems with giant optical nonlinearity as well as compatibility with photonic circuit fabrication techniques. Here we introduce a new platform based on strong light-matter coupling between waveguide photons and quantum-well excitons. On a sub-millimeter length scale we generate sub-picosecond bright temporal solitons at a pulse energy of only 0.5 pico-Joules. From this we deduce an unprecedented nonlinear refractive index 3 orders of magnitude larger than in any other ultrafast system. We study both temporal and spatio-temporal nonlinear effects and for the first time observe dark-bright spatio-temporal solitons. Theoretical modelling of soliton formation in the strongly coupled system confirms the experimental observations. These results show the promise of our system as a high speed, low power, integrated platform for physics and devices based on strong interactions between photons. △ Less

Submitted 2 September, 2014; originally announced September 2014.

Two-dimensional metal-chalcogenide films in tunable optical microcavities

Authors: S. Schwarz, S. Dufferwiel, P. M. Walker, F. Withers, A. A. P. Trichet, M. Sich, F. Li, E. A. Chekhovich, D. N. Borisenko, N. N. Kolesnikov, K. S. Novoselov, M. S. Skolnick, J. M Smith, D. N. Krizhanovskii, A. I. Tartakovskii

Abstract: Quasi-two-dimensional (2D) films of layered metal-chalcogenides have attractive optoelectronic properties. However, photonic applications of thin films may be limited owing to weak light absorption and surface effects leading to reduced quantum yield. Integration of 2D films in optical microcavities will permit these limitations to be overcome owing to modified light coupling with the films. Here… ▽ More Quasi-two-dimensional (2D) films of layered metal-chalcogenides have attractive optoelectronic properties. However, photonic applications of thin films may be limited owing to weak light absorption and surface effects leading to reduced quantum yield. Integration of 2D films in optical microcavities will permit these limitations to be overcome owing to modified light coupling with the films. Here we present tunable microcavities with embedded monolayer MoS2 or few monolayer GaSe films. We observe significant modification of spectral and temporal properties of photoluminescence (PL): PL is emitted in spectrally narrow and wavelength-tunable cavity modes with quality factors up to 7400; PL life-time shortening by a factor of 10 is achieved, a consequence of Purcell enhancement of the spontaneous emission rate. This work has potential to pave the way to microcavity-enhanced light-emitting devices based on layered 2D materials and their heterostructures, and also opens possibilities for cavity QED in a new material system of van der Waals crystals. △ Less

Submitted 15 August, 2014; originally announced August 2014.

Journal ref: Nano Lett., 14, 7003, 2014

Strong exciton-photon coupling in open semiconductor microcavities

Authors: S. Dufferwiel, F. Fras, A. Trichet, P. M. Walker, F. Li, L. Giriunas, M. N. Makhonin, L. R. Wilson, J. M. Smith, E. Clarke, M. S. Skolnick, D. N. Krizhanovskii

Abstract: We present a method to implement 3-dimensional polariton confinement with in-situ spectral tuning of the cavity mode. Our tunable microcavity is a hybrid system consisting of a bottom semiconductor distributed Bragg reflector (DBR) with a cavity containing quantum wells (QWs) grown on top and a dielectric concave DBR separated by a micrometer sized gap. Nanopositioners allow independent positionin… ▽ More We present a method to implement 3-dimensional polariton confinement with in-situ spectral tuning of the cavity mode. Our tunable microcavity is a hybrid system consisting of a bottom semiconductor distributed Bragg reflector (DBR) with a cavity containing quantum wells (QWs) grown on top and a dielectric concave DBR separated by a micrometer sized gap. Nanopositioners allow independent positioning of the two mirrors and the cavity mode energy can be tuned by controlling the distance between them. When close to resonance we observe a characteristic anticrossing between the cavity modes and the QW exciton demonstrating strong coupling. For the smallest radii of curvature concave mirrors of 5.6 $μ$m and 7.5 $μ$m real-space polariton imaging reveals submicron polariton confinement due to the hemispherical cavity geometry. △ Less

Submitted 19 March, 2014; originally announced March 2014.

AGATA - Advanced Gamma Tracking Array

Authors: S. Akkoyun, A. Algora, B. Alikhani, F. Ameil, G. de Angelis, L. Arnold, A. Astier, A. Ataç, Y. Aubert, C. Aufranc, A. Austin, S. Aydin, F. Azaiez, S. Badoer, D. L. Balabanski, D. Barrientos, G. Baulieu, R. Baumann, D. Bazzacco, F. A. Beck, T. Beck, P. Bednarczyk, M. Bellato, M. A. Bentley, G. Benzoni , et al. (329 additional authors not shown)

Abstract: The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the… ▽ More The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realization of gamma-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly-segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterization of the crystals was measured and compared with detector-response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximize its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer. △ Less

Submitted 17 September, 2012; v1 submitted 24 November, 2011; originally announced November 2011.

Comments: This version contains a correction of a ty** error in the caption of Fig. 2. The DOI to the article published in Nucl. Instr. Meth A was also added

Nuclear structure of 178Hf related to the spin-16, 31-year isomer

Authors: Yang Sun, Xian-Rong Zhou, Gui-Lu Long, En-Guang Zhao, Philip M. Walker

Abstract: The projected shell model is used to study the multi-quasiparticle and collective excitations of 178Hf. With an axially symmetric basis, the spin-16 isomer at 2.4 MeV appears to be well separated in energy/spin space from other configurations. However, projected energy surface calculations suggest that 178Hf has significant softness to axially asymmetric shapes, which can strongly modify the lev… ▽ More The projected shell model is used to study the multi-quasiparticle and collective excitations of 178Hf. With an axially symmetric basis, the spin-16 isomer at 2.4 MeV appears to be well separated in energy/spin space from other configurations. However, projected energy surface calculations suggest that 178Hf has significant softness to axially asymmetric shapes, which can strongly modify the level distribution. The implications for photodeexitation of the isomer are discussed. △ Less

Submitted 19 May, 2004; originally announced May 2004.

Comments: 8 pages, 4 figures

Journal ref: Phys.Lett.B589:83-88,2004