-
Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: influence of post-processing, printing direction, temperature and pre-straining
Authors:
G. Álvarez,
Z. Harris,
K. Wada,
C. Rodríguez,
E. Martínez-Pañeda
Abstract:
The influence of post-build processing on the hydrogen embrittlement behavior of additively manufactured (AM) 316L stainless steel fabricated using laser powder bed fusion was assessed at both room temperature and -50$^\circ$ C via uniaxial tensile experiments. In the absence of hydrogen at ambient temperature, all four evaluated AM conditions (as-built (AB), annealed (ANN), hot isostatic pressed…
▽ More
The influence of post-build processing on the hydrogen embrittlement behavior of additively manufactured (AM) 316L stainless steel fabricated using laser powder bed fusion was assessed at both room temperature and -50$^\circ$ C via uniaxial tensile experiments. In the absence of hydrogen at ambient temperature, all four evaluated AM conditions (as-built (AB), annealed (ANN), hot isostatic pressed (HIP), and HIP plus cold worked (CW) to 30\%) exhibit notably reduced ductility relative to conventionally manufactured (CM) 316L stainless steel. The AM material exhibits sensitivity to the build direction, both in the presence and absence of hydrogen, with a notable increase in yield strength in the X direction and enhanced ductility in the Z direction. Conversely, testing of non-charged specimens at -50$^\circ$ C revealed similar ductility between the CM, AB, ANN, and HIP conditions. Upon hydrogen charging, the ductility of all four AM conditions was found to be similar to that of CM 316L at ambient temperature, with the HIP condition actually exceeding the CM material. Critically, testing of hydrogen-charged samples at -50$^\circ$ C revealed that the ductility of the HIP AM 316L condition was nearly double that observed in the CM 316L. This improved performance persisted even after cold working, as the CW AM 316L exhibited comparable ductility to CM 316L at -50 C after hydrogen charging, despite having a 2-fold higher yield strength. Feritscope measurements suggest this increased performance is related to the reduced propensity for AM 316L to form strain-induced martensite during deformation, even after significant post-processing treatments. These results demonstrate that AM 316L can be post-processed using typical procedures to exhibit similar to or even improved resistance to hydrogen embrittlement relative to CM 316L.
△ Less
Submitted 14 November, 2023;
originally announced April 2024.
-
Laser cooling of positronium
Authors:
K. Shu,
Y. Tajima,
R. Uozumi,
N. Miyamoto,
S. Shiraishi,
T. Kobayashi,
A. Ishida,
K. Yamada,
R. W. Gladen,
T. Namba,
S. Asai,
K. Wada,
I. Mochizuki,
T. Hyodo,
K. Ito,
K. Michishio,
B. E. O'Rourke,
N. Oshima,
K. Yoshioka
Abstract:
When laser radiation is skilfully applied, atoms and molecules can be cooled allowing precise measurements and control of quantum systems. This is essential in fundamental studies of physics as well as practical applications such as precision spectroscopy, quantum-statistical-property manifesting ultracold gases, and quantum computing. In laser cooling, repeated cycles of laser photon absorption a…
▽ More
When laser radiation is skilfully applied, atoms and molecules can be cooled allowing precise measurements and control of quantum systems. This is essential in fundamental studies of physics as well as practical applications such as precision spectroscopy, quantum-statistical-property manifesting ultracold gases, and quantum computing. In laser cooling, repeated cycles of laser photon absorption and direction-independent spontaneous emission can slow atoms and molecules to otherwise unattainable velocities. Simple systems can provide a rigorous testing ground for fundamental theories of physics; one such system is the purely leptonic positronium, an exotic atom of an electron and its antiparticle, the positron. However, the cooling of positronium has hitherto remained unrealised. Here, we demonstrate laser cooling of positronium. A novel laser system of a train of broadband pulses with successively increasing central frequencies was used to overcome major challenges presented by the short lifetime of positronium and the significant Doppler broadening and recoil as a consequence of its very light mass. One-dimensional chirp cooling of the dilute positronium gas in a counter-propagating configuration gave a final velocity distribution corresponding to approximately 1 K in a short time of 100 ns. This study on a pure leptonic system is a major step in the field of low-temperature fundamental physics of antimatter, and is complementary to the laser cooling of antihydrogen, a hadron-containing exotic atom. Progress in this field is vital in elucidating the origin of the matter-antimatter asymmetry in the universe. The application of laser cooling to positronium may afford a unique opportunity to rigorously test bound-state quantum electrodynamics. Moreover, laser cooling of positronium is key to the realisation of Bose-Einstein condensation in this matter-antimatter system.
△ Less
Submitted 15 October, 2023; v1 submitted 12 October, 2023;
originally announced October 2023.
-
Mechanically actuated Kerr soliton microcombs
Authors:
Shun Fujii,
Koshiro Wada,
Soma Kogure,
Takasumi Tanabe
Abstract:
Mode-locked ultrashort pulse sources with a repetition rate of up to several tens of gigahertz greatly facilitate versatile photonic applications such as frequency synthesis, metrology, radar, and optical communications. Dissipative Kerr soliton microcombs provide an attractive solution as a broadband, high-repetition-rate compact laser system in this context. However, its operation usually requir…
▽ More
Mode-locked ultrashort pulse sources with a repetition rate of up to several tens of gigahertz greatly facilitate versatile photonic applications such as frequency synthesis, metrology, radar, and optical communications. Dissipative Kerr soliton microcombs provide an attractive solution as a broadband, high-repetition-rate compact laser system in this context. However, its operation usually requires sophisticated pump laser control to initiate and stabilize the soliton microcombs, particularly in millimeter-sized ultrahigh-Q whispering-gallery resonators. Here, we realize a mechanically actuated soliton microcomb oscillator with a microwave repetition rate of 15 GHz. This enables direct soliton initiation, long-term stabilization, and fine tuning, where the operation now lifts the prerequisite pump laser tunability that must be relaxed if the technology is to be widely used outside the laboratory environment. We reveal the prospects for using this method with a wide range of applications that would benefit from mechanical soliton actuation such as optical clocks, spectral extension, and dual-comb spectroscopy.
△ Less
Submitted 3 June, 2023;
originally announced June 2023.
-
Search for astrophysical electron antineutrinos in Super-Kamiokande with 0.01wt% gadolinium-loaded water
Authors:
M. Harada,
K. Abe,
C. Bronner,
Y. Hayato,
K. Hiraide,
K. Hosokawa,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
R. Kaneshima,
Y. Kashiwagi,
Y. Kataoka,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nakano,
M. Nakahata,
S. Nakayama,
Y. Noguchi,
K. Okamoto,
K. Sato,
H. Sekiya,
H. Shiba
, et al. (216 additional authors not shown)
Abstract:
We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay w…
▽ More
We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay with efficient background rejection and higher signal efficiency thanks to the high efficiency of the neutron tagging technique. In this paper, we report the result for the initial stage of SK-Gd with a $22.5\times552$ $\rm kton\cdot day$ exposure at 0.01% Gd mass concentration. No significant excess over the expected background in the observed events is found for the neutrino energies below 31.3 MeV. Thus, the flux upper limits are placed at the 90% confidence level. The limits and sensitivities are already comparable with the previous SK result with pure-water ($22.5 \times 2970 \rm kton\cdot day$) owing to the enhanced neutron tagging.
△ Less
Submitted 30 May, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Analyzing the neutron and $γ$-ray emission properties of an americium-beryllium tagged neutron source
Authors:
Hiroshi Ito,
Kohei Wada,
Takatomi Yano,
Yota Hino,
Yuga Ommura,
Masayuki Harada,
Akihiro Minamino,
Masaki Ishitsuka
Abstract:
Americium-beryllium (AmBe), a well-known tagged neutron source, is commonly used for evaluating the neutron detection efficiency of detectors used in ultralow background particle physics experiments, such as reactor neutrino and diffuse supernova neutrino background experiments. In particular, AmBe sources are used to calibrate neutron tagging by selecting the 4438-keV $γ$-ray signal, which is sim…
▽ More
Americium-beryllium (AmBe), a well-known tagged neutron source, is commonly used for evaluating the neutron detection efficiency of detectors used in ultralow background particle physics experiments, such as reactor neutrino and diffuse supernova neutrino background experiments. In particular, AmBe sources are used to calibrate neutron tagging by selecting the 4438-keV $γ$-ray signal, which is simultaneously emitted with a neutron signal. Therefore, analyzing the neutron and $γ$-ray emission properties of AmBe sources is crucial. In this study, we used the theoretical shape of a neutron energy spectrum, which was divided into three parts, to develop models of the energy spectrum and verify the results using experimental data. We used an AmBe source to measure the energy spectra of simultaneously emitted neutrons and $γ$-rays and determine the emission ratio of the neutrons with and without $γ$-ray emission. The measured spectrum was consistent with that obtained from the simulated result, whereas the measured emission ratio was significantly different from the corresponding simulated result. Here, we also discuss the feasibility of determining the neutron emission rates from the spectra divided into three parts.
△ Less
Submitted 16 September, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Formula of Laminar Flame Speed Coupled with Differential Equation for Temperature in Low-Mach-Number Model
Authors:
Keigo Wada
Abstract:
The non-monotonic profile of temperature is to be considered in the context of combustion inside tubes or thermonuclear flames, which may accelerates to become detonation waves. This transition is known as deflagration-to-detonation transition. Focusing on this point, we extend the study of adiabatic flames, which assumes zero temperature gradient at the burned-side edge of a flame front, to the c…
▽ More
The non-monotonic profile of temperature is to be considered in the context of combustion inside tubes or thermonuclear flames, which may accelerates to become detonation waves. This transition is known as deflagration-to-detonation transition. Focusing on this point, we extend the study of adiabatic flames, which assumes zero temperature gradient at the burned-side edge of a flame front, to the case of non-zero temperature gradient by introducing compression zone behind the front. Such a treatment has been performed in the previous work based on the ignition temperature approximation. In that case, the effect of gas compression on flames was described by asymptotic solutions with respect to small squared Mach numbers: for example, in the compression zone, inner solutions are expressed by use of Lambert $W$ function. However, due to the aim of obtaining analytical solutions inside a flame front, the temperature dependence of reaction term was ignored and, as a result, the cold boundary difficulty was not treated seriously. This issue is resolved in this study by use of large activation energy asymptotics with the reaction term expressed by the Arrhenius type. The temperature distribution is computed numerically in the reaction zone and calculated analytically in the compression zone. The burning-rate eigenvalue problem is also considered to derive a formula of laminar flame speed, which is coupled with differential equation for temperature in the reaction zone. Then, the dependence of laminar flame speed on thermal-diffusive parameters, accompanied with hydrodynamic properties brought by the compression effect, becomes clear. The non-zero gradient condition of temperature on the burned side of a flame front is obtained for non-zero values of Mach number.
△ Less
Submitted 10 February, 2023;
originally announced February 2023.
-
Searching for neutrinos from solar flares across solar cycles 23 and 24 with the Super-Kamiokande detector
Authors:
K. Okamoto,
K. Abe,
Y. Hayato,
K. Hiraide,
K. Hosokawa,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
Y. Kaneshima,
Y. Kataoka,
Y. Kashiwagi,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nagao,
M. Nakahata,
Y. Nakano,
S. Nakayama,
Y. Noguchi,
K. Sato,
H. Sekiya,
K. Shimizu,
M. Shiozawa
, et al. (220 additional authors not shown)
Abstract:
Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we…
▽ More
Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we searched for neutrino interactions within narrow time windows coincident with $γ$-rays and soft X-rays recorded by satellites. In addition, we performed the first attempt to search for solar-flare neutrinos from solar flares on the invisible side of the Sun by using the emission time of coronal mass ejections (CMEs). By selecting twenty powerful solar flares above X5.0 on the visible side and eight CMEs whose emission speed exceeds $2000$ $\mathrm{km \, s^{-1}}$ on the invisible side from 1996 to 2018, we found two (six) neutrino events coincident with solar flares occurring on the visible (invisible) side of the Sun, with a typical background rate of $0.10$ ($0.62$) events per flare in the MeV-GeV energy range. No significant solar-flare neutrino signal above the estimated background rate was observed. As a result we set the following upper limit on neutrino fluence at the Earth $\mathitΦ<1.1\times10^{6}$ $\mathrm{cm^{-2}}$ at the $90\%$ confidence level for the largest solar flare. The resulting fluence limits allow us to constrain some of the theoretical models for solar-flare neutrino emission.
△ Less
Submitted 26 October, 2022; v1 submitted 24 October, 2022;
originally announced October 2022.
-
Effect of projectile shape and interior structure on crater size in strength regime
Authors:
T. Kadono,
M. Arakawa,
S. Tsujido,
M. Yasui,
S. Hasegawa,
K. Kurosawa,
K. Shirai,
C. Okamoto,
K. Ogawa,
Y. Iijima,
Y. Shimaki,
K. Wada
Abstract:
Experiments on crater formation in the strength regime were conducted using projectiles of various shapes with an aspect ratio of ~1, including both solid and hollow interiors. The surface diameter, inner (pit) diameter, and depth of the craters on basalt and porous gypsum targets were measured. Using the bulk density of the projectile, the surface diameter and depth for basalt and the pit diamete…
▽ More
Experiments on crater formation in the strength regime were conducted using projectiles of various shapes with an aspect ratio of ~1, including both solid and hollow interiors. The surface diameter, inner (pit) diameter, and depth of the craters on basalt and porous gypsum targets were measured. Using the bulk density of the projectile, the surface diameter and depth for basalt and the pit diameter and depth for porous gypsum were scaled using the pi-scaling law for crater formation in the strength regime. The numerical code iSALE was used to simulate the impact of projectiles of various shapes and interior structure with similar bulk densities. Results show that the distributions of the maximum (peak) pressure experienced and particle velocity in the targets were similar regardless of projectile shape and interior structure, implying that the dimensions of the final craters were almost identical. This is consistent with the experimental results. Thus, we conclude that the size of the craters formed by the impact of projectiles with different shape and interior structure can be scaled using a conventional scaling law in the strength regime, using bulk density as projectile density.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Versatile tuning of Kerr soliton microcombs in crystalline microresonators
Authors:
Shun Fujii,
Koshiro Wada,
Ryo Sugano,
Hajime Kumazaki,
Soma Kogure,
Yuichiro K. Kato,
Takasumi Tanabe
Abstract:
Microresonator-based optical frequency combs emitted from high-quality-factor microresonators, also known as microcombs, have opened up new horizons to areas of optical frequency comb technology including frequency metrology, precision sensing, and optical communication. To extend the capability of microcombs for such applications, large and reliable tunability is of critical importance. Here, we…
▽ More
Microresonator-based optical frequency combs emitted from high-quality-factor microresonators, also known as microcombs, have opened up new horizons to areas of optical frequency comb technology including frequency metrology, precision sensing, and optical communication. To extend the capability of microcombs for such applications, large and reliable tunability is of critical importance. Here, we show broad spectral tuning of Kerr soliton microcombs in a thermally controlled crystalline microresonator with pump-detuning stabilization. The fundamental elements composing frequency combs, namely the center frequency, repetition frequency, and carrier-envelope offset frequency, are spectrally tuned by up to -48.8 GHz, -5.85 MHz, and -386 MHz, respectively, leveraging thermal effects in ultrahigh-Q crystalline magnesium fluoride resonators. We further demonstrate a 3.4-fold enhancement of soliton comb power resulting from thermal expansion with a temperature change of only 28 K by employing quantitative analyses of the fiber-to-resonator coupling efficiency.
△ Less
Submitted 2 March, 2023; v1 submitted 28 June, 2022;
originally announced June 2022.
-
Pre-Supernova Alert System for Super-Kamiokande
Authors:
Super-Kamiokande Collaboration,
:,
L. N. Machado,
K. Abe,
Y. Hayato,
K. Hiraide,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
R. Kaneshima,
Y. Kashiwagi,
Y. Kataoka,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nakano,
M. Nakahata,
S. Nakayama,
Y. Noguchi,
K. Okamoto,
K. Sato,
H. Sekiya,
H. Shiba
, et al. (202 additional authors not shown)
Abstract:
In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient co…
▽ More
In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient core-collapse supernovae through detection of electron anti-neutrinos from thermal and nuclear processes responsible for the cooling of massive stars before the gravitational collapse of their cores. These pre-supernova neutrinos emitted during the silicon burning phase can exceed the energy threshold for IBD reactions. We present the sensitivity of SK-Gd to pre-supernova stars and the techniques used for the development of a pre-supernova alarm based on the detection of these neutrinos in SK, as well as prospects for future SK-Gd phases with higher concentrations of Gd. For the current SK-Gd phase, high-confidence alerts for Betelgeuse could be issued up to nine hours in advance of the core-collapse itself.
△ Less
Submitted 17 August, 2022; v1 submitted 19 May, 2022;
originally announced May 2022.
-
Dissipative Kerr soliton microcombs for FEC-free optical communications over 100 channels
Authors:
Shun Fujii,
Shuya Tanaka,
Tamiki Ohtsuka,
Soma Kogure,
Koshiro Wada,
Hajime Kumazaki,
Shun Tasaka,
Yosuke Hashimoto,
Yuta Kobayashi,
Tomohiro Araki,
Kentaro Furusawa,
Norihiko Sekine,
Satoki Kawanishi,
Takasumi Tanabe
Abstract:
The demand for high-speed and highly efficient optical communication techniques has been rapidly growing due to the ever-increasing volume of data traffic. As well as the digital coherent communication used for core and metro networks, intensity modulation and direct detection (IM-DD) are still promising schemes in intra/inter data centers thanks to their low latency, high reliability, and good co…
▽ More
The demand for high-speed and highly efficient optical communication techniques has been rapidly growing due to the ever-increasing volume of data traffic. As well as the digital coherent communication used for core and metro networks, intensity modulation and direct detection (IM-DD) are still promising schemes in intra/inter data centers thanks to their low latency, high reliability, and good cost performance. In this work, we study a microresonator-based frequency comb as a potential light source for future IM-DD optical systems where applications may include replacing individual stabilized lasers with a continuous laser driven microresonator. Regarding comb line powers and spectral intervals, we compare a modulation instability comb and a soliton microcomb and provide a quantitative analysis with regard to telecom applications. Our experimental demonstration achieved a forward error correction (FEC) free operation of bit-error rate (BER) <10^(-9) with a 1.45 Tbps capacity using a total of 145 lines over the entire C-band and revealed the possibility of soliton microcomb-based ultra-dense wavelength division multiplexing (WDM) with a simple, cost-effective IM-DD scheme, with a view to future practical use in data centers.
△ Less
Submitted 20 December, 2021; v1 submitted 29 October, 2021;
originally announced November 2021.
-
Morning commute in congested urban rail transit system: A macroscopic model for equilibrium distribution of passenger arrivals
Authors:
Jiahua Zhang,
Kentaro Wada,
Takashi Oguchi
Abstract:
This paper proposes a macroscopic model to describe the equilibrium distribution of passenger arrivals for the morning commute problem in a congested urban rail transit system. We use a macroscopic train operation sub-model developed by Seo et al (2017a,b) to express the interaction between the dynamics of passengers and trains in a simplified manner while maintaining their essential physical rela…
▽ More
This paper proposes a macroscopic model to describe the equilibrium distribution of passenger arrivals for the morning commute problem in a congested urban rail transit system. We use a macroscopic train operation sub-model developed by Seo et al (2017a,b) to express the interaction between the dynamics of passengers and trains in a simplified manner while maintaining their essential physical relations. The equilibrium conditions of the proposed model are derived and a solution method is provided. The characteristics of the equilibrium are then examined through analytical discussion and numerical examples. As an application of the proposed model, we analyze a simple time-dependent timetable optimization problem with equilibrium constraints and reveal that a "capacity increasing paradox" exists such that a higher dispatch frequency can increase the equilibrium cost. Furthermore, insights into the design of the timetable are obtained and the timetable influence on passengers' equilibrium travel costs are evaluated.
△ Less
Submitted 2 December, 2021; v1 submitted 26 February, 2021;
originally announced February 2021.
-
Lightweight Interactions for Reciprocal Cooperation in a Social Network Game
Authors:
Masanori Takano,
Kazuya Wada,
Ichiro Fukuda
Abstract:
The construction of reciprocal relationships requires cooperative interactions during the initial meetings. However, cooperative behavior with strangers is risky because the strangers may be exploiters. In this study, we show that people increase the likelihood of cooperativeness of strangers by using lightweight non-risky interactions in risky situations based on the analysis of a social network…
▽ More
The construction of reciprocal relationships requires cooperative interactions during the initial meetings. However, cooperative behavior with strangers is risky because the strangers may be exploiters. In this study, we show that people increase the likelihood of cooperativeness of strangers by using lightweight non-risky interactions in risky situations based on the analysis of a social network game (SNG). They can construct reciprocal relationships in this manner. The interactions involve low-cost signaling because they are not generated at any cost to the senders and recipients. Theoretical studies show that low-cost signals are not guaranteed to be reliable because the low-cost signals from senders can lie at any time. However, people used low-cost signals to construct reciprocal relationships in an SNG, which suggests the existence of mechanisms for generating reliable, low-cost signals in human evolution.
△ Less
Submitted 8 November, 2016;
originally announced November 2016.
-
Reciprocal Altruism-based Cooperation in a Social Network Game
Authors:
Masanori Takano,
Kazuya Wada,
Ichiro Fukuda
Abstract:
Cooperative behaviors are common in humans and are fundamental to our society. Theoretical and experimental studies have modeled environments in which the behaviors of humans, or agents, have been restricted to analyze their social behavior. However, it is important that such studies are generalized to less restrictive environments to understand human society. Social network games (SNGs) provide a…
▽ More
Cooperative behaviors are common in humans and are fundamental to our society. Theoretical and experimental studies have modeled environments in which the behaviors of humans, or agents, have been restricted to analyze their social behavior. However, it is important that such studies are generalized to less restrictive environments to understand human society. Social network games (SNGs) provide a particularly powerful tool for the quantitative study of human behavior. In SNGs, numerous players can behave more freely than in the environments used in previous studies; moreover, their relationships include apparent conflicts of interest and every action can be recorded. We focused on reciprocal altruism, one of the mechanisms that generate cooperative behavior. This study aims to investigate cooperative behavior based on reciprocal altruism in a less restrictive environment. For this purpose, we analyzed the social behavior underlying such cooperative behavior in an SNG. We focused on a game scenario in which the relationship between the players was similar to that in the Leader game. We defined cooperative behaviors by constructing a payoff matrix in the scenario. The results showed that players maintained cooperative behavior based on reciprocal altruism, and cooperators received more advantages than noncooperators. We found that players constructed reciprocal relationships based on two types of interactions, cooperative behavior and unproductive communication.
△ Less
Submitted 8 November, 2016; v1 submitted 21 October, 2015;
originally announced October 2015.
-
220 fs Er-Yb:glass laser mode-locked by a broadband low-loss Si/Ge saturable absorber
Authors:
F. J. Grawert,
S. Akiyama,
F. O. Ilday,
J. Liu,
J. T. Gopinath,
H. M. Shen,
K. Wada,
E. P. Ippen,
L. C. Kimerling,
F. X. Kaertner
Abstract:
We demonstrate femtosecond performance of an ultra-broadband high-index-contrast saturable Bragg reflector consisting of a silicon/silicon-dioxide/germanium structure that is fully compatible with CMOS processing. This device offers a reflectivity bandwidth of over 700 nm and sub-picosecond recovery time of the saturable loss. It is used to achieve mode-locking of an Er-Yb:glass laser centered a…
▽ More
We demonstrate femtosecond performance of an ultra-broadband high-index-contrast saturable Bragg reflector consisting of a silicon/silicon-dioxide/germanium structure that is fully compatible with CMOS processing. This device offers a reflectivity bandwidth of over 700 nm and sub-picosecond recovery time of the saturable loss. It is used to achieve mode-locking of an Er-Yb:glass laser centered at 1540 nm, generating 220 fs pulses, with the broadest output spectrum to date.
△ Less
Submitted 25 November, 2004;
originally announced November 2004.
