-
Laplace-like resonances with tidal effects
Authors:
A. Celletti,
E. Karampotsiou,
C. Lhotka,
G. Pucacco,
M. Volpi
Abstract:
We generalize the Laplace resonance among three satellites, S1, S2 , and S3, by considering different ratios of the mean-longitude variations. These resonances, which we call Laplace-like, are classified as first order in the cases of the 2:1&2:1, 3:2&3:2, and 2:1&3:2 resonances, second order in the case of the 3:1&3:1 resonance, and mixed order in the case of the 2:1&3:1 resonance. We consider a…
▽ More
We generalize the Laplace resonance among three satellites, S1, S2 , and S3, by considering different ratios of the mean-longitude variations. These resonances, which we call Laplace-like, are classified as first order in the cases of the 2:1&2:1, 3:2&3:2, and 2:1&3:2 resonances, second order in the case of the 3:1&3:1 resonance, and mixed order in the case of the 2:1&3:1 resonance. We consider a model that includes the gravitational interaction with the central body together with the effect due to its oblateness, the mutual gravitational influence of the satellites S1, S2, and S3 and the secular gravitational effect of a fourth satellite S 4 , which plays the role of Callisto in the Galilean system. In addition, we consider the dissipative effect due to the tidal torque between the inner satellite and the central body. We investigate these Laplace-like resonances by studying different aspects: (i) we study the survival of the resonances when the dissipation is included, taking two different expressions for the dissipative effect in the case of a fast- or a slowly rotating central body, (ii) we investigate the behavior of the Laplace-like resonances when some parameters are varied, specifically, the oblateness coefficient, the semimajor axes, and the eccentricities of the satellites, (iii) we analyze the linear stability of first-order resonances for different values of the parameters, and (iv) we also include the full gravitational interaction with S 4 to analyze its possible capture into resonance. The results show a marked difference between first-, second-, and mixed-order resonances, which might find applications when the evolutionary history of the satellites in the Solar System are studied, and also in possible actual configurations of extrasolar planetary systems.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
Sensing Strain-induced Symmetry Breaking by Reflectance Anisotropy Spectroscopy
Authors:
M. Volpi,
S. Beck,
A. Hampel,
H. Galinski,
A. Sologubenko,
R. Spolenak
Abstract:
Intentional breaking of the lattice symmetry in solids is a key concept to alter the properties of materials by modifying their electronic band structure. However, the correlation of strain-induced effects and breaking of the lattice symmetry is often indirect, resorting to vibrational spectroscopic techniques such as Raman scattering. Here, we demonstrate that reflectance anisotropy spectroscopy…
▽ More
Intentional breaking of the lattice symmetry in solids is a key concept to alter the properties of materials by modifying their electronic band structure. However, the correlation of strain-induced effects and breaking of the lattice symmetry is often indirect, resorting to vibrational spectroscopic techniques such as Raman scattering. Here, we demonstrate that reflectance anisotropy spectroscopy (RAS), which directly depends on the complex dielectric function, enables the direct observation of electronic band structure modulation. Studying the strain-induced symmetry breaking in copper, we show how uniaxial strain lifts the degeneracy of states in the proximity of the both L and X symmetry points, thus altering the matrix element for interband optical transitions, directly observable in RAS. We corroborate our experimental results by analysing the strain-induced changes in the electronic structure based on ab-initio density functional theory calculations. The versatility to study breaking of the lattice symmetry by simple reflectance measurements opens up the possibility to gain a direct insight on the band-structure of other strain-engineered materials, such as graphene and two-dimensional (2D) transition metal dichalcogenides (TMDCs).
△ Less
Submitted 31 May, 2021; v1 submitted 9 May, 2021;
originally announced May 2021.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
A PMT-Block test bench
Authors:
P. Adragna,
A. Antonaki,
I. Boudagov,
V. Cavasinni,
D. Costanzo,
T. Del Prete,
A. Dotti,
D. Fassouliotis,
V. Giakoumopoulou,
N. Giokaris,
C. Guicheney,
E. Karali,
J. Khubua,
M. Lebessi,
A. Lupi,
A. Manoussakis,
E. Mazzoni,
I. Minashvili,
M. Morphi,
G. F. Pagani,
R. Paoletti,
D. Rizzi,
C. Roda,
F. Sarri,
Ath. Staveris-Polykalas
, et al. (8 additional authors not shown)
Abstract:
The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called {\it PMT-Block}. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a {\it 3-in-1} card, which provides sha**, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block…
▽ More
The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called {\it PMT-Block}. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a {\it 3-in-1} card, which provides sha**, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block test bench has been developed for this purpose. This test bench is a system which allows fast, albeit accurate enough, measurements of the main properties of a complete PMT-Block. The system, both hardware and software, and the protocol used for the PMT-Blocks characterisation are described in detail in this report. The results obtained in the test of about 10000 PMT-Blocks needed for the instrumentation of the ATLAS (LHC-CERN) hadronic Tile Calorimeter are also reported.
△ Less
Submitted 8 May, 2006;
originally announced May 2006.