-
Minimization of magnetic forces on Stellarator coils
Authors:
Rémi Robin,
Francesco Volpe
Abstract:
Magnetic confinement devices for nuclear fusion can be large and expensive. Compact stellarators are promising candidates for costreduction, but introduce new difficulties: confinement in smaller volumes requires higher magnetic field, which calls for higher coil-currents and ultimately causes higher Laplace forces on the coils-if everything else remains the same. This motivates the inclusion of f…
▽ More
Magnetic confinement devices for nuclear fusion can be large and expensive. Compact stellarators are promising candidates for costreduction, but introduce new difficulties: confinement in smaller volumes requires higher magnetic field, which calls for higher coil-currents and ultimately causes higher Laplace forces on the coils-if everything else remains the same. This motivates the inclusion of force reduction in stellarator coil optimization. In the present paper we consider a coil winding surface, we prove that there is a natural and rigorous way to define the Laplace force (despite the magnetic field discontinuity across the current-sheet), we provide examples of cost associated (peak force, surface-integral of the force squared) and discuss easy generalizations to parallel and normal force-components, as these will be subject to different engineering constraints. Such costs can then be easily added to the figure of merit in any multi-objective stellarator coil optimization code. We demonstrate this for a generalization of the REGCOIL code [1], which we rewrote in python, and provide numerical examples for the NCSX (now QUASAR) design. We present results for various definitions of the cost function, including peak force reductions by up to 40 %, and outline future work for further reduction.
△ Less
Submitted 24 March, 2021;
originally announced March 2021.
-
Simultaneous iterative learning control of mode entrainment and error field
Authors:
Wilkie Choi,
Francesco Volpe
Abstract:
It is shown that static error fields (EFs) can severely limit the maximum rotation frequency achievable in mode entrainment by applied rotating fields. It is also shown that the rotation non-uniformities caused by an EF can be used to diagnose and correct said EF in real time. Simulations using typical DIII-D data show that this can be achieved within a small number of mode rotation periods by an…
▽ More
It is shown that static error fields (EFs) can severely limit the maximum rotation frequency achievable in mode entrainment by applied rotating fields. It is also shown that the rotation non-uniformities caused by an EF can be used to diagnose and correct said EF in real time. Simulations using typical DIII-D data show that this can be achieved within a small number of mode rotation periods by an iterative learning control algorithm. In addition to rapidly correcting the EF, this gives access to high entrainment frequencies that would not be accessible otherwise, and paves the way to rotational stabilization and improved mode control.
△ Less
Submitted 12 December, 2018;
originally announced December 2018.
-
Large vacuum flux surfaces generated by tilted planar coils
Authors:
Jessica L. Li,
Jacob Austin,
Ben Y. Israeli,
Kenneth C. Hammond,
Francesco A. Volpe
Abstract:
Helical equilibria can be generated by arrangements of planar coils similar to tokamaks, but without a central solenoid and with the toroidal field (TF) coils tilted with respect to the vertical. This is known from earlier numerical works, e.g. P.E. Moroz, Phys.Plasmas 2, 4269 (1995). However, such concept tends to need large coils (of low aspect ratio) but form small plasmas (of large aspect rati…
▽ More
Helical equilibria can be generated by arrangements of planar coils similar to tokamaks, but without a central solenoid and with the toroidal field (TF) coils tilted with respect to the vertical. This is known from earlier numerical works, e.g. P.E. Moroz, Phys.Plasmas 2, 4269 (1995). However, such concept tends to need large coils (of low aspect ratio) but form small plasmas (of large aspect ratio). Here it is numerically shown that larger, more attractive vacuum flux surfaces -- relative to the size of the device -- can be generated by carefully optimizing the inclination of the TF coils and currents in the various coil-sets. Vacuum configurations of aspect ratios as low as 4 are found for 6 tilted TF circular coils. Higher numbers of TF coils have advantages (smaller effective ripple) and disadvantages (lower rotational transform, smaller plasma). Finally, the aspect-ratio $A$ of the vacuum flux surfaces is quantified as a function of the ratio $A_c$ of the coil-radius to the radial location of the coil-center. It is found that, in order to minimize $A$, it is beneficial to interlink or marginally interlink the TF coils ($A_c \lesssim 1$).
△ Less
Submitted 10 December, 2018; v1 submitted 27 September, 2018;
originally announced September 2018.
-
Feedforward and feedback control of locked mode phase and rotation in DIII-D with application to modulated ECCD experiments
Authors:
Wilkie Choi,
R. J. La Haye,
M. J. Lanctot,
K. E. J. Olofsson,
E. J. Strait,
R. Sweeney,
F. A. Volpe
Abstract:
The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. A…
▽ More
The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. Additionally, for the first time, the phase of the perturbation was optimized in real-time, in feedback with magnetic measurements, in order for the mode's phase to closely match a prescribed phase, as a function of time. Experimental results confirm the capability to hold the mode in a given fixed-phase or to rotate it at up to 20 Hz with good uniformity. The control coil currents utilized in the experiments agree with the requirements estimated by an electromechanical model. Moreover, controlled rotation at 20 Hz was combined with Electron Cyclotron Current Drive (ECCD) modulated at the same frequency. This is simpler than regulating the ECCD modulation in feedback with spontaneous mode rotation, and enables repetitive, reproducible ECCD deposition at or near the island O-point, X-point and locations in between, for careful studies of how this affects the island stability. Current drive was found to be radially misaligned relative to the island, and resulting growth and shrinkage of islands matched expectations of the Modified Rutherford Equation for some discharges presented here. Finally, simulations predict the as designed ITER 3D coils can entrain a small island at sub-10 Hz frequencies.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Overdense microwave plasma heating in the CNT stellarator
Authors:
K. C. Hammond,
R. R. Diaz-Pacheco,
A. Koehn,
F. A. Volpe,
Y. Wei
Abstract:
Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional dam**…
▽ More
Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional dam** of the X-mode at the upper hybrid resonant layer. The X-mode reaches that location by tunneling, mode-conversions or after polarization-scrambling reflections off the wall and in-vessel coils, regardless of the initial launch being in O- or X-mode. This interpretation was confirmed by full-wave numerical simulations. Also, as the CNT plasma is not completely ionized at these low microwave power levels, electron density was shown to increase with power. A dependence on magnetic field strength was also observed (for O-mode launch) and discussed.
△ Less
Submitted 8 August, 2017;
originally announced August 2017.
-
Passive and active electromagnetic stabilization of free-surface liquid metal flows
Authors:
S. M. H. Mirhoseini,
R. R. Diaz-Pacheco,
F. A. Volpe
Abstract:
Free-surface liquid metal flows tend to be uneven due to instabilities and other effects. Some applications, however, require constant, uniform liquid metal thickness. This is for example the case of liquid walls in nuclear fusion reactors. With this motivation, here we present experimental results on the stabilization of a free-surface flow of Galinstan. The flow was sustained by an electromagnet…
▽ More
Free-surface liquid metal flows tend to be uneven due to instabilities and other effects. Some applications, however, require constant, uniform liquid metal thickness. This is for example the case of liquid walls in nuclear fusion reactors. With this motivation, here we present experimental results on the stabilization of a free-surface flow of Galinstan. The flow was sustained by an electromagnetic induction pump featuring rotating permanent magnets. Evidence is reported of the flowing Galinstan layer becoming flatter in the presence of a sufficiently strong magnetic field, either alone (passive stabilization) or in combination with an electrical current passing through the liquid metal (active stabilization). The results are interpreted in terms of an effective viscosity and effective gravity, respectively.
△ Less
Submitted 3 February, 2017;
originally announced February 2017.
-
Prospects for a dominantly microwave-diagnosed magnetically confined fusion reactor
Authors:
Francesco A. Volpe
Abstract:
Compared to present experiments, tokamak and stellarator reactors will be subject to higher heat loads, sputtering, erosion and subsequent coating, tritium retention, higher neutron fluxes, and a number of radiation effects. Additionally, neutral beam penetration in tokamak reactors will only be limited to the plasma edge. As a result, several optical, beam-based and magnetic diagnostics of today'…
▽ More
Compared to present experiments, tokamak and stellarator reactors will be subject to higher heat loads, sputtering, erosion and subsequent coating, tritium retention, higher neutron fluxes, and a number of radiation effects. Additionally, neutral beam penetration in tokamak reactors will only be limited to the plasma edge. As a result, several optical, beam-based and magnetic diagnostics of today's plasmas might not be applicable to tomorrow's reactors, but the present discussion suggests that reactors could largely rely on microwave diagnostics, including techniques based on mode conversions and Collective Thomson Scattering.
△ Less
Submitted 11 January, 2017;
originally announced January 2017.
-
High-$β$ equilibrium and ballooning stability of the low aspect ratio CNT stellarator
Authors:
K. C. Hammond,
S. A. Lazerson,
F. A. Volpe
Abstract:
The existence and ballooning-stability of low aspect ratio stellarator equilibria is predicted for CNT with the aid of 3D numerical tools. In addition to having a low aspect ratio, CNT is characterized by a low magnetic field and small plasma volume. Also, highly overdense plasmas were recently heated in CNT by means of microwaves. These characteristics suggest that CNT might attain relatively hig…
▽ More
The existence and ballooning-stability of low aspect ratio stellarator equilibria is predicted for CNT with the aid of 3D numerical tools. In addition to having a low aspect ratio, CNT is characterized by a low magnetic field and small plasma volume. Also, highly overdense plasmas were recently heated in CNT by means of microwaves. These characteristics suggest that CNT might attain relatively high values of plasma $β$ and thus be of use in the experimental study of stellarator stability to high-$β$ instabilities such as ballooning modes. As a first step in that direction, here the ballooning stability limit is found numerically. Depending on the particular magnetic configuration we expect volume-averaged $β$ limits in the range 0.9-3.0%, and possibly higher, and observe indications of a second region of ballooning stability. As the aspect ratio is reduced, stability is found to increase in some configurations and decrease in others. Energy-balance estimates using stellarator scaling laws indicate that the lower $β$ limit may be attainable with overdense heating at powers of of 40 to 100 kW. The present study serves the additional purpose of testing VMEC and other stellarator codes at high values of $β$ and at low aspect ratios. For this reason, the study was carried out both for free boundary, for maximum fidelity to experiment, as well as with a fixed boundary, as a numerical test.
△ Less
Submitted 11 April, 2017; v1 submitted 29 December, 2016;
originally announced December 2016.
-
Statistical analysis of $m/n$ = 2/1 locked and quasi-stationary modes with rotating precursors at DIII-D
Authors:
R. Sweeney,
W. Choi,
R. J. La Haye,
S. Mao,
K. E. J. Olofsson,
F. A. Volpe,
the DIII-D Team
Abstract:
A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A para…
▽ More
A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A parameter formulated by the plasma internal inductance $l_i$ divided by the safety factor at 95% of the poloidal flux, $q_{95}$, is found to exhibit predictive capability over whether a locked mode will cause a disruption or not, and does so up to hundreds of milliseconds before the disruption. Within 20 ms of the disruption, the shortest distance between the island separatrix and the unperturbed last closed flux surface, referred to as $d_{edge}$, performs comparably to $l_i/q_{95}$ in its ability to discriminate disruptive locked modes. Out of all parameters considered, $d_{edge}$ also correlates best with the duration of the locked mode. Within 50 ms of a locked mode disruption, average behavior includes exponential growth of the $n=1$ perturbed field, which might be due to the 2/1 locked mode. Even assuming the aforementioned 2/1 growth, disruptivity following a locked mode shows little dependence on island width up to 20 ms before the disruption. Separately, greater deceleration of the rotating precursor is observed when the wall torque is large. At locking, modes are often observed to align with a residual error field. Timescales associated with the mode evolution are also studied and dictate the response times necessary for disruption avoidance and mitigation.
△ Less
Submitted 28 November, 2016; v1 submitted 13 June, 2016;
originally announced June 2016.
-
Full-Wave Feasibility Study of Anti-Radar Diagnostic of Magnetic Field Based on O-X Mode Conversion and Oblique Reflectometry Imaging
Authors:
O. Meneghini,
F. A. Volpe
Abstract:
An innovative millimeter wave diagnostic is proposed to measure the local magnetic field and edge current as a function of the minor radius in the tokamak pedestal region. The idea is to identify the direction of minimum reflectivity at the O-mode cutoff layer. Correspondingly, the transmissivity due to O-X mode conversion is maximum. That direction, and the angular map of reflectivity around it,…
▽ More
An innovative millimeter wave diagnostic is proposed to measure the local magnetic field and edge current as a function of the minor radius in the tokamak pedestal region. The idea is to identify the direction of minimum reflectivity at the O-mode cutoff layer. Correspondingly, the transmissivity due to O-X mode conversion is maximum. That direction, and the angular map of reflectivity around it, contain information on the magnetic field vector B at the cutoff layer. Probing the plasma with different wave frequencies provides the radial profile of B. Full-wave finite-element simulations are presented here in 2D slab geometry. Modeling confirms the existence of a minimum in reflectivity that depends on the magnetic field at the cutoff, as expected from mode conversion physics, giving confidence in the feasibility of the diagnostic. The proposed reflectometric approach is expected to yield superior signal-to-noise ratio and to access wider ranges of density and magnetic field, compared with related radiometric techniques that require the plasma to emit Electron Bernstein Waves. Due to computational limitations, frequencies of 10-20 GHz were considered in this initial study. Frequencies above the edge electron-cyclotron frequency (f>28 GHz here) would be preferable for the experiment, because the upper hybrid resonance and right cutoff would lie in the plasma, and would help separate the O-mode of interest from spurious X-waves.
△ Less
Submitted 13 June, 2016;
originally announced June 2016.
-
Space- and Time-resolved Resistive Measurement of Liquid Metal Wall Thickness
Authors:
S. M. H. Mirhoseini,
F. A. Volpe
Abstract:
In a fusion reactor internally coated with liquid metal, it will be important to diagnose the thickness of the liquid at various locations in the vessel, as a function of time, and possibly respond to counteract undesired bulging or depletion. The electrical conductance between electrodes immersed in the liquid metal can be used as a simple proxy for the local thickness. Here a matrix of electrode…
▽ More
In a fusion reactor internally coated with liquid metal, it will be important to diagnose the thickness of the liquid at various locations in the vessel, as a function of time, and possibly respond to counteract undesired bulging or depletion. The electrical conductance between electrodes immersed in the liquid metal can be used as a simple proxy for the local thickness. Here a matrix of electrodes is shown to provide spatially resolved measurements of liquid metal thickness in the absence of plasma. First a theory is developed for mxn electrodes, and then it is experimentally demonstrated for 3x1 electrodes. The experiments were carried out with Galinstan, but are easily extended to Lithium or other liquid metals.
△ Less
Submitted 13 July, 2016; v1 submitted 13 June, 2016;
originally announced June 2016.
-
Onion-peeling inversion of stellarator images
Authors:
K. C. Hammond,
R. Diaz-Pacheco,
Y. Kornbluth,
F. A. Volpe,
Y. Wei
Abstract:
An onion-peeling technique is developed for inferring the emissivity profile of a stellarator plasma from a two-dimensional image acquired through a CCD or CMOS camera. Each pixel in the image is treated as an integral of emission along a particular line-of-sight. Additionally, the flux surfaces in the plasma are partitioned into discrete layers, each of which is assumed to have uniform emissivity…
▽ More
An onion-peeling technique is developed for inferring the emissivity profile of a stellarator plasma from a two-dimensional image acquired through a CCD or CMOS camera. Each pixel in the image is treated as an integral of emission along a particular line-of-sight. Additionally, the flux surfaces in the plasma are partitioned into discrete layers, each of which is assumed to have uniform emissivity. If the topology of the flux surfaces is known, this construction permits the development of a system of linear equations that can be solved for the emissivity of each layer. We present initial results of this method applied to wide-angle visible images of the CNT stellarator plasma.
△ Less
Submitted 12 July, 2016; v1 submitted 9 June, 2016;
originally announced June 2016.
-
Resistive sensor and electromagnetic actuator for feedback stabilization of liquid metal walls in fusion reactors
Authors:
S. M. H. Mirhoseini,
F. A. Volpe
Abstract:
Liquid metal walls in fusion reactors will be subject to instabilities, turbulence, induced currents, error fields and temperature gradients that will make them locally bulge, thus entering in contact with the plasma, or deplete, hence exposing the underlying solid substrate. To prevent this, research has begun to actively stabilize static or flowing liquid metal layers by locally applying forces…
▽ More
Liquid metal walls in fusion reactors will be subject to instabilities, turbulence, induced currents, error fields and temperature gradients that will make them locally bulge, thus entering in contact with the plasma, or deplete, hence exposing the underlying solid substrate. To prevent this, research has begun to actively stabilize static or flowing liquid metal layers by locally applying forces in feedback with thickness measurements. Here we present resistive sensors of liquid metal thickness and demonstrate jxB actuators, to locally control it.
△ Less
Submitted 17 August, 2016; v1 submitted 25 April, 2016;
originally announced April 2016.
-
Local measurement of error field using naturally rotating tearing mode dynamics in EXTRAP T2R
Authors:
R. M. Sweeney,
L. Frassinetti,
P. Brunsell,
R. Fridström,
F. A. Volpe
Abstract:
An error field (EF) detection technique using the amplitude modulation of a naturally rotating tearing mode (TM) is developed and validated in the EXTRAP T2R reversed field pinch. The technique was used to identify intrinsic EFs of $m/n = 1/-12$, where $m$ and $n$ are the poloidal and toroidal mode numbers. The effect of the EF and of a resonant magnetic perturbation (RMP) on the TM, in particular…
▽ More
An error field (EF) detection technique using the amplitude modulation of a naturally rotating tearing mode (TM) is developed and validated in the EXTRAP T2R reversed field pinch. The technique was used to identify intrinsic EFs of $m/n = 1/-12$, where $m$ and $n$ are the poloidal and toroidal mode numbers. The effect of the EF and of a resonant magnetic perturbation (RMP) on the TM, in particular on amplitude modulation, is modeled with a first-order solution of the Modified Rutherford Equation. In the experiment, the TM amplitude is measured as a function of the toroidal angle as the TM rotates rapidly in the presence of an unknown EF and a known, deliberately applied RMP. The RMP amplitude is fixed while the toroidal phase is varied from one discharge to the other, completing a full toroidal scan. Using three such scans with different RMP amplitudes, the EF amplitude and phase are inferred from the phases at which the TM amplitude maximizes. The estimated EF amplitude is consistent with other estimates (e.g. based on the best EF-cancelling RMP, resulting in the fastest TM rotation). A passive variant of this technique is also presented, where no RMPs are applied, and the EF phase is deduced.
△ Less
Submitted 4 June, 2016; v1 submitted 1 April, 2016;
originally announced April 2016.
-
Experimental and numerical study of error fields in the CNT stellarator
Authors:
K. C. Hammond,
A. Anichowski,
P. W. Brenner,
T. S. Pedersen,
S. Raftopoulos,
P. Traverso,
F. A. Volpe
Abstract:
Sources of error fields were indirectly inferred in a stellarator by reconciling computed and numerical flux surfaces. Sources considered so far include the displacements and tilts (but not the deformations, yet) of the four circular coils featured in the simple CNT stellarator. The flux surfaces were measured by means of an electron beam and phosphor rod, and were computed by means of a Biot-Sava…
▽ More
Sources of error fields were indirectly inferred in a stellarator by reconciling computed and numerical flux surfaces. Sources considered so far include the displacements and tilts (but not the deformations, yet) of the four circular coils featured in the simple CNT stellarator. The flux surfaces were measured by means of an electron beam and phosphor rod, and were computed by means of a Biot-Savart field-line tracing code. If the ideal coil locations and orientations are used in the computation, agreement with measurements is poor. Discrepancies are ascribed to errors in the positioning and orientation of the in-vessel interlocked coils. To that end, an iterative numerical method was developed. A Newton-Raphson algorithm searches for the coils' displacements and tilts that minimize the discrepancy between the measured and computed flux surfaces. This method was verified by misplacing and tilting the coils in a numerical model of CNT, calculating the flux surfaces that they generated, and testing the algorithm's ability to deduce the coils' displacements and tilts. Subsequently, the numerical method was applied to the experimental data, arriving at a set of coil displacements whose resulting field errors exhibited significantly improved quantitative and qualitative agreement with experimental results.
△ Less
Submitted 10 June, 2016; v1 submitted 15 February, 2016;
originally announced February 2016.
-
Avoiding Tokamak disruptions by applying static magnetic fields that align locked modes with stabilizing wave-driven currents
Authors:
F. A. Volpe,
A. Hyatt,
R. J. La Haye,
M. J. Lanctot,
J. Lohr,
R. Prater,
E. J. Strait,
A. Welander
Abstract:
Non-rotating (`locked') magnetic islands often lead to complete losses of confinement in tokamak plasmas, called major disruptions. Here locked islands were suppressed for the first time, by a combination of applied three-dimensional magnetic fields and injected millimetre waves. The applied fields were used to control the phase of locking and so align the island O-point with the region where the…
▽ More
Non-rotating (`locked') magnetic islands often lead to complete losses of confinement in tokamak plasmas, called major disruptions. Here locked islands were suppressed for the first time, by a combination of applied three-dimensional magnetic fields and injected millimetre waves. The applied fields were used to control the phase of locking and so align the island O-point with the region where the injected waves generated non-inductive currents. This resulted in stabilization of the locked island, disruption avoidance, recovery of high confinement and high pressure, in accordance with the expected dependencies upon wave power and relative phase between O-point and driven current.
△ Less
Submitted 29 October, 2015;
originally announced October 2015.
-
Huygens-Fresnel wavefront tracing in non-uniform media
Authors:
F. A. Volpe,
P. -D. Letourneau,
A. Zhao
Abstract:
We present preliminary results on a novel numerical method describing wave propagation in non-uniform media. Following Huygens-Fresnel' principle, we model the wavefront as an array of point sources that emit wavelets, which interfere. We then identify a set of new points where the electric field has equal phase. In fact, without losing generality, we find zeros of the electric field, by means of…
▽ More
We present preliminary results on a novel numerical method describing wave propagation in non-uniform media. Following Huygens-Fresnel' principle, we model the wavefront as an array of point sources that emit wavelets, which interfere. We then identify a set of new points where the electric field has equal phase. In fact, without losing generality, we find zeros of the electric field, by means of the bisection method. This obviously corresponds to a specific phase-advance, but is easily generalized, e.g. by phase-shifting all sources. The points found form the new wavefront. One of the advantages of the method is that it includes diffraction. Two examples provided are diffraction around an obstacle and the finite waist of a focused Gaussian beam. Refraction is also successfully modeled, both in slowly-varying media as well as in the presence of discontinuities. The calculations were performed in two dimensions, but can be easily extended to three dimensions. We also discuss the extension to anisotropic, birefringent, absorbing media.
△ Less
Submitted 12 June, 2016; v1 submitted 9 September, 2015;
originally announced September 2015.
-
Conceptual design of first toroidal electron cyclotron resonance ion source and modeling of ion extraction from it
Authors:
C. Caliri,
D. Mascali,
F. A. Volpe
Abstract:
Electron Cyclotron Resonance Ion Sources (ECRIS) progressed to higher and higher ion currents and charge states by adopting stronger magnetic fields (beneficial for confinement) and proportionally higher ECR frequencies. Further improvements would require the attainment of "triple products" of density, temperature and confinement time comparable with major fusion experiments. For this, we propose…
▽ More
Electron Cyclotron Resonance Ion Sources (ECRIS) progressed to higher and higher ion currents and charge states by adopting stronger magnetic fields (beneficial for confinement) and proportionally higher ECR frequencies. Further improvements would require the attainment of "triple products" of density, temperature and confinement time comparable with major fusion experiments. For this, we propose a new, toroidal rather than linear, ECRIS geometry, which would at the same time improve confinement and make better use of the magnetic field. Ion extraction is more complicated than from a linear device, but feasible, as our modelling suggests: single-particle tracings showed successful extraction by at least two techniques, making use respectively of a magnetic extractor and of ExB drifts. Additional techniques are briefly discussed.
△ Less
Submitted 2 February, 2015;
originally announced February 2015.
-
Metamaterial lens of specifiable frequency-dependent focus and adjustable aperture for electron cyclotron emission in the DIII-D tokamak
Authors:
K. C. Hammond,
W. J. Capecchi,
S. D. Massidda,
F. A. Volpe
Abstract:
Electron Cyclotron Emission (ECE) of different frequencies originates at different locations in non-uniformly magnetized plasmas. For simultaneous observation of multiple ECE frequencies from the outside edge of a toroidal plasma confinement device (e.g. a tokamak), the focal length of the collecting optics should increase with the frequency to maximize the resolution on a line of sight along the…
▽ More
Electron Cyclotron Emission (ECE) of different frequencies originates at different locations in non-uniformly magnetized plasmas. For simultaneous observation of multiple ECE frequencies from the outside edge of a toroidal plasma confinement device (e.g. a tokamak), the focal length of the collecting optics should increase with the frequency to maximize the resolution on a line of sight along the magnetic field gradient. Here we present the design and numerical study of a zoned metamaterial lens with such characteristics, for possible deployment with the 83-130 GHz ECE radiometer in the DIII-D tokamak. The lens consists of a concentric array of miniaturized element phase-shifters. These were reverse-engineered starting from the desired Gaussian beam waist locations and further optimized to account for diffraction and finite-aperture effects that tend to displace the waist. At the same time we imposed high and uniform transmittance, averaged over all phase-shifters. The focal length is shown to increase from 1.37 m to 1.97 m over the frequency range of interest, as desired for low-field DIII-D discharges (B = -1.57 T). Retracting the lens to receded positions rigidly moves the waists accordingly, resulting in a good match -within a fraction of the Rayleigh length- of the EC-emitting layer positions at higher fields (up to B = -2.00 T). Further, it is shown how varying the lens aperture might move the waists "non-rigidly" to better match the non-rigid movement of the EC-emitting layers with the magnetic field. The numerical method presented is very general and can be used to engineer any dependence of the focal length on the frequency, including zero or minimal chromatic aberration.
△ Less
Submitted 13 October, 2014;
originally announced October 2014.
-
Proto-CIRCUS Tilted-Coil Tokamak-Torsatron Hybrid: Design and Construction
Authors:
A. W. Clark,
M. Doumet,
K. C. Hammond,
Y. Kornbluth,
D. A. Spong,
R. Sweeney,
F. A. Volpe
Abstract:
We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-l…
▽ More
We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-line tracing and equilibrium calculations. The device is expected to operate at lower plasma current than a tokamak of comparable size and magnetic field, which might have interesting implications for disruptions and steady-state operation. Additionally, the toroidal magnetic ripple is less pronounced than in an equivalent tokamak in which the coils are not tilted. The tilted coils are interlocked, resulting in a relatively low aspect ratio, and can be moved, both radially and in tilt angle, between discharges. This capability will be exploited for detailed comparisons between calculations and field-line map** measurements. Such comparisons will reveal whether this relatively simple concept can generate the expected rotational transform.
△ Less
Submitted 8 October, 2014;
originally announced October 2014.
-
Multi-pole multi-zero frequency-independent phase-shifter
Authors:
M. A. Bitar,
A. Gallo,
F. A. Volpe
Abstract:
A multi-pole, multi-zero design allowed realizing a "true" phase-shifter (not time-delayer) of flat frequency-response over more than 3 decades (30Hz-100kHz), which can be extended to higher frequencies or broader bands thanks to a modular design. Frequency-dependent optimization of a single resistance made also the gain flat to within few percents. The frequency-independent phase-shifter presente…
▽ More
A multi-pole, multi-zero design allowed realizing a "true" phase-shifter (not time-delayer) of flat frequency-response over more than 3 decades (30Hz-100kHz), which can be extended to higher frequencies or broader bands thanks to a modular design. Frequency-dependent optimization of a single resistance made also the gain flat to within few percents. The frequency-independent phase-shifter presented can find application in any experiment in which an action needs to be taken (e.g. a measurement needs to be performed) at a fixed phase-delay relative to an event, regardless of how rapidly the system rotates or oscillates.
△ Less
Submitted 27 February, 2013;
originally announced February 2013.
-
Reverse Chromatic Aberration and its Numerical Optimization in a Metamaterial Lens
Authors:
W. J. Capecchi,
N. Behdad,
F. A. Volpe
Abstract:
In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequ…
▽ More
In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequency. It is proposed that such an artificial "reverse" chromatic aberration may optimize the transverse resolution of millimeter wave diagnostics of plasmas and be useful in compensating for the natural "ordinary" chromatic aberration of other components in an optical system. More generally, optimized chromatic aberration will allow to simultaneously focus on several objects located at different distances and emitting or reflecting at different frequencies.
△ Less
Submitted 27 February, 2013;
originally announced February 2013.
-
Oblique electron-cyclotron-emission radial and phase detector of rotating magnetic islands applied to alignment and modulation of electron-cyclotron-current-drive for neoclassical tearing mode stabilization
Authors:
F. Volpe,
M. E. Austin,
G. Campbell,
T. Deterly
Abstract:
A two channel oblique electron cyclotron emission (ECE) radiometer was installed on the DIII-D tokamak and interfaced to 4 gyrotrons. Oblique ECE was used to toroidally and radially localize rotating magnetic islands and so assist their electron cyclotron current drive (ECCD) stabilization. In particular, after manipulations operated by the interfacing analogue circuit, the oblique ECE signals dir…
▽ More
A two channel oblique electron cyclotron emission (ECE) radiometer was installed on the DIII-D tokamak and interfaced to 4 gyrotrons. Oblique ECE was used to toroidally and radially localize rotating magnetic islands and so assist their electron cyclotron current drive (ECCD) stabilization. In particular, after manipulations operated by the interfacing analogue circuit, the oblique ECE signals directly modulated the current drive in synch with the island rotation and in phase with the island O-point, for a more efficient stabilization. Apart from the different toroidal location, the diagnostic view is identical to the ECCD launch direction,which greatly simplified the real-time use of the signals. In fact, a simple toroidal extrapolation was sufficient to lock the modulation to the O-point phase. This was accomplished by a specially designed phase shifter of nearly flat response over the 1-7kHz range. Moreover, correlation analysis of two channels slightly above and below the ECCD frequency allowed checking the radial alignment to the island, based on the fact that for satisfactory alignment the two signals are out of phase.
△ Less
Submitted 27 February, 2013;
originally announced February 2013.
-
Error Field Assessment from Driven Rotation of Stable External Kinks at EXTRAP-T2R Reversed Field Pinch
Authors:
F. A. Volpe,
L. Frassinetti,
P. R. Brunsell,
J. R. Drake,
K. E. J. Olofsson
Abstract:
A new non-disruptive error field (EF) assessment technique not restricted to low density and thus low beta was demonstrated at the EXTRAP-T2R reversed field pinch. Stable and marginally stable external kink modes of toroidal mode number n=10 and n=8, respectively, were generated, and their rotation sustained, by means of rotating magnetic perturbations of the same n. Due to finite EFs, and in spit…
▽ More
A new non-disruptive error field (EF) assessment technique not restricted to low density and thus low beta was demonstrated at the EXTRAP-T2R reversed field pinch. Stable and marginally stable external kink modes of toroidal mode number n=10 and n=8, respectively, were generated, and their rotation sustained, by means of rotating magnetic perturbations of the same n. Due to finite EFs, and in spite of the applied perturbations rotating uniformly and having constant amplitude, the kink modes were observed to rotate non-uniformly and be modulated in amplitude. This behavior was used to precisely infer the amplitude and approximately estimate the toroidal phase of the EF. A subsequent scan permitted to optimize the toroidal phase. The technique was tested against deliberately applied as well as intrinsic error fields of n=8 and 10. Corrections equal and opposite to the estimated error fields were applied. The efficacy of the error compensation was indicated by the increased discharge duration and more uniform mode rotation in response to a uniformly rotating perturbation. The results are in good agreement with theory, and the extension to lower n, to tearing modes and to tokamaks, including ITER, is discussed.
△ Less
Submitted 27 February, 2013;
originally announced February 2013.
-
Magnetic Barriers and their q95 dependence at DIII-D
Authors:
F. A. Volpe,
J. Kessler,
H. Ali,
T. E. Evans,
A. Punjabi
Abstract:
It is well known that externally generated resonant magnetic perturbations (RMPs) can form islands in the plasma edge. In turn, large overlap** islands generate stochastic fields, which are believed to play a role in the avoidance and suppression of edge localized modes (ELMs) at DIII-D. However, large coalescing islands can also generate, in the middle of these stochastic regions, KAM surfaces…
▽ More
It is well known that externally generated resonant magnetic perturbations (RMPs) can form islands in the plasma edge. In turn, large overlap** islands generate stochastic fields, which are believed to play a role in the avoidance and suppression of edge localized modes (ELMs) at DIII-D. However, large coalescing islands can also generate, in the middle of these stochastic regions, KAM surfaces effectively acting as "barriers" against field-line dispersion and, indirectly, particle diffusion. It was predicted in [H. Ali and A. Punjabi, Plasma Phys. Control. Fusion 49 (2007), 1565-1582] that such magnetic barriers can form in piecewise analytic DIII-D plasma equilibria. In the present work, the formation of magnetic barriers at DIII-D is corroborated by field-line tracing calculations using experimentally constrained EFIT [L. Lao, et al., Nucl. Fusion 25, 1611 (1985)] DIII-D equilibria perturbed to include the vacuum field from the internal coils utilized in the experiments. According to these calculations, the occurrence and location of magnetic barriers depends on the edge safety factor q95. It was thus suggested that magnetic barriers might contribute to narrowing the edge stochastic layer and play an indirect role in the RMPs failing to control ELMs for certain values of q95. The analysis of DIII-D discharges where q95 was varied, however, does not show anti-correlation between barrier formation and ELM suppression.
△ Less
Submitted 8 November, 2011;
originally announced November 2011.
-
Full-wave modeling of the O-X mode conversion in the Pegasus Toroidal Experiment
Authors:
Alf Köhn,
Jonathan Jacquot,
Michael W. Bongard,
Sara Gallian,
Edward T. Hinson,
Francesco A. Volpe
Abstract:
The ordinary-extraordinary (O-X) mode conversion is modeled with the aid of a 2D full-wave code in the Pegasus Toroidal Experiment as a function of the launch angles. It is shown how the shape of the plasma density profile in front of the antenna can significantly influence the mode conversion efficiency and, thus, the generation of electron Bernstein waves (EBW). It is therefore desirable to cont…
▽ More
The ordinary-extraordinary (O-X) mode conversion is modeled with the aid of a 2D full-wave code in the Pegasus Toroidal Experiment as a function of the launch angles. It is shown how the shape of the plasma density profile in front of the antenna can significantly influence the mode conversion efficiency and, thus, the generation of electron Bernstein waves (EBW). It is therefore desirable to control the density profile in front of the antenna for successful operation of an EBW heating and current drive system. On the other hand, the conversion efficiency is shown to be resilient to vertical displacements of the plasma as large as \pm 10 cm.
△ Less
Submitted 6 June, 2016; v1 submitted 5 April, 2011;
originally announced April 2011.
-
A Spinning Mirror for Fast Angular Scans of EBW Emission for Magnetic Pitch Profile Measurement
Authors:
Francesco Volpe
Abstract:
A tilted spinning mirror rapidly steers the line of sight of the electron Bernstein wave (EBW) emission radiometer at the Mega Amp Spherical Tokamak (MAST). In order to resist high mechanical stresses at rotation speeds of up to 12,000 rpm and to avoid eddy current induced magnetic braking, the mirror consists of a glass-reinforced nylon substrate of a special self-balanced design, coated with a r…
▽ More
A tilted spinning mirror rapidly steers the line of sight of the electron Bernstein wave (EBW) emission radiometer at the Mega Amp Spherical Tokamak (MAST). In order to resist high mechanical stresses at rotation speeds of up to 12,000 rpm and to avoid eddy current induced magnetic braking, the mirror consists of a glass-reinforced nylon substrate of a special self-balanced design, coated with a reflecting layer. By completing an angular scan every 2.5-10ms, it allows one to characterize with good time resolution the Bernstein-extraordinary-ordinary mode-conversion efficiency as a function of the view angles. Angular maps of conversion efficiency are directly related to the magnetic pitch angle at the cutoff layer for the ordinary mode. Hence, measurements at various frequencies provide the safety factor profile at the plasma edge. Initial measurements and indications of the feasibility of the diagnostic are presented. Moreover, angular scans indicate the best launch conditions for EBW heating.
△ Less
Submitted 7 July, 2010;
originally announced July 2010.
-
Analytical Solution of the O-X Mode Conversion Problem
Authors:
F. Volpe
Abstract:
The excitation of a slow extraordinary wave in a overdense plasma from an ordinary wave im**ing on the critical layer in the plane spanned by the density gradient and magnetic field is solved analytically by formulating the problem in terms of a parabolic cylinder equation. A formula for the angular dependence of the transmission coefficient is derived.
The excitation of a slow extraordinary wave in a overdense plasma from an ordinary wave im**ing on the critical layer in the plane spanned by the density gradient and magnetic field is solved analytically by formulating the problem in terms of a parabolic cylinder equation. A formula for the angular dependence of the transmission coefficient is derived.
△ Less
Submitted 10 February, 2010; v1 submitted 23 July, 2009;
originally announced July 2009.
