-
Accelerating Multiphase Flow Simulations with Denoising Diffusion Model Driven Initializations
Authors:
Jaehong Chung,
Agnese Marcato,
Eric J. Guiltinan,
Tapan Mukerji,
Hari Viswanathan,
Yen Ting Lin,
Javier E. Santos
Abstract:
This study introduces a hybrid fluid simulation approach that integrates generative diffusion models with physics-based simulations, aiming at reducing the computational costs of flow simulations while still honoring all the physical properties of interest. These simulations enhance our understanding of applications such as assessing hydrogen and CO$_2$ storage efficiency in underground reservoirs…
▽ More
This study introduces a hybrid fluid simulation approach that integrates generative diffusion models with physics-based simulations, aiming at reducing the computational costs of flow simulations while still honoring all the physical properties of interest. These simulations enhance our understanding of applications such as assessing hydrogen and CO$_2$ storage efficiency in underground reservoirs. Nevertheless, they are computationally expensive and the presence of nonunique solutions can require multiple simulations within a single geometry. To overcome the computational cost hurdle, we propose a hybrid method that couples generative diffusion models and physics-based modeling. We introduce a system to condition the diffusion model with a geometry of interest, allowing to produce variable fluid saturations in the same geometry. While training the model, we simultaneously generate initial conditions and perform physics-based simulations using these conditions. This integrated approach enables us to receive real-time feedback on a single compute node equipped with both CPUs and GPUs. By efficiently managing these processes within one compute node, we can continuously evaluate performance and stop training when the desired criteria are met. To test our model, we generate realizations in a real Berea sandstone fracture which shows that our technique is up to 4.4 times faster than commonly used flow simulation initializations.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Learning the Factors Controlling Mineralization for Geologic Carbon Sequestration
Authors:
Aleksandra Pachalieva,
Jeffrey D. Hyman,
Daniel O'Malley,
Hari Viswanathan,
Gowri Srinivasan
Abstract:
We perform a set of flow and reactive transport simulations within three-dimensional fracture networks to learn the factors controlling mineral reactions. CO$_2$ mineralization requires CO$_2$-laden water, dissolution of a mineral that then leads to precipitation of a CO$_2$-bearing mineral. Our discrete fracture networks (DFN) are partially filled with quartz that gradually dissolves until it rea…
▽ More
We perform a set of flow and reactive transport simulations within three-dimensional fracture networks to learn the factors controlling mineral reactions. CO$_2$ mineralization requires CO$_2$-laden water, dissolution of a mineral that then leads to precipitation of a CO$_2$-bearing mineral. Our discrete fracture networks (DFN) are partially filled with quartz that gradually dissolves until it reaches a quasi-steady state. At the end of the simulation, we measure the quartz remaining in each fracture within the domain. We observe that a small backbone of fracture exists, where the quartz is fully dissolved which leads to increased flow and transport. However, depending on the DFN topology and the rate of dissolution, we observe a large variability of these changes, which indicates an interplay between the fracture network structure and the impact of geochemical dissolution. In this work, we developed a machine learning framework to extract the important features that support mineralization in the form of dissolution. In addition, we use structural and topological features of the fracture network to predict the remaining quartz volume in quasi-steady state conditions. As a first step to characterizing carbon mineralization, we study dissolution with this framework. We studied a variety of reaction and fracture parameters and their impact on the dissolution of quartz in fracture networks. We found that the dissolution reaction rate constant of quartz and the distance to the flowing backbone in the fracture network are the two most important features that control the amount of quartz left in the system. For the first time, we use a combination of a finite-volume reservoir model and graph-based approach to study reactive transport in a complex fracture network to determine the key features that control dissolution.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Reconstruction of Fields from Sparse Sensing: Differentiable Sensor Placement Enhances Generalization
Authors:
Agnese Marcato,
Daniel O'Malley,
Hari Viswanathan,
Eric Guiltinan,
Javier E. Santos
Abstract:
Recreating complex, high-dimensional global fields from limited data points is a grand challenge across various scientific and industrial domains. Given the prohibitive costs of specialized sensors and the frequent inaccessibility of certain regions of the domain, achieving full field coverage is typically not feasible. Therefore, the development of algorithms that intelligently improve sensor pla…
▽ More
Recreating complex, high-dimensional global fields from limited data points is a grand challenge across various scientific and industrial domains. Given the prohibitive costs of specialized sensors and the frequent inaccessibility of certain regions of the domain, achieving full field coverage is typically not feasible. Therefore, the development of algorithms that intelligently improve sensor placement is of significant value. In this study, we introduce a general approach that employs differentiable programming to exploit sensor placement within the training of a neural network model in order to improve field reconstruction. We evaluated our method using two distinct datasets; the results show that our approach improved test scores. Ultimately, our method of differentiable placement strategies has the potential to significantly increase data collection efficiency, enable more thorough area coverage, and reduce redundancy in sensor deployment.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Learning a General Model of Single Phase Flow in Complex 3D Porous Media
Authors:
Javier E. Santos,
Agnese Marcato,
Qinjun Kang,
Mohamed Mehana,
Daniel O'Malley,
Hari Viswanathan,
Nicholas Lubbers
Abstract:
Modeling effective transport properties of 3D porous media, such as permeability, at multiple scales is challenging as a result of the combined complexity of the pore structures and fluid physics - in particular, confinement effects which vary across the nanoscale to the microscale. While numerical simulation is possible, the computational cost is prohibitive for realistic domains, which are large…
▽ More
Modeling effective transport properties of 3D porous media, such as permeability, at multiple scales is challenging as a result of the combined complexity of the pore structures and fluid physics - in particular, confinement effects which vary across the nanoscale to the microscale. While numerical simulation is possible, the computational cost is prohibitive for realistic domains, which are large and complex. Although machine learning models have been proposed to circumvent simulation, none so far has simultaneously accounted for heterogeneous 3D structures, fluid confinement effects, and multiple simulation resolutions. By utilizing numerous computer science techniques to improve the scalability of training, we have for the first time developed a general flow model that accounts for the pore-structure and corresponding physical phenomena at scales from Angstrom to the micrometer. Using synthetic computational domains for training, our machine learning model exhibits strong performance (R$^2$=0.9) when tested on extremely diverse real domains at multiple scales.
△ Less
Submitted 22 October, 2023;
originally announced October 2023.
-
The Influence of Forebody Topology on Aerodynamic Drag and Aeroacoustics Characteristics of Squareback Vehicles using CAA
Authors:
H. Viswanathan,
K. K. Chode
Abstract:
This study numerically investigates the aerodynamic forces and flow-induced noise generated by SAE-T4, Ahmed, and Hybrid forebody shapes with a squareback vehicle configuration using SBES-FW-H. The results show significant differences in lift coefficients and the presence of a horseshoe vortex at the mirror, with smaller eddies that interact with A-pillar vortices, resulting in pronounced pressure…
▽ More
This study numerically investigates the aerodynamic forces and flow-induced noise generated by SAE-T4, Ahmed, and Hybrid forebody shapes with a squareback vehicle configuration using SBES-FW-H. The results show significant differences in lift coefficients and the presence of a horseshoe vortex at the mirror, with smaller eddies that interact with A-pillar vortices, resulting in pronounced pressure fluctuations and noise generation on the side window for the three configurations. Surprisingly, negligible differences in aerodynamic drag and radiated sound are predicted despite these effects.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Bayesian Learning of Gas Transport in Three-Dimensional Fracture Networks
Authors:
Yingqi Shi,
Donald J. Berry,
John Kath,
Shams Lodhy,
An Ly,
Allon G. Percus,
Jeffrey D. Hyman,
Kelly Moran,
Justin Strait,
Matthew R. Sweeney,
Hari S. Viswanathan,
Philip H. Stauffer
Abstract:
Modeling gas flow through fractures of subsurface rock is a particularly challenging problem because of the heterogeneous nature of the material. High-fidelity simulations using discrete fracture network (DFN) models are one methodology for predicting gas particle breakthrough times at the surface, but are computationally demanding. We propose a Bayesian machine learning method that serves as an e…
▽ More
Modeling gas flow through fractures of subsurface rock is a particularly challenging problem because of the heterogeneous nature of the material. High-fidelity simulations using discrete fracture network (DFN) models are one methodology for predicting gas particle breakthrough times at the surface, but are computationally demanding. We propose a Bayesian machine learning method that serves as an efficient surrogate model, or emulator, for these three-dimensional DFN simulations. Our model trains on a small quantity of simulation data and, using a graph/path-based decomposition of the fracture network, rapidly predicts quantiles of the breakthrough time distribution. The approach, based on Gaussian Process Regression (GPR), outputs predictions that are within 20-30% of high-fidelity DFN simulation results. Unlike previously proposed methods, it also provides uncertainty quantification, outputting confidence intervals that are essential given the uncertainty inherent in subsurface modeling. Our trained model runs within a fraction of a second, which is considerably faster than other methods with comparable accuracy and multiple orders of magnitude faster than high-fidelity simulations.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Characterizing the impacts of multi-scale heterogeneity on solute transport in fracture networks
Authors:
Matthew R. Sweeney,
Jeffrey D. Hyman,
Daniel O'Malley,
Javier E. Santos,
J. William Carey,
Philip H. Stauffer,
Hari S. Viswanathan
Abstract:
We model flow and transport in three-dimensional fracture networks with varying degrees of fracture-to-fracture aperture/permeability heterogeneity and network density to show how changes in these properties can cause the emergence of anomalous flow and transport behavior. If fracture-to-fracture aperture heterogeneity is increased in sparse networks, velocity fluctuations can inhibit high flow ra…
▽ More
We model flow and transport in three-dimensional fracture networks with varying degrees of fracture-to-fracture aperture/permeability heterogeneity and network density to show how changes in these properties can cause the emergence of anomalous flow and transport behavior. If fracture-to-fracture aperture heterogeneity is increased in sparse networks, velocity fluctuations can inhibit high flow rates and solute transport can be delayed, even in cases where hydraulic aperture is monotonically increased. As the density of the networks is increased, more connected pathways allow for particles to bypass these effects. We discover transition behavior where with relatively few connected pathways in a network from inflow to outflow boundaries, the first arrival times of particles are not heavily affected by fracture-to-fracture aperture heterogeneity, but the scaling behavior of the tails is strongly influenced due to the particles being forced to sample some of the heterogeneity in the velocity field caused by aperture differences. These results reinforce the importance of considering multi-scale effects in fractured systems and can inform flow and transport processes in both natural and engineered fracture systems, especially the latter where high aperture fractures are often stimulated and connect to existing fracture networks with smaller apertures.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Impact of artificial topological changes on flow and transport through fractured media due to mesh resolution
Authors:
Aleksandra A. Pachalieva,
Matthew R. Sweeney,
Hari Viswanathan,
Emily Stein,
Rosie Leone,
Jeffrey D. Hyman
Abstract:
We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters…
▽ More
We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters were loosely based on field site characterizations. We also considered five network densities, which were defined using a dimensionless version of density based on percolation theory. Once the networks were generated, we upscaled them into a single continuum model using the upscaled discrete fracture matrix model presented by Sweeney et al. We considered steady, isothermal pressure-driven flow through each domain and then simulated conservative, decaying, and adsorbing tracers using a pulse injection into the domain. For each simulation, we calculated the effective permeability and solute breakthrough curves as quantities of interest to compare between network realizations. We found that selecting a mesh resolution such that the global topology of the upscaled mesh matches the fracture network is essential. If the upscaled mesh has a connected pathway of fracture (higher permeability) cells but the fracture network does not, then the estimates for effective permeability and solute breakthrough will be incorrect. False connections cannot be eliminated entirely, but they can be managed by choosing appropriate mesh resolution and refinement for a given network. Adopting octree meshing to obtain sufficient levels of refinement leads to fewer computational cells (up to a 90% reduction in overall cell count) when compared to using a uniform resolution grid and can result in a more accurate continuum representation of the true fracture network.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
The FluidFlower International Benchmark Study: Process, Modeling Results, and Comparison to Experimental Data
Authors:
Bernd Flemisch,
Jan M. Nordbotten,
Martin Fernø,
Ruben Juanes,
Holger Class,
Mojdeh Delshad,
Florian Doster,
Jonathan Ennis-King,
Jacques Franc,
Sebastian Geiger,
Dennis Gläser,
Christopher Green,
James Gunning,
Hadi Hajibeygi,
Samuel J. Jackson,
Mohamad Jammoul,
Satish Karra,
Jiawei Li,
Stephan K. Matthäi,
Terry Miller,
Qi Shao,
Catherine Spurin,
Philip Stauffer,
Hamdi Tchelepi,
Xiaoming Tian
, et al. (8 additional authors not shown)
Abstract:
Successful deployment of geological carbon storage (GCS) requires an extensive use of reservoir simulators for screening, ranking and optimization of storage sites. However, the time scales of GCS are such that no sufficient long-term data is available yet to validate the simulators against. As a consequence, there is currently no solid basis for assessing the quality with which the dynamics of la…
▽ More
Successful deployment of geological carbon storage (GCS) requires an extensive use of reservoir simulators for screening, ranking and optimization of storage sites. However, the time scales of GCS are such that no sufficient long-term data is available yet to validate the simulators against. As a consequence, there is currently no solid basis for assessing the quality with which the dynamics of large-scale GCS operations can be forecasted.
To meet this knowledge gap, we have conducted a major GCS validation benchmark study. To achieve reasonable time scales, a laboratory-size geological storage formation was constructed (the "FluidFlower"), forming the basis for both the experimental and computational work. A validation experiment consisting of repeated GCS operations was conducted in the FluidFlower, providing what we define as the true physical dynamics for this system. Nine different research groups from around the world provided forecasts, both individually and collaboratively, based on a detailed physical and petrophysical characterization of the FluidFlower sands.
The major contribution of this paper is a report and discussion of the results of the validation benchmark study, complemented by a description of the benchmarking process and the participating computational models. The forecasts from the participating groups are compared to each other and to the experimental data by means of various indicative qualitative and quantitative measures. By this, we provide a detailed assessment of the capabilities of reservoir simulators and their users to capture both the injection and post-injection dynamics of the GCS operations.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Quantum Algorithms for Geologic Fracture Networks
Authors:
Jessie M. Henderson,
Marianna Podzorova,
M. Cerezo,
John K. Golden,
Leonard Gleyzer,
Hari S. Viswanathan,
Daniel O'Malley
Abstract:
Solving large systems of equations is a challenge for modeling natural phenomena, such as simulating subsurface flow. To avoid systems that are intractable on current computers, it is often necessary to neglect information at small scales, an approach known as coarse-graining. For many practical applications, such as flow in porous, homogenous materials, coarse-graining offers a sufficiently-accur…
▽ More
Solving large systems of equations is a challenge for modeling natural phenomena, such as simulating subsurface flow. To avoid systems that are intractable on current computers, it is often necessary to neglect information at small scales, an approach known as coarse-graining. For many practical applications, such as flow in porous, homogenous materials, coarse-graining offers a sufficiently-accurate approximation of the solution. Unfortunately, fractured systems cannot be accurately coarse-grained, as critical network topology exists at the smallest scales, including topology that can push the network across a percolation threshold. Therefore, new techniques are necessary to accurately model important fracture systems. Quantum algorithms for solving linear systems offer a theoretically-exponential improvement over their classical counterparts, and in this work we introduce two quantum algorithms for fractured flow. The first algorithm, designed for future quantum computers which operate without error, has enormous potential, but we demonstrate that current hardware is too noisy for adequate performance. The second algorithm, designed to be noise resilient, already performs well for problems of small to medium size (order 10 to 1000 nodes), which we demonstrate experimentally and explain theoretically. We expect further improvements by leveraging quantum error mitigation and preconditioning.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Physics-informed machine learning with differentiable programming for heterogeneous underground reservoir pressure management
Authors:
Aleksandra Pachalieva,
Daniel O'Malley,
Dylan Robert Harp,
Hari Viswanathan
Abstract:
Avoiding over-pressurization in subsurface reservoirs is critical for applications like CO2 sequestration and wastewater injection. Managing the pressures by controlling injection/extraction are challenging because of complex heterogeneity in the subsurface. The heterogeneity typically requires high-fidelity physics-based models to make predictions on CO$_2$ fate. Furthermore, characterizing the h…
▽ More
Avoiding over-pressurization in subsurface reservoirs is critical for applications like CO2 sequestration and wastewater injection. Managing the pressures by controlling injection/extraction are challenging because of complex heterogeneity in the subsurface. The heterogeneity typically requires high-fidelity physics-based models to make predictions on CO$_2$ fate. Furthermore, characterizing the heterogeneity accurately is fraught with parametric uncertainty. Accounting for both, heterogeneity and uncertainty, makes this a computationally-intensive problem challenging for current reservoir simulators. To tackle this, we use differentiable programming with a full-physics model and machine learning to determine the fluid extraction rates that prevent over-pressurization at critical reservoir locations. We use DPFEHM framework, which has trustworthy physics based on the standard two-point flux finite volume discretization and is also automatically differentiable like machine learning models. Our physics-informed machine learning framework uses convolutional neural networks to learn an appropriate extraction rate based on the permeability field. We also perform a hyperparameter search to improve the model's accuracy. Training and testing scenarios are executed to evaluate the feasibility of using physics-informed machine learning to manage reservoir pressures. We constructed and tested a sufficiently accurate simulator that is 400000 times faster than the underlying physics-based simulator, allowing for near real-time analysis and robust uncertainty quantification.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Quantum Computing and Preconditioners for Hydrological Linear Systems
Authors:
John Golden,
Daniel O'Malley,
Hari Viswanathan
Abstract:
Modeling hydrological fracture networks is a hallmark challenge in computational earth sciences. Accurately predicting critical features of fracture systems, e.g. percolation, can require solving large linear systems far beyond current or future high performance capabilities. Quantum computers can theoretically bypass the memory and speed constraints faced by classical approaches, however several…
▽ More
Modeling hydrological fracture networks is a hallmark challenge in computational earth sciences. Accurately predicting critical features of fracture systems, e.g. percolation, can require solving large linear systems far beyond current or future high performance capabilities. Quantum computers can theoretically bypass the memory and speed constraints faced by classical approaches, however several technical issues must first be addressed. Chief amongst these difficulties is that such systems are often ill-conditioned, i.e. small changes in the system can produce large changes in the solution, which can slow down the performance of linear solving algorithms. We test several existing quantum techniques to improve the condition number, but find they are insufficient. We then introduce the inverse Laplacian preconditioner, which improves the scaling of the condition number of the system from $O(N)$ to $O(\sqrt{N})$ and admits a quantum implementation. These results are a critical first step in develo** a quantum solver for fracture systems, both advancing the state of hydrological modeling and providing a novel real-world application for quantum linear systems algorithms.
△ Less
Submitted 24 January, 2023; v1 submitted 12 May, 2022;
originally announced May 2022.
-
The Effect of Junction Gutters for the Upscaling of Droplet Generation in a Microfluidic T-Junction
Authors:
H. Viswanathan
Abstract:
The influence of drop formation due to micro rib-like structures, viz., the Junction Gutters (JGs) within a standard microfluidic T-junction, is numerically investigated. Hydrodynamic conditions that lead to various flow regimes are identified characterized by the Capillary number (Ca) and velocity ratios of the dispersed and continuous phases (q) within a standard T-junction. Subsequently, under…
▽ More
The influence of drop formation due to micro rib-like structures, viz., the Junction Gutters (JGs) within a standard microfluidic T-junction, is numerically investigated. Hydrodynamic conditions that lead to various flow regimes are identified characterized by the Capillary number (Ca) and velocity ratios of the dispersed and continuous phases (q) within a standard T-junction. Subsequently, under such conditions, a range of gutter configurations is introduced in the standard channel. The results predict that the introduction of JGs can favourably alter the formation frequency and morphology of drops and, consequently, promote upscaling significantly for the hydrodynamic conditions associated with low Ca. Detailed flow maps are presented that reveal a plethora of transitions during the formation of droplets with higher Ca and q that would otherwise signify a drip** or a jetting regime in a standard junction. However, specific gutter configurations are identified where JGs are unfavourable for generating monodisperse droplets.
△ Less
Submitted 4 May, 2022;
originally announced May 2022.
-
Computationally Efficient Multiscale Neural Networks Applied To Fluid Flow In Complex 3D Porous Media
Authors:
Javier Santos,
Ying Yin,
Honggeun Jo,
Wen Pan,
Qinjun Kang,
Hari Viswanathan,
Masa Prodanovic,
Michael Pyrcz,
Nicholas Lubbers
Abstract:
The permeability of complex porous materials can be obtained via direct flow simulation, which provides the most accurate results, but is very computationally expensive. In particular, the simulation convergence time scales poorly as simulation domains become tighter or more heterogeneous. Semi-analytical models that rely on averaged structural properties (i.e. porosity and tortuosity) have been p…
▽ More
The permeability of complex porous materials can be obtained via direct flow simulation, which provides the most accurate results, but is very computationally expensive. In particular, the simulation convergence time scales poorly as simulation domains become tighter or more heterogeneous. Semi-analytical models that rely on averaged structural properties (i.e. porosity and tortuosity) have been proposed, but these features only summarize the domain, resulting in limited applicability. On the other hand, data-driven machine learning approaches have shown great promise for building more general models by virtue of accounting for the spatial arrangement of the domains solid boundaries. However, prior approaches building on the Convolutional Neural Network (ConvNet) literature concerning 2D image recognition problems do not scale well to the large 3D domains required to obtain a Representative Elementary Volume (REV). As such, most prior work focused on homogeneous samples, where a small REV entails that that the global nature of fluid flow could be mostly neglected, and accordingly, the memory bottleneck of addressing 3D domains with ConvNets was side-stepped. Therefore, important geometries such as fractures and vuggy domains could not be well-modeled. In this work, we address this limitation with a general multiscale deep learning model that is able to learn from porous media simulation data. By using a coupled set of neural networks that view the domain on different scales, we enable the evaluation of large images in approximately one second on a single Graphics Processing Unit. This model architecture opens up the possibility of modeling domain sizes that would not be feasible using traditional direct simulation tools on a desktop computer.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Computational Aeroacoustics of a Generic Side View Mirror using Stress Blended Eddy Simulation
Authors:
K. K Chode,
H. Viswanathan,
K. Chow
Abstract:
This paper presents a numerical investigation of aerodynamic noise generated by a generic side-view mirror mounted on a flat plate using the Stress Blended Eddy Simulation (SBES) coupled with the Ffowcs Williams and Hawkings (FW-H) equation. A grid evaluation study was performed using a standardised side-view mirror with a Reynolds Number (Re) of 5.2 x10^5 based on the diameter of the model. The p…
▽ More
This paper presents a numerical investigation of aerodynamic noise generated by a generic side-view mirror mounted on a flat plate using the Stress Blended Eddy Simulation (SBES) coupled with the Ffowcs Williams and Hawkings (FW-H) equation. A grid evaluation study was performed using a standardised side-view mirror with a Reynolds Number (Re) of 5.2 x10^5 based on the diameter of the model. The predictions for hydrodynamic pressure fluctuations on the mirror, the window and the sound emitted at various microphone locations are in good agreement with previously published experimental data. In addition, our numerical results indicate that yawing the mirror closer to the side window results in the flow being attached to the rear of the mirror resulting in an overall reduction in Sound Pressure Level (SPL) at several receiver locations.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Great SCO2T! Rapid tool for carbon sequestration science, engineering, and economics
Authors:
Richard S. Middleton,
Jeffrey M. Bielicki,
Bailian Chen,
Andres F. Clarens,
Robert P. Currier,
Kevin M. Ellett,
Dylan R. Harp,
Brendan A. Hoover,
Ryan M. Kammer,
Dane N. McFarlane,
Jonathan D. Ogland-Hand,
Rajesh J. Pawar,
Philip H. Stauffer,
Hari S. Viswanathan,
Sean P. Yaw
Abstract:
CO2 capture and storage (CCS) technology is likely to be widely deployed in coming decades in response to major climate and economics drivers: CCS is part of every clean energy pathway that limits global warming to 2C or less and receives significant CO2 tax credits in the United States. These drivers are likely to stimulate capture, transport, and storage of hundreds of millions or billions of to…
▽ More
CO2 capture and storage (CCS) technology is likely to be widely deployed in coming decades in response to major climate and economics drivers: CCS is part of every clean energy pathway that limits global warming to 2C or less and receives significant CO2 tax credits in the United States. These drivers are likely to stimulate capture, transport, and storage of hundreds of millions or billions of tonnes of CO2 annually. A key part of the CCS puzzle will be identifying and characterizing suitable storage sites for vast amounts of CO2. We introduce a new software tool called SCO2T (Sequestration of CO2 Tool, pronounced "Scott") to rapidly characterizing saline storage reservoirs. The tool is designed to rapidly screen hundreds of thousands of reservoirs, perform sensitivity and uncertainty analyses, and link sequestration engineering (injection rates, reservoir capacities, plume dimensions) to sequestration economics (costs constructed from around 70 separate economic inputs). We describe the novel science developments supporting SCO2T including a new approach to estimating CO2 injection rates and CO2 plume dimensions as well as key advances linking sequestration engineering with economics. Next, we perform a sensitivity and uncertainty analysis of geology combinations (including formation depth, thickness, permeability, porosity, and temperature) to understand the impact on carbon sequestration. Through the sensitivity analysis we show that increasing depth and permeability both can lead to increased CO2 injection rates, increased storage potential, and reduced costs, while increasing porosity reduces costs without impacting the injection rate (CO2 is injected at a constant pressure in all cases) by increasing the reservoir capacity.
△ Less
Submitted 27 May, 2020;
originally announced May 2020.
-
Modeling nanoconfinement effects using active learning
Authors:
Javier E. Santos,
Mohammed Mehana,
Hao Wu,
Masa Prodanovic,
Michael J. Pyrcz,
Qinjun Kang,
Nicholas Lubbers,
Hari Viswanathan
Abstract:
Predicting the spatial configuration of gas molecules in nanopores of shale formations is crucial for fluid flow forecasting and hydrocarbon reserves estimation. The key challenge in these tight formations is that the majority of the pore sizes are less than 50 nm. At this scale, the fluid properties are affected by nanoconfinement effects due to the increased fluid-solid interactions. For instanc…
▽ More
Predicting the spatial configuration of gas molecules in nanopores of shale formations is crucial for fluid flow forecasting and hydrocarbon reserves estimation. The key challenge in these tight formations is that the majority of the pore sizes are less than 50 nm. At this scale, the fluid properties are affected by nanoconfinement effects due to the increased fluid-solid interactions. For instance, gas adsorption to the pore walls could account for up to 85% of the total hydrocarbon volume in a tight reservoir. Although there are analytical solutions that describe this phenomenon for simple geometries, they are not suitable for describing realistic pores, where surface roughness and geometric anisotropy play important roles. To describe these, molecular dynamics (MD) simulations are used since they consider fluid-solid and fluid-fluid interactions at the molecular level. However, MD simulations are computationally expensive, and are not able to simulate scales larger than a few connected nanopores. We present a method for building and training physics-based deep learning surrogate models to carry out fast and accurate predictions of molecular configurations of gas inside nanopores. Since training deep learning models requires extensive databases that are computationally expensive to create, we employ active learning (AL). AL reduces the overhead of creating comprehensive sets of high-fidelity data by determining where the model uncertainty is greatest, and running simulations on the fly to minimize it. The proposed workflow enables nanoconfinement effects to be rigorously considered at the mesoscale where complex connected sets of nanopores control key applications such as hydrocarbon recovery and CO2 sequestration.
△ Less
Submitted 6 May, 2020; v1 submitted 6 May, 2020;
originally announced May 2020.
-
PFLOTRAN-SIP: A PFLOTRAN Module for Simulating Spectral-Induced Polarization of Electrical Impedance Data
Authors:
B. Ahmmed,
M. K. Mudunuru,
S. Karra,
S. C. James,
H. S. Viswanathan,
J. A. Dunbar
Abstract:
Spectral induced polarization (SIP) is a non-intrusive geophysical method that is widely used to detect sulfide minerals, clay minerals, metallic objects, municipal wastes, hydrocarbons, and salinity intrusion. However, SIP is a static method that cannot measure the dynamics of flow and solute/species transport in the subsurface. To capture these dynamics, the data collected with the SIP technique…
▽ More
Spectral induced polarization (SIP) is a non-intrusive geophysical method that is widely used to detect sulfide minerals, clay minerals, metallic objects, municipal wastes, hydrocarbons, and salinity intrusion. However, SIP is a static method that cannot measure the dynamics of flow and solute/species transport in the subsurface. To capture these dynamics, the data collected with the SIP technique needs to be coupled with fluid flow and reactive-transport models. To our knowledge, currently, there is no simulator in the open-source literature that couples fluid flow, solute transport, and SIP process models to analyze geoelectrical signatures in a large-scale system. A massively parallel simulation framework (PFLOTRAN-SIP) was built to couple SIP data to fluid flow and solute transport processes. This framework built on the PFLOTRAN-E4D simulator that couples PFLOTRAN and E4D, without sacrificing computational performance. PFLOTRAN solves the coupled flow and solute transport process models to estimate solute concentrations, which were used in Archie's model to compute bulk electrical conductivities at near-zero frequency. These bulk electrical conductivities were modified using the Cole-Cole model to account for frequency dependence. Using the estimated frequency-dependent bulk conductivities, E4D simulated the real and complex electrical potential signals for selected frequencies for SIP. The PFLOTRAN-SIP framework was demonstrated through a synthetic tracer-transport model simulating tracer concentration and electrical impedances for four frequencies. Later, SIP inversion estimated bulk electrical conductivities by matching electrical impedances for each specified frequency. The estimated bulk electrical conductivities were consistent with the simulated tracer concentrations from the PFLOTRAN-SIP forward model.
△ Less
Submitted 14 July, 2020; v1 submitted 4 September, 2019;
originally announced September 2019.
-
Branching of Hydraulic Cracks in Gas or Oil Shale with Closed Natural Fractures: How to Master Permeability
Authors:
Saeed Rahimi-Agham,
Viet-Tuan Chau,
Huyn** Lee,
Hoang Nguyen,
Weixin Li,
Satish Karra,
Esteban Rougier,
Hari Viswanathan,
Gowri Srinivasan,
Zdenek P. Bazant
Abstract:
While the hydraulic fracturing technology, aka fracking (or fraccing, frac), has become highly developed and astonishingly successful, a consistent formulation of the associated fracture mechanics that would not conflict with some observations is still unavailable. It is attempted here. Classical fracture mechanics, as well as the current commercial softwares, predict vertical cracks to propagate…
▽ More
While the hydraulic fracturing technology, aka fracking (or fraccing, frac), has become highly developed and astonishingly successful, a consistent formulation of the associated fracture mechanics that would not conflict with some observations is still unavailable. It is attempted here. Classical fracture mechanics, as well as the current commercial softwares, predict vertical cracks to propagate without branching from the perforations of the horizontal well casing, which are typically spaced at 10 m or more. However, to explain the gas production rate at the wellhead, the crack spacing would have to be only about 0.1 m, which would increase the overall gas permeability of shale mass about 10,000$\times$. This permeability increase has generally been attributed to a preexisting system of orthogonal natural cracks, whose spacing is about 0.1 m. But their average age is about 100 million years, and a recent analysis indicated that these cracks must have been completely closed by secondary creep of shale in less than a million years. Here it is considered that the tectonic events that produced the natural cracks in shale must have also created weak layers with nano- or micro-cracking damage. It is numerically demonstrated that a greatly enhanced permeability along the weak layers, with a greatly increased transverse Biot coefficient, must cause the fracking to engender lateral branching and the opening of hydraulic cracks along the weak layers, even if these cracks are initially almost closed. A finite element crack band model, based on recently developed anisotropic spherocylindrical microplane constitutive law, demonstrates these findings.
△ Less
Submitted 5 December, 2018;
originally announced December 2018.
-
Learning to fail: Predicting fracture evolution in brittle material models using recurrent graph convolutional neural networks
Authors:
Max Schwarzer,
Bryce Rogan,
Yadong Ruan,
Zhengming Song,
Diana Y. Lee,
Allon G. Percus,
Viet T. Chau,
Bryan A. Moore,
Esteban Rougier,
Hari S. Viswanathan,
Gowri Srinivasan
Abstract:
We propose a machine learning approach to address a key challenge in materials science: predicting how fractures propagate in brittle materials under stress, and how these materials ultimately fail. Our methods use deep learning and train on simulation data from high-fidelity models, emulating the results of these models while avoiding the overwhelming computational demands associated with running…
▽ More
We propose a machine learning approach to address a key challenge in materials science: predicting how fractures propagate in brittle materials under stress, and how these materials ultimately fail. Our methods use deep learning and train on simulation data from high-fidelity models, emulating the results of these models while avoiding the overwhelming computational demands associated with running a statistically significant sample of simulations. We employ a graph convolutional network that recognizes features of the fracturing material and a recurrent neural network that models the evolution of these features, along with a novel form of data augmentation that compensates for the modest size of our training data. We simultaneously generate predictions for qualitatively distinct material properties. Results on fracture damage and length are within 3% of their simulated values, and results on time to material failure, which is notoriously difficult to predict even with high-fidelity models, are within approximately 15% of simulated values. Once trained, our neural networks generate predictions within seconds, rather than the hours needed to run a single simulation.
△ Less
Submitted 15 March, 2019; v1 submitted 14 October, 2018;
originally announced October 2018.
-
Estimating Failure in Brittle Materials using Graph Theory
Authors:
M. K. Mudunuru,
N. Panda,
S. Karra,
G. Srinivasan,
V. T. Chau,
E. Rougier,
A. Hunter,
H. S. Viswanathan
Abstract:
In brittle fracture applications, failure paths, regions where the failure occurs and damage statistics, are some of the key quantities of interest (QoI). High-fidelity models for brittle failure that accurately predict these QoI exist but are highly computationally intensive, making them infeasible to incorporate in upscaling and uncertainty quantification frameworks. The goal of this paper is to…
▽ More
In brittle fracture applications, failure paths, regions where the failure occurs and damage statistics, are some of the key quantities of interest (QoI). High-fidelity models for brittle failure that accurately predict these QoI exist but are highly computationally intensive, making them infeasible to incorporate in upscaling and uncertainty quantification frameworks. The goal of this paper is to provide a fast heuristic to reasonably estimate quantities such as failure path and damage in the process of brittle failure. Towards this goal, we first present a method to predict failure paths under tensile loading conditions and low-strain rates. The method uses a $k$-nearest neighbors algorithm built on fracture process zone theory, and identifies the set of all possible pre-existing cracks that are likely to join early to form a large crack. The method then identifies zone of failure and failure paths using weighted graphs algorithms. We compare these failure paths to those computed with a high-fidelity model called the Hybrid Optimization Software Simulation Suite (HOSS). A probabilistic evolution model for average damage in a system is also developed that is trained using 150 HOSS simulations and tested on 40 simulations. A non-parametric approach based on confidence intervals is used to determine the damage evolution over time along the dominant failure path. For upscaling, damage is the key QoI needed as an input by the continuum models. This needs to be informed accurately by the surrogate models for calculating effective modulii at continuum-scale. We show that for the proposed average damage evolution model, the prediction accuracy on the test data is more than 90\%. In terms of the computational time, the proposed models are $\approx \mathcal{O}(10^6)$ times faster compared to high-fidelity HOSS.
△ Less
Submitted 30 July, 2018;
originally announced July 2018.
-
Reduced-Order Modeling through Machine Learning Approaches for Brittle Fracture Applications
Authors:
A. Hunter,
B. A. Moore,
M. K. Mudunuru,
V. T. Chau,
R. L. Miller,
R. B. Tchoua,
C. Nyshadham,
S. Karra,
D. O. Malley,
E. Rougier,
H. S. Viswanathan,
G. Srinivasan
Abstract:
In this paper, five different approaches for reduced-order modeling of brittle fracture in geomaterials, specifically concrete, are presented and compared. Four of the five methods rely on machine learning (ML) algorithms to approximate important aspects of the brittle fracture problem. In addition to the ML algorithms, each method incorporates different physics-based assumptions in order to reduc…
▽ More
In this paper, five different approaches for reduced-order modeling of brittle fracture in geomaterials, specifically concrete, are presented and compared. Four of the five methods rely on machine learning (ML) algorithms to approximate important aspects of the brittle fracture problem. In addition to the ML algorithms, each method incorporates different physics-based assumptions in order to reduce the computational complexity while maintaining the physics as much as possible. This work specifically focuses on using the ML approaches to model a 2D concrete sample under low strain rate pure tensile loading conditions with 20 preexisting cracks present. A high-fidelity finite element-discrete element model is used to both produce a training dataset of 150 simulations and an additional 35 simulations for validation. Results from the ML approaches are directly compared against the results from the high-fidelity model. Strengths and weaknesses of each approach are discussed and the most important conclusion is that a combination of physics-informed and data-driven features are necessary for emulating the physics of crack propagation, interaction and coalescence. All of the models presented here have runtimes that are orders of magnitude faster than the original high-fidelity model and pave the path for develo** accurate reduced order models that could be used to inform larger length-scale models with important sub-scale physics that often cannot be accounted for due to computational cost.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Simulation of fracture coalescence in granite via the combined finite-discrete element method
Authors:
Bryan Euser,
Esteban Rougier,
Zhou Lei,
Earl E. Knight,
Luke P. Frash,
James W. Carey,
Hari Viswanathan,
Antonio Munjiza
Abstract:
Fracture coalescence is a critical phenomenon for creating large fractures from smaller flaws, affecting fracture network flow and seismic energy release potential. In this paper, simulations of fracture coalescence processes in granite specimens with pre-existing cracks are performed. These simulations utilize an in-house implementation of the Combined Finite-Discrete Element method (FDEM) known…
▽ More
Fracture coalescence is a critical phenomenon for creating large fractures from smaller flaws, affecting fracture network flow and seismic energy release potential. In this paper, simulations of fracture coalescence processes in granite specimens with pre-existing cracks are performed. These simulations utilize an in-house implementation of the Combined Finite-Discrete Element method (FDEM) known as the Hybrid Optimization Software Suite (HOSS). The pre-existing cracks within the specimens follow two geometric patterns: 1) a single crack oriented at different angles with respect to the loading direction, and 2) two cracks, where one crack is oriented perpendicular to the loading direction and the other crack is oriented at different angles. The intent of this study is to demonstrate the suitability of FDEM for modeling fracture coalescence processes including: crack initiation and propagation, tensile and shear fracture behavior, and patterns of fracture coalescence. The simulations provide insight into the evolution of fracture tensile and shear fracture behavior as a function of time. The single-crack simulations accurately reproduce experimentally measured peak stresses as a function of crack inclination angle. Both the single- and double-crack simulations exhibit a linear increase in strength with increasing crack angle; the double-crack specimens are systematically weaker than the single-crack specimens.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
A generalized anisotropic deformation formulation for geomaterials
Authors:
Zhou Lei,
Esteban Rougier,
Earl E. Knight,
Antonio Munjiza,
Hari Viswanathan
Abstract:
In this paper, the Combined Finite-Discrete Element Method (FDEM) has been applied to analyze the deformation of anisotropic geomaterials. In the most general case geomaterials are both non-homogeneous and non-isotropic. With the aim of addressing anisotropic material problems, improved 2D FDEM formulations have been developed. These formulations feature the unified hypo-hyper elastic approach com…
▽ More
In this paper, the Combined Finite-Discrete Element Method (FDEM) has been applied to analyze the deformation of anisotropic geomaterials. In the most general case geomaterials are both non-homogeneous and non-isotropic. With the aim of addressing anisotropic material problems, improved 2D FDEM formulations have been developed. These formulations feature the unified hypo-hyper elastic approach combined with a multiplicative decomposition-based selective integration for volumetric and shear deformation modes. This approach is significantly different from the co-rotational formulations typically encountered in finite element codes. Unlike the co-rotational formulation, the multiplicative decomposition-based formulation naturally decomposes deformation into translation, rotation, plastic stretches, elastic stretches, volumetric stretches, shear stretches, etc. This approach can be implemented for a whole family of finite elements from solids to shells and membranes. This novel 2D FDEM based material formulation was designed in such a way that the anisotropic properties of the solid can be specified in a cell by cell basis, therefore enabling the user to seed these anisotropic properties following any type of spatial variation, for example, following a curvilinear path. In addition, due to the selective integration, there are no problems with volumetric or shear locking with any type of finite element employed.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
Modeling flow and transport in fracture networks using graphs
Authors:
S. Karra,
D. O'Malley,
J. D. Hyman,
H. S. Viswanathan,
G. Srinivasan
Abstract:
Fractures form the main pathways for flow in the subsurface within low-permeability rock. For this reason, accurately predicting flow and transport in fractured systems is vital for improving the performance of subsurface applications. Fracture sizes in these systems can range from millimeters to kilometers. Although, modeling flow and transport using the discrete fracture network (DFN) approach i…
▽ More
Fractures form the main pathways for flow in the subsurface within low-permeability rock. For this reason, accurately predicting flow and transport in fractured systems is vital for improving the performance of subsurface applications. Fracture sizes in these systems can range from millimeters to kilometers. Although, modeling flow and transport using the discrete fracture network (DFN) approach is known to be more accurate due to incorporation of the detailed fracture network structure over continuum-based methods, capturing the flow and transport in such a wide range of scales is still computationally intractable. Furthermore, if one has to quantify uncertainty, hundreds of realizations of these DFN models have to be run. To reduce the computational burden, we solve flow and transport on a graph representation of a DFN. We study the accuracy of the graph approach by comparing breakthrough times and tracer particle statistical data between the graph-based and the high-fidelity DFN approaches, for fracture networks with varying number of fractures and degree of heterogeneity. We show that the graph approach shows a consistent bias with up to an order of magnitude slower breakthrough when compared to the DFN approach. We show that this is due to graph algorithm's under-prediction of the pressure gradients across intersections on a given fracture, leading to slower tracer particle speeds between intersections and longer travel times. We present a bias correction methodology to the graph algorithm that reduces the discrepancy between the DFN and graph predictions. We show that with this bias correction, the graph algorithm predictions significantly improve and the results are very accurate. The good accuracy and the low computational cost, with $O(10^4)$ times lower times than the DFN, makes the graph algorithm, an ideal technique to incorporate in uncertainty quantification methods.
△ Less
Submitted 20 February, 2018; v1 submitted 28 August, 2017;
originally announced August 2017.
-
Machine learning for graph-based representations of three-dimensional discrete fracture networks
Authors:
Manuel Valera,
Zhengyang Guo,
Priscilla Kelly,
Sean Matz,
Vito Adrian Cantu,
Allon G. Percus,
Jeffrey D. Hyman,
Gowri Srinivasan,
Hari S. Viswanathan
Abstract:
Structural and topological information play a key role in modeling flow and transport through fractured rock in the subsurface. Discrete fracture network (DFN) computational suites such as dfnWorks are designed to simulate flow and transport in such porous media. Flow and transport calculations reveal that a small backbone of fractures exists, where most flow and transport occurs. Restricting the…
▽ More
Structural and topological information play a key role in modeling flow and transport through fractured rock in the subsurface. Discrete fracture network (DFN) computational suites such as dfnWorks are designed to simulate flow and transport in such porous media. Flow and transport calculations reveal that a small backbone of fractures exists, where most flow and transport occurs. Restricting the flowing fracture network to this backbone provides a significant reduction in the network's effective size. However, the particle tracking simulations needed to determine the reduction are computationally intensive. Such methods may be impractical for large systems or for robust uncertainty quantification of fracture networks, where thousands of forward simulations are needed to bound system behavior.
In this paper, we develop an alternative network reduction approach to characterizing transport in DFNs, by combining graph theoretical and machine learning methods. We consider a graph representation where nodes signify fractures and edges denote their intersections. Using random forest and support vector machines, we rapidly identify a subnetwork that captures the flow patterns of the full DFN, based primarily on node centrality features in the graph. Our supervised learning techniques train on particle-tracking backbone paths found by dfnWorks, but run in negligible time compared to those simulations. We find that our predictions can reduce the network to approximately 20% of its original size, while still generating breakthrough curves consistent with those of the original network.
△ Less
Submitted 29 January, 2018; v1 submitted 27 May, 2017;
originally announced May 2017.
-
Regression-based reduced-order models to predict transient thermal output for enhanced geothermal systems
Authors:
M. K. Mudunuru,
S. Karra,
D. R. Harp,
G. D. Guthrie,
H. S. Viswanathan
Abstract:
The goal of this paper is to assess the utility of Reduced-Order Models (ROMs) developed from 3D physics-based models for predicting transient thermal power output for an enhanced geothermal reservoir while explicitly accounting for uncertainties in the subsurface system and site-specific details. Numerical simulations are performed based on Latin Hypercube Sampling (LHS) of model inputs drawn fro…
▽ More
The goal of this paper is to assess the utility of Reduced-Order Models (ROMs) developed from 3D physics-based models for predicting transient thermal power output for an enhanced geothermal reservoir while explicitly accounting for uncertainties in the subsurface system and site-specific details. Numerical simulations are performed based on Latin Hypercube Sampling (LHS) of model inputs drawn from uniform probability distributions. Key sensitive parameters are identified from these simulations, which are fracture zone permeability, well/skin factor, bottom hole pressure, and injection flow rate. The inputs for ROMs are based on these key sensitive parameters. The ROMs are then used to evaluate the influence of subsurface attributes on thermal power production curves. The resulting ROMs are compared with field-data and the detailed physics-based numerical simulations. We propose three different ROMs with different levels of model parsimony, each describing key and essential features of the power production curves. ROM-1 is able to accurately reproduce the power output of numerical simulations for low values of permeabilities and certain features of the field-scale data, and is relatively parsimonious. ROM-2 is a more complex model than ROM-1 but it accurately describes the field-data. At higher permeabilities, ROM-2 reproduces numerical results better than ROM-1, however, there is a considerable deviation at low fracture zone permeabilities. ROM-3 is developed by taking the best aspects of ROM-1 and ROM-2 and provides a middle ground for model parsimony. It is able to describe various features of numerical simulations and field-data. From the proposed workflow, we demonstrate that the proposed simple ROMs are able to capture various complex features of the power production curves of Fenton Hill HDR system. For typical EGS applications, ROM-2 and ROM-3 outperform ROM-1.
△ Less
Submitted 12 July, 2017; v1 submitted 14 June, 2016;
originally announced June 2016.
-
A generalized lattice Boltzmann model for flow through tight porous media with Klinkenberg's effect
Authors:
Li Chen,
Wenzhen Fang,
Qinjun Kang,
Jeffrey De'Haven Hyman,
Hari S Viswanathan,
Wen-Quan Tao
Abstract:
Gas slippage occurs when the mean free path of the gas molecules is in the order of the characteristic pore size of a porous medium. This phenomenon leads to the Klinkenberg's effect where the measured permeability of a gas (apparent permeability) is higher than that of the liquid (intrinsic permeability). A generalized lattice Boltzmann model is proposed for flow through porous media that include…
▽ More
Gas slippage occurs when the mean free path of the gas molecules is in the order of the characteristic pore size of a porous medium. This phenomenon leads to the Klinkenberg's effect where the measured permeability of a gas (apparent permeability) is higher than that of the liquid (intrinsic permeability). A generalized lattice Boltzmann model is proposed for flow through porous media that includes Klinkenberg's effect, which is based on the model of Guo et al. (Z.L. Guo et al., Phys.Rev.E 65, 046308 (2002)). The second-order Beskok and Karniadakis-Civan's correlation (A. Beskok and G. Karniadakis, Microscale Thermophysical Engineering 3, 43-47 (1999), F. Civan, Transp Porous Med 82, 375-384 (2010)) is adopted to calculate the apparent permeability based on intrinsic permeability and Knudsen number. Fluid flow between two parallel plates filled with porous media is simulated to validate model. Simulations performed in a heterogeneous porous medium with components of different porosity and permeability indicate that the Klinkenberg's effect plays significant role on fluid flow in low-permeability porous media, and it is more pronounced as the Knudsen number increases. Fluid flow in a shale matrix with and without fractures is also studied, and it is found that the fractures greatly enhance the fluid flow and the Klinkenberg's effect leads to higher global permeability of the shale matrix.
△ Less
Submitted 25 November, 2014;
originally announced November 2014.
-
Uncertainty quantification for CO2 sequestration and enhanced oil recovery
Authors:
Zhenxue Dai,
Hari Viswanathan,
Julianna Fessenden-Rahn,
Richard Middleton,
Feng Pan,
Wei Jia,
Si-Yong Lee,
Brian McPherson,
William Ampomah,
Reid Grigg
Abstract:
This study develops a statistical method to perform uncertainty quantification for understanding CO2 storage potential within an enhanced oil recovery (EOR) environment at the Farnsworth Unit of the Anadarko Basin in northern Texas. A set of geostatistical-based Monte Carlo simulations of CO2-oil-water flow and reactive transport in the Morrow formation are conducted for global sensitivity and sta…
▽ More
This study develops a statistical method to perform uncertainty quantification for understanding CO2 storage potential within an enhanced oil recovery (EOR) environment at the Farnsworth Unit of the Anadarko Basin in northern Texas. A set of geostatistical-based Monte Carlo simulations of CO2-oil-water flow and reactive transport in the Morrow formation are conducted for global sensitivity and statistical analysis of the major uncertainty metrics: net CO2 injection, cumulative oil production, cumulative gas (CH4) production, and net water injection. A global sensitivity and response surface analysis indicates that reservoir permeability, porosity, and thickness are the major intrinsic reservoir parameters that control net CO2 injection/storage and oil/gas recovery rates. The well spacing and the initial water saturation also have large impact on the oil/gas recovery rates. Further, this study has revealed key insights into the potential behavior and the operational parameters of CO2 sequestration at CO2-EOR sites, including the impact of reservoir characterization uncertainty; understanding this uncertainty is critical in terms of economic decision making and the cost-effectiveness of CO2 storage through EOR.
△ Less
Submitted 18 November, 2014;
originally announced November 2014.
-
Pore-scale study of dissolution-induced changes in hydrologic properties of rocks with binary minerals
Authors:
Li Chen,
Qinjun Kang,
Hari S. Viswanathan,
Wenquan Tao
Abstract:
A pore-scale numerical model for reactive transport processes based on the Lattice Boltzmann method is used to study the dissolution-induced changes in hydrologic properties of a fractured medium and a porous medium. The solid phase of both media consists of two minerals, and a structure reconstruction method called quartet structure generation set is employed to generate the distributions of both…
▽ More
A pore-scale numerical model for reactive transport processes based on the Lattice Boltzmann method is used to study the dissolution-induced changes in hydrologic properties of a fractured medium and a porous medium. The solid phase of both media consists of two minerals, and a structure reconstruction method called quartet structure generation set is employed to generate the distributions of both minerals. Emphasis is put on the effects of undissolved minerals on the changes of permeability and porosity under different Peclet and Damkohler numbers. The simulation results show porous layers formed by the undissolved mineral remain behind the dissolution reaction front. Due to the large flow resistance in these porous layers, the permeability increases very slowly or even remains at a small value although the porosity increases by a large amount. Besides, due to the heterogeneous characteristic of the dissolution, the chemical, mechanical and hydraulic apertures are very different from each other. Further, simulations in complex porous structures demonstrate that the existence of the porous layers of the nonreactive mineral suppresses the wormholing phenomena observed in the dissolution of mono-mineralic rocks.
△ Less
Submitted 8 October, 2014;
originally announced October 2014.
