-
Mineral Detection of Neutrinos and Dark Matter 2024. Proceedings
Authors:
Sebastian Baum,
Patrick Huber,
Patrick Stengel,
Natsue Abe,
Daniel G. Ang,
Lorenzo Apollonio,
Gabriela R. Araujo,
Levente Balogh,
Pranshu Bhaumik Yilda Boukhtouchen,
Joseph Bramante,
Lorenzo Caccianiga,
Andrew Calabrese-Day,
Qing Chang,
Juan I. Collar,
Reza Ebadi,
Alexey Elykov,
Katherine Freese,
Audrey Fung,
Claudio Galelli,
Arianna E. Gleason,
Mariano Guerrero Perez,
Janina Hakenmüller,
Takeshi Hanyu,
Noriko Hasebe,
Shigenobu Hirose
, et al. (35 additional authors not shown)
Abstract:
The second "Mineral Detection of Neutrinos and Dark Matter" (MDvDM'24) meeting was held January 8-11, 2024 in Arlington, VA, USA, hosted by Virginia Tech's Center for Neutrino Physics. This document collects contributions from this workshop, providing an overview of activities in the field. MDvDM'24 was the second topical workshop dedicated to the emerging field of mineral detection of neutrinos a…
▽ More
The second "Mineral Detection of Neutrinos and Dark Matter" (MDvDM'24) meeting was held January 8-11, 2024 in Arlington, VA, USA, hosted by Virginia Tech's Center for Neutrino Physics. This document collects contributions from this workshop, providing an overview of activities in the field. MDvDM'24 was the second topical workshop dedicated to the emerging field of mineral detection of neutrinos and dark matter, following a meeting hosted by IFPU in Trieste, Italy in October 2022. Mineral detectors have been proposed for a wide variety of applications, including searching for dark matter, measuring various fluxes of astrophysical neutrinos over gigayear timescales, monitoring nuclear reactors, and nuclear disarmament protocols; both as paleo-detectors using natural minerals that could have recorded the traces of nuclear recoils for timescales as long as a billion years and as detectors recording nuclear recoil events on laboratory timescales using natural or artificial minerals. Contributions to this proceedings discuss the vast physics potential, the progress in experimental studies, and the numerous challenges lying ahead on the path towards mineral detection. These include a better understanding of the formation and annealing of recoil defects in crystals; identifying the best classes of minerals and, for paleo-detectors, understanding their geology; modeling and control of the relevant backgrounds; develo**, combining, and scaling up imaging and data analysis techniques; and many others. During the last years, MDvDM has grown rapidly and gained attention. Small-scale experimental efforts focused on establishing various microscopic readout techniques are underway at institutions in North America, Europe and Asia. We are looking ahead to an exciting future full of challenges to overcome, surprises to be encountered, and discoveries lying ahead of us.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics
Authors:
J. Aalbers,
K. Abe,
V. Aerne,
F. Agostini,
S. Ahmed Maouloud,
D. S. Akerib,
D. Yu. Akimov,
J. Akshat,
A. K. Al Musalhi,
F. Alder,
S. K. Alsum,
L. Althueser,
C. S. Amarasinghe,
F. D. Amaro,
A. Ames,
T. J. Anderson,
B. Andrieu,
N. Angelides,
E. Angelino,
J. Angevaare,
V. C. Antochi,
D. Antón Martin,
B. Antunovic,
E. Aprile,
H. M. Araújo
, et al. (572 additional authors not shown)
Abstract:
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut…
▽ More
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Simple and statistically sound recommendations for analysing physical theories
Authors:
Shehu S. AbdusSalam,
Fruzsina J. Agocs,
Benjamin C. Allanach,
Peter Athron,
Csaba Balázs,
Emanuele Bagnaschi,
Philip Bechtle,
Oliver Buchmueller,
Ankit Beniwal,
Jihyun Bhom,
Sanjay Bloor,
Torsten Bringmann,
Andy Buckley,
Anja Butter,
José Eliel Camargo-Molina,
Marcin Chrzaszcz,
Jan Conrad,
Jonathan M. Cornell,
Matthias Danninger,
Jorge de Blas,
Albert De Roeck,
Klaus Desch,
Matthew Dolan,
Herbert Dreiner,
Otto Eberhardt
, et al. (50 additional authors not shown)
Abstract:
Physical theories that depend on many parameters or are tested against data from many different experiments pose unique challenges to statistical inference. Many models in particle physics, astrophysics and cosmology fall into one or both of these categories. These issues are often sidestepped with statistically unsound ad hoc methods, involving intersection of parameter intervals estimated by mul…
▽ More
Physical theories that depend on many parameters or are tested against data from many different experiments pose unique challenges to statistical inference. Many models in particle physics, astrophysics and cosmology fall into one or both of these categories. These issues are often sidestepped with statistically unsound ad hoc methods, involving intersection of parameter intervals estimated by multiple experiments, and random or grid sampling of model parameters. Whilst these methods are easy to apply, they exhibit pathologies even in low-dimensional parameter spaces, and quickly become problematic to use and interpret in higher dimensions. In this article we give clear guidance for going beyond these procedures, suggesting where possible simple methods for performing statistically sound inference, and recommendations of readily-available software tools and standards that can assist in doing so. Our aim is to provide any physicists lacking comprehensive statistical training with recommendations for reaching correct scientific conclusions, with only a modest increase in analysis burden. Our examples can be reproduced with the code publicly available at https://doi.org/10.5281/zenodo.4322283.
△ Less
Submitted 11 April, 2022; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Compact Modeling of I-V Characteristics, Temperature Dependency, Variations, and Noise of Integrated, Reproducible Metal-Oxide Memristors
Authors:
H. Nili,
A. Vincent,
M. Prezioso,
M. R. Mahmoodi,
I. Kataeva,
D. Strukov
Abstract:
We present a comprehensive phenomenological model for the crossbar integrated metal-oxide continuous-state memristors. The model consists of static and dynamic equations, which are obtained by fitting a large amount of experimental data, collected on several hundred devices. The static equation describes the device current, at non-disturbing voltages, as a sum of three components, representing the…
▽ More
We present a comprehensive phenomenological model for the crossbar integrated metal-oxide continuous-state memristors. The model consists of static and dynamic equations, which are obtained by fitting a large amount of experimental data, collected on several hundred devices. The static equation describes the device current, at non-disturbing voltages, as a sum of three components, representing the average behavior and its device-to-device and temporal variations. All three components are expressed as functions of the applied voltage, ambient temperature, and the current memory state. The dynamic equation models the change in the memory state as a function of the applied voltage stress and the current memory state, and is also expressed as a sum of the average and the device-to-device variation terms. Both equations are explicit, computationally inexpensive, and suitable for SPICE modeling. At the same time, the model has good predictive power, which is supported by the validation results. The presented model is useful for realistic simulations of various mixed-signal computing circuits, such as image compression and image classification applications, discussed in this paper.
△ Less
Submitted 17 October, 2018;
originally announced November 2018.
-
Use of Magnetoresistive Random-Access Memory as Approximate Memory for Training Neural Networks
Authors:
Nicolas Locatelli,
Adrien F. Vincent,
Damien Querlioz
Abstract:
Hardware neural networks that implement synaptic weights with embedded non-volatile memory, such as spin torque memory (ST-MRAM), are a major lead for low energy artificial intelligence. In this work, we propose an approximate storage approach for their memory. We show that this strategy grants effective control of the bit error rate by modulating the programming pulse amplitude or duration. Accou…
▽ More
Hardware neural networks that implement synaptic weights with embedded non-volatile memory, such as spin torque memory (ST-MRAM), are a major lead for low energy artificial intelligence. In this work, we propose an approximate storage approach for their memory. We show that this strategy grants effective control of the bit error rate by modulating the programming pulse amplitude or duration. Accounting for the devices variability issue, we evaluate energy savings, and show how they translate when training a hardware neural network. On an image recognition example, 74% of programming energy can be saved by losing only 1% on the recognition performance.
△ Less
Submitted 25 October, 2018;
originally announced October 2018.
-
CNO Neutrino Grand Prix: The race to solve the solar metallicity problem
Authors:
David G. Cerdeno,
Jonathan H. Davis,
Malcolm Fairbairn,
Aaron C. Vincent
Abstract:
Several next-generation experiments aim to make the first measurement of the neutrino flux from the Carbon-Nitrogen-Oxygen (CNO) solar fusion cycle. We calculate how much time these experiments will need to run for in order to measure this flux with enough precision to tell us the metal content of the Sun's core, and thereby help to solve the solar metallicity problem. For experiments looking at n…
▽ More
Several next-generation experiments aim to make the first measurement of the neutrino flux from the Carbon-Nitrogen-Oxygen (CNO) solar fusion cycle. We calculate how much time these experiments will need to run for in order to measure this flux with enough precision to tell us the metal content of the Sun's core, and thereby help to solve the solar metallicity problem. For experiments looking at neutrino-electron scattering, we find that SNO+ will measure this CNO neutrino flux with enough precision after five years in its pure scintillator mode, provided its $^{210}$Bi background is measured to 1% accuracy. By comparison, a 100~ton liquid argon experiment such as Argo will take ten years in Gran Sasso lab, or five years in SNOLAB or ****. Borexino could obtain this precision in ten years, but this projection is very sensitive to background assumptions. For experiments looking at neutrino-nucleus scattering, the best prospects are obtained for low-threshold solid state detectors (employing either germanium or silicon). These would require new technologies to lower the experimental threshold close to detection of single electron-hole pairs, and exposures beyond those projected for next-generation dark matter detectors.
△ Less
Submitted 4 April, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Low-Energy Truly Random Number Generation with Superparamagnetic Tunnel Junctions for Unconventional Computing
Authors:
Damir Vodenicarevic,
Nicolas Locatelli,
Alice Mizrahi,
Joseph S. Friedman,
Adrien F. Vincent,
Miguel Romera,
Akio Fukushima,
Kay Yakushiji,
Hitoshi Kubota,
Shinji Yuasa,
Sandip Tiwari,
Julie Grollier,
Damien Querlioz
Abstract:
Low-energy random number generation is critical for many emerging computing schemes proposed to complement or replace von Neumann architectures. However, current random number generators are always associated with an energy cost that is prohibitive for these computing schemes. In this paper, we introduce random number bit generation based on specific nanodevices: superparamagnetic tunnel junctions…
▽ More
Low-energy random number generation is critical for many emerging computing schemes proposed to complement or replace von Neumann architectures. However, current random number generators are always associated with an energy cost that is prohibitive for these computing schemes. In this paper, we introduce random number bit generation based on specific nanodevices: superparamagnetic tunnel junctions. We experimentally demonstrate high quality random bit generation that represents orders-of-magnitude improvements in energy efficiency compared to current solutions. We show that the random generation speed improves with nanodevice scaling, and investigate the impact of temperature, magnetic field and crosstalk. Finally, we show how alternative computing schemes can be implemented using superparamagentic tunnel junctions as random number generators. These results open the way for fabricating efficient hardware computing devices leveraging stochasticity, and highlight a novel use for emerging nanodevices.
△ Less
Submitted 24 November, 2017; v1 submitted 16 June, 2017;
originally announced June 2017.
-
Atomic Layer deposition of 2D and 3D standards for quantitative synchrotron-based composition and structural analysis methods
Authors:
Nicholas G. Becker,
Anna Butterworth,
Andrey Sokolov,
Muriel Salome,
Steven Sutton,
De Andrade Vincent,
Andrew Westphal,
Thomas Proslier
Abstract:
The use of Standard Reference Materials (SRM) from the National Institute of Standards and Technology (NIST) for quantitative analysis of chemical composition using Synchrotron based X-Ray Florescence (SR-XRF) and Scanning Transmission X-Ray Microscopy (STXM) is common. These standards however can suffer from inhomogeneity in chemical composition and thickness and often require further calculation…
▽ More
The use of Standard Reference Materials (SRM) from the National Institute of Standards and Technology (NIST) for quantitative analysis of chemical composition using Synchrotron based X-Ray Florescence (SR-XRF) and Scanning Transmission X-Ray Microscopy (STXM) is common. These standards however can suffer from inhomogeneity in chemical composition and thickness and often require further calculations, based on sample mounting and detector geometry, to obtain quantitative results. These inhomogeneities negatively impact the reproducibility of the measurements and the quantitative measure itself. Atomic Layer Deposition (ALD) is an inexpensive, scalable deposition technique known for producing uniform, conformal films of a wide range of compounds on nearly any substrate material. These traits make it an ideal deposition method for producing films to replace the NIST standards and create SRM on a wide range of relevant 2D and 3D substrates. Utilizing Rutherford Backscattering, X-ray Reflectivity, Quartz crystal microbalance, STXM, and SR-XRF we show that ALD is capable of producing films that are homogenous over scales ranging from 100's of microns to nms
△ Less
Submitted 23 May, 2017;
originally announced May 2017.