-
Electro-Optic Cavities for In-Situ Measurement of Cavity Fields
Authors:
Michael S. Spencer,
Joanna M. Urban,
Maximilian Frenzel,
Niclas S. Mueller,
Olga Minakova,
Martin Wolf,
Alexander Paarmann,
Sebastian F. Maehrlein
Abstract:
Cavity electrodynamics offers a unique avenue for tailoring ground-state material properties, excited-state engineering, and versatile control of quantum matter. Merging these concepts with high-field physics in the terahertz (THz) spectral range opens the door to explore low-energy, field-driven cavity electrodynamics, emerging from fundamental resonances or order parameters. Despite this demand,…
▽ More
Cavity electrodynamics offers a unique avenue for tailoring ground-state material properties, excited-state engineering, and versatile control of quantum matter. Merging these concepts with high-field physics in the terahertz (THz) spectral range opens the door to explore low-energy, field-driven cavity electrodynamics, emerging from fundamental resonances or order parameters. Despite this demand, leveraging the full potential of field-driven material control in cavities is hindered by the lack of direct access to the intra-cavity fields. Here, we demonstrate a new concept of active cavities, consisting of electro-optic Fabry-Perot resonators, which measure their intra-cavity electric fields on sub-cycle timescales. We thereby demonstrate quantitative retrieval of the cavity modes in amplitude and phase, over a broad THz frequency range. To enable simultaneous intra-cavity sampling alongside excited-state material control, we design a tunable multi-layer cavity, enabling deterministic design of hybrid cavities for polaritonic systems. Our theoretical models reveal the origin of the avoided crossings embedded in the intricate mode dispersion, and will enable fully-switchable polaritonic effects within arbitrary materials hosted by the hybrid cavity. Electro-optic cavities (EOCs) will therefore serve as integrated probes of light-matter interactions across all coupling regimes, laying the foundation for field-resolved intra-cavity quantum electrodynamics.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Performance of a Sagnac interferometer to observe vacuum optical nonlinearity
Authors:
Aurélie Max Mailliet,
Adrien E. Kraych,
François Couchot,
Xavier Sarazin,
Elsa Baynard,
Julien Demailly,
Moana Pittman,
Arache Djannati-Ataï,
Sophie Kazamias,
Scott Robertson,
Marcel Urban
Abstract:
In Quantum Electrodynamics, vacuum becomes a nonlinear optical medium: its optical index should be modified in the presence of intense external electromagnetic fields. The DeLLight project (Deflection of Light by Light) aims to observe this effect using intense focused femtosecond laser pulses delivered by LASERIX. The principle is to measure with a Sagnac interferometer the deflection of a low-in…
▽ More
In Quantum Electrodynamics, vacuum becomes a nonlinear optical medium: its optical index should be modified in the presence of intense external electromagnetic fields. The DeLLight project (Deflection of Light by Light) aims to observe this effect using intense focused femtosecond laser pulses delivered by LASERIX. The principle is to measure with a Sagnac interferometer the deflection of a low-intensity focused pulse (probe) crossing the vacuum index gradient induced by a high-intensity pulse (pump). A Sagnac interferometer working with femtosecond laser pulses has been developed for the DeLLight project. Compared to previous prototypes, the interferometer now includes the focusing of the probe beam in the interaction area. In this article, we measure and characterize the critical experimental parameters limiting the sensitivity of the interferometer, namely the extinction factor, the spatial resolution, and the waist at focus of the probe pulse. We discuss future improvements.
△ Less
Submitted 17 April, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
Interferometric measurement of the deflection of light by light in air
Authors:
Adrien E. Kraych,
Aurélie Max Mailliet,
François Couchot,
Xavier Sarazin,
Elsa Baynard,
Julien Demailly,
Moana Pittman,
Arache Djannati-Ataï,
Sophie Kazamias,
Scott Robertson,
Marcel Urban
Abstract:
The aim of the DeLLight (Deflection of Light by Light) experiment is to observe for the first time the optical nonlinearity in vacuum, as predicted by Quantum Electrodynamics, by measuring the refraction of a low-intensity focused laser pulse (probe) when crossing the effective vacuum index gradient induced by a high-intensity focused laser pulse (pump). The deflection signal is amplified by using…
▽ More
The aim of the DeLLight (Deflection of Light by Light) experiment is to observe for the first time the optical nonlinearity in vacuum, as predicted by Quantum Electrodynamics, by measuring the refraction of a low-intensity focused laser pulse (probe) when crossing the effective vacuum index gradient induced by a high-intensity focused laser pulse (pump). The deflection signal is amplified by using a Sagnac interferometer. Here, we report the first measurement performed with the DeLLight pilot interferometer, of the deflection of light by light in air, with a low-intensity pump. We show that the deflection signal measured by the interferometer is amplified, and is in agreement with the expected signal induced by the optical Kerr effect in air. Moreover, we verify that the signal varies as expected as a function of the pump intensity, the temporal delay between the pump and the probe, and their relative polarisation. These results represent a proof of concept of the DeLLight experimental method based on interferometric amplification.
△ Less
Submitted 15 May, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
Quartz as an Accurate High-Field Low-Cost THz Helicity Detector
Authors:
Maximilian Frenzel,
Joanna M. Urban,
Leona Nest,
Tobias Kampfrath,
Michael S. Spencer,
Sebastian F. Maehrlein
Abstract:
The advent of high-field THz sources has opened the field of nonlinear THz physics and unlocked access to fundamental low energy excitations for ultrafast material control. Recent advances towards controlling and employing chiral excitations, or generally angular momentum of light, not only rely on the measurement of undistorted intense THz fields, but also on the precise knowledge about sophistic…
▽ More
The advent of high-field THz sources has opened the field of nonlinear THz physics and unlocked access to fundamental low energy excitations for ultrafast material control. Recent advances towards controlling and employing chiral excitations, or generally angular momentum of light, not only rely on the measurement of undistorted intense THz fields, but also on the precise knowledge about sophisticated THz helicity states. A recently reported and promising detector material is $α$-quartz. However, its electrooptic response function and contributing nonlinear effects have remained elusive. Here, we establish z-cut $α$-quartz as a precise electrooptic THz detector for full amplitude, phase and polarization measurement of intense THz fields, all at a fraction of costs of conventional THz detectors. We experimentally determine its complex detector response function, which is in good agreement with our model based on predominantly known literature values. It also explains previously observed thickness-dependent waveforms. These insights allow us to develop a swift and reliable protocol to precisely measure arbitrary THz polarization and helicity states. This two-dimensional electrooptic sampling (2D-EOS) in $α$-quartz fosters rapid and cost-efficient THz time-domain ellipsometry, and enables the characterization of polarization-tailored fields for driving chiral or other helicity-sensitive quasiparticles and topologies.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Nonlinear THz Control of the Lead Halide Perovskite Lattice
Authors:
Maximilian Frenzel,
Marie Cherasse,
Joanna M. Urban,
Feifan Wang,
Bo Xiang,
Leona Nest,
Lucas Huber,
Luca Perfetti,
Martin Wolf,
Tobias Kampfrath,
Xiaoyang Zhu,
Sebatian F. Maehrlein
Abstract:
Lead halide perovskites (LHPs) have emerged as an excellent class of semiconductors for next-generation solar cells and optoelectronic devices. Tailoring physical properties by fine-tuning the lattice structures has been explored in these materials by chemical composition or morphology. Nevertheless, its dynamic counterpart, phonon-driven ultrafast material control, as contemporarily harnessed for…
▽ More
Lead halide perovskites (LHPs) have emerged as an excellent class of semiconductors for next-generation solar cells and optoelectronic devices. Tailoring physical properties by fine-tuning the lattice structures has been explored in these materials by chemical composition or morphology. Nevertheless, its dynamic counterpart, phonon-driven ultrafast material control, as contemporarily harnessed for oxide perovskites, has not been established yet. Here we employ intense THz electric fields to obtain direct lattice control via nonlinear excitation of coherent octahedral twist modes in hybrid CH3NH3PbBr3 and all-inorganic CsPbBr3 perovskites. These Raman-active phonons at 0.9 - 1.3 THz are found to govern the ultrafast THz-induced Kerr effect in the low-temperature orthorhombic phase and thus dominate the phonon-modulated polarizability with potential implications for dynamic charge carrier screening beyond the Froehlich polaron. Our work opens the door to selective control of LHP's vibrational degrees of freedom governing phase transitions and dynamic disorder.
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
-
The new APD-Based Readout of the Crystal Barrel Calorimeter -- An Overview
Authors:
CBELSA/TAPS Collaboration,
:,
C. Honisch,
P. Klassen,
J. Müllers,
M. Urban,
F. Afzal,
J. Bieling,
S. Ciupka,
J. Hartmann,
P. Hoffmeister,
M. Lang,
D. Schaab,
C. Schmidt,
M. Steinacher,
D. Walther,
R. Beck,
K. -T. Brinkmann,
V. Crede,
H. Dutz,
D. Elsner,
W. Erni,
E. Fix,
F. Frommberger,
M. Grüner
, et al. (26 additional authors not shown)
Abstract:
The Crystal Barrel is an electromagnetic calorimeter consisting of 1380 CsI(Tl) scintillators, and is currently installed at the CBELSA/TAPS experiment where it is used to detect decay products from photoproduction of mesons. The readout of the Crystal Barrel has been upgraded in order to integrate the detector into the first level of the trigger and to increase its sensitivity for neutral final s…
▽ More
The Crystal Barrel is an electromagnetic calorimeter consisting of 1380 CsI(Tl) scintillators, and is currently installed at the CBELSA/TAPS experiment where it is used to detect decay products from photoproduction of mesons. The readout of the Crystal Barrel has been upgraded in order to integrate the detector into the first level of the trigger and to increase its sensitivity for neutral final states. The new readout uses avalanche photodiodes in the front-end and a dual back-end with branches optimized for energy and time measurement, respectively. An FPGA-based cluster finder processes the whole hit pattern within less than 100 ns. The important downside of APDs -- the temperature dependence of their gain -- is handled with a temperature stabilization and a compensating bias voltage supply. Additionally, a light pulser system allows the APDs' gains to be measured during beamtimes.
△ Less
Submitted 16 January, 2023; v1 submitted 23 December, 2022;
originally announced December 2022.
-
Dynamic Actuation of DNA-Assembled Plasmonic Nanostructures in Microfluidic Cell-Sized Compartments
Authors:
Kerstin Goepfrich,
Maximilian J. Urban,
Christoph Frey,
Ilia Platzman,
Joachim P. Spatz,
Na Liu
Abstract:
Molecular motor proteins form the basis of cellular dynamics. Recently, notable efforts have led to the creation of their DNA-based mimics, which can carry out complex nanoscale motion. However, such functional analogues have not yet been integrated or operated inside synthetic cells toward the goal of realizing artificial biological systems entirely from the bottom-up. In this Letter, we encapsul…
▽ More
Molecular motor proteins form the basis of cellular dynamics. Recently, notable efforts have led to the creation of their DNA-based mimics, which can carry out complex nanoscale motion. However, such functional analogues have not yet been integrated or operated inside synthetic cells toward the goal of realizing artificial biological systems entirely from the bottom-up. In this Letter, we encapsulate and actuate DNA-assembled dynamic nanostructures inside cell-sized microfluidic compartments. These encapsulated DNA nanostructures not only exhibit structural reconfigurability owing to their pH-sensitive molecular switches upon external stimuli but also possess optical feedback enabled by the integrated plasmonic probes. In particular, we demonstrate the power of microfluidic compartmentalization for achieving on-chip plasmonic enantiomer separation and substrate filtration. Our work exemplifies that the two unique tools, droplet-based microfluidics and DNA technology, offering high precision on the microscale and nanoscale, respectively, can be brought together to greatly enrich the complexity and diversity of functional synthetic systems.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Chiral Plasmonic Nanostructures Enabled by Bottom-Up Approaches
Authors:
Maximilian J. Urban,
Chenqi Shen,
Xiang-Tian Kong,
Chenggan Zhu,
Alexander O. Govorov,
Qiangbin Wang,
Mario Hentschel,
Na Liu
Abstract:
We present a comprehensive review of recent developments in the field of chiral plasmonics. Significant advances have been made recently in understanding the working principles of chiral plasmonic structures. With advances in micro- and nanofabrication techniques, a variety of chiral plasmonic nanostructures have been experimentally realized; these tailored chiroptical properties vastly outperform…
▽ More
We present a comprehensive review of recent developments in the field of chiral plasmonics. Significant advances have been made recently in understanding the working principles of chiral plasmonic structures. With advances in micro- and nanofabrication techniques, a variety of chiral plasmonic nanostructures have been experimentally realized; these tailored chiroptical properties vastly outperform those of their molecular counterparts. We focus on chiral plasmonic nanostructures created using bottom-up approaches, which not only allow for rational design and fabrication but most intriguingly in many cases also enable dynamic manipulation and tuning of chiroptical responses. We first discuss plasmon-induced chirality, resulting from the interaction of chiral molecules with plasmonic excitations. Subsequently, we discuss intrinsically chiral colloids, which give rise to optical chirality owing to their chiral shapes. Finally, we discuss plasmonic chirality, achieved by arranging achiral plasmonic particles into handed configurations on static or active templates. Chiral plasmonic nanostructures are very promising candidates for real-life applications owing to their significantly larger optical chirality than natural molecules. In addition, chiral plasmonic nanostructures offer engineerable and dynamic chiroptical responses, which are formidable to achieve in molecular systems. We thus anticipate that the field of chiral plasmonics will attract further widespread attention in applications ranging from enantioselective analysis to chiral sensing, structural determination, and in situ ultrasensitive detection of multiple disease biomarkers, as well as optical monitoring of transmembrane transport and intracellular metabolism.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
DNA-assembled nanoarchitectures with multiple components in regulated and coordinated motion
Authors:
Pengfei Zhan,
Maximilian J. Urban,
Steffen Both,
Xiaoyang Duan,
Anton Kuzyk,
Thomas Weiss,
Na Liu
Abstract:
Coordinating functional parts to operate in concert is essential for machinery. In gear trains, meshed gears are compactly interlocked, working together to impose rotation or translation. In photosynthetic systems, a variety of biological entities in the thylakoid membrane interact with each other, converting light energy into chemical energy. However, coordinating individual parts to carry out re…
▽ More
Coordinating functional parts to operate in concert is essential for machinery. In gear trains, meshed gears are compactly interlocked, working together to impose rotation or translation. In photosynthetic systems, a variety of biological entities in the thylakoid membrane interact with each other, converting light energy into chemical energy. However, coordinating individual parts to carry out regulated and coordinated motion within an artificial nanoarchitecture poses challenges, owing to the requisite control on the nanoscale. Here, we demonstrate DNA-directed nanosystems, which comprise hierarchically-assembled DNA origami filaments, fluorophores, and gold nanocrystals. These individual building blocks can execute independent, synchronous, or joint motion upon external inputs. These are optically monitored in situ using fluorescence spectroscopy, taking advantage of the sensitive distance-dependent interactions between the gold nanocrystals and fluorophores positioned on the DNA origami. Our work leverages the complexity of DNA-based artificial nanosystems with tailored dynamic functionality, representing a viable route towards technomimetic nanomachinery.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Watching a Single Fluorophore Molecule Walk into a Plasmonic Hotspot
Authors:
Ling Xin,
Mo Lu,
Steffen Both,
Markus Pfeiffer,
Maximilian J. Urban,
Chao Zhou,
Hao Yan,
Thomas Weiss,
Na Liu,
Klas Lindfors
Abstract:
Plasmonic nanoantennas allow for enhancing the spontaneous emission, altering the emission polarization, and sha** the radiation pattern of quantum emitters. A critical challenge for the experimental realizations is positioning a single emitter into the hotspot of a plasmonic antenna with nanoscale accuracy. We demonstrate a dynamic light-matter interaction nanosystem enabled by the DNA origami…
▽ More
Plasmonic nanoantennas allow for enhancing the spontaneous emission, altering the emission polarization, and sha** the radiation pattern of quantum emitters. A critical challenge for the experimental realizations is positioning a single emitter into the hotspot of a plasmonic antenna with nanoscale accuracy. We demonstrate a dynamic light-matter interaction nanosystem enabled by the DNA origami technique. A single fluorophore molecule can autonomously and unidirectionally walk into the hotspot of a plasmonic nanoantenna along a designated origami track. Successive fluorescence intensity increase and lifetime reduction are in situ monitored using single-molecule fluorescence spectroscopy, while the fluorophore walker gradually approaches and eventually enters the plasmonic hotspot. Our scheme offers a dynamic platform, which can be used to develop functional materials, investigate intriguing light-matter interaction phenomena, and serve as prototype system for examining theoretical models.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Dynamic Plasmonic System That Responds to Thermal and Aptamer-Target Regulations
Authors:
Chao Zhou,
Ling Xin,
Xiaoyang Duan,
Maximilian J. Urban,
Na Liu
Abstract:
The DNA origami technique has empowered a new paradigm in plasmonics for manipulating light and matter at the nanoscale. This interdisciplinary field has witnessed vigorous growth, outlining a viable route to construct advanced plasmonic architectures with tailored optical properties. However, so far plasmonic systems templated by DNA origami have been restricted to respond to only single stimuli.…
▽ More
The DNA origami technique has empowered a new paradigm in plasmonics for manipulating light and matter at the nanoscale. This interdisciplinary field has witnessed vigorous growth, outlining a viable route to construct advanced plasmonic architectures with tailored optical properties. However, so far plasmonic systems templated by DNA origami have been restricted to respond to only single stimuli. Despite broad interest and scientific importance, thermal and aptamer-target regulations have not yet been widely utilized to reconfigure three-dimensional plasmonic architectures. In this Letter, we demonstrate a chiral plasmonic nanosystem integrated with split aptamers, which can respond to both thermal and aptamer-target regulations. We show that our dual-responsive system can be noninvasively tuned in a wide range of temperatures, readily correlating thermal control with optical signal changes. Meanwhile, our system can detect specific targets including adenosine triphosphate and cocaine molecules, which further enhance the optical response modulations and in turn influence the thermal tunability.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Gold nanocrystal-mediated sliding of doublet DNA origami filaments
Authors:
Maximilian J. Urban,
Steffen Both,
Chao Zhou,
Anton Kuzyk,
Klas Lindfors,
Thomas Weiss,
Na Liu
Abstract:
Sliding is one of the fundamental mechanical movements in machinery. In macroscopic systems, double-rack pinion machines employ gears to slide two linear tracks along opposite directions. In microscopic systems, kinesin-5 proteins crosslink and slide apart antiparallel microtubules, promoting spindle bipolarity and elongation during mitosis. Here we demonstrate an artificial nanoscopic analog, in…
▽ More
Sliding is one of the fundamental mechanical movements in machinery. In macroscopic systems, double-rack pinion machines employ gears to slide two linear tracks along opposite directions. In microscopic systems, kinesin-5 proteins crosslink and slide apart antiparallel microtubules, promoting spindle bipolarity and elongation during mitosis. Here we demonstrate an artificial nanoscopic analog, in which gold nanocrystals can mediate coordinated sliding of two antiparallel DNA origami filaments powered by DNA fuels. Stepwise and reversible sliding along opposite directions is in situ monitored and confirmed using fluorescence spectroscopy. A theoretical model including different energy transfer mechanisms is developed to understand the observed fluorescence dynamics. We further show that such sliding can also take place in the presence of multiple DNA sidelocks that are introduced to inhibit the relative movements. Our work enriches the toolbox of DNA-based nanomachinery, taking one step further toward the vision of molecular nanofactories.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Selective control of reconfigurable chiral plasmonic metamolecules
Authors:
Anton Kuzyk,
Maximilian J. Urban,
Andrea Idili,
Francesco Ricci,
Na Liu
Abstract:
Selective configuration control of plasmonic nanostructures using either top-down or bottom-up approaches has remained challenging in the field of active plasmonics. We demonstrate the realization of DNA-assembled reconfigurable plasmonic metamolecules, which can respond to a wide range of pH changes in a programmable manner. This programmability allows for selective reconfiguration of different p…
▽ More
Selective configuration control of plasmonic nanostructures using either top-down or bottom-up approaches has remained challenging in the field of active plasmonics. We demonstrate the realization of DNA-assembled reconfigurable plasmonic metamolecules, which can respond to a wide range of pH changes in a programmable manner. This programmability allows for selective reconfiguration of different plasmonic metamolecule species coexisting in solution through simple pH tuning. This approach enables discrimination of chiral plasmonic quasi-enantiomers and arbitrary tuning of chiroptical effects with unprecedented degrees of freedom. Our work outlines a new blueprint for implementation of advanced active plasmonic systems, in which individual structural species can be programmed to perform multiple tasks and functions in response to independent external stimuli.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Plane Wave Elastography: A Frequency-Domain Ultrasound Shear Wave Elastography Approach
Authors:
Reza Khodayi-mehr,
Matthew W. Urban,
Michael M. Zavlanos,
Wilkins Aquino
Abstract:
In this paper, we propose Plane Wave Elastography (PWE), a novel ultrasound shear wave elastography (SWE) approach. Currently, commercial methods for SWE rely on directional filtering based on the prior knowledge of the wave propagation direction, to remove complicated wave patterns formed due to reflection and refraction. The result is a set of decomposed directional waves that are separately ana…
▽ More
In this paper, we propose Plane Wave Elastography (PWE), a novel ultrasound shear wave elastography (SWE) approach. Currently, commercial methods for SWE rely on directional filtering based on the prior knowledge of the wave propagation direction, to remove complicated wave patterns formed due to reflection and refraction. The result is a set of decomposed directional waves that are separately analyzed to construct shear modulus fields that are then combined through compounding. Instead, PWE relies on a rigorous representation of the wave propagation using the frequency-domain scalar wave equation to automatically select appropriate propagation directions and simultaneously reconstruct shear modulus fields. Specifically, assuming a homogeneous, isotropic, incompressible, linear-elastic medium, we represent the solution of the wave equation using a linear combination of plane waves propagating in arbitrary directions. Given this closed-form solution, we formulate the SWE problem as a nonlinear least-squares optimization problem which can be solved very efficiently. Through numerous phantom studies, we show that PWE can handle complicated waveforms without prior filtering and is competitive with state-of-the-art that requires prior filtering based on the knowledge of propagation directions.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
The DeLLight experiment to observe an optically-induced change of the vacuum index
Authors:
Scott Robertson,
Aurélie Mailliet,
Xavier Sarazin,
François Couchot,
Elsa Baynard,
Julien Demailly,
Moana Pittman,
Arache Djannati-Ataï,
Sophie Kazamias,
Marcel Urban
Abstract:
Quantum electrodynamics predicts that the vacuum must behave as a nonlinear optical medium: the speed of light should be modified when the vacuum is stressed by intense electromagnetic fields. This optical phenomenon has not yet been observed. The DeLLight (Deflection of Light by Light) experiment aims to observe the optically-induced index change of vacuum, a nonlinear effect which has never been…
▽ More
Quantum electrodynamics predicts that the vacuum must behave as a nonlinear optical medium: the speed of light should be modified when the vacuum is stressed by intense electromagnetic fields. This optical phenomenon has not yet been observed. The DeLLight (Deflection of Light by Light) experiment aims to observe the optically-induced index change of vacuum, a nonlinear effect which has never been explored. The experiment is installed in the LASERIX facility at IJCLab, which delivers ultra-short intense laser pulses (2.5 J per pulse, each of 30 fs duration, with a 10 Hz repetition rate). The proposal is to measure the refraction of a probe laser pulse when crossing a transverse vacuum index gradient, produced by a very intense pump pulse. The refraction induces a transverse shift in the intensity profile of the probe, whose signal is amplified by a Sagnac interferometer. In this article, we describe the experimental method and setup, and present the complete theoretical calculations for the expected signal. With a minimum waist at focus of $5 \,μ$m (corresponding to a maximum intensity of $\sim 3 \times 10^{20}$ W/cm$^2$), and with the nonlinear vacuum index derived from QED, the expected refraction angle is 0.13 prad. First results of the interferometer prototype are presented. It is shown that an extinction factor $\mathcal{F} = 0.4 \times 10^{-5}$ (corresponding to a signal amplification factor of 250) and a spatial resolution $σ_y = 10$ nm are achievable. The expected signal is then about 15 pm, and could be observed at a 5-sigma confidence level with about one month of collected data.
△ Less
Submitted 29 January, 2021; v1 submitted 27 November, 2020;
originally announced November 2020.
-
Studies on the response of a water-Cherenkov detector of the Pierre Auger Observatory to atmospheric muons using an RPC hodoscope
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
P. R. Araújo Ferreira,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
K. H. Becker
, et al. (353 additional authors not shown)
Abstract:
Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowled…
▽ More
Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowledge of the WCD response to muons is paramount in establishing the exact level of this discrepancy. In this work, we report on a study of the response of a WCD of the Pierre Auger Observatory to atmospheric muons performed with a hodoscope made of resistive plate chambers (RPCs), enabling us to select and reconstruct nearly 600 thousand single muon trajectories with zenith angles ranging from 0$^\circ$ to 55$^\circ$. Comparison of distributions of key observables between the hodoscope data and the predictions of dedicated simulations allows us to demonstrate the accuracy of the latter at a level of 2%. As the WCD calibration is based on its response to atmospheric muons, the hodoscope data are also exploited to show the long-term stability of the procedure.
△ Less
Submitted 9 September, 2020; v1 submitted 8 July, 2020;
originally announced July 2020.
-
A Bayesian approach to regional decadal predictability: Sparse parameter estimation in high-dimensional linear inverse models of high-latitude sea surface temperature variability
Authors:
Dallas Foster,
Darin Comeau,
Nathan M. Urban
Abstract:
Stochastic reduced models are an important tool in climate systems whose many spatial and temporal scales cannot be fully discretized or underlying physics may not be fully accounted for. One form of reduced model, the linear inverse model (LIM), has been widely used for regional climate predictability studies - typically focusing more on tropical or mid-latitude studies. However, most LIM fitting…
▽ More
Stochastic reduced models are an important tool in climate systems whose many spatial and temporal scales cannot be fully discretized or underlying physics may not be fully accounted for. One form of reduced model, the linear inverse model (LIM), has been widely used for regional climate predictability studies - typically focusing more on tropical or mid-latitude studies. However, most LIM fitting techniques rely on point estimation techniques deriving from fluctuation-dissipation theory. In this methodological study we explore the use of Bayesian inference techniques for LIM parameter estimation of sea surface temperature (SST), to quantify the skillful decadal predictability of Bayesian LIM models at high latitudes. We show that Bayesian methods, when compared to traditional point estimation methods for LIM-type models, provide better calibrated probabilistic skill, while simultaneously providing better point estimates due to the regularization effect of the prior distribution in high-dimensional problems. We compare the effect of several priors, as well as maximum likelihood estimates, on (1) estimating parameter values on a perfect model experiment and (2) producing calibrated 1-year SST anomaly forecast distributions using a pre-industrial control run of the Community Earth System Model (CESM). Finally, we employ a host of probabilistic skill metrics to determine the extent to which a LIM can forecast SST anomalies at high latitudes. We find that the choice of prior distribution has an appreciable impact on estimation outcomes, and priors that emphasize physically relevant properties enhance the model's ability to capture variability of SST anomalies.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Towards Novel Insights in Lattice Field Theory with Explainable Machine Learning
Authors:
Stefan Bluecher,
Lukas Kades,
Jan M. Pawlowski,
Nils Strodthoff,
Julian M. Urban
Abstract:
Machine learning has the potential to aid our understanding of phase structures in lattice quantum field theories through the statistical analysis of Monte Carlo samples. Available algorithms, in particular those based on deep learning, often demonstrate remarkable performance in the search for previously unidentified features, but tend to lack transparency if applied naively. To address these sho…
▽ More
Machine learning has the potential to aid our understanding of phase structures in lattice quantum field theories through the statistical analysis of Monte Carlo samples. Available algorithms, in particular those based on deep learning, often demonstrate remarkable performance in the search for previously unidentified features, but tend to lack transparency if applied naively. To address these shortcomings, we propose representation learning in combination with interpretability methods as a framework for the identification of observables. More specifically, we investigate action parameter regression as a pretext task while using layer-wise relevance propagation (LRP) to identify the most important observables depending on the location in the phase diagram. The approach is put to work in the context of a scalar Yukawa model in (2+1)d. First, we investigate a multilayer perceptron to determine an importance hierarchy of several predefined, standard observables. The method is then applied directly to the raw field configurations using a convolutional network, demonstrating the ability to reconstruct all order parameters from the learned filter weights. Based on our results, we argue that due to its broad applicability, attribution methods such as LRP could prove a useful and versatile tool in our search for new physical insights. In the case of the Yukawa model, it facilitates the construction of an observable that characterises the symmetric phase.
△ Less
Submitted 18 May, 2020; v1 submitted 3 March, 2020;
originally announced March 2020.
-
Technical Design Report for the PANDA Endcap Disc DIRC
Authors:
Panda Collaboration,
F. Davi,
W. Erni,
B. Krusche,
M. Steinacher,
N. Walford,
H. Liu,
Z. Liu,
B. Liu,
X. Shen,
C. Wang,
J. Zhao,
M. Albrecht,
T. Erlen,
F. Feldbauer,
M. Fink,
V. Freudenreich,
M. Fritsch,
F. H. Heinsius,
T. Held,
T. Holtmann,
I. Keshk,
H. Koch,
B. Kopf,
M. Kuhlmann
, et al. (441 additional authors not shown)
Abstract:
PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c.…
▽ More
PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c. PANDA is designed to reach a maximum luminosity of 2x10^32 cm^2 s. Most of the physics programs require an excellent particle identification (PID). The PID of hadronic states at the forward endcap of the target spectrometer will be done by a fast and compact Cherenkov detector that uses the detection of internally reflected Cherenkov light (DIRC) principle. It is designed to cover the polar angle range from 5° to 22° and to provide a separation power for the separation of charged pions and kaons up to 3 standard deviations (s.d.) for particle momenta up to 4 GeV/c in order to cover the important particle phase space. This document describes the technical design and the expected performance of the novel PANDA Disc DIRC detector that has not been used in any other high energy physics experiment (HEP) before. The performance has been studied with Monte-Carlo simulations and various beam tests at DESY and CERN. The final design meets all PANDA requirements and guarantees suffcient safety margins.
△ Less
Submitted 29 December, 2019;
originally announced December 2019.
-
Spectral Reconstruction with Deep Neural Networks
Authors:
Lukas Kades,
Jan M. Pawlowski,
Alexander Rothkopf,
Manuel Scherzer,
Julian M. Urban,
Sebastian J. Wetzel,
Nicolas Wink,
Felix P. G. Ziegler
Abstract:
We explore artificial neural networks as a tool for the reconstruction of spectral functions from imaginary time Green's functions, a classic ill-conditioned inverse problem. Our ansatz is based on a supervised learning framework in which prior knowledge is encoded in the training data and the inverse transformation manifold is explicitly parametrised through a neural network. We systematically in…
▽ More
We explore artificial neural networks as a tool for the reconstruction of spectral functions from imaginary time Green's functions, a classic ill-conditioned inverse problem. Our ansatz is based on a supervised learning framework in which prior knowledge is encoded in the training data and the inverse transformation manifold is explicitly parametrised through a neural network. We systematically investigate this novel reconstruction approach, providing a detailed analysis of its performance on physically motivated mock data, and compare it to established methods of Bayesian inference. The reconstruction accuracy is found to be at least comparable, and potentially superior in particular at larger noise levels. We argue that the use of labelled training data in a supervised setting and the freedom in defining an optimisation objective are inherent advantages of the present approach and may lead to significant improvements over state-of-the-art methods in the future. Potential directions for further research are discussed in detail.
△ Less
Submitted 1 February, 2021; v1 submitted 10 May, 2019;
originally announced May 2019.
-
Improved Representation of Ocean Heat Content in Energy Balance Models
Authors:
Balasubramanya T. Nadiga,
Nathan M. Urban
Abstract:
Anomaly-diffusing energy balance models (AD-EBM) are routinely employed to analyze and emulate the warming response of both observed and simulated Earth systems. We demonstrate a deficiency in common multi-layer as well as continuous-diffusion AD-EBM variants: They are unable to, simultaneously, properly represent surface warming and the vertical distribution of heat uptake. We show that this inab…
▽ More
Anomaly-diffusing energy balance models (AD-EBM) are routinely employed to analyze and emulate the warming response of both observed and simulated Earth systems. We demonstrate a deficiency in common multi-layer as well as continuous-diffusion AD-EBM variants: They are unable to, simultaneously, properly represent surface warming and the vertical distribution of heat uptake. We show that this inability is due to the diffusion approximation. On the other hand, it is well understood that transport of water from the surface mixed layer into the ocean interior is achieved, in large part, by the process of ventilation---a process associated with outcrop** isopycnals. We, therefore, start from a configuration of outcrop** isopycnals and demonstrate how an AD-EBM can be modified to include the effect of ventilation on ocean uptake of anomalous radiative forcing. The resulting EBM is able to successfully represent both surface warming and the vertical distribution of heat uptake, and indeed, a simple four layer model suffices. The simplicity of the models notwithstanding, the analysis presented and the necessity of the modification highlight the role played by processes related to the down-welling branch of global ocean circulation in sha** the vertical distribution of ocean heat uptake.
△ Less
Submitted 27 February, 2019;
originally announced February 2019.
-
Reducing Autocorrelation Times in Lattice Simulations with Generative Adversarial Networks
Authors:
Jan M. Pawlowski,
Julian M. Urban
Abstract:
Short autocorrelation times are essential for a reliable error assessment in Monte Carlo simulations of lattice systems. In many interesting scenarios, the decay of autocorrelations in the Markov chain is prohibitively slow. Generative samplers can provide statistically independent field configurations, thereby potentially ameliorating these issues. In this work, the applicability of neural sample…
▽ More
Short autocorrelation times are essential for a reliable error assessment in Monte Carlo simulations of lattice systems. In many interesting scenarios, the decay of autocorrelations in the Markov chain is prohibitively slow. Generative samplers can provide statistically independent field configurations, thereby potentially ameliorating these issues. In this work, the applicability of neural samplers to this problem is investigated. Specifically, we work with a generative adversarial network (GAN). We propose to address difficulties regarding its statistical exactness through the implementation of an overrelaxation step, by searching the latent space of the trained generator network. This procedure can be incorporated into a standard Monte Carlo algorithm, which then permits a sensible assessment of ergodicity and balance based on consistency checks. Numerical results for real, scalar $φ^4$-theory in two dimensions are presented. We achieve a significant reduction of autocorrelations while accurately reproducing the correct statistics. We discuss possible improvements to the approach as well as potential solutions to persisting issues.
△ Less
Submitted 23 December, 2021; v1 submitted 8 November, 2018;
originally announced November 2018.
-
Dependence of Inferred Climate Sensitivity on the Discrepancy Model
Authors:
B. T. Nadiga,
N. M. Urban
Abstract:
We consider the effect of different temporal error structures on the inference of equilibrium climate sensitivity\footnote{ECS is defined as the realized equilibrium surface warming---globally-averaged surface air temperature---for a doubling of CO$_2$}(ECS), in the context of an energy balance model (EBM) that is commonly employed in analyzing earth system models (ESM) and observations. We consid…
▽ More
We consider the effect of different temporal error structures on the inference of equilibrium climate sensitivity\footnote{ECS is defined as the realized equilibrium surface warming---globally-averaged surface air temperature---for a doubling of CO$_2$}(ECS), in the context of an energy balance model (EBM) that is commonly employed in analyzing earth system models (ESM) and observations. We consider error structures ranging from uncorrelated (IID normal) to AR(1) to Gaussian correlation (Gaussian Process GP) to analyze the abrupt 4xCO$_2$ CMIP5 experiment in twenty-one different ESMs. For seven of the ESMs, the posterior distribution of ECS is seen to depend rather weakly on the discrepancy model used suggesting that the discrepancies were largely uncorrelated. However, large differences for four, and moderate differences for the rest of the ESMs, leads us to suggest that AR(1) is an appropriate discrepancy correlation structure to use in situations such as the one considered in this article. Other significant findings include: (a) When estimates of ECS (mode) were differrent, estimates using IID were higher (b) For four of the ESMs, uncertainty in the inference of ECS was higher with the IID discrepancy structure than with the other correlated structures, and (c) Uncertainty in the estimation of GP parameters were much higher than with the estimation of IID or AR(1) parameters, possibly due to identifiability issues. They need to be investigated further.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
Dimensionality-Reduction of Climate Data using Deep Autoencoders
Authors:
J. A. Saenz,
N. Lubbers,
N. M. Urban
Abstract:
We explore the use of deep neural networks for nonlinear dimensionality reduction in climate applications. We train convolutional autoencoders (CAEs) to encode two temperature field datasets from pre-industrial control runs in the CMIP5 first ensemble, obtained with the CCSM4 model and the IPSL-CM5A-LR model, respectively. With the later dataset, consisting of 36500 96$\times$96 surface temperatur…
▽ More
We explore the use of deep neural networks for nonlinear dimensionality reduction in climate applications. We train convolutional autoencoders (CAEs) to encode two temperature field datasets from pre-industrial control runs in the CMIP5 first ensemble, obtained with the CCSM4 model and the IPSL-CM5A-LR model, respectively. With the later dataset, consisting of 36500 96$\times$96 surface temperature fields, the CAE out-performs PCA in terms of mean squared error of the reconstruction from a 40 dimensional encoding. Moreover, the noise in the filters of the convolutional layers in the autoencoders suggests that the CAE can be trained to produce better results. Our results indicate that convolutional autoencoders may provide an effective platform for the construction of surrogate climate models.
△ Less
Submitted 27 August, 2018;
originally announced September 2018.
-
Can the apparent expansion of the Universe be attributed to an increasing vacuum refractive index ?
Authors:
X. Sarazin,
F. Couchot,
A. Djannati-Atai,
M. Urban
Abstract:
H.A. Wilson, then R.H. Dicke, proposed to describe gravitation by a spatial change of the refractive index of the vacuum around a gravitational mass. Dicke extended this formalism in order to describe the apparent expansion of the Universe by a cosmological time dependence of the global vacuum index. In this paper, we develop Dicke's formalism. The metric expansion in standard cosmology (the time-…
▽ More
H.A. Wilson, then R.H. Dicke, proposed to describe gravitation by a spatial change of the refractive index of the vacuum around a gravitational mass. Dicke extended this formalism in order to describe the apparent expansion of the Universe by a cosmological time dependence of the global vacuum index. In this paper, we develop Dicke's formalism. The metric expansion in standard cosmology (the time-dependent scale factor of the Friedmann-Lemaître curved spacetime metric) is replaced by a flat and static Euclidean metric with a change with time of the vacuum index. We show that a vacuum index increasing with time produces both the cosmological redshift and time dilation, and that the predicted evolution of the energy density of the cosmological microwave background is consistent with the standard cosmology. We then show that the type Ia supernovae data, from the joint SDSS-II and SNLS SNe-Ia samples, are well modeled by a vacuum index varying exponentially as n(t)=exp(t/tau0), where tau0=8.0+0.2-0.8 Gyr. The main consequence of this formalism is that the cosmological redshift should affect any atom, with a relative decrease of the energy levels of about -2 10^{-18} per second. Possibilities for an experimental investigation of this prediction are discussed.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
Plasmonic Toroidal Metamolecules Assembled by DNA Origami
Authors:
Maximilian J. Urban,
Palash K. Dutta,
Pengfei Wang,
Xiaoyang Duan,
Xibo Shen,
Baoquan Ding,
Yonggang Ke,
Na Liu
Abstract:
We demonstrate hierarchical assembly of plasmonic toroidal metamolecules, which exhibit tailored optical activity in the visible spectral range. Each metamolecule consists of four identical origami-templated helical building blocks. Such toroidal metamolecules show stronger chiroptical response than monomers and dimers of the helical building blocks. Enantiomers of the plasmonic structures yield o…
▽ More
We demonstrate hierarchical assembly of plasmonic toroidal metamolecules, which exhibit tailored optical activity in the visible spectral range. Each metamolecule consists of four identical origami-templated helical building blocks. Such toroidal metamolecules show stronger chiroptical response than monomers and dimers of the helical building blocks. Enantiomers of the plasmonic structures yield opposite circular dichroism spectra. The experimental results agree well with the theoretical simulations. We also demonstrate that given the circular symmetry of the structures, distinct chiroptical response along their axial orientation can be uncovered via simple spin-coating of the metamolecules on substrates. Our work provides a new strategy to create plasmonic chiral platforms with sophisticated nanoscale architectures for potential applications such as chiral sensing using chemically-based assembly systems.
△ Less
Submitted 18 March, 2018;
originally announced March 2018.
-
Optically resolving the dynamic walking of a plasmonic walker couple
Authors:
Maximilian J. Urban,
Chao Zhou,
Xiaoyang Duan,
Na Liu
Abstract:
Deterministic placement and dynamic manipulation of individual plasmonic nanoparticles with nanoscale precision feature an important step towards active nanoplasmonic devices with prescribed levels of performance and functionalities at optical frequencies. In this Letter, we demonstrate a plasmonic walker couple system, in which two gold nanorod walkers can independently or simultaneously perform…
▽ More
Deterministic placement and dynamic manipulation of individual plasmonic nanoparticles with nanoscale precision feature an important step towards active nanoplasmonic devices with prescribed levels of performance and functionalities at optical frequencies. In this Letter, we demonstrate a plasmonic walker couple system, in which two gold nanorod walkers can independently or simultaneously perform stepwise walking powered by DNA hybridization along the same DNA origami track. We utilize optical spectroscopy to resolve such dynamic walking with nanoscale steps well below the optical diffraction limit. We also show that the number of walkers and the optical response of the system can be correlated. Our studies exemplify the power of plasmonics, when integrated with DNA nanotechnology for realization of advanced artificial nanomachinery with tailored optical functionalities.
△ Less
Submitted 18 March, 2018;
originally announced March 2018.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Experiment Software and Projects on the Web with VISPA
Authors:
Martin Erdmann,
Benjamin Fischer,
Robert Fischer,
Erik Geiser,
Christian Glaser,
Gero Mueller,
Marcel Rieger,
Martin Urban,
Ralf Florian von Cube,
Christoph Welling
Abstract:
The Visual Physics Analysis (VISPA) project defines a toolbox for accessing software via the web. It is based on latest web technologies and provides a powerful extension mechanism that enables to interface a wide range of applications. Beyond basic applications such as a code editor, a file browser, or a terminal, it meets the demands of sophisticated experiment-specific use cases that focus on p…
▽ More
The Visual Physics Analysis (VISPA) project defines a toolbox for accessing software via the web. It is based on latest web technologies and provides a powerful extension mechanism that enables to interface a wide range of applications. Beyond basic applications such as a code editor, a file browser, or a terminal, it meets the demands of sophisticated experiment-specific use cases that focus on physics data analyses and typically require a high degree of interactivity. As an example, we developed a data inspector that is capable of browsing interactively through event content of several data formats, e.g., "MiniAOD" which is utilized by the CMS collaboration. The VISPA extension mechanism can also be used to embed external web-based applications that benefit from dynamic allocation of user-defined computing resources via SSH. For example, by wrap** the "JSROOT" project, ROOT files located on any remote machine can be inspected directly through a VISPA server instance. We introduced domains that combine groups of users and role-based permissions. Thereby, tailored projects are enabled, e.g. for teaching where access to student's homework is restricted to a team of tutors, or for experiment-specific data that may only be accessible for members of the collaboration. We present the extension mechanism including corresponding applications and give an outlook onto the new permission system.
△ Less
Submitted 3 June, 2017;
originally announced June 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Feasibility study for the measurement of $πN$ TDAs at PANDA in $\bar{p}p\to J/ψπ^0$
Authors:
PANDA Collaboration,
B. Singh,
W. Erni,
B. Krusche,
M. Steinacher,
N. Walford,
H. Liu,
Z. Liu,
B. Liu,
X. Shen,
C. Wang,
J. Zhao,
M. Albrecht,
T. Erlen,
M. Fink,
F. H. Heinsius,
T. Held,
T. Holtmann,
S. Jasper,
I. Keshk,
H. Koch,
B. Kopf,
M. Kuhlmann,
M. Kümmel,
S. Leiber
, et al. (488 additional authors not shown)
Abstract:
The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as…
▽ More
The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the $\bar{p}p\toπ^+π^-π^0$ and $\bar{p}p\to J/ψπ^0π^0$ reactions are performed with PandaRoot, the simulation and analysis software framework of the PANDA experiment. It is shown that the measurement can be done at PANDA with significant constraining power under the assumption of an integrated luminosity attainable in four to five months of data taking at the maximum design luminosity.
△ Less
Submitted 7 October, 2016;
originally announced October 2016.
-
Curating Transient Population in Urban Dynamics System
Authors:
Gautam S. Thakur,
Kevin A. Sparks,
Robert N. Stewart,
Marie L. Urban,
Budhendra L. Bhaduri
Abstract:
For past several decades, research efforts in population modelling has proven its efficacy in understanding the basic information about residential and commercial areas, as well as for the purposes of planning, development and improvement of the community as an eco-system. More or less, such efforts assume static nature of population distribution, in turn limited by the current ability to capture…
▽ More
For past several decades, research efforts in population modelling has proven its efficacy in understanding the basic information about residential and commercial areas, as well as for the purposes of planning, development and improvement of the community as an eco-system. More or less, such efforts assume static nature of population distribution, in turn limited by the current ability to capture the dynamics of population change at a finer resolution of space and time. Fast forward today, more and more people are becoming mobile, traveling across borders impacting the nuts and bolts of our urban fabric. Unfortunately, our current efforts are being surpassed by the need to capture such transient population. It is becoming imperative to identify and define them, as well as measure their dynamics and interconnectedness. In this work, we intend to research urban population mobility patterns, gauge their transient nature, and extend our knowledge of their visited locations. We plan to achieve this by designing and develo** novel methods and using VGI data that models and characterizes transient population dynamics.
△ Less
Submitted 27 June, 2016;
originally announced June 2016.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Refraction of light by light in vacuum
Authors:
X. Sarazin,
F. Couchot,
A. Djannati-Atai,
O. Guilbaud,
S. Kazamias,
M. Pittman,
M. Urban
Abstract:
In very intense electromagnetic fields, the vacuum refractive index is expected to be modified due to nonlinear quantum electrodynamics (QED) properties. Several experimental tests using high intensity lasers have been proposed to observe electromagnetic nonlinearities in vacuum, such as the diffraction or the reflection of intense laser pulses. We propose a new approach which consists in observin…
▽ More
In very intense electromagnetic fields, the vacuum refractive index is expected to be modified due to nonlinear quantum electrodynamics (QED) properties. Several experimental tests using high intensity lasers have been proposed to observe electromagnetic nonlinearities in vacuum, such as the diffraction or the reflection of intense laser pulses. We propose a new approach which consists in observing the refraction, i.e. the rotation of the waveplanes of a probe laser pulse crossing a transverse vacuum index gradient. The latter is produced by the interaction of two very intense and ultra short laser pulses, used as pump pulses. At the maximum of the index gradient, the refraction angle of the probe pulse is estimated to be $0.2 \times (\frac{w_0}{10 \mathrm{μm}})^{-3} \times \frac{I}{1 \mathrm{J}}$~picoradians, where $I$ is the total energy of the two pump pulses and $w_0$ is the minimum waist (fwhm) at the interaction area. Assuming the most intense laser pulses attainable by the LASERIX facility ($I = 25$~J, 30~fs fwhm duration, 800~nm central wavelength) and assuming a minimum waist of $w=10 \mathrm{μm}$ (fwhm) (corresponding to an intensity of the order of $10^{21}$~W/cm$^2$), the expected maximum refraction angle is about 5~picoradians. An experimental setup, using a Sagnac interferometer, is proposed to perform this measurement.
△ Less
Submitted 2 December, 2015; v1 submitted 21 July, 2015;
originally announced July 2015.
-
A field study of data analysis exercises in a bachelor physics course using the internet platform VISPA
Authors:
Martin Erdmann,
Robert Fischer,
Christian Glaser,
Dennis Klingebiel,
Raphael Krause,
Daniel Kuempel,
Gero Mueller,
Marcel Rieger,
Jan Steggemann,
Martin Urban,
David Walz,
Klaus Weidenhaupt,
Tobias Winchen,
Birgitta Weltermann
Abstract:
Bachelor physics lectures on particle physics and astrophysics were complemented by exercises related to data analysis and data interpretation at the RWTH Aachen University recently. The students performed these exercises using the internet platform VISPA, which provides a development environment for physics data analyses. We describe the platform and its application within the physics course, and…
▽ More
Bachelor physics lectures on particle physics and astrophysics were complemented by exercises related to data analysis and data interpretation at the RWTH Aachen University recently. The students performed these exercises using the internet platform VISPA, which provides a development environment for physics data analyses. We describe the platform and its application within the physics course, and present the results of a student survey. The students acceptance of the learning project was positive. The level of acceptance was related to their individual preference for learning with a computer. Furthermore, students with good programming skills favor working individually, while students who attribute themselves having low programming abilities favor working in teams. The students appreciated approaching actual research through the data analysis tasks.
△ Less
Submitted 12 February, 2014;
originally announced February 2014.
-
The quantum vacuum as the origin of the speed of light
Authors:
Marcel Urban,
Francois Couchot,
Xavier Sarazin,
Arache Djannati-Atai
Abstract:
We show that the vacuum permeability and permittivity may originate from the magnetization and the polarization of continuously appearing and disappearing fermion pairs. We then show that if we simply model the propagation of the photon in vacuum as a series of transient captures within these ephemeral pairs, we can derive a finite photon velocity. Requiring that this velocity is equal to the spee…
▽ More
We show that the vacuum permeability and permittivity may originate from the magnetization and the polarization of continuously appearing and disappearing fermion pairs. We then show that if we simply model the propagation of the photon in vacuum as a series of transient captures within these ephemeral pairs, we can derive a finite photon velocity. Requiring that this velocity is equal to the speed of light constrains our model of vacuum. Within this approach, the propagation of a photon is a statistical process at scales much larger than the Planck scale. Therefore we expect its time of flight to fluctuate. We propose an experimental test of this prediction.
△ Less
Submitted 21 February, 2013;
originally announced February 2013.
-
Ramsauer approach for light scattering on non-absorbing spherical particles and application to the Henyey-Greenstein phase function
Authors:
K. Louedec,
M. Urban
Abstract:
We present a new method to study light scattering on non-absorbing spherical particles. This method is based on the Ramsauer approach, a model known in atomic an nuclear physics. Its main advantage is its intuitive understanding of the underlying physics phenomena. We show that although the approximations are numerous, the Ramsauer analytical solutions describe fairly well the scattering phase fun…
▽ More
We present a new method to study light scattering on non-absorbing spherical particles. This method is based on the Ramsauer approach, a model known in atomic an nuclear physics. Its main advantage is its intuitive understanding of the underlying physics phenomena. We show that although the approximations are numerous, the Ramsauer analytical solutions describe fairly well the scattering phase function and the total cross section. Then this model is applied to the Henyey-Greenstein parameterisation of scattering phase function to give a relation between its asymmetry parameter and the mean particle size.
△ Less
Submitted 5 November, 2012;
originally announced November 2012.
-
A mechanism giving a finite value to the speed of light, and some experimental consequences
Authors:
M. Urban,
F. Couchot,
X. Sarazin
Abstract:
We admit that the vacuum is not empty but is filled with continuously appearing and disappearing virtual fermion pairs. We show that if we simply model the propagation of the photon in vacuum as a series of transient captures within the virtual pairs, we can derive the finite light velocity $c$ as the average delay on the photon propagation. We then show that the vacuum permittivity $ε_0$ and perm…
▽ More
We admit that the vacuum is not empty but is filled with continuously appearing and disappearing virtual fermion pairs. We show that if we simply model the propagation of the photon in vacuum as a series of transient captures within the virtual pairs, we can derive the finite light velocity $c$ as the average delay on the photon propagation. We then show that the vacuum permittivity $ε_0$ and permeability $μ_0$ originate from the polarization and the magnetization of the virtual fermions pairs. Since the transit time of a photon is a statistical process within this model, we expect it to be fluctuating. We discuss experimental tests of this prediction. We also study vacuum saturation effects under high photon density conditions.
△ Less
Submitted 8 November, 2011;
originally announced November 2011.
-
The Pierre Auger Observatory V: Enhancements
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Ongoing and planned enhancements of the Pierre Auger Observatory
Ongoing and planned enhancements of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
The Pierre Auger Observatory IV: Operation and Monitoring
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Technical reports on operations and monitoring of the Pierre Auger Observatory
Technical reports on operations and monitoring of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
Does the speed of light depend upon the vacuum ?
Authors:
M. Urban,
F. Couchot,
X. Sarazin
Abstract:
We propose a quantum model for the vacuum filled of virtual particle pairs. The main originality of this model is to define a density and a life-time of the virtual particles. Compared to the usual QED $(p,E)$ framework, we add here the $(x,t)$ space time parameters. We show how $ε_0$ and $μ_0$ originate from the polarization and the magnetization of these virtual pairs when the vacuum is stressed…
▽ More
We propose a quantum model for the vacuum filled of virtual particle pairs. The main originality of this model is to define a density and a life-time of the virtual particles. Compared to the usual QED $(p,E)$ framework, we add here the $(x,t)$ space time parameters. We show how $ε_0$ and $μ_0$ originate from the polarization and the magnetization of these virtual pairs when the vacuum is stressed by an electrostatic or magnetostatic field respectively. We obtain numerical values very close to the measured values. The exact equalities constraint the free parameters of our vacuum model. Then we show that if we simply model the propagation of a photon in vacuum as a succession of transient captures with virtual pairs, we can derive a finite velocity of the photon with a magnitude close to the measured speed of light $c$. Again this is the occasion to adjust better our vacuum model. Since the transit time of a photon is a statistical process we expect it to be fluctuating and this translates into a fluctuation of $c$ which, if measured, would bring another piece of information on the vacuum.
When submitted to a stress the vacuum may change and this will induce a variation in the electromagnetic constants. We show this to be the case around a gravitational mass. It gives a physical interpretation of a varying vacuum refractive index equivalent to the curved space-time in General Relativity. The known measurements of the deflection of light by a mass, the Shapiro delay and the gravitational redshift do bring constraints on the way inertial masses should depend upon the vacuum.
At last some experimental predictions are proposed.
△ Less
Submitted 20 June, 2011;
originally announced June 2011.
-
Corpuscular description of the speed of light in a homogeneous medium
Authors:
Marcel Urban,
Francois Couchot,
Sylvie Dagoret Campagne,
Xavier Sarazin
Abstract:
We are used to describe the detection of light in terms of particles and its propagation from the source to the detection, by waves. For instance, the slowing down of light in a transparent medium is always explained within the electromagnetic wave framework. We propose to approach that phenomenon through a purely corpuscular description. We find expression for the refractive indices which diffe…
▽ More
We are used to describe the detection of light in terms of particles and its propagation from the source to the detection, by waves. For instance, the slowing down of light in a transparent medium is always explained within the electromagnetic wave framework. We propose to approach that phenomenon through a purely corpuscular description. We find expression for the refractive indices which differ slightly from the usual Maxwell wave approach. We thus compare these expressions against experimental refractive indices and we show that both reproduce well the data. We show also how this corpuscular framework gives a very natural interpretation to the self focusing Kerr effect. Finally an experimental expectation of fluctuation of the speed of light is presented.
△ Less
Submitted 16 June, 2009;
originally announced June 2009.
-
Ramsauer approach to Mie scattering of light on spherical particles
Authors:
K. Louedec,
S. Dagoret-Campagne,
M. Urban
Abstract:
The scattering of an electromagnetic plane wave by a spherical particle was solved analytically by Gustav Mie in 1908. The Mie solution is expressed as a series with very many terms thus obscuring the physical interpretations of the results. The purpose of the paper is to try to illustrate this phenomenon within the Ramsauer framework used in atomic and nuclear physics. We show that although the…
▽ More
The scattering of an electromagnetic plane wave by a spherical particle was solved analytically by Gustav Mie in 1908. The Mie solution is expressed as a series with very many terms thus obscuring the physical interpretations of the results. The purpose of the paper is to try to illustrate this phenomenon within the Ramsauer framework used in atomic and nuclear physics. We show that although the approximations are numerous, the Ramsauer analytical formulae describe fairly well the differential and the total cross sections. This allows us to propose an explanation for the origin of the different structures in the total cross section.
△ Less
Submitted 22 July, 2009; v1 submitted 17 March, 2009;
originally announced March 2009.
-
A particle mechanism for the index of refraction
Authors:
Marcel Urban
Abstract:
We propose to go away from the electromagnetic wave description of light and to explain through a purely corpuscular and neutral approach, the phenomenon of the slowing down of light in a transparent medium. The quantum predictions and ours are compared against experimental refractive indices. In our framework the optical Kerr phenomenon finds a very natural interpretation and its numerical valu…
▽ More
We propose to go away from the electromagnetic wave description of light and to explain through a purely corpuscular and neutral approach, the phenomenon of the slowing down of light in a transparent medium. The quantum predictions and ours are compared against experimental refractive indices. In our framework the optical Kerr phenomenon finds a very natural interpretation and its numerical values are obtained easily
△ Less
Submitted 11 September, 2007;
originally announced September 2007.
-
A Vertex Trigger based on Cylindrical Multiwire Proportional Chambers
Authors:
J. Becker,
K. Bösiger,
L. Lindfeld,
K. Müller,
P. Robmann,
S. Schmitt,
C. Schmitz,
S. Steiner,
U. Straumann,
K. Szeker,
P. Truöl,
M. Urban,
A. Vollhardt,
N. Werner,
D. Baumeister,
S. Löchner,
M. Hildebrandt
Abstract:
The article describes the technical implementation and the performance of the z-vertex trigger (CIP2k), which is part of the H1-experiment at HERA.
The article describes the technical implementation and the performance of the z-vertex trigger (CIP2k), which is part of the H1-experiment at HERA.
△ Less
Submitted 29 December, 2006;
originally announced January 2007.
-
About the connection between vacuum birefringence and the light-light scattering amplitude
Authors:
J. Haissinski,
S. Dagoret,
M. Urban,
F. Zomer
Abstract:
Birefringence phenomena stemming from vacuum polarization are revisited in the framework of coherent scattering. Based on photon-photon scattering, our analysis brings out the direct connection between this process and vacuum birefringence. We show how this procedure can be extended to the Kerr and the Cotton-Mouton birefringences in vacuum, thus providing a unified treatment of various polariza…
▽ More
Birefringence phenomena stemming from vacuum polarization are revisited in the framework of coherent scattering. Based on photon-photon scattering, our analysis brings out the direct connection between this process and vacuum birefringence. We show how this procedure can be extended to the Kerr and the Cotton-Mouton birefringences in vacuum, thus providing a unified treatment of various polarization schemes, including those involving static fields.
△ Less
Submitted 10 November, 2006; v1 submitted 6 October, 2006;
originally announced October 2006.