Showing 1–21 of 21 results for author: Uemura, S

Astronomical Spectroscopy with Skipper CCDs: First Results from a Skipper CCD Focal Plane Prototype at SIFS

Authors: Edgar Marrufo Villalpando, Alex Drlica-Wagner, Brandon Roach, Marco Bonati, Abhishek Bakshi, Julia Campa, Gustavo Cancelo, Braulio Cancino, Claudio R. Chavez, Fernando Chierchie, Juan Estrada, Guillermo Fernandez Moroni, Luciano Fraga, Manuel E. Gaido, Stephen E. Holland, Rachel Hur, Michelle Jonas, Peter Moore, Eduardo Paolini, Andrés A. Plazas Malagón, Leandro Stefanazzi, Javier Tiffenberg, Ken Treptou, Sho Uemura, Neal Wilcer

Abstract: We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astro… ▽ More We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astronomical spectroscopy, i.e., single-sample readout noise < 4.3 e- rms/pixel, the ability to achieve multi-sample readout noise $\ll$ 1 e- rms/pixel, full-well capacities ~40,000-65,000 e-, low dark current and charge transfer inefficiency (~2 x 10$^{-4}$ e-/pixel/s and 3.44 x 10$^{-7}$, respectively), and an absolute quantum efficiency of $\gtrsim$ 80% between 450 nm and 980 nm ($\gtrsim$ 90% between 600 nm and 900 nm). We optimized the readout sequence timing to achieve sub-electron noise (~0.5 e- rms/pixel) in a region of 2k x 4k pixels and photon-counting noise (~0.22 e- rms/pixel) in a region of 220 x 4k pixels, each with a readout time of $\lesssim$ 17 min. We observed two quasars (HB89 1159+123 and QSO J1621-0042) at redshift z ~ 3.5, two high-redshift galaxy clusters (CL J1001+0220 and SPT-CL J2040-4451), an emission line galaxy at z = 0.3239, a candidate member star of the Boötes II ultra-faint dwarf galaxy, and five CALSPEC spectrophotometric standard stars (HD074000, HD60753, HD106252, HD101452, HD200654). We present charge-quantized, photon-counting observations of the quasar HB89 1159+123 and show the detector sensitivity increase for faint spectral features. We demonstrate signal-to-noise performance improvements for SIFS observations in the low-background, readout-noise-dominated regime. We outline scientific studies that will leverage the SIFS-Skipper CCD data and new detector architectures that utilize the Skipper floating gate amplifier with faster readout times. △ Less

Submitted 15 June, 2024; originally announced June 2024.

Comments: 20 pages, 13 figures, 1 table; Proc. SPIE

Report number: FERMILAB-CONF-24-0305-LDRD-PPD

First Measurement of Correlated Charge Noise in Superconducting Qubits at an Underground Facility

Authors: G. Bratrud, S. Lewis, K. Anyang, A. Colón Cesaní, T. Dyson, H. Magoon, D. Sabhari, G. Spahn, G. Wagner, R. Gualtieri, N. A. Kurinsky, R. Linehan, R. McDermott, S. Sussman, D. J. Temples, S. Uemura, C. Bathurst, G. Cancelo, R. Chen, A. Chou, I. Hernandez, M. Hollister, L. Hsu, C. James, K. Kennard , et al. (13 additional authors not shown)

Abstract: We measure space- and time-correlated charge jumps on a four-qubit device, operating 107 meters below the Earth's surface in a low-radiation, cryogenic facility designed for the characterization of low-threshold particle detectors. The rock overburden of this facility reduces the cosmic ray muon flux by over 99% compared to laboratories at sea level. Combined with 4$π$ coverage of a movable lead s… ▽ More We measure space- and time-correlated charge jumps on a four-qubit device, operating 107 meters below the Earth's surface in a low-radiation, cryogenic facility designed for the characterization of low-threshold particle detectors. The rock overburden of this facility reduces the cosmic ray muon flux by over 99% compared to laboratories at sea level. Combined with 4$π$ coverage of a movable lead shield, this facility enables quantifiable control over the flux of ionizing radiation on the qubit device. Long-time-series charge tomography measurements on these weakly charge-sensitive qubits capture discontinuous jumps in the induced charge on the qubit islands, corresponding to the interaction of ionizing radiation with the qubit substrate. The rate of these charge jumps scales with the flux of ionizing radiation on the qubit package, as characterized by a series of independent measurements on another energy-resolving detector operating simultaneously in the same cryostat with the qubits. Using lead shielding, we achieve a minimum charge jump rate of 0.19$^{+0.04}_{-0.03}$ mHz, almost an order of magnitude lower than that measured in surface tests, but a factor of roughly eight higher than expected based on reduction of ambient gammas alone. We operate four qubits for over 22 consecutive hours with zero correlated charge jumps at length scales above three millimeters. △ Less

Submitted 27 June, 2024; v1 submitted 7 May, 2024; originally announced May 2024.

Comments: 12 pages, 6 figures, 4 tables. Minor update to the measured gamma flux ratio (Page 4 and Supplemental Section F) in the LMO detector, from 23 to 20. Typos corrected, references added. Extraneous .tex files have been removed that were causing errors with the "HTML (experimental)" arxiv feature

Report number: FERMILAB-PUB-24-0199-ETD-PPD

Searches for CEνNS and Physics beyond the Standard Model using Skipper-CCDs at CONNIE

Authors: Alexis A. Aguilar-Arevalo, Nicolas Avalos, Xavier Bertou, Carla Bonifazi, Gustavo Cancelo, Brenda A. Cervantes-Vergara, Claudio Chavez, Fernando Chierchie, Gustavo Coelho Corrêa, Juan Carlos D'Olivo, João dos Anjos, Juan Estrada, Guillermo Fernandez Moroni, Aldo R. Fernandes Neto, Richard Ford, Ben Kilminster, Kevin Kuk, Andrew Lathrop, Patrick Lemos, Herman P. Lima Jr., Martin Makler, Katherine Maslova, Franciole Marinho, Jorge Molina, Irina Nasteva , et al. (9 additional authors not shown)

Abstract: The Coherent Neutrino-Nucleus Interaction Experiment (CONNIE) aims to detect the coherent scattering (CE$ν$NS) of reactor antineutrinos off silicon nuclei using thick fully-depleted high-resistivity silicon CCDs. Two Skipper-CCD sensors with sub-electron readout noise capability were installed at the experiment next to the Angra-2 reactor in 2021, making CONNIE the first experiment to employ Skipp… ▽ More The Coherent Neutrino-Nucleus Interaction Experiment (CONNIE) aims to detect the coherent scattering (CE$ν$NS) of reactor antineutrinos off silicon nuclei using thick fully-depleted high-resistivity silicon CCDs. Two Skipper-CCD sensors with sub-electron readout noise capability were installed at the experiment next to the Angra-2 reactor in 2021, making CONNIE the first experiment to employ Skipper-CCDs for reactor neutrino detection. We report on the performance of the Skipper-CCDs, the new data processing and data quality selection techniques and the event selection for CE$ν$NS interactions, which enable CONNIE to reach a record low detection threshold of 15 eV. The data were collected over 300 days in 2021-2022 and correspond to exposures of 14.9 g-days with the reactor-on and 3.5 g-days with the reactor-off. The difference between the reactor-on and off event rates shows no excess and yields upper limits at 95% confidence level for the neutrino interaction rates comparable with previous CONNIE limits from standard CCDs and higher exposures. Searches for new neutrino interactions beyond the Standard Model were performed, yielding an improvement on the previous CONNIE limit on a simplified model with light vector mediators. A first dark matter (DM) search by diurnal modulation was performed by CONNIE and the results represent the best limits on the DM-electron scattering cross-section, obtained by a surface-level experiment. These promising results, obtained using a very small-mass sensor, illustrate the potential of Skipper-CCDs to probe rare neutrino interactions and motivate the plans to increase the detector mass in the near future. △ Less

Submitted 23 March, 2024; originally announced March 2024.

SENSEI: First Direct-Detection Results on sub-GeV Dark Matter from SENSEI at SNOLAB

Authors: SENSEI Collaboration, Prakruth Adari, Itay M. Bloch, Ana M. Botti, Mariano Cababie, Gustavo Cancelo, Brenda A. Cervantes-Vergara, Michael Crisler, Miguel Daal, Ansh Desai, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Stephen E. Holland, Yonatan Kehat, Yaron Korn, Ian Lawson, Steffon Luoma, Aviv Orly, Santiago E. Perez, Dario Rodrigues, Nathan A. Saffold, Silvia Scorza , et al. (12 additional authors not shown)

Abstract: We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. With an exposure of 534.9 gram-days from well-performing sensors, we select events containing 2 to 10 electron-hole pairs. After aggressively masking images to remove backgrounds, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 elect… ▽ More We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. With an exposure of 534.9 gram-days from well-performing sensors, we select events containing 2 to 10 electron-hole pairs. After aggressively masking images to remove backgrounds, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 electrons. The two-electron events are consistent with pileup from one-electron events. Among the 4 three-electron events, 2 appear in pixels that are likely impacted by detector defects, although not strongly enough to trigger our "hot-pixel" mask. We use these data to set world-leading constraints on sub-GeV dark matter interacting with electrons and nuclei. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comments: 5 pages, 2 figures, + Supplemental Materials (5 pages, 5 figures) + References

Report number: YITP-SB-2023-30, FERMILAB-PUB-23-0824-CSAID-PPD

Experimental advances with the QICK (Quantum Instrumentation Control Kit) for superconducting quantum hardware

Authors: Chunyang Ding, Martin Di Federico, Michael Hatridge, Andrew Houck, Sebastien Leger, Jeronimo Martinez, Connie Miao, David I. Schuster, Leandro Stefanazzi, Chris Stoughton, Sara Sussman, Ken Treptow, Sho Uemura, Neal Wilcer, Helin Zhang, Chao Zhou, Gustavo Cancelo

Abstract: The QICK is a standalone open source qubit controller that was first introduced in 2022. In this follow-up work, we present recent experimental use cases that the QICK uniquely enabled for superconducting qubit systems. These include multiplexed signal generation and readout, mixer-free readout, pre-distorted fast flux pulses, and phase-coherent pulses for parametric operations, including high-fid… ▽ More The QICK is a standalone open source qubit controller that was first introduced in 2022. In this follow-up work, we present recent experimental use cases that the QICK uniquely enabled for superconducting qubit systems. These include multiplexed signal generation and readout, mixer-free readout, pre-distorted fast flux pulses, and phase-coherent pulses for parametric operations, including high-fidelity parametric entangling gates. We explain in detail how the QICK was used to enable these experiments. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Dual-sided Charge-Coupled Devices

Authors: Javier Tiffenberg, Daniel Egaña-Ugrinovic, Miguel Sofo Haro, Peizhi Du, Rouven Essig, Guillermo Fernandez-Moroni, Sho Uemura

Abstract: Existing Charge-Coupled Devices (CCDs) operate by detecting either the electrons or holes created in an ionization event. We propose a new type of imager, the Dual-Sided CCD, which collects and measures both charge carriers on opposite sides of the device via a novel dual-buried channel architecture. We show that this dual detection strategy provides exceptional dark-count rejection and enhanced t… ▽ More Existing Charge-Coupled Devices (CCDs) operate by detecting either the electrons or holes created in an ionization event. We propose a new type of imager, the Dual-Sided CCD, which collects and measures both charge carriers on opposite sides of the device via a novel dual-buried channel architecture. We show that this dual detection strategy provides exceptional dark-count rejection and enhanced timing capabilities. These advancements have wide-ranging implications for dark-matter searches, near-IR/optical spectroscopy, and time-domain X-ray astrophysics. △ Less

Submitted 5 June, 2024; v1 submitted 25 July, 2023; originally announced July 2023.

Comments: 12 pages, 12 figures. v2: matches published version. Merged appendices into the main text, added dark matter projected reach plot

Unraveling Fano noise and partial charge collection effect in X-ray spectra below 1 keV

Authors: Dario Rodrigues, Mariano Cababie, Ignacio Gomez Florenciano, Ana Botti, Juan Estrada, Guillermo Fernandez-Moroni, Agustina Magnoni, Javier Tiffenberg, Sho Uemura

Abstract: Fano noise, readout noise, and the partial charge collection (PCC) effect collectively contribute to the degradation of energy spectra in Charge Coupled Devices (CCD) measurements, especially at low energies. In this work, the X-ray produced by the fluorescence of fluorine (677 eV) and aluminum (1486 eV) were recorded using a Skipper-CCD, which enabled the reading noise to be reduced to 0.2 e-. Ba… ▽ More Fano noise, readout noise, and the partial charge collection (PCC) effect collectively contribute to the degradation of energy spectra in Charge Coupled Devices (CCD) measurements, especially at low energies. In this work, the X-ray produced by the fluorescence of fluorine (677 eV) and aluminum (1486 eV) were recorded using a Skipper-CCD, which enabled the reading noise to be reduced to 0.2 e-. Based on an analytical description of photopeak shapes resulting from the convolution of the PCC effect and Fano noise, we achieved a precise characterization of the energy spectra. This description enabled us to disentangle and quantify the contributions from both Fano noise and the PCC effect. As a result, we determined the Fano factor and the electron-hole pair creation energy. Additionally, we estimated the PCC-region of the sensor and, for the first time, experimentally observed the expected skewness of photopeaks at low energies. △ Less

Submitted 17 September, 2023; v1 submitted 15 May, 2023; originally announced May 2023.

Comments: 8 pages, 5 figures

SENSEI: Search for Millicharged Particles produced in the NuMI Beam

Authors: Liron Barak, Itay M. Bloch, Ana M. Botti, Mariano Cababie, Gustavo Cancelo, Luke Chaplinsky, Michael Crisler, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Roni Harnik, Stephen E. Holland, Yaron Korn, Zhen Liu, Sravan Munagavalasa, Aviv Orly, Santiago E. Perez, Ryan Plestid, Dario Rodrigues, Nathan A. Saffold, Silvia Scorza, Aman Singal, Miguel Sofo Haro , et al. (6 additional authors not shown)

Abstract: Millicharged particles appear in several extensions of the Standard Model, but have not yet been detected. These hypothetical particles could be produced by an intense proton beam striking a fixed target. We use data collected in 2020 by the SENSEI experiment in the MINOS cavern at the Fermi National Accelerator Laboratory to search for ultra-relativistic millicharged particles produced in collisi… ▽ More Millicharged particles appear in several extensions of the Standard Model, but have not yet been detected. These hypothetical particles could be produced by an intense proton beam striking a fixed target. We use data collected in 2020 by the SENSEI experiment in the MINOS cavern at the Fermi National Accelerator Laboratory to search for ultra-relativistic millicharged particles produced in collisions of protons in the NuMI beam with a fixed graphite target. The absence of any ionization events with 3 to 6 electrons in the SENSEI data allow us to place world-leading constraints on millicharged particles for masses between 30 MeV to 380 MeV. This work also demonstrates the potential of utilizing low-threshold detectors to investigate new particles in beam-dump experiments, and motivates a future experiment designed specifically for this purpose. △ Less

Submitted 24 May, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Comments: 7 pages, 5 figures

Searching for millicharged particles with 1 kg of Skipper-CCDs using the NuMI beam at Fermilab

Authors: Santiago Perez, Dario Rodrigues, Juan Estrada, Roni Harnik, Zhen Liu, Brenda A. Cervantes-Vergara, Juan Carlos D'Olivo, Ryan D. Plestid, Javier Tiffenberg, Tien-Tien Yu, Alexis Aguilar-Arevalo, Fabricio Alcalde-Bessia, Nicolas Avalos, Oscar Baez, Daniel Baxter, Xavier Bertou, Carla Bonifazi, Ana Botti, Gustavo Cancelo, Nuria Castelló-Mor, Alvaro E. Chavarria, Claudio R. Chavez, Fernando Chierchie, Juan Manuel De Egea, Cyrus Dreyer , et al. (35 additional authors not shown)

Abstract: Oscura is a planned light-dark matter search experiment using Skipper-CCDs with a total active mass of 10 kg. As part of the detector development, the collaboration plans to build the Oscura Integration Test (OIT), an engineering test with 10% of the total mass. Here we discuss the early science opportunities with the OIT to search for millicharged particles (mCPs) using the NuMI beam at Fermilab.… ▽ More Oscura is a planned light-dark matter search experiment using Skipper-CCDs with a total active mass of 10 kg. As part of the detector development, the collaboration plans to build the Oscura Integration Test (OIT), an engineering test with 10% of the total mass. Here we discuss the early science opportunities with the OIT to search for millicharged particles (mCPs) using the NuMI beam at Fermilab. mCPs would be produced at low energies through photon-mediated processes from decays of scalar, pseudoscalar, and vector mesons, or direct Drell-Yan productions. Estimates show that the OIT would be a world-leading probe for mCPs in the MeV mass range. △ Less

Submitted 2 December, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

Comments: 13 pages, 10 figures

Skipper-CCD Sensors for the Oscura Experiment: Requirements and Preliminary Tests

Authors: Brenda A. Cervantes-Vergara, Santiago Perez, Juan Estrada, Ana Botti, Claudio R. Chavez, Fernando Chierchie, Nathan Saffold, Alexis Aguilar-Arevalo, Fabricio Alcalde-Bessia, Nicolás Avalos, Oscar Baez, Daniel Baxter, Xavier Bertou, Carla Bonifazi, Gustavo Cancelo, Nuria Castelló-Mor, Alvaro E. Chavarria, Juan Manuel De Egea, Juan Carlos D'Olivo, Cyrus Dreyer, Alex Drlica-Wagner, Rouven Essig, Ezequiel Estrada, Erez Etzion, Paul Grylls , et al. (30 additional authors not shown)

Abstract: Oscura is a proposed multi-kg skipper-CCD experiment designed for a dark matter (DM) direct detection search that will reach unprecedented sensitivity to sub-GeV DM-electron interactions with its 10 kg detector array. Oscura is planning to operate at SNOLAB with 2070 m overburden, and aims to reach a background goal of less than one event in each electron bin in the 2-10 electron ionization-signal… ▽ More Oscura is a proposed multi-kg skipper-CCD experiment designed for a dark matter (DM) direct detection search that will reach unprecedented sensitivity to sub-GeV DM-electron interactions with its 10 kg detector array. Oscura is planning to operate at SNOLAB with 2070 m overburden, and aims to reach a background goal of less than one event in each electron bin in the 2-10 electron ionization-signal region for the full 30 kg-year exposure, with a radiation background rate of 0.01 dru. In order to achieve this goal, Oscura must address each potential source of background events, including instrumental backgrounds. In this work, we discuss the main instrumental background sources and the strategy to control them, establishing a set of constraints on the sensors' performance parameters. We present results from the tests of the first fabricated Oscura prototype sensors, evaluate their performance in the context of the established constraints and estimate the Oscura instrumental background based on these results. △ Less

Submitted 11 April, 2024; v1 submitted 10 April, 2023; originally announced April 2023.

Journal ref: Journal of Instrumentation, Volume 18, August 2023

First results from a multiplexed and massive instrument with sub-electron noise Skipper-CCDs

Authors: F. Chierchie, C. R. Chavez, M. Sofo Haro, G. Fernandez Moroni, B. A. Cervantes-Vergara, S. Perez, J. Estrada, J. Tiffenberg, S. Uemura, A. Botti

Abstract: We present a new instrument composed of a large number of sub-electron noise Skipper-CCDs operated with a two stage analog multiplexed readout scheme suitable for scaling to thousands of channels. New, thick, $1.35$ Mpix sensors, from a new foundry, are glued into a Multi-Chip Module (MCM) printed circuit board on a ceramic substrate which has 16 sensors each. The instrument, that can hold up-to 1… ▽ More We present a new instrument composed of a large number of sub-electron noise Skipper-CCDs operated with a two stage analog multiplexed readout scheme suitable for scaling to thousands of channels. New, thick, $1.35$ Mpix sensors, from a new foundry, are glued into a Multi-Chip Module (MCM) printed circuit board on a ceramic substrate which has 16 sensors each. The instrument, that can hold up-to 16 MCMs, a total of 256 Skipper-CCD sensors (called a Super-Module with $\approx 130$ grams of active mass and $346$ Mpix), is part of the R$\&$D effort of the OSCURA experiment which will have $\approx 94$ super-modules. Experimental results with $10$ MCMs and $160$ Skipper-CCDs sensors are presented in this paper. This is already the largest ever build instrument with single electron sensitivity CCDs using nondestructive readout, both, in terms of active mass and number of channels. △ Less

Submitted 2 November, 2022; v1 submitted 28 October, 2022; originally announced October 2022.

Comments: Corrected minor typos

EXCESS workshop: Descriptions of rising low-energy spectra

Authors: P. Adari, A. Aguilar-Arevalo, D. Amidei, G. Angloher, E. Armengaud, C. Augier, L. Balogh, S. Banik, D. Baxter, C. Beaufort, G. Beaulieu, V. Belov, Y. Ben Gal, G. Benato, A. Benoît, A. Bento, L. Bergé, A. Bertolini, R. Bhattacharyya, J. Billard, I. M. Bloch, A. Botti, R. Breier, G. Bres, J-. L. Bret , et al. (281 additional authors not shown)

Abstract: Many low-threshold experiments observe sharply rising event rates of yet unknown origins below a few hundred eV, and larger than expected from known backgrounds. Due to the significant impact of this excess on the dark matter or neutrino sensitivity of these experiments, a collective effort has been started to share the knowledge about the individual observations. For this, the EXCESS Workshop was… ▽ More Many low-threshold experiments observe sharply rising event rates of yet unknown origins below a few hundred eV, and larger than expected from known backgrounds. Due to the significant impact of this excess on the dark matter or neutrino sensitivity of these experiments, a collective effort has been started to share the knowledge about the individual observations. For this, the EXCESS Workshop was initiated. In its first iteration in June 2021, ten rare event search collaborations contributed to this initiative via talks and discussions. The contributing collaborations were CONNIE, CRESST, DAMIC, EDELWEISS, MINER, NEWS-G, NUCLEUS, RICOCHET, SENSEI and SuperCDMS. They presented data about their observed energy spectra and known backgrounds together with details about the respective measurements. In this paper, we summarize the presented information and give a comprehensive overview of the similarities and differences between the distinct measurements. The provided data is furthermore publicly available on the workshop's data repository together with a plotting tool for visualization. △ Less

Submitted 4 March, 2022; v1 submitted 10 February, 2022; originally announced February 2022.

Comments: 44 pages, 20 figures; Editors: A. Fuss, M. Kaznacheeva, F. Reindl, F. Wagner; updated copyright statements and funding information

Journal ref: SciPost Phys. Proc. 9, 001 (2022)

Constraints on the electron-hole pair creation energy and Fano factor below 150 eV from Compton scattering in a Skipper-CCD

Authors: A. M. Botti, S. Uemura, G. Fernandez Moroni, L. Barak, M. Cababie, R. Essig, E. Etzion, D. Rodrigues, N. Saffold, M. Sofo Haro, J. Tiffenberg, T. Volansky

Abstract: Fully-depleted thick silicon Skipper-charge-coupled devices (Skipper-CCDs) are an important technology to probe neutrino and light-dark-matter interactions due to their sub-electron read-out noise. However, the successful search for rare neutrino or dark-matter events requires the signal and all backgrounds to be fully characterized. In particular, a measurement of the electron-hole pair creation… ▽ More Fully-depleted thick silicon Skipper-charge-coupled devices (Skipper-CCDs) are an important technology to probe neutrino and light-dark-matter interactions due to their sub-electron read-out noise. However, the successful search for rare neutrino or dark-matter events requires the signal and all backgrounds to be fully characterized. In particular, a measurement of the electron-hole pair creation energy below 150 eV and the Fano factor are necessary for characterizing the dark matter and neutrino signals. Moreover, photons from background radiation may Compton scatter in the silicon bulk, producing events that can mimic a dark matter or neutrino signal. We present a measurement of the Compton spectrum using a Skipper-CCD and a $^{241}$Am source. With these data, we estimate the electron-hole pair-creation energy to be $\left(3.71 \pm 0.08\right)$ eV at 130 K in the energy range between 99.3 eV and 150 eV. By measuring the widths of the steps at 99.3 eV and 150 eV in the Compton spectrum, we introduce a novel technique to measure the Fano factor, setting an upper limit of 0.31 at 90% C.L. These results prove the potential of Skipper-CCDs to characterize the Compton spectrum and to measure precisely the Fano factor and electron-hole pair creation energy below 150 eV. △ Less

Submitted 4 October, 2022; v1 submitted 8 February, 2022; originally announced February 2022.

Report number: FERMILAB-PUB-22-064-PPD-SCD

Analog pile-up circuit technique using a single capacitor for the readout of Skipper-CCD detectors

Authors: Miguel Sofo Haro, Claudio Chavez, Jose Lipovetzky, Fabricio Alcalde Bessia, Gustavo Cancelo, Fernando Chierchie, Juan Estrada, Guillermo Fernandez Moroni, Leandro Stefanazzi, Javier Tiffenberg, Sho Uemura

Abstract: With Skipper-CCD detectors it is possible to take multiple samples of the charge packet collected on each pixel. After averaging the samples, the noise can be extremely reduced allowing the exact counting of electrons per pixel. In this work we present an analog circuit that, with a minimum number of components, applies a double slope integration (DSI), and at the same time, it averages the multip… ▽ More With Skipper-CCD detectors it is possible to take multiple samples of the charge packet collected on each pixel. After averaging the samples, the noise can be extremely reduced allowing the exact counting of electrons per pixel. In this work we present an analog circuit that, with a minimum number of components, applies a double slope integration (DSI), and at the same time, it averages the multiple samples producing at its output the pixel value with sub-electron noise. For this prupose, we introduce the technique of using the DSI integrator capacitor to add the skipper samples. An experimental verification using discrete components is presented, together with an analysis of its noise sources and limitations. After averaging 400 samples it was possible reach a readout noise of 0.2\,$e^-_{RMS}/pix$, comparable to other available readout systems. Due to its simplicity and significant reduction of the sampling requirements, this circuit technique is of particular interest in particle experiments and cameras with a high density of Skipper-CCDs. △ Less

Submitted 20 August, 2021; originally announced August 2021.

SENSEI: Characterization of Single-Electron Events Using a Skipper-CCD

Authors: Liron Barak, Itay M. Bloch, Ana Botti, Mariano Cababie, Gustavo Cancelo, Luke Chaplinsky, Fernando Chierchie, Michael Crisler, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Daniel Gift, Stephen E. Holland, Sravan Munagavalasa, Aviv Orly, Dario Rodrigues, Aman Singal, Miguel Sofo Haro, Leandro Stefanazzi, Javier Tiffenberg, Sho Uemura, Tomer Volansky, Tien-Tien Yu

Abstract: We use a science-grade Skipper Charge Coupled Device (Skipper-CCD) operating in a low-radiation background environment to develop a semi-empirical model that characterizes the origin of single-electron events in CCDs. We identify, separate, and quantify three independent contributions to the single-electron events, which were previously bundled together and classified as "dark counts": dark curren… ▽ More We use a science-grade Skipper Charge Coupled Device (Skipper-CCD) operating in a low-radiation background environment to develop a semi-empirical model that characterizes the origin of single-electron events in CCDs. We identify, separate, and quantify three independent contributions to the single-electron events, which were previously bundled together and classified as "dark counts": dark current, amplifier light, and spurious charge. We measure a dark current, which depends on exposure, of (5.89+-0.77)x10^-4 e-/pix/day, and an unprecedentedly low spurious charge contribution of (1.52+-0.07)x10^-4 e-/pix, which is exposure-independent. In addition, we provide a technique to study events produced by light emitted from the amplifier, which allows the detector's operation to be optimized to minimize this effect to a level below the dark-current contribution. Our accurate characterization of the single-electron events allows one to greatly extend the sensitivity of experiments searching for dark matter or coherent neutrino scattering. Moreover, an accurate understanding of the origin of single-electron events is critical to further progress in ongoing R&D efforts of Skipper and conventional CCDs. △ Less

Submitted 26 January, 2022; v1 submitted 15 June, 2021; originally announced June 2021.

Comments: 9 pages, 6 figures, 4 tables

Journal ref: Phys. Rev. Applied 17, 014022 (2022)

Smart-readout of the Skipper-CCD: Achieving Sub-electron Noise Levels in Regions of Interest

Authors: Fernando Chierchie, Guillermo Fernandez Moroni, Leandro Stefanazzi, Claudio Chavez, Eduardo Paolini, Gustavo Cancelo, Miguel Sofo Haro, Javier Tiffenberg, Juan Estrada, Sho Uemura

Abstract: The skipper CCD is a special type of charge coupled device in which the readout noise can be reduced to sub-electron levels by averaging independent measurements of the same charge. Thus the charge in the pixels can be determined by counting the exact number of electrons. The total readout time is proportional to the number of measurements of the charge in each pixel. For some applications this ti… ▽ More The skipper CCD is a special type of charge coupled device in which the readout noise can be reduced to sub-electron levels by averaging independent measurements of the same charge. Thus the charge in the pixels can be determined by counting the exact number of electrons. The total readout time is proportional to the number of measurements of the charge in each pixel. For some applications this time may be too long; however, researchers usually are interested only on certain region within the matrix of pixels. In this paper we present the development of a smart skipper readout technique that allows the user to specify regions of interest of the CCD matrix where an arbitrary (high) number of measurements of the same charge can taken to obtain the desired noise level, and far less measurements are performed in those regions that are less interesting to the researcher, therefore reducing the total readout time. △ Less

Submitted 18 December, 2020; originally announced December 2020.

Absolute measurement of the Fano factor using a Skipper-CCD

Authors: Dario Rodrigues, Kevin Andersson, Mariano Cababie, Andre Donadon, Ana Botti, Gustavo Cancelo, Juan Estrada, Guillermo Fernandez-Moroni, Ricardo Piegaia, Matias Senger, Miguel Sofo Haro, Leandro Stefanazzi, Javier Tiffenberg, Sho Uemura

Abstract: Skipper-CCD can achieve deep sub-electron readout noise making possible the absolute determination of the exact number of ionized electrons in a large range, from 0 to above 1900 electrons. In this work we present a novel technique that exploits this unique capability to allow self-calibration and the ultimate determination of silicon properties. We performed an absolute measurement of the varianc… ▽ More Skipper-CCD can achieve deep sub-electron readout noise making possible the absolute determination of the exact number of ionized electrons in a large range, from 0 to above 1900 electrons. In this work we present a novel technique that exploits this unique capability to allow self-calibration and the ultimate determination of silicon properties. We performed an absolute measurement of the variance and the mean number of the charge distribution produced by $^{55}$Fe X-rays, getting a Fano factor absolute measurement in Si at 123K and 5.9 keV. A value of 0.119 $\pm$ 0.002 was found and the electron-hole pair creation energy was determined to be (3.749 $\pm$ 0.001) eV. This technology opens the opportunity for direct measurements of the Fano factor at low energies. △ Less

Submitted 6 November, 2020; v1 submitted 23 April, 2020; originally announced April 2020.

Comments: six pages, five figures, three tables, one equation

SENSEI: Direct-Detection Results on sub-GeV Dark Matter from a New Skipper-CCD

Authors: Liron Barak, Itay M. Bloch, Mariano Cababie, Gustavo Cancelo, Luke Chaplinsky, Fernando Chierchie, Michael Crisler, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Daniel Gift, Sravan Munagavalasa, Aviv Orly, Dario Rodrigues, Aman Singal, Miguel Sofo Haro, Leandro Stefanazzi, Javier Tiffenberg, Sho Uemura, Tomer Volansky, Tien-Tien Yu

Abstract: We present the first direct-detection search for eV-to-GeV dark matter using a new ~2-gram high-resistivity Skipper-CCD from a dedicated fabrication batch that was optimized for dark-matter searches. Using 24 days of data acquired in the MINOS cavern at the Fermi National Accelerator Laboratory, we measure the lowest rates in silicon detectors of events containing one, two, three, or four electron… ▽ More We present the first direct-detection search for eV-to-GeV dark matter using a new ~2-gram high-resistivity Skipper-CCD from a dedicated fabrication batch that was optimized for dark-matter searches. Using 24 days of data acquired in the MINOS cavern at the Fermi National Accelerator Laboratory, we measure the lowest rates in silicon detectors of events containing one, two, three, or four electrons, and achieve world-leading sensitivity for a large range of sub-GeV dark matter masses. Data taken with different thicknesses of the detector shield suggest a correlation between the rate of high-energy tracks and the rate of single-electron events previously classified as "dark current." We detail key characteristics of the new Skipper-CCDs, which augur well for the planned construction of the ~100-gram SENSEI experiment at SNOLAB. △ Less

Submitted 2 November, 2020; v1 submitted 23 April, 2020; originally announced April 2020.

Comments: 5 pages, 4 figures, 1 table + Supplemental Materials (5 pages, 8 figures) + References. v3: matches version published in PRL

Report number: YITP-SB-2020-6, FERMILAB-PUB-20-158-AE-E

Journal ref: Phys. Rev. Lett. 125, 171802 (2020)

The SeaQuest Spectrometer at Fermilab

Authors: SeaQuest Collaboration, C. A. Aidala, J. R. Arrington, C. Ayuso, B. M. Bowen, M. L. Bowen, K. L. Bowling, A. W. Brown, C. N. Brown, R. Byrd, R. E. Carlisle, T. Chang, W. -C. Chang, A. Chen, J. -Y. Chen, D. C. Christian, X. Chu, B. P. Dannowitz, M. Daugherity, M. Diefenthaler, J. Dove, C. Durandet, L. El Fassi, E. Erdos, D. M. Fox , et al. (73 additional authors not shown)

Abstract: The SeaQuest spectrometer at Fermilab was designed to detect oppositely-charged pairs of muons (dimuons) produced by interactions between a 120 GeV proton beam and liquid hydrogen, liquid deuterium and solid nuclear targets. The primary physics program uses the Drell-Yan process to probe antiquark distributions in the target nucleon. The spectrometer consists of a target system, two dipole magnets… ▽ More The SeaQuest spectrometer at Fermilab was designed to detect oppositely-charged pairs of muons (dimuons) produced by interactions between a 120 GeV proton beam and liquid hydrogen, liquid deuterium and solid nuclear targets. The primary physics program uses the Drell-Yan process to probe antiquark distributions in the target nucleon. The spectrometer consists of a target system, two dipole magnets and four detector stations. The upstream magnet is a closed-aperture solid iron magnet which also serves as the beam dump, while the second magnet is an open aperture magnet. Each of the detector stations consists of scintillator hodoscopes and a high-resolution tracking device. The FPGA-based trigger compares the hodoscope signals to a set of pre-programmed roads to determine if the event contains oppositely-signed, high-mass muon pairs. △ Less

Submitted 9 February, 2019; v1 submitted 29 June, 2017; originally announced June 2017.

Report number: FERMILAB-PUB-17-209-E

The Heavy Photon Search beamline and its performance

Authors: N. Baltzell, H. Egiyan, M. Ehrhart, C. Field, A. Freyberger, F. -X. Girod, M. Holtrop, J. Jaros, G. Kalicy, T. Maruyama, B. McKinnon, K. Moffeit, T. Nelson, A. Odian, M. Oriunno, R. Paremuzyan, S. Stepanyan, M. Tiefenback, S. Uemura, M. Ungaro, H. Vance

Abstract: The Heavy Photon Search (HPS) is an experiment to search for a hidden sector photon, aka a heavy photon or dark photon, in fixed target electroproduction at the Thomas Jefferson National Accelerator Facility (JLab). The HPS experiment searches for the e$^+$e$^-$ decay of the heavy photon with bump hunt and detached vertex strategies using a compact, large acceptance forward spectrometer, consistin… ▽ More The Heavy Photon Search (HPS) is an experiment to search for a hidden sector photon, aka a heavy photon or dark photon, in fixed target electroproduction at the Thomas Jefferson National Accelerator Facility (JLab). The HPS experiment searches for the e$^+$e$^-$ decay of the heavy photon with bump hunt and detached vertex strategies using a compact, large acceptance forward spectrometer, consisting of a silicon microstrip detector (SVT) for tracking and vertexing, and a PbWO$_4$ electromagnetic calorimeter for energy measurement and fast triggering. To achieve large acceptance and good vertexing resolution, the first layer of silicon detectors is placed just 10 cm downstream of the target with the sensor edges only 500 $μ$m above and below the beam. Placing the SVT in such close proximity to the beam puts stringent requirements on the beam profile and beam position stability. As part of an approved engineering run, HPS took data in 2015 and 2016 at 1.05 GeV and 2.3 GeV beam energies, respectively. This paper describes the beam line and its performance during that data taking. △ Less

Submitted 22 December, 2016; originally announced December 2016.

The Heavy Photon Search Test Detector

Authors: Marco Battaglieri, Sergey Boyarinov, Stephen Bueltmann, Volker Burkert, Andrea Celentano, Gabriel Charles, William Cooper, Chris Cuevas, Natalia Dashyan, Raffaella DeVita, Camille Desnault, Alexandre Deur, Hovanes Egiyan, Latifa Elouadrhiri, Rouven Essig, Vitaliy Fadeyev, Clive Field, Arne Freyberger, Yuri Gershtein, Nerses Gevorgyan, Francois-Xavier Girod, Norman Graf, Mathew Graham, Keith Griffioen, Alexander Grillo , et al. (39 additional authors not shown)

Abstract: The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm th… ▽ More The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm that the trigger rates and occupancies are as expected. This paper describes the HPS Test Run apparatus and readout electronics and its performance. In this setting, a heavy photon can be identified as a narrow peak in the e$^+$e$^-$ invariant mass spectrum, above the trident background or as a narrow invariant mass peak with a decay vertex displaced from the production target, so charged particle tracking and vertexing are needed for its detection. In the HPS Test Run, charged particles are measured with a compact forward silicon microstrip tracker inside a dipole magnet. Electromagnetic showers are detected in a PbW0$_{4}$ crystal calorimeter situated behind the magnet, and are used to trigger the experiment and identify electrons and positrons. Both detectors are placed close to the beam line and split top-bottom. This arrangement provides sensitivity to low-mass heavy photons, allows clear passage of the unscattered beam, and avoids the spray of degraded electrons coming from the target. The discrimination between prompt and displaced e$^+$e$^-$ pairs requires the first layer of silicon sensors be placed only 10~cm downstream of the target. The expected signal is small, and the trident background huge, so the experiment requires very large statistics. Accordingly, the HPS Test Run utilizes high-rate readout and data acquisition electronics and a fast trigger to exploit the essentially 100% duty cycle of the CEBAF accelerator at JLab. △ Less

Submitted 4 June, 2015; v1 submitted 23 June, 2014; originally announced June 2014.

Comments: Revised version to match published version, 16 pages, 18 figures, published in Nuclear Instruments and Methods in Physics Research Section A, editor: Per Hansson Adrian

Report number: SLAC-PUB-15999

Journal ref: Nuclear Inst. and Methods in Physics Research, A Volume 777, 21 March 2015, Pages 91-101, ISSN 0168-9002