-
Measurement of the cluster position resolution of the Belle II Silicon Vertex Detector
Authors:
R. Leboucher,
K. Adamczyk,
L. Aggarwal,
H. Aihara,
T. Aziz,
S. Bacher,
S. Bahinipati,
G. Batignani,
J. Baudot,
P. K. Behera,
S. Bettarini,
T. Bilka,
A. Bozek,
F. Buchsteiner,
G. Casarosa,
L. Corona,
T. Czank,
S. B. Das,
G. Dujany,
C. Finck,
F. Forti,
M. Friedl,
A. Gabrielli,
E. Ganiev,
B. Gobbo
, et al. (56 additional authors not shown)
Abstract:
The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world's highest…
▽ More
The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world's highest instantaneous luminosity. In order to provide the best quality track reconstruction with an efficient pattern recognition and track fit, and to correctly propagate the uncertainty on the hit's position to the track parameters, it is crucial to precisely estimate the resolution of the cluster position measurement. Several methods for estimating the position resolution directly from the data will be discussed.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Precision beam telescope based on SOI pixel sensor technology for electrons in the energy range of sub-GeV to GeV
Authors:
Hisanori Suzuki,
Takumi Omori,
Kazuhiko Hara,
Hiroki Yamauchi,
Miho Yamada,
Toru Tsuboyama,
Ayaki Takeda
Abstract:
We developed a beam telescope system comprising five layers of 300-$μ$m-thick INTPIX4NA monolithic pixel sensors with each pixel size of 17 $μ$m square. The sensors were fabricated using silicon-on-insulator (SOI) technology. The signal-to-noise ratio of 140--230 is realized at a bias voltage of 20~V. The tracker system was tested using a positron beam of 200--822 MeV/c, and various tracking metho…
▽ More
We developed a beam telescope system comprising five layers of 300-$μ$m-thick INTPIX4NA monolithic pixel sensors with each pixel size of 17 $μ$m square. The sensors were fabricated using silicon-on-insulator (SOI) technology. The signal-to-noise ratio of 140--230 is realized at a bias voltage of 20~V. The tracker system was tested using a positron beam of 200--822 MeV/c, and various tracking methods are examined to optimize spatial precision achievable at these energies. The best tracking precision including the precision of the sensor under test itself is 11.04 $\pm$ 0.10 $μ$m for 822-MeV/c positrons for an equidistant sensor spacing of 32 mm. The achieved precision results combined with the intrinsic spatial resolution value obtained for a similar system using 120 GeV protons are used to estimate the tracking performance of electrons in the GeV energy range; a tracking precision of 2.22 $μ$m is evaluated for 5-GeV electrons. The method to estimate the tracking performance is verified using a Geant4-based simulation. The developed high precision tracker system enables to map the detailed performance of the sensors with pixel sizes of $\mathcal{O}$(10 $μ$m), therefore will be a powerful system for development of devices targeting precision position resolutions.
△ Less
Submitted 23 August, 2022; v1 submitted 8 May, 2022;
originally announced May 2022.
-
Measurements of Beam Backgrounds in SuperKEKB Phase 2
Authors:
Zachary J. Liptak,
Antonio Paladino,
Luka Santelj,
Jeffery Schueler,
Slavomira Stefkova,
Hikaru Tanigawa,
Noritsugu Tsuzuki,
Alberto Aloisio,
Patrick Ahlburg,
Philip Bambade,
Giovanni Bassi,
Matthew Barrett,
Jerome Baudot,
Thomas Browder,
Giulia Casarosa,
Giuseppe Cautero,
David Cinabro,
Gilles Claus,
Daniel Cuesta,
Francesco Di Capua,
Salvatore Di Carlo,
John Flanagan,
Ariane Frey,
Bryan Fulsom,
Yoshihiro Funakoshi
, et al. (44 additional authors not shown)
Abstract:
The high design luminosity of the SuperKEKB electron-positron collider will result in challenging levels of beam-induced backgro\ unds in the interaction region. Understanding and mitigating these backgrounds is critical to the success of the Belle~II experi\ ment. We report on the first background measurements performed after roll-in of the Belle II detector, a period known as SuperKE\ KB Phase 2…
▽ More
The high design luminosity of the SuperKEKB electron-positron collider will result in challenging levels of beam-induced backgro\ unds in the interaction region. Understanding and mitigating these backgrounds is critical to the success of the Belle~II experi\ ment. We report on the first background measurements performed after roll-in of the Belle II detector, a period known as SuperKE\ KB Phase 2, utilizing both the BEAST II system of dedicated background detectors and the Belle II detector itself. We also repor\ t on first revisions to the background simulation made in response to our findings. Backgrounds measured include contributions f\ rom synchrotron radiation, beam-gas, Touschek, and injection backgrounds. At the end of Phase 2, single-beam backgrounds origina\ ting from the 4 GeV positron Low Energy Ring (LER) agree reasonably well with simulation, while backgrounds from the 7 GeV elect\ ron High Energy Ring (HER) are approximately one order of magnitude higher than simulation. We extrapolate these backgrounds for\ ward and conclude it is safe to install the Belle II vertex detector.
△ Less
Submitted 29 December, 2021;
originally announced December 2021.
-
The Silicon Vertex Detector of the Belle II Experiment
Authors:
G. Dujany,
K. Adamczyk,
L. Aggarwal,
H. Aihara,
T. Aziz,
S. Bacher,
S. Bahinipati,
G. Batignani,
J. Baudot,
P. K. Behera,
S. Bettarini,
T. Bilka,
A. Bozek,
F. Buchsteiner,
G. Casarosa,
L. Corona,
T. Czank,
S. B. Das,
C. Finck,
F. Forti,
M. Friedl,
A. Gabrielli,
E. Ganiev,
B. Gobbo,
S. Halder
, et al. (56 additional authors not shown)
Abstract:
In 2019 the Belle II experiment started data taking at the asymmetric SuperKEKB collider (KEK, Japan) operating at the Y(4S) resonance. Belle II will search for new physics beyond the Standard Model by collecting an integrated luminosity of 50~ab$^{-1}$. The silicon vertex detector (SVD), consisting of four layers of double-sided silicon strip sensors, is one of the two vertex sub-detectors. The S…
▽ More
In 2019 the Belle II experiment started data taking at the asymmetric SuperKEKB collider (KEK, Japan) operating at the Y(4S) resonance. Belle II will search for new physics beyond the Standard Model by collecting an integrated luminosity of 50~ab$^{-1}$. The silicon vertex detector (SVD), consisting of four layers of double-sided silicon strip sensors, is one of the two vertex sub-detectors. The SVD extrapolates the tracks to the inner pixel detector (PXD) with enough precision to correctly identify hits in the PXD belonging to the track. In addition the SVD has standalone tracking capability and utilizes ionization to enhance particle identification in the low momentum region. The SVD is operating reliably and with high efficiency, despite exposure to the harsh beam background of the highest peak-luminosity collider ever built. High signal-to-noise ratio and hit efficiency have been measured, as well as the spatial resolution; all these quantities show excellent stability over time. Data-simulation agreement on cluster properties has recently been improved through a careful tuning of the simulation. The precise hit-time resolution can be exploited to reject out-of-time hits induced by beam background, which will make the SVD more robust against higher levels of background. During the first three years of running, radiation damage effects on strip noise, sensor currents and depletion voltage have been observed, as well as some coupling capacitor failure due to intense radiation bursts. None of these effects cause significant degradation in the detector performance.
△ Less
Submitted 18 March, 2022; v1 submitted 26 November, 2021;
originally announced November 2021.
-
R&D status of a gas-compressor based two-phase CO2 cooling system for FPCCD Vertex Detector
Authors:
Yasuhiro Sugimoto,
Keisuke Fujii,
Takahiro Fusayasu,
Katsuyu Kasami,
Tohru Tsuboyama
Abstract:
Fine pixel CCD (FPCCD) is one of the candidate sensor technologies for the vertex detector used for experiments at the International Linear Collider (ILC). FPCCD vertex detector is supposed to be cooled down to -40 degree for improvement of radiation immunity. For this purpose, a two-phase CO2 cooling system using a gas compressor for CO2 circulation is being developed at KEK. The status of this R…
▽ More
Fine pixel CCD (FPCCD) is one of the candidate sensor technologies for the vertex detector used for experiments at the International Linear Collider (ILC). FPCCD vertex detector is supposed to be cooled down to -40 degree for improvement of radiation immunity. For this purpose, a two-phase CO2 cooling system using a gas compressor for CO2 circulation is being developed at KEK. The status of this R&D is presented in this article.
△ Less
Submitted 9 March, 2017;
originally announced March 2017.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Development of a multi-pixel hybrid photo-detector with high quantum efficiency and gain
Authors:
M. Suyama,
A. Fukasawa,
J. Haba,
T. Iijima,
S. Iwata,
M. Sakuda,
T. Sumiyoshi,
F. Takasaki,
M. Tanaka,
T. Tsuboyama,
Y. Yamada
Abstract:
A hybrid photo-detector (HPD) consisting of a photocathode and a multi-pixel avalanche diode (MP-AD) was developed a few years ago. Our previous studies showed that its inherent potential for high resolution photon counting could be further enhanced by reducing fluctuations in charge loss in the dead layer at the entrance of the MP-AD. In this paper, we report on the improvement with the newly d…
▽ More
A hybrid photo-detector (HPD) consisting of a photocathode and a multi-pixel avalanche diode (MP-AD) was developed a few years ago. Our previous studies showed that its inherent potential for high resolution photon counting could be further enhanced by reducing fluctuations in charge loss in the dead layer at the entrance of the MP-AD. In this paper, we report on the improvement with the newly developed HPD whose encapsulated MP-AD has a thinner dead layer than before. It is demonstrated that the new HPD has much better energy resolution, which enables clearer counting up to nine photoelectrons. Further enhancement of the photocathode sensitivity of the HPD is also discussed.
△ Less
Submitted 26 February, 2004;
originally announced February 2004.
-
Development of a multi-pixel photon sensor with single-photon sensitivity
Authors:
Motohiro Suyama,
Atsuhito Fukasawa,
Junji Haba,
Toru Iijima,
Seigi Iwata,
Makoto Sakuda,
Takayuki Sumiyoshi,
Fumihiko Takasaki,
Manobu Tanaka,
Toru Tsuboyama,
Yoshikazu Yamada
Abstract:
A multi-pixel photon sensor with single-photon sensitivity has been developed, based on a technology of a hybrid photo-detector (HPD) consisting of a photocathode and a multi-pixel avalanche diode (MP-AD). The developed HPD has a proximity focused structure, where a photocathode and an MP-AD are facing each other with a small gap of 2.5 mm. The MP-AD, which has an effective area of 16x16 mm2 com…
▽ More
A multi-pixel photon sensor with single-photon sensitivity has been developed, based on a technology of a hybrid photo-detector (HPD) consisting of a photocathode and a multi-pixel avalanche diode (MP-AD). The developed HPD has a proximity focused structure, where a photocathode and an MP-AD are facing each other with a small gap of 2.5 mm. The MP-AD, which has an effective area of 16x16 mm2 composed of 8x8 pixels, has been specially designed for the HPD. The gain of the HPD reaches 5x10^4, sufficiently high to detect single photons with a timing resolution better than 100 ps. Number of photoelectrons up to four can be clearly identified in a pulse-height spectrum as distinct peaks, thanks to the low noise characteristics of the HPD. It is also demonstrated that the HPD can be operated with good performance in a magnetic field as high as 1.5 T
△ Less
Submitted 3 December, 2003;
originally announced December 2003.
