Showing 1–19 of 19 results for author: Tricoli, A

Spectroscopic performance of Low-Gain Avalanche Diodes for different types of radiation

Authors: Gabriele Giacomini, Wei Chen, Gabriele D'Amen, Enrico Rossi, Alessandro Tricoli

Abstract: Low-Gain Avalanche Diodes are a type of silicon Avalanche Photo-Diodes originally developed for the fast detection of minimum ionizing particles in high-energy physics experiments. Thanks to their fast timing performance, the Low-Gain Avalanche Diode paradigm enables detectors to accurately measure minimum ionizing particles with a timing resolution of a few tens of picoseconds. Such a performance… ▽ More Low-Gain Avalanche Diodes are a type of silicon Avalanche Photo-Diodes originally developed for the fast detection of minimum ionizing particles in high-energy physics experiments. Thanks to their fast timing performance, the Low-Gain Avalanche Diode paradigm enables detectors to accurately measure minimum ionizing particles with a timing resolution of a few tens of picoseconds. Such a performance is due to a thin substrate and the presence of a moderate signal gain. This internal gain of a few tens is enough to compensate for the reduced charge deposition in the thinner substrate and the noise of fast read-out systems. While Low-Gain Avalanche Diodes are optimized for the detection of minimum ionizing particles for high-energy particle detectors, it is critical to study their performance for the detection of different types of particle, such as X-rays, gamma-rays, or alphas. In this paper, we evaluate the gain of three types of Low-Gain Avalanche Diodes: two devices with different geometries and do** profiles fabricated by Brookhaven National Laboratory, and one fabricated by Hamamatsu Photonics with a different process. Since the gain in LGADs depends on the bias voltage applied to the sensor, pulse-height spectra have been acquired for bias voltages spanning from the depletion voltage up to breakdown voltage. The signal-to-noise ratio of the generated signals and the shape of their spectra allow us to probe the underlying physics of the multiplication process. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Nanowire Array Breath Acetone Sensor for Diabetes Monitoring

Authors: Shiyu Wei, Zhe Li, Krishnan Murugappan, Ziyuan Li, Mykhaylo Lysevych, Kaushal Vora, Hark Hoe Tan, Chennupati Jagadish, Buddini I Karawdeniya, Christopher J Nolan, Antonio Tricoli, Lan Fu

Abstract: Diabetic ketoacidosis (DKA) is a life-threatening acute complication of diabetes in which ketone bodies accumulate in the blood. Breath acetone (a ketone) directly correlates with blood ketones, such that breath acetone monitoring could be used to improve safety in diabetes care. In this work, we report the design and fabrication of a chitosan/Pt/InP nanowire array based chemiresistive acetone sen… ▽ More Diabetic ketoacidosis (DKA) is a life-threatening acute complication of diabetes in which ketone bodies accumulate in the blood. Breath acetone (a ketone) directly correlates with blood ketones, such that breath acetone monitoring could be used to improve safety in diabetes care. In this work, we report the design and fabrication of a chitosan/Pt/InP nanowire array based chemiresistive acetone sensor. By implementing chitosan as a surface functionalization layer and a Pt Schottky contact for efficient charge transfer processes and photovoltaic effect, self-powered, highly selective acetone sensing has been achieved. This sensor has an ultra-wide detection range from sub-ppb to >100,000 ppm levels at room temperature, incorporating the range from healthy individuals (300-800 ppb) to those at high-risk of DKA (> 75 ppm). The nanowire sensor has been further integrated into a handheld breath testing prototype, the Ketowhistle, which can successfully detect different ranges of acetone concentrations in simulated breath. The Ketowhistle demonstrates immediate potential for non-invasive ketone testing and monitoring for persons living with diabetes, in particular for DKA prevention. △ Less

Submitted 1 December, 2023; originally announced December 2023.

First survey of centimeter-scale AC-LGAD strip sensors with a 120 GeV proton beam

Authors: Christopher Madrid, Ryan Heller, Claudio San Martín, Shirsendu Nanda, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele Giacomini, Ohannes Kamer Köseyan, Sergey Los, Cristián Peña, René Rios, Alessandro Tricoli, Si Xie, Zhenyu Ye

Abstract: We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-bas… ▽ More We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. Several design considerations are discussed towards maintaining desirable signal characteristics with increasingly larger electrodes. The resolutions obtained with several prototypes are presented, reaching simultaneous 18 micron and 32 ps resolutions from strips of 1 cm length and 500 micron pitch. With only slight modifications, these sensors would be ideal candidates for a 4D timing layer at the EIC. △ Less

Submitted 20 April, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Signal formation and sharing in AC-LGADs using the ALTIROC 0 front-end chip

Authors: G. D'Amen, W. Chen, C. De La Taille, G. Giacomini, D. Marchand, M. Morenas, C. Munoz Camacho, E. Rossi, N. Seguin-Moreau, L. Serin, A. Tricoli, P. -K. Wang

Abstract: The development of detectors that provide high resolution in four dimensions has attracted wide-spread interest in the scientific community for applications in high-energy physics, nuclear physics, medical imaging, mass spectroscopy as well as quantum information. However, finding a technology capable of fulfilling such aspiration proved to be an arduous task. Among other silicon-based candidates,… ▽ More The development of detectors that provide high resolution in four dimensions has attracted wide-spread interest in the scientific community for applications in high-energy physics, nuclear physics, medical imaging, mass spectroscopy as well as quantum information. However, finding a technology capable of fulfilling such aspiration proved to be an arduous task. Among other silicon-based candidates, the Low-Gain Avalanche Diode (LGAD) has already shown excellent timing performances but proved to be unsuitable for fine pixelization. Therefore, the AC-coupled LGAD (AC-LGAD) approach was introduced to provide high resolution in both time and space, making it a promising candidate for future 4D detectors. However, appropriate readout electronics must be developed to match the sensor's fast-time and fine-pitch capabilities. This is currently a major technological challenge. In this paper, we test AC-LGAD prototypes read out by the fast-time ASIC ALTIROC 0, originally developed for the readout of DC-coupled LGADs for the ATLAS experiment at the HL-LHC. Signal generated by either betas from a $^{90}$Sr source or a focused infra-red laser were analyzed. This paper details the first successful readout of an AC-LGAD sensor using a readout chip. This result will pave the way for the design and construction of a new generation of AC-LGAD-based 4D detectors. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Solid State Detectors and Tracking for Snowmass

Authors: A. Affolder, A. Apresyan, S. Worm, M. Albrow, D. Ally, D. Ambrose, E. Anderssen, N. Apadula, P. Asenov, W. Armstrong, M. Artuso, A. Barbier, P. Barletta, L. Bauerdick, D. Berry, M. Bomben, M. Boscardin, J. Brau, W. Brooks, M. Breidenbach, J. Buckley, V. Cairo, R. Caputo, L. Carpenter, M. Centis-Vignali , et al. (110 additional authors not shown)

Abstract: Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the… ▽ More Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03). △ Less

Submitted 19 October, 2022; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

Monolithic Active Pixel Sensors on CMOS technologies

Authors: Nicole Apadula, Whitney Armstrong, James Brau, Martin Breidenbach, R. Caputo, Gabriella Carinii, Alberto Collu, Marcel Demarteau, Grzegorz Deptuch, Angelo Dragone, Gabriele Giacomini, Carl Grace, Norman Graf, Leo Greiner, Ryan Herbst, Gunther Haller, Manoj Jadhav, Sylvester Joosten, Christopher J. Kenney, C. Kierans, Jihee Kim, Thomas Markiewicz, Yuan Mei, Jessica Metcalfe, Zein-Eddine Meziani , et al. (15 additional authors not shown)

Abstract: Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are… ▽ More Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are a promising technology for high-granularity and light detectors. In this paper we review 1) the requirements on MAPS for trackers and electromagnetic calorimeters (ECal) at future colliders experiments, 2) the ongoing efforts towards dedicated MAPS for the Electron-Ion Collider (EIC) at BNL, for which the EIC Silicon Consortium was already instantiated, and 3) space-born applications for MeV $γ$-ray experiments with MAPS based trackers (AstroPix). △ Less

Submitted 28 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 25 pages, 18 figures, contribution to Snowmass 2021

Testing Lepton Flavor Universality and CKM Unitarity with Rare Pion Decays in the PIONEER experiment

Authors: PIONEER Collaboration, W. Altmannshofer, H. Binney, E. Blucher, D. Bryman, L. Caminada, S. Chen, V. Cirigliano, S. Corrodi, A. Crivellin, S. Cuen-Rochin, A. Di Canto, L. Doria, A. Gaponenko, A. Garcia, L. Gibbons, C. Glaser, M. Escobar Godoy, D. Göldi, S. Gori, T. Gorringe, D. Hertzog, Z. Hodge, M. Hoferichter, S. Ito , et al. (36 additional authors not shown)

Abstract: The physics motivation and the conceptual design of the PIONEER experiment, a next-generation rare pion decay experiment testing lepton flavor universality and CKM unitarity, are described. Phase I of the PIONEER experiment, which was proposed and approved at Paul Scherrer Institut, aims at measuring the charged-pion branching ratio to electrons vs.\ muons, $R_{e/μ}$, 15 times more precisely than… ▽ More The physics motivation and the conceptual design of the PIONEER experiment, a next-generation rare pion decay experiment testing lepton flavor universality and CKM unitarity, are described. Phase I of the PIONEER experiment, which was proposed and approved at Paul Scherrer Institut, aims at measuring the charged-pion branching ratio to electrons vs.\ muons, $R_{e/μ}$, 15 times more precisely than the current experimental result, reaching the precision of the Standard Model (SM) prediction at 1 part in $10^4$. Considering several inconsistencies between the SM predictions and data pointing towards the potential violation of lepton flavor universality, the PIONEER experiment will probe non-SM explanations of these anomalies through sensitivity to quantum effects of new particles up to the PeV mass scale. The later phases of the PIONEER experiment aim at improving the experimental precision of the branching ratio of pion beta decay (BRPB), $π^+\to π^0 e^+ ν(γ)$, currently at $1.036(6)\times10^{-8}$, by a factor of three (Phase II) and an order of magnitude (Phase III). Such precise measurements of BRPB will allow for tests of CKM unitarity in light of the Cabibbo Angle Anomaly and the theoretically cleanest extraction of $|V_{ud}|$ at the 0.02\% level, comparable to the deduction from superallowed beta decays. △ Less

Submitted 10 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021 based on the PIONEER proposal (arXiv:2203.01981)

PIONEER: Studies of Rare Pion Decays

Authors: PIONEER Collaboration, W. Altmannshofer, H. Binney, E. Blucher, D. Bryman, L. Caminada, S. Chen, V. Cirigliano, S. Corrodi, A. Crivellin, S. Cuen-Rochin, A. DiCanto, L. Doria, A. Gaponenko, A. Garcia, L. Gibbons, C. Glaser, M. Escobar Godoy, D. Göldi, S. Gori, T. Gorringe, D. Hertzog, Z. Hodge, M. Hoferichter, S. Ito , et al. (36 additional authors not shown)

Abstract: A next-generation rare pion decay experiment, PIONEER, is strongly motivated by several inconsistencies between Standard Model (SM) predictions and data pointing towards the potential violation of lepton flavor universality. It will probe non-SM explanations of these anomalies through sensitivity to quantum effects of new particles even if their masses are at very high scales. Measurement of the c… ▽ More A next-generation rare pion decay experiment, PIONEER, is strongly motivated by several inconsistencies between Standard Model (SM) predictions and data pointing towards the potential violation of lepton flavor universality. It will probe non-SM explanations of these anomalies through sensitivity to quantum effects of new particles even if their masses are at very high scales. Measurement of the charged-pion branching ratio to electrons vs. muons $R_{e/μ}$ is extremely sensitive to new physics effects. At present, the SM prediction for $R_{e/μ}$ is known to 1 part in $10^4$, which is 15 times more precise than the current experimental result. An experiment reaching the theoretical accuracy will test lepton flavor universality at an unprecedented level, probing mass scales up to the PeV range. Measurement of pion beta decay, $π^+\to π^0 e^+ ν(γ)$, with 3 to 10-fold improvement in sensitivity, will determine $V_{ud}$ in a theoretically pristine manner and test CKM unitarity, which is very important in light of the recently emerged tensions. In addition, various exotic rare decays involving sterile neutrinos and axions will be searched for with unprecedented sensitivity. The experiment design benefits from experience with the recent PIENU and PEN experiments at TRIUMF and the Paul Scherrer Institut (PSI). Excellent energy and time resolutions, greatly increased calorimeter depth, high-speed detector and electronics response, large solid angle coverage, and complete event reconstruction are all critical aspects of the approach. The PIONEER experiment design includes a 3$π$ sr 25 radiation length calorimeter, a segmented low gain avalanche detector stop** target, a positron tracker, and other detectors. Using intense pion beams, and state-of-the-art instrumentation and computational resources, the experiments can be performed at the PSI ring cyclotron. △ Less

Submitted 7 March, 2022; v1 submitted 3 March, 2022; originally announced March 2022.

Characterization of BNL and HPK AC-LGAD sensors with a 120 GeV proton beam

Authors: Ryan Heller, Christopher Madrid, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele D'Amen, Gabriele Giacomini, Ikumi Goya, Kazuhiko Hara, Sayuka Kita, Sergey Los, Adam Molnar, Koji Nakamura, Cristián Peña, Claudio San Martín, Alessandro Tricoli, Tatsuki Ueda, Si Xie

Abstract: We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows deta… ▽ More We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows detailed studies of signal sharing characteristics. These measurements allow us to assess the differences in designs between different manufacturers, and optimize them based on experimental performance. We then study several reconstruction algorithms to optimize position and time resolutions that utilize the signal sharing properties of each sensor. We present a world's first demonstration of silicon sensors in a test beam that simultaneously achieve better than 6-10 micron position and 30 ps time resolution. This represents a substantial improvement to the spatial resolution than would be obtained with binary readout of sensors with similar pitch. △ Less

Submitted 29 March, 2022; v1 submitted 19 January, 2022; originally announced January 2022.

Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report

Authors: R. Abdul Khalek, A. Accardi, J. Adam, D. Adamiak, W. Akers, M. Albaladejo, A. Al-bataineh, M. G. Alexeev, F. Ameli, P. Antonioli, N. Armesto, W. R. Armstrong, M. Arratia, J. Arrington, A. Asaturyan, M. Asai, E. C. Aschenauer, S. Aune, H. Avagyan, C. Ayerbe Gayoso, B. Azmoun, A. Bacchetta, M. D. Baker, F. Barbosa, L. Barion , et al. (390 additional authors not shown)

Abstract: This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon… ▽ More This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter △ Less

Submitted 26 October, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Comments: 902 pages, 415 authors, 151 institutions

Report number: BNL-220990-2021-FORE, JLAB-PHY-21-3198, LA-UR-21-20953

Journal ref: Nucl. Phys. A 1026 (2022) 122447

Novel imaging technique for $α$-particles using a fast optical camera

Authors: Gabriele D'Amen, Michael Keach, Andrei Nomerotski, Peter Svihra, Alessandro Tricoli

Abstract: A new imaging technique for $α$-particles using a fast optical camera focused on a thin scintillator is presented. As $α$-particles interact in a thin layer of LYSO fast scintillator, they produce a localized flash of light. The light is collected with a lens to an intensified optical camera, Tpx3Cam, with single photon sensitivity and excellent spatial & temporal resolutions. The interactions of… ▽ More A new imaging technique for $α$-particles using a fast optical camera focused on a thin scintillator is presented. As $α$-particles interact in a thin layer of LYSO fast scintillator, they produce a localized flash of light. The light is collected with a lens to an intensified optical camera, Tpx3Cam, with single photon sensitivity and excellent spatial & temporal resolutions. The interactions of photons with the camera is reconstructed by means of a custom algorithm, capable of discriminating single photons using time and spatial information. △ Less

Submitted 28 October, 2020; originally announced October 2020.

The ABC130 barrel module prototy** programme for the ATLAS strip tracker

Authors: Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch , et al. (224 additional authors not shown)

Abstract: For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000… ▽ More For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototy** programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototy** program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 82 pages, 66 figures

Journal ref: published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020

Measurements of an AC-LGAD strip sensor with a 120 GeV proton beam

Authors: Artur Apresyan, Wei Chen, Gabriele D'Amen, Karri Folan Di Petrillo, Gabriele Giacomini, Ryan Heller, Hakseong Lee, Sergey Los, Chang-Seong Moon, Alessandro Tricoli

Abstract: The development of detectors that provide high resolution in four dimensions has attracted wide-spread interest in the scientific community for several applications in high-energy physics, nuclear physics, medical imaging, mass spectroscopy as well as quantum information. In addition to high time resolution and thanks to the AC-coupling of the electrodes, LGAD silicon sensors can provide high reso… ▽ More The development of detectors that provide high resolution in four dimensions has attracted wide-spread interest in the scientific community for several applications in high-energy physics, nuclear physics, medical imaging, mass spectroscopy as well as quantum information. In addition to high time resolution and thanks to the AC-coupling of the electrodes, LGAD silicon sensors can provide high resolution in the measurement of spatial coordinates of an incident minimum ionizing particle. Such AC-coupled LGADs, also known as AC-LGADs, are therefore considered as candidates for future detectors to provide 4-dimensional measurements in a single sensing device with 100$\%$ fill factor. This article presents the first characterization of an AC-LGAD sensor with a proton beam of 120 GeV momentum at Fermilab. The sensor consists of strips with 80 $μ$m width, fabricated at Brookhaven National Laboratory. The signal properties, efficiency, spatial, and time resolution are presented. The experimental results show that the time resolution of such an AC-LGAD is compatible to standard LGADs with similar gain, and that AC-LGADs can be segmented with fine pitches as standard strip or pixel detectors. △ Less

Submitted 6 November, 2020; v1 submitted 2 June, 2020; originally announced June 2020.

Journal ref: JINST 15 P09038 (2020)

Beam test results of IHEP-NDL Low Gain Avalanche Detectors(LGAD)

Authors: S. Xiao, S. Alderweireldt, S. Ali, C. Allaire, C. Agapopoulou, N. Atanov, M. K. Ayoub, G. Barone, D. Benchekroun, A. Buzatu, D. Caforio, L. Castillo García, Y. Chan, H. Chen, V. Cindro, L. Ciucu, J. Barreiro Guimarães da Costa, H. Cui, F. Davó Miralles, Y. Davydov, G. d'Amen, C. de la Taille, R. Kiuchi, Y. Fan, A. Falou , et al. (75 additional authors not shown)

Abstract: To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated wi… ▽ More To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated with Novel Device Laboratory (NDL) of Bei**g Normal University and they are now under detailed study. These detectors are tested with $5GeV$ electron beam at DESY. A SiPM detector is chosen as a reference detector to get the timing resolution of LGADs. The fluctuation of time difference between LGAD and SiPM is extracted by fitting with a Gaussian function. Constant fraction discriminator (CFD) method is used to mitigate the effect of time walk. The timing resolution of $41 \pm 1 ps$ and $63 \pm 1 ps$ are obtained for BV60 and BV170 respectively. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Radiation Campaign of HPK Prototype LGAD sensors for the High-Granularity Timing Detector (HGTD)

Authors: X. Shi, M. K. Ayoub, J. Barreiro Guimarães da Costa, H. Cui, R. Kiuchi, Y. Fan, S. Han, Y. Huang, M. **g, Z. Liang, B. Liu, J. Liu, F. Lyu, B. Qi, K. Ran, L. Shan, L. Shi, Y. Tan, K. Wu, S. Xiao, T. Yang, Y. Yang, C. Yu, M. Zhao, X. Zhuang , et al. (52 additional authors not shown)

Abstract: We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the co… ▽ More We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the collected charge and time resolution of the irradiated sensors will be reported for operation at $-30^{\circ}$. △ Less

Submitted 28 April, 2020; originally announced April 2020.

Layout and Performance of HPK Prototype LGAD Sensors for the High-Granularity Timing Detector

Authors: X. Yang, S. Alderweireldt, N. Atanov, M. K. Ayoub, J. Barreiro Guimaraes da Costa, L. Castillo Garcia, H. Chen, S. Christie, V. Cindro, H. Cui, G. D'Amen, Y. Davydov, Y. Y. Fan, Z. Galloway, J. J. Ge, C. Gee, G. Giacomini, E. L. Gkougkousis, C. Grieco, S. Grinstein, J. Grosse-Knetter, S. Guindon, S. Han, A. Howard, Y. P. Huang , et al. (54 additional authors not shown)

Abstract: The High-Granularity Timing Detector is a detector proposed for the ATLAS Phase II upgrade. The detector, based on the Low-Gain Avalanche Detector (LGAD) technology will cover the pseudo-rapidity region of $2.4<|η|<4.0$ with two end caps on each side and a total area of 6.4 $m^2$. The timing performance can be improved by implanting an internal gain layer that can produce signal with a fast rising… ▽ More The High-Granularity Timing Detector is a detector proposed for the ATLAS Phase II upgrade. The detector, based on the Low-Gain Avalanche Detector (LGAD) technology will cover the pseudo-rapidity region of $2.4<|η|<4.0$ with two end caps on each side and a total area of 6.4 $m^2$. The timing performance can be improved by implanting an internal gain layer that can produce signal with a fast rising edge, which improve significantly the signal-to-noise ratio. The required average timing resolution per track for a minimum-ionising particle is 30 ps at the start and 50 ps at the end of the HL-LHC operation. This is achieved with several layers of LGAD. The innermost region of the detector would accumulate a 1 MeV-neutron equivalent fluence up to $2.5 \times 10^{15} cm^{-2}$ before being replaced during the scheduled shutdowns. The addition of this new detector is expected to play an important role in the mitigation of high pile-up at the HL-LHC. The layout and performance of the various versions of LGAD prototypes produced by Hamamatsu (HPK) have been studied by the ATLAS Collaboration. The breakdown voltages, depletion voltages, inter-pad gaps, collected charge as well as the time resolution have been measured and the production yield of large size sensors has been evaluated. △ Less

Submitted 31 March, 2020; originally announced March 2020.

Comments: 17 pages, 20 figures

Performance of a Front End prototype ASIC for picosecond precision time measurements with LGAD sensors

Authors: C. Agapopoulou, S. Blin, A. Blot, L. Castillo Garcia, M. Chmeissani, S. Conforti di Lorenzo, C. de La Taille, P. Dinaucourt, A. Fallou, J. Garcia Rodriguez, V. Gkougkousis, C. Grieco, S. Grinstein, S. Guindon, N. Makovec, G. Martin-Chassard, G. Pellegrini, A. Rummler, S. Sacerdoti, N. Seguin Moreau, L. Serin, A. Tricoli

Abstract: For the High-Luminosity phase of LHC, the ATLAS experiment is proposing the addition of a High Granularity Timing Detector (HGTD) in the forward region to mitigate the effects of the increased pile-up. The chosen detection technology is Low Gain Avalanche Detector (LGAD) silicon sensors that can provide an excellent timing resolution below 50 ps. The front-end read-out ASIC must maintain the perfo… ▽ More For the High-Luminosity phase of LHC, the ATLAS experiment is proposing the addition of a High Granularity Timing Detector (HGTD) in the forward region to mitigate the effects of the increased pile-up. The chosen detection technology is Low Gain Avalanche Detector (LGAD) silicon sensors that can provide an excellent timing resolution below 50 ps. The front-end read-out ASIC must maintain the performance of the sensor, while kee** low power consumption. This paper presents the results on the first prototype of a front-end ASIC, named ALTIROC0, which contains the analog stages (preamplifier and discriminator) of the read-out chip. The ASIC was characterised both alone and as part of a module with a 2$\times$2 LGAD array of 1.1$\times$1.1 mm$^2$ pads bump-bonded to it. The various contributions of the electronics to the time resolution were investigated in test-bench measurements with a calibration setup. Both when the ASIC is alone or with a bump-bonded sensor, the jitter of the ASIC is better than 20 ps for an injected charge of 10 fC. The time walk effect that arises from the different response of the preamplifier for various injected charges can be corrected up to 10 ps using a Time Over Threshold measurement. The combined performance of the ASIC and the LGAD sensor, which was measured during a beam test campaign in October 2018 with pions of 120 GeV energy at the CERN SPS, is around 40 ps for all measured modules. All tested modules show good efficiency and time resolution uniformity. △ Less

Submitted 7 July, 2020; v1 submitted 14 February, 2020; originally announced February 2020.

Comments: 23 pages, 27 figures

Journal ref: 2020 JINST 15 P07007

Fabrication and performance of AC-coupled LGADs

Authors: Gabriele Giacomini, Wei Chen, Gabriele D'Amen, Alessandro Tricoli

Abstract: Detectors that can simultaneously provide fine time and spatial resolution have attracted wide-spread interest for applications in several fields such as high-energy and nuclear physics as well as in low-energy electron detection, photon science, photonics and imaging. Low-Gain Avalanche Diodes (LGADs), being fabricated on thin silicon substrates and featuring a charge gain of up to 100, exhibit e… ▽ More Detectors that can simultaneously provide fine time and spatial resolution have attracted wide-spread interest for applications in several fields such as high-energy and nuclear physics as well as in low-energy electron detection, photon science, photonics and imaging. Low-Gain Avalanche Diodes (LGADs), being fabricated on thin silicon substrates and featuring a charge gain of up to 100, exhibit excellent timing performance. Since pads much larger than the substrate thickness are necessary to achieve a spatially uniform multiplication, a fine pad pixelation is difficult. To overcome this limitation, the AC-coupled LGAD approach was introduced. In this type of device, metal electrodes are placed over an insulator at a fine pitch, and signals are capacitively induced on these electrodes. At Brookhaven National Laboratory, we have designed and fabricated prototypes of AC-coupled LGAD sensors. The performance of small test structures with different particle beams from radioactive sources are shown. △ Less

Submitted 3 September, 2019; v1 submitted 27 June, 2019; originally announced June 2019.

Comments: 12 pages, 10 figures

Journal ref: 2019 JINST14 P09004

Development of a technology for the fabrication of Low-Gain Avalanche Detectors at BNL

Authors: Gabriele Giacomini, Wei Chen, Francesco Lanni, Alessandro Tricoli

Abstract: Low-Gain Avalanche Detectors are gathering interest in the High-Energy Physics community thanks to their fast-timing and radiation-hardness properties, which are planned to be exploited, for example, in timing detectors for the upgrades of the ATLAS and CMS detectors at the High Luminosity LHC. This new technology has also raised interest for its possible application for photon detection in medica… ▽ More Low-Gain Avalanche Detectors are gathering interest in the High-Energy Physics community thanks to their fast-timing and radiation-hardness properties, which are planned to be exploited, for example, in timing detectors for the upgrades of the ATLAS and CMS detectors at the High Luminosity LHC. This new technology has also raised interest for its possible application for photon detection in medical physics, imaging and photon science. The main characteristic of this type of device is a thin and highly-doped layer that provides internal and moderate gain, in the order of 10-20, that enhances the signal amplitude. Furthermore, the thin substrate of a few tens of microns allows fast carrier collection. This paper details on the fabrication technology, specifically developed at Brookhaven National Laboratory for the detection of minimum ionizing particles. The static electrical characterization and the gain measurements on prototypes will be reported, too. △ Less

Submitted 6 May, 2019; v1 submitted 9 November, 2018; originally announced November 2018.

Comments: 13 pages, 9 figures

Journal ref: NIMA 62119 2019