Showing 1–50 of 63 results for author: Tran, H

Attoliter Mie Void Sensing

Authors: Serkan Arslan, Micha Kappel, Adrià Canós Valero, Thu Huong T. Tran, Julian Karst, Philipp Christ, Ulrich Hohenester, Thomas Weiss, Harald Giessen, Mario Hentschel

Abstract: Traditional nanophotonic sensing schemes utilize evanescent fields in dielectric or metallic nanoparticles, which confine far-field radiation in dispersive and lossy media. Apart from the lack of a well-defined sensing volume that can be accompanied by moderate sensitivities, these structures suffer from the generally limited access to the modal field, which is key for sensing performance. Recentl… ▽ More Traditional nanophotonic sensing schemes utilize evanescent fields in dielectric or metallic nanoparticles, which confine far-field radiation in dispersive and lossy media. Apart from the lack of a well-defined sensing volume that can be accompanied by moderate sensitivities, these structures suffer from the generally limited access to the modal field, which is key for sensing performance. Recently, a novel strategy for dielectric nanophotonics has been demonstrated, namely, the resonant confinement of light in air. So-called Mie voids created in high-index dielectric host materials support localized resonant modes with exceptional properties. In particular, due to the confinement in air, these structures benefit from the full access to the modal field inside the void. We utilize these Mie voids for refractive index sensing in single voids with volumes down to 100 attoliters and sensitivities on the order of 400 nm per refractive index unit. Taking the signal-to-noise ratio of our measurements into account, we demonstrate detection of refractive index changes as small as 6.9 x 10-4 in a defined volume of just 850 attoliters. The combination of our Mie void sensor platform with appropriate surface functionalization will even enable specificity to biological or other analytes of interest, as the sensing volumes are on the order of cellular signaling chemicals of single vesicles in cellular synapses. △ Less

Submitted 2 July, 2024; originally announced July 2024.

Shower Separation in Five Dimensions for Highly Granular Calorimeters using Machine Learning

Authors: S. Lai, J. Utehs, A. Wilhahn, M. C. Fouz, O. Bach, E. Brianne, A. Ebrahimi, K. Gadow, P. Göttlicher, O. Hartbrich, D. Heuchel, A. Irles, K. Krüger, J. Kvasnicka, S. Lu, C. Neubüser, A. Provenza, M. Reinecke, F. Sefkow, S. Schuwalow, M. De Silva, Y. Sudo, H. L. Tran, L. Liu, R. Masuda , et al. (26 additional authors not shown)

Abstract: To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular… ▽ More To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL) technological prototype in distinguishing the energy deposited by a single charged and single neutral hadron for Particle Flow. The performance of models trained using only standard spatial and energy and charged track position information from an event was compared to models trained using timing information available from AHCAL, which is expected to improve sensitivity to shower development and, therefore, aid in clustering. Both simulation and experimental data were used to train and test the models and their performances were compared. The best-performing neural network achieved significantly superior event reconstruction when timing information was utilised in training for the case where the charged hadron had more energy than the neutral one, motivating temporally sensitive calorimeters. All models under test were observed to tend to allocate energy deposited by the more energetic of the two showers to the less energetic one. Similar shower reconstruction performance was observed for a model trained on simulation and applied to data and a model trained and applied to data. △ Less

Submitted 28 June, 2024; originally announced July 2024.

Spectral profile of ro-vibrational transitions of HCl broadened by He, Ar and SF6: testing the $β$-correction to the Hartmann-Tran profile and the speed dependent (complex) hard collision model

Authors: T. Le, J. -L. Domenech, N. H. Ngo, H. Tran

Abstract: The $β$-correction to the Hartmann-Tran (HT) profile, recently introduced to model the spectral shape of a molecular transition strongly affected by the Dicke narrowing effect (Konefal et al., JQSRT 242 (2020) 106784), the HT profile (Ngo et al., JQSRT 129 (2013) 89), and the speed dependent (complex) hard collision model (SDcHC, in which the velocity changing collision rate is characterized by a… ▽ More The $β$-correction to the Hartmann-Tran (HT) profile, recently introduced to model the spectral shape of a molecular transition strongly affected by the Dicke narrowing effect (Konefal et al., JQSRT 242 (2020) 106784), the HT profile (Ngo et al., JQSRT 129 (2013) 89), and the speed dependent (complex) hard collision model (SDcHC, in which the velocity changing collision rate is characterized by a complex number) are tested using spectra of two rovibrational lines of HCl. The R(5) and R(9) lines of the fundamental band of HCl broadened by He, Ar and SF$_6$ have been recorded with a difference-frequency laser spectrometer for total pressures ranging from 12 to 930 mbar. These lines, measured in large pressure ranges with different collision-partners provide a meaningful test of the above-mentioned line-shape models. The results confirm that non-Voigt effects are significant for HCl broadened by Ar and SF$_6$ and mainly due to the large influence of the Dicke narrowing effect. For HCl-SF$_6$ and HCl-Ar, especially for the R(9) line, using the $β$-correction together with the HT profile (and with the speed-dependent hard collision model, SDHC) significantly improves the fit residuals while it has no effect on (or tends to deteriorate) the quality of the fit for HCl-He and for the R(5) line of HCl-SF$_6$, for which the influence of velocity changing collisions is smaller. Except for HCl-He, the SDcHC model leads to better quality of fit compared to the HT profile. The results also show that numerical correlations between refined line-shape parameters of the HT profile are important and can lead to ill-determined parameters while they are more properly determined with the SDcHC model. △ Less

Submitted 23 March, 2024; originally announced March 2024.

Comments: Accepted for publication in the Journal of Quantitative Spectroscopy and Radiative Transfer, March 2024

Journal ref: Journal of Quantitative Spectroscopy and Radiative Transfer, Volume 320, 2024, 108977

MP2-based composite extrapolation schemes can predict core-ionization energies for first-row elements with coupled-cluster level accuracy

Authors: Anton Morgunov, Henry K. Tran, Oinam Romesh Meitei, Yu-Che Chien, Troy Van Voorhis

Abstract: X-ray photoelectron spectroscopy (XPS) measures core-electron binding energies (CEBEs) to reveal element-specific insights into chemical environment and bonding. Accurate theoretical CEBE prediction aids XPS interpretation but requires proper modeling of orbital relaxation and electron correlation upon core-ionization. This work systematically investigates basis set selection for extrapolation to… ▽ More X-ray photoelectron spectroscopy (XPS) measures core-electron binding energies (CEBEs) to reveal element-specific insights into chemical environment and bonding. Accurate theoretical CEBE prediction aids XPS interpretation but requires proper modeling of orbital relaxation and electron correlation upon core-ionization. This work systematically investigates basis set selection for extrapolation to the complete basis set (CBS) limit of CEBEs from $Δ$MP2 and $Δ$CC energies across 94 K-edges in diverse organic molecules. We demonstrate that an alternative composite scheme using $Δ$MP2 in a large basis corrected by $Δ$CC-$Δ$MP2 difference in a small basis can quantitatively recover optimally extrapolated $Δ$CC CEBEs within 0.02 eV. Unlike $Δ$CC, MP2 calculations do not suffer from convergence issues and are computationally cheaper, and, thus, the composite $Δ$MP2/$Δ$CC scheme balances accuracy and cost, overcoming limitations of solely using either method. We conclude by providing a comprehensive analysis of the choice of small and large basis sets for the composite schemes and provide practical recommendations for highly accurate (within 0.10-0.15 eV MAE) ab initio prediction of XPS spectra. △ Less

Submitted 10 March, 2024; originally announced March 2024.

Software Compensation for Highly Granular Calorimeters using Machine Learning

Authors: S. Lai, J. Utehs, A. Wilhahn, O. Bach, E. Brianne, A. Ebrahimi, K. Gadow, P. Göttlicher, O. Hartbrich, D. Heuchel, A. Irles, K. Krüger, J. Kvasnicka, S. Lu, C. Neubüser, A. Provenza, M. Reinecke, F. Sefkow, S. Schuwalow, M. De Silva, Y. Sudo, H. L. Tran, E. Buhmann, E. Garutti, S. Huck , et al. (39 additional authors not shown)

Abstract: A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy w… ▽ More A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy weighting and a time-dependent threshold for enhancing energy deposits consistent with the timescale of evaporation neutrons. Additionally, it was observed to learn an energy-weighting indicative of longitudinal leakage correction. In addition, the method produced a linear detector response and outperformed a published control method regarding resolution for every particle energy studied. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Electric Fields in Liquid Water Irradiated with Protons at Ultrahigh Dose Rates

Authors: F. Gobet, P. Barberet, M. -H. Delville, G. Devès, T. Guérin, R. Liénard, H. N. Tran, C. Vecco-Garda, A. Würger, S. Zein, H. Seznec

Abstract: We study the effects of irradiating water with 3 MeV protons at high doses by observing the motion of charged polystyrene beads outside the proton beam. By single-particle tracking, we measure a radial velocity of the order of microns per second. Combining electrokinetic theory with simulations of the beam-generated reaction products and their outward diffusion, we find that the bead motion is due… ▽ More We study the effects of irradiating water with 3 MeV protons at high doses by observing the motion of charged polystyrene beads outside the proton beam. By single-particle tracking, we measure a radial velocity of the order of microns per second. Combining electrokinetic theory with simulations of the beam-generated reaction products and their outward diffusion, we find that the bead motion is due to electrophoresis in the electric field induced by the mobility contrast of cations and anions. This work sheds light on the perturbation of biological systems by high-dose radiations and paves the way for the manipulation of colloid or macromolecular dispersions by radiation-induced diffusiophoresis. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Journal ref: Phys.Rev.Lett. 131, 178001 (2023)

Workshop on a future muon program at FNAL

Authors: S. Corrodi, Y. Oksuzian, A. Edmonds, J. Miller, H. N. Tran, R. Bonventre, D. N. Brown, F. Meot, V. Singh, Y. Kolomensky, S. Tripathy, L. Borrel, M. Bub, B. Echenard, D. G. Hitlin, H. Jafree, S. Middleton, R. Plestid, F. C. Porter, R. Y. Zhu, L. Bottura, E. Pinsard, A. M. Teixeira, C. Carelli, D. Ambrose , et al. (68 additional authors not shown)

Abstract: The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e… ▽ More The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 68 pages, 36 figures

Report number: FERMILAB-CONF-23-464-PPD, CALT-TH-2023-036

May the Force be with You: Unified Force-Centric Pre-Training for 3D Molecular Conformations

Authors: Rui Feng, Qi Zhu, Huan Tran, Binghong Chen, Aubrey Toland, Rampi Ramprasad, Chao Zhang

Abstract: Recent works have shown the promise of learning pre-trained models for 3D molecular representation. However, existing pre-training models focus predominantly on equilibrium data and largely overlook off-equilibrium conformations. It is challenging to extend these methods to off-equilibrium data because their training objective relies on assumptions of conformations being the local energy minima. W… ▽ More Recent works have shown the promise of learning pre-trained models for 3D molecular representation. However, existing pre-training models focus predominantly on equilibrium data and largely overlook off-equilibrium conformations. It is challenging to extend these methods to off-equilibrium data because their training objective relies on assumptions of conformations being the local energy minima. We address this gap by proposing a force-centric pretraining model for 3D molecular conformations covering both equilibrium and off-equilibrium data. For off-equilibrium data, our model learns directly from their atomic forces. For equilibrium data, we introduce zero-force regularization and forced-based denoising techniques to approximate near-equilibrium forces. We obtain a unified pre-trained model for 3D molecular representation with over 15 million diverse conformations. Experiments show that, with our pre-training objective, we increase forces accuracy by around 3 times compared to the un-pre-trained Equivariant Transformer model. By incorporating regularizations on equilibrium data, we solved the problem of unstable MD simulations in vanilla Equivariant Transformers, achieving state-of-the-art simulation performance with 2.45 times faster inference time than NequIP. As a powerful molecular encoder, our pre-trained model achieves on-par performance with state-of-the-art property prediction tasks. △ Less

Submitted 23 August, 2023; originally announced August 2023.

A Schrödinger Equation for Evolutionary Dynamics

Authors: Vi D. Ao, Duy V. Tran, Kien T. Pham, Duc M. Nguyen, Huy D. Tran, Tuan K. Do, Van H. Do, Trung V. Phan

Abstract: We establish an analogy between the Fokker-Planck equation describing evolutionary landscape dynamics and the Schrödinger equation which characterizes quantum mechanical particles, showing how a population with multiple genetic traits evolves analogously to a wavefunction under a multi-dimensional energy potential in imaginary time. Furthermore, we discover within this analogy that the stationary… ▽ More We establish an analogy between the Fokker-Planck equation describing evolutionary landscape dynamics and the Schrödinger equation which characterizes quantum mechanical particles, showing how a population with multiple genetic traits evolves analogously to a wavefunction under a multi-dimensional energy potential in imaginary time. Furthermore, we discover within this analogy that the stationary population distribution on the landscape corresponds exactly to the ground-state wavefunction. This mathematical equivalence grants entry to a wide range of analytical tools developed by the quantum mechanics community, such as the Rayleigh-Ritz variational method and the Rayleigh-Schrödinger perturbation theory, allowing us to not only make reasonable quantitative assessments but also explore fundamental biological inquiries. We demonstrate the effectiveness of these tools by estimating the population success on landscapes where precise answers are elusive, and unveiling the ecological consequences of stress-induced mutagenesis -- a prevalent evolutionary mechanism in pathogenic and neoplastic systems. We show that, even in a unchanging environment, a sharp mutational burst resulting from stress can always be advantageous, while a gradual increase only enhances population size when the number of relevant evolving traits is limited. Our interdisciplinary approach offers novel insights, opening up new avenues for deeper understanding and predictive capability regarding the complex dynamics of evolving populations. △ Less

Submitted 31 August, 2023; v1 submitted 29 July, 2023; originally announced July 2023.

Journal ref: Quantum Rep. 2023, 5(4), 659-682

Vibrational heat-bath configuration interaction with semistochastic perturbation theory using harmonic oscillator or VSCF modals

Authors: Henry K. Tran, Timothy C. Berkelbach

Abstract: Vibrational heat-bath configuration interaction (VHCI) -- a selected configuration interaction technique for vibrational structure theory -- has recently been developed in two independent works [J. Chem. Phys. 154, 074104 (2021); Mol. Phys. 119, e1936250 (2021)], where it was shown to provide accuracy on par with the most accurate vibrational structure methods with a low computational cost. Here,… ▽ More Vibrational heat-bath configuration interaction (VHCI) -- a selected configuration interaction technique for vibrational structure theory -- has recently been developed in two independent works [J. Chem. Phys. 154, 074104 (2021); Mol. Phys. 119, e1936250 (2021)], where it was shown to provide accuracy on par with the most accurate vibrational structure methods with a low computational cost. Here, we eliminate the memory bottleneck of the second-order perturbation theory (PT2) correction using the same (semi)stochastic approach developed previously for electronic structure theory. This allows us to treat, in an unbiased manner, much larger perturbative spaces, which are necessary for high accuracy in large systems. Stochastic errors are easily controlled to be less than 1 cm$^{-1}$. We also report two other developments: (i) we propose a new heat-bath criterion and an associated exact implicit sorting algorithm for potential energy surfaces expressible as a sum of products of one-dimensional potentials; (ii) we formulate VHCI to use a vibrational self-consistent field (VSCF) reference, as opposed to the harmonic oscillator reference configuration used in previous reports. Interestingly, we find that with VSCF, the minor improvements to the accuracy are outweighed by the much higher computational cost associated with the loss of sparsity in the Hamiltonian and integrals transformations needed for matrix element evaluation. △ Less

Submitted 25 July, 2023; originally announced July 2023.

Stress-Induced Mutagenesis Can Further Boost Population Success in Static Ecology

Authors: Kien T. Pham, Duc M. Nguyen, Duy V. Tran, Vi D. Ao, Huy D. Tran, Tuan K. Do, Trung V. Phan

Abstract: We have developed a mathematical model that captures stress-induced mutagenesis, a fundamental aspect of pathogenic and neoplastic evolutionary dynamics, on the fitness landscape with multiple relevant genetic traits as a high-dimensional Euclidean space. In this framework, stress-induced mutagenesis manifests as a heterogeneous diffusion process. We show how increasing mutations, and thus reducin… ▽ More We have developed a mathematical model that captures stress-induced mutagenesis, a fundamental aspect of pathogenic and neoplastic evolutionary dynamics, on the fitness landscape with multiple relevant genetic traits as a high-dimensional Euclidean space. In this framework, stress-induced mutagenesis manifests as a heterogeneous diffusion process. We show how increasing mutations, and thus reducing exploitation, in a static ecology with fixed carrying capacity and maximum growth rates, can paradoxically boost population size. Remarkably, this unexpected biophysical phenomenon applies universally to any number of traits. △ Less

Submitted 16 March, 2023; originally announced March 2023.

Informatics-Driven Selection of Polymers for Fuel-Cell Applications

Authors: Huan Tran, Kuan-Hsuan Shen, Shivank Shukla, Ha-Kyung Kwon, Rampi Ramprasad

Abstract: Modern fuel cell technologies use Nafion as the material of choice for the proton exchange membrane (PEM) and as the binding material (ionomer), used to assemble the catalyst layers of the anode and cathode. These applications demand high proton conductivity as well as other requirements. For example, PEM is expected to block electrons, oxygen, and hydrogen from penetrating and diffusing while the… ▽ More Modern fuel cell technologies use Nafion as the material of choice for the proton exchange membrane (PEM) and as the binding material (ionomer), used to assemble the catalyst layers of the anode and cathode. These applications demand high proton conductivity as well as other requirements. For example, PEM is expected to block electrons, oxygen, and hydrogen from penetrating and diffusing while the anode/cathode ionomer should allow hydrogen/oxygen to move easily, so that they can reach the catalyst nanoparticles. Given some of the well-known limits of Nafion, such as low glass-transition temperature, the community is in the midst of an active search for Nafion replacements. In this work, we present an informatics-based scheme to search large polymer chemical spaces, which includes establishing a list of properties needed for the targeted applications, develo** predictive machine-learning models for these properties, defining a search space, and using the developed models to screen the search space. Using the scheme, we have identified 60 new polymer candidates for PEM, anode ionomer, and cathode ionomer that we hope will be advanced to the next step, i.e., validating the designs through synthesis and testing. The proposed informatics scheme is generic, and can be used to select polymers for multiple applications in the future. △ Less

Submitted 26 December, 2022; originally announced December 2022.

Comments: in press, JPCC

Journal ref: The Journal of Physical Chemistry C 127, 977 (2023)

Differentiable Physics-based Greenhouse Simulation

Authors: Nhat M. Nguyen, Hieu T. Tran, Minh V. Duong, Hanh Bui, Kenneth Tran

Abstract: We present a differentiable greenhouse simulation model based on physical processes whose parameters can be obtained by training from real data. The physics-based simulation model is fully interpretable and is able to do state prediction for both climate and crop dynamics in the greenhouse over very a long time horizon. The model works by constructing a system of linear differential equations and… ▽ More We present a differentiable greenhouse simulation model based on physical processes whose parameters can be obtained by training from real data. The physics-based simulation model is fully interpretable and is able to do state prediction for both climate and crop dynamics in the greenhouse over very a long time horizon. The model works by constructing a system of linear differential equations and solving them to obtain the next state. We propose a procedure to solve the differential equations, handle the problem of missing unobservable states in the data, and train the model efficiently. Our experiment shows the procedure is effective. The model improves significantly after training and can simulate a greenhouse that grows cucumbers accurately. △ Less

Submitted 21 November, 2022; originally announced November 2022.

Comments: Accepted at the Machine Learning and the Physical Sciences workshop, NeurIPS 2022. 7 pages, 2 figures

Simulation of DNA damage using Geant4-DNA: an overview of the "molecularDNA" example application

Authors: Konstantinos P. Chatzipapas, Ngoc Hoang Tran, Milos Dordevic, Sara Zivkovic, Sara Zein, Wook Geun Shin, Dousatsu Sakata, Nathanael Lampe, Jeremy M. C. Brown, Aleksandra Ristic-Fira, Ivan Petrovic, Ioanna Kyriakou, Dimitris Emfietzoglou, Susanna Guatelli, Sébastien Incerti

Abstract: The scientific community shows a great interest in the study of DNA damage induction, DNA damage repair and the biological effects on cells and cellular systems after exposure to ionizing radiation. Several in-silico methods have been proposed so far to study these mechanisms using Monte Carlo simulations. This study outlines a Geant4-DNA example application, named "molecularDNA", publicly release… ▽ More The scientific community shows a great interest in the study of DNA damage induction, DNA damage repair and the biological effects on cells and cellular systems after exposure to ionizing radiation. Several in-silico methods have been proposed so far to study these mechanisms using Monte Carlo simulations. This study outlines a Geant4-DNA example application, named "molecularDNA", publicly released in the 11.1 version of Geant4 (December 2022). It was developed for novice Geant4 users and requires only a basic understanding of scripting languages to get started. The example currently proposes two different DNA-scale geometries of biological targets, namely "cylinders", and the "human cell". This public version is based on a previous prototype and includes new features such as: the adoption of a new approach for the modeling of the chemical stage (IRT-sync), the use of the Standard DNA Damage (SDD) format to describe radiation-induced DNA damage and upgraded computational tools to estimate DNA damage response. Simulation data in terms of single strand break (SSB) and double strand break (DSB) yields were produced using each of these geometries. The results were compared to the literature, to validate the example, producing less than 5 % difference in all cases. △ Less

Submitted 20 March, 2023; v1 submitted 4 October, 2022; originally announced October 2022.

Comments: 20 pages, 8 figures

Report number: hal-03987017

Journal ref: Prec.Radiat.Oncol. (2023) 1- 11

Quantum-Classical Hybrid Information Processing via a Single Quantum System

Authors: Quoc Hoan Tran, Sanjib Ghosh, Kohei Nakajima

Abstract: Current technologies in quantum-based communications bring a new integration of quantum data with classical data for hybrid processing. However, the frameworks of these technologies are restricted to a single classical or quantum task, which limits their flexibility in near-term applications. We propose a quantum reservoir processor to harness quantum dynamics in computational tasks requiring both… ▽ More Current technologies in quantum-based communications bring a new integration of quantum data with classical data for hybrid processing. However, the frameworks of these technologies are restricted to a single classical or quantum task, which limits their flexibility in near-term applications. We propose a quantum reservoir processor to harness quantum dynamics in computational tasks requiring both classical and quantum inputs. This analog processor comprises a network of quantum dots in which quantum data is incident to the network and classical data is encoded via a coherent field exciting the network. We perform a multitasking application of quantum tomography and nonlinear equalization of classical channels. Interestingly, the tomography can be performed in a closed-loop manner via the feedback control of classical data. Therefore, if the classical input comes from a dynamical system, embedding this system in a closed loop enables hybrid processing even if access to the external classical input is interrupted. Finally, we demonstrate preparing quantum depolarizing channels as a novel quantum machine learning technique for quantum data processing. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: Main: 11 pages with 5 figures; Supplementary Material: 18 pages with 15 figures

Quantum Noise-Induced Reservoir Computing

Authors: Tomoyuki Kubota, Yudai Suzuki, Shumpei Kobayashi, Quoc Hoan Tran, Naoki Yamamoto, Kohei Nakajima

Abstract: Quantum computing has been moving from a theoretical phase to practical one, presenting daunting challenges in implementing physical qubits, which are subjected to noises from the surrounding environment. These quantum noises are ubiquitous in quantum devices and generate adverse effects in the quantum computational model, leading to extensive research on their correction and mitigation techniques… ▽ More Quantum computing has been moving from a theoretical phase to practical one, presenting daunting challenges in implementing physical qubits, which are subjected to noises from the surrounding environment. These quantum noises are ubiquitous in quantum devices and generate adverse effects in the quantum computational model, leading to extensive research on their correction and mitigation techniques. But do these quantum noises always provide disadvantages? We tackle this issue by proposing a framework called quantum noise-induced reservoir computing and show that some abstract quantum noise models can induce useful information processing capabilities for temporal input data. We demonstrate this ability in several typical benchmarks and investigate the information processing capacity to clarify the framework's processing mechanism and memory profile. We verified our perspective by implementing the framework in a number of IBM quantum processors and obtained similar characteristic memory profiles with model analyses. As a surprising result, information processing capacity increased with quantum devices' higher noise levels and error rates. Our study opens up a novel path for diverting useful information from quantum computer noises into a more sophisticated information processor. △ Less

Submitted 16 July, 2022; originally announced July 2022.

Single Crystalline 2D Material Nanoribbon Networks for Nanoelectronics

Authors: Muhammad Awais Aslam, Tuan Hoang Tran, Antonio Supina, Olivier Siri, Vincent Meunier, Kenji Watanabe, Takashi Taniguchi, Marko Kralj, Christian Teichert, Evgeniya Sheremet, Raul D. Rodriguez, Aleksandar Matković

Abstract: The last decade has seen a flurry of studies related to graphene nanoribbons owing to their potential applications in the quantum realm. However, little experimental work has been reported towards nanoribbons of other 2D materials due to the absence of synthesis routes. Here, we propose a universal approach to synthesize high-quality networks of nanoribbons from arbitrary 2D materials while mainta… ▽ More The last decade has seen a flurry of studies related to graphene nanoribbons owing to their potential applications in the quantum realm. However, little experimental work has been reported towards nanoribbons of other 2D materials due to the absence of synthesis routes. Here, we propose a universal approach to synthesize high-quality networks of nanoribbons from arbitrary 2D materials while maintaining high crystallinity, sufficient yield, narrow size distribution, and straight-forward device integrability. The wide applicability of this technique is demonstrated by fabricating MoS2, WS2, WSe2, and graphene nanoribbon field effect transistors that inherently do not suffer from interconnection resistances. By relying on self-assembled and self-aligned organic nanostructures as masks, we demonstrate the possibility of controlling the predominant crystallographic direction of the nanoribbon's edges. Electrical characterization shows record mobilities and very high ON currents for various TMDCs despite extreme width scaling. Lastly, we explore decoration of nanoribbon edges with plasmonic particles paving the way towards the development of nanoribbon-based plasmonic sensing and opto-electronic devices. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Measuring vesicle loading with holographic microscopy and bulk light scattering

Authors: Lan Hai Anh Tran, Lauren A. Lowe, Matthew Turner, James Luong, Omar Abdullah A. Khamis, Yaam Deckel, Megan L. Amos, Anna Wang

Abstract: We report efforts to quantify the loading of cell-sized lipid vesicles using in-line digital holographic microscopy. This method does not require fluorescent reporters, fluorescent tracers, or radioactive tracers. A single-color LED light source takes the place of conventional illumination to generate holograms rather than bright field images. By modelling the vesicle's scattering in a microscope… ▽ More We report efforts to quantify the loading of cell-sized lipid vesicles using in-line digital holographic microscopy. This method does not require fluorescent reporters, fluorescent tracers, or radioactive tracers. A single-color LED light source takes the place of conventional illumination to generate holograms rather than bright field images. By modelling the vesicle's scattering in a microscope with a Lorenz-Mie light scattering model, and comparing the results to data holograms, we are able to measure the vesicle's refractive index and thus loading. Performing the same comparison for bulk light scattering measurements enables retrieval of vesicle loading for nanoscale vesicles. △ Less

Submitted 26 April, 2024; v1 submitted 12 April, 2022; originally announced April 2022.

Comments: 7 figures

Model Calibration of the Liquid Mercury Spallation Target using Evolutionary Neural Networks and Sparse Polynomial Expansions

Authors: Majdi I. Radaideh, Hoang Tran, Lianshan Lin, Hao Jiang, Drew Winder, Sarma Gorti, Guannan Zhang, Justin Mach, Sarah Cousineau

Abstract: The mercury constitutive model predicting the strain and stress in the target vessel plays a central role in improving the lifetime prediction and future target designs of the mercury targets at the Spallation Neutron Source (SNS). We leverage the experiment strain data collected over multiple years to improve the mercury constitutive model through a combination of large-scale simulations of the t… ▽ More The mercury constitutive model predicting the strain and stress in the target vessel plays a central role in improving the lifetime prediction and future target designs of the mercury targets at the Spallation Neutron Source (SNS). We leverage the experiment strain data collected over multiple years to improve the mercury constitutive model through a combination of large-scale simulations of the target behavior and the use of machine learning tools for parameter estimation. We present two interdisciplinary approaches for surrogate-based model calibration of expensive simulations using evolutionary neural networks and sparse polynomial expansions. The experiments and results of the two methods show a very good agreement for the solid mechanics simulation of the mercury spallation target. The proposed methods are used to calibrate the tensile cutoff threshold, mercury density, and mercury speed of sound during intense proton pulse experiments. Using strain experimental data from the mercury target sensors, the newly calibrated simulations achieve 7\% average improvement on the signal prediction accuracy and 8\% reduction in mean absolute error compared to previously reported reference parameters, with some sensors experiencing up to 30\% improvement. The proposed calibrated simulations can significantly aid in fatigue analysis to estimate the mercury target lifetime and integrity, which reduces abrupt target failure and saves a tremendous amount of costs. However, an important conclusion from this work points out to a deficiency in the current constitutive model based on the equation of state in capturing the full physics of the spallation reaction. Given that some of the calibrated parameters that show a good agreement with the experimental data can be nonphysical mercury properties, we need a more advanced two-phase flow model to capture bubble dynamics and mercury cavitation. △ Less

Submitted 18 February, 2022; originally announced February 2022.

Comments: 26 pages, 10 figures, 6 tables

Journal ref: Nucl. Instrum. Methods Phys. Res. B 525 (2022) 41-54

A Measurement of Proton, Deuteron, Triton and Alpha Particle Emission after Nuclear Muon Capture on Al, Si and Ti with the AlCap Experiment

Authors: AlCap Collaboration, Andrew Edmonds, John Quirk, Ming-Liang Wong, Damien Alexander, Robert H. Bernstein, Aji Daniel, Eleonora Diociaiuti, Raffaella Donghia, Ewen L. Gillies, Ed V. Hungerford, Peter Kammel, Benjamin E. Krikler, Yoshitaka Kuno, Mark Lancaster, R. Phillip Litchfield, James P. Miller, Anthony Palladino, Jose Repond, Akira Sato, Ivano Sarra, Stefano Roberto Soleti, Vladimir Tishchenko, Nam H. Tran, Yoshi Uchida , et al. (2 additional authors not shown)

Abstract: Heavy charged particles after nuclear muon capture are an important nuclear physics background to the muon-to-electron conversion experiments Mu2e and COMET, which will search for charged lepton flavor violation at an unprecedented level of sensitivity. The AlCap experiment measured the yield and energy spectra of protons, deuterons, tritons, and alpha particles emitted after the nuclear capture o… ▽ More Heavy charged particles after nuclear muon capture are an important nuclear physics background to the muon-to-electron conversion experiments Mu2e and COMET, which will search for charged lepton flavor violation at an unprecedented level of sensitivity. The AlCap experiment measured the yield and energy spectra of protons, deuterons, tritons, and alpha particles emitted after the nuclear capture of muons stopped in Al, Si, and Ti in the low energy range relevant for the muon-to-electron conversion experiments. Individual charged particle types were identified in layered silicon detector packages and their initial energy distributions were unfolded from the observed energy spectra. Detailed information on yields and energy spectra for all observed nuclei are presented in the paper. △ Less

Submitted 1 April, 2022; v1 submitted 19 October, 2021; originally announced October 2021.

Comments: 24 pages, 19 figures

Dynamic instability of individual carbon nanotube growth revealed by in situ homodyne polarization microscopy

Authors: Vladimir Pimonov, Huy-Nam Tran, Léonard Monniello, Saïd Tahir, Thierry Michel, Renaud Podor, Michaël Odorico, Christophe Bichara, Vincent Jourdain

Abstract: Understanding the kinetic selectivity of carbon nanotube growth at the scale of individual nanotubes is essential for the development of high chiral selectivity growth methods. Here we demonstrate that homodyne polarization microscopy can be used for high-throughput imaging of long individual carbon nanotubes under real growth conditions (at ambient pressure, on a substrate), and with sub-second t… ▽ More Understanding the kinetic selectivity of carbon nanotube growth at the scale of individual nanotubes is essential for the development of high chiral selectivity growth methods. Here we demonstrate that homodyne polarization microscopy can be used for high-throughput imaging of long individual carbon nanotubes under real growth conditions (at ambient pressure, on a substrate), and with sub-second time resolution. Our in situ observations on hundreds of individual nanotubes reveal that about half of them grow at a constant rate all along their lifetime while the other half exhibits stochastic changes in growth rates, and switches between growth, pause and shrinkage. Statistical analysis shows that the growth rate of a given nanotube essentially varies between two values, with similar average ratio (~1.7) regardless of whether the rate change is accompanied by a change in chirality. These switches indicate that the nanotube edge or the catalyst nanoparticle fluctuates between different configurations during growth. △ Less

Submitted 4 October, 2021; originally announced October 2021.

Journal ref: Nano Letters, American Chemical Society, 2021

Test of a small prototype of the COMET cylindrical drift chamber

Authors: C. Wu, T. S. Wong, Y. Kuno, M. Moritsu, Y. Nakazawa, A. Sato, H. Sakamoto, N. H. Tran, M. L. Wong, H. Yoshida, T. Yamane, J. Zhang

Abstract: The performance of a small prototype of a cylindrical drift chamber (CDC) used in the COMET Phase-I experiment was studied by using an electron beam. The prototype chamber was constructed with alternating all-stereo wire configuration and operated with the He-iC$_{4}$H$_{10}$ (90/10) gas mixture without a magnetic field. The drift space-time relation, drift velocity, d$E$/d$x$ resolution, hit effi… ▽ More The performance of a small prototype of a cylindrical drift chamber (CDC) used in the COMET Phase-I experiment was studied by using an electron beam. The prototype chamber was constructed with alternating all-stereo wire configuration and operated with the He-iC$_{4}$H$_{10}$ (90/10) gas mixture without a magnetic field. The drift space-time relation, drift velocity, d$E$/d$x$ resolution, hit efficiency, and spatial resolution as a function of distance from the wire were investigated. The average spatial resolution of 150 $μ$m with the hit efficiency of 99% was obtained at applied voltages higher than 1800 V. We have demonstrated that the design and gas mixture of the prototype match the operation of the COMET CDC. △ Less

Submitted 4 September, 2021; v1 submitted 4 June, 2021; originally announced June 2021.

Comments: 22 pages, 14 figures, published in Nucl. Inst. Meth. A

Journal ref: Nucl. Instrum. Methods A 1015 (2021) 165756

Beam dynamics corrections to the Run-1 measurement of the muon anomalous magnetic moment at Fermilab

Authors: T. Albahri, A. Anastasi, K. Badgley, S. Baeßler, I. Bailey, V. A. Baranov, E. Barlas-Yucel, T. Barrett, F. Bedeschi, M. Berz, M. Bhattacharya, H. P. Binney, P. Bloom, J. Bono, E. Bottalico, T. Bowcock, G. Cantatore, R. M. Carey, B. C. K. Casey, D. Cauz, R. Chakraborty, S. P. Chang, A. Chapelain, S. Charity, R. Chislett , et al. (152 additional authors not shown)

Abstract: This paper presents the beam dynamics systematic corrections and their uncertainties for the Run-1 data set of the Fermilab Muon g-2 Experiment. Two corrections to the measured muon precession frequency $ω_a^m$ are associated with well-known effects owing to the use of electrostatic quadrupole (ESQ) vertical focusing in the storage ring. An average vertically oriented motional magnetic field is fe… ▽ More This paper presents the beam dynamics systematic corrections and their uncertainties for the Run-1 data set of the Fermilab Muon g-2 Experiment. Two corrections to the measured muon precession frequency $ω_a^m$ are associated with well-known effects owing to the use of electrostatic quadrupole (ESQ) vertical focusing in the storage ring. An average vertically oriented motional magnetic field is felt by relativistic muons passing transversely through the radial electric field components created by the ESQ system. The correction depends on the stored momentum distribution and the tunes of the ring, which has relatively weak vertical focusing. Vertical betatron motions imply that the muons do not orbit the ring in a plane exactly orthogonal to the vertical magnetic field direction. A correction is necessary to account for an average pitch angle associated with their trajectories. A third small correction is necessary because muons that escape the ring during the storage time are slightly biased in initial spin phase compared to the parent distribution. Finally, because two high-voltage resistors in the ESQ network had longer than designed RC time constants, the vertical and horizontal centroids and envelopes of the stored muon beam drifted slightly, but coherently, during each storage ring fill. This led to the discovery of an important phase-acceptance relationship that requires a correction. The sum of the corrections to $ω_a^m$ is 0.50 $\pm$ 0.09 ppm; the uncertainty is small compared to the 0.43 ppm statistical precision of $ω_a^m$. △ Less

Submitted 23 April, 2021; v1 submitted 7 April, 2021; originally announced April 2021.

Comments: 35 pages, 29 figures. Accepted by Phys. Rev. Accel. Beams

Report number: FERMILAB-PUB-21-133-E

Journal ref: Phys. Rev. Accel. Beams 24, 044002 (2021)

Learning Temporal Quantum Tomography

Authors: Quoc Hoan Tran, Kohei Nakajima

Abstract: Quantifying and verifying the control level in preparing a quantum state are central challenges in building quantum devices. The quantum state is characterized from experimental measurements, using a procedure known as tomography, which requires a vast number of resources. Furthermore, the tomography for a quantum device with temporal processing, which is fundamentally different from the standard… ▽ More Quantifying and verifying the control level in preparing a quantum state are central challenges in building quantum devices. The quantum state is characterized from experimental measurements, using a procedure known as tomography, which requires a vast number of resources. Furthermore, the tomography for a quantum device with temporal processing, which is fundamentally different from the standard tomography, has not been formulated. We develop a practical and approximate tomography method using a recurrent machine learning framework for this intriguing situation. The method is based on repeated quantum interactions between a system called quantum reservoir with a stream of quantum states. Measurement data from the reservoir are connected to a linear readout to train a recurrent relation between quantum channels applied to the input stream. We demonstrate our algorithms for quantum learning tasks followed by the proposal of a quantum short-term memory capacity to evaluate the temporal processing ability of near-term quantum devices. △ Less

Submitted 7 December, 2021; v1 submitted 25 March, 2021; originally announced March 2021.

Comments: Main: 6 pages, 4 figures; Supplementary: 29 pages -> Revised version; Close to the accepted version. The results of tomography task for the quantum switch have been added to the Supplementary Material

Journal ref: Phys. Rev. Lett. 127, 260401 (2021)

Polymer Informatics with Multi-Task Learning

Authors: Christopher Künneth, Arunkumar Chitteth Rajan, Huan Tran, Lihua Chen, Chiho Kim, Rampi Ramprasad

Abstract: Modern data-driven tools are transforming application-specific polymer development cycles. Surrogate models that can be trained to predict the properties of new polymers are becoming commonplace. Nevertheless, these models do not utilize the full breadth of the knowledge available in datasets, which are oftentimes sparse; inherent correlations between different property datasets are disregarded. H… ▽ More Modern data-driven tools are transforming application-specific polymer development cycles. Surrogate models that can be trained to predict the properties of new polymers are becoming commonplace. Nevertheless, these models do not utilize the full breadth of the knowledge available in datasets, which are oftentimes sparse; inherent correlations between different property datasets are disregarded. Here, we demonstrate the potency of multi-task learning approaches that exploit such inherent correlations effectively, particularly when some property dataset sizes are small. Data pertaining to 36 different properties of over $13, 000$ polymers (corresponding to over $23,000$ data points) are coalesced and supplied to deep-learning multi-task architectures. Compared to conventional single-task learning models (that are trained on individual property datasets independently), the multi-task approach is accurate, efficient, scalable, and amenable to transfer learning as more data on the same or different properties become available. Moreover, these models are interpretable. Chemical rules, that explain how certain features control trends in specific property values, emerge from the present work, paving the way for the rational design of application specific polymers meeting desired property or performance objectives. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Electrically injected GeSn lasers with peak wavelength up to 2.7 micrometer at 90 K

Authors: Yiyin Zhou, Solomon Ojo, Yuanhao Miao, Huong Tran, Joshua M. Grant, Grey Abernathy, Sylvester Amoah, Jake Bass, Gregory Salamo, Wei Du, Jifeng Liu, Joe Margetis, John Tolle, Yong-Hang Zhang, Greg Sun, Richard A. Soref, Baohua Li, Shui-Qing Yu

Abstract: GeSn lasers enable monolithic integration of lasers on the Si platform using all-group-IV direct-bandgap materials. Although optically pumped GeSn lasers have made significant progress, the study of the electrically injected lasers has just begun only recently. In this work, we present explorative investigations of electrically injected GeSn heterostructure lasers with various layer thicknesses an… ▽ More GeSn lasers enable monolithic integration of lasers on the Si platform using all-group-IV direct-bandgap materials. Although optically pumped GeSn lasers have made significant progress, the study of the electrically injected lasers has just begun only recently. In this work, we present explorative investigations of electrically injected GeSn heterostructure lasers with various layer thicknesses and material compositions. The cap layer total thickness was varied between 240 and 100 nm. At 10 K, a 240-nm-SiGeSn capped device had a threshold current density Jth = 0.6 kA/cm2 compared to Jth = 1.4 kA/cm2 of a device with 100-nm-SiGeSn cap due to an improved modal overlap with the GeSn gain region. Both devices had a maximum operating temperature Tmax = 100 K. Device with cap layers of Si0.03Ge0.89Sn0.08 and Ge0.95Sn0.05, respectively, were also compared. Due to less effective carrier (electron) confinement, the device with a 240-nm-GeSn cap had a higher threshold Jth = 2.4 kA/cm2 and lower maximum operating temperature Tmax = 90 K, compared to those of the 240-nm-SiGeSn capped device with Jth = 0.6 kA/cm2 and Tmax = 100 K. In the study of the active region material, the device with Ge0.85Sn0.15 active region had a 2.3 times higher Jth and 10 K lower Tmax, compared to the device with Ge0.89Sn0.11 in its active region. This is likely due to higher defect density in Ge0.85Sn0.15 rather than an intrinsic issue. The longest lasing wavelength was measured as 2682 nm at 90 K. The investigations provide guidance to the future structure design of GeSn laser diodes to further improve the performance. △ Less

Submitted 25 September, 2020; originally announced September 2020.

Comments: 21 pages, 5 figures, and 2 tables

Implementing the Independent Reaction Time method in Geant4 for radiation chemistry simulations

Authors: Mathieu Karamitros, Jeremy Brown, Nathanael Lampe, Dousatsu Sakata, Ngoc Hoang Tran, Wook-Guen Shin, Jose Ramos Mendez, Susana Guatelli, Sébastien Incerti, Jay A. LaVerne

Abstract: The Independent Reaction Time method is a computationally efficient Monte-Carlo based approach to simulate the evolution of initially heterogeneously distributed reaction-diffusion systems that has seen wide-scale implementation in the field of radiation chemistry modeling. The method gains its efficiency by preventing multiple calculations steps before a reaction can take place. In this work we o… ▽ More The Independent Reaction Time method is a computationally efficient Monte-Carlo based approach to simulate the evolution of initially heterogeneously distributed reaction-diffusion systems that has seen wide-scale implementation in the field of radiation chemistry modeling. The method gains its efficiency by preventing multiple calculations steps before a reaction can take place. In this work we outline the development and implementation of this method in the Geant4 toolkit to model ionizing radiation induced chemical species in liquid water. The accuracy and validity of these developed chemical models in Geant4 is verified against analytical solutions of well stirred bimolecular systems confined in a fully reflective box. △ Less

Submitted 25 June, 2020; originally announced June 2020.

Evaluating the phase dynamics of coupled oscillators via time-variant topological features

Authors: Kazuha Itabashi, Quoc Hoan Tran, Yoshihiko Hasegawa

Abstract: By characterizing the phase dynamics in coupled oscillators, we gain insights into the fundamental phenomena of complex systems. The collective dynamics in oscillatory systems are often described by order parameters, which are insufficient for identifying more specific behaviors. To improve this situation, we propose a topological approach that constructs the quantitative features describing the p… ▽ More By characterizing the phase dynamics in coupled oscillators, we gain insights into the fundamental phenomena of complex systems. The collective dynamics in oscillatory systems are often described by order parameters, which are insufficient for identifying more specific behaviors. To improve this situation, we propose a topological approach that constructs the quantitative features describing the phase evolution of oscillators. Here, the phase data are mapped into a high-dimensional space at each time, and the topological features describing the shape of the data are subsequently extracted from the mapped points. These features are extended to time-variant topological features by adding the evolution time as an extra dimension in the topological feature space. The time-variant features provide crucial insights into the evolution of phase dynamics. Combining these features with the kernel method, we characterize the multi-clustered synchronized dynamics during the early evolution stages. Finally, we demonstrate that our method can qualitatively explain chimera states. The experimental results confirmed the superiority of our method over those based on order parameters, especially when the available data are limited to the early-stage dynamics. △ Less

Submitted 9 February, 2021; v1 submitted 7 May, 2020; originally announced May 2020.

Comments: 13 pages, 8 figures

Journal ref: Phys. Rev. E 103, 032207 (2021)

Electrically injected GeSn lasers on Si operating up to 100 K

Authors: Yiyin Zhou, Yuanhao Miao, Solomon Ojo, Huong Tran, Grey Abernathy, Joshua M. Grant, Sylvester Amoah, Gregory Salamo, Wei Du, Jifeng Liu, Joe Margetis, John Tolle, Yong-Hang Zhang, Greg Sun, Richard A. Soref, Baohua Li, Shui-Qing Yu

Abstract: The significant progress of GeSn material development has enabled a feasible solution to the long-desired monolithically integrated lasers on the Si platform. While there are many reports focused on optically pumped lasers, GeSn lasers through electrical injection have not been experimentally achieved yet. In this work, we report the first demonstration of electrically injected GeSn lasers on Si.… ▽ More The significant progress of GeSn material development has enabled a feasible solution to the long-desired monolithically integrated lasers on the Si platform. While there are many reports focused on optically pumped lasers, GeSn lasers through electrical injection have not been experimentally achieved yet. In this work, we report the first demonstration of electrically injected GeSn lasers on Si. A GeSn/SiGeSn heterostructure diode grown on a Si substrate was fabricated into ridge waveguide laser devices and tested under pulsed conditions. Special considerations were given for the structure design to ensure effective carrier confinement and optical confinement that lead to lasing. Lasing was observed at temperatures from 10 to 100 K with emission peaks at around 2300 nm. The minimum threshold of 598 A/cm2 was recorded at 10 K and the threshold increased to 842 A/cm2 at 77 K. The spectral linewidth of a single peak was measured as small as 0.13 nm (0.06 meV). The maximum characteristic temperature was extracted as 99 K over the temperature range of 10-77 K. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Risk-Aware Energy Scheduling for Edge Computing with Microgrid: A Multi-Agent Deep Reinforcement Learning Approach

Authors: Md. Shirajum Munir, Sarder Fakhrul Abedin, Nguyen H. Tran, Zhu Han, Eui-Nam Huh, Choong Seon Hong

Abstract: In recent years, multi-access edge computing (MEC) is a key enabler for handling the massive expansion of Internet of Things (IoT) applications and services. However, energy consumption of a MEC network depends on volatile tasks that induces risk for energy demand estimations. As an energy supplier, a microgrid can facilitate seamless energy supply. However, the risk associated with energy supply… ▽ More In recent years, multi-access edge computing (MEC) is a key enabler for handling the massive expansion of Internet of Things (IoT) applications and services. However, energy consumption of a MEC network depends on volatile tasks that induces risk for energy demand estimations. As an energy supplier, a microgrid can facilitate seamless energy supply. However, the risk associated with energy supply is also increased due to unpredictable energy generation from renewable and non-renewable sources. Especially, the risk of energy shortfall is involved with uncertainties in both energy consumption and generation. In this paper, we study a risk-aware energy scheduling problem for a microgrid-powered MEC network. First, we formulate an optimization problem considering the conditional value-at-risk (CVaR) measurement for both energy consumption and generation, where the objective is to minimize the expected residual of scheduled energy for the MEC networks and we show this problem is an NP-hard problem. Second, we analyze our formulated problem using a multi-agent stochastic game that ensures the joint policy Nash equilibrium, and show the convergence of the proposed model. Third, we derive the solution by applying a multi-agent deep reinforcement learning (MADRL)-based asynchronous advantage actor-critic (A3C) algorithm with shared neural networks. This method mitigates the curse of dimensionality of the state space and chooses the best policy among the agents for the proposed problem. Finally, the experimental results establish a significant performance gain by considering CVaR for high accuracy energy scheduling of the proposed model than both the single and random agent models. △ Less

Submitted 5 January, 2021; v1 submitted 20 February, 2020; originally announced March 2020.

Comments: Accepted Article BY IEEE Transactions on Network and Service Management, DOI: 10.1109/TNSM.2021.3049381

Machine Learning Models for the Lattice Thermal Conductivity Prediction of Inorganic Materials

Authors: Lihua Chen, Huan Tran, Rohit Batra, Chiho Kim, Rampi Ramprasad

Abstract: The lattice thermal conductivity ($κ_{\rm L} $) is a critical property of thermoelectrics, thermal barrier coating materials and semiconductors. While accurate empirical measurements of $κ_{\rm L} $ are extremely challenging, it is usually approximated through computational approaches, such as semi-empirical models, Green-Kubo formalism coupled with molecular dynamics simulations, and first-princi… ▽ More The lattice thermal conductivity ($κ_{\rm L} $) is a critical property of thermoelectrics, thermal barrier coating materials and semiconductors. While accurate empirical measurements of $κ_{\rm L} $ are extremely challenging, it is usually approximated through computational approaches, such as semi-empirical models, Green-Kubo formalism coupled with molecular dynamics simulations, and first-principles based methods. However, these theoretical methods are not only limited in terms of their accuracy, but sometimes become computationally intractable owing to their cost. Thus, in this work, we build a machine learning (ML)-based model to accurately and instantly predict $κ_{\rm L}$ of inorganic materials, using a benchmark data set of experimentally measured $κ_{\rm L} $ of about 100 inorganic solids. We use advanced and universal feature engineering techniques along with the Gaussian process regression algorithm, and compare the performance of our ML model with past theoretical works. The trained ML model is not only helpful for rational design and screening of novel materials, but we also identify key features governing the thermal transport behavior in non-metals. △ Less

Submitted 4 August, 2019; v1 submitted 14 June, 2019; originally announced June 2019.

Si-based GeSn photodetectors towards mid-infrared imaging applications

Authors: Huong Tran, Thach Pham, Joe Margetis, Yiyin Zhou, Wei Dou, Perry C. Grant, Joshua M. Grant, Sattar Alkabi, Greg Sun, Richard A. Soref, John Tolle, Yong-Hang Zhang, Wei Du, Baohua Li, Mansour Mortazavi, Shui-Qing Yu

Abstract: This paper reports a comprehensive study of Si-based GeSn mid-infrared photodetectors, which includes: 1) the demonstration of a set of photoconductors with Sn compositions ranging from 10.5% to 22.3%, showing the cut-off wavelength has been extended to 3.65 um. The measured maximum D* of 1.1x10^10 cmHz^(1/2)W(-1) is comparable to that of commercial extended-InGaAs detectors; 2) the development of… ▽ More This paper reports a comprehensive study of Si-based GeSn mid-infrared photodetectors, which includes: 1) the demonstration of a set of photoconductors with Sn compositions ranging from 10.5% to 22.3%, showing the cut-off wavelength has been extended to 3.65 um. The measured maximum D* of 1.1x10^10 cmHz^(1/2)W(-1) is comparable to that of commercial extended-InGaAs detectors; 2) the development of surface passivation technique on photodiode based on in-depth analysis of dark current mechanism, effectively reducing the dark current. Moreover, mid-infrared images were obtained using GeSn photodetectors, showing the comparable image quality with that acquired by using commercial PbSe detectors. △ Less

Submitted 6 June, 2019; originally announced June 2019.

Comments: 25 pages, 8 figures

The CO2-broadened H2O continuum in the 100-1500 cm-1 region. Measurements, predictions and empirical model

Authors: Ha Tran, Martin Turbet, Simon Hanoufa, Xavier Landsheere, Pascale Chelin, Qiancheng Ma, Jean-Michel Hartmann

Abstract: Transmission spectra of H$_2$O+CO$_2$ mixtures have been recorded, at 296, 325 and 366 K, for various pressures and mixture compositions using two experimental setups. Their analysis enables to retrieve values of the 'continuum' absorption by the CO$_2$-broadened H$_2$O line wings between 100 and 1500 cm$^{-1}$. The results are in good agreement with those, around 1300 cm$^{-1}$, of the single pre… ▽ More Transmission spectra of H$_2$O+CO$_2$ mixtures have been recorded, at 296, 325 and 366 K, for various pressures and mixture compositions using two experimental setups. Their analysis enables to retrieve values of the 'continuum' absorption by the CO$_2$-broadened H$_2$O line wings between 100 and 1500 cm$^{-1}$. The results are in good agreement with those, around 1300 cm$^{-1}$, of the single previous experimental study available. Comparisons are also made with direct predictions based on line-shape correction factors $χ$ calculated, almost thirty years ago, using a quasistatic approach and an input H$_2$O-CO$_2$ intermolecular potential. They show that this model quite nicely predicts, with slightly overestimated values, the continuum over a spectral range where it varies by more than three orders of magnitude. An empirical correction is proposed, based on the experimental data, which should be useful for radiative transfer and climate studies in CO$_2$ rich planetary atmospheres. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: Accepted for publication in the Journal of Quantitative Spectroscopy & Radiative Transfer (JQSRT); 11 pages and 3 figures

Characterisation of different stages of hadronic showers using the CALICE Si-W ECAL physics prototype

Authors: CALICE Collaboration, G. Eigen, T. Price, N. K. Watson, A. Winter, Y. Do, A. Khan, D. Kim, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, J. Apostolakis, J. Giraud, D. Grondin, J. -Y. Hostachy, O. Bach, V. Bocharnikov, E. Brianne , et al. (81 additional authors not shown)

Abstract: A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorith… ▽ More A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorithm that reconstructs tracks within hadronic showers in a calorimeter in the absence of a magnetic field. The principle of carrying out detector monitoring and calibration using secondary tracks is also demonstrated. △ Less

Submitted 18 September, 2019; v1 submitted 16 February, 2019; originally announced February 2019.

Comments: 21 pages, 21 figures

Report number: CALICE-PUB-2019-002

Journal ref: Nucl.Instrum.Meth. A937 (2019) 41-52

Reduction of coherent betatron oscillations in a muon g-2 storage ring experiment using RF fields

Authors: On Kim, SeungPyo Chang, Jihoon Choi, Selcuk Haciomeroglu, Young-Im Kim, Yuri F. Orlov, Yannis K. Semertzidis, Meghna Bhattacharya, Jason D. Crnkovic, Sudeshna Ganguly, Manolis Kargiantoulakis, Soohyung Lee, William M. Morse, Hogan Nguyen, B. Lee Roberts, Vladimir Tishchenko, Nam H. Tran, Esra Barlas Yucel

Abstract: This work demonstrates that two systematic errors, coherent betatron oscillations (CBO) and muon losses can be reduced through application of radio frequency (RF) electric fields, which ultimately increases the sensitivity of the muon $g-2$ experiments. As the ensemble of polarized muons goes around a weak focusing storage ring, their spin precesses, and when they decay through the weak interactio… ▽ More This work demonstrates that two systematic errors, coherent betatron oscillations (CBO) and muon losses can be reduced through application of radio frequency (RF) electric fields, which ultimately increases the sensitivity of the muon $g-2$ experiments. As the ensemble of polarized muons goes around a weak focusing storage ring, their spin precesses, and when they decay through the weak interaction, $μ^+ \rightarrow e^+ ν_e \bar{ν_μ}$, the decay positrons are detected by electromagnetic calorimeters. In addition to the expected exponential decay in the positron time spectrum, the weak decay asymmetry causes a modulation in the number of positrons in a selected energy range at the difference frequency between the spin and cyclotron frequencies, $ω_\text{a}$. This frequency is directly proportional to the magnetic anomaly $a_μ=(g-2)/2$, where $g$ is the g-factor of the muon, which is slightly greater than 2. The detector acceptance depends on the radial position of the muon decay, so the CBO of the muon bunch following injection into the storage ring modulate the measured muon signal with the frequency $ω_\text{CBO}$. In addition, the muon populations at the edge of the beam hit the walls of the vacuum chamber before decaying, which also affects the signal. Thus, reduction of CBO and unwanted muon loss increases the $a_μ$ measurement sensitivity. Numerical and experimental studies with RF electric fields yield more than a magnitude reduction of the CBO, with muon losses comparable to the conventional method. △ Less

Submitted 26 February, 2020; v1 submitted 8 February, 2019; originally announced February 2019.

Comments: 14 pages, 25 figures

Journal ref: New J. Phys. 22 063002 (2020)

SpinDoctor: a Matlab toolbox for diffusion MRI simulation

Authors: **g-Rebecca Li, Van-Dang Nguyen, Try Nguyen Tran, Jan Valdman, Bang Cong Trang, Khieu Van Nguyen, Vu Duc Thach Son, Hoang An Tran, Hoang Trong An Tran, Thi Minh Phuong Nguyen

Abstract: The complex transverse water proton magnetization subject to diffusion-encoding magnetic field gradient pulses in a heterogeneous medium can be modeled by the multiple compartment Bloch-Torrey partial differential equation (BTPDE). A mathematical model for the time-dependent apparent diffusion coefficient (ADC), called the H-ADC model, was obtained recently using homogenization techniques on the B… ▽ More The complex transverse water proton magnetization subject to diffusion-encoding magnetic field gradient pulses in a heterogeneous medium can be modeled by the multiple compartment Bloch-Torrey partial differential equation (BTPDE). A mathematical model for the time-dependent apparent diffusion coefficient (ADC), called the H-ADC model, was obtained recently using homogenization techniques on the BTPDE. Under the assumption of negligible water exchange between compartments, the H-ADC model produces the ADC of a diffusion medium from the solution of a diffusion equation (DE) subject to a time-dependent Neumann boundary condition. This paper describes a publicly available Matlab toolbox called SpinDoctor that can be used 1) to solve the BTPDE to obtain the dMRI signal (the toolbox provides a way of robustly fitting the dMRI signal to obtain the fitted ADC); 2) to solve the DE of the H-ADC model to obtain the ADC; 3) a short-time approximation formula for the ADC is also included in the toolbox for comparison with the simulated ADC. The PDEs are solved by P 1 finite elements combined with build-in Matlab routines for solving ordinary differential equations. The finite element mesh generation is performed using an external package called Tetgen that is included in the toolbox. SpinDoctor provides built-in options of including 1) spherical cells with a nucleus; 2) cylindrical cells with a myelin layer; 3) an extra-cellular space (ECS) enclosed either a) in a box or b) in a tight wrap** around the cells; 4) deformation of canonical cells by bending and twisting. 5) permeable membranes for the BT-PDE (the H-ADC assumes negligible permeability). Built-in diffusion-encoding pulse sequences include the Pulsed Gradient Spin Echo and the Oscilating Gradient Spin Echo. △ Less

Submitted 16 September, 2019; v1 submitted 3 February, 2019; originally announced February 2019.

Comments: 49 pages, 18 figures

Journal ref: Li et al., SpinDoctor: A MATLAB toolbox for diffusion MRI simulation, NeuroImage, Volume 202, 2019, 116120

Analysis of Testbeam Data of the Highly Granular RPC-Steel CALICE Digital Hadron Calorimeter and Validation of Geant4 Monte Carlo Models

Authors: CALICE Collaboration, M. Chefdeville, J. Repond, J. Schlereth, J. R. Smith, D. Trojand, L. Xia, Q. Zhang, J. Apostolakis, C. Grefe, V. Ivantchenko, G. Folger, A. Ribon, V. Uzhinskiy, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, O. Bach, V. Bocharnikov, E. Brianne, K. Gadow, P. Göttlicher, O. Hartbrich, D. Heuchel , et al. (71 additional authors not shown)

Abstract: We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of… ▽ More We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of $1\,\times\,1\,$cm$^{2}$ and a longitudinal segmentation of 38 layers, the calorimeter counted 350,208 readout channels, each read out with single-bit resolution (digital readout). The data were recorded in the Fermilab test beam in 2010-11. The analysis includes measurements of the calorimeter response and the energy resolution to positrons and muons, as well as detailed studies of various shower shape quantities. The results are compared to simulations based on Geant4, which utilise different electromagnetic and hadronic physics lists. △ Less

Submitted 25 January, 2019; originally announced January 2019.

Report number: CALICE-PUB-2019-001

A comprehensive model of the optical spectra of carbon nanotubes on substrate by polarized microscopy

Authors: Léonard Monniello, Huy-Nam Tran, Rémy Vialla, Guillaume Prévot, Said Tahir, Thierry Michel, Vincent Jourdain

Abstract: Polarized optical microscopy and spectroscopy are progressively becoming key methods for the high-throughput characterization of individual carbon nanotubes (CNTs) and other one-dimensional nanostructures, on substrate and in devices. The optical response of CNTs on substrate in cross polarization experiments is usually limited by the polarization conservation of the optical elements in the experi… ▽ More Polarized optical microscopy and spectroscopy are progressively becoming key methods for the high-throughput characterization of individual carbon nanotubes (CNTs) and other one-dimensional nanostructures, on substrate and in devices. The optical response of CNTs on substrate in cross polarization experiments is usually limited by the polarization conservation of the optical elements in the experimental setup. We developed a theoretical model taking into account the depolarization by the setup and the optical response of the substrate. We show that proper modelization of the experimental data requires to take into account both non-coherent and coherent light depolarization by the optical elements. We also show how the nanotube signal can be decoupled from the complex reflection factor of the anti-reflection substrate which is commonly used to enhance the optical contrast. Finally, we describe an experimental protocol to extract the depolarization parameters and the complex nanotube susceptibility, and how it can improve the chirality assignment of individual carbon nanotubes in complex cases. △ Less

Submitted 23 November, 2018; originally announced November 2018.

Comments: 10 pages, 7 Figures, submitted to PRB. A supplementary information completes this paper

Journal ref: Phys. Rev. B 99, 115431 (2019)

Scale-variant topological information for characterizing the structure of complex networks

Authors: Quoc Hoan Tran, Van Tuan Vo, Yoshihiko Hasegawa

Abstract: The structure of real-world networks is usually difficult to characterize owing to the variation of topological scales, the nondyadic complex interactions, and the fluctuations in the network. We aim to address these problems by introducing a general framework using a method based on topological data analysis. By considering the diffusion process at a single specified timescale in a network, we ma… ▽ More The structure of real-world networks is usually difficult to characterize owing to the variation of topological scales, the nondyadic complex interactions, and the fluctuations in the network. We aim to address these problems by introducing a general framework using a method based on topological data analysis. By considering the diffusion process at a single specified timescale in a network, we map the network nodes to a finite set of points that contains the topological information of the network at a single scale. Subsequently, we study the shape of these point sets over variable timescales that provide scale-variant topological information, to understand the varying topological scales and the complex interactions in the network. We conduct experiments on synthetic and real-world data to demonstrate the effectiveness of the proposed framework in identifying network models, classifying real-world networks, and detecting transition points in time-evolving networks. Overall, our study presents a unified analysis that can be applied to more complex network structures, as in the case of multilayer and multiplex networks. △ Less

Submitted 27 August, 2019; v1 submitted 8 November, 2018; originally announced November 2018.

Comments: 19 pages, 13 figures

Journal ref: Phys. Rev. E 100, 032308 (2019)

Hadronic Energy Resolution of a Combined High Granularity Scintillator Calorimeter System

Authors: CALICE Collaboration, J. Repond, L. Xia, J. Apostolakis, G. Folger, V. Ivantchenko, A. Ribon, V. Uzhinskiy, D. Boumediene, V. Francais, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, O. Bach, E. Brianne, A. Ebrahimi, K. Gadow, P. Gttlicher, O. Hartbrich F. Krivan, K. Krüger, J. Kvasnicka, S. Lu, C. Neubüser, A. Provenza , et al. (84 additional authors not shown)

Abstract: This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles.… ▽ More This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles. The results of a software compensation technique based on weighting according to hit energy are compared to those of a standard linear energy reconstruction. The results are compared to predictions of the GEANT4 physics lists QGSP_BERT_HP and FTFP_BERT_HP. △ Less

Submitted 12 September, 2018; v1 submitted 11 September, 2018; originally announced September 2018.

Comments: 31 pages, 41 figures

Neutron Scattering Instrumentation at Compact Neutron Sources

Authors: Sarah Böhm, Tobias Cronert, Jan-Philipp Dabrück, Xavier Fabrèges, Thomas Gutberlet, Ferenc Mezei, Alain Letourneau, Alain Menelle, Frédéric Ott, Ulrich Rücker, Hoang Tran, Jorg Voïgt, Paul Zakalek

Abstract: There is currently a strong interest in Compact Accelerator-based Neutron Source (CANS) as a possible new type of source for neutron scattering experiments. A workshop around the "Neutron scattering instrumentation around CANS" was organized in July 2017 between several European institutes. This report summarizes the main outcome of the discussions. The document is aiming at providing general guid… ▽ More There is currently a strong interest in Compact Accelerator-based Neutron Source (CANS) as a possible new type of source for neutron scattering experiments. A workshop around the "Neutron scattering instrumentation around CANS" was organized in July 2017 between several European institutes. This report summarizes the main outcome of the discussions. The document is aiming at providing general guidelines for the instrumentation around CANS. Detailed technical discussions are or will be provided in specific publications. △ Less

Submitted 7 September, 2018; originally announced September 2018.

Comments: Minutes of the "Neutron Scattering Instrumentation at CANS" workshop, Gif-sur-Yvette, France, Juillet 2018

Far infrared measurements of absorptions by CH4+CO2 and H2+CO2 mixtures and implications for greenhouse warming on early Mars

Authors: Martin Turbet, Ha Tran, Olivier Pirali, Francois Forget, Christian Boulet, Jean-Michel Hartmann

Abstract: We present an experimental study of the absorption, between 40 and 640 cm$^{-1}$, by CO$_2$, CH$_4$ and H$_2$ gases as well as by H$_2$+CO$_2$ and CH$_4$+CO$_2$ mixtures at room temperature. A Fourier transform spectrometer associated to a multi-pass cell, whose optics were adjusted to obtain a 152 m pathlength, were used to record transmission spectra at total pressures up to about 0.98 bar. Thes… ▽ More We present an experimental study of the absorption, between 40 and 640 cm$^{-1}$, by CO$_2$, CH$_4$ and H$_2$ gases as well as by H$_2$+CO$_2$ and CH$_4$+CO$_2$ mixtures at room temperature. A Fourier transform spectrometer associated to a multi-pass cell, whose optics were adjusted to obtain a 152 m pathlength, were used to record transmission spectra at total pressures up to about 0.98 bar. These measurements provide information concerning the collision-induced absorption (CIA) bands as well as about the wing of the CO$_2$ 15 $μ$m band. Our results for the CIAs of pure gases are, within uncertainties, in agreement with previous determinations, validating our experimental and data analysis procedures. We then consider the CIAs by H$_2$+CO$_2$ and CH$_4$+CO$_2$ and the low frequency wing of the pure CO$_2$ 15 $μ$m band, for which there are, to our knowledge, no previous measurements. We confirm experimentally the theoretical prediction of Wordsworth et al. 2017 that the H$_2$+CO$_2$ and CH$_4$+CO$_2$ CIAs are significantly stronger in the 50-550 cm$^{-1}$ region than those of H$_2$+N$_2$ and CH$_4$+N$_2$, respectively. However, we find that the shape and the strength of these recorded CIAs differ from the aforementioned predictions. For the pure CO$_2$ line-wings, we show that both the $χ$-factor deduced from measurements near 4 $μ$m and a line-mixing model very well describe the observed strongly sub-Lorentzian behavior in the 500-600 cm$^{-1}$ region. These experimental results open renewed perspectives for studies of the past climate of Mars and extrasolar analogues. △ Less

Submitted 21 November, 2018; v1 submitted 7 May, 2018; originally announced May 2018.

Comments: Accepted for publication in Icarus. 22 pages, 7 figures, 2 tables

Topological time-series analysis with delay-variant embedding

Authors: Quoc Hoan Tran, Yoshihiko Hasegawa

Abstract: Identifying the qualitative changes in time-series data provides insights into the dynamics associated with such data. Such qualitative changes can be detected through topological approaches, which first embed the data into a high-dimensional space using a time-delay parameter and subsequently extract topological features describing the shape of the data from the embedded points. However, the esse… ▽ More Identifying the qualitative changes in time-series data provides insights into the dynamics associated with such data. Such qualitative changes can be detected through topological approaches, which first embed the data into a high-dimensional space using a time-delay parameter and subsequently extract topological features describing the shape of the data from the embedded points. However, the essential topological features that are extracted using a single time delay are considered to be insufficient for evaluating the aforementioned qualitative changes, even when a well-selected time delay is used. We therefore propose a delay-variant embedding method that constructs the extended topological features by considering the time delay as a variable parameter instead of considering it as a single fixed value. This delay-variant embedding method reveals multiple-time-scale patterns in a time series by allowing the observation of the variations in topological features, with the time delay serving as an additional dimension in the topological feature space. We theoretically prove that the constructed topological features are robust when the time series is perturbed by noise. Furthermore, we combine these features with the kernel technique in machine learning algorithms to classify the general time-series data. We demonstrate the effectiveness of our method for classifying the synthetic noisy biological and real time-series data. Our method outperforms a method that is based on a single time delay and, surprisingly, achieves the highest classification accuracy on an average among the standard time-series analysis techniques. △ Less

Submitted 10 January, 2019; v1 submitted 28 February, 2018; originally announced March 2018.

Comments: Main(12 pages, 8 figures)

Journal ref: Phys. Rev. E 99, 032209 (2019)

Measurements and modeling of absorption by CO2+H2O mixtures in the spectral region beyond the CO2 nu3-band head

Authors: Ha Tran, Martin Turbet, Pascale Chelin, Xavier Landsheere

Abstract: In this work, we measured the absorption by CO2+H2O mixtures from 2400 to 2600 cm-1 which corresponds to the spectral region beyond the nu3 band head of CO2. Transmission spectra of CO2 mixed with water vapor were recorded with a high-resolution Fourier-transform spectrometer for various pressure, temperature and concentration conditions. The continuum absorption by CO2 due to the presence of wate… ▽ More In this work, we measured the absorption by CO2+H2O mixtures from 2400 to 2600 cm-1 which corresponds to the spectral region beyond the nu3 band head of CO2. Transmission spectra of CO2 mixed with water vapor were recorded with a high-resolution Fourier-transform spectrometer for various pressure, temperature and concentration conditions. The continuum absorption by CO2 due to the presence of water vapor was determined by subtracting from measured spectra the contribution of local lines of both species, that of the continuum of pure CO2 as well as of the self- and CO2-continua of water vapor induced by the H2O-H2O and H2O-CO2 interactions. The obtained results are in very good agreement with the unique previous measurement (in a narrower spectral range). They confirm that the H2O-continuum of CO2 is significantly larger than that observed for pure CO2. This continuum thus must be taken into account in radiative transfer calculations for media involving CO2+H2O mixture. An empirical model, using sub-Lorentzian line shapes based on some temperature-dependent correction factors chi is proposed which enables an accurate description of the experimental results. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Comments: Accepted in Icarus. 16 pages, 3 figures

DeepIso: A Deep Learning Model for Peptide Feature Detection

Authors: Fatema Tuz Zohora, Ngoc Hieu Tran, Xianglilan Zhang, Lei Xin, Baozhen Shan, Ming Li

Abstract: Liquid chromatography with tandem mass spectrometry (LC-MS/MS) based proteomics is a well-established research field with major applications such as identification of disease biomarkers, drug discovery, drug design and development. In proteomics, protein identification and quantification is a fundamental task, which is done by first enzymatically digesting it into peptides, and then analyzing pept… ▽ More Liquid chromatography with tandem mass spectrometry (LC-MS/MS) based proteomics is a well-established research field with major applications such as identification of disease biomarkers, drug discovery, drug design and development. In proteomics, protein identification and quantification is a fundamental task, which is done by first enzymatically digesting it into peptides, and then analyzing peptides by LC-MS/MS instruments. The peptide feature detection and quantification from an LC-MS map is the first step in typical analysis workflows. In this paper we propose a novel deep learning based model, DeepIso, that uses Convolutional Neural Networks (CNNs) to scan an LC-MS map to detect peptide features and estimate their abundance. Existing tools are often designed with limited engineered features based on domain knowledge, and depend on pretrained parameters which are hardly updated despite huge amount of new coming proteomic data. Our proposed model, on the other hand, is capable of learning multiple levels of representation of high dimensional data through its many layers of neurons and continuously evolving with newly acquired data. To evaluate our proposed model, we use an antibody dataset including a heavy and a light chain, each digested by Asp-N, Chymotrypsin, Trypsin, thus giving six LC-MS maps for the experiment. Our model achieves 93.21% sensitivity with specificity of 99.44% on this dataset. Our results demonstrate that novel deep learning tools are desirable to advance the state-of-the-art in protein identification and quantification. △ Less

Submitted 8 December, 2017; originally announced January 2018.

Construction and Response of a Highly Granular Scintillator-based Electromagnetic Calorimeter

Authors: CALICE collaboration, J. Repond, L. Xia, G. Eigen, T. Price, N. K. Watson, A. Winter, M. A. Thomson, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, K. Gadow, P. Göttlicher, O. Hartbrich, F. Krivan, K. Krüger, S. Lu, B. Lutz, M. Reinecke, F. Sefkow, Y. Sudo, H. L. Tran, A. Kaplan, H. -Ch. Schultz-Coulon , et al. (57 additional authors not shown)

Abstract: A highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future lepton collider experiments. A prototype of 21.5 $X_0$ depth and $180 \times 180 $mm$^2$ transverse dimensions was constructed, consisting of 2160 individually read out $10 \times 45 \times 3$ mm$^3$ scintillator strips. This prototype was tested using electrons of 2--32 GeV at the Fermilab… ▽ More A highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future lepton collider experiments. A prototype of 21.5 $X_0$ depth and $180 \times 180 $mm$^2$ transverse dimensions was constructed, consisting of 2160 individually read out $10 \times 45 \times 3$ mm$^3$ scintillator strips. This prototype was tested using electrons of 2--32 GeV at the Fermilab Test Beam Facility in 2009. Deviations from linear energy response were less than 1.1\%, and the intrinsic energy resolution was determined to be $(12.5 \pm 0.1 (\mathrm{stat.}) \pm0.4 (\mathrm{syst.}))\%/\sqrt{E[\mathrm{GeV}]}\oplus (1.2 \pm 0.1(\mathrm{stat.})^{+0.6}_{-0.7}(\mathrm{syst.}))\%$, where the uncertainties correspond to statistical and systematic sources, respectively. △ Less

Submitted 28 February, 2018; v1 submitted 22 July, 2017; originally announced July 2017.

Comments: This article is published in Nuclear Inst. and Methods in Physics Research, A 887 (2018) 150-168

Journal ref: Nuclear Inst. and Methods in Physics Research, A 887 (2018) 150-168

Software compensation in Particle Flow reconstruction

Authors: Huong Lan Tran, Katja Krüger, Felix Sefkow, Steven Green, John Marshall, Mark Thomson, Frank Simon

Abstract: The particle flow approach to calorimetry benefits from highly granular calorimeters and sophisticated software algorithms in order to reconstruct and identify individual particles in complex event topologies. The high spatial granularity, together with analogue energy information, can be further exploited in software compensation. In this approach, the local energy density is used to discriminate… ▽ More The particle flow approach to calorimetry benefits from highly granular calorimeters and sophisticated software algorithms in order to reconstruct and identify individual particles in complex event topologies. The high spatial granularity, together with analogue energy information, can be further exploited in software compensation. In this approach, the local energy density is used to discriminate electromagnetic and purely hadronic sub-showers within hadron showers in the detector to improve the energy resolution for single particles by correcting for the intrinsic non-compensation of the calorimeter system. This improvement in the single particle energy resolution also results in a better overall jet energy resolution by improving the energy measurement of identified neutral hadrons and improvements in the pattern recognition stage by a more accurate matching of calorimeter energies to tracker measurements. This paper describes the software compensation technique and its implementation in particle flow reconstruction with the Pandora Particle Flow Algorithm (PandoraPFA). The impact of software compensation on the choice of optimal transverse granularity for the analogue hadronic calorimeter option of the International Large Detector (ILD) concept is also discussed. △ Less

Submitted 25 October, 2017; v1 submitted 29 May, 2017; originally announced May 2017.

Comments: 13 pages, 13 figures, v2 with wording and figure improvements, published in EPJ C

Report number: DESY 17-083; MPP-2017-98

Journal ref: Eur. Phys. J. C 77, 698 (2017)

MuSIC: delivering the world's most intense muon beam

Authors: S. Cook, R. D'Arcy, A. Edmonds, M. Fukuda, K. Hatanaka, Y. Hino, Y. Kuno, M. Lancaster, Y. Mori, T. Ogitsu, H. Sakamoto, A. Sato, N. H. Tran, N. M. Truong, M. Wing, A. Yamamoto, M. Yoshida

Abstract: A new muon beamline, muon science innovative channel (MuSIC), was set up at the Research Centre for Nuclear Physics (RCNP), Osaka University, in Osaka, Japan, using the 392 MeV proton beam im**ing on a target. The production of an intense muon beam relies on the efficient capture of pions, which subsequently decay to muons, using a novel superconducting solenoid magnet system. After the pion-cap… ▽ More A new muon beamline, muon science innovative channel (MuSIC), was set up at the Research Centre for Nuclear Physics (RCNP), Osaka University, in Osaka, Japan, using the 392 MeV proton beam im**ing on a target. The production of an intense muon beam relies on the efficient capture of pions, which subsequently decay to muons, using a novel superconducting solenoid magnet system. After the pion-capture solenoid the first $36^\circ$ of the curved muon transport line was commissioned and the muon flux was measured. In order to detect muons, a target of either copper or magnesium was placed to stop muons at the end of the muon beamline. Two stations of plastic scintillators located upstream and downstream from the muon target were used to reconstruct the decay spectrum of muons. In a complementary method to detect negatively-charged muons, the X-ray spectrum yielded by muonic atoms in the target were measured in a germanium detector. Measurements, at a proton beam current of 6 pA, yielded $(10.4 \pm 2.7) \times 10^5$ muons per Watt of proton beam power ($μ^+$ and $μ^-$), far in excess of other facilities. At full beam power (400 W), this implies a rate of muons of $(4.2 \pm 1.1) \times 10^8$ muons s$^{-1}$, amongst the highest in the world. The number of $μ^-$ measured was about a factor of 10 lower, again by far the most efficient muon beam produced. The set up is a prototype for future experiments requiring a high-intensity muon beam, such as a muon collider or neutrino factory, or the search for rare muon decays which would be a signature for phenomena beyond the Standard Model of particle physics. Such a muon beam can also be used in other branches of physics, nuclear and condensed matter, as well as other areas of scientific research. △ Less

Submitted 25 October, 2016; originally announced October 2016.

Comments: 15 pages, 5 figures, submitted to Phys. Rev. ST-Acc. Beams

Extinction of Light and Coherent Scattering by a Single Nitrogen-Vacancy Center in Diamond

Authors: Thai Hien Tran, Jörg Wrachtrup, Ilja Gerhardt

Abstract: Coherently scattered light from a single quantum system promises to get a valuable quantum resource. In this letter an external laser field is efficiently coupled to a single nitrogen vacancy (NV-)center in diamond. By this it is possible to detect a direct extinction signal and estimate the NV's extinction cross-section. The exact amount of coherent and incoherent photons is determined against th… ▽ More Coherently scattered light from a single quantum system promises to get a valuable quantum resource. In this letter an external laser field is efficiently coupled to a single nitrogen vacancy (NV-)center in diamond. By this it is possible to detect a direct extinction signal and estimate the NV's extinction cross-section. The exact amount of coherent and incoherent photons is determined against the saturation parameter, and reveals the optimal point of generating coherently scattered photons and an optimal point of excitation. A theoretical model of spectral diffusion allows to explain the deviation to an atom in free-space. The introduced experimental techniques are used to determine the properties of the tight focusing in an interference experiment, and allow for a direct determination of the Gouy-phase in a strongly focused beam. △ Less

Submitted 18 August, 2016; originally announced August 2016.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. A 95, 053831 (2017)

Resistive Plate Chamber Digitization in a Hadronic Shower Environment

Authors: Z. Deng, Y. Li, Y. Wang, Q. Yue, Z. Yang, J. Apostolakis, G. Folger, C. Grefe, V. Ivantchenko, A. Ribon, V. Uzhinskiy, D. Boumediene, C. Carloganu, V. Français, G. Cho, D-W. Kim, S. C. Lee, W. Park, S. Vallecorsa, S. Cauwenbergh, M. Tytgat, A. **ault, N. Zaganidis, E. Brianne, A. Ebrahimi , et al. (103 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, e… ▽ More The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated. △ Less

Submitted 15 April, 2016; originally announced April 2016.