-
Thermalization of a SQUID chip at cryogenic temperature: Thermal conductance measurement for GE 7031 Varnish Glue, Apiezon N Grease and Rubber Cement between 20 and 200 mK
Authors:
M. D'Andrea,
G. Torrioli,
C. Macculi,
M. Kiviranta
Abstract:
In the context of the ATHENA X-IFU Cryogenic AntiCoincidence Detector (CryoAC) development, we have studied the thermalization properties of a 2mm x 2mm SQUID chip. The chip is glued on a front-end PCB and operated on the cold stage of a dilution refrigerator (TBASE < 20 mK). We performed thermal conductance measurements by using different materials to glue the SQUID chip on the PCB. These have be…
▽ More
In the context of the ATHENA X-IFU Cryogenic AntiCoincidence Detector (CryoAC) development, we have studied the thermalization properties of a 2mm x 2mm SQUID chip. The chip is glued on a front-end PCB and operated on the cold stage of a dilution refrigerator (TBASE < 20 mK). We performed thermal conductance measurements by using different materials to glue the SQUID chip on the PCB. These have been repeated in subsequent cryostat runs, to highlight degradation effects due to thermal cycles. Here, we present the results obtained by glues and greases widely used in cryogenic environments, i.e. GE 7031 Varnish Glue, Apiezon N Grease and Rubber Cement.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
The TES-based Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU: a large area silicon microcalorimeter for background particles detection
Authors:
M. D'Andrea,
C. Macculi,
S. Lotti,
L. Piro,
A. Argan,
G. Minervini,
G. Torrioli,
F. Chiarello,
L. Ferrari Barusso,
E. Celasco,
G. Gallucci,
F. Gatti,
D. Grosso,
M. Rigano,
D. Brienza,
E. Cavazzuti,
A. Volpe
Abstract:
We are develo** the Cryogenic AntiCoincidence detector (CryoAC) of the ATHENA X-IFU spectrometer. It is a TES-based particle detector aimed to reduce the background of the instrument. Here, we present the result obtained with the last CryoAC single-pixel prototype. It is based on a 1 cm2 silicon absorber sensed by a single 2mm x 1mm Ir/Au TES, featuring an on-chip heater for calibration and diag…
▽ More
We are develo** the Cryogenic AntiCoincidence detector (CryoAC) of the ATHENA X-IFU spectrometer. It is a TES-based particle detector aimed to reduce the background of the instrument. Here, we present the result obtained with the last CryoAC single-pixel prototype. It is based on a 1 cm2 silicon absorber sensed by a single 2mm x 1mm Ir/Au TES, featuring an on-chip heater for calibration and diagnostic purposes. We have illuminated the sample with 55Fe (6 keV line) and 241Am (60 keV line) radioactive sources, thus studying the detector response and the heater calibration accuracy at low energy. Furthermore, we have operated the sample in combination with a past-generation CryoAC prototype. Here, by analyzing the coincident detections between the two detectors, we have been able to characterize the background spectrum of the laboratory environment and disentangle the primary (i.e. cosmic muons) and secondaries (mostly secondary photons and electrons) signatures in the spectral shape.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
Frequency-modulated combs via on-chip field enhancement
Authors:
Urban Senica,
Alexander Dikopoltsev,
Andres Forrer,
Sara Cibella,
Guido Torrioli,
Mattias Beck,
Jérôme Faist,
Giacomo Scalari
Abstract:
Frequency-modulated (FM) combs feature flat intensity spectra with a linear frequency chirp, useful for metrology and sensing applications. Generating FM combs in semiconductor lasers generally requires a fast saturable gain, usually limited by the intrinsic gain medium properties. Here, we show how a spatial modulation of the laser gain medium can enhance the gain saturation dynamics and nonlinea…
▽ More
Frequency-modulated (FM) combs feature flat intensity spectra with a linear frequency chirp, useful for metrology and sensing applications. Generating FM combs in semiconductor lasers generally requires a fast saturable gain, usually limited by the intrinsic gain medium properties. Here, we show how a spatial modulation of the laser gain medium can enhance the gain saturation dynamics and nonlinearities to generate self-starting FM combs. We demonstrate this with tapered planarized THz quantum cascade lasers (QCLs). While simple ridge THz QCLs typically generate combs which are a mixture of amplitude and frequency modulation, the on-chip field enhancement resulting from extreme spatial confinement leads to an ultrafast saturable gain regime, generating a pure FM comb with a flatter intensity spectrum, a clear linear frequency chirp and very intense beatnotes up to -30 dBm. The observed linear frequency chirp is reproduced using a spatially inhomogeneous mean-field theory model which confirms the crucial role of field enhancement. In addition, the modified spatial temperature distribution within the waveguide results in an improved hightemperature comb operation, up to a heat sink temperature of 115 K, with comb bandwidths of 600 GHz at 90 K. The spatial inhomogeneity also leads to dynamic switching between various harmonic states in the same device.
△ Less
Submitted 17 June, 2023; v1 submitted 2 May, 2023;
originally announced May 2023.
-
Step** closer to pulsed single microwave photon detectors for axions search
Authors:
A. D'Elia,
A. Rettaroli,
S. Tocci,
D. Babusci,
C. Barone,
M. Beretta,
B. Buonomo,
F. Chiarello,
N. Chikhi,
D. Di Gioacchino,
G. Felici,
G. Filatrella,
M. Fistul,
L. G. Foggetta,
C. Gatti,
E. Il'ichev,
C. Ligi,
M. Lisitskiy,
G. Maccarrone,
F. Mattioli,
G. Oelsner,
S. Pagano,
L. Piersanti,
B. Ruggiero,
G. Torrioli
, et al. (1 additional authors not shown)
Abstract:
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches t…
▽ More
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches that both rely on the use of superconducting devices based on the Josephson effect. The first one is to use a single Josephson junction (JJ) as a switching detector (i.e. exploiting the superconducting to normal state transition in presence of microwave photons). We designed a device composed of a coplanar waveguide terminated on a current biased Josephson junction. We tested its efficiency to pulsed (pulse duration 10 ns) microwave signals, since this configuration is closer to an actual axions search experiment. We show how our device is able to reach detection capability of the order of 10 photons with frequency 8 GHz. The second approach is based on an intrinsically quantum device formed by two resonators coupled only via a superconducting qubit network (SQN). This approach relies on quantum nondemolition measurements of the resonator photons. We show that injecting RF power into the resonator, the frequency position of the resonant drop in the transmission coefficient (S21) can be modulated up to 4 MHz. We anticipate that, once optimized, both the devices have the potential to reach single photon sensitivity.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
THz optical beat-note detection with a fast Hot Electron Bolometer operating up to 31 GHz
Authors:
G. Torrioli,
A. Forrer,
M. Beck,
P. Carelli,
F. Chiarello,
J. Faist,
A. Gaggero,
E. Giovine,
F. Martini,
U. Senica,
R. Leoni,
G. Scalari,
S. Cibella
Abstract:
We study the performance of an hot-electron bolometer (HEB) operating at THz frequencies based on superconducting niobium nitride films. We report on the voltage response of the detector over a large optical bandwidth carried out with different THz sources. We show that the impulse response of the fully packaged HEB at 7.5 K has a 3 dB cut-off around 2 GHz. Remarkably, detection capability is stil…
▽ More
We study the performance of an hot-electron bolometer (HEB) operating at THz frequencies based on superconducting niobium nitride films. We report on the voltage response of the detector over a large optical bandwidth carried out with different THz sources. We show that the impulse response of the fully packaged HEB at 7.5 K has a 3 dB cut-off around 2 GHz. Remarkably, detection capability is still observed above 30 GHz in an heterodyne beating experiment using a THz quantum cascade laser frequency comb. Additionally, the HEB sensitivity has been evaluated and an optical noise equivalent power NEP of 0.8 pW/sqrt(Hz) has been measured at 1 MHz.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
THz optical solitons from dispersion-compensated antenna-coupled planarized ring quantum cascade lasers
Authors:
Paolo Micheletti,
Urban Senica,
Andres Forrer,
Sara Cibella,
Guido Torrioli,
Martin Frankié,
Jérôme Faist,
Mattias Beck,
Giacomo Scalari
Abstract:
Quantum Cascade Lasers (QCL) constitute an intriguing opportunity for the production of on-chip optical Dissipative Kerr Solitons (DKS): self-organized optical waves which can travel while preserving their shape thanks to the interplay between Kerr effect and dispersion. Originally demonstrated in passive microresonators, DKS were recently observed in mid-IR ring QCL paving the way for their achie…
▽ More
Quantum Cascade Lasers (QCL) constitute an intriguing opportunity for the production of on-chip optical Dissipative Kerr Solitons (DKS): self-organized optical waves which can travel while preserving their shape thanks to the interplay between Kerr effect and dispersion. Originally demonstrated in passive microresonators, DKS were recently observed in mid-IR ring QCL paving the way for their achievement even at longer wavelengths. To this end we realized defect-less THz ring QCLs featuring anomalous dispersion leveraging on a technological platform based on waveguide planarization. A concentric coupled-waveguide approach is implemented for dispersion compensation whilst a passive broadband bullseye antenna improves the device power extraction and far field. In these devices, comb spectra featuring sech$^2$ envelopes are presented for free-running operation. This first hint of the presence of solitons is further supported by the observation of highly hysteretic behaviour and by phase-sensitive measurements which show the presence of self-starting 12 ps-long pulses in the reconstructed time profile of the emission intensity. These observations are in very good agreement with our numeric simulations based on a Complex Ginzburg-Landau equation time-domain solver. Such devices constitute a new experimental platform for the study of soliton phenomena in the THz range, allowing as well on-chip, passive ultrashort THz pulse generation appealing for a variety of applications.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Planarized THz quantum cascade lasers for broadband coherent photonics
Authors:
Urban Senica,
Andres Forrer,
Tudor Olariu,
Paolo Micheletti,
Sara Cibella,
Guido Torrioli,
Mattias Beck,
Jérôme Faist,
Giacomo Scalari
Abstract:
Recently, there has been a growing interest in integrated THz photonics for various applications in communications, spectroscopy and sensing. We present a new integrated photonic platform based on active and passive elements integrated in a double-metal, high confinement waveguide layout planarized with a low-loss polymer. An extended top metallization results in low waveguide losses and improved…
▽ More
Recently, there has been a growing interest in integrated THz photonics for various applications in communications, spectroscopy and sensing. We present a new integrated photonic platform based on active and passive elements integrated in a double-metal, high confinement waveguide layout planarized with a low-loss polymer. An extended top metallization results in low waveguide losses and improved dispersion, thermal and RF properties, as it enables to decouple the design of THz and microwave cavities. Free-running on-chip quantum cascade laser combs spanning 800 GHz, harmonic states over 1.1 THz and RF-injected broadband incoherent states spanning over nearly 1.6 THz are observed. With a strong external RF drive, actively mode-locked pulses as short as 4.4 ps can be produced, as measured by SWIFTS. We demonstrate as well passive waveguides with low insertion loss, enabling the tuning of the laser cavity boundary conditions and the co-integration of active and passive components on the same THz photonic chip.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
ATHENA X-IFU Demonstration Model: First joint operation of the main TES Array and its Cryogenic AntiCoincidence Detector (CryoAC)
Authors:
M. D'Andrea,
K. Ravensberg,
A. Argan,
D. Brienza,
S. Lotti,
C. Macculi,
G. Minervini,
L. Piro,
G. Torrioli,
F. Chiarello,
L. Ferrari Barusso,
M. Biasotti,
G. Gallucci,
F. Gatti,
M. Rigano,
H. Akamatsu,
J. Dercksen,
L. Gottardi,
F. de Groote,
R. den Hartog,
J. -W. den Herder,
R. Hoogeveen,
B. Jackson,
A. McCalden,
S. Rosman
, et al. (6 additional authors not shown)
Abstract:
The X-IFU is the cryogenic spectrometer onboard the future ATHENA X-ray observatory. It is based on a large array of TES microcalorimeters, which works in combination with a Cryogenic AntiCoincidence detector (CryoAC). This is necessary to reduce the particle background level thus enabling part of the mission science goals. Here we present the first joint test of X-IFU TES array and CryoAC Demonst…
▽ More
The X-IFU is the cryogenic spectrometer onboard the future ATHENA X-ray observatory. It is based on a large array of TES microcalorimeters, which works in combination with a Cryogenic AntiCoincidence detector (CryoAC). This is necessary to reduce the particle background level thus enabling part of the mission science goals. Here we present the first joint test of X-IFU TES array and CryoAC Demonstration Models, performed in a FDM setup. We show that it is possible to operate properly both detectors, and we provide a preliminary demonstration of the anti-coincidence capability of the system achieved by the simultaneous detection of cosmic muons.
△ Less
Submitted 30 June, 2022;
originally announced June 2022.
-
Development of a Josephson junction based single photon microwave detector for axion detection experiments
Authors:
D Alesini,
D Babusci,
C Barone,
B Buonomo,
M M Beretta,
L Bianchini,
G Castellano,
F Chiarello,
D Di Gioacchino,
P Falferi,
G Felici,
G Filatrella,
L G Foggetta,
A Gallo,
C Gatti,
F Giazotto,
G Lamanna,
F Ligabue,
N Ligato,
C Ligi,
G Maccarrone,
B Margesin,
F Mattioli,
E Monticone,
L Oberto
, et al. (8 additional authors not shown)
Abstract:
Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson…
▽ More
Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson junction to be enough sensitive, small critical currents and operating temperatures of the order of ten of mK are necessary. Thermal and quantum tunnelling out of the zero-voltage state can also mask the detection process. Axion detection would require dark count rates in the order of 0.001 Hz. It is, therefore, is of paramount importance to identify proper device fabrication parameters and junction operation point.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Status of the SIMP Project: Toward the Single Microwave Photon Detection
Authors:
David Alesini,
Danilo Babusci,
Carlo Barone,
Bruno Buonomo,
Matteo Mario Beretta,
Lorenzo Bianchini,
Gabriella Castellano,
Fabio Chiarello,
Daniele Di Gioacchino,
Paolo Falferi,
Giulietto Felici,
Giovanni Filatrella,
Luca Gennaro Foggetta,
Alessandro Gallo,
Claudio Gatti,
Francesco Giazotto,
Gianluca Lamanna,
Franco Ligabue,
Nadia Ligato,
Carlo Ligi,
Giovanni Maccarrone,
Benno Margesin,
Francesco Mattioli,
Eugenio Monticone,
Luca Oberto
, et al. (8 additional authors not shown)
Abstract:
The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for th…
▽ More
The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for the frequency range 10-50 GHz and Transition Edge Sensor (TES) for the frequency range 30-100 GHz. Preliminary results on materials and devices characterization are presented.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
The Demonstration Model of the ATHENA X-IFU Cryogenic AntiCoincidence Detector
Authors:
Matteo D'Andrea,
Claudio Macculi,
Guido Torrioli,
Andrea Argan,
Daniele Brienza,
Simone Lotti,
Gabriele Minervini,
Luigi Piro,
Michele Biasotti,
Lorenzo Ferrari Barusso,
Flavio Gatti,
Manuela Rigano,
Angela Volpe,
Elia Stefano Battistelli
Abstract:
The Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU is designed to reduce the particle background of the instrument and to enable the mission science goals. It is a 4 pixel silicon microcalorimeter sensed by an Ir/Au TES network. We have developed the CryoAC Demonstration Model, a prototype aimed to probe the critical technologies of the detector, i.e. the suspended absorber with an ac…
▽ More
The Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU is designed to reduce the particle background of the instrument and to enable the mission science goals. It is a 4 pixel silicon microcalorimeter sensed by an Ir/Au TES network. We have developed the CryoAC Demonstration Model, a prototype aimed to probe the critical technologies of the detector, i.e. the suspended absorber with an active area of 1 cm2; the low energy threshold of 20 keV; and the operation connected to a 50 mK thermal bath with a power dissipation less than 40 nW. Here we report the test performed on the first CryoAC DM sample (namely the AC-S10 prototype), showing that it is fully compliant with its requirements.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
The Cryogenic AntiCoincidence detector for ATHENA X-IFU: improvement of the test setup towards the Demonstration Model
Authors:
Matteo D'Andrea,
Claudio Macculi,
Andrea Argan,
Simone Lotti,
Gabriele Minervini,
Luigi Piro,
Michele Biasotti,
Dario Corsini,
Flavio Gatti,
Guido Torrioli,
Angela Volpe
Abstract:
The ATHENA X-IFU development program foresees to build and characterize an instrument Demonstration Model (DM), in order to probe the system critical technologies before the mission adoption. In this respect, we are now develo** the DM of the X-IFU Cryogenic Anticoincidence Detector (CryoAC), which will be delivered to the Focal Plane Assembly (FPA) development team for the integration with the…
▽ More
The ATHENA X-IFU development program foresees to build and characterize an instrument Demonstration Model (DM), in order to probe the system critical technologies before the mission adoption. In this respect, we are now develo** the DM of the X-IFU Cryogenic Anticoincidence Detector (CryoAC), which will be delivered to the Focal Plane Assembly (FPA) development team for the integration with the TES array. Before the delivery, we will characterize and test the CryoAC DM in our CryoLab at INAF/IAPS. In this paper we report the main results of the activities performed to improve our cryogenic test setup, making it suitable for the DM integration. These activities mainly consist in the development of a mechanichal setup and a cryogenic magnetic shielding system, whose effectiveness has been assessed by FEM simulations and a measurement at warm. The preliminary performance test has been performed by means of the last CryoAC single pixel prototype, the AC-S8 pre-DM sample.
△ Less
Submitted 23 July, 2018;
originally announced July 2018.
-
The Cryogenic AntiCoincidence detector for ATHENA X-IFU: assessing the role of the athermal phonons collectors in the AC-S8 prototype
Authors:
Matteo D'Andrea,
Claudio Macculi,
Andrea Argan,
Simone Lotti,
Gabriele Minervini,
Luigi Piro,
Michele Biasotti,
Dario Corsini,
Flavio Gatti,
Guido Torrioli
Abstract:
The ATHENA X-ray Observatory is the second large-class mission in the ESA Cosmic Vision 2015-2025 science programme. One of the two on-board instruments is the X-IFU, an imaging spectrometer based on a large array of TES microcalorimeters. To reduce the particle-induced background, the spectrometer works in combination with a Cryogenic Anticoincidence detector (CryoAC), placed less than 1 mm below…
▽ More
The ATHENA X-ray Observatory is the second large-class mission in the ESA Cosmic Vision 2015-2025 science programme. One of the two on-board instruments is the X-IFU, an imaging spectrometer based on a large array of TES microcalorimeters. To reduce the particle-induced background, the spectrometer works in combination with a Cryogenic Anticoincidence detector (CryoAC), placed less than 1 mm below the TES array. The last CryoAC single-pixel prototypes, namely AC-S7 and AC-S8, are based on large area (1 cm2) Silicon absorbers sensed by 65 parallel-connected iridium TES. This design has been adopted to improve the response generated by the athermal phonons, which will be used as fast anticoincidence flag. The latter sample is featured also with a network of Aluminum fingers directly connected to the TES, designed to further improve the athermals collection efficiency. In this paper we will report the main results obtained with AC-S8, showing that the additional fingers network is able to increase the energy collected from the athermal part of the pulses (from the 6% of AC-S7 up to the 26 % with AC-S8). Furthermore, the finger design is able to prevent the quasiparticle recombination in the aluminum, assuring a fast pulse rising front (L/R limited). In our road map, the AC-S8 prototype is the last step before the development of the CryoAC Demonstration Model (DM), which will be the detector able to demonstrate the critical technologies expected in the CryoAC development programme.
△ Less
Submitted 23 July, 2018;
originally announced July 2018.
-
The Cryogenic Anticoincidence Detector for ATHENA X-IFU: Preliminary test of AC-S9 towards the Demonstration Model
Authors:
Matteo D'Andrea,
Claudio Macculi,
Andrea Argan,
Simone Lotti,
Gabriele Minervini,
Luigi Piro,
Michele Biasotti,
Valentina Ceriale,
Giovanni Gallucci,
Flavio Gatti,
Guido Torrioli,
Angela Volpe
Abstract:
Our team is develo** the Cryogenic Anticoincidence Detector (CryoAC) of the ATHENA X-ray Integral Field Unit (X-IFU). It is a 4-pixels TES-based detector, which will be placed less than 1 mm below the main TES array detector. We are now producing the CryoAC Demonstration Model (DM): a single pixel prototype able to probe the detector critical technologies, i.e. the operation at 50 mK thermal bat…
▽ More
Our team is develo** the Cryogenic Anticoincidence Detector (CryoAC) of the ATHENA X-ray Integral Field Unit (X-IFU). It is a 4-pixels TES-based detector, which will be placed less than 1 mm below the main TES array detector. We are now producing the CryoAC Demonstration Model (DM): a single pixel prototype able to probe the detector critical technologies, i.e. the operation at 50 mK thermal bath, the threshold energy at 20 keV and the reproducibility of the thermal conductance between the suspended absorber and the thermal bath. This detector will be integrated and tested in our cryogenic setup at INAF/IAPS, and then delivered to SRON for the integration in the X-IFU Focal Plane Assemby (FPA) DM.
In this paper we report the status of the CryoAC DM development, showing the main result obtained with the last developed prototype, namely AC-S9. This is a DM-like sample, which we have preliminary integrated and tested before performing the final etching process to suspend the silicon absorber. The results are promising for the DM, since despite the limitations due to the absence of the final etching (high thermal capacity, high thermal conductance, partial TES surface coverage), we have been able to operate the detector with TB = 50 mK and to detect 6 keV photons, thus having a low energy threshold fully compatible with our requirement (20 keV).
△ Less
Submitted 11 July, 2018; v1 submitted 6 July, 2018;
originally announced July 2018.
-
THz Discrimination of materials: demonstration of a bioinspired apparatus based on metasurfaces selective filters
Authors:
P. Carelli,
F. Chiarello,
G. Torrioli,
M. G. Castellano
Abstract:
We present an apparatus for terahertz fingerprint discrimination of materials designed to be fast, simple, compact and economical in order to be suitable for preliminary on-field analysis. The system working principles, bioinspired by the human vision of colors, are based on the use of microfabricated metamaterials selective filters and of a very compact optics based on metallic ellipsoidal mirror…
▽ More
We present an apparatus for terahertz fingerprint discrimination of materials designed to be fast, simple, compact and economical in order to be suitable for preliminary on-field analysis. The system working principles, bioinspired by the human vision of colors, are based on the use of microfabricated metamaterials selective filters and of a very compact optics based on metallic ellipsoidal mirrors in air. We experimentally demonstrate the operation of the apparatus in discriminating simple substances such as salt, staple foods and grease in an accurate and reproducible manner. We present the system and the obtained results and discuss issues and possible developments.
△ Less
Submitted 15 July, 2016;
originally announced July 2016.
-
Search for correlation between GRB's detected by BeppoSAX and gravitational wave detectors EXPLORER and NAUTILUS
Authors:
P. Astone,
M. Bassan,
P. Bonifazi,
P. Carelli,
G. Castellano,
E. Coccia,
C. Cosmelli,
G. D'Agostini,
S. D'Antonio,
V. Fafone,
G. Federici,
F. Frontera,
C. Guidorzi,
A. Marini,
Y. Minenkov,
I. Modena,
G. Modestino,
A. Moleti,
E. Montanari,
G. V. Pallottino,
G. Pizzella,
L. Quintieri,
A. Rocchi,
F. Ronga,
A. Rocchi
, et al. (3 additional authors not shown)
Abstract:
Data obtained during five months of 2001 with the gravitational wave (GW) detectors EXPLORER and NAUTILUS were studied in correlation with the gamma ray burst data (GRB) obtained with the BeppoSAX satellite. During this period BeppoSAX was the only GRB satellite in operation, while EXPLORER and NAUTILUS were the only GW detectors in operation.
No correlation between the GW data and the GRB bur…
▽ More
Data obtained during five months of 2001 with the gravitational wave (GW) detectors EXPLORER and NAUTILUS were studied in correlation with the gamma ray burst data (GRB) obtained with the BeppoSAX satellite. During this period BeppoSAX was the only GRB satellite in operation, while EXPLORER and NAUTILUS were the only GW detectors in operation.
No correlation between the GW data and the GRB bursts was found. The analysis, performed over 47 GRB's, excludes the presence of signals of amplitude h >=1.2 * 10^{-18}, with 95 % probability, if we allow a time delay between GW bursts and GRB within +-400 s, and h >= 6.5 * 10^{-19}, if the time delay is within +- 5 s. The result is also provided in form of scaled likelihood for unbiased interpretation and easier use for further analysis.
△ Less
Submitted 12 July, 2002; v1 submitted 25 June, 2002;
originally announced June 2002.
