-
Optimizing Dynamic Aperture Studies with Active Learning
Authors:
D. Di Croce,
M. Giovannozzi,
E. Krymova,
T. Pieloni,
S. Redaelli,
M. Seidel,
R. Tomás,
F. F. Van der Veken
Abstract:
Dynamic aperture is an important concept for the study of non-linear beam dynamics in circular accelerators. It describes the extent of the phase-space region where a particle's motion remains bounded over a given number of turns. Understanding the features of dynamic aperture is crucial for the design and operation of such accelerators, as it provides insights into nonlinear effects and the possi…
▽ More
Dynamic aperture is an important concept for the study of non-linear beam dynamics in circular accelerators. It describes the extent of the phase-space region where a particle's motion remains bounded over a given number of turns. Understanding the features of dynamic aperture is crucial for the design and operation of such accelerators, as it provides insights into nonlinear effects and the possibility of optimising beam lifetime. The standard approach to calculate the dynamic aperture requires numerical simulations of several initial conditions densely distributed in phase space for a sufficient number of turns to probe the time scale corresponding to machine operations. This process is very computationally intensive and practically outside the range of today's computers. In our study, we introduced a novel method to estimate dynamic aperture rapidly and accurately by utilising a Deep Neural Network model. This model was trained with simulated tracking data from the CERN Large Hadron Collider and takes into account variations in accelerator parameters such as betatron tune, chromaticity, and the strength of the Landau octupoles. To enhance its performance, we integrate the model into an innovative Active Learning framework. This framework not only enables retraining and updating of the computed model, but also facilitates efficient data generation through smart sampling. Since chaotic motion cannot be predicted, traditional tracking simulations are incorporated into the Active Learning framework to deal with the chaotic nature of some initial conditions. The results demonstrate that the use of the Active Learning framework allows faster scanning of the configuration parameters without compromising the accuracy of the dynamic aperture estimates.
△ Less
Submitted 16 February, 2024;
originally announced February 2024.
-
Impact of Beam-Beam Effects on Absolute Luminosity Calibrations at the CERN Large Hadron Collider
Authors:
A. Babaev,
T. Barklow,
O. Karacheban,
W. Kozanecki,
I. Kralik,
A. Mehta,
G. Pasztor,
T. Pieloni,
D. Stickland,
C. Tambasco,
R. Tomas,
J. Wańczyk
Abstract:
At the Large Hadron Collider (LHC), absolute luminosity calibrations obtained by the van der Meer (vdM) method are affected by the mutual electromagnetic interaction of the two beams. The colliding bunches experience relative orbit shifts, as well as optical distortions akin to the dynamic-$β$ effect, that both depend on the transverse beam separation and must therefore be corrected for when deriv…
▽ More
At the Large Hadron Collider (LHC), absolute luminosity calibrations obtained by the van der Meer (vdM) method are affected by the mutual electromagnetic interaction of the two beams. The colliding bunches experience relative orbit shifts, as well as optical distortions akin to the dynamic-$β$ effect, that both depend on the transverse beam separation and must therefore be corrected for when deriving the absolute luminosity scale. In the vdM regime, the beam-beam parameter is small enough that the orbit shift can be calculated analytically. The dynamic-$β$ corrections to the luminometer calibrations, however, had until the end of Run 2 been estimated in the linear approximation only. In this report, the influence of beam-beam effects on the vdM-based luminosity scale is quantified, together with the associated systematic uncertainties, by means of simulations that fully take into account the non-linearity of the beam-beam force, as well as the resulting non-Gaussian distortions of the transverse beam distributions. Two independent multiparticle simulations, one limited to the weak-strong approximation and one that models strong-strong effects in a self-consistent manner, are found in excellent agreement; both predict a percent-level shift of the absolute pp-luminosity values with respect to those assumed until recently in the physics publications of the LHC experiments. These results also provide guidance regarding further studies aimed at reducing the beam-beam-related systematic uncertainty on beam-beam corrections to absolute luminosity calibrations by the van der Meer method.
△ Less
Submitted 19 April, 2024; v1 submitted 17 June, 2023;
originally announced June 2023.
-
Nonlinear cooling of an annular beam distribution
Authors:
A. Bazzani,
F. Capoani,
M. Giovannozzi,
R. Tomàs
Abstract:
In recent years, intense efforts have been devoted to studying how nonlinear effects can be used to shape the transverse beam distribution by means of an adiabatic crossing of nonlinear resonances. By this approach, it is possible to split the beams in the transverse plane, so that the initial single-Gaussian beam is divided into several distinct distributions. This is at the heart of the multitur…
▽ More
In recent years, intense efforts have been devoted to studying how nonlinear effects can be used to shape the transverse beam distribution by means of an adiabatic crossing of nonlinear resonances. By this approach, it is possible to split the beams in the transverse plane, so that the initial single-Gaussian beam is divided into several distinct distributions. This is at the heart of the multiturn extraction process that is successfully in operation at the CERN Proton Synchrotron. Nonlinear effects can also be used to cool a beam by acting on its transverse beam distribution. In this paper, we present and discuss the special case of a beam with an annular distribution, showing how its emittance can be effectively reduced by means of properly devised manipulations based on nonlinear effects.
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
-
Flood risk map from hydrological and mobility data: a case study in São Paulo (Brazil)
Authors:
Lívia Rodrigues Tomás,
Giovanni Guarnieri Soares,
Aurelienne A. S. Jorge,
Jeferson Feitosa Mendes,
Vander L. S. Freitas,
Leonardo B. L. Santos
Abstract:
Cities increasingly face flood risk primarily due to extensive changes of the natural land cover to built-up areas with impervious surfaces. In urban areas, flood impacts come mainly from road interruption. This paper proposes an urban flood risk map from hydrological and mobility data, considering the megacity of São Paulo, Brazil, as a case study. We estimate the flood susceptibility through the…
▽ More
Cities increasingly face flood risk primarily due to extensive changes of the natural land cover to built-up areas with impervious surfaces. In urban areas, flood impacts come mainly from road interruption. This paper proposes an urban flood risk map from hydrological and mobility data, considering the megacity of São Paulo, Brazil, as a case study. We estimate the flood susceptibility through the Height Above the Nearest Drainage algorithm; and the potential impact through the exposure and vulnerability components. We aggregate all variables into a regular grid and then classify the cells of each component into three classes: Moderate, High, and Very High. All components, except the flood susceptibility, have few cells in the Very High class. The flood susceptibility component reflects the presence of watercourses, and it has a strong influence on the location of those cells classified as Very High.
△ Less
Submitted 10 April, 2022;
originally announced April 2022.
-
Beam Measurements and Machine Learning at the CERN Large Hadron Collider
Authors:
P. Arpaia,
G. Azzopardi,
F. Blanc,
X. Buffat,
L. Coyle,
E. Fol,
F. Giordano,
M. Giovannozzi,
T. Pieloni,
R. Prevete,
S. Redaelli,
B. Salvachua,
B. Salvant,
M. Schenk,
M. Solfaroli Camillocci,
R. Tomás,
G. Valentino,
F. F. Van der Veken,
J. Wenninger
Abstract:
This paper presents a review of the recent Machine Learning activities carried out on beam measurements performed at the CERN Large Hadron Collider. This paper has been accepted for publication in IEEE Instrumentation and Measurement Magazine and in the published version no abstract is provided.
This paper presents a review of the recent Machine Learning activities carried out on beam measurements performed at the CERN Large Hadron Collider. This paper has been accepted for publication in IEEE Instrumentation and Measurement Magazine and in the published version no abstract is provided.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
Machine learning for beam dynamics studies at the CERN Large Hadron Collider
Authors:
P. Arpaia,
G. Azzopardi,
F. Blanc,
G. Bregliozzi,
X. Buffat,
L. Coyle,
E. Fol,
F. Giordano,
M. Giovannozzi,
T. Pieloni,
R. Prevete,
S. Redaelli,
B. Salvachua,
B. Salvant,
M. Schenk,
M. Solfaroli Camillocci,
R. Tomàs,
G. Valentino,
F. F. Van der Veken,
J. Wenninger
Abstract:
Machine learning entails a broad range of techniques that have been widely used in Science and Engineering since decades. High-energy physics has also profited from the power of these tools for advanced analysis of colliders data. It is only up until recently that Machine Learning has started to be applied successfully in the domain of Accelerator Physics, which is testified by intense efforts dep…
▽ More
Machine learning entails a broad range of techniques that have been widely used in Science and Engineering since decades. High-energy physics has also profited from the power of these tools for advanced analysis of colliders data. It is only up until recently that Machine Learning has started to be applied successfully in the domain of Accelerator Physics, which is testified by intense efforts deployed in this domain by several laboratories worldwide. This is also the case of CERN, where recently focused efforts have been devoted to the application of Machine Learning techniques to beam dynamics studies at the Large Hadron Collider (LHC). This implies a wide spectrum of applications from beam measurements and machine performance optimisation to analysis of numerical data from tracking simulations of non-linear beam dynamics. In this paper, the LHC-related applications that are currently pursued are presented and discussed in detail, paying also attention to future developments.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
FCC-hh Experimental Insertion Region Design
Authors:
Jose L. Abelleira,
Robert B. Appleby,
Sergey Arsenyev,
Javier Barranco,
Michael Benedikt,
Maria Ilaria Besana,
Oscar Blanco Garcia,
Manuela Boscolo,
David Boutin,
Xavier Buffat,
Helmut Burkhardt,
Francesco Cerutti,
Antoine Chance,
Francesco Collamati,
Emilia Cruz-Alaniz,
Barbara Dalena,
Michael Hofer,
Barbara L. Humann,
Angelo Infantino,
Jacqueline Keintzel,
Andy Langner,
Marian Luckhof,
Roman Martin,
Tatiana Pieloni,
Haroon Rafique
, et al. (7 additional authors not shown)
Abstract:
The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insert…
▽ More
The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insertion region designs with a complete assessment of the main challenges, as collision debris with two orders of magnitude larger power than current colliders, beam-beam interactions in long insertions, dynamic aperture for optics with peak $β$ functions one order of magnitude above current colliders, photon background from synchrotron radiation and cross talk between the insertion regions. An alternative design avoiding the use of crab cavities with a small impact on performance is also presented.
△ Less
Submitted 23 July, 2020;
originally announced July 2020.
-
Imperfections and corrections
Authors:
R. Tomás,
X. Buffat,
J. Coello,
E. Fol,
L. Malina
Abstract:
The measurement and correction of optics parameters has been a major concern since the advent of strong focusing synchrotron accelerators. A review of typical imperfections in accelerator optics together with measurement and correction algorithms is given with emphasis on numerical implementations. Python examples are shown using existing libraries when possible.
The measurement and correction of optics parameters has been a major concern since the advent of strong focusing synchrotron accelerators. A review of typical imperfections in accelerator optics together with measurement and correction algorithms is given with emphasis on numerical implementations. Python examples are shown using existing libraries when possible.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
A twelve-quadrupole correction for the interaction regions of high-energy accelerators
Authors:
Javier Fernando Cardona,
Yohany Rodríguez,
Rogelio Tomás
Abstract:
Corrections of gradient errors in the interactions regions (IRs) of high energy colliders have traditionally been made by changing the strengths of quadrupoles that are common to both beams, such as the triplet quadrupoles. This article shows that magnetic errors in the IR quadrupoles that are no common to both beams, such as the matching quadrupoles, can have an important influence and, therefore…
▽ More
Corrections of gradient errors in the interactions regions (IRs) of high energy colliders have traditionally been made by changing the strengths of quadrupoles that are common to both beams, such as the triplet quadrupoles. This article shows that magnetic errors in the IR quadrupoles that are no common to both beams, such as the matching quadrupoles, can have an important influence and, therefore, the correction should also include these quadrupoles. A correction based on twelve IR quadrupoles (common and no common) is presented and validated through MADX simulations. To estimate the strengths of this correction, the action and phase in the inter-triplet space, the space that separates the two triplets of the IR, are required. A novel method to estimate these quantities is also presented. The main sources of uncertainties in this novel method are identified and compared to the current method that uses two beam position monitor within the inter-triplet space. Finally, LHC experimental data is used to estimate the strengths of a twelve-quadrupole correction in the interaction region 1 of the LHC. The resulting correction is compared with a six-quadrupole correction estimated with another method called segment-by-segment (SBS).
△ Less
Submitted 13 February, 2020;
originally announced February 2020.
-
Machine Layout and Performance
Authors:
D. Angal-Kalinin,
R. Appleby,
G. Arduini,
D. Banfi,
J. Barranco,
N. Biancacci,
D. Brett,
R. Bruce,
O. Bruening,
X. Buffat,
A. Burov,
Y. Cai,
R. Calaga,
A. Chancé,
M. Crouch,
B. Dalena,
H. Day,
R. de Maria,
J. Esteban Muller,
S. Fartoukh,
M. Fitterer,
O. Frasciello,
M. Giovannozzi,
W. Herr,
W. Höfle
, et al. (35 additional authors not shown)
Abstract:
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
2D-Oide effect
Authors:
O. R. Blanco,
R. Tomas,
P. Bambade
Abstract:
The Oide effect considers the synchrotron radiation in the final focusing quadrupole and it sets a lower limit on the vertical beam size at the Interaction Point, particularly relevant for high energy linear colliders. The theory of the Oide effect was derived considering only the radiation in the focusing plane of the magnet. This article addresses the theoretical calculation of the radiation eff…
▽ More
The Oide effect considers the synchrotron radiation in the final focusing quadrupole and it sets a lower limit on the vertical beam size at the Interaction Point, particularly relevant for high energy linear colliders. The theory of the Oide effect was derived considering only the radiation in the focusing plane of the magnet. This article addresses the theoretical calculation of the radiation effect on the beam size consider- ing both focusing and defocusing planes of the quadrupole, refered to as 2D-Oide. The CLIC 3 TeV final quadrupole (QD0) and beam parameters are used to compare the theoretical results from the Oide effect and the 2D-Oide effect with particle tracking in PLACET. The 2D-oide demonstrates to be important as it increases by 17% the contribution to the beam size. Further insight into the aberrations induced by the synchrotron radiation opens the possibility to partially correct the 2D-Oide effect with octupole magn
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
The FCC-ee study: Progress and challenges
Authors:
M. Koratzinos,
A. Blondel,
S. Aumon,
C. Cook,
A. Doblhammer,
B. Haerer,
B. Holzer,
R. Tomas,
F. Zimmermann,
U. Wienands,
L. Medina,
M. Boscolo,
A. Bogomyagkov,
D. Shatilov,
E. Levichev
Abstract:
The FCC (Future Circular Collider) study represents a vision for the next large project in high energy physics, comprising an 80-100 km tunnel that can house a future 100 TeV hadron collider. The study also includes a high luminosity e+e- collider operating in the centre-of-mass energy range of 90-350 GeV as a possible intermediate step, the FCC-ee. The FCC-ee aims at definitive electro-weak preci…
▽ More
The FCC (Future Circular Collider) study represents a vision for the next large project in high energy physics, comprising an 80-100 km tunnel that can house a future 100 TeV hadron collider. The study also includes a high luminosity e+e- collider operating in the centre-of-mass energy range of 90-350 GeV as a possible intermediate step, the FCC-ee. The FCC-ee aims at definitive electro-weak precision measurements of the Z, W, H and top particles, and search for rare phenomena. Although FCC-ee is based on known technology, the goal performance in luminosity and energy calibration make it quite challenging. During 2014 the study went through an exploration phase. The study has now entered its second year and the aim is to produce a conceptual design report during the next three to four years. We here report on progress since the last IPAC conference.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
Non-interleaved FFS design
Authors:
Oscar Blanco,
Rogelio Tomas,
Philip Bambade
Abstract:
The requirements on the Final Focusing System (FFS) for a new linear collider has lead to lattice designs where chromaticity is corrected either locally or non-locally. Here, we present the status of an alternative lattice design developed for the current CLIC 500GeV beam parameters where chromaticity is corrected upstream the Final Doublet (FD) and the geometrical components in the vertical plane…
▽ More
The requirements on the Final Focusing System (FFS) for a new linear collider has lead to lattice designs where chromaticity is corrected either locally or non-locally. Here, we present the status of an alternative lattice design developed for the current CLIC 500GeV beam parameters where chromaticity is corrected upstream the Final Doublet (FD) and the geometrical components in the vertical plane are corrected locally. The diagnose of this design showed to possible variations two the lattice : the second order dispersion and its derivative with respect to $s$ must be cancelled before the FD, or some dispersion must be tolerated at the sextupole located inside the FD.
△ Less
Submitted 1 April, 2015;
originally announced April 2015.
-
Experimental and Theoretical Progress of Linear Collider Final Focus Design and ATF2 Facility
Authors:
Andrei Seryi,
Rogelio Tomas,
Frank Zimmermann,
Kiyoshi Kubo,
Shigeru Kuroda,
Toshiyuki Okugi,
Toshiaki Tauchi,
Nobuhiro Terunuma,
Junji Urakawa,
Glen White,
Mark Woodley,
Deepa Angal-Kalinin
Abstract:
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
Impact of Detector Solenoid on the CLIC Luminosity Performance
Authors:
Yngve Inntjore Levinsen,
Barbara Dalena,
Rogelio Tomas,
Daniel Schulte
Abstract:
In order to obtain the necessary luminosity with a reasonable amount of beam power, the Compact Linear Collider (CLIC) design includes an unprecedented collision beam size of σ = 1 nm vertically and σ = 45 nm horizontally. Given the small and very flat beams, the luminosity can be significantly degraded from the impact of the experimental solenoid field in combination with a large crossing angle.…
▽ More
In order to obtain the necessary luminosity with a reasonable amount of beam power, the Compact Linear Collider (CLIC) design includes an unprecedented collision beam size of σ = 1 nm vertically and σ = 45 nm horizontally. Given the small and very flat beams, the luminosity can be significantly degraded from the impact of the experimental solenoid field in combination with a large crossing angle. Main effects include y-x'-coupling and increase of vertical dispersion. Additionally, Incoherent Synchrotron Radiation (ISR) from the orbit deflection created by the solenoid field, increases the beam emittance. A detailed study of the impact from a realistic solenoid field and the associated correction techniques for the CLIC Final Focus is presented. In particular, the impact of techniques to compensate the beam optics distortions due to the detector solenoid main field and its overlap with the final focus magnets are shown. The unrecoverable luminosity loss due to ISR has been evaluated, and found to be in the range 4-5 % for the solenoid design under study.
△ Less
Submitted 12 May, 2014; v1 submitted 5 December, 2013;
originally announced December 2013.
-
Proposal for Single-Bunch Collimator Wakefield Measurements at SLAC ESTB
Authors:
J. Resta-Lopez,
C. I. Clarke,
A. Faus-Golfe,
N. Fuster-Martinez,
C. Hast,
R. M. Jones,
A. Latina,
M. Pivi,
G. Rumolo,
D. Schulte,
J. Smith,
R. Tomas
Abstract:
Collimator wakefields in the Beam Delivery System (BDS) of future linear colliders, such as the International Linear Collider (ILC) and the Compact Linear Collider (CLIC), can be an important source of emittance growth and beam jitter amplification, consequently degrading the luminosity. Therefore, a better understanding of collimator wakefield effects is essential to optimise the collimation syst…
▽ More
Collimator wakefields in the Beam Delivery System (BDS) of future linear colliders, such as the International Linear Collider (ILC) and the Compact Linear Collider (CLIC), can be an important source of emittance growth and beam jitter amplification, consequently degrading the luminosity. Therefore, a better understanding of collimator wakefield effects is essential to optimise the collimation systems of future linear colliders in order to minimise wakefield effects. In the past, measurements of single-bunch collimator wakefields have been carried out at SLAC with the aim of benchmarking theory, numerical calculations and experiments. Those studies revealed some discrepancies between the measurements and the theoretical models. New experimental tests using available beam test facilities, such as the End Station A Test Beam (ESTB) at SLAC, would help to improve our understanding on collimator wakefields. ESTB will provide the perfect test bed to investigate collimator wakefields for different bunch length conditions, relevant for both ILC (300 micrometers nominal bunch length) and CLIC (44 micrometers nominal bunch length) studies. Here we propose to perform new experimental tests of collimator wakefield effects on electron/positron beams at SLAC ESTB.
△ Less
Submitted 25 December, 2012;
originally announced December 2012.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
BDS tuning and Luminosity Monitoring in CLIC
Authors:
B. Dalena,
J. Barranco,
A. Latina,
E. Marin,
J. Pfingstner,
D. Schulte,
J. Snuverink,
R. Tomas,
G. Zamudio
Abstract:
The emittance preservation in the Beam Delivery System (BDS) is one of the major challenges in CLIC. The fast detuning of the final focus optics requires an on-line tuning procedure in order to keep luminosity close to the maximum. Different tuning techniques have been applied to the CLIC BDS and in particular to the Final Focus System (FFS) in order to mitigate static and dynamic imperfections. S…
▽ More
The emittance preservation in the Beam Delivery System (BDS) is one of the major challenges in CLIC. The fast detuning of the final focus optics requires an on-line tuning procedure in order to keep luminosity close to the maximum. Different tuning techniques have been applied to the CLIC BDS and in particular to the Final Focus System (FFS) in order to mitigate static and dynamic imperfections. Some of them require a fast luminosity measurement. Here we study the possibility to use beam-beam backgrounds processes at CLIC 3 TeV CM energy as fast luminosity signal. In particular the hadrons multiplicity in the detector region is investigated.
△ Less
Submitted 2 February, 2012;
originally announced February 2012.
-
Status report of the baseline collimation system of CLIC. Part II
Authors:
J. Resta-Lopez,
D. Angal-Kalinin,
B. Dalena,
J. L. Fernandez-Hernando,
F. Jackson,
D. Schulte,
A. Seryi,
R. Tomas
Abstract:
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage…
▽ More
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part II is mainly dedicated to the study of the betatron collimation system and collimator wakefield effects.
△ Less
Submitted 13 April, 2011;
originally announced April 2011.
-
Status report of the baseline collimation system of CLIC. Part I
Authors:
J. Resta-Lopez,
D. Angal-Kalinin,
B. Dalena,
J. L. Fernandez-Hernando,
F. Jackson,
D. Schulte,
A. Seryi,
R. Tomas
Abstract:
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage…
▽ More
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part I of this report is dedicated to the study of the CLIC energy collimation system.
△ Less
Submitted 13 April, 2011;
originally announced April 2011.
-
Tomography of the Earth's Core Using Supernova Neutrinos
Authors:
Manfred Lindner,
Tommy Ohlsson,
Ricard Tomas,
Walter Winter
Abstract:
We investigate the possibility to use the neutrinos coming from a future galactic supernova explosion to perform neutrino oscillation tomography of the Earth's core. We propose to use existing or planned detectors, resulting in an additional payoff. Provided that all of the discussed uncertainties can be reduced as expected, we find that the average matter densities of the Earth's inner and oute…
▽ More
We investigate the possibility to use the neutrinos coming from a future galactic supernova explosion to perform neutrino oscillation tomography of the Earth's core. We propose to use existing or planned detectors, resulting in an additional payoff. Provided that all of the discussed uncertainties can be reduced as expected, we find that the average matter densities of the Earth's inner and outer cores could be measured with a precision competitive with geophysics. However, since seismic waves are more sensitive to matter density jumps than average matter densities, neutrino physics would give partly complementary information.
△ Less
Submitted 5 February, 2003; v1 submitted 19 July, 2002;
originally announced July 2002.