-
Designing a Photonic Physically Unclonable Function Having Resilience to Machine Learning Attacks
Authors:
Elena R. Henderson,
Jessie M. Henderson,
Hiva Shahoei,
William V. Oxford,
Eric C. Larson,
Duncan L. MacFarlane,
Mitchell A. Thornton
Abstract:
Physically unclonable functions (PUFs) are designed to act as device 'fingerprints.' Given an input challenge, the PUF circuit should produce an unpredictable response for use in situations such as root-of-trust applications and other hardware-level cybersecurity applications. PUFs are typically subcircuits present within integrated circuits (ICs), and while conventional IC PUFs are well-understoo…
▽ More
Physically unclonable functions (PUFs) are designed to act as device 'fingerprints.' Given an input challenge, the PUF circuit should produce an unpredictable response for use in situations such as root-of-trust applications and other hardware-level cybersecurity applications. PUFs are typically subcircuits present within integrated circuits (ICs), and while conventional IC PUFs are well-understood, several implementations have proven vulnerable to malicious exploits, including those perpetrated by machine learning (ML)-based attacks. Such attacks can be difficult to prevent because they are often designed to work even when relatively few challenge-response pairs are known in advance. Hence the need for both more resilient PUF designs and analysis of ML-attack susceptibility. Previous work has developed a PUF for photonic integrated circuits (PICs). A PIC PUF not only produces unpredictable responses given manufacturing-introduced tolerances, but is also less prone to electromagnetic radiation eavesdrop** attacks than a purely electronic IC PUF. In this work, we analyze the resilience of the proposed photonic PUF when subjected to ML-based attacks. Specifically, we describe a computational PUF model for producing the large datasets required for training ML attacks; we analyze the quality of the model; and we discuss the modeled PUF's susceptibility to ML-based attacks. We find that the modeled PUF generates distributions that resemble uniform white noise, explaining the exhibited resilience to neural-network-based attacks designed to exploit latent relationships between challenges and responses. Preliminary analysis suggests that the PUF exhibits similar resilience to generative adversarial networks, and continued development will show whether more-sophisticated ML approaches better compromise the PUF and -- if so -- how design modifications might improve resilience.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Long-legged Divertors and Neutral Baffling as a Solution to the Tokamak Power Exhaust Challenge
Authors:
K. Verhaegh,
J. R. Harrison,
D. Moulton,
B. Lipschultz,
N. Lonigro,
N. Osborne,
P. Ryan,
C. Theiler,
T. Wijkamp,
D. Brida,
C. Cowley,
G. Derks,
R. Doyle,
F. Federici,
B. Kool,
O. Février,
A. Hakola,
S. Henderson,
H. Reimerdes,
A. J. Thornton,
N. Vianello,
M. Wischmeier,
L. Xiang
Abstract:
Exhausting the power from the hot fusion core to the plasma facing components is one of fusion's biggest challenges. The MAST Upgrade tokamak uniquely integrates strong containment of neutrals within the exhaust area (divertor), away from the hot fusion core, with extreme divertor sha**. This enables improving power exhaust through long-legged divertors with a high magnetic field gradient (total…
▽ More
Exhausting the power from the hot fusion core to the plasma facing components is one of fusion's biggest challenges. The MAST Upgrade tokamak uniquely integrates strong containment of neutrals within the exhaust area (divertor), away from the hot fusion core, with extreme divertor sha**. This enables improving power exhaust through long-legged divertors with a high magnetic field gradient (total flux expansion). This study shows compelling MAST-U results for the improved power exhaust of long-legged, totally flux expanded, divertors, without any adverse impact to the hot fusion core, representing a significant step forward in addressing the fusion power exhaust challenge. Our comparative analysis of various divertor shapes demonstrates that even modest adjustments can significantly enhance exhaust performance while preserving core plasma performance. Through novel analysis, we attribute the reductions in particle and power loads to the expanded plasma-neutral interaction volume within long-legged divertors, in agreement with reduced models and simulation results. Strong segregation of neutrals enables the benefits of long-legged, totally flux expanded, divertors to be retrieved. Our study underscores the critical role of strategic divertor sha** in enhancing exhaust performance, stability and core-edge integration; signifying an essential advancement towards sustainable fusion energy.
△ Less
Submitted 14 June, 2024; v1 submitted 14 November, 2023;
originally announced November 2023.
-
The role of plasma-atom and molecule interactions on power \& particle balance during detachment on the MAST Upgrade Super-X divertor
Authors:
Kevin Verhaegh,
Bruce Lipschultz,
James Harrison,
Fabio Federici,
David Moulton,
Nicola Lonigro,
Stijn Kobussen,
Martin O'Mullane,
Nick Osborne,
Peter Ryan,
Tijs Wijkamp,
Bob Kool,
Effy Rose,
Christian Theiler,
Andrew Thornton
Abstract:
This paper shows first quantitative analysis of the detachment processes in the MAST Upgrade Super-X divertor (SXD). We identify an unprecedented impact of plasma-molecular interactions involving molecular ions (likely $D_2^+$), resulting in strong ion sinks (Molecular Activated Recombination - MAR), leading to a reduction of ion target flux. The MAR ion sinks exceed the divertor ion sources befor…
▽ More
This paper shows first quantitative analysis of the detachment processes in the MAST Upgrade Super-X divertor (SXD). We identify an unprecedented impact of plasma-molecular interactions involving molecular ions (likely $D_2^+$), resulting in strong ion sinks (Molecular Activated Recombination - MAR), leading to a reduction of ion target flux. The MAR ion sinks exceed the divertor ion sources before electron-ion recombination (EIR) starts to occur, suggesting that significant ionisation occurs outside of the divertor chamber. In the EIR region, $T_e \ll 0.2$ eV is observed and MAR remains significant in these deep detached phases. The total ion sink strength demonstrates the capability for particle (ion) exhaust in the Super-X Configuration.
Molecular Activated Dissociation (MAD) is the dominant volumetric neutral atom creation process can lead to an electron cooling of 20\% of $P_{SOL}$. The measured total radiative power losses \emph{in the divertor chamber} are consistent with inferred hydrogenic radiative power losses. This suggests that intrinsic divertor impurity radiation, despite the carbon walls, is minor in the divertor chamber. This contrasts previous TCV results, which may be associated with enhanced plasma-neutral interactions and reduced chemical erosion in the detached, tightly baffled SXD.
The above observations have also been observed in higher heat flux (narrower SOL width) type I ELMy H-mode discharges. This provides evidence that the characterisation in this paper may be general.
△ Less
Submitted 2 October, 2023; v1 submitted 18 April, 2023;
originally announced April 2023.
-
Shape matters: Competing mechanisms of particle shape segregation
Authors:
D. Hernández-Delfin,
D. R. Tunuguntla,
T. Weinhart,
R. C. Hidalgo,
A. R. Thornton
Abstract:
It is well-known that granular mixtures that differ in size or shape segregate when sheared. In the past, two mechanisms have been proposed to describe this effect, and it is unclear if both exist. To settle this question, we consider a bidisperse mixture of spheroids of equal volume in a rotating drum, where the two mechanisms are predicted to act in opposite directions. We present the first evid…
▽ More
It is well-known that granular mixtures that differ in size or shape segregate when sheared. In the past, two mechanisms have been proposed to describe this effect, and it is unclear if both exist. To settle this question, we consider a bidisperse mixture of spheroids of equal volume in a rotating drum, where the two mechanisms are predicted to act in opposite directions. We present the first evidence that there are two \emph{distinct} segregation mechanisms driven by relative \emph{over-stress}. Additionally, we showed that for non-spherical particles, these two mechanisms can act in different directions leading to a competition between the effects of the two. As a result, the segregation intensity varies non-monotonically as a function of $AR$, and at specific points, the segregation direction changes for both prolate and oblate spheroids, explaining the surprising segregation reversal previously reported. Consistent with previous results, we found that the kinetic mechanism is dominant for (almost) spherical particles. Furthermore, for moderate aspect ratios, the kinetic mechanism is responsible for the spherical particles segregation to the periphery of the drum, and the gravity mechanism plays only a minor role. Whereas, at the extreme values of $AR$, the gravity mechanism notably increases and overtakes its kinetic counterpart.
△ Less
Submitted 24 November, 2022;
originally announced November 2022.
-
Power exhaust and core-divertor compatibility of the baffled snowflake divertor in TCV
Authors:
Sophie Gorno,
Claudia Colandrea,
Olivier Février,
Holger Reimerdes,
Christian Theiler,
Basil P Duval,
Tilmann Lunt,
Harshita Raj,
Umar A Sheikh,
Luke Simons,
Andrew Thornton
Abstract:
A baffled Snowflake Minus Low-Field Side (SF-LFS) is geometrically-optimised in TCV, increasing divertor neutral pressure, to evaluate the roles of divertor closure (comparing with an unbaffled SF-LFS) and magnetic geometry (comparing with a baffled Single Null, SN) in power exhaust and core-divertor compatibility. Ohmically-heated L-mode discharges in deuterium, with a line-averaged core density…
▽ More
A baffled Snowflake Minus Low-Field Side (SF-LFS) is geometrically-optimised in TCV, increasing divertor neutral pressure, to evaluate the roles of divertor closure (comparing with an unbaffled SF-LFS) and magnetic geometry (comparing with a baffled Single Null, SN) in power exhaust and core-divertor compatibility. Ohmically-heated L-mode discharges in deuterium, with a line-averaged core density of approximately 4x10(19) m-3, are seeded with nitrogen to approach detached conditions. Baffles in the SF-LFS configuration are found to reduce the peak outer target heat flux by up to 23%, without significantly affecting the location of the inter-null radiation region or the core-divertor compatibility. When compared to the baffled SN, the baffled SF-LFS exhibits a reduction in outer target heat flux by up to 66% and the ability to balance the strike-point distribution of heat flux. These benefits are less significant with N2 seeding, with similar peak target quantities (such as heat flux, electron temperature and ion flux) and divertor radiated power. Despite a radiating region located farther from the confined plasma for the SF-LFS than the baffled SN, no change in core confinement is observed. Core effective charge even indicates an increase in core impurity penetration for the SF-LFS. These experiments constitute a good reference for detailed model validations and extrapolations, exploring important physics such as core impurity shielding and the dependence of divertor cross-field transport on magnetic geometry.
△ Less
Submitted 23 November, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Improved Heat and Particle Flux Mitigation in High Core Confinement, Baffled, Alternate Divertor Configurations in the TCV tokamak
Authors:
Harshita Raj,
C. Theiler,
A. Thornton,
O. Fevrier,
S. Gorno,
F. Bagnato,
P. Blanchard,
C. Colandrea,
H. de Oliveira,
B. P. Duval,
B. Labit,
A. Perek,
H. Reimerdes,
U. Sheikh,
M. Vallar,
B. Vincent
Abstract:
Nitrogen seeded detachment has been achieved in the Tokamak a Configuration Variable (TCV) in advanced divertor configurations (ADCs), namely X-divertor and X-point target, with and without baffles in H-mode plasmas with high core confinement. Both ADCs show a remarkable reduction in the inter-ELM particle and heat fluxes to the target compared to the standard divertor configuration. 95-98% of the…
▽ More
Nitrogen seeded detachment has been achieved in the Tokamak a Configuration Variable (TCV) in advanced divertor configurations (ADCs), namely X-divertor and X-point target, with and without baffles in H-mode plasmas with high core confinement. Both ADCs show a remarkable reduction in the inter-ELM particle and heat fluxes to the target compared to the standard divertor configuration. 95-98% of the peak heat flux to the target is mitigated as a synergetic effect of ADCs, baffling, and nitrogen seeded detachment. The effect of divertor geometry and baffles on core-divertor compatibility is investigated in detail. The power balance in these experiments is also investigated to explore the physics behind the observed reduction in heat fluxes in the ADCs.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
Spectroscopic investigations of detachment on the MAST Upgrade Super-X divertor
Authors:
Kevin Verhaegh,
Bruce Lipschultz,
James Harrison,
Nick Osborne,
Aelwyn Williams,
Peter Ryan,
James Clark,
Fabio Federici,
Bob Kool,
Tijs Wijkamp,
Alexandre Fil,
David Moulton,
Omkar Myatra,
Andrew Thornton,
Thomas Bosman,
Geof Cunningham,
Basil Duval,
Stuart Henderson,
Rory Scannell,
the MAST Upgrade team
Abstract:
We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downst…
▽ More
We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downstream. The plasma interacts with these molecules, resulting in molecular ions ($D_2^+$ and/or $D_2^- \rightarrow D + D^-$) that further react with the plasma leading to Molecular Activated Recombination and Dissociation (MAR and MAD), which results in excited atoms and significant Balmer line emission. Second, the MAR region detaches from the target leaving a sub-eV temperature region downstream. Third, an onset of strong emission from electron-ion recombination (EIR) ensues. Finally, the electron density decays near the target, resulting in a density front moving upstream.
The analysis in this paper indicates that plasma-molecule interactions have a larger impact than previously reported and play a critical role in the intensity and interpretation of hydrogen atomic line emission characteristics on MAST-U. Furthermore, we find that the Fulcher band emission profile in the divertor can be used as a proxy for the ionisation region and may also be employed as a plasma temperature diagnostic for improving the separation of hydrogenic emission arising from electron-impact excitation and that from plasma-molecular interactions.
We provide evidences for the presence of low electron temperatures ($<0.5$ eV) during detachment phases III-IV based on quantitative spectroscopy analysis, a Boltzmann relation of the high-n Balmer line transitions together with an analysis of the brightness of high-n Balmer lines.
△ Less
Submitted 18 October, 2022; v1 submitted 5 April, 2022;
originally announced April 2022.
-
Comparison between MAST-U conventional and Super-X configurations through SOLPS-ITER modelling
Authors:
Alexandre Fil,
Bruce Lipschultz,
David Moulton,
Andrew Thornton,
Ben Dudson,
Omkar Myatra,
Kevin Verhaegh,
EUROFusion MST1 team
Abstract:
MAST-U has recently started operating with a Super-X divertor, designed to increase total flux expansion and neutral trap**, both predicted through simple analytic models and SOLPS calculations to reduce the plasma and impurity density detachment thresholds. In this study, utilising the SOLPS-ITER code, we are quantifying the possible gain allowed by the MAST-U Super-X and neutral baffling geome…
▽ More
MAST-U has recently started operating with a Super-X divertor, designed to increase total flux expansion and neutral trap**, both predicted through simple analytic models and SOLPS calculations to reduce the plasma and impurity density detachment thresholds. In this study, utilising the SOLPS-ITER code, we are quantifying the possible gain allowed by the MAST-U Super-X and neutral baffling geometry, in terms of access to detachment. We show that a significant reduction of the upstream density detachment threshold (up to a factor 1.6) could be achieved in MAST-U, for the Super-X, as opposed to conventional divertor geometry, mainly through an increased total flux expansion, neutral trap** being found very similar between the different configurations. We also show that variations of the strike-point angle are complex to interpret in such a tightly baffled geometry, and that a case in which the target normal points more towards the separatrix does not necessarily imply a lower detachment threshold. As in previous calculations for TCV, we quantify the role of neutral effects through develo** and applying a quantitative definition of neutral trap**.
△ Less
Submitted 13 July, 2022; v1 submitted 25 February, 2022;
originally announced February 2022.
-
Segregation of large particles in dense granular flows: A granular Saffman effect?
Authors:
Kasper van der Vaart,
Marnix P. van Schrojenstein Lantman,
Thomas Weinhart,
Stefan Luding,
Christophe Ancey,
Anthony R. Thornton
Abstract:
We report on the scaling between the lift force and the velocity lag experienced by a single particle of different size in a monodisperse dense granular chute flow. The similarity of this scaling to the Saffman lift force in (micro) fluids, suggests an inertial origin for the lift force responsible for segregation of (isolated, large) intruders in dense granular flows. We also observe an anisotrop…
▽ More
We report on the scaling between the lift force and the velocity lag experienced by a single particle of different size in a monodisperse dense granular chute flow. The similarity of this scaling to the Saffman lift force in (micro) fluids, suggests an inertial origin for the lift force responsible for segregation of (isolated, large) intruders in dense granular flows. We also observe an anisotropic pressure/stress field surrounding the particle, which potentially lies at the origin of the velocity lag. These findings are relevant for modelling and theoretical predictions of particle-size segregation. At the same time, the suggested interplay between polydispersity and inertial effects in dense granular flows with stress- and strain-gradients, implies striking new parallels between fluids, suspensions and granular flows with wide application perspectives.
△ Less
Submitted 4 June, 2018; v1 submitted 18 May, 2017;
originally announced May 2017.
-
Overview of recent physics results from MAST
Authors:
A Kirk,
J Adamek,
RJ Akers,
S Allan,
L Appel,
F Arese Lucini,
M Barnes,
T Barrett,
N Ben Ayed,
W Boeglin,
J Bradley,
P K Browning,
J Brunner,
P Cahyna,
M Carr,
F Casson,
M Cecconello,
C Challis,
IT Chapman,
S Chapman,
S Conroy,
N Conway,
WA Cooper,
M Cox,
N Crocker
, et al. (138 additional authors not shown)
Abstract:
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbu…
▽ More
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbulence. At the edge detailed studies have revealed how filament characteristic are responsible for determining the near and far SOL density profiles. In the core the intrinsic rotation and electron scale turbulence have been measured. The role that the fast ion gradient has on redistributing fast ions through fishbone modes has led to a redesign of the neutral beam injector on MAST Upgrade. In H-mode the turbulence at the pedestal top has been shown to be consistent with being due to electron temperature gradient modes. A reconnection process appears to occur during ELMs and the number of filaments released determines the power profile at the divertor. Resonant magnetic perturbations can mitigate ELMs provided the edge peeling response is maximised and the core kink response minimised. The mitigation of intrinsic error fields with toroidal mode number n>1 has been shown to be important for plasma performance.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
L-mode filament characteristics on MAST as a function of plasma current measured using visible imaging
Authors:
A. Kirk,
A. J. Thornton,
J. R. Harrison,
F. Militello,
N. R. Walkden
Abstract:
Clear filamentary structures are observed at the edge of tokamak plasmas. These filaments are ejected out radially and carry plasma in the far Scrape Off Layer (SOL) region, where they are responsible for producing most of the transport. A study has been performed of the characteristics of the filaments observed in L-mode plasma on MAST, using visible imaging. A comparison has then been made with…
▽ More
Clear filamentary structures are observed at the edge of tokamak plasmas. These filaments are ejected out radially and carry plasma in the far Scrape Off Layer (SOL) region, where they are responsible for producing most of the transport. A study has been performed of the characteristics of the filaments observed in L-mode plasma on MAST, using visible imaging. A comparison has then been made with the observed particle and power profiles obtained at the divertor as a function of the plasma current. The radial velocity and to a lesser extent the radial size of the filaments are found to decrease as the plasma current is increased at constant density and input power. The results obtained in this paper on the dependence of the average filament dynamics on plasma current are consistent with the idea that the filaments are responsible for determining the particle profiles at the divertor.
△ Less
Submitted 9 February, 2016;
originally announced February 2016.
-
Scrape-off layer ion temperature measurements at the divertor target during type III and type I ELMs in MAST measured by RFEA
Authors:
S. Elmore,
S. Y. Allan,
G. Fishpool,
A. Kirk,
A. J. Thornton,
N. R. Walkden,
J. R. Harrison
Abstract:
In future nuclear fusion reactors high heat load events, such as edge-localised modes (ELMs), can potentially damage divertor materials and release impurities into the main plasma, limiting plasma performance. The most difficult to handle are type I ELMs since they carry the largest fraction of energy from the plasma and therefore deposit the largest heat flux at the target and on first wall mater…
▽ More
In future nuclear fusion reactors high heat load events, such as edge-localised modes (ELMs), can potentially damage divertor materials and release impurities into the main plasma, limiting plasma performance. The most difficult to handle are type I ELMs since they carry the largest fraction of energy from the plasma and therefore deposit the largest heat flux at the target and on first wall materials. Knowing the temperature of the ions released from ELM events is important since it determines the potential sputtering they would cause from plasma facing materials. To make measurements of Ti by retarding field energy analyser (RFEA) during type I ELMs a new operational technique has been used to allow faster measurements to be made; this is called the fast swept technique (FST).
△ Less
Submitted 9 February, 2016;
originally announced February 2016.
-
Modelling of spatial structure of divertor footprints caused by edge-localized modes mitigated by magnetic perturbations
Authors:
Pavel Cahyna,
Marina Becoulet,
Guido T. A. Huijsmans,
Francois Orain,
Jorge Morales,
Andrew Kirk,
Andrew J. Thornton,
Stanislas Pamela,
Radomir Panek,
Matthias Hoelzl
Abstract:
Resonant magnetic perturbations (RMPs) can mitigate the edge-localized modes (ELMs), i.e. cause a change of the ELM character towards smaller energy loss and higher frequency. During mitigation a change of the spatial structure of ELM loads on divertor was observed on DIII-D and MAST: the power is deposited predominantly in the footprint structures formed by the magnetic perturbation. In the prese…
▽ More
Resonant magnetic perturbations (RMPs) can mitigate the edge-localized modes (ELMs), i.e. cause a change of the ELM character towards smaller energy loss and higher frequency. During mitigation a change of the spatial structure of ELM loads on divertor was observed on DIII-D and MAST: the power is deposited predominantly in the footprint structures formed by the magnetic perturbation. In the present contribution we develop a theory explaining this effect, based on the idea that part of the ELM loss is caused by parallel transport in the homoclinic tangle formed by the magnetic perturbation of the ELM. The modified tangle resulting from the combination of the ELM perturbation and the applied RMP has the expected property of bringing open field lines in the same areas as the tangle from the RMP alone. We show that this explanation is consistent with features of the mitigated ELMs on MAST.
We in addition validated our theory by an analysis of simulations of mitigated ELMs using the code JOREK. We produced detailed laminar plots of field lines on the divertor in the JOREK runs with an ELM, an applied RMP, and an ELM mitigated by the presence of the RMP. The results for an ELM clearly show a high-n rotating footprint structure appearing during the nonlinear stage of the ELM, which is not present in the early stage of the ELM. The results for a n=2 RMP from the ELM control coils show the expected n=2 footprint structure. The results for the mitigated ELM show a similar structure, modulated by a higher n perturbation of the ELM, consistent with our theory.
△ Less
Submitted 12 January, 2016;
originally announced January 2016.
-
Pellet refuelling of particle loss due to ELM mitigation with RMPs in the ASDEX Upgrade tokamak at low collisionality
Authors:
M Valovič,
P T Lang,
A Kirk,
W Suttrop,
M Cavedon,
L R Fischer,
L Garzotti,
L Guimarais,
G Kocsis,
G Cseh,
B Plőckl,
T Szepesi,
A Thornton,
A Mlynek,
G Tardini,
E Viezzer,
R Scannell,
E Wolfrum,
the ASDEX Upgrade team,
the EUROfusion MST1 team
Abstract:
The complete refuelling of the plasma density loss (pump-out) caused by mitigation of Edge Localised Modes (ELMs) is demonstrated on the ASDEX Upgrade tokamak. The plasma is refuelled by injection of frozen deuterium pellets and ELMs are mitigated by external resonant magnetic perturbations (RMPs). In this experiment relevant dimensionless parameters, such as relative pellet size, relative RMP amp…
▽ More
The complete refuelling of the plasma density loss (pump-out) caused by mitigation of Edge Localised Modes (ELMs) is demonstrated on the ASDEX Upgrade tokamak. The plasma is refuelled by injection of frozen deuterium pellets and ELMs are mitigated by external resonant magnetic perturbations (RMPs). In this experiment relevant dimensionless parameters, such as relative pellet size, relative RMP amplitude and pedestal collisionality are kept at the ITER like values. Refuelling of density pump out requires a factor of two increase of nominal fuelling rate. Energy confinement and pedestal temperatures are not restored to pre-RMP values by pellet refuelling.
△ Less
Submitted 7 October, 2015;
originally announced October 2015.
-
Characterisation of the L-mode Scrape Off Layer in MAST: decay lengths
Authors:
F. Militello,
L. Garzotti,
J. Harrison,
J. T. Omotani,
R. Scannell,
S. Allan,
A. Kirk,
I. Lupelli,
A. J. Thornton,
the MAST team
Abstract:
This work presents a detailed characterisation of the MAST Scrape Off Layer in L-mode. Scans in line averaged density, plasma current and toroidal magnetic field were performed. A comprehensive and integrated study of the SOL was allowed by the use of a wide range of diagnostics. In agreement with previous results, an increase of the line averaged density induced a broadening of the midplane densi…
▽ More
This work presents a detailed characterisation of the MAST Scrape Off Layer in L-mode. Scans in line averaged density, plasma current and toroidal magnetic field were performed. A comprehensive and integrated study of the SOL was allowed by the use of a wide range of diagnostics. In agreement with previous results, an increase of the line averaged density induced a broadening of the midplane density profile.
△ Less
Submitted 15 June, 2015;
originally announced June 2015.
-
Granular flow over inclined channels with linear contraction
Authors:
D. R. Tunuguntla,
T. Weinhart,
A. R. Thornton,
O. Bokhove
Abstract:
We consider dry granular flow down an inclined chute with a localised contraction theoretically and numerically. The flow regimes are predicted through a novel extended one-dimensional hydraulic theory. A discrete particle method validated empirical constitutive law is used to close this one-dimensional asymptotic model. The one-dimensional model is verified by solving the two-dimensional shallow…
▽ More
We consider dry granular flow down an inclined chute with a localised contraction theoretically and numerically. The flow regimes are predicted through a novel extended one-dimensional hydraulic theory. A discrete particle method validated empirical constitutive law is used to close this one-dimensional asymptotic model. The one-dimensional model is verified by solving the two-dimensional shallow granular equations through discontinuous Galerkin finite element method (DGFEM). For supercritical flows, the one-dimensional asymptotic theory surprisingly holds although the two-dimensional oblique granular jumps largely vary across the converging channel.
△ Less
Submitted 17 April, 2015; v1 submitted 3 April, 2015;
originally announced April 2015.
-
The Influence of Filaments in the Private Flux Region on Divertor Particle and Power Deposition
Authors:
J. R. Harrison,
G. M. Fishpool,
A. J. Thornton,
N. R. Walkden,
the MAST team
Abstract:
The transport of particles via intermittent filamentary structures in the private flux region of plasmas in the MAST tokamak has been investigated using a fast framing camera recording visible light emission from the volume of the lower divertor, as well as Langmuir probes and IR thermography monitoring particle and power fluxes to plasma-facing surfaces in the divertor. The visible camera data su…
▽ More
The transport of particles via intermittent filamentary structures in the private flux region of plasmas in the MAST tokamak has been investigated using a fast framing camera recording visible light emission from the volume of the lower divertor, as well as Langmuir probes and IR thermography monitoring particle and power fluxes to plasma-facing surfaces in the divertor. The visible camera data suggests that, in the divertor volume, fluctuations in light emission above the X-point are strongest in the scrape-off layer (SOL). Conversely, in the region below the X-point, it is found that these fluctuations are strongest in the private flux region (PFR) of the inner divertor leg. Detailed analysis of the appearance of these filaments in the camera data suggests that they are approximately circular, around 1-2cm in diameter. The most probable toroidal mode number is between 2 and 3. These filaments eject plasma deeper into the private flux region, sometimes by the production of secondary filaments, moving at a speed of 0.5-1.0km/s. Probe measurements at the inner divertor target suggest that the fluctuations in the particle flux to the inner target are strongest in the private flux region, and that the amplitude and distribution of these fluctuations are insensitive to the electron density of the core plasma, auxiliary heating and whether the plasma is single-null or double-null. It is found that the e-folding width of the time-average particle flux in the PFR decreases with increasing plasma current, but the fluctuations are unchanged. At the outer divertor target, the fluctuations in particle and power fluxes are strongest in the SOL.
△ Less
Submitted 12 March, 2015;
originally announced March 2015.
-
Effect of resonant magnetic perturbations on low collisionality discharges in MAST and a comparison with ASDEX Upgrade
Authors:
A. Kirk,
W. Suttrop,
Yueqiang Liu,
I. T. Chapman,
P. Cahyna,
T. Eich,
C. Fuchs,
C. Ham,
J. R. Harrison,
M W. Jakubowski,
S. Pamela,
M. Peterka,
D. Ryan,
S. Saarelma,
R. Scannell,
A. J. Thornton,
M. Valovic,
B. Sieglin,
L. Barrera Orte,
M. Willensdorfer,
B. Kurzan,
R. Fischer
Abstract:
Sustained ELM mitigation has been achieved on MAST and AUG using RMPs with a range of toroidal mode numbers over a wide region of low to medium collisionality discharges. The ELM energy loss and peak heat loads at the divertor targets have been reduced. The ELM mitigation phase is typically associated with a drop in plasma density and overall stored energy. In one particular scenario on MAST, by c…
▽ More
Sustained ELM mitigation has been achieved on MAST and AUG using RMPs with a range of toroidal mode numbers over a wide region of low to medium collisionality discharges. The ELM energy loss and peak heat loads at the divertor targets have been reduced. The ELM mitigation phase is typically associated with a drop in plasma density and overall stored energy. In one particular scenario on MAST, by carefully adjusting the fuelling it has been possible to counteract the drop in density and to produce plasmas with mitigated ELMs, reduced peak divertor heat flux and with minimal degradation in pedestal height and confined energy. While the applied resonant magnetic perturbation field can be a good indicator for the onset of ELM mitigation on MAST and AUG there are some cases where this is not the case and which clearly emphasise the need to take into account the plasma response to the applied perturbations. The plasma response calculations show that the increase in ELM frequency is correlated with the size of the edge peeling-tearing like response of the plasma and the distortions of the plasma boundary in the X-point region.
△ Less
Submitted 24 December, 2014;
originally announced December 2014.
-
Impact of Resonant Magnetic Perturbations on the L-H Transition on MAST
Authors:
R. Scannell,
A. Kirk,
M. Carr,
J. Hawke,
S. S. Henderson,
T. O'Gorman,
A. Patel,
A. Shaw,
A. Thornton,
the MAST Team
Abstract:
The impact of resonant magnetic perturbations (RMPs) on the power required to access H-mode is examined experimentally on MAST. Applying RMP in n=2,3,4 and 6 configurations causes significant delays to the timing of the L-H transition at low applied fields and prevents the transition at high fields. The experiment was primarily performed at RMP fields sufficient to cause moderate increases in ELM…
▽ More
The impact of resonant magnetic perturbations (RMPs) on the power required to access H-mode is examined experimentally on MAST. Applying RMP in n=2,3,4 and 6 configurations causes significant delays to the timing of the L-H transition at low applied fields and prevents the transition at high fields. The experiment was primarily performed at RMP fields sufficient to cause moderate increases in ELM frequency, f mitigated/f natural~3. To obtain H-mode with RMPs at this field, an increase of injected beam power is required of at least 50% for n=3 and n=4 RMP and 100% for n=6 RMP. In terms of power threshold, this corresponds to increases of at least 20% for n=3 and n=4 RMPs and 60% for n=6 RMPs. This 'RMP affected' power threshold is found to increase with RMP magnitude above a certain minimum perturbed field, below which there is no impact on the power threshold. Extrapolations from these results indicate large increases in the L-H power threshold will be required for discharges requiring large mitigated ELM frequency.
△ Less
Submitted 12 December, 2014;
originally announced December 2014.
-
ELM mitigation via rotating resonant magnetic perturbations on MAST
Authors:
A. J. Thornton,
A. Kirk,
P. Cahyna,
I. T. Chapman,
G. Fishpool,
J. R. Harrison,
Y. Q. Liu,
L. Kripner,
M. Peterka,
the MAST Team
Abstract:
The application of resonant magnetic perturbations (RMPs) produces splitting of the divertor strike point due to the interaction of the RMP field and the plasma field. The application of a rotating RMP field causes the strike point splitting to rotate, distributing the particle and heat flux evenly over the divertor. The RMP coils in MAST have been used to generate a rotating perturbation with a t…
▽ More
The application of resonant magnetic perturbations (RMPs) produces splitting of the divertor strike point due to the interaction of the RMP field and the plasma field. The application of a rotating RMP field causes the strike point splitting to rotate, distributing the particle and heat flux evenly over the divertor. The RMP coils in MAST have been used to generate a rotating perturbation with a toroidal mode number n=3. The ELM frequency is doubled with the application of the RMP rotating field, whilst maintaining the H mode. During mitigation, the ELM peak heat flux is seen to be reduced by 50% for a halving in the ELM energy and motion of the strike point, consistent with the rotation of the applied RMP field, is seen using high spatial resolution (1.5mm at the target) heat flux profiles measured using infrared (IR) thermography.
△ Less
Submitted 9 October, 2014;
originally announced October 2014.
-
Dependence of intrinsic rotation reversals on collisionality in MAST
Authors:
J. C. Hillesheim,
F. I. Parra,
M. Barnes,
N. A. Crocker,
H. Meyer,
W. A. Peebles,
R. Scannell,
A. Thornton,
the MAST Team
Abstract:
Tokamak plasmas rotate even without external injection of momentum. A Doppler backscattering system installed at MAST has allowed this intrinsic rotation to be studied in Ohmic L-mode and H-mode plasmas, including the first observation of intrinsic rotation reversals in a spherical tokamak. Experimental results are compared to a novel 1D model, which captures the collisionality dependence of the r…
▽ More
Tokamak plasmas rotate even without external injection of momentum. A Doppler backscattering system installed at MAST has allowed this intrinsic rotation to be studied in Ohmic L-mode and H-mode plasmas, including the first observation of intrinsic rotation reversals in a spherical tokamak. Experimental results are compared to a novel 1D model, which captures the collisionality dependence of the radial transport of toroidal angular momentum due to the effect of neoclassical flows on turbulent fluctuations. The model is able to accurately reproduce the change in sign of core toroidal rotation, using experimental density and temperature profiles from shots with rotation reversals as inputs and no free parameters fit to experimental data.
△ Less
Submitted 10 February, 2015; v1 submitted 8 July, 2014;
originally announced July 2014.
-
Pellet fuelling with edge-localised modes controlled by external magnetic perturbations in MAST
Authors:
M Valovic,
L Garzotti,
C Gurl,
A Kirk,
D Dunai,
A R Field,
I Lupelli,
G Naylor,
A Thornton
Abstract:
The fuelling of plasmas by shallow frozen pellets with simultaneous mitigation of edge localised modes (ELM) by external magnetic perturbation is demonstrated on the MAST tokamak. Post-pellet particle loss is dominated by ELMs and inter-ELM gas fuelling. It is shown that the size of post-pellet ELMs can be controlled by external magnetic perturbations. Post-pellet ELMs remove particles from the la…
▽ More
The fuelling of plasmas by shallow frozen pellets with simultaneous mitigation of edge localised modes (ELM) by external magnetic perturbation is demonstrated on the MAST tokamak. Post-pellet particle loss is dominated by ELMs and inter-ELM gas fuelling. It is shown that the size of post-pellet ELMs can be controlled by external magnetic perturbations. Post-pellet ELMs remove particles from the large part of pellet deposition zone including the area with positive density gradient. The mechanism explaining this peculiarity of particle loss is suggested.
△ Less
Submitted 2 July, 2014;
originally announced July 2014.
-
Scaling of the scrape-off layer width during inter-ELM H modes on MAST as measured by infrared thermography
Authors:
A. J. Thornton,
A. Kirk,
MAST Team
Abstract:
The power load to the divertor surfaces is a key concern for future devices such as ITER, due to the thermal limits on the material surface. One factor that characterizes the heat flux to the divertor is the fall off length in the scrape-off layer (SOL), which recent empirical scalings have shown could be as small as 1 mm. These predictions are based on a multi-machine scaling of the heat flux wid…
▽ More
The power load to the divertor surfaces is a key concern for future devices such as ITER, due to the thermal limits on the material surface. One factor that characterizes the heat flux to the divertor is the fall off length in the scrape-off layer (SOL), which recent empirical scalings have shown could be as small as 1 mm. These predictions are based on a multi-machine scaling of the heat flux width fitted using an expression for the divertor heat flux profile which includes a term for the exponential decay in the SOL and diffusion about the last closed flux surface (LCFS) in the private flux region.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Low-frequency oscillations in narrow vibrated granular systems
Authors:
Nicolas Rivas,
Stefan Luding,
Anthony R Thornton
Abstract:
We present simulations and a theoretical treatment of vertically vibrated granular media. The systems considered are confined in narrow quasi-two-dimensional and quasi-one-dimensional (column) geometries, where the vertical extension of the container is much larger than both horizontal lengths. The additional geometric constraint present in the column setup frustrates the convection state that is…
▽ More
We present simulations and a theoretical treatment of vertically vibrated granular media. The systems considered are confined in narrow quasi-two-dimensional and quasi-one-dimensional (column) geometries, where the vertical extension of the container is much larger than both horizontal lengths. The additional geometric constraint present in the column setup frustrates the convection state that is normally observed in wider geometries. This makes it possible to study collective oscillations of the grains with a characteristic frequency that is much lower than the frequency of energy injection. The frequency and amplitude of these oscillations are studied as a function of the energy input parameters and the size of the container. We observe that, in the quasi-two-dimensional setup, low-frequency oscillations are present even in the convective regime. This suggests that they may play a significant role in the transition from a density inverted state to convection. Two models are also presented; the first one, based on Cauchy's equations, is able to predict with high accuracy the frequency of the particles' collective motion. This first principles model requires a single input parameter, i.e, the centre of mass of the system. The model shows that a sufficient condition for the existence of the low-frequency mode is an inverted density profile with distinct low and high density regions, a condition that may apply to other systems too. The second, simpler model just assumes an harmonic oscillator like behaviour and, using thermodynamic arguments, is also able to reproduce the observed frequencies with high accuracy.
△ Less
Submitted 7 October, 2013;
originally announced October 2013.
-
The effect of resonant magnetic perturbations on the divertor heat and particle fluxes in MAST
Authors:
A. J. Thornton,
A. Kirk,
P. Cahyna,
I. T. Chapman,
J. R. Harrison,
Yueqiang Liu,
MAST Team
Abstract:
Edge localised modes (ELMs) are a concern for future devices, such as ITER, due to the large transient heat loads they generate on the divertor surfaces which could limit the operational time of the device. This paper discusses the application of resonant magnetic perturbations (RMPs) as a mechanism for ELM control on MAST. Experiments have been performed using an n=3 toroidal mode number perturba…
▽ More
Edge localised modes (ELMs) are a concern for future devices, such as ITER, due to the large transient heat loads they generate on the divertor surfaces which could limit the operational time of the device. This paper discusses the application of resonant magnetic perturbations (RMPs) as a mechanism for ELM control on MAST. Experiments have been performed using an n=3 toroidal mode number perturbation and measurements of the strike point splitting performed. The measurements have been made using both infrared and visible imaging to measure the heat and particle flux to the divertor. The measured profiles have shown clear splitting in L-mode which compares well with the predication of the splitting location from modelling including the effect of screening. The splitting of the strike point has also been studied as a function of time during the ELM. The splitting varies during the ELM, being the strongest at the time of the peak heat flux and becoming more filamentary at the end of the ELM (200 microseconds after the peak midplane D(alpha) emission). Variation in the splitting profiles has also been seen, with some ELMs showing clear splitting and others no splitting. A possible explanation of this effect is proposed, and supported by modelling, which concerns the relative phase between the RMP field and the ELM filament location.
△ Less
Submitted 11 June, 2014; v1 submitted 9 July, 2013;
originally announced July 2013.
-
Characteristics of X-point Lobe Structures in Single-Null Discharges on MAST
Authors:
J. R. Harrison,
A. Kirk,
I. T. Chapman,
P. Cahyna,
Yueqiang Liu,
E. Nardon,
A. J. Thornton
Abstract:
Lobe structures due to the application of resonant magnetic perturbations (RMPs) have been observed using wide-angle imaging of light from He1+ ions in the vicinity of the lower X-point in MAST. The data presented are from lower single-null discharges where RMPs of toroidal mode number, n, of 4 and 6 were applied. It has been found that, above a threshold value, the lobe structures extend radially…
▽ More
Lobe structures due to the application of resonant magnetic perturbations (RMPs) have been observed using wide-angle imaging of light from He1+ ions in the vicinity of the lower X-point in MAST. The data presented are from lower single-null discharges where RMPs of toroidal mode number, n, of 4 and 6 were applied. It has been found that, above a threshold value, the lobe structures extend radially, linearly with the coil current, both in L-mode and H-mode. It is observed that after the application of the RMP, as the toroidal rotation in the confined plasma decreases, the lobes extend radially, suggesting the plasma is less effectively screening the RMP field. Comparing the imaging data with results from vacuum modelling shows that this technique can accurately predict the number and poloidal location of the lobes, but over-estimates their radial extent. More accurate estimates of the extent of the lobes can be made by accounting for plasma screening of the RMP field. Qualitative agreement between simulation and experiment is found if it is assumed that the RMP penetrates 2% in normalised radius from the last closed flux surface.
△ Less
Submitted 5 July, 2013;
originally announced July 2013.
-
Scrape-off layer ion temperature measurements at the divertor target in MAST by retarding field energy analyser
Authors:
S. Elmore,
S. Y. Allan,
A. Kirk,
A. J. Thornton,
J. R. Harrison,
P. Tamain,
M. Kocan,
J. W. Bradley,
MAST Team
Abstract:
Knowledge of the ion temperature (Ti) is of key importance for determining heat fluxes to the divertor and plasma facing components, however data regarding this is limited compared to electron temperature (Te) data. Ti measurements at the divertor target, between edge-localised modes (inter-ELM) H-mode, have been made using a novel retarding field energy analyser (RFEA).
Knowledge of the ion temperature (Ti) is of key importance for determining heat fluxes to the divertor and plasma facing components, however data regarding this is limited compared to electron temperature (Te) data. Ti measurements at the divertor target, between edge-localised modes (inter-ELM) H-mode, have been made using a novel retarding field energy analyser (RFEA).
△ Less
Submitted 5 July, 2013;
originally announced July 2013.
-
Understanding the effect resonant magnetic perturbations have on ELMs
Authors:
A. Kirk,
I. T. Chapman,
T. E. Evans,
C. Ham,
J. R. Harrison,
G. Huijsmans,
Y. Liang,
Y. Q. Liu,
A. Loarte,
W. Suttrop,
A. J. Thornton
Abstract:
All current estimations of the energy released by type I ELMs indicate that, in order to ensure an adequate lifetime of the divertor targets on ITER, a mechanism is required to decrease the amount of energy released by an ELM, or to eliminate ELMs altogether. One such amelioration mechanism relies on perturbing the magnetic field in the edge plasma region, either leading to more frequent, smaller…
▽ More
All current estimations of the energy released by type I ELMs indicate that, in order to ensure an adequate lifetime of the divertor targets on ITER, a mechanism is required to decrease the amount of energy released by an ELM, or to eliminate ELMs altogether. One such amelioration mechanism relies on perturbing the magnetic field in the edge plasma region, either leading to more frequent, smaller ELMs (ELM mitigation) or ELM suppression. This technique of Resonant Magnetic Perturbations (RMPs) has been employed to suppress type I ELMs at high collisionality/density on DIII-D, ASDEX Upgrade, KSTAR and JET and at low collisionality on DIII-D. At ITER-like collisionality the RMPs enhance the transport of particles or energy and keep the edge pressure gradient below the 2D linear ideal MHD critical value that would trigger an ELM, whereas at high collisionality/density the type I ELMs are replaced by small type II ELMs. Although ELM suppression only occurs within limitied operational ranges, ELM mitigation is much more easily achieved. The exact parameters that determine the onset of ELM suppression are unknown but in all cases the magnetic perturbations produce 3D distortions to the plasma and enhanced particle transport. The incorporation of these 3D effects in codes will be essential in order to make quantitative predictions for future devices.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
-
Divertor heat fluxes and profiles during mitigated and unmitigated Edge Localised Modes (ELMs) on the Mega Amp Spherical Tokamak (MAST)
Authors:
A. J. Thornton,
A. Kirk,
I. T. Chapman,
J. R. Harrison,
the MAST Team
Abstract:
Edge localised modes (ELMs) are a concern for future devices as they can limit the operational lifetime of the divertor. The mitigation of ELMs can be performed by the application of resonant magnetic perturbations (RMPs) which act to degrade the pressure gradient in the edge of the plasma. Investigations of the effect of RMPs on MAST have been performed in a range of plasmas using perturbations w…
▽ More
Edge localised modes (ELMs) are a concern for future devices as they can limit the operational lifetime of the divertor. The mitigation of ELMs can be performed by the application of resonant magnetic perturbations (RMPs) which act to degrade the pressure gradient in the edge of the plasma. Investigations of the effect of RMPs on MAST have been performed in a range of plasmas using perturbations with toroidal mode numbers of n=3, 4 and 6. It has been seen that the RMPs increase the ELM frequency, which gives rise to a corresponding decrease in the ELM energy. The reduced ELM energy decreases the peak heat flux to the divertor, with a three fold reduction in the ELM energy, generating a 1.5 fold reduction in the peak heat flux. Measurements of the divertor heat flux profile show evidence of strike point splitting consistent with modelling using the vacuum code ERGOS.
△ Less
Submitted 27 June, 2013;
originally announced June 2013.
-
Understanding ELM mitigation by resonant magnetic perturbations on MAST
Authors:
A. Kirk,
I. T. Chapman,
Yueqiang Liu,
P. Cahyna,
P. Denner,
G. Fishpool,
C. J. Ham,
J. R. Harrison,
Yunfeng Liang,
E. Nardon,
S. Saarelma,
R. Scannell,
A. J. Thornton,
the MAST team
Abstract:
Sustained ELM mitigation has been achieved using RMPs with a toroidal mode number of n=4 and n=6 in lower single null and with n=3 in connected double null plasmas on MAST. The ELM frequency increases by up to a factor of eight with a similar reduction in ELM energy loss. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately linearly with current…
▽ More
Sustained ELM mitigation has been achieved using RMPs with a toroidal mode number of n=4 and n=6 in lower single null and with n=3 in connected double null plasmas on MAST. The ELM frequency increases by up to a factor of eight with a similar reduction in ELM energy loss. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately linearly with current in the coils. A comparison of the filament structures observed during the ELMs in the natural and mitigated stages shows that the mitigated ELMs have the characteristics of type I ELMs even though their frequency is higher, their energy loss is reduced and the pedestal pressure gradient is decreased. During the ELM mitigated stage clear lobe structures are observed in visible-light imaging of the X-point region. The size of these lobes is correlated with the increase in ELM frequency observed. The RMPs produce a clear 3D distortion to the plasma and it is likely that these distortions explain why ELMs are destabilised and hence why ELM mitigation occurs.
△ Less
Submitted 20 June, 2013;
originally announced June 2013.
-
Towards understanding edge localised mode mitigation by resonant magnetic perturbations in MAST
Authors:
I. T. Chapman,
A. Kirk,
C. J. Ham,
J. R. Harrison,
Y. Q. Liu,
S. Saarelma,
R. Scannell,
A. J. Thornton,
M. Becoulet,
F. Orain,
W. A. Cooper,
S. Pamela,
MAST Team
Abstract:
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a signifi…
▽ More
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a significant drop in the edge pressure gradient, which would be expected to stabilise the peeling-ballooning modes thought to be responsible for type-I ELMs. Various mechanisms which could cause a destabilisation of the peeling-ballooning modes are presented, including pedestal widening, plasma rotation braking, three dimensional corrugation of the plasma boundary and the existence of radially extended lobe structures near to the X-point. This leads to a model aimed at resolving the apparent dichotomy of ELM control, that is to say ELM suppression occurring due to the pedestal pressure reduction below the peeling-ballooning stability boundary, whilst the reduction in pressure can also lead to ELM mitigation, which is ostensibly a destabilisation of peeling-ballooning modes. In the case of ELM mitigation, the pedestal broadening, 3d corrugation or lobes near the X-point degrade ballooning stability so much that the pedestal recovers rapidly to cross the new stability boundary at lower pressure more frequently, whilst in the case of suppression, the plasma parameters are such that the particle transport reduces the edge pressure below the stability boundary which is only mildly affected by negligible rotation braking, small edge corrugation or short, broad lobe structures.
△ Less
Submitted 16 May, 2013;
originally announced May 2013.
-
Effect of resonant magnetic perturbations with toroidal mode numbers of 4 and 6 on ELMs in single null H-mode plasmas in MAST
Authors:
A. Kirk,
I. T. Chapman,
J. Harrison,
Yueqiang Liu,
E. Nardon,
S. Saarelma,
R. Scannell,
A. J. Thornton,
the MAST team
Abstract:
The application of resonant magnetic perturbations (RMPs) with a toroidal mode number of n=4 or n=6 to lower single null plasmas in the MAST tokamak produces up to a factor of 5 increase in Edge Localized Mode (ELM) frequency and reduction in plasma energy loss associated with type-I ELMs. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately line…
▽ More
The application of resonant magnetic perturbations (RMPs) with a toroidal mode number of n=4 or n=6 to lower single null plasmas in the MAST tokamak produces up to a factor of 5 increase in Edge Localized Mode (ELM) frequency and reduction in plasma energy loss associated with type-I ELMs. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately linearly with current in the coils. Despite a large scan of parameters, complete ELM suppression has not been achieved. The results have been compared to modelling performed using either the vacuum approximation or including the plasma response. During the ELM mitigated stage clear lobe structures are observed in visible-light imaging of the X-point region. The size of these lobes is correlated with the increase in ELM frequency observed. The characteristics of the mitigated ELMs are similar to those of the natural ELMs suggesting that they are type I ELMs which are triggered at a lower pressure gradient. The application of the RMPs in the n=4 and n=6 configurations before the L-H transition has little effect on the power required to achieve H-mode while still allowing the first ELM to be mitigated.
△ Less
Submitted 14 May, 2013;
originally announced May 2013.
-
Pellet fuelling of plasmas with ELM mitigation by resonant magnetic perturbations in MAST
Authors:
M Valovic,
G Cunningham,
L Garzotti,
C Gurl,
A Kirk,
G Naylor,
A Patel,
R Scannell,
A J Thornton
Abstract:
Shallow fuelling pellets are injected from the high field side into plasmas in which ELMs have been mitigated using external magnetic perturbation coils. The data are compared with ideal assumptions in the ITER fuelling model, namely that mitigated ELMs are not affected by fuelling pellets. Firstly it is shown that during the pellet evaporation an ELM is triggered, during which the amount particle…
▽ More
Shallow fuelling pellets are injected from the high field side into plasmas in which ELMs have been mitigated using external magnetic perturbation coils. The data are compared with ideal assumptions in the ITER fuelling model, namely that mitigated ELMs are not affected by fuelling pellets. Firstly it is shown that during the pellet evaporation an ELM is triggered, during which the amount particle loss could be larger (factor ~1.5) than the particle loss during an ELM which was not induced by pellet. Secondly, a favourable example is shown in which post-pellet particle losses due to mitigated ELMs are similar to the non-pellet case, however unfavourable counter-examples also exist.
△ Less
Submitted 13 May, 2013;
originally announced May 2013.
-
Effect of resonant magnetic perturbations on ELMs in connected double null plasmas in MAST
Authors:
A. Kirk,
Yueqiang Liu,
I. T. Chapman,
J. Harrison,
E. Nardon,
R. Scannell,
A. J. Thornton,
the MAST team
Abstract:
The application of resonant magnetic perturbations (RMPs) with a toroidal mode number of n=3 to connected double null plasmas in the MAST tokamak produces up to a factor of 9 increase in Edge Localized Mode (ELM) frequency and reduction in plasma energy loss associated with type-I ELMs. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately linearl…
▽ More
The application of resonant magnetic perturbations (RMPs) with a toroidal mode number of n=3 to connected double null plasmas in the MAST tokamak produces up to a factor of 9 increase in Edge Localized Mode (ELM) frequency and reduction in plasma energy loss associated with type-I ELMs. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately linearly with current in the coils. The effect of the RMPs is found to be scenario dependent. In one scenario the mitigation is only due to a large density pump out event and if the density is recovered by gas puffing a return to type I ELMs is observed. In another scenario sustained ELM mitigation can be achieved irrespective of the amount of fuelling. Despite a large scan of parameters complete ELM suppression has not been achieved. The results have been compared to modelling performed using either the vacuum approximation or including the plasma response. The requirement for a resonant condition, that is an optimum alignment of the perturbation with the plasma, has been confirmed by performing a scan in the pitch angle of the applied field.
△ Less
Submitted 1 March, 2013;
originally announced March 2013.
-
Mini-magnetospheres above the lunar surface and the formation of lunar swirls
Authors:
R. A. Bamford,
B. Kellett,
W. J. Bradford,
C. Norberg,
A. Thornton,
K. J. Gibson,
I. A. Crawford,
L. Silva,
L. Gargate,
R. Bingham
Abstract:
In this paper we present in-situ satellite data, theory and laboratory validation that show how small scale collisionless shocks and mini-magnetospheres can form on the electron inertial scale length. The resulting retardation and deflection of the solar wind ions could be responsible for the unusual "lunar swirl" patterns seen on the surface of the Moon.
In this paper we present in-situ satellite data, theory and laboratory validation that show how small scale collisionless shocks and mini-magnetospheres can form on the electron inertial scale length. The resulting retardation and deflection of the solar wind ions could be responsible for the unusual "lunar swirl" patterns seen on the surface of the Moon.
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
Strike point splitting induced by the application of magnetic perturbations on MAST
Authors:
P. Cahyna,
M. Peterka,
A. Kirk,
A. Thornton,
J. Harrison,
D. Muir,
R. Panek,
the MAST team
Abstract:
Divertor strike point splitting induced by resonant magnetic perturbations (RMPs) has been observed on MAST for a variety of RMP configurations in a plasma scenario with Ip=750kA where those configurations all have similar resonant components. Complementary measurements have been obtained with divertor Langmuir probes and an infrared camera. Clear splitting consistently appears in this scenario on…
▽ More
Divertor strike point splitting induced by resonant magnetic perturbations (RMPs) has been observed on MAST for a variety of RMP configurations in a plasma scenario with Ip=750kA where those configurations all have similar resonant components. Complementary measurements have been obtained with divertor Langmuir probes and an infrared camera. Clear splitting consistently appears in this scenario only in the even configuration of the perturbation coils, similarly to the density pump-out. These results present a challenge for models of plasma response to RMPs.
△ Less
Submitted 24 May, 2012;
originally announced May 2012.
-
Hybrid simulations of mini-magnetospheres in the laboratory
Authors:
L. Gargaté,
R. Bingham,
R. A. Fonseca,
R. Bamford,
A. Thornton,
K. Gibson,
J. Bradford,
L. O. Silva
Abstract:
Solar energetic ions are a known hazard to both spacecraft electronics and to manned space flights in interplanetary space missions that extend over a long period of time. A dipole-like magnetic field and a plasma source, forming a mini magnetosphere, are being tested in the laboratory as means of protection against such hazards. We investigate, via particle-in-cell hybrid simulations, using kin…
▽ More
Solar energetic ions are a known hazard to both spacecraft electronics and to manned space flights in interplanetary space missions that extend over a long period of time. A dipole-like magnetic field and a plasma source, forming a mini magnetosphere, are being tested in the laboratory as means of protection against such hazards. We investigate, via particle-in-cell hybrid simulations, using kinetic ions and fluid electrons, the characteristics of the mini magnetospheres. Our results, for parameters identical to the experimental conditions, reveal the formation of a mini-magnetosphere, whose features are scanned with respect to the plasma density, the plasma flow velocity, and the intensity of the dipole field. Comparisons with a simplified theoretical model reveal a good qualitative agreement and excellent quantitative agreement for higher plasma dynamic pressures and lower B-fields.
△ Less
Submitted 1 February, 2008;
originally announced February 2008.