-
A Nonlinear Damped Metamaterial: Wideband Attenuation with Nonlinear Bandgap and Modal Dissipation
Authors:
Bao Zhao,
Henrik R. Thomsen,
Xingbo Pu,
Shitong Fang,
Zhihui Lai,
Bart Van Damme,
Andrea Bergamini,
Eleni Chatzi,
Andrea Colombi
Abstract:
In this paper, we incorporate the effect of nonlinear dam** with the concept of locally resonant metamaterials to enable vibration attenuation beyond the conventional bandgap range. The proposed design combines a linear host cantilever beam and periodically distributed inertia amplifiers as nonlinear local resonators. The geometric nonlinearity induced by the inertia amplifiers causes an amplitu…
▽ More
In this paper, we incorporate the effect of nonlinear dam** with the concept of locally resonant metamaterials to enable vibration attenuation beyond the conventional bandgap range. The proposed design combines a linear host cantilever beam and periodically distributed inertia amplifiers as nonlinear local resonators. The geometric nonlinearity induced by the inertia amplifiers causes an amplitude-dependent nonlinear dam** effect. Through the implementation of both modal superposition and numerical harmonic methods the finite nonlinear metamaterial is accurately modelled. The resulting nonlinear frequency response reveals the bandgap is both amplitude-dependent and broadened. Furthermore, the modal frequencies are also attenuated due to the nonlinear dam** effect. The theoretical results are validated experimentally. By embedding the nonlinear dam** effect into locally resonant metamaterials, wideband attenuation of the proposed metamaterial is achieved, which opens new possibilities for versatile metamaterials beyond the limit of their linear counterparts.
△ Less
Submitted 2 January, 2024; v1 submitted 26 July, 2023;
originally announced July 2023.
-
Boundless metamaterial experimentation: physical realization of a virtual periodic boundary condition
Authors:
Henrik R. Thomsen,
Bao Zhao,
Andrea Colombi
Abstract:
We experimentally implement a virtual geometric periodicity in an elastic metamaterial. First, unwanted boundary reflections at the domain ends are cancelled through the iterative injection of the polarity reversed, reflected wavefield. The resulting boundless experimental state allows for a much better analysis of the metamaterials influence on the propagating wavefield. Subsequently, the propaga…
▽ More
We experimentally implement a virtual geometric periodicity in an elastic metamaterial. First, unwanted boundary reflections at the domain ends are cancelled through the iterative injection of the polarity reversed, reflected wavefield. The resulting boundless experimental state allows for a much better analysis of the metamaterials influence on the propagating wavefield. Subsequently, the propagating wavefield exiting on one end of the structure is reintroduced at the opposite end, creating a virtual geometric periodicity. We find that the experimentally observed band gap converges to the analytical solution through the introduction of the virtual periodicity. The established workflow introduces a novel approach to the experimental investigation and validation of metamaterial prototypes in the presence of strongly dispersive wave propagation and internal scattering. The fully data driven, ad-hoc treatment of boundary conditions in metamaterial experimentation with arbitrary mechanical properties enables reflection suppression, virtual periodicity, and the introduction of more general fictitious boundaries.
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
A Graded Metamaterial for Broadband and High-capability Piezoelectric Energy Harvesting
Authors:
Bao Zhao,
Henrik R. Thomsen,
Jacopo M. De Ponti,
Emanuele Riva,
Bart Van Damme,
Andrea Bergamini,
Eleni Chatzi,
Andrea Colombi
Abstract:
This work studies a broadband graded metamaterial, which integrates the piezoelectric energy harvesting function targeting low-frequency structural vibrations, lying below 100 Hz. The device combines a graded metamaterial with beam-like resonators, piezoelectric patches and a self-powered piezoelectric interface circuit for energy harvesting. Based on the mechanical and electrical lumped parameter…
▽ More
This work studies a broadband graded metamaterial, which integrates the piezoelectric energy harvesting function targeting low-frequency structural vibrations, lying below 100 Hz. The device combines a graded metamaterial with beam-like resonators, piezoelectric patches and a self-powered piezoelectric interface circuit for energy harvesting. Based on the mechanical and electrical lumped parameters, an integrated model is proposed to investigate the power performance of the proposed design. Thorough numerical simulations were conducted to analyse the spatial frequency separation capacity and the slow-wave phenomenon of the graded metamaterial for broadband and high-capability piezoelectric energy harvesting. Experiments with realistic vibration sources show that the harvested power of the proposed design yields a five-fold increase with respect to conventional harvesting solutions based on single cantilever harvesters. Our results reveal the significant potential on exploitation of graded metamaterials for energy-efficient vibration-powered devices.
△ Less
Submitted 17 September, 2022; v1 submitted 13 May, 2022;
originally announced May 2022.
-
Stress-optimized inertial amplified metastructure with opposite chirality for vibration attenuation
Authors:
Rachele Zaccherini,
Andrea Colombi,
Antonio Palermo,
Henrik R. Thomsen,
Eleni N. Chatzi
Abstract:
In this work, we investigate the dynamics and attenuation properties of a one-dimensional inertial amplified lattice with opposite chirality. The unit cell of the structure consists of a hollow-square plate connected to a ring through arch-like ligaments. The peculiar geometry and orientation of the links allow for coupling the axial and the torsional motion of the lattice, thus amplifying the ine…
▽ More
In this work, we investigate the dynamics and attenuation properties of a one-dimensional inertial amplified lattice with opposite chirality. The unit cell of the structure consists of a hollow-square plate connected to a ring through arch-like ligaments. The peculiar geometry and orientation of the links allow for coupling the axial and the torsional motion of the lattice, thus amplifying the inertia of the system. We develop both simplified analytical and numerical models of the building block to derive the complex dispersion relation of the infinite lattice. The structure supports a frequency-tailorable attenuation zone, whose lower bound is controlled by the second coupled axial-torsional mode. Laboratory measurements of the transmission spectrum on a 3D printed sample match very well with the analytical and numerical predictions, confirming the wide-band filtering properties of this lattice. We complete our investigation by develo** and solving a constrained optimization model to obtain the optimized geometric parameters of the unit cell that minimize the bandgap opening frequency and, at the same time, fulfill structural requirements. In particular, the internal stresses induced by the self-weight of the structure are kept to a low by virtue of the employed design, with the aim to prevent plastic deformations and failure. The inertial amplification mechanism, proposed and investigated in this work, offers an efficient variant for the efficient design of materials and structures for vibration mitigation and shock protection.
△ Less
Submitted 13 November, 2021;
originally announced November 2021.
-
Binary classification of spoken words with passive phononic metamaterials
Authors:
Tena Dubček,
Daniel Moreno-Garcia,
Thomas Haag,
Parisa Omidvar,
Henrik R. Thomsen,
Theodor S. Becker,
Lars Gebraad,
Christoph Bärlocher,
Fredrik Andersson,
Sebastian D. Huber,
Dirk-Jan van Manen,
Luis Guillermo Villanueva,
Johan O. A. Robertsson,
Marc Serra-Garcia
Abstract:
Mitigating the energy requirements of artificial intelligence requires novel physical substrates for computation. Phononic metamaterials have a vanishingly low power dissipation and hence are a prime candidate for green, always-on computers. However, their use in machine learning applications has not been explored due to the complexity of their design process: Current phononic metamaterials are re…
▽ More
Mitigating the energy requirements of artificial intelligence requires novel physical substrates for computation. Phononic metamaterials have a vanishingly low power dissipation and hence are a prime candidate for green, always-on computers. However, their use in machine learning applications has not been explored due to the complexity of their design process: Current phononic metamaterials are restricted to simple geometries (e.g. periodic, tapered), and hence do not possess sufficient expressivity to encode machine learning tasks. We design and fabricate a non-periodic phononic metamaterial, directly from data samples, that can distinguish between pairs of spoken words in the presence of a simple readout nonlinearity; hence demonstrating that phononic metamaterials are a viable avenue towards zero-power smart devices.
△ Less
Submitted 7 July, 2023; v1 submitted 14 November, 2021;
originally announced November 2021.
-
Locally resonant metasurfaces for shear waves in granular media
Authors:
Rachele Zaccherini,
Andrea Colombi,
Antonio Palermo,
Vasilis K. Dertimanis,
Alessandro Marzani,
Henrik R. Thomsen,
Bozidar Stojadinovic,
Eleni N. Chatzi
Abstract:
In this article the physics of horizontally polarized shear waves travelling across a locally resonant metasurface in an unconsolidated granular medium is experimentally and numerically explored. The metasurface is comprised of an arrangement of sub-wavelength horizontal mechanical resonators embedded in silica microbeads. The metasurface supports a frequency-tailorable attenuation zone induced by…
▽ More
In this article the physics of horizontally polarized shear waves travelling across a locally resonant metasurface in an unconsolidated granular medium is experimentally and numerically explored. The metasurface is comprised of an arrangement of sub-wavelength horizontal mechanical resonators embedded in silica microbeads. The metasurface supports a frequency-tailorable attenuation zone induced by the translational mode of the resonators. The experimental and numerical findings reveal that the metasurface not only backscatters part of the energy, but also redirects the wavefront underneath the resonators leading to a considerable amplitude attenuation at the surface level, when all the resonators have similar resonant frequency. A more complex picture emerges when using resonators arranged in a so-called graded design, e.g., with a resonant frequency increasing/decreasing throughout the metasurface. Unlike Love waves propagating in a bi-layer medium, shear waves localized at the surface of our metasurface are not converted into bulk waves. Although a detachment from the surface occurs, the depth-dependent velocity profile of the granular medium prevents the mode-conversion, steering again the horizontally polarized shear waves towards the surface. The outcomes of our experimental and numerical studies allow for understanding the dynamics of wave propagation in resonant metamaterials embedded in vertically inhomogeneous soils and, therefore, are essential for improving the design of engineered devices for ground vibration and seismic wave containment.
△ Less
Submitted 2 December, 2019;
originally announced December 2019.
