-
Probing Electrical Properties of A Silicon Nanocrystal Thin Film Using X-ray Photoelectron Spectroscopy
Authors:
Amrit Laudari,
Sameera Pathiranage,
Salim A. Thomas,
Reed J. Petersen,
Kenneth J. Anderson,
Todd A. Pringle,
Erik K. Hobbie,
Nuri Oncel
Abstract:
We performed X-ray photoelectron spectroscopy (XPS) measurements on a thin film of Si nanocrystals (SiNCs) while applying DC or AC external biases to extract the resistance and the capacitance of the thin film. The measurement consists of the application of 10 V DC or square wave pulses of 10 V amplitude to the sample at various frequencies ranging from 0.01 Hz to 1 MHz while recording X-ray photo…
▽ More
We performed X-ray photoelectron spectroscopy (XPS) measurements on a thin film of Si nanocrystals (SiNCs) while applying DC or AC external biases to extract the resistance and the capacitance of the thin film. The measurement consists of the application of 10 V DC or square wave pulses of 10 V amplitude to the sample at various frequencies ranging from 0.01 Hz to 1 MHz while recording X-ray photoemission data. To analyze the data, we propose three different models with varying degrees of accuracy. The calculated capacitance of SiNCs agrees with the experimental value in the literature.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Collective photoprotection through light-induced phase separation in a phototactic micro-alga
Authors:
Eisenmann Isabelle,
L'Homme Alfredo,
Lahlou Aliénor,
Bujaldon Sandrine,
Le Saux Thomas,
Bailleul Benjamin,
Desprat Nicolas,
Jeanneret Raphaël
Abstract:
Light can be harmful for photosynthetic organisms when it exceeds the capacity of photon conversion by the photosynthetic machinery. When light intensity is too high, the motile micro-algae Chlamydomonas reinhardtii reorients itself to swim away from the source. We recently discovered that a suspension of photophobic algae can be unstable, occasioning a complete phase separation of the system with…
▽ More
Light can be harmful for photosynthetic organisms when it exceeds the capacity of photon conversion by the photosynthetic machinery. When light intensity is too high, the motile micro-algae Chlamydomonas reinhardtii reorients itself to swim away from the source. We recently discovered that a suspension of photophobic algae can be unstable, occasioning a complete phase separation of the system with the emergence of an active liquid phase. Indeed here small spatial fluctuations in cell density influence the phototactic behavior of surrounding cells which tend to join and therefore amplify the fluctuations. In a cylindrical geometry, this strong coupling between cell density and light fields through both negative phototaxis and light absorption by the individual cells led to the emergence of dynamic branching patterns whose features depend on the global cell density, light intensity and medium viscosity. We developed a simple model based on a drift-diffusion framework that finely reproduces the experimental data on the destabilization. We finally showed that this active phase separation efficiently protects the individual cells against the negative effects of light on the integrity of the photosynthetic machinery (photoinhibition of Photosystem II), demonstrating that on short timescales phototaxis efficiently contributes to photoprotection through collective behaviors at the population level.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Two-Stage Cryogenic HEMT Based Amplifier For Low Temperature Detectors
Authors:
J. Anczarski,
M. Dubovskov,
C. W. Fink,
S. Kevane,
N. A. Kurinsky,
A. Mazumdar,
S. J. Meijer,
A. Phipps,
F. Ronning,
I. Rydstrom,
A. Simchony,
Z. Smith,
S. M. Thomas,
S. L. Watkins,
B. A. Young
Abstract:
To search for dark matter candidates with masses below $\mathcal{O}$(MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is develo** novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1-100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogeni…
▽ More
To search for dark matter candidates with masses below $\mathcal{O}$(MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is develo** novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1-100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogenic HEMT-based amplifier with an estimated charge resolution approaching the single-electron level. A low-capacitance ($\sim$1.6 pF) HEMT is used as a buffer stage at $T=10\,\mathrm{mK}$ to mitigate effects of stray capacitance at the input. The buffered signal is then amplified by a higher-capacitance ($\sim$200 pF) HEMT amplifier stage at $T=4\,\mathrm{K}$. Importantly, the design of this amplifier makes it usable with any insulating material - allowing for rapid prototy** of a variety of novel detector materials. We present the two-stage cryogenic amplifier design, preliminary voltage noise performance, and estimated charge resolution of 7.2 electrons.
△ Less
Submitted 26 January, 2024; v1 submitted 3 November, 2023;
originally announced November 2023.
-
Rapid Scan White Light Two-dimensional Electronic Spectroscopy with 100 kHz Shot-to-Shot Detection
Authors:
Asha S. Thomas,
Vivek N. Bhat,
Vivek Tiwari
Abstract:
We demonstrate an approach to two-dimensional electronic spectroscopy (2DES) that combines the benefits of shot-to-shot detection at high-repetition rates with the simplicity of a broadband white light continuum input and conventional optical elements to generate phase-locked pump pulse pairs. We demonstrate this through mutual synchronization between the laser repetition rate, acousto-optical def…
▽ More
We demonstrate an approach to two-dimensional electronic spectroscopy (2DES) that combines the benefits of shot-to-shot detection at high-repetition rates with the simplicity of a broadband white light continuum input and conventional optical elements to generate phase-locked pump pulse pairs. We demonstrate this through mutual synchronization between the laser repetition rate, acousto-optical deflector (AOD), pump delay stage and the CCD line camera, which allows rapid scanning of pump optical delay synchronously with the laser repetition rate while the delay stage is moved at a constant velocity. The resulting shot-to-shot detection scheme is repetition rate scalable and only limited by the CCD line rate and the maximum stage velocity. Using this approach, we demonstrate measurement of an averaged 2DES absorptive spectrum in as much as 1.2 seconds of continuous sample exposure per 2D spectrum. We achieve a signal-to-noise ratio (SNR) of 6.8 for optical densities down to 0.05 with 11.6 seconds of averaging at 100 kHz laser repetition rate. Combining rapid scanning of mechanical delay lines with shot-to-shot detection as demonstrated here provides a viable alternative to acousto-optic pulse sha** (AOPS) approaches that is repetition-rate scalable, has comparable throughput and sensitivity, and minimizes sample exposure per 2D spectrum with promising micro-spectroscopy applications.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
Direct-write projection lithography of quantum dot micropillar single photon sources
Authors:
Petros Androvitsaneas,
Rachel N. Clark,
Matthew Jordan,
Tomas Peach,
Stuart Thomas,
Saleem Shabbir,
Angela D. Sobiesierski,
Aristotelis Trapalis,
Ian A. Farrer,
Wolfgang W. Langbein,
Anthony J. Bennett
Abstract:
We have developed a process to mass-produce quantum dot micropillar cavities using direct-write lithography. This technique allows us to achieve high volume patterning of high aspect ratio pillars with vertical, smooth sidewalls maintaining a high quality factor for diameters below 2.0 $μ$m. Encapsulating the cavities in a thin layer of oxide (Ta$_2$O$_5$) prevents oxidation in the atmosphere, pre…
▽ More
We have developed a process to mass-produce quantum dot micropillar cavities using direct-write lithography. This technique allows us to achieve high volume patterning of high aspect ratio pillars with vertical, smooth sidewalls maintaining a high quality factor for diameters below 2.0 $μ$m. Encapsulating the cavities in a thin layer of oxide (Ta$_2$O$_5$) prevents oxidation in the atmosphere, preserving the optical properties of the cavity over months of ambient exposure. We confirm that single dots in the cavities can be deterministically excited to create high purity indistinguishable single photons with interference visibility $(96.2\pm0.7)\%$.
△ Less
Submitted 31 March, 2023;
originally announced April 2023.
-
1S-3S cw spectroscopy of hydrogen/deuterium atom
Authors:
Pauline Yzombard,
Simon Thomas,
Lucile Julien,
Francois Biraben,
Francois Nez
Abstract:
We study the 1S-3S two-photon transition of hydrogen in a thermal atomic beam, using a homemade cw laser source at 205 nm. The experimental method is described, leading in 2017 to the measurement of the 1S-3S transition frequency in hydrogen atom with a relative uncertainty of $9 \times 10^{-13}$. This result contributes to the "proton puzzle" resolution but is in disagreement with the ones of som…
▽ More
We study the 1S-3S two-photon transition of hydrogen in a thermal atomic beam, using a homemade cw laser source at 205 nm. The experimental method is described, leading in 2017 to the measurement of the 1S-3S transition frequency in hydrogen atom with a relative uncertainty of $9 \times 10^{-13}$. This result contributes to the "proton puzzle" resolution but is in disagreement with the ones of some others experiments. We have recently improved our setup with the aim of carrying out the same measurement in deuterium. With the improved detection system, we have observed a broadened fluorescence signal, superimposed on the narrow signal studied so far, and due to the stray accumulation of atoms in the vacuum chamber. The possible resulting systematic effect is discussed.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Rapid Scan White Light Pump-Probe Spectroscopy with 100 kHz Shot-to-Shot Detection
Authors:
Vivek N. Bhat,
Asha S. Thomas,
Vivek Tiwari
Abstract:
We demonstrate a femtosecond pump-probe spectrometer which utilizes a white light supercontinuum as input, and relies on mutual synchronization of acousto-optical chopper, pump-probe delay stage and the CCD camera to record shot-to-shot pump-probe spectra while the pump-probe delay is scanned synchronously with the laser repetition rate. The unique combination of technologies implemented here allo…
▽ More
We demonstrate a femtosecond pump-probe spectrometer which utilizes a white light supercontinuum as input, and relies on mutual synchronization of acousto-optical chopper, pump-probe delay stage and the CCD camera to record shot-to-shot pump-probe spectra while the pump-probe delay is scanned synchronously with the laser repetition rate. The unique combination of technologies implemented here allows for electronically controllable and repetition-rate scalable detection throughput that is only limited by the camera frame rate. Despite RMS white-light probe fluctuations of ~5.5%, fully leveraging the temporal correlations in white light and fine sampling of pump-probe delay along with 30x reduction in equivalent data collection time compared to stepwise scanning leads to reduction of RMS noise without multichannel referencing down to ~0.33 mOD for a scattering nanotube sample. This demonstration opens door for impulsive pump-probe micro-spectroscopy of scattering samples with broadband spectral coverage and minimized sample exposure.
△ Less
Submitted 26 December, 2022;
originally announced December 2022.
-
A Single-Photon-compatible Telecom-C-Band Quantum Memory in a Hot Atomic Gas
Authors:
S. E. Thomas,
S. Sagona-Stophel,
Z. Schofield,
I. A. Walmsley,
P. M. Ledingham
Abstract:
The efficient storage and on-demand retrieval of quantum optical states that are compatible with the telecommunications C-band is a requirement for future terrestrial-based quantum optical networking. Spectrum in the C-band minimises optical fiber-propagation losses, and broad optical bandwidth facilitates high-speed networking protocols. Here we report on a telecommunication wavelength and bandwi…
▽ More
The efficient storage and on-demand retrieval of quantum optical states that are compatible with the telecommunications C-band is a requirement for future terrestrial-based quantum optical networking. Spectrum in the C-band minimises optical fiber-propagation losses, and broad optical bandwidth facilitates high-speed networking protocols. Here we report on a telecommunication wavelength and bandwidth compatible quantum memory. Using the Off-Resonant Cascaded Absorption protocol in hot $^{87}$Rb vapour, we demonstrate a total memory efficiency of $20.90(1)\,\%$ with a Doppler-limited storage time of $1.10(2)\,$ns. We characterise the memory performance with weak coherent states, demonstrating signal-to-noise ratios greater than unity for mean photon number inputs above $4.5(6)\times10^{-6}$ per pulse.
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
Enumerating Stable Nanopores in Graphene and their Geometrical Properties Using the Combinatorics of Hexagonal Lattices
Authors:
Sneha Thomas,
Kevin S. Silmore,
Ananth Govind Rajan
Abstract:
Nanopores in two-dimensional (2D) materials, including graphene, can be used for a variety of applications, such as gas separations, water desalination, and DNA sequencing. So far, however, all plausible isomeric shapes of graphene nanopores have not been enumerated. Instead, a probabilistic approach has been followed to predict nanopore shapes in 2D materials, due to the exponential increase in t…
▽ More
Nanopores in two-dimensional (2D) materials, including graphene, can be used for a variety of applications, such as gas separations, water desalination, and DNA sequencing. So far, however, all plausible isomeric shapes of graphene nanopores have not been enumerated. Instead, a probabilistic approach has been followed to predict nanopore shapes in 2D materials, due to the exponential increase in the number of nanopores as the size of the vacancy increases. For example, there are 12 possible isomers when N=6 atoms are removed, a number that theoretically increases to 11.7 million when N=20 atoms are removed from the graphene lattice. The development of a smaller, exhaustive dataset of stable nanopore shapes can help future experimental and theoretical studies focused on using nanoporous 2D materials in various applications. In this work, we use the theory of 2D triangular "lattice animals" to create a library of all stable graphene nanopore shapes based on a modification of a well-known algorithm in the mathematical combinatorics of polyforms known as Redelmeier's algorithm. We show that there exists a correspondence between graphene nanopores and triangular polyforms (called polyiamonds) as well as hexagonal polyforms (called polyhexes). We develop the concept of a polyiamond ID to identify unique nanopore isomers. We also use concepts from polyiamond and polyhex geometry to eliminate unstable nanopores containing dangling atoms, bonds, and moieties. The exclusion of such unstable nanopores leads to a remarkable reduction in the possible nanopores from 11.7 million for N=20 to only 0.184 million nanopores, thereby indicating that the number of stable nanopores is almost two orders of magnitude lower and is much more tractable. Not only that, by extracting the polyhex outline, our algorithm allows searching for nanopores with dimensions and shape factors in a specified range.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Mitigation of the Turbulence within an Arteriovenous Fistula with a Stent Implantation
Authors:
Sanjiv Gunasekera,
Tracie Barber,
Olivia Ng,
Shannon Thomas,
Ramon Varcoe,
Charitha de Silva
Abstract:
The transitional flow which initiates within the junction (anastomosis) of an arteriovenous fistula (AVF) is known to be a contributing factor in the onset of vascular disease. A novel treatment method involving the implantation of a flexible stent across the anastomosis has enabled the retention of a large proportion of functioning AVFs, despite the propensity for stent malapposition to occur at…
▽ More
The transitional flow which initiates within the junction (anastomosis) of an arteriovenous fistula (AVF) is known to be a contributing factor in the onset of vascular disease. A novel treatment method involving the implantation of a flexible stent across the anastomosis has enabled the retention of a large proportion of functioning AVFs, despite the propensity for stent malapposition to occur at the sharp inner curve of the anastomosis. Large Eddy Simulations (LES) of a patient-specific AVF with and without the presence of a stent captured oscillatory flow behaviour emanating from the interface of the two inlet flows in the stent-absent case, however, these oscillatory features were subdued in the stented case. The stent-absent case generally had higher Turbulent Kinetic Energy (TKE) in the anastomosis which led to larger cycle-to-cycle variations in wall shear stress (WSS). The significantly lower TKE generated at the heel of the stented AVF was contained within the malapposed stent, thereby resulting in lower WSS fluctuations. However, a slight increase in turbulence downstream of the malapposed stent edge was noted. This detailed study reveals a significant decrease in turbulence within the AVF in the presence of the stent, thereby, providing a level of understanding underpinning the success of the treatment strategy from a fluid dynamic perspective.
△ Less
Submitted 11 December, 2022; v1 submitted 31 July, 2022;
originally announced August 2022.
-
Epidemic Control Modeling using Parsimonious Models and Markov Decision Processes
Authors:
Edilson F. Arruda,
Tarun Sharma,
Rodrigo e A. Alexandre,
Sinnu Susan Thomas
Abstract:
Many countries have experienced at least two waves of the COVID-19 pandemic. The second wave is far more dangerous as distinct strains appear more harmful to human health, but it stems from the complacency about the first wave. This paper introduces a parsimonious yet representative stochastic epidemic model that simulates the uncertain spread of the disease regardless of the latency and recovery…
▽ More
Many countries have experienced at least two waves of the COVID-19 pandemic. The second wave is far more dangerous as distinct strains appear more harmful to human health, but it stems from the complacency about the first wave. This paper introduces a parsimonious yet representative stochastic epidemic model that simulates the uncertain spread of the disease regardless of the latency and recovery time distributions. We also propose a Markov decision process to seek an optimal trade-off between the usage of the healthcare system and the economic costs of an epidemic. We apply the model to COVID-19 data from New Delhi, India and simulate the epidemic spread with different policy review times. The results show that the optimal policy acts swiftly to curb the epidemic in the first wave, thus avoiding the collapse of the healthcare system and the future costs of posterior outbreaks. An analysis of the recent collapse of the healthcare system of India during the second COVID-19 wave suggests that many lives could have been preserved if swift mitigation was promoted after the first wave.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
First High-speed Video Camera Observations of a Lightning Flash Associated with a Downward Terrestrial Gamma-ray Flash
Authors:
R. U. Abbasi,
M. M. F. Saba,
J. W. Belz,
P. R. Krehbiel,
W. Rison,
N. Kieu,
D. R. da Silva,
Dan Rodeheffer,
M. A. Stanley,
J. Remington,
J. Mazich,
R. LeVon,
K. Smout,
A. Petrizze,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
R. Arimura,
E. Barcikowski,
D. R. Bergman,
S. A. Blake,
I. Buckland,
B. G. Cheon,
M. Chikawa,
T. Fujii
, et al. (127 additional authors not shown)
Abstract:
In this paper, we present the first high-speed video observation of a cloud-to-ground lightning flash and its associated downward-directed Terrestrial Gamma-ray Flash (TGF). The optical emission of the event was observed by a high-speed video camera running at 40,000 frames per second in conjunction with the Telescope Array Surface Detector, Lightning Map** Array, interferometer, electric-field…
▽ More
In this paper, we present the first high-speed video observation of a cloud-to-ground lightning flash and its associated downward-directed Terrestrial Gamma-ray Flash (TGF). The optical emission of the event was observed by a high-speed video camera running at 40,000 frames per second in conjunction with the Telescope Array Surface Detector, Lightning Map** Array, interferometer, electric-field fast antenna, and the National Lightning Detection Network. The cloud-to-ground flash associated with the observed TGF was formed by a fast downward leader followed by a very intense return stroke peak current of -154 kA. The TGF occurred while the downward leader was below cloud base, and even when it was halfway in its propagation to ground. The suite of gamma-ray and lightning instruments, timing resolution, and source proximity offer us detailed information and therefore a unique look at the TGF phenomena.
△ Less
Submitted 9 August, 2023; v1 submitted 10 May, 2022;
originally announced May 2022.
-
Quantifying n-photon indistinguishability with a cyclic integrated interferometer
Authors:
Mathias Pont,
Riccardo Albiero,
Sarah E. Thomas,
Nicolò Spagnolo,
Francesco Ceccarelli,
Giacomo Corrielli,
Alexandre Brieussel,
Niccolo Somaschi,
Hêlio Huet,
Abdelmounaim Harouri,
Aristide Lemaître,
Isabelle Sagnes,
Nadia Belabas,
Fabio Sciarrino,
Roberto Osellame,
Pascale Senellart,
Andrea Crespi
Abstract:
We report on a universal method to measure the genuine indistinguishability of n-photons - a crucial parameter that determines the accuracy of optical quantum computing. Our approach relies on a low-depth cyclic multiport interferometer with N = 2n modes, leading to a quantum interference fringe whose visibility is a direct measurement of the genuine n-photon indistinguishability. We experimentall…
▽ More
We report on a universal method to measure the genuine indistinguishability of n-photons - a crucial parameter that determines the accuracy of optical quantum computing. Our approach relies on a low-depth cyclic multiport interferometer with N = 2n modes, leading to a quantum interference fringe whose visibility is a direct measurement of the genuine n-photon indistinguishability. We experimentally demonstrate this technique for a 8-mode integrated interferometer fabricated using femtosecond laser micromachining and four photons from a quantum dot single-photon source. We measure a four-photon indistinguishability up to 0.81$\pm$0.03. This value decreases as we intentionally alter the photon pairwise indistinguishability. The low-depth and low-loss multiport interferometer design provides an efficient and scalable path to evaluate the genuine indistinguishability of resource states of increasing photon number.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Observation of Variations in Cosmic Ray Single Count Rates During Thunderstorms and Implications for Large-Scale Electric Field Changes
Authors:
R. U. Abbasi,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
R. Arimura,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
I. Buckland,
R. Cady,
B. G. Cheon,
J. Chiba,
M. Chikawa,
T. Fujii,
K. Fujisue,
K. Fujita,
R. Fujiwara,
M. Fukushima,
R. Fukushima,
G. Furlich,
N. Globus,
R. Gonzalez,
W. Hanlon,
M. Hayashi
, et al. (140 additional authors not shown)
Abstract:
We present the first observation by the Telescope Array Surface Detector (TASD) of the effect of thunderstorms on the development of cosmic ray single count rate intensity over a 700 km$^{2}$ area. Observations of variations in the secondary low-energy cosmic ray counting rate, using the TASD, allow us to study the electric field inside thunderstorms, on a large scale, as it progresses on top of t…
▽ More
We present the first observation by the Telescope Array Surface Detector (TASD) of the effect of thunderstorms on the development of cosmic ray single count rate intensity over a 700 km$^{2}$ area. Observations of variations in the secondary low-energy cosmic ray counting rate, using the TASD, allow us to study the electric field inside thunderstorms, on a large scale, as it progresses on top of the 700 km$^{2}$ detector, without dealing with the limitation of narrow exposure in time and space using balloons and aircraft detectors. In this work, variations in the cosmic ray intensity (single count rate) using the TASD, were studied and found to be on average at the $\sim(0.5-1)\%$ and up to 2\% level. These observations were found to be both in excess and in deficit. They were also found to be correlated with lightning in addition to thunderstorms. These variations lasted for tens of minutes; their footprint on the ground ranged from 6 to 24 km in diameter and moved in the same direction as the thunderstorm. With the use of simple electric field models inside the cloud and between cloud to ground, the observed variations in the cosmic ray single count rate were recreated using CORSIKA simulations. Depending on the electric field model used and the direction of the electric field in that model, the electric field magnitude that reproduces the observed low-energy cosmic ray single count rate variations was found to be approximately between 0.2-0.4 GV. This in turn allows us to get a reasonable insight on the electric field and its effect on cosmic ray air showers inside thunderstorms.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
Automatic Plane Adjustment of Orthopedic Intra-operative Flat Panel Detector CT-Volumes
Authors:
Celia Martin Vicario,
Florian Kordon,
Felix Denzinger,
Jan Siad El Barbari,
Maxim Privalov,
Jochen Franke,
Sarina Thomas,
Lisa Kausch,
Andreas Maier,
Holger Kunze
Abstract:
Purpose
3D acquisitions are often acquired to assess the result in orthopedic trauma surgery. With a mobile C-Arm system, these acquisitions can be performed intra-operatively. That reduces the number of required revision surgeries. However, due to the operation room setup, the acquisitions typically cannot be performed such that the acquired volumes are aligned to the anatomical regions. Thus,…
▽ More
Purpose
3D acquisitions are often acquired to assess the result in orthopedic trauma surgery. With a mobile C-Arm system, these acquisitions can be performed intra-operatively. That reduces the number of required revision surgeries. However, due to the operation room setup, the acquisitions typically cannot be performed such that the acquired volumes are aligned to the anatomical regions. Thus, the multiplanar reconstructed (MPR) planes need to be adjusted manually during the review of the volume. In this paper, we present a detailed study of multi-task learning (MTL) regression networks to estimate the parameters of the MPR planes.
Approach
First, various mathematical descriptions for rotation, including Euler angle, quaternion, and matrix representation, are revised. Then, three different MTL network architectures based on the PoseNet are compared with a single task learning network.
Results
Using a matrix description rather than the Euler angle description, the accuracy of the regressed normals improves from $7.7^{\circ}$ to $7.3^{\circ}$ in the mean value for single anatomies. The multi-head approach improves the regression of the plane position from $7.4mm$ to $6.1mm$, while the orientation does not benefit from this approach.
Conclusions
The results show that a multi-head approach can lead to slightly better results than the individual tasks networks. The most important benefit of the MTL approach is that it is a single network for standard plane regression for all body regions with a reduced number of stored parameters.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Electrodeposited WS$_2$ Monolayers on Fabricated Graphene Electrodes
Authors:
Yasir J Noori,
Shibin Thomas,
Sami Ramadan,
Victoria K. Greenacre,
Nema M. Abdelazim,
Yisong Han,
Jiapei Zhang,
Richard Beanland,
Andrew L. Hector,
Norbert Klein,
Gillian Reid,
Philip Bartlett,
Cornelis H. de Groot
Abstract:
The development of scalable techniques to make 2D material heterostructures is a major obstacle that needs to be overcome before these materials can be implemented in device technologies industrially. Electrodeposition is an industrially compatible deposition technique that offers unique advantages in scaling 2D heterostructures. In this work, we demonstrate the electrodeposition of atomic layers…
▽ More
The development of scalable techniques to make 2D material heterostructures is a major obstacle that needs to be overcome before these materials can be implemented in device technologies industrially. Electrodeposition is an industrially compatible deposition technique that offers unique advantages in scaling 2D heterostructures. In this work, we demonstrate the electrodeposition of atomic layers of WS$_2$ over graphene electrodes using a single source precursor. Using conventional microfabrication techniques, graphene was patterned to create micro-electrodes where WS$_2$ was site-selectively deposited to form 2D heterostructures. We used various characterisation techniques, including atomic force microscopy, transmission electron microscopy, Raman spectroscopy and x-ray photoelectron spectroscopy to show that our electrodeposited WS$_2$ layers are highly uniform and can be grown over graphene at a controllable deposition rate. This technique to selectively deposit TMDCs over microfabricated graphene electrodes paves the way towards wafer-scale production of 2D material heterostructures for nanodevice applications.
△ Less
Submitted 31 August, 2021;
originally announced September 2021.
-
Complex Ground-State and Excitation Energies in Coupled-Cluster Theory
Authors:
Simon Thomas,
Florian Hampe,
Stella Stopkowicz,
Jürgen Gauss
Abstract:
Since in coupled-cluster (CC) theory ground-state and excitation energies are eigenvalues of a non-Hermitian matrix, these energies can in principle take on complex values. In this paper we discuss the appearance of complex energy values in CC calculations from a mathematical perspective. We analyze the behaviour of the eigenvalues of Hermitian matrices that are perturbed (in a non-Hermitian manne…
▽ More
Since in coupled-cluster (CC) theory ground-state and excitation energies are eigenvalues of a non-Hermitian matrix, these energies can in principle take on complex values. In this paper we discuss the appearance of complex energy values in CC calculations from a mathematical perspective. We analyze the behaviour of the eigenvalues of Hermitian matrices that are perturbed (in a non-Hermitian manner) by a real parameter. Based on these results we show that for CC calculations with real-valued Hamiltonian matrices the ground-state energy generally takes a real value. Furthermore, we show that in the case of real-valued Hamiltonian matrices complex excitation energies only occur in the context of conical intersections. In such a case, unphysical consequences are encountered such as a wrong dimension of the intersection seam, large numerical deviations from full configuration-interaction (FCI) results, and the square-root-like behaviour of the potential surfaces near the conical intersection. In the case of CC calculations with complex-valued Hamiltonian matrix elements, it turns out that complex energy values are to be expected for ground and excited states when no symmetry is present. We confirm the occurrence of complex energies by sample calculations using a six-state model and by CC calculations for the H2O molecule in a strong magnetic field. We furthermore show that symmetry can prevent the occurrence of complex energy values. Lastly, we demonstrate that in most cases the real part of the complex energy values provides a very good approximation to the FCI energy.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Lateral electrodeposition of MoS2 semiconductor over an insulator
Authors:
Nema Abdelazim,
Yasir J Noori,
Shibin Thomas,
Victoria K Greenacre,
Yisong Han,
Danielle E. Smith,
Giacomo Piana,
Nikolay Zhelev,
Andrew L. Hector,
Richard Beanland,
Gillian Reid,
Philip N Bartlett,
Kees de Groot
Abstract:
Develo** novel techniques for depositing transition metal dichalcogenides is crucial for the industrial adoption of 2D materials in optoelectronics. In this work, the lateral growth of molybdenum disulfide (MoS2) over an insulating surface is demonstrated using electrochemical deposition. By fabricating a new type of microelectrodes, MoS2 2D films grown from TiN electrodes across opposite sides…
▽ More
Develo** novel techniques for depositing transition metal dichalcogenides is crucial for the industrial adoption of 2D materials in optoelectronics. In this work, the lateral growth of molybdenum disulfide (MoS2) over an insulating surface is demonstrated using electrochemical deposition. By fabricating a new type of microelectrodes, MoS2 2D films grown from TiN electrodes across opposite sides have been connected over an insulating substrate, hence, forming a lateral device structure through only one lithography and deposition step. Using a variety of characterization techniques, the growth rate of MoS2 has been shown to be highly anisotropic with lateral to vertical growth ratios exceeding 20-fold. Electronic and photo-response measurements on the device structures demonstrate that the electrodeposited MoS2 layers behave like semiconductors, confirming their potential for photodetection applications. This lateral growth technique paves the way towards room temperature, scalable and site-selective production of various transition metal dichalcogenides and their lateral heterostructures for 2D materials-based fabricated devices.
△ Less
Submitted 26 November, 2021; v1 submitted 1 April, 2021;
originally announced April 2021.
-
Surface detectors of the TAx4 experiment
Authors:
Telescope Array Collaboration,
R. U. Abbasi,
M. Abe,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
R. Cady,
B. G. Cheon,
J. Chiba,
M. Chikawa,
T. Fujii,
K. Fujisue,
K. Fujita,
R. Fujiwara,
M. Fukushima,
R. Fukushima,
G. Furlich,
W. Hanlon,
M. Hayashi,
N. Hayashida,
K. Hibino
, et al. (124 additional authors not shown)
Abstract:
Telescope Array (TA) is the largest ultrahigh energy cosmic-ray (UHECR) observatory in the Northern Hemisphere. It explores the origin of UHECRs by measuring their energy spectrum, arrival-direction distribution, and mass composition using a surface detector (SD) array covering approximately 700 km$^2$ and fluorescence detector (FD) stations. TA has found evidence for a cluster of cosmic rays with…
▽ More
Telescope Array (TA) is the largest ultrahigh energy cosmic-ray (UHECR) observatory in the Northern Hemisphere. It explores the origin of UHECRs by measuring their energy spectrum, arrival-direction distribution, and mass composition using a surface detector (SD) array covering approximately 700 km$^2$ and fluorescence detector (FD) stations. TA has found evidence for a cluster of cosmic rays with energies greater than 57 EeV. In order to confirm this evidence with more data, it is necessary to increase the data collection rate.We have begun building an expansion of TA that we call TAx4. In this paper, we explain the motivation, design, technical features, and expected performance of the TAx4 SD. We also present TAx4's current status and examples of the data that have already been collected.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Observations of the Origin of Downward Terrestrial Gamma-Ray Flashes
Authors:
J. W. Belz,
P. R. Krehbiel,
J. Remington,
M. A. Stanley,
R. U. Abbasi,
R. LeVon,
W. Rison,
D. Rodeheffer,
the Telescope Array Scientific Collaboration,
:,
T. Abu-Zayyad,
M. Allen,
E. Barcikowski,
D. R. Bergman,
S. A. Blake,
M. Byrne,
R. Cady,
B. G. Cheon,
M. Chikawa,
A. di Matteo,
T. Fujii,
K. Fujita,
R. Fujiwara,
M. Fukushima,
G. Furlich
, et al. (116 additional authors not shown)
Abstract:
In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (I…
▽ More
In this paper we report the first close, high-resolution observations of downward-directed terrestrial gamma-ray flashes (TGFs) detected by the large-area Telescope Array cosmic ray observatory, obtained in conjunction with broadband VHF interferometer and fast electric field change measurements of the parent discharge. The results show that the TGFs occur during strong initial breakdown pulses (IBPs) in the first few milliseconds of negative cloud-to-ground and low-altitude intracloud flashes, and that the IBPs are produced by a newly-identified streamer-based discharge process called fast negative breakdown. The observations indicate the relativistic runaway electron avalanches (RREAs) responsible for producing the TGFs are initiated by embedded spark-like transient conducting events (TCEs) within the fast streamer system, and potentially also by individual fast streamers themselves. The TCEs are inferred to be the cause of impulsive sub-pulses that are characteristic features of classic IBP sferics. Additional development of the avalanches would be facilitated by the enhanced electric field ahead of the advancing front of the fast negative breakdown. In addition to showing the nature of IBPs and their enigmatic sub-pulses, the observations also provide a possible explanation for the unsolved question of how the streamer to leader transition occurs during the initial negative breakdown, namely as a result of strong currents flowing in the final stage of successive IBPs, extending backward through both the IBP itself and the negative streamer breakdown preceding the IBP.
△ Less
Submitted 12 October, 2020; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Automatic Plane Adjustment of Orthopedic Intraoperative Flat Panel Detector CT-Volumes
Authors:
Celia Martín Vicario,
Florian Kordon,
Felix Denzinger,
Markus Weiten,
Sarina Thomas,
Lisa Kausch,
Jochen Franke,
Holger Keil,
Andreas Maier,
Holger Kunze
Abstract:
Flat panel computed tomography is used intraoperatively to assess the result of surgery. Due to workflow issues, the acquisition typically cannot be carried out in such a way that the axis aligned multiplanar reconstructions (MPR) of the volume match the anatomically aligned MPRs. This needs to be performed manually, adding additional effort during viewing the datasets. A PoseNet convolutional neu…
▽ More
Flat panel computed tomography is used intraoperatively to assess the result of surgery. Due to workflow issues, the acquisition typically cannot be carried out in such a way that the axis aligned multiplanar reconstructions (MPR) of the volume match the anatomically aligned MPRs. This needs to be performed manually, adding additional effort during viewing the datasets. A PoseNet convolutional neural network (CNN) is trained such that parameters of anatomically aligned MPR planes are regressed. Different mathematical approaches to describe plane rotation are compared, as well as a cost function is optimized to incorporate orientation constraints. The CNN is evaluated on two anatomical regions. For one of these regions, one plane is not orthogonal to the other two planes. The plane's normal can be estimated with a median accuracy of 5°, the in-plane rotation with an accuracy of 6°, and the position with an accuracy of 6 mm. Compared to state-of-the-art algorithms the labeling effort for this method is much lower as no segmentation is required. The computation time during inference is less than 0.05 s.
△ Less
Submitted 7 July, 2020;
originally announced July 2020.
-
Large-Area Electrodeposition of Few-Layer MoS2 on Graphene for 2D Material Heterostructures
Authors:
Yasir J. Noori,
Shibin Thomas,
Sami Ramadan,
Danielle E. Smith,
Victoria K. Greenacre,
Nema Abdelazim,
Yisong Han,
Richard Beanland,
Andrew L. Hector,
Norbert Klein,
Gill Reid,
Phillip N. Bartlett,
Cornelis H. de Groot
Abstract:
Heterostructures involving two-dimensional (2D) transition metal dichalcogenides and other materials such as graphene have a strong potential to be the fundamental building block of many electronic and opto-electronic applications. The integration and scalable fabrication of such heterostructures is of essence in unleashing the potential of these materials in new technologies. For the first time,…
▽ More
Heterostructures involving two-dimensional (2D) transition metal dichalcogenides and other materials such as graphene have a strong potential to be the fundamental building block of many electronic and opto-electronic applications. The integration and scalable fabrication of such heterostructures is of essence in unleashing the potential of these materials in new technologies. For the first time, we demonstrate the growth of few-layer MoS2 films on graphene via non-aqueous electrodeposition. Through methods such as scanning and transmission electron microscopy, atomic force microscopy, Raman spectroscopy, energy and wavelength dispersive X-ray spectroscopies and X-ray photoelectron spectroscopy, we show that this deposition method can produce large-area MoS2 films with high quality and uniformity over graphene. We reveal the potential of these heterostructures by measuring the photo-induced current through the film. These results pave the way towards develo** the electrodeposition method for the large-scale growth of heterostructures consisting of varying 2D materials for many applications.
△ Less
Submitted 22 November, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
NWChem: Past, Present, and Future
Authors:
E. Aprà,
E. J. Bylaska,
W. A. de Jong,
N. Govind,
K. Kowalski,
T. P. Straatsma,
M. Valiev,
H. J. J. van Dam,
Y. Alexeev,
J. Anchell,
V. Anisimov,
F. W. Aquino,
R. Atta-Fynn,
J. Autschbach,
N. P. Bauman,
J. C. Becca,
D. E. Bernholdt,
K. Bhaskaran-Nair,
S. Bogatko,
P. Borowski,
J. Boschen,
J. Brabec,
A. Bruner,
E. Cauët,
Y. Chen
, et al. (89 additional authors not shown)
Abstract:
Specialized computational chemistry packages have permanently reshaped the landscape of chemical and materials science by providing tools to support and guide experimental efforts and for the prediction of atomistic and electronic properties. In this regard, electronic structure packages have played a special role by using first-principledriven methodologies to model complex chemical and materials…
▽ More
Specialized computational chemistry packages have permanently reshaped the landscape of chemical and materials science by providing tools to support and guide experimental efforts and for the prediction of atomistic and electronic properties. In this regard, electronic structure packages have played a special role by using first-principledriven methodologies to model complex chemical and materials processes. Over the last few decades, the rapid development of computing technologies and the tremendous increase in computational power have offered a unique chance to study complex transformations using sophisticated and predictive many-body techniques that describe correlated behavior of electrons in molecular and condensed phase systems at different levels of theory. In enabling these simulations, novel parallel algorithms have been able to take advantage of computational resources to address the polynomial scaling of electronic structure methods. In this paper, we briefly review the NWChem computational chemistry suite, including its history, design principles, parallel tools, current capabilities, outreach and outlook.
△ Less
Submitted 26 May, 2020; v1 submitted 24 April, 2020;
originally announced April 2020.
-
3D propagation of relativistic solar protons through interplanetary space
Authors:
S. Dalla,
G. De Nolfo,
A. Bruno,
J. Giacalone,
T. Laitinen,
S. Thomas,
M. Battarbee,
M. S. Marsh
Abstract:
Context. Solar Energetic Particles (SEPs) with energy in the GeV range can propagate to Earth from their acceleration region near the Sun and produce Ground Level Enhancements (GLEs). The traditional approach to interpreting and modelling GLE observations assumes particle propagation only parallel to the magnetic field lines of interplanetary space, i.e. it is spatially 1D. Recent measurements by…
▽ More
Context. Solar Energetic Particles (SEPs) with energy in the GeV range can propagate to Earth from their acceleration region near the Sun and produce Ground Level Enhancements (GLEs). The traditional approach to interpreting and modelling GLE observations assumes particle propagation only parallel to the magnetic field lines of interplanetary space, i.e. it is spatially 1D. Recent measurements by PAMELA have characterised SEP properties at 1 AU for the ~100 MeV-1 GeV range at high spectral resolution. Aims. We model the transport of GLE-energy solar protons through the Interplanetary Magnetic Field (IMF) using a 3D approach, to assess the effect of the Heliospheric Current Sheet (HCS) and drifts associated to the gradient and curvature of the Parker spiral. The latter are influenced by the IMF polarity. We derive 1 AU observables and compare the simulation results with data from PAMELA. Methods. We use a 3D test particle model including a HCS. Monoenergetic populations are studied first to obtain a qualitative picture of propagation patterns and numbers of crossings of the 1 AU sphere. Simulations for power law injection are used to derive intensity profiles and fluence spectra at 1 AU. A simulation for a specific event, GLE 71, is used to compare with PAMELA data. Results. Spatial patterns of 1 AU crossings and the average number of crossings are strongly influenced by 3D effects, with significant differences between periods of A+ and A- polarities. The decay time constant of 1 AU intensity profiles varies depending on the polarity and position of the observer, and it is not a simple function of the mean free path as in 1D models. Energy dependent leakage from the injection flux tube is particularly important for GLE energy particles, in many cases resulting in a roll-over in the fluence spectrum.
△ Less
Submitted 20 May, 2020; v1 submitted 3 February, 2020;
originally announced February 2020.
-
Direct and real-time analysis in a plasma reactor using a compact FTICR/MS: degradation of acetone in nitrogen and by-products formation
Authors:
Sébastien Thomas,
Nicole Blin-Simiand,
Michel Heninger,
Pascal Jeanney,
Joël Lemaire,
Lionel Magne,
Helene Mestdagh,
Stephane Pasquiers,
Essyllt Louarn
Abstract:
Methods for reduction of Volatile Organic Compounds (VOCs) content in air depend on the 10 application considered. For low concentration and low flux, non-thermal plasma methods are often considered as efficient. However, the complex chemistry involved is still not well understood as there is a lack of datasets of byproducts formation. So as to overcome this issue, rapid analytical methods are nee…
▽ More
Methods for reduction of Volatile Organic Compounds (VOCs) content in air depend on the 10 application considered. For low concentration and low flux, non-thermal plasma methods are often considered as efficient. However, the complex chemistry involved is still not well understood as there is a lack of datasets of byproducts formation. So as to overcome this issue, rapid analytical methods are needed. We present the coupling of a rapid chemical ionization mass spectrometer (CIMS) for the real-time analysis of the VOCs formed during a degradation experiment. The high resolution instrument used 15 allows for chemical ionization and direct quantification of non-targeted compounds. We present degradation experiments of acetone in a photo-triggered nitrogen plasma discharge. Two regimes were highlighted: efficient conversion at low concentrations (<100ppm) and moderate efficiency conversion at higher concentrations (>100ppm). Those two regimes were clearly delimited as the sum of two exponential curves occuring at respectively low and high concentrations. Many by-products were detected, in 20 particular HCN presented a significantly high yield. Nitrile compounds (acetonitrile, propionitrile,...) are formed as well. To a lower extent, ketene, acetaldehyde and formaldehyde are observed. The association of the high resolution mass spectrometer to the plasma reactor will allow further insights into the plasma chemistry and comparison to modelisation.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Scientific opportunies for bERLinPro 2020+, report with ideas and conclusions from bERLinProCamp 2019
Authors:
Thorsten Kamps,
Michael Abo-Bakr,
Andreas Adelmann,
Kevin Andre,
Deepa Angal-Kalinin,
Felix Armborst,
Andre Arnold,
Michaela Arnold,
Raymond Amador,
Stephen Benson,
Yulia Choporova,
Illya Drebot,
Ralph Ernstdorfer,
Pavel Evtushenko,
Kathrin Goldammer,
Andreas Jankowiak,
Georg Hofftstaetter,
Florian Hug,
Ji-Gwang Hwang,
Lee Jones,
Julius Kuehn,
Jens Knobloch,
Bettina Kuske,
Andre Lampe,
Sonal Mistry
, et al. (16 additional authors not shown)
Abstract:
The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL…
▽ More
The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL as driver for future light sources by setting up the bERLinPro (Berlin ERL Project) ERL with 50 MeV beam energy and high average current. The project is close to reach its major milestone in 2020, acceleration and recovery of a high brightness electron beam.
The goal of bERLinProCamp 2019 was to discuss scientific opportunities for bERLinPro 2020+. bERLinProCamp 2019 was held on Tue, 17.09.2019 at Helmholtz-Zentrum Berlin, Berlin, Germany. This paper summarizes the main themes and output of the workshop.
△ Less
Submitted 8 January, 2020; v1 submitted 2 October, 2019;
originally announced October 2019.
-
Investigating the real-time dissolution of a compositionally complex alloy using inline ICP and correlation with XPS
Authors:
Yao Qiu,
Ruiliang Liu,
Thomas Gengenbach,
Oumaïma Gharbi,
Sanjay Choudhary,
Sebastian Thomas,
Hamish L. Fraser,
Nick Birbilis
Abstract:
The real-time dissolution of the single-phase compositionally complex alloy (CCA), Al1.5TiVCr, was studied using an inline inductively coupled plasma method. Compositionally complex alloys (CCAs), a term encompassing high entropy alloys (HEAs) or multi-principal element alloys (MPEAs), are - in general - noted for their inherently high corrosion resistance. In order to gain an insight into the dis…
▽ More
The real-time dissolution of the single-phase compositionally complex alloy (CCA), Al1.5TiVCr, was studied using an inline inductively coupled plasma method. Compositionally complex alloys (CCAs), a term encompassing high entropy alloys (HEAs) or multi-principal element alloys (MPEAs), are - in general - noted for their inherently high corrosion resistance. In order to gain an insight into the dissolution of Al1.5TiVCr alloy, atomic emission spectroelectrochemistry was utilised in order to measure the ion dissolution of the alloy during anodic polarisation. It was revealed that incongruent dissolution occurred, with preferential dissolution of Al, and essentially no dissolution of Ti, until the point of alloy breakdown. Results were correlated with X-ray photoelectron spectroscopy, which revealed a complex surface oxide inclusive of unoxidised metal, and metal oxides in disproportion to the bulk alloying element ratio.
△ Less
Submitted 13 August, 2019;
originally announced August 2019.
-
A Continuum Multi-Disconnection-Mode Model for Grain Boundary Migration
Authors:
Chaozhen Wei,
Spencer L. Thomas,
Jian Han,
David J. Srolovitz,
Yang Xiang
Abstract:
We study the Grain Boundary (GB) migration based on the underlying disconnection structure and mechanism. Disconnections are line defects that lie solely within a GB and are characterized by both a Burgers vector and a step height, as set by the GB bicrystallography. Multiple disconnection modes can nucleate, as determined by their formation energy barriers and temperature, and move along the GB u…
▽ More
We study the Grain Boundary (GB) migration based on the underlying disconnection structure and mechanism. Disconnections are line defects that lie solely within a GB and are characterized by both a Burgers vector and a step height, as set by the GB bicrystallography. Multiple disconnection modes can nucleate, as determined by their formation energy barriers and temperature, and move along the GB under different kinds of competing driving forces including shear stress and chemical potential jumps across the GBs. We present a continuum model in two dimensions for GB migration where the GB migrates via the thermally-activated nucleation and kinetically-driven motion of disconnections. We perform continuum numerical simulations for investigating the GB migration behavior in single and multi-mode disconnection limits in both a bicrystal (under two types of boundary conditions) and for a finite-length GB with pinned ends. The results clearly demonstrate the significance of including the coupling and competing between different disconnection modes and driving forces for describing the complex and diverse phenomena of GB migration within polycyrstalline microstructures.
△ Less
Submitted 31 May, 2019;
originally announced May 2019.
-
Raman Quantum Memory with Built-In Suppression of Four-wave Mixing Noise
Authors:
Sarah E. Thomas,
Thomas M. Hird,
Joseph H. D. Munns,
Benjamin Brecht,
Dylan J. Saunders,
Joshua Nunn,
Ian A. Walmsley,
Patrick M. Ledingham
Abstract:
Quantum memories are essential for large-scale quantum information networks. Along with high efficiency, storage lifetime and optical bandwidth, it is critical that the memory add negligible noise to the recalled signal. A common source of noise in optical quantum memories is spontaneous four-wave mixing. We develop and implement a technically simple scheme to suppress this noise mechanism by mean…
▽ More
Quantum memories are essential for large-scale quantum information networks. Along with high efficiency, storage lifetime and optical bandwidth, it is critical that the memory add negligible noise to the recalled signal. A common source of noise in optical quantum memories is spontaneous four-wave mixing. We develop and implement a technically simple scheme to suppress this noise mechanism by means of quantum interference. Using this scheme with a Raman memory in warm atomic vapour we demonstrate over an order of magnitude improvement in noise performance. Furthermore we demonstrate a method to quantify the remaining noise contributions and present a route to enable further noise suppression. Our scheme opens the way to quantum demonstrations using a broadband memory, significantly advancing the search for scalable quantum photonic networks.
△ Less
Submitted 30 April, 2019;
originally announced May 2019.
-
High-Resolution Hydrogen Spectroscopy and the Proton Radius Puzzle
Authors:
Simon Thomas,
Hélène Fleurbaey,
Sandrine Galtier,
Lucile Julien,
François Biraben,
François Nez
Abstract:
High resolution spectroscopy of the hydrogen atom takes on particular importance in the new SI, as it allows to accurately determine fundamental constants, such as the Rydberg constant and the proton charge radius. Recently, the second most precisely measured transition frequency in hydrogen, 1S - 3S, was obtained in our group. In the context of the Proton Radius Puzzle, this result calls for furt…
▽ More
High resolution spectroscopy of the hydrogen atom takes on particular importance in the new SI, as it allows to accurately determine fundamental constants, such as the Rydberg constant and the proton charge radius. Recently, the second most precisely measured transition frequency in hydrogen, 1S - 3S, was obtained in our group. In the context of the Proton Radius Puzzle, this result calls for further investigation.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Precision Inclusive Higgs Physics at $e^+e^-$ Colliders With Tracking Detectors and Without Calorimetry
Authors:
Patrick Draper,
Jonathan Kozaczuk,
Scott Thomas
Abstract:
A primary goal of a future $e^+e^-$ collider program will be the precision measurement of Higgs boson properties. For practical reasons it is of interest to determine the minimal set of detector specifications required to reach this and other scientific goals. Such information could be useful in develo** a staged approach to the full collider project with an initial lower-cost version focused on…
▽ More
A primary goal of a future $e^+e^-$ collider program will be the precision measurement of Higgs boson properties. For practical reasons it is of interest to determine the minimal set of detector specifications required to reach this and other scientific goals. Such information could be useful in develo** a staged approach to the full collider project with an initial lower-cost version focused on achieving some of the primary scientific objectives. Here we investigate the precision obtainable for the $e^+ e^- \rightarrow Z h \rightarrow μ^+ μ^- X$ inclusive cross section and the Higgs boson mass using the di-muon recoil method, considering a detector that has only an inner tracking system within a solenoidal magnetic field, surrounded by many nuclear interaction lengths of absorbing material, and an outer muon identification system. We find that the sensitivity achievable in these measurements with such a tracking detector is only marginally reduced compared to that expected for a general purpose detector with additional electromagnetic and hadronic calorimeter systems. The difference results mainly from multi-photon backgrounds that are not as easily rejected with tracking detectors. We also comment on the prospects for an analogous measurement of the inclusive cross section $σ( e^+ e^- \to Z h \to e^+ e^- X)$. Finally, we study searches for light scalars utilizing the di-muon recoil method, estimating the projected reach with a tracking and general purpose detector.
△ Less
Submitted 19 December, 2018;
originally announced December 2018.
-
Calibration of photomultiplier using UVLED
Authors:
Sungrae Im,
Bokkyun Shin,
Ikeda Daisuke,
Stan Thomas,
ByungGu Cheon
Abstract:
Detector calibration is very important for the long-term operation. For the purposes of simple and precise calibration, we developed a new portable calibration source using UVLED to calibrate the fluorescence detector of the Telescope Array experiment (TA). The UVLED is light (less than 1 kg) and its setup is quick and easy. Therefore, a single source will be used instead of the calibration source…
▽ More
Detector calibration is very important for the long-term operation. For the purposes of simple and precise calibration, we developed a new portable calibration source using UVLED to calibrate the fluorescence detector of the Telescope Array experiment (TA). The UVLED is light (less than 1 kg) and its setup is quick and easy. Therefore, a single source will be used instead of the calibration sources that TA currently uses. The UVLED emits 369 nm wavelength and ~70 pJ of photons which are calibrated with 5% accuracy us-ing photo-diode. It has a particular unit, which is an internal heater, to keep the temperature constant and avoiding temperature dependency on light yield. The first result of calibration for 24 detectors is xx pho-tons/faced count for 369 nm photons with 6% uncertainty. It is in agreement with the result of the current calibration sources of TA.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Commissioning of the BRIKEN detector for the measurement of very exotic beta-delayed neutron emitters
Authors:
A. Tolosa-Delgado,
J. Agramunt,
J. L. Tain,
A. Algora,
C. Domingo-Pardo,
A. I. Morales,
B. Rubio,
A. Tarifeno-Saldivia,
F. Calvino,
G. Cortes,
N. T. Brewer,
B. C. Rasco,
K. P. Rykaczewski,
D. W. Stracener,
J. M. Allmond,
R. Grzywacz,
R. Yokoyama,
M. Singh,
T. King,
M. Madurga,
S. Nishimura,
V. H. Phong,
S. Go,
J. Liu,
K. Matsui
, et al. (41 additional authors not shown)
Abstract:
A new detection system has been installed at the RIKEN Nishina Center (Japan) to investigate decay properties of very neutron-rich nuclei. The setup consists of three main parts: a moderated neutron counter, a detection system sensitive to the implantation and decay of radioactive ions, and gamma-ray detectors. We describe here the setup, the commissioning experiment and some selected results demo…
▽ More
A new detection system has been installed at the RIKEN Nishina Center (Japan) to investigate decay properties of very neutron-rich nuclei. The setup consists of three main parts: a moderated neutron counter, a detection system sensitive to the implantation and decay of radioactive ions, and gamma-ray detectors. We describe here the setup, the commissioning experiment and some selected results demonstrating its performance for the measurement of half-lives and beta-delayed neutron emission probabilities. The methodology followed in the analysis of the data is described in detail. Particular emphasis is placed on the correction of the accidental neutron background.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
New measurement of the $1S-3S$ transition frequency of hydrogen: contribution to the proton charge radius puzzle
Authors:
Hélène Fleurbaey,
Sandrine Galtier,
Simon Thomas,
Marie Bonnaud,
Lucile Julien,
François Biraben,
François Nez,
Michel Abgrall,
Jocelyne Guéna
Abstract:
We present a new measurement of the $1S-3S$ two-photon transition frequency of hydrogen, realized with a continuous-wave excitation laser at 205 nm on a room-temperature atomic beam, with a relative uncertainty of $9\times10^{-13}$. The proton charge radius deduced from this measurement, $r_\text{p}=0.877(13)$ fm, is in very good agreement with the current CODATA-recommended value. This result con…
▽ More
We present a new measurement of the $1S-3S$ two-photon transition frequency of hydrogen, realized with a continuous-wave excitation laser at 205 nm on a room-temperature atomic beam, with a relative uncertainty of $9\times10^{-13}$. The proton charge radius deduced from this measurement, $r_\text{p}=0.877(13)$ fm, is in very good agreement with the current CODATA-recommended value. This result contributes to the ongoing search to solve the proton charge radius puzzle, which arose from a discrepancy between the CODATA value and a more precise determination of $r_\text{p}$ from muonic hydrogen spectroscopy.
△ Less
Submitted 27 April, 2018; v1 submitted 26 January, 2018;
originally announced January 2018.
-
Gamma-ray Showers Observed at Ground Level in Coincidence With Downward Lightning Leaders
Authors:
R. U. Abbasi,
T. Abu-Zayyad,
M. Allen,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
M. Byrne,
R. Cady,
B. G. Cheon,
J. Chiba,
M. Chikawa,
T. Fujii,
M. Fukushima,
G. Furlich,
T. Goto,
W. Hanlon,
Y. Hayashi,
N. Hayashida,
K. Hibino,
K. Honda,
D. Ikeda,
N. Inoue,
T. Ishii,
H. Ito
, et al. (99 additional authors not shown)
Abstract:
Bursts of gamma ray showers have been observed in coincidence with downward propagating negative leaders in lightning flashes by the Telescope Array Surface Detector (TASD). The TASD is a 700~square kilometer cosmic ray observatory located in southwestern Utah, U.S.A. In data collected between 2014 and 2016, correlated observations showing the structure and temporal development of three shower-pro…
▽ More
Bursts of gamma ray showers have been observed in coincidence with downward propagating negative leaders in lightning flashes by the Telescope Array Surface Detector (TASD). The TASD is a 700~square kilometer cosmic ray observatory located in southwestern Utah, U.S.A. In data collected between 2014 and 2016, correlated observations showing the structure and temporal development of three shower-producing flashes were obtained with a 3D lightning map** array, and electric field change measurements were obtained for an additional seven flashes, in both cases co-located with the TASD. National Lightning Detection Network (NLDN) information was also used throughout. The showers arrived in a sequence of 2--5 short-duration ($\le$10~$μ$s) bursts over time intervals of several hundred microseconds, and originated at an altitude of $\simeq$3--5 kilometers above ground level during the first 1--2 ms of downward negative leader breakdown at the beginning of cloud-to-ground lightning flashes. The shower footprints, associated waveforms and the effect of atmospheric propagation indicate that the showers consist primarily of downward-beamed gamma radiation. This has been supported by GEANT simulation studies, which indicate primary source fluxes of $\simeq$$10^{12}$--$10^{14}$ photons for $16^{\circ}$ half-angle beams. We conclude that the showers are terrestrial gamma-ray flashes (TGFs), similar to those observed by satellites, but that the ground-based observations are more representative of the temporal source activity and are also more sensitive than satellite observations, which detect only the most powerful TGFs.
△ Less
Submitted 18 May, 2018; v1 submitted 17 May, 2017;
originally announced May 2017.
-
Prefer Nested Segmentation to Compound Segmentation
Authors:
Haley D. Clark,
Stefan A. Reinsberg,
Vitali Moiseenko,
Jonn Wu,
Steven D. Thomas
Abstract:
Introduction: Intra-organ radiation dose sensitivity is becoming increasingly relevant in clinical radiotherapy. One method for assessment involves partitioning delineated regions of interest and comparing the relative contributions or importance to clinical outcomes. We show that an intuitive method for dividing organ contours, compound (sub-)segmentation, can unintentionally lead to sub-segments…
▽ More
Introduction: Intra-organ radiation dose sensitivity is becoming increasingly relevant in clinical radiotherapy. One method for assessment involves partitioning delineated regions of interest and comparing the relative contributions or importance to clinical outcomes. We show that an intuitive method for dividing organ contours, compound (sub-)segmentation, can unintentionally lead to sub-segments with inconsistent volumes, which will bias relative importance assessment. An improved technique, nested segmentation, is introduced and compared. Methods: Clinical radiotherapy planning parotid contours from 510 patients were segmented. Counts of radiotherapy dose matrix voxels interior to sub-segments were used to determine the equivalency of sub-segment volumes. The distribution of voxel counts within sub-segments were compared using Kolmogorov-Smirnov tests and characterized by their dispersion. Analytical solutions for 2D/3D analogues were derived and sub-segment area/volume were compared directly. Results: Both parotid and 2D/3D region of interest analogue segmentation confirmed compound segmentation intrinsically produces sub-segments with volumes that depend on the region of interest shape and selection location. Significant volume differences were observed when sub-segmenting parotid contours into 18ths, and vanishingly small sub-segments were observed when sub-segmenting into 96ths. Central sub-segments were considerably smaller than sub-segments on the periphery. Nested segmentation did not exhibit these shortcomings and produced sub-segments with equivalent volumes when dose grid and contour collinearity was addressed, even when dividing the parotid into 96ths. Nested segmentation was always faster or equivalent in runtime to compound segmentation. Conclusions: Nested segmentation is more suited than compound segmentation for analyses requiring equal weighting of sub-segments.
△ Less
Submitted 3 May, 2017;
originally announced May 2017.
-
High Efficiency Raman Memory by Suppressing Radiation Trap**
Authors:
S. E. Thomas,
J. H. D. Munns,
K. T. Kaczmarek,
C. Qiu,
B. Brecht,
A. Feizpour,
P. M. Ledingham,
I. A. Walmsley,
J. Nunn,
D. J. Saunders
Abstract:
Raman interactions in alkali vapours are used in applications such as atomic clocks, optical signal processing, generation of squeezed light and Raman quantum memories for temporal multiplexing. To achieve a strong interaction the alkali ensemble needs both a large optical depth and a high level of spin-polarisation. We implement a technique known as quenching using a molecular buffer gas which al…
▽ More
Raman interactions in alkali vapours are used in applications such as atomic clocks, optical signal processing, generation of squeezed light and Raman quantum memories for temporal multiplexing. To achieve a strong interaction the alkali ensemble needs both a large optical depth and a high level of spin-polarisation. We implement a technique known as quenching using a molecular buffer gas which allows near-perfect spin-polarisation of over $99.5\%$ in caesium vapour at high optical depths of up to $\sim 2 \times 10^5$; a factor of 4 higher than can be achieved without quenching. We use this system to explore efficient light storage with high gain in a GHz bandwidth Raman memory.
△ Less
Submitted 1 February, 2017; v1 submitted 12 October, 2016;
originally announced October 2016.
-
Comparison of different eigensolvers for calculating vibrational spectra using low-rank, sum-of-product basis functions
Authors:
Arnaud Leclerc,
Phillip S. Thomas,
Tucker Carrington
Abstract:
Vibrational spectra and wavefunctions of polyatomic molecules can be calculated at low memory cost using low-rank sum-of-product (SOP) decompositions to represent basis functions generated using an iterative eigensolver. Using a SOP tensor format does not determine the iterative eigensolver. The choice of the interative eigensolver is limited by the need to restrict the rank of the SOP basis funct…
▽ More
Vibrational spectra and wavefunctions of polyatomic molecules can be calculated at low memory cost using low-rank sum-of-product (SOP) decompositions to represent basis functions generated using an iterative eigensolver. Using a SOP tensor format does not determine the iterative eigensolver. The choice of the interative eigensolver is limited by the need to restrict the rank of the SOP basis functions at every stage of the calculation. We have adapted, implemented and compared different reduced-rank algorithms based on standard iterative methods (block-Davidson algorithm, Chebyshev iteration) to calculate vibrational energy levels and wavefunctions of the 12-dimensional acetonitrile molecule. The effect of using low-rank SOP basis functions on the different methods is analyzed and the numerical results are compared with those obtained with the reduced rank block power method introduced in J. Chem. Phys. 140, 174111 (2014). Relative merits of the different algorithms are presented, showing that the advantage of using a more sophisticated method, although mitigated by the use of reduced-rank sum-of-product functions, is noticeable in terms of CPU time.
△ Less
Submitted 11 October, 2016;
originally announced October 2016.
-
Measurement of the magnetic field profile in the atomic fountain clock FoCS-2 using Zeeman spectroscopy
Authors:
Devenoges Laurent,
Di Domenico Gianni,
Stefanov André,
Jallageas Antoine,
Morel Jacques,
Südmeyer Thomas,
Thomann Pierre
Abstract:
We report the evaluation of the second order Zeeman shift in the continuous atomic fountain clock FoCS-2. Because of the continuous operation and of its geometrical constraints, the methods used in pulsed fountains are not applicable. We use here time-resolved Zeeman spectroscopy to probe the magnetic field profile in the clock. The pulses of ac magnetic excitation allow us to spatially resolve th…
▽ More
We report the evaluation of the second order Zeeman shift in the continuous atomic fountain clock FoCS-2. Because of the continuous operation and of its geometrical constraints, the methods used in pulsed fountains are not applicable. We use here time-resolved Zeeman spectroscopy to probe the magnetic field profile in the clock. The pulses of ac magnetic excitation allow us to spatially resolve the Zeeman frequency and to evaluate the Zeeman shift with a relative uncertainty smaller than 10E-16.
△ Less
Submitted 13 December, 2016; v1 submitted 25 August, 2016;
originally announced August 2016.
-
Designs for a Quantum Electron Microscope
Authors:
Pieter Kruit,
Richard G. Hobbs,
Chung-Soo Kim,
Yujia Yang,
Vitor R. Manfrinato,
Jacob Hammer,
Sebastian Thomas,
Philipp Weber,
Brannon Klopfer,
Christoph Kohstall,
Thomas Juffmann,
Mark A. Kasevich,
Peter Hommelhoff,
Karl K. Berggren
Abstract:
One of the astounding consequences of quantum mechanics is that it allows the detection of a target using an incident probe, with only a low probability of interaction of the probe and the target. This 'quantum weirdness' could be applied in the field of electron microscopy to generate images of beam-sensitive specimens with substantially reduced damage to the specimen. A reduction of beam-induced…
▽ More
One of the astounding consequences of quantum mechanics is that it allows the detection of a target using an incident probe, with only a low probability of interaction of the probe and the target. This 'quantum weirdness' could be applied in the field of electron microscopy to generate images of beam-sensitive specimens with substantially reduced damage to the specimen. A reduction of beam-induced damage to specimens is especially of great importance if it can enable imaging of biological specimens with atomic resolution. Following a recent suggestion that interaction-free measurements are possible with electrons, we now analyze the difficulties of actually building an atomic resolution interaction-free electron microscope, or "quantum electron microscope". A quantum electron microscope would require a number of unique components not found in conventional transmission electron microscopes. These components include a coherent electron-beam splitter or two-state-coupler, and a resonator structure to allow each electron to interrogate the specimen multiple times, thus supporting high success probabilities for interaction-free detection of the specimen. Different system designs are presented here, which are based on four different choices of two-state-couplers: a thin crystal, a grating mirror, a standing light wave and an electro-dynamical pseudopotential. Challenges for the detailed electron optical design are identified as future directions for development. While it is concluded that it should be possible to build an atomic resolution quantum electron microscope, we have also identified a number of hurdles to the development of such a microscope and further theoretical investigations that will be required to enable a complete interpretation of the images produced by such a microscope.
△ Less
Submitted 20 October, 2015;
originally announced October 2015.
-
The effect of hydrostatic pressure and uniaxial strain on the electronic structure of Pb$_{\text{1-x}}$Sn$_{\text{x}}$Te
Authors:
Matthias Geilhufe,
Sanjeev K. Nayak,
Stefan Thomas,
Markus Däne,
Gouri S. Tripathi,
Peter Entel,
Wolfram Hergert,
Arthur Ernst
Abstract:
The electronic structure of Pb$_{1-x}$Sn$_{x}$Te is studied by using the relativistic Korringa-Kohn-Rostoker Green function method in the framework of density functional theory. For all concentrations $x$, Pb$_{1-x}$Sn$_{x}$Te is a direct semiconductor with a narrow band gap. In contrast to pure lead telluride, tin telluride shows an inverted band characteristic close to the Fermi energy. It will…
▽ More
The electronic structure of Pb$_{1-x}$Sn$_{x}$Te is studied by using the relativistic Korringa-Kohn-Rostoker Green function method in the framework of density functional theory. For all concentrations $x$, Pb$_{1-x}$Sn$_{x}$Te is a direct semiconductor with a narrow band gap. In contrast to pure lead telluride, tin telluride shows an inverted band characteristic close to the Fermi energy. It will be shown that this particular property can be tuned, first, by alloying PbTe and SnTe and, second, by applying hydrostatic pressure or uniaxial strain. Furthermore, the magnitude of strain needed to switch between the regular and inverted band gap can be tuned by the alloy composition. Thus, there is range of potential usage of Pb$_{1-x}$Sn$_{x}$Te for spintronic applications.
△ Less
Submitted 17 August, 2015;
originally announced August 2015.
-
Optical channel waveguides written by high repetition rate femtosecond laser irradiation in Li-Zn fluoroborate glass
Authors:
Sunil Thomas,
T. Toney Fernandez,
Javier Solis,
P. R. Biju,
N. V. Unnikrishnan
Abstract:
Low loss, optical channel waveguides have been successfully produced by high repetition rate, femtosecond laser inscription in a Li-Zn fluoroborate glass (64.9B2O3 + 25Li2O + 10ZnF2 + 0.1Er2O3). High quality waveguides were produced at 500 kHz, 1 MHz and 2 MHz laser repetition rates, showing a refractive index contrast in the range of 3-6 x 10-3 depending on various fluences. Dependence of experim…
▽ More
Low loss, optical channel waveguides have been successfully produced by high repetition rate, femtosecond laser inscription in a Li-Zn fluoroborate glass (64.9B2O3 + 25Li2O + 10ZnF2 + 0.1Er2O3). High quality waveguides were produced at 500 kHz, 1 MHz and 2 MHz laser repetition rates, showing a refractive index contrast in the range of 3-6 x 10-3 depending on various fluences. Dependence of experimental parameters such as average laser power, pulse repetition rate and writing speed on the properties of fabricated waveguides has been discussed. The comparison of optical and compositional characterization techniques evidences an enrichment of B and Zn in the guiding region, while F migrates to the heat diffused region of the written structure.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
Large optical field enhancement for nanotips with large opening angles
Authors:
Sebastian Thomas,
Georg Wachter,
Christoph Lemell,
Joachim Burgdörfer,
Peter Hommelhoff
Abstract:
We theoretically investigate the dependence of the enhancement of optical near-fields at nanometric tips on the shape, size, and material of the tip. We confirm a strong dependence of the field enhancement factor on the radius of curvature. In addition, we find a surprisingly strong increase of field enhancement with increasing opening angle of the nanotips. For gold and tungsten nanotips in the e…
▽ More
We theoretically investigate the dependence of the enhancement of optical near-fields at nanometric tips on the shape, size, and material of the tip. We confirm a strong dependence of the field enhancement factor on the radius of curvature. In addition, we find a surprisingly strong increase of field enhancement with increasing opening angle of the nanotips. For gold and tungsten nanotips in the experimentally relevant parameter range (radius of curvature $\geq 5\,$nm at $800\,$nm laser wavelength), we obtain field enhancement factors of up to ${\sim}35$ for Au and ${\sim}12$ for W for large opening angles. We confirm this strong dependence on the opening angle for many other materials featuring a wide variety in their dielectric response. For dielectrics, the opening angle dependence is traced back to the electrostatic force of the induced surface charge at the tip shank. For metals, the plasmonic response strongly increases the field enhancement and shifts the maximum field enhancement to smaller opening angles.
△ Less
Submitted 22 January, 2015; v1 submitted 28 December, 2014;
originally announced December 2014.
-
A microwave chip-based beam splitter for low-energy guided electrons
Authors:
Jakob Hammer,
Sebastian Thomas,
Philipp Weber,
Peter Hommelhoff
Abstract:
We demonstrate the splitting of a low-energy electron beam by means of a microwave pseudopotential formed above a planar chip substrate. Beam splitting arises from smoothly transforming the transverse guiding potential for an electron beam from a single-well harmonic confinement into a double-well, thereby generating two separated output beams with $5\,$mm lateral spacing. Efficient beam splitting…
▽ More
We demonstrate the splitting of a low-energy electron beam by means of a microwave pseudopotential formed above a planar chip substrate. Beam splitting arises from smoothly transforming the transverse guiding potential for an electron beam from a single-well harmonic confinement into a double-well, thereby generating two separated output beams with $5\,$mm lateral spacing. Efficient beam splitting is observed for electron kinetic energies up to $3\,$eV, in excellent agreement with particle tracking simulations. We discuss prospects of this novel beam splitter approach for electron-based quantum matter-wave optics experiments.
△ Less
Submitted 18 May, 2015; v1 submitted 12 August, 2014;
originally announced August 2014.
-
SCUBA-2: The 10000 pixel bolometer camera on the James Clerk Maxwell Telescope
Authors:
W. S. Holland,
D. Bintley,
E. L. Chapin,
A. Chrysostomou,
G. R. Davis,
J. T. Dempsey,
W. D. Duncan,
M. Fich,
P. Friberg,
M. Halpern,
K. D. Irwin,
T. Jenness,
B. D. Kelly,
M. J. MacIntosh,
E. I. Robson,
D. Scott,
P. A. R. Ade,
E. Atad-Ettedgui,
D. S. Berry,
S. C. Craig,
X. Gao,
A. G. Gibb,
G. C. Hilton,
M. I. Hollister,
J. B. Kycia
, et al. (24 additional authors not shown)
Abstract:
SCUBA-2 is an innovative 10000 pixel bolometer camera operating at submillimetre wavelengths on the James Clerk Maxwell Telescope (JCMT). The camera has the capability to carry out wide-field surveys to unprecedented depths, addressing key questions relating to the origins of galaxies, stars and planets. With two imaging arrays working simultaneously in the atmospheric windows at 450 and 850 micro…
▽ More
SCUBA-2 is an innovative 10000 pixel bolometer camera operating at submillimetre wavelengths on the James Clerk Maxwell Telescope (JCMT). The camera has the capability to carry out wide-field surveys to unprecedented depths, addressing key questions relating to the origins of galaxies, stars and planets. With two imaging arrays working simultaneously in the atmospheric windows at 450 and 850 microns, the vast increase in pixel count means that SCUBA-2 maps the sky 100-150 times faster than the previous SCUBA instrument. In this paper we present an overview of the instrument, discuss the physical characteristics of the superconducting detector arrays, outline the observing modes and data acquisition, and present the early performance figures on the telescope. We also showcase the capabilities of the instrument via some early examples of the science SCUBA-2 has already undertaken. In February 2012, SCUBA-2 began a series of unique legacy surveys for the JCMT community. These surveys will take 2.5 years and the results are already providing complementary data to the shorter wavelength, shallower, larger-area surveys from Herschel. The SCUBA-2 surveys will also provide a wealth of information for further study with new facilities such as ALMA, and future telescopes such as CCAT and SPICA.
△ Less
Submitted 16 January, 2013;
originally announced January 2013.
-
Probing of optical near-fields by electron rescattering on the 1 nm scale
Authors:
Sebastian Thomas,
Michael Krüger,
Michael Förster,
Markus Schenk,
Peter Hommelhoff
Abstract:
We present a new method of measuring optical near-fields within ~1 nm of a metal surface, based on rescattering of photoemitted electrons. With this method, we precisely measure the field enhancement factor for tungsten and gold nanotips as a function of tip radius. The agreement with Maxwell simulations is very good. Further simulations yield a field enhancement map for all materials, which shows…
▽ More
We present a new method of measuring optical near-fields within ~1 nm of a metal surface, based on rescattering of photoemitted electrons. With this method, we precisely measure the field enhancement factor for tungsten and gold nanotips as a function of tip radius. The agreement with Maxwell simulations is very good. Further simulations yield a field enhancement map for all materials, which shows that optical near-fields at nanotips are governed by a geometric effect under most conditions, while plasmon resonances play only a minor role. Last, we consider the implications of our results on quantum mechanical effects near the surface of nanostructures and discuss features of quantum plasmonics.
△ Less
Submitted 16 September, 2013; v1 submitted 24 September, 2012;
originally announced September 2012.
-
Calibration of Photomultiplier Tubes for the Fluorescence Detector of Telescope Array Experiment using a Rayleigh Scattered Laser Beam
Authors:
Shingo Kawana,
Nobuyuki Sakurai,
Toshihiro Fujii,
Masaki Fukushima,
Naoya Inoue,
John N. Matthews,
Shoichi Ogio,
Hiroyuki Sagawa,
Akimichi Taketa,
Masato Takita,
Stan B. Thomas,
Hisao Tokuno,
Yoshiki Tsunesada,
Shigeharu Udo,
Lawrence R. Wiencke
Abstract:
We performed photometric calibration of the PhotoMultiplier Tube (PMT) and readout electronics used for the new fluorescence detectors of the Telescope Array (TA) experiment using Rayleigh scattered photons from a pulsed nitrogen laser beam. The experimental setup, measurement procedure, and results of calibration are described. The total systematic uncertainty of the calibration is estimated to b…
▽ More
We performed photometric calibration of the PhotoMultiplier Tube (PMT) and readout electronics used for the new fluorescence detectors of the Telescope Array (TA) experiment using Rayleigh scattered photons from a pulsed nitrogen laser beam. The experimental setup, measurement procedure, and results of calibration are described. The total systematic uncertainty of the calibration is estimated to be 7.2%. An additional uncertainty of 3.7% is introduced by the transport of the calibrated PMTs from the laboratory to the TA experimental site.
△ Less
Submitted 28 March, 2012; v1 submitted 9 February, 2012;
originally announced February 2012.
-
ISIS2: Pixel Sensor with Local Charge Storage for ILC Vertex Detector
Authors:
Yiming Li,
Chris Damerell,
Rui Gao,
Rhorry Gauld,
Jaya John John,
Peter Murray,
Andrei Nomerotski,
Konstantin Stefanov,
Steve Thomas,
Helena Wilding,
Zhige Zhang
Abstract:
ISIS (In-situ Storage Imaging Sensor) is a novel CMOS sensor with multiple charge storage capability developed for the ILC vertex detector by the Linear Collider Flavour Identification (LCFI) collaboration. This paper reports test results for ISIS2, the second generation of ISIS sensors implemented in a 0.18 micron CMOS process. The local charge storage and charge transfer were unambiguously demon…
▽ More
ISIS (In-situ Storage Imaging Sensor) is a novel CMOS sensor with multiple charge storage capability developed for the ILC vertex detector by the Linear Collider Flavour Identification (LCFI) collaboration. This paper reports test results for ISIS2, the second generation of ISIS sensors implemented in a 0.18 micron CMOS process. The local charge storage and charge transfer were unambiguously demonstrated.
△ Less
Submitted 14 July, 2010; v1 submitted 18 June, 2010;
originally announced June 2010.
-
The LCFIVertex package: vertexing, flavour tagging and vertex charge reconstruction with an ILC vertex detector
Authors:
LCFI Collaboration,
David Bailey,
Erik Devetak,
Mark Grimes,
Kristian Harder,
Sonja Hillert,
David Jackson,
Talini Pinto Jayawardena,
Ben Jeffery,
Tomas Lastovicka,
Clare Lynch,
Victoria Martin,
Roberval Walsh,
Phil Allport,
Yambazi Banda,
Craig Buttar,
Alexandre Cheplakov,
David Cussans,
Chris Damerell,
Nicolo de Groot,
Johan Fopma,
Brian Foster,
Senerath Galagedera,
Rui Gao,
Anthony Gillman
, et al. (36 additional authors not shown)
Abstract:
The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and…
▽ More
The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and for identification of the flavour and charge of the leading hadron in heavy flavour jets. These tools are essential for the ongoing optimisation of the vertex detector design for linear colliders such as the ILC. The paper describes the algorithms implemented in the LCFIVertex package, as well as the scope of the code and its performance for a typical vertex detector design.
△ Less
Submitted 20 August, 2009;
originally announced August 2009.