-
The potential of the ILC beam dump for high-intensity and large-area irradiation field with atmospheric-like neutrons and muons
Authors:
Yasuhito Sakaki,
Shinichiro Michizono,
Nobuhiro Terunuma,
Toshiya Sanami
Abstract:
We evaluate the neutron and muon fluxes produced in the ILC beam dumps by Monte Carlo simulations and discuss their potential use in irradiation fields. We show that the beam dumps can provide high-intensity neutron and muon fluxes with spectra quite similar to secondary cosmic rays, which are suitable for soft error studies. The beam dumps deliver neutrons about $10^{11}$ times the secondary cosm…
▽ More
We evaluate the neutron and muon fluxes produced in the ILC beam dumps by Monte Carlo simulations and discuss their potential use in irradiation fields. We show that the beam dumps can provide high-intensity neutron and muon fluxes with spectra quite similar to secondary cosmic rays, which are suitable for soft error studies. The beam dumps deliver neutrons about $10^{11}$ times the secondary cosmic rays on spaces perpendicular to the beam axis and muons $10^8$ times downstream of the beam dumps in the initial phase of the ILC. Large-area irradiation of 1\,m$^2$ or more is possible. Differences in the energy distribution of muons in electron and positron beam dumps are also discussed for particle physics experiments.
△ Less
Submitted 1 March, 2023; v1 submitted 16 October, 2022;
originally announced October 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Beam halo from Touschek scattering in the KEK Accelerator Test Facility
Authors:
R. Yang,
A. Aryshev,
P. Bambade,
M. Bergamaschi,
K. Kubo,
T. Naito,
N. Terunuma,
S. Wallo,
J. Zhang
Abstract:
Beam halo is one of the crucial issues limiting the machine performance and causing radioactivation in high-intensity accelerators. A clear picture of beam-halo formation is of great importance for successful suppression of the undesired beam loss. We present numerical and experimental studies of transverse and longitudinal halos in the KEK Accelerator Test Facility. The fair accordance between pr…
▽ More
Beam halo is one of the crucial issues limiting the machine performance and causing radioactivation in high-intensity accelerators. A clear picture of beam-halo formation is of great importance for successful suppression of the undesired beam loss. We present numerical and experimental studies of transverse and longitudinal halos in the KEK Accelerator Test Facility. The fair accordance between predictions and observations in various conditions indicates that the Touschek scattering is the dominant mechanism forming the horizontal and momentum halos.
△ Less
Submitted 14 September, 2021;
originally announced September 2021.
-
A sub-micron resolution, bunch-by-bunch beam trajectory feedback system and its application to reducing wakefield effects in single-pass beamlines
Authors:
D. R. Bett,
P. N. Burrows,
C. Perry,
R. Ramjiawan,
N. Terunuma,
K. Kubo,
T. Okugi
Abstract:
A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. The system uses the vertical position of the bunch measured at two beam position monitors (BPMs) to calculate a pair of kicks which are applied to the next bunch using two upstream…
▽ More
A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. The system uses the vertical position of the bunch measured at two beam position monitors (BPMs) to calculate a pair of kicks which are applied to the next bunch using two upstream kickers, thereby correcting both the vertical position and trajectory angle. Using trains of two electron bunches separated in time by 187.6~ns, the system was optimised so as to stabilize the beam offset at the feedback BPMs to better than 350~nm, yielding a local trajectory angle correction to within 250~nrad. The quality of the correction was verified using three downstream witness BPMs and the results were found to be in agreement with the predictions of a linear lattice model used to propagate the beam trajectory from the feedback region. This same model predicts a corrected beam jitter of c.~1~nm at the focal point of the accelerator. Measurements with a beam size monitor at this location demonstrate that reducing the trajectory jitter of the beam by a factor of 4 also reduces the increase in the measured beam size as a function of beam charge by a factor of c.~1.6.
△ Less
Submitted 3 November, 2020; v1 submitted 28 August, 2020;
originally announced August 2020.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Evaluation of Beam Halo from Beam-Gas Scattering at the KEK-ATF
Authors:
R. Yang,
T. Naito,
S. Bai,
A. Aryshev,
K. Kubo,
T. Okugi,
N. Terunuma,
D. Zhou,
A. Faus-Golfe,
V. Kubytskyi,
S. Liu,
S. Wallon
Abstract:
In circular colliders, as well as in dam** rings and synchrotron radiation light sources, beam halo is one of the critical issues limiting the performance as well as potentially causing component damage and activation. It is imperative to clearly understand the mechanisms that lead to halo formation and to test the available theoretical models. Elastic beam-gas scattering can drive particles to…
▽ More
In circular colliders, as well as in dam** rings and synchrotron radiation light sources, beam halo is one of the critical issues limiting the performance as well as potentially causing component damage and activation. It is imperative to clearly understand the mechanisms that lead to halo formation and to test the available theoretical models. Elastic beam-gas scattering can drive particles to large oscillation amplitudes and be a potential source of beam halo. In this paper, numerical estimation and Monte Carlo simulations of this process at the ATF of KEK are presented. Experimental measurements of beam halo in the ATF2 beam line using a diamond sensor detector are also described, which clearly demonstrates the influence of the beam-gas scattering process on the transverse halo distribution.
△ Less
Submitted 22 March, 2018;
originally announced March 2018.
-
Sub - THz Radiation from Dielectric Capillaries with Reflectors
Authors:
K. Lekomtsev,
A. Aryshev,
A. A. Tishchenko,
M. Shevelev,
A. A. Ponomarenko,
P. Karataev,
N. Terunuma,
J. Urakawa
Abstract:
In this report we present experimental investigations of THz radiation generated from a corrugated and a non-corrugated capillary with reflectors, using a femtosecond electron beam of LUCX accelerator at KEK, Japan. We discuss measurements of radiation angular distributions and their comparison with Particle In Cell simulations, and also investigate an off-central propagation of the beam in the ca…
▽ More
In this report we present experimental investigations of THz radiation generated from a corrugated and a non-corrugated capillary with reflectors, using a femtosecond electron beam of LUCX accelerator at KEK, Japan. We discuss measurements of radiation angular distributions and their comparison with Particle In Cell simulations, and also investigate an off-central propagation of the beam in the capillaries based on experimental measurements and simulations.
△ Less
Submitted 24 May, 2017;
originally announced June 2017.
-
Development of optical resonant cavities for laser-Compton scattering
Authors:
T. Akagi,
S. Araki,
Y. Honda,
A. Kosuge,
T. Omori,
H. Shimizu,
N. Terunuma,
J. Urakawa,
T. Takahashi,
R. Tanaka,
Y. Uesugi,
H. Yoshitama,
Y. Hosaka,
K. Sakaue,
M. Washio
Abstract:
We have been develo** optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity.
We have been develo** optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity.
△ Less
Submitted 15 March, 2017;
originally announced March 2017.
-
Monochromaticity of coherent Smith-Purcell radiation from finite size grating
Authors:
A. Aryshev,
A. Potylitsyn,
G. Naumenko,
M. Shevelev,
K. Lekomtsev,
L. Sukhikh,
P. Karataev,
Y. Honda,
N. Terunuma,
J. Urakawa
Abstract:
Investigation of coherent Smith-Purcell Radiation (SPR) spectral characteristics was performed both experimentally and by numerical simulation. The measurement of SPR spectral line shapes of different diffraction orders was carried out at KEK LUCX facility. A pair of room-temperature Schottky barrier diode (SBD) detectors with sensitivity bands of $60-90$~GHz and $320-460$~GHz was used in the meas…
▽ More
Investigation of coherent Smith-Purcell Radiation (SPR) spectral characteristics was performed both experimentally and by numerical simulation. The measurement of SPR spectral line shapes of different diffraction orders was carried out at KEK LUCX facility. A pair of room-temperature Schottky barrier diode (SBD) detectors with sensitivity bands of $60-90$~GHz and $320-460$~GHz was used in the measurements. Reasonable agreement of experimental results and simulations performed with CST Studio Suite justifies the use of different narrow-band SBD detectors to investigate different SPR diffraction orders. It was shown that monochromaticity of the SPR spectral lines increases with diffraction order. The comparison of coherent transition radiation and coherent SPR intensities in sub-THz frequency range showed that the brightnesses of both radiation mechanisms were comparable. A fine tuning feasibility of the SPR spectral lines is discussed.
△ Less
Submitted 11 January, 2017;
originally announced January 2017.
-
In vacuum diamond sensor scanner for beam halo measurements in the beam line at the KEK Accelerator Test Facility
Authors:
Shan Liu,
Frederic Bogard,
Patrick Cornebise,
Angeles Faus-Golfe,
Nuria Fuster-Martínez,
Erich Griesmayer,
Hayg Guler,
Viacheslav Kubytskyi,
Christophe Sylvia,
Tauchi Toshiaki,
Nobuhiro Terunuma,
Philip Bambade
Abstract:
The investigation of beam halo transverse distributions is important for the understanding of beam losses and the control of backgrounds in Future Linear Colliders (FLC). A novel in vacuum diamond sensor (DSv) scanner with four strips has been designed and developed for the investigation of the beam halo transverse distributions and also for the diagnostics of Compton recoil electrons after the in…
▽ More
The investigation of beam halo transverse distributions is important for the understanding of beam losses and the control of backgrounds in Future Linear Colliders (FLC). A novel in vacuum diamond sensor (DSv) scanner with four strips has been designed and developed for the investigation of the beam halo transverse distributions and also for the diagnostics of Compton recoil electrons after the interaction point (IP) of ATF2, a low energy (1.3 GeV) prototype of the final focus system for the ILC and CLIC linear collider projects. Using the DSv, a dynamic range of $\sim10^6$ has been successfully demonstrated and confirmed for the first time by simultaneous beam core ($\sim10^9$ electrons) and beam halo ($\sim10^3$ electrons) measurements at ATF2. This report presents the characterization, performance studies and tests of the diamond sensors using an $α$ source as well as using the electron beams at PHIL, a low energy ($< 10$ MeV) photo-injector at LAL, and at ATF2. First beam halo measurement results using the DSv at ATF2 with different beam intensities and vacuum levels are also presented. Such measurements not only allow one to evaluate the different sources of beam halo generation but also to define the requirements for a suitable collimation system to be installed at ATF2, as well as to optimize its performance during future operation.
△ Less
Submitted 25 December, 2015;
originally announced December 2015.
-
Femtosecond response time measurements of a Cs2Te photocathode
Authors:
A. Aryshev,
M. Shevelev,
Y. Honda,
N. Terunuma,
J. Urakawa
Abstract:
We present the response time measurements of a Cs2Te photocathode illuminated with two 100 fs duration, variable time separation laser pulses at 266 nm wavelength. The response time was confirmed in dispersive region downstream of a 12-cell standing wave S-band acceleration structure using a well-known RF zero-crossing technique. At the same time it was also measured by changing mechanical path-le…
▽ More
We present the response time measurements of a Cs2Te photocathode illuminated with two 100 fs duration, variable time separation laser pulses at 266 nm wavelength. The response time was confirmed in dispersive region downstream of a 12-cell standing wave S-band acceleration structure using a well-known RF zero-crossing technique. At the same time it was also measured by changing mechanical path-length difference between two micro-bunches. Both methods agree that Cs2Te photocathode time response is of the order of 250 fs and thereby it is possible to generate and control a THz sequence of relativistic electron bunches by a conventional S-band RF gun. This result further opens a possibility to construct wide-range tunable THz FEL.
△ Less
Submitted 10 January, 2017; v1 submitted 12 July, 2015;
originally announced July 2015.
-
Experimental and Theoretical Progress of Linear Collider Final Focus Design and ATF2 Facility
Authors:
Andrei Seryi,
Rogelio Tomas,
Frank Zimmermann,
Kiyoshi Kubo,
Shigeru Kuroda,
Toshiyuki Okugi,
Toshiaki Tauchi,
Nobuhiro Terunuma,
Junji Urakawa,
Glen White,
Mark Woodley,
Deepa Angal-Kalinin
Abstract:
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
Laserwire at the Accelerator Test Facility 2 with Sub-Micrometre Resolution
Authors:
L. J. Nevay,
S. T. Boogert,
P. Karataev,
K. Kruchinin,
L. Corner,
D. F. Howell,
R. Walczak,
A. Aryshev,
J. Urakawa,
N. Terunuma
Abstract:
A laserwire transverse electron beam size measurement system has been developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK. Special electron beam optics were developed to create an approximately 1 x 100 μm (vertical x horizontal) electron beam at the laserwire location, which was profiled using a 150 mJ, 71 ps laser pulse with a wavelength of 532 nm. The precise characterisation…
▽ More
A laserwire transverse electron beam size measurement system has been developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK. Special electron beam optics were developed to create an approximately 1 x 100 μm (vertical x horizontal) electron beam at the laserwire location, which was profiled using a 150 mJ, 71 ps laser pulse with a wavelength of 532 nm. The precise characterisation of the laser propagation allows the non-Gaussian transverse profiles of the electron beam caused by the laser divergence to be deconvolved. A minimum vertical electron beam size of 1.07 ${\pm}$ 0.06 (stat.) ${\pm}$ 0.05 (sys.) μm was measured. A vertically focussing quadrupole just before the laserwire was varied whilst making laserwire measurements and the projected vertical emittance was measured to be 82.56 ${\pm}$ 3.04 pm rad.
△ Less
Submitted 29 May, 2014; v1 submitted 1 April, 2014;
originally announced April 2014.
-
Principal Component Analysis of Cavity Beam Position Monitor Signals
Authors:
Y. I. Kim,
S. T. Boogert,
Y. Honda,
A. Lyapin,
H. Park,
N. Terunuma,
T. Tauchi,
J. Urakawa
Abstract:
Model-independent analysis (MIA) methods are generally useful for analysing complex systems in which relationships between the observables are non-trivial and noise is present. Principle Component Analysis (PCA) is one of MIA methods allowing to isolate components in the input data graded to their contribution to the variability of the data. In this publication we show how the PCA can be applied t…
▽ More
Model-independent analysis (MIA) methods are generally useful for analysing complex systems in which relationships between the observables are non-trivial and noise is present. Principle Component Analysis (PCA) is one of MIA methods allowing to isolate components in the input data graded to their contribution to the variability of the data. In this publication we show how the PCA can be applied to digitised signals obtained from a cavity beam position monitor (CBPM) system on the example of a 3-cavity test system installed at the Accelerator Test Facility 2 (ATF2) at KEK in Japan. We demonstrate that the PCA based method can be used to extract beam position information, and matches conventional techniques in terms of performance, while requiring considerably less settings and data for calibration.
△ Less
Submitted 3 March, 2014; v1 submitted 18 November, 2013;
originally announced November 2013.
-
Observation of the Stimulated Coherent Diffraction Radiation in an Open Resonator at LUCX Facility
Authors:
A. Aryshev,
S. Araki,
M. Fukuda,
N. Terunuma,
J. Urakawa,
P. Karataev,
G. Naumenko,
A. Potylitsyn,
L. Sukhikh,
D. Verigin,
K. Sakaue
Abstract:
We present an initial test of a new type of a pre-bunched beam pumped free electron maser based on Stimulated Coherent Diffraction Radiation (SCDR) generated in an open resonator. An ultra-fast Schottky Barrier Diode (time response $<1\,$ns) has enabled to investigate the properties of the radiation stored in the cavity as well as the intrinsic properties of the cavity itself. We observed a turn-b…
▽ More
We present an initial test of a new type of a pre-bunched beam pumped free electron maser based on Stimulated Coherent Diffraction Radiation (SCDR) generated in an open resonator. An ultra-fast Schottky Barrier Diode (time response $<1\,$ns) has enabled to investigate the properties of the radiation stored in the cavity as well as the intrinsic properties of the cavity itself. We observed a turn-by-turn SCDR generated by a multibunch beam. When the cavity length was exactly a half of the bunch spacing a clear resonance was observed. Moreover, turn-by-turn measurements revealed the cavity quality factor of $72.88$, which was rather high for an open resonator in the wavelength range of $3-5\,$mm. An exponential growth of the photon intensity as a function of the number of bunches was also demonstrated.
△ Less
Submitted 29 October, 2013;
originally announced October 2013.
-
Cavity beam position monitor system for the Accelerator Test Facility 2
Authors:
Y. I. Kim,
R. Ainsworth,
A. Aryshev,
S. T. Boogert,
G. Boorman,
J. Frisch,
A. Heo,
Y. Honda,
W. H. Hwang,
J. Y. Huang,
E. -S. Kim,
S. H. Kim,
A. Lyapin,
T. Naito,
J. May,
D. McCormick,
R. E. Mellor,
S. Molloy,
J. Nelson,
S. J. Park,
Y. J. Park,
M. Ross,
S. Shin,
C. Swinson,
T. Smith
, et al. (4 additional authors not shown)
Abstract:
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electro…
▽ More
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electronics, and digital processing are described. The resolution of the C-band system with attenuators was determined to be approximately 250 nm and 1 m for the S-band system. Without attenuation the best recorded C-band cavity resolution was 27 nm.
△ Less
Submitted 23 January, 2013;
originally announced January 2013.
-
High Resolution BPM Upgrade for the ATF Dam** Ring at KEK
Authors:
N. Eddy,
C. Briegel,
B. Fellenz,
E. Gianfelice-Wendt,
P. Prieto,
R. Rechenmacher,
A. Semenov,
D. Voy,
M. Wendt,
D. Zhang,
N. Terunuma,
J. Urakawa
Abstract:
A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The techni…
▽ More
A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The technical concept and realization as well as results of beam studies are presented.
△ Less
Submitted 20 September, 2012;
originally announced September 2012.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Effect of Compton Scattering on the Electron Beam Dynamics at the ATF Dam** Ring
Authors:
I. Chaikovska,
C. Bruni,
N. Delerue,
A. Variola,
F. Zomer,
K. Kubo,
T. Naito,
T. Omori,
N. Terunuma,
J. Urakawa
Abstract:
Compton scattering provides one of the most promising scheme to obtain polarized positrons for the next generation of $e^-$ -- $e^+$ colliders. Moreover it is an attractive method to produce monochromatic high energy polarized gammas for nuclear applications and X-rays for compact light sources. In this framework a four-mirror Fabry-Pérot cavity has been installed at the Accelerator Test Facility…
▽ More
Compton scattering provides one of the most promising scheme to obtain polarized positrons for the next generation of $e^-$ -- $e^+$ colliders. Moreover it is an attractive method to produce monochromatic high energy polarized gammas for nuclear applications and X-rays for compact light sources. In this framework a four-mirror Fabry-Pérot cavity has been installed at the Accelerator Test Facility (ATF - KEK, Tsukuba, Japan) and is used to produce an intense flux of polarized gamma rays by Compton scattering \cite{ipac-mightylaser}. For electrons at the ATF energy (1.28 GeV) Compton scattering may result in a shorter lifetime due to the limited bucket acceptance. We have implemented the effect of Compton scattering on a 2D tracking code with a Monte-Carlo method. This code has been used to study the longitudinal dynamics of the electron beam at the ATF dam** ring, in particular the evolution of the energy spread and the bunch length under Compton scattering. The results obtained are presented and discussed. Possible methods to observe the effect of Compton scattering on the ATF beam are proposed.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
Shintake Monitor in ATF2 : Present Status
Authors:
Takashi Yamanaka,
Masahiro Oroku,
Yohei Yamaguchi,
Yoshio Kamiya,
Taikan Suehara,
Sachio Komamiya,
Toshiyuki Okugi,
Nobuhiro Terunuma,
Toshiaki Tauchi,
Sakae Araki,
Junji Urakawa
Abstract:
A beam size monitor so called Shintake monitor, which uses the inverse Compton scattering between the laser interference fringe and the electron beam was designed for and installed at ATF2. The commissioning at ATF2 was started in the end of 2008 and succeeded in the measurement of the fringe pattern from the scattered gamma-rays. The present status of the Shintake monitor is described here.
A beam size monitor so called Shintake monitor, which uses the inverse Compton scattering between the laser interference fringe and the electron beam was designed for and installed at ATF2. The commissioning at ATF2 was started in the end of 2008 and succeeded in the measurement of the fringe pattern from the scattered gamma-rays. The present status of the Shintake monitor is described here.
△ Less
Submitted 18 June, 2010;
originally announced June 2010.
-
Shintake Monitor in ATF2: Performance Evaluation
Authors:
Y. Yamaguchi,
T. Yamanaka,
M. Oroku,
Y. Kamiya,
S. Komamiya,
T. Suehara,
T. Okugi,
N. Terunuma,
T. Tauchi,
S. Araki,
J. Urakawa
Abstract:
The beam test for the Shintake monitor succeeded in measuring signal modulation with the laser interference fringe pattern in November 2009. We have studied the error sources, and evaluated the systematic error to be less than 30% for 1 minute measurements. This paper centers on the evaluation of the Shintake monitor performance through analyzing beam tests deta. Most systematic error sources are…
▽ More
The beam test for the Shintake monitor succeeded in measuring signal modulation with the laser interference fringe pattern in November 2009. We have studied the error sources, and evaluated the systematic error to be less than 30% for 1 minute measurements. This paper centers on the evaluation of the Shintake monitor performance through analyzing beam tests deta. Most systematic error sources are well understood, enabling accurate measurement of the beam size when it reaches 37 nm.
△ Less
Submitted 17 June, 2010; v1 submitted 17 June, 2010;
originally announced June 2010.
-
Photon generation by laser-Compton scattering at the KEK-ATF
Authors:
Shuhei Miyoshi,
Tomoya Akagi,
Sakae Araki,
Yoshisato Funahashi,
Tachishige Hirose,
Yosuke Honda,
Masao Kuriki,
Xiao Li,
Toshiyuki Okugi,
Tsunehiko Omori,
Guoxi Pei,
Kazuyuki Sakaue,
Hirotaka Shimizu,
Tohru Takahashi,
Nobuhiro Terunuma,
Junji Urakawa,
Yasuaki Ushio,
Masakazu Washio
Abstract:
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colli…
▽ More
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colliding them with the 1.3 GeV electron beam in the ATF ring while maintaining the laser pulse accumulation in the cavity. As a result, we observed 26.0 +/- 0.1 photons per electron-laser pulse crossing, which corresponds to a yield of 10^8 photons in a second.
△ Less
Submitted 18 February, 2010;
originally announced February 2010.
-
Status of the ATF extraction line laser-wire
Authors:
Nicolas Delerue,
Fred Gannaway,
David Howell,
Grahame Blair,
Gary Boorman,
Chafik Driouichi,
Stewart Boogert,
Alexander Aryshev,
Pavel Karataev,
Nobuhiro Terunuma,
Junji Urakawa,
Axel Brachmann,
Joe Frisch,
Marc Ross
Abstract:
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
-
Design of a Polarised Positron Source Based on Laser Compton Scattering
Authors:
S. Araki,
Y. Higashi,
Y. Honda,
Y. Kurihara,
M. Kuriki,
T. Okugi,
T. Omori,
T. Taniguchi,
N. Terunuma,
J. Urakawa,
X. Artru,
M. Chevallier,
V. Strakhovenko,
E. Bulyak,
P. Gladkikh,
K. Moenig,
R. Chehab,
A. Variola,
F. Zomer,
S. Guiducci,
P. Raimondi,
F. Zimmermann,
K. Sakaue,
T. Hirose,
M. Washio
, et al. (10 additional authors not shown)
Abstract:
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
△ Less
Submitted 15 September, 2005; v1 submitted 2 September, 2005;
originally announced September 2005.
-
Double Kicker system in ATF
Authors:
T. Imai,
K. Nakai,
H. Hayano,
J. Urakawa,
N. Terunuma
Abstract:
A double kicker system which extracts the ultra-low emittance multi-bunch beam stably from ATF dam** ring was developed. The performance of the system was studied comparing an orbit jitter with single kicker extraction in single bunch mode. The position jitter reduction was estimated from the analysis of the extraction orbits. The reduction was confirmed for the double kicker system within a r…
▽ More
A double kicker system which extracts the ultra-low emittance multi-bunch beam stably from ATF dam** ring was developed. The performance of the system was studied comparing an orbit jitter with single kicker extraction in single bunch mode. The position jitter reduction was estimated from the analysis of the extraction orbits. The reduction was confirmed for the double kicker system within a resolution of BPMs. More precise tuning of the system with a wire scanner has been tried by changing a beta function at the second kicker to get more reduction of kick angle jitter. The results of these studies are described in detail.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.