-
Global Characterization of a Laser-Generated Neutron Source
Authors:
D. P. Higginson,
R. Lelièvre,
L. Vassura,
M. M. Gugiu,
M. Borghesi,
L. A. Bernstein,
D. L. Bleuel,
B. L. Goldblum,
A. Green,
F. Hannachi,
S. Kar,
S. Kisyov,
L. Quentin,
M. Schroer,
M. Tarisien,
O. Willi,
P. Antici,
F. Negoita,
A. Allaoua,
J. Fuchs
Abstract:
Laser-driven neutron sources are routinely produced by the interaction of laser-accelerated protons with a converter. They present complementary characteristics to those of conventional accelerator-based neutron sources (e.g. short pulse durations, enabling novel applications like radiography). We present here results from an experiment aimed at performing a global characterization of the neutrons…
▽ More
Laser-driven neutron sources are routinely produced by the interaction of laser-accelerated protons with a converter. They present complementary characteristics to those of conventional accelerator-based neutron sources (e.g. short pulse durations, enabling novel applications like radiography). We present here results from an experiment aimed at performing a global characterization of the neutrons produced using the Titan laser at the Jupiter Laser Facility (Livermore, USA), where protons were accelerated from 23 $μm$ thick plastic targets and directed onto a LiF converter to produce neutrons. For this purpose, several diagnostics were used to measure these neutron emissions, such as CR-39, activation foils, Time-of-Flight detectors and direct measurement of $^{7}$Be residual activity in the LiF converters. The use of these different, independently operating diagnostics enables comparison of the various measurements performed to provide a robust characterization. These measurements led to a neutron yield of $2.10^{9}$ neutrons per shot with a modest angular dependence, close to that simulated.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Laser-driven ion and electron acceleration from near-critical density gas targets: towards high-repetition rate operation in the 1 PW, sub-100 fs laser interaction regime
Authors:
V. Ospina-Bohórquez,
C. Salgado-López,
M. Ehret,
S. Malko,
M. Salvadori,
T. Pisarczyk,
T. Chodukowski,
Z. Rusiniak,
M. Krupka,
P. GuillonM. Lendrin,
G. Pérez-Callejo,
C. Vlachos,
F. Hannachi,
M. Tarisien,
F. Consoli,
C. Verona,
G. Prestopino,
J. Dostal,
R. Dudzak,
J. L. Henares,
J. I. Apiñaniz,
D. DeLuis,
A. Debayle,
J. Caron,
T. Ceccotti
, et al. (12 additional authors not shown)
Abstract:
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser…
▽ More
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser pulses with near-critical ($\sim 10^{20}\,\rm cm^{-3}$) helium gas jets, a debris-free targetry compatible with high ($\sim 1\,\rm Hz$) repetition rate operation. We provide evidence of $α$ particles being forward accelerated up to $\sim 2.7\,\rm MeV$ energy with a total flux of $\sim 10^{11}\,\rm sr^{-1}$ as integrated over $>0.1 \,\rm MeV$ energies and detected within a $0.5\,\rm mrad$ solid angle. We also report on on-axis emission of relativistic electrons with an exponentially decaying spectrum characterized by a $\sim 10\,\rm MeV$ slope, i.e., five times larger than the standard ponderomotive scaling. The total charge of these electrons with energy above 2 MeV is estimated to be of $\sim 1 \,\rm nC$, corresponding to $\sim 0.1\,\%$ of the laser drive energy. In addition, we observe the formation of a plasma channel, extending longitudinally across the gas density maximum and expanding radially with time. These results are well captured by large-scale particle-in-cell simulations, which reveal that the detected fast ions most likely originate from reflection off the rapidly expanding channel walls. The latter process is predicted to yield ion energies in the MeV range, which compare well with the measurements. Finally, direct laser acceleration is shown to be the dominant mechanism behind the observed electron energization.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Collisionless Shock Acceleration of protons in a plasma slab produced in a gas jet by the collision of two laser-driven hydrodynamic shockwaves
Authors:
J. -R. Marquès,
L. Lancia,
P. Loiseau,
P. Forestier-Colleoni,
M. Tarisien,
E. Atukpor,
V. Bagnoud,
C. Brabetz,
F. Consoli,
J. Domange,
F. Hannachi,
P. Nicolaï,
M. Salvadori,
B. Zielbauer
Abstract:
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by ta…
▽ More
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by tailoring only the entrance side of the ps-laser, or both sides of the gas jet. Without tailoring the acceleration is transverse to the laser axis, with a low-energy exponential spectrum, produced by Coulomb explosion. When the front side of the gas jet is tailored, a forward acceleration appears, that is significantly enhanced when both the front and back sides of the plasma are tailored. This forward acceleration produces higher energy protons, with a peaked spectrum, and is in good agreement with the mechanism of Collisionless Shock Acceleration (CSA). The spatio-temporal evolution of the plasma profile was characterized by optical shadowgraphy of a probe beam. The refraction and absorption of this beam was simulated by post-processing 3D hydrodynamic simulations of the plasma tailoring. Comparison with the experimental results allowed to estimate the thickness and near-critical density of the plasma slab produced by tailoring both sides of the gas jet. These parameters are in good agreement with those required for CSA.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Laser Driven Nuclear physics at ELINP
Authors:
F. Negoita,
M. Roth,
P. G. Thirolf,
S. Tudisco,
F. Hannachi,
S. Moustaizis,
I. Pomerantz,
P. Mckenna,
J. Fuchs,
K. Sphor,
G. Acbas,
A. Anzalone,
P. Audebert,
S. Balascuta,
F. Cappuzzello,
M. O. Cernaianu,
S. Chen,
I. Dancus,
R. Freeman,
H. Geissel,
P. Ghenuche,
L. Gizzi,
F. Gobet,
G. Gosselin,
M. Gugiu
, et al. (31 additional authors not shown)
Abstract:
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
△ Less
Submitted 4 January, 2022;
originally announced January 2022.
-
Over-critical sharp-gradient plasma slab produced by the collision of laser-induced blast-waves in a gas jet; Application to high-energy proton acceleration
Authors:
J. -R. Marquès,
P. Loiseau,
J. Bonvalet,
M. Tarisien,
E. d'Humières,
J. Domange,
F. Hannachi,
L. Lancia,
O. Larroche,
P. Nicolaï P. Puyuelo-Valdes,
L. Romagnani,
J. Santos,
V. Tikhonchuk
Abstract:
The generation of thin and high density plasma slabs at high repetition rate is a key issue for ultra-high intensity laser applications. We present a scheme to create such plasma slabs, based on the propagation and collision in a gas jet of two counter-propagating blast waves (BW). Each BW is launched by a sudden and local heating induced by a nanosecond laser beam that propagates along the side o…
▽ More
The generation of thin and high density plasma slabs at high repetition rate is a key issue for ultra-high intensity laser applications. We present a scheme to create such plasma slabs, based on the propagation and collision in a gas jet of two counter-propagating blast waves (BW). Each BW is launched by a sudden and local heating induced by a nanosecond laser beam that propagates along the side of the jet. The resulting cylindrical BW expands perpendicular to the beam. The shock front, bent by the gas jet density gradient, pushes and compresses the plasma toward the jet center. By using two parallel ns laser beams, this scheme enables to tailor independently two opposite sides of the jet, while avoiding the damage risks associated with counterpropagating laser beams. A parametric study is performed using two and three dimensional hydrodynamic, as well as kinetic simulations. The BWs bending combined with the collision in a stagnation regime increases the density by more than 10 times and generates a very thin (down to few microns), near to over-critical plasma slab with a high density contrast (> 100), and a lifetime of a few hundred picoseconds. Two dimensional particle-in-cell simulations are used to study the influence of plasma tailoring on proton acceleration by a high-intensity sub-picosecond laser pulse. Tailoring the plasma not only at the entrance but also the exit side of the ps-pulse enhances the proton beam collimation, increases significantly the number of high energy protons, as well as their maximum energy.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.