Showing 1–24 of 24 results for author: Tao, R

Characterization of Recirculating Waveguide Meshes Based on an Optimization Method with a Parameter Space Reduction Technology

Authors: Ran Tao, Jifang Qiu, Yuchen Chen, Bowen Zhang, Yan Li, Hongxiang Guo, Jian Wu

Abstract: Fabrication imperfections must be considered during configuration to ensure that the setup is suitable for the actual fabricated programmable photonic integrated circuits (PPICs). Therefore, characterization of imperfections is crucial but difficult, especially for PPICs made from recirculating waveguide meshes. The flexibility required by these meshes demands a more complex topology and compact T… ▽ More Fabrication imperfections must be considered during configuration to ensure that the setup is suitable for the actual fabricated programmable photonic integrated circuits (PPICs). Therefore, characterization of imperfections is crucial but difficult, especially for PPICs made from recirculating waveguide meshes. The flexibility required by these meshes demands a more complex topology and compact TBU structure, complicating the characterization. In this paper, we propose a characterization method applicable to recirculating waveguide meshes based on an optimization approach, along with a step-by-step procedure to reduce the parameter space of optimization, allowing for characterizing imperfect parameters of each individual component within the waveguide mesh. To the best of our knowledge, this method can greatly broaden the range of characterized parameters compared to currently reported methods. In order to verify the effectiveness of our method, we used the characterized parameters to build a multi-frequency model of a mesh with fabrication errors and successfully demonstrated accurate prediction of its behavior. Furthermore, we applied our method on implementations of 6 different kind of FIR/IRR filters, to further prove the effectiveness of our method in configuring applications on meshes with fabrication errors. At last, our method was carried out under various scenarios considering beam splitter splitting ratio variance, inaccurate measurements of mesh and imprecise TBU insertion loss characterization, to demonstrate its strong robustness under various practical scenarios. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Parts-per-billion Trace Element Detection in Anhydrous Minerals by Micro-scale Quantitative NMR

Authors: Yunhua Fu, Renbiao Tao, Lifei Zhang, Shijie Li, Ya-Nan Yang, Dehan Shen, Zilong Wang, Thomas Meier

Abstract: Nominally anhydrous minerals (NAMs) composing Earth's and planetary rocks incorporate microscopic amounts of volatiles. However, volatile distribution in NAMs and their effect on physical properties of rocks remain controversial. Thus, constraining trace volatile concentrations in NAMs is tantamount to our understanding of the evolution of rocky planets and planetesimals. Here, we present a novel… ▽ More Nominally anhydrous minerals (NAMs) composing Earth's and planetary rocks incorporate microscopic amounts of volatiles. However, volatile distribution in NAMs and their effect on physical properties of rocks remain controversial. Thus, constraining trace volatile concentrations in NAMs is tantamount to our understanding of the evolution of rocky planets and planetesimals. Here, we present a novel approach of trace-element quantification using micro-scale Nuclear Magnetic Resonance (NMR) spectroscopy. This approach employs the principle of enhanced mass-sensitivity in NMR microcoils formerly used in \textit{in-situ} high pressure experiments. We were able to demonstrate that this method is in excellent agreement with standard methods across their respective detection capabilities. We show that by simultaneous detection of internal reference nuclei, the quantification sensitivity can be substantially increased, leading to quantifiable trace volatile element amounts of about $50$ wt-ppb measured in a micro-meter sized single anorthitic mineral grain, greatly enhancing detection capabilities of volatiles in geologically important systems. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Dynamical Reversibility and A New Theory of Causal Emergence

Authors: Jiang Zhang, Ruyi Tao, Keng Hou Leong, Mingzhe Yang, Bing Yuan

Abstract: The theory of causal emergence based on effective information(EI) suggests that complex systems may exhibit a phenomenon called causal emergence(CE), where the macro-dynamics demonstrate a stronger causal effect than the micro-dynamics. However, a challenge in this theory is the dependence on the method used to coarse-grain the system. In this paper, we introduce a fresh concept of approximate dyn… ▽ More The theory of causal emergence based on effective information(EI) suggests that complex systems may exhibit a phenomenon called causal emergence(CE), where the macro-dynamics demonstrate a stronger causal effect than the micro-dynamics. However, a challenge in this theory is the dependence on the method used to coarse-grain the system. In this paper, we introduce a fresh concept of approximate dynamical reversibility and establish a novel framework for CE based on this and singular value decomposition. Our research not only reveals a strong correlation between the proximity of a Markov chain being dynamically reversible and EI in assessing causal effects across various scenarios but also demonstrates that EI is constrained by the logarithm of the approximate dynamical reversibility. Leveraging this concept, we present an innovative approach to quantifying CE that is agnostic to specific coarse-graining techniques and effectively captures the inherent characteristics of Markov dynamics. Through empirical evaluations on examples of boolean networks, cellular automata, and complex networks, we validate our refined CE definition. △ Less

Submitted 9 June, 2024; v1 submitted 22 February, 2024; originally announced February 2024.

Comments: 40 pages,9 figures

Continuous operation of large-scale atom arrays in optical lattices

Authors: Flavien Gyger, Maximilian Ammenwerth, Renhao Tao, Hendrik Timme, Stepan Snigirev, Immanuel Bloch, Johannes Zeiher

Abstract: Scaling the size of assembled neutral-atom arrays trapped in optical lattices or optical tweezers is an enabling step for a number of applications ranging from quantum simulations to quantum metrology. However, preparation times increase with system size and constitute a severe bottleneck in the bottom-up assembly of large ordered arrays from stochastically loaded optical traps. Here, we demonstra… ▽ More Scaling the size of assembled neutral-atom arrays trapped in optical lattices or optical tweezers is an enabling step for a number of applications ranging from quantum simulations to quantum metrology. However, preparation times increase with system size and constitute a severe bottleneck in the bottom-up assembly of large ordered arrays from stochastically loaded optical traps. Here, we demonstrate a novel method to circumvent this bottleneck by recycling atoms from one experimental run to the next, while continuously reloading and adding atoms to the array. Using this approach, we achieve densely-packed arrays with more than 1000 atoms stored in an optical lattice, continuously refilled with a net 2.5 seconds cycle time and about 130 atoms reloaded during each cycle. Furthermore, we show that we can continuously maintain such large arrays by simply reloading atoms that are lost from one cycle to the next. Our approach paves the way towards quantum science with large ordered atomic arrays containing thousands of atoms in continuous operation. △ Less

Submitted 10 February, 2024; v1 submitted 7 February, 2024; originally announced February 2024.

Comments: 9 pages, 6 figures

Single-shot Phase Retrieval from a Fractional Fourier Transform Perspective

Authors: Yixiao Yang, Ran Tao, Kaixuan Wei, Jun Shi

Abstract: The realm of classical phase retrieval concerns itself with the arduous task of recovering a signal from its Fourier magnitude measurements, which are fraught with inherent ambiguities. A single-exposure intensity measurement is commonly deemed insufficient for the reconstruction of the primal signal, given that the absent phase component is imperative for the inverse transformation. In this work,… ▽ More The realm of classical phase retrieval concerns itself with the arduous task of recovering a signal from its Fourier magnitude measurements, which are fraught with inherent ambiguities. A single-exposure intensity measurement is commonly deemed insufficient for the reconstruction of the primal signal, given that the absent phase component is imperative for the inverse transformation. In this work, we present a novel single-shot phase retrieval paradigm from a fractional Fourier transform (FrFT) perspective, which involves integrating the FrFT-based physical measurement model within a self-supervised reconstruction scheme. Specifically, the proposed FrFT-based measurement model addresses the aliasing artifacts problem in the numerical calculation of Fresnel diffraction, featuring adaptability to both short-distance and long-distance propagation scenarios. Moreover, the intensity measurement in the FrFT domain proves highly effective in alleviating the ambiguities of phase retrieval and relaxing the previous conditions on oversampled or multiple measurements in the Fourier domain. Furthermore, the proposed self-supervised reconstruction approach harnesses the fast discrete algorithm of FrFT alongside untrained neural network priors, thereby attaining preeminent results. Through numerical simulations, we demonstrate that both amplitude and phase objects can be effectively retrieved from a single-shot intensity measurement using the proposed approach and provide a promising technique for support-free coherent diffraction imaging. △ Less

Submitted 17 November, 2023; originally announced November 2023.

High-fidelity detection of large-scale atom arrays in an optical lattice

Authors: Renhao Tao, Maximilian Ammenwerth, Flavien Gyger, Immanuel Bloch, Johannes Zeiher

Abstract: Recent advances in quantum simulation based on neutral atoms have largely benefited from high-resolution, single-atom sensitive imaging techniques. A variety of approaches have been developed to achieve such local detection of atoms in optical lattices or optical tweezers. For alkaline-earth and alkaline-earth-like atoms, the presence of narrow optical transitions opens up the possibility of perfo… ▽ More Recent advances in quantum simulation based on neutral atoms have largely benefited from high-resolution, single-atom sensitive imaging techniques. A variety of approaches have been developed to achieve such local detection of atoms in optical lattices or optical tweezers. For alkaline-earth and alkaline-earth-like atoms, the presence of narrow optical transitions opens up the possibility of performing novel types of Sisyphus cooling, where the cooling mechanism originates from the capability to spatially resolve the differential optical level shifts in the trap potential. Up to now, it has been an open question whether high-fidelity imaging could be achieved in a "repulsive Sisyphus" configuration, where the trap depth of the ground state exceeds that of the excited state involved in cooling. Here, we demonstrate high-fidelity ($99.971(1)\%$) and high-survival ($99.80(5)\%$) imaging of strontium atoms using repulsive Sisyphus cooling. We use an optical lattice as a pinning potential for atoms in a large-scale tweezer array with up to $399$ tweezers and show repeated, high-fidelity lattice-tweezer-lattice transfers. We furthermore demonstrate loading the lattice with approximately 10000 atoms directly from the MOT and scalable imaging over $>10000$ lattice sites with a combined survival probability and classification fidelity better than $99.2\%$. Our lattice thus serves as a locally addressable and sortable reservoir for continuous refilling of optical tweezer arrays in the future. △ Less

Submitted 26 April, 2024; v1 submitted 9 September, 2023; originally announced September 2023.

Targeted Multispectral Filter Array Design for Endoscopic Cancer Detection in the Gastrointestinal Tract

Authors: Michaela Taylor-Williams, Ran Tao, Travis W Sawyer, Dale J Waterhouse, Jonghee Yoon, Sarah E Bohndiek

Abstract: Colour differences between healthy and diseased tissue in the gastrointestinal tract are detected visually by clinicians during white light endoscopy (WLE); however, the earliest signs of disease are often just a slightly different shade of pink compared to healthy tissue. Here, we propose to target alternative colours for imaging to improve contrast using custom multispectral filter arrays (MSFAs… ▽ More Colour differences between healthy and diseased tissue in the gastrointestinal tract are detected visually by clinicians during white light endoscopy (WLE); however, the earliest signs of disease are often just a slightly different shade of pink compared to healthy tissue. Here, we propose to target alternative colours for imaging to improve contrast using custom multispectral filter arrays (MSFAs) that could be deployed in an endoscopic chip-on-tip configuration. Using an open-source toolbox, Opti-MSFA, we examined the optimal design of MSFAs for early cancer detection in the gastrointestinal tract. The toolbox was first extended to use additional classification models (k-Nearest Neighbour, Support Vector Machine, and Spectral Angle Mapper). Using input spectral data from published clinical trials examining the oesophagus and colon, we optimised the design of MSFAs with 3 to 9 different bands. We examined the variation of the spectral and spatial classification accuracy as a function of number of bands. The MSFA designs have high classification accuracies, suggesting that future implementation in endoscopy hardware could potentially enable improved early detection of disease in the gastrointestinal tract during routine screening and surveillance. Optimal MSFA configurations can achieve similar classification accuracies as the full spectral data in an implementation that could be realised in far simpler hardware. The reduced number of spectral bands could enable future deployment of multispectral imaging in an endoscopic chip-on-tip configuration. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Comments: 29 pages

Molecular-Scale Visualization of Steric Effects of Ligand Binding to Reconstructed Au(111) Surfaces

Authors: Liya Bi, Sasawat Jamnuch, Amanda Chen, Alexandria Do, Krista P. Balto, Zhe Wang, Qingyi Zhu, Yufei Wang, Yanning Zhang, Andrea R. Tao, Tod A. Pascal, Joshua S. Figueroa, Shaowei Li

Abstract: Direct imaging of single molecules at nanostructured interfaces is a grand challenge, with potential to enable new, precise material architectures and technologies. Of particular interest are the structural morphology and spectroscopic signatures of the adsorbed molecule, where modern probes are only now being developed with the necessary spatial and energetic resolution to provide detailed inform… ▽ More Direct imaging of single molecules at nanostructured interfaces is a grand challenge, with potential to enable new, precise material architectures and technologies. Of particular interest are the structural morphology and spectroscopic signatures of the adsorbed molecule, where modern probes are only now being developed with the necessary spatial and energetic resolution to provide detailed information at molecule-surface interface. Here, we directly visualize the binding of individual m-terphenyl isocyanide ligands to a reconstructed Au(111) surface through scanning tunneling microscopy (STM) and inelastic electron tunneling spectroscopy (IETS). The site-dependent steric pressure of the various surface features alters the vibrational fingerprints of the m-terphenyl isocyanides, which is characterized with single-molecule precision through joint experimental and theoretical approaches. This study for the first time provides molecular-level insights into the steric-pressure-enabled surface binding selectivity, as well as its effect on the chemical properties of individual surface-binding ligands. △ Less

Submitted 28 November, 2023; v1 submitted 27 June, 2023; originally announced June 2023.

Resource-efficient Direct Characterization of General Density Matrix

Authors: Liang Xu, Mingti Zhou, Runxia Tao, Zhipeng Zhong, Ben Wang, Zhiyong Cao, Hongkuan Xia, Qianyi Wang, Hao Zhan, Aonan Zhang, Shang Yu, Nanyang Xu, Ying Dong, Changliang Ren, Lijian Zhang

Abstract: Sequential weak measurements allow the direct extraction of individual density-matrix elements instead of globally reconstructing the whole density matrix, opening a new avenue for the characterization of quantum systems. Nevertheless, the requirement of multiple coupling for each qudit of quantum systems and the lack of appropriate precision evaluation constraint its applicability extension, espe… ▽ More Sequential weak measurements allow the direct extraction of individual density-matrix elements instead of globally reconstructing the whole density matrix, opening a new avenue for the characterization of quantum systems. Nevertheless, the requirement of multiple coupling for each qudit of quantum systems and the lack of appropriate precision evaluation constraint its applicability extension, especially for multi-qudit quantum systems. Here, we propose a resource-efficient scheme (RES) to directly characterize the density matrix of general multi-qudit systems, which not only optimizes the measurements but also establishes a feasible estimation analysis. In this scheme, an efficient observable of quantum system is constructed such that a single meter state coupled to each qudit is sufficient to extract the corresponding density-matrix element. An appropriate model based on the statistical distribution of errors are used to evaluate the precision and feasibility of the scheme. We experimentally apply the RES to the direct characterization of general single-photon qutrit states and two-photon entangled states. The results show that the RES outperforms the sequential schemes in terms of efficiency and precision in both weak- and strong- coupling scenarios. This work sheds new light on the practical characterization of large-scale quantum systems and investigation of their non-classical properties. △ Less

Submitted 13 March, 2023; originally announced March 2023.

Comments: 6 pages, 4 figures

Scaling laws and a general theory for the growth of public companies

Authors: Jiang Zhang, Christopher P. Kempes, Marcus J. Hamilton, Ruyi Tao, Geoffrey B. West

Abstract: Publicly traded companies are fundamental units of contemporary economies and markets and are important mechanisms through which humans interact with their environments. Understanding the general properties that underlie the processes of their growth has long been of interest, yet fundamental debates about the effects of firm size on growth have persisted. Here we develop a scaling framework that… ▽ More Publicly traded companies are fundamental units of contemporary economies and markets and are important mechanisms through which humans interact with their environments. Understanding the general properties that underlie the processes of their growth has long been of interest, yet fundamental debates about the effects of firm size on growth have persisted. Here we develop a scaling framework that focuses on company size as the critical feature determining a variety of tradeoffs, and use this to reveal novel systematic behavior across the diversity of publicly-traded companies. Using a large database of 31,553 US companies over nearly 70 years, and 3,160 Chinese companies over 24 year, we show how the dynamics of companies expressed as scaling relationships leads to a quantitative, analytic theory for their growth. This theory produces several predictions that are in good agreement with data for both the US and China, whose markets have strikingly different histories and underlying structures. In both cases sales scale sublinearly with assets and exhibit nearly identical exponents leading, surprisingly and nontrivially, to assets that grow as a power law in time rather than exponentially, as often assumed. On the other hand, liabilities scale linearly in the US (exponent of $1.0$) but superlinearly in China (exponent of $1.09$). We show that such small differences in scaling exponents can have a significant impact on the character and long-term evolution of growth trajectories. These results illustrate that while companies are part of a larger class of growth phenomena driven by incomes and costs that scale with size, they are unique in that they grow following a temporal power-function which sets them apart from organisms, cities, nations, and markets, whose growth over time is often exponential. △ Less

Submitted 6 July, 2022; v1 submitted 21 September, 2021; originally announced September 2021.

Comments: 17 pages, 6 figures, 1 table; revised version

Collisions of ultracold molecules in bright and dark optical dipole traps

Authors: Roman Bause, Andreas Schindewolf, Renhao Tao, Marcel Duda, Xing-Yan Chen, Goulven Quéméner, Tijs Karman, Arthur Christianen, Immanuel Bloch, Xin-Yu Luo

Abstract: Understanding collisions between ultracold molecules is crucial for making stable molecular quantum gases and harnessing their rich internal degrees of freedom for quantum engineering. Transient complexes can strongly influence collisional physics, but in the ultracold regime, key aspects of their behavior have remained unknown. To explain experimentally observed loss of ground-state molecules fro… ▽ More Understanding collisions between ultracold molecules is crucial for making stable molecular quantum gases and harnessing their rich internal degrees of freedom for quantum engineering. Transient complexes can strongly influence collisional physics, but in the ultracold regime, key aspects of their behavior have remained unknown. To explain experimentally observed loss of ground-state molecules from optical dipole traps, it was recently proposed that molecular complexes can be lost due to photo-excitation. By trap** molecules in a repulsive box potential using laser light near a narrow molecular transition, we are able to test this hypothesis with light intensities three orders of magnitude lower than what is typical in red-detuned dipole traps. This allows us to investigate light-induced collisional loss in a gas of nonreactive fermionic $^{23}$Na$^{40}$K molecules. Even for the lowest intensities available in our experiment, our results are consistent with universal loss, meaning unit loss probability inside the short-range interaction potential. Our findings disagree by at least two orders of magnitude with latest theoretical predictions, showing that crucial aspects of molecular collisions are not yet understood, and provide a benchmark for the development of new theories. △ Less

Submitted 24 June, 2021; v1 submitted 1 March, 2021; originally announced March 2021.

Comments: 13 pages, 11 figures

Journal ref: Phys. Rev. Research 3, 033013 (2021)

Generation mode-locked square-wave pulse based on reverse saturable absorption effect in graded index multimode fiber

Authors: Zhipeng Dong, Shu jie Li, Jiaqiang Lin, Hongxun Li, Runxia Tao, Chun Gu, Peijun Yao, Lixin Xu

Abstract: We firstly report mode-locked square-wave pulse in Yb-doped fiber laser based on graded index multimode fiber of reverse suturable absorption. By adjusting the pump power, the width of the square-wave can be tuned range from 350 ps to 52.6 ns with 3dB bandwidth spectrum of 0.73 nm. The supermode suppression ratio exceeds ~ 65 dB, which indicates excellent mode-locked operation state, and we also s… ▽ More We firstly report mode-locked square-wave pulse in Yb-doped fiber laser based on graded index multimode fiber of reverse suturable absorption. By adjusting the pump power, the width of the square-wave can be tuned range from 350 ps to 52.6 ns with 3dB bandwidth spectrum of 0.73 nm. The supermode suppression ratio exceeds ~ 65 dB, which indicates excellent mode-locked operation state, and we also study the characteristic of pulse by the chirp measurement system. The mode-locked square-wave pulse fiber laser can sever as high power light source for industrial applications. △ Less

Submitted 14 April, 2019; originally announced April 2019.

Comments: 7 pages, 4 figures

A General Deep Learning Framework for Network Reconstruction and Dynamics Learning

Authors: Zhang Zhang, Yi Zhao, **g Liu, Shuo Wang, Ruyi Tao, Ruyue Xin, Jiang Zhang

Abstract: Many complex processes can be viewed as dynamical systems on networks. However, in real cases, only the performances of the system are known, the network structure and the dynamical rules are not observed. Therefore, recovering latent network structure and dynamics from observed time series data are important tasks because it may help us to open the black box, and even to build up the model of a c… ▽ More Many complex processes can be viewed as dynamical systems on networks. However, in real cases, only the performances of the system are known, the network structure and the dynamical rules are not observed. Therefore, recovering latent network structure and dynamics from observed time series data are important tasks because it may help us to open the black box, and even to build up the model of a complex system automatically. Although this problem hosts a wealth of potential applications in biology, earth science, and epidemics etc., conventional methods have limitations. In this work, we introduce a new framework, Gumbel Graph Network (GGN), which is a model-free, data-driven deep learning framework to accomplish the reconstruction of both network connections and the dynamics on it. Our model consists of two jointly trained parts: a network generator that generating a discrete network with the Gumbel Softmax technique; and a dynamics learner that utilizing the generated network and one-step trajectory value to predict the states in future steps. We exhibit the universality of our framework on different kinds of time-series data: with the same structure, our model can be trained to accurately recover the network structure and predict future states on continuous, discrete, and binary dynamics, and outperforms competing network reconstruction methods. △ Less

Submitted 24 June, 2019; v1 submitted 30 December, 2018; originally announced December 2018.

Comments: v3

An all-fiber laser oscillating directly at single TE01 mode through ring-core fibers

Authors: Yimin Zhang, Hongxun Li, Chuansheng Dai, Runxia Tao, Lixin Xu, Chun Gu, Wei Chen, Yonggang Zhu, Peijun Yao, Qiwen Zhan

Abstract: Cylindrical vector beams (CVBs) have a wide range of applications owing to their particular polarization characteristics and optical field distributions. For the first time, an azimuthally polarized fiber laser without any polarization controller is proposed and demonstrated experimentally. The scheme is based on a self-designed ring-core fiber and transverse mode filter (TMF). The ring-core fiber… ▽ More Cylindrical vector beams (CVBs) have a wide range of applications owing to their particular polarization characteristics and optical field distributions. For the first time, an azimuthally polarized fiber laser without any polarization controller is proposed and demonstrated experimentally. The scheme is based on a self-designed ring-core fiber and transverse mode filter (TMF). The ring-core fiber can break the degeneracy of LP11 modes and make the TE01 mode propagate stably in the fiber laser. The TMF, which made from the ring-core fiber by depositing a layer of Aluminum on the cladding surface, can effectively suppress the modes other than TE01 mode. The fiber laser can stably operate at TE01 mode with a narrow 30dB linewidth of 0.18nm, which indicates the laser is polarization-maintained. This study opens a new avenue toward the true application of CVBs fiber lasers. △ Less

Submitted 10 November, 2018; originally announced November 2018.

Comments: 10 pages, 10 figures

High power orbital-angular-momentum beam generation system based on coherent beam array combination technique

Authors: Dong Zhi, Yanxing Ma, Pu Zhou, Rumao Tao, Xiaolin Wang, Lei Si, Ze** Liu

Abstract: High power orbital-angular-momentum (OAM) beam has dominant advantages in capacity increasing and data receiving for free-space optical communication systems at long distance. Utilizing coherent combination of beam array technique and helical phase approximation by piston-phase-array, we have proposed a generation system of high power novel beam carrying OAM, which could overcome power limitation… ▽ More High power orbital-angular-momentum (OAM) beam has dominant advantages in capacity increasing and data receiving for free-space optical communication systems at long distance. Utilizing coherent combination of beam array technique and helical phase approximation by piston-phase-array, we have proposed a generation system of high power novel beam carrying OAM, which could overcome power limitation of common vortex phase modulator and single beam. We have experimentally implemented a high power OAM beam by coherent beam combination (CBC) of a six-element hexagonal fiber amplifier array. We show that the CBC technique utilized to control the piston phase differences among the array beams has a high accuracy with residual phase errors superior to λ/30. On the premise of CBC, we have obtained novel vortex beams carrying OAM of +/- 1 by applying an additional piston-phase-array modulation on the corresponding beam array. The experimental results approximately coincide with the theoretical analysis. This work could be beneficial to the areas that need high power OAM beams, like ultra-distance free-space optical communications, biomedical treatments, powerful trap** and manipulation under deep potential well. △ Less

Submitted 4 November, 2017; originally announced November 2017.

Comments: 6 pages, 4 figures

Study on the power scaling and mode instability property in an all-fiber narrow-linewidth tapered fiber amplifier

Authors: Long Huang, Zichao Zhou, Chen Shi, Rumao Tao, Xiaolin Wang, Pu Zhou

Abstract: We develop a high-power narrow-linewidth fiber amplifier based on a tapered Yb-doped fiber. In the experiment, the narrow end of the tapered fiber is used as the input port of both pump source and signal light to form a robust all-fiber configuration. The stimulated Brillouin scattering (SBS) is effectively suppressed owing to its gradually increased mode area as well as continuously changed Brill… ▽ More We develop a high-power narrow-linewidth fiber amplifier based on a tapered Yb-doped fiber. In the experiment, the narrow end of the tapered fiber is used as the input port of both pump source and signal light to form a robust all-fiber configuration. The stimulated Brillouin scattering (SBS) is effectively suppressed owing to its gradually increased mode area as well as continuously changed Brillouin frequency shift dependent on the core diameter. As a result, an output power of 260 W without SBS and mode instability (MI) is obtained, with a slope efficiency of 71.3 % and a narrow linewidth of ~2GHz. However, the MI rather than SBS is observed when output power reaches 260 W. The features of MI are experimentally studied in detail. It is pointed out that, the MI seems the primary and durative limitation factor of the tapered fiber amplifier for high-power narrow-linewidth output, although it has advantage to reduce other nonlinear effect. To the best of our knowledge, this is the first detailed experimental study on MI in a tapered fiber. At last, some worthwhile discussion about the optimization of the tapered fiber and the whole system for both SBS and MI suppression is conducted based on the present and previous results. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Influence of seed power on mode instabilities in high power fiber amplifiers

Authors: Rumao Tao, Xiaolin Wang, Pu Zhou, Dong Zhi, Lei Si, Ze** Liu

Abstract: We use a semi-analytical model of stimulated thermal Rayleigh scattering to present theoretical study of seed power on mode instability with the presence of photodarkening. The behavior of mode instabilities as a function of seed power has been investigated. The nonlinear dependence of the threshold with lower seed powers is ascribed to the influence of gain saturation while the reduction behavior… ▽ More We use a semi-analytical model of stimulated thermal Rayleigh scattering to present theoretical study of seed power on mode instability with the presence of photodarkening. The behavior of mode instabilities as a function of seed power has been investigated. The nonlinear dependence of the threshold with lower seed powers is ascribed to the influence of gain saturation while the reduction behavior of the threshold with higher seed powers is put down to the effects of photodarkening, which agrees well with the experimental results. △ Less

Submitted 25 January, 2016; originally announced January 2016.

Comments: 3 pages, 3 figures

Study of dopant concentrations on thermal induced mode instability in high power fiber amplifiers

Authors: Rumao Tao, Pengfei Ma, Xiaolin Wang, Pu Zhou, Ze** Liu

Abstract: Dependence of mode instabilities (MI) on ytterbium dopant concentrations in high power fiber amplifiers has been investigated. It is theoretically shown that, by only varying the fiber length to maintain the same total small-signal pump absorption, the MI threshold is independent of dopant concentration. MI thresholds of gain fibers with ytterbium dopant concentration of 5.93X10^25/m3 and 1.02X10^… ▽ More Dependence of mode instabilities (MI) on ytterbium dopant concentrations in high power fiber amplifiers has been investigated. It is theoretically shown that, by only varying the fiber length to maintain the same total small-signal pump absorption, the MI threshold is independent of dopant concentration. MI thresholds of gain fibers with ytterbium dopant concentration of 5.93X10^25/m3 and 1.02X10^26/m3 have been measured, which exhibit similar thresholds and agree with theoretical results. The result indicates that heavy do** of active fiber can be adopted to suppress nonlinear effects without decreasing MI threshold, which provides a method of maximizing the power output of fiber laser, taking into account the stimulated Brillouin scattering, stimulated Raman Scattering, and MI thresholds simultaneously. △ Less

Submitted 21 November, 2015; originally announced November 2015.

Comments: 5 pages, 4 figures

Journal ref: Laser Phys. 26 065103 2016

Study of wavelength dependence of mode instability based on a semi-analytical model

Authors: Rumao Tao, Pengfei Ma, Xiaolin Wang, Pu Zhou, Ze** Liu

Abstract: We present theoretical study of wavelength dependence of mode instability (MI) in high power fiber lasers, which employs an improved semi-analytical theoretical model. The influence of pump / seed wavelength and photodarkening on threshold has been studied. The results indicate promising MI suppression through pum** or seeding at an appropriate wavelength. Small amounts of photodarkening can lea… ▽ More We present theoretical study of wavelength dependence of mode instability (MI) in high power fiber lasers, which employs an improved semi-analytical theoretical model. The influence of pump / seed wavelength and photodarkening on threshold has been studied. The results indicate promising MI suppression through pum** or seeding at an appropriate wavelength. Small amounts of photodarkening can lead to significant impact on MI. △ Less

Submitted 25 June, 2015; originally announced June 2015.

Comments: 6 pages, 5 figures

Journal ref: Journal of Quantum Electronics vol. 51(8), pp. 1-6, AUGUST 2015

Influence of core NA on Thermal-Induced Mode Instabilities in High Power Fiber Amplifiers

Authors: Rumao Tao, Pengfei Ma, Xiaolin Wang, Pu Zhou, Ze** Liu

Abstract: We report on the influence of core NA on thermal-induced mode instabilities (MI) in high power fiber amplifiers. Influence of core NA and V-parameter on MI has been investigated numerically. It shows that core NA has larger influence on MI for fibers with smaller core-cladding-ratio, and the influence of core NA on threshold is more obvious when the amplifiers are pumped at 915nm. The dependence o… ▽ More We report on the influence of core NA on thermal-induced mode instabilities (MI) in high power fiber amplifiers. Influence of core NA and V-parameter on MI has been investigated numerically. It shows that core NA has larger influence on MI for fibers with smaller core-cladding-ratio, and the influence of core NA on threshold is more obvious when the amplifiers are pumped at 915nm. The dependence of threshold on V-parameter revealed that the threshold increases linearly as V-parameter decreases when V-parameter is larger than 3.5, and the threshold shows exponentially increase as V-parameter decreases when V-parameter is less than 3.5. We also discussed the effect of linewidth on MI, which indicates that the influence of linewidth can be neglected for linewidth smaller than 1nm when the fiber core NA is smaller than 0.07 and fiber length is shorter than 20m. Fiber amplifiers with different core NA were experimentally analyzed, which agreed with the theoretical predictions. △ Less

Submitted 3 June, 2015; originally announced June 2015.

Comments: 6 pages, 11 figures

Journal ref: Laser Phys. Lett. vol. 12, pp. 085101 (2015)

Polarization Effects on Thermal-Induced Mode Instabilities in High Power Fiber Lasers

Authors: Rumao Tao, Pengfei Ma, Xiaolin Wang, Pu Zhou, Ze** Liu

Abstract: We present detailed studies of the effect of polarization on thermal-induced mode instability (MI) in ytterbium-doped fiber amplifiers. Based on a steady-state theoretical model, which takes both electric fields along the two principal axes into consideration, the effect of polarization effects on the gain of Stokes wave was analyzed, which shows that the polarization characteristics of the fiber… ▽ More We present detailed studies of the effect of polarization on thermal-induced mode instability (MI) in ytterbium-doped fiber amplifiers. Based on a steady-state theoretical model, which takes both electric fields along the two principal axes into consideration, the effect of polarization effects on the gain of Stokes wave was analyzed, which shows that the polarization characteristics of the fiber laser have no impact on the threshold of MI. Experimental validation of the theoretical analysis is presented with experimental results agreeing well with the theoretical results, in which polarization-maintained and non-polarization-maintained fiber lasers with core/inner cladding diameter of 30/250um and core NA of 0.07 were employed. The MI threshold power is measured to be about 367~386W. △ Less

Submitted 30 March, 2015; v1 submitted 27 March, 2015; originally announced March 2015.

Comments: 6 pages, 3 figures

Mitigating of Modal Instabilities in Linearly-Polarized Fiber Amplifiers by Shifting Pump Wavelength

Authors: Rumao Tao, Pengfei Ma, Xiaolin Wang, Pu Zhou, Ze** Liu

Abstract: We investigated the effct of pump wavelength on the modal instabilities (MI) in high power linearly-polarized Yb-doped fiber amplifiers. We built a novel semi-analytical model to determine the frequency coupling characteristics and power threshold of MI, which indicates promising MI suppression through pum** at an appropriate wavelength. By pum** at 915nm, the threshold can be enhanced by a fa… ▽ More We investigated the effct of pump wavelength on the modal instabilities (MI) in high power linearly-polarized Yb-doped fiber amplifiers. We built a novel semi-analytical model to determine the frequency coupling characteristics and power threshold of MI, which indicates promising MI suppression through pum** at an appropriate wavelength. By pum** at 915nm, the threshold can be enhanced by a factor of 2.36 as compared to that pumped at 976nm. Based on a high power linearly-polarized fiber amplifier platform, we studied the influence of pump wavelength experimentally. The threshold has been increased by a factor of 2 at 915nm, which agrees with the theoretical calculation and verified our theoretical model. Furthermore, we show that MI suppression by detuning the pump wavelength is weakened for fiber with large core-to-cladding ratio. △ Less

Submitted 2 December, 2014; originally announced December 2014.

Comments: 4 pages, 4 figures

Journal ref: J. Opt. 17 (2015) 045504

1.3kW monolithic linearly-polarized single-mode MOPA and strategies for mitigating mode instabilities

Authors: Rumao Tao, Pengfei Ma, Xiaolin Wang, Pu Zhou, Ze** Liu

Abstract: We report on the high power amplification of 1064nm linearly-polarized laser in all-fiber polarization-maintained MOPA, which can operate at output power level of 1.3kW. The main amplifier was pumped with six 915nm laser diodes, and the slope efficiency is 65.3%. The beam quality (M2) was measured to be <1.2 at full power operation. The polarization extinction rate of the fiber amplifier was measu… ▽ More We report on the high power amplification of 1064nm linearly-polarized laser in all-fiber polarization-maintained MOPA, which can operate at output power level of 1.3kW. The main amplifier was pumped with six 915nm laser diodes, and the slope efficiency is 65.3%. The beam quality (M2) was measured to be <1.2 at full power operation. The polarization extinction rate of the fiber amplifier was measured to be above 94% before mode instabilities (MI) sets in, which reduced to about 90% after the onset of MI. Power scaling capability of strategies for suppressing MI is analyzed based on a novel semi-analytical model, the theoretical results of which agree with the experimental results. It shows that mitigating MI by coiling the gain fiber is an effective and practical way in standard double-cladding large mode area fiber, and, by tight coiling of the gain fiber to the radius of 5.5cm, the MI threshold can be increased to 3 times higher than that without coiling or loose coiling. Experimental study has been carried out to verify the idea, which has proved that MI was suppressed successfully in the amplifier by tight coiling. △ Less

Submitted 23 October, 2014; originally announced October 2014.

Comments: 10 pages, 7 figures

MSC Class: 78A60

Journal ref: Photonics Research Vol. 3, Issue 3, pp. 86-93 (2015)

Controlling elastic wave with isotropic transformation materials

Authors: Zheng Chang, ** Hu, Gengkai Hu, Ran Tao, Yue Wang

Abstract: There are great demands to design functional devices with isotropic materials, however the transformation method usually leads to anisotropic material parameters difficult to be realized in practice. In this letter, we derive the isotropic transformed material parameters in case of elastodynamic under local conformal transformation, they are subsequently used to design a beam bender, a four-beam a… ▽ More There are great demands to design functional devices with isotropic materials, however the transformation method usually leads to anisotropic material parameters difficult to be realized in practice. In this letter, we derive the isotropic transformed material parameters in case of elastodynamic under local conformal transformation, they are subsequently used to design a beam bender, a four-beam antenna and an approximate carpet cloak for elastic wave with isotropic materials, the simulation results validate the derived transformed material parameters. The obtained materials are isotropic and greatly simplify subsequent experimental implementation. △ Less

Submitted 24 November, 2010; originally announced November 2010.

Comments: 12 pages, 3 figures

Journal ref: Appl. Phys. Lett. 98, 121904 (2011)