-
Optical Quantum Sensing for Agnostic Environments via Deep Learning
Authors:
Zeqiao Zhou,
Yuxuan Du,
Xu-Fei Yin,
Shanshan Zhao,
Xinmei Tian,
Dacheng Tao
Abstract:
Optical quantum sensing promises measurement precision beyond classical sensors termed the Heisenberg limit (HL). However, conventional methodologies often rely on prior knowledge of the target system to achieve HL, presenting challenges in practical applications. Addressing this limitation, we introduce an innovative Deep Learning-based Quantum Sensing scheme (DQS), enabling optical quantum senso…
▽ More
Optical quantum sensing promises measurement precision beyond classical sensors termed the Heisenberg limit (HL). However, conventional methodologies often rely on prior knowledge of the target system to achieve HL, presenting challenges in practical applications. Addressing this limitation, we introduce an innovative Deep Learning-based Quantum Sensing scheme (DQS), enabling optical quantum sensors to attain HL in agnostic environments. DQS incorporates two essential components: a Graph Neural Network (GNN) predictor and a trigonometric interpolation algorithm. Operating within a data-driven paradigm, DQS utilizes the GNN predictor, trained on offline data, to unveil the intrinsic relationships between the optical setups employed in preparing the probe state and the resulting quantum Fisher information (QFI) after interaction with the agnostic environment. This distilled knowledge facilitates the identification of optimal optical setups associated with maximal QFI. Subsequently, DQS employs a trigonometric interpolation algorithm to recover the unknown parameter estimates for the identified optical setups. Extensive experiments are conducted to investigate the performance of DQS under different settings up to eight photons. Our findings not only offer a new lens through which to accelerate optical quantum sensing tasks but also catalyze future research integrating deep learning and quantum mechanics.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Label-free image scanning microscopy for kHz super-resolution imaging and single particle tracking
Authors:
Duc-Minh Ta,
Alberto Aguilar,
Pierre Bon
Abstract:
We report the modification of a label-free image scanning microscope (ISM) to perform asynchronous 2D imaging at 24kHz while kee** the lateral resolution gain and background rejection of a regular label-free ISM setup. Our method uses a resonant mirror oscillating at 12kHz for one-direction scanning and a chromatic line for instantaneous scanning in the other direction. We adapt optical photon r…
▽ More
We report the modification of a label-free image scanning microscope (ISM) to perform asynchronous 2D imaging at 24kHz while kee** the lateral resolution gain and background rejection of a regular label-free ISM setup. Our method uses a resonant mirror oscillating at 12kHz for one-direction scanning and a chromatic line for instantaneous scanning in the other direction. We adapt optical photon reassignment in this scanning regime to perform fully optical super-resolution imaging. We exploit the kHz imaging capabilities of this confocal imaging system for single nanoparticle tracking down to 20nm for gold and 50nm for silica particles as well as imaging freely moving Lactobacillus with improved resolution.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
Carbon Emissions of Quantum Circuit Simulation: More than You Would Think
Authors:
**yang Li,
Qiang Guan,
Dingwen Tao,
Weiwen Jiang
Abstract:
The rapid advancement of quantum hardware brings a host of research opportunities and the potential for quantum advantages across numerous fields. In this landscape, quantum circuit simulations serve as an indispensable tool by emulating quantum behavior on classical computers. They offer easy access, noise-free environments, and real-time observation of quantum states. However, the sustainability…
▽ More
The rapid advancement of quantum hardware brings a host of research opportunities and the potential for quantum advantages across numerous fields. In this landscape, quantum circuit simulations serve as an indispensable tool by emulating quantum behavior on classical computers. They offer easy access, noise-free environments, and real-time observation of quantum states. However, the sustainability aspect of quantum circuit simulation is yet to be explored. In this paper, we introduce for the first time the concept of environmental impact from quantum circuit simulation. We present a preliminary model to compute the CO2e emissions derived from quantum circuit simulations. Our results indicate that large quantum circuit simulations (43 qubits) could lead to CO2e emissions 48 times greater than training a transformer machine learning model.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
TeD-Q: a tensor network enhanced distributed hybrid quantum machine learning framework
Authors:
Yaocheng Chen,
Xingyao Wu,
Chung-Yun Kuo,
Yuxuan Du,
Dacheng Tao
Abstract:
TeD-Q is an open-source software framework for quantum machine learning, variational quantum algorithm (VQA), and simulation of quantum computing. It seamlessly integrates classical machine learning libraries with quantum simulators, giving users the ability to leverage the power of classical machine learning while training quantum machine learning models. TeD-Q supports auto-differentiation that…
▽ More
TeD-Q is an open-source software framework for quantum machine learning, variational quantum algorithm (VQA), and simulation of quantum computing. It seamlessly integrates classical machine learning libraries with quantum simulators, giving users the ability to leverage the power of classical machine learning while training quantum machine learning models. TeD-Q supports auto-differentiation that provides backpropagation, parameters shift, and finite difference methods to obtain gradients. With tensor contraction, simulation of quantum circuits with large number of qubits is possible. TeD-Q also provides a graphical mode in which the quantum circuit and the training progress can be visualized in real-time.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Seismic-ionospheric disturbances in ionospheric TEC and plasma parameters associated with the 14 July 2019 Mw 7.2 Laiwui earthquake detected by the GPS and CSES
Authors:
Yuanzheng Wen,
Guangxue Wang,
Dan Tao,
Zeren Zhima,
Yijia Zong,
Xuhui Shen
Abstract:
In this study, with cross-valid analysis of total electron content (TEC) data of the global ionospheric map (GIM) from GPS and plasma parameters data recorded by China Seismo-Electromagnetic Satellite (CSES), signatures of seismic-ionospheric perturbations related to the 14 July 2019 Mw7.2 Laiwui earthquake were detected. After distinguishing the solar and geomagnetic activities, three positive te…
▽ More
In this study, with cross-valid analysis of total electron content (TEC) data of the global ionospheric map (GIM) from GPS and plasma parameters data recorded by China Seismo-Electromagnetic Satellite (CSES), signatures of seismic-ionospheric perturbations related to the 14 July 2019 Mw7.2 Laiwui earthquake were detected. After distinguishing the solar and geomagnetic activities, three positive temporal anomalies were found around the epicenter 1 day, 3 days and 8 days before the earthquake (14 July 2019) along with a negative anomaly 6 days after the earthquake, which also agrees well with the TEC spatial variations in latitude-longitude-time (LLT) maps. To further confirm the anomalies, the ionospheric plasma parameters (electron, O+and He+densities) recorded by the Langmuir probe (LAP) and Plasma Analyzer Package (PAP) onboard CSES were analyzed by using the moving mean method (MMM), which also presented remarkable enhancements along the orbits around the epicenter on day 2, day 4 and day 7 before the earthquake. To make the investigations more convincing, the disturbed orbits were compared with their corresponding four nearest revisiting orbits, whose results indeed indicate the existence of plasma parameters anomalies associated with the Laiwui earthquake. All these results illustrated that the GPS and CSES observed unusual ionospheric perturbations are highly associated with the Mw 7.2 Laiwui earthquake, which also strongly indicates the existence of pre-seismic ionospheric anomalies over the earthquake region
△ Less
Submitted 6 February, 2021;
originally announced February 2021.
-
Global Trigger Technological Demonstrator for ATLAS Phase-II upgrade
Authors:
Viacheslav Filimonov,
Bruno Bauss,
Volker Büscher,
Ulrich Schäfer,
Duc Bao Ta
Abstract:
ATLAS detector at the LHC will undergo a major Phase-II upgrade for the High Luminosity LHC. The upgrade affects all major ATLAS systems, including the Trigger and Data Acquisition systems. As part of the Level-0 Trigger System, the Global Trigger uses full-granularity calorimeter cells to perform algorithms, refines the trigger objects and applies topological requirements. The Global Trigger uses…
▽ More
ATLAS detector at the LHC will undergo a major Phase-II upgrade for the High Luminosity LHC. The upgrade affects all major ATLAS systems, including the Trigger and Data Acquisition systems. As part of the Level-0 Trigger System, the Global Trigger uses full-granularity calorimeter cells to perform algorithms, refines the trigger objects and applies topological requirements. The Global Trigger uses a Global Common Module as the building block of its design. To achieve a high input and output bandwidth and substantial processing power, the Global Common Module will host the most advanced FPGAs and optical modules. In order to evaluate the new generation of optical modules and FPGAs running at high data rates (up to 28 Gb/s), a Global Trigger Technological Demonstrator board has been designed and tested. The main hardware blocks of the board are the Xilinx Virtex Ultrascale+ 9P FPGA and a number of optical modules, including high-speed Finisar BOA and Samtec FireFly modules. Long-run link tests have been performed for the Finisar BOA and Samtec FireFly optical modules running at 25.65 and 27.58 Gb/s respectively. Successful results demonstrating a good performance of the optical modules when communicating with the FPGA have been obtained. The paper provides a hardware overview and measurement results of the Technological Demonstrator.
△ Less
Submitted 15 October, 2020;
originally announced October 2020.
-
Protein-based microsphere biolasers fabricated by dehydration
Authors:
Toan Van Nguyen,
Nhat Van Pham,
Hanh Hong Mai,
Dung Chi Duong,
Hai Hoang Le,
Riccardo Sapienza,
Van Duong Ta
Abstract:
Biolasers made of biological materials have attracted a great of research attention due to their biocompatibility and biodegradability, which have the potential for biosensors and biointegration. However, the current fabrication method of biolasers suffers several limitations such as complicated processes, time-consuming and environmental unfriendly. In this work, a novel approach with green proce…
▽ More
Biolasers made of biological materials have attracted a great of research attention due to their biocompatibility and biodegradability, which have the potential for biosensors and biointegration. However, the current fabrication method of biolasers suffers several limitations such as complicated processes, time-consuming and environmental unfriendly. In this work, a novel approach with green processes for fabricating solid-state microspheres biolasers is demonstrated. By using dehydration via a modified MicroglassificationTM technology, dye-doped bovine serum albumin (BSA) droplets can quickly (less than 10 minutes) and easily turn into solid microspheres with the diameter ranging from 10-150 μm. The size of the microspheres can be effectively controlled by changing either the concentration of BSA solution or the diameter of the initial droplets. Fabricated microspheres can act as efficient microlasers under optical pulse excitation. Lasing threshold of 7.8 μJ mm-2 and quality (Q) factor of about 1700 to 3100 are obtained. The size-dependence of lasing characteristics have been investigated and the results show a good agreement with whispering gallery mode (WGM) theory. Our finding contributes an effective technique for the fabrication of high Q factor microlasers that may be potential for applications in biological and chemical sensors.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
Flexible and tensile microporous polymer fibers for wavelength-tunable random lasing
Authors:
Van Duong Ta,
Dhruv Saxena,
Soraya Caixeiro,
Riccardo Sapienza
Abstract:
Flexible and tensile wavelength-tunable micrometer-sized random lasers in the form of microporous polymer fiber are demonstrated. The fibers are fabricated by directly drawing from an aqueous mixture and subsequently selective chemical etching in a green solvent. Size-dependent lasing threshold and spectrum are investigated. Owing to mechanical flexibility, wavelength-tuning of 5.5 nm is achieved…
▽ More
Flexible and tensile wavelength-tunable micrometer-sized random lasers in the form of microporous polymer fiber are demonstrated. The fibers are fabricated by directly drawing from an aqueous mixture and subsequently selective chemical etching in a green solvent. Size-dependent lasing threshold and spectrum are investigated. Owing to mechanical flexibility, wavelength-tuning of 5.5 nm is achieved by stretching the fiber.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
Understanding GPU-Based Lossy Compression for Extreme-Scale Cosmological Simulations
Authors:
Sian **,
Pascal Grosset,
Christopher M. Biwer,
Jesus Pulido,
Jiannan Tian,
Dingwen Tao,
James Ahrens
Abstract:
To help understand our universe better, researchers and scientists currently run extreme-scale cosmology simulations on leadership supercomputers. However, such simulations can generate large amounts of scientific data, which often result in expensive costs in data associated with data movement and storage. Lossy compression techniques have become attractive because they significantly reduce data…
▽ More
To help understand our universe better, researchers and scientists currently run extreme-scale cosmology simulations on leadership supercomputers. However, such simulations can generate large amounts of scientific data, which often result in expensive costs in data associated with data movement and storage. Lossy compression techniques have become attractive because they significantly reduce data size and can maintain high data fidelity for post-analysis. In this paper, we propose to use GPU-based lossy compression for extreme-scale cosmological simulations. Our contributions are threefold: (1) we implement multiple GPU-based lossy compressors to our opensource compression benchmark and analysis framework named Foresight; (2) we use Foresight to comprehensively evaluate the practicality of using GPU-based lossy compression on two real-world extreme-scale cosmology simulations, namely HACC and Nyx, based on a series of assessment metrics; and (3) we develop a general optimization guideline on how to determine the best-fit configurations for different lossy compressors and cosmological simulations. Experiments show that GPU-based lossy compression can provide necessary accuracy on post-analysis for cosmological simulations and high compression ratio of 5~15x on the tested datasets, as well as much higher compression and decompression throughput than CPU-based compressors.
△ Less
Submitted 2 July, 2020; v1 submitted 1 April, 2020;
originally announced April 2020.
-
A new high speed, Ultrascale+ based board for the ATLAS jet calorimeter trigger system
Authors:
B. Bauss,
A. Brogna,
V. Bücher,
J. Damp,
R. Degele,
H. Herr,
C. Kahra,
S. Rave,
E. Rocco,
U. Schäfer,
J. Souza,
D. B. Ta,
S. Tapprogge,
M. Weirich
Abstract:
To cope with the enhanced luminosity at the Large Hadron Collider (LHC) in 2021, the ATLAS collaboration is planning a major detector upgrade. As a part of this, the Level 1 trigger based on calorimeter data will be upgraded to exploit the fine granularity readout using a new system of Feature EXtractors (FEX), which each reconstruct different physics objects for the trigger selection. The jet FEX…
▽ More
To cope with the enhanced luminosity at the Large Hadron Collider (LHC) in 2021, the ATLAS collaboration is planning a major detector upgrade. As a part of this, the Level 1 trigger based on calorimeter data will be upgraded to exploit the fine granularity readout using a new system of Feature EXtractors (FEX), which each reconstruct different physics objects for the trigger selection. The jet FEX (jFEX) system is conceived to provide jet identification (including large area jets) and measurements of global variables within a latency budget of less then 400ns. It consists of 6 modules. A single jFEX module is an ATCA board with 4 large FPGAs of the Xilinx Ultrascale+ family, that can digest a total input data rate of ~3.6 Tb/s using up to 120 Multi Gigabit Transceiver (MGT), 24 electrical optical devices, board control and power on the mezzanines to allow flexibility in upgrading controls functions and components without affecting the main board. The 24-layers stack-up was carefully designed to preserve the signal integrity in a very densely populated high speed signal board selecting MEGTRON6 as the most suitable PCB material. This contribution reports on the design challenges and the test results of the jFEX prototypes. In particular the fully assembled final prototype has been tested up to 12.8 Gb/s in house and in integrated tests at CERN. The full jFEX system will be produced by the end of 2018 to allow for installation and commissioning to be completed before LHC restarts in March 2021.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
Transmission matrix approaches for non-linear fluorescence excitation through multiple scattering media
Authors:
Mickael Mounaix,
Duc Minh Ta,
Sylvain Gigan
Abstract:
Several matrix approaches were developed to control light propagation through multiple scattering media under illumination of ultrashort pulses of light. These matrices can be recorded either with spectral or temporal resolution. Thanks to wavefront sha**, temporal and spatial refocusing have been demonstrated. In this work, we study how these different methods can be exploited to enhance a two-…
▽ More
Several matrix approaches were developed to control light propagation through multiple scattering media under illumination of ultrashort pulses of light. These matrices can be recorded either with spectral or temporal resolution. Thanks to wavefront sha**, temporal and spatial refocusing have been demonstrated. In this work, we study how these different methods can be exploited to enhance a two-photon excitation fluorescence process. We first compare the different techniques on micrometer-size isolated fluorescent beads. We then demonstrate point-scanning imaging of such fluorescent microbeads located after a thick scattering medium, at a depth where conventional imaging would be impossible because of scattering effects.
△ Less
Submitted 6 June, 2018; v1 submitted 19 March, 2018;
originally announced March 2018.
-
Microsphere solid state biolasers
Authors:
Van Duong Ta,
Soraya Caixeiro,
Francisco M. Fernandes,
Riccardo Sapienza
Abstract:
Microsphere solid-state biolasers made of biomaterials-bovine serum albumin, pectin and cellulose are demonstrated. The fabrication is simple, based on emulsion, and with green processing. A lasing threshold of 1 microJ/mm2 and Q factor of 3000 are measured. The lasers are biocompatible, do not interfere with cell growth and division.
Microsphere solid-state biolasers made of biomaterials-bovine serum albumin, pectin and cellulose are demonstrated. The fabrication is simple, based on emulsion, and with green processing. A lasing threshold of 1 microJ/mm2 and Q factor of 3000 are measured. The lasers are biocompatible, do not interfere with cell growth and division.
△ Less
Submitted 6 February, 2017;
originally announced February 2017.
-
In Situ Simultaneous Measuring Forces Acted on Individual Legs of Water Striders According to Archimedes' Principle
Authors:
Yelong Zheng,
Hongyu Lu,
Wei Yin,
Dashuai Tao,
Lichun Shi,
Yu Tian
Abstract:
The supporting forces of all the legs have been simultaneously measured through a natural phenomenon inspired shadow method, by capturing water strider leg shadows to calculate the expelled water volume and the equivalent floating forces according to Archimedes' principle, with a sensitivity up to nN~pN/pixel. The method was verified by comparing to electronic balance to weight water striders. The…
▽ More
The supporting forces of all the legs have been simultaneously measured through a natural phenomenon inspired shadow method, by capturing water strider leg shadows to calculate the expelled water volume and the equivalent floating forces according to Archimedes' principle, with a sensitivity up to nN~pN/pixel. The method was verified by comparing to electronic balance to weight water striders. The supporting force acted on legs was found to linearly proportional to its shadow area, which geometry clearly indicated the hydrophobicity of legs. The pressed depth of legs, vertical weight focus position change and body pitch angle during leg refreshing, sculling and jum** forward of water striders have been achieved with resolutions of 5um/pixel, 2 um/pixel, and 0.02 degree, respectively, which is difficult for general imaging technologies. The shadow method was also developed into a force measuring device and characterized the adhesion force of a hair/polymer surface contact in a few uN with a 0.3 nN/pixel resolution.
△ Less
Submitted 4 January, 2016;
originally announced January 2016.
-
Concept, realization and characterization of serially powered pixel modules (Serial Powering)
Authors:
D. B. Ta,
T. Stockmanns,
F. Huegging,
P. Fischer,
J. Grosse-Knetter Oe. Runolfsson,
N. Wermes
Abstract:
We prove and demonstrate here for the example of the large scale pixel detector of ATLAS that Serial Powering of pixel modules is a viable alternative and that has been devised and implemented for ATLAS pixel modules using dedicated on-chip voltage regulators and modified flex hybrids circuits. The equivalent of a pixel ladder consisting of six serially powered pixel modules with about 0.3Mpixel…
▽ More
We prove and demonstrate here for the example of the large scale pixel detector of ATLAS that Serial Powering of pixel modules is a viable alternative and that has been devised and implemented for ATLAS pixel modules using dedicated on-chip voltage regulators and modified flex hybrids circuits. The equivalent of a pixel ladder consisting of six serially powered pixel modules with about 0.3Mpixels has been built and the performance with respect to noise and threshold stability and operation failures has been studied. We believe that Serial Powering in general will be necessary for future large scale tracking detectors.
△ Less
Submitted 24 April, 2006;
originally announced April 2006.
