-
Low threshold optical bistability based on MoS2 in asymmetric Fabry-Perot cavity structure in visible light band
Authors:
Songqing Tang,
Mengjiao Ren,
Zhiheng Li,
Zhiwei Zheng,
Leyong Jiang
Abstract:
This article theoretically proposes a multi-layer Fabry-Perot cavity structure based on nonlinear MoS2, whose cavity is composed of asymmetric photonic crystals. In this structure, we observed a low threshold optical bistability phenomenon on the order of a in the visible light band, which is caused by the large third-order nonlinear conductivity of the bilayer MoS2 and the Fabry-Perot cavity reso…
▽ More
This article theoretically proposes a multi-layer Fabry-Perot cavity structure based on nonlinear MoS2, whose cavity is composed of asymmetric photonic crystals. In this structure, we observed a low threshold optical bistability phenomenon on the order of a in the visible light band, which is caused by the large third-order nonlinear conductivity of the bilayer MoS2 and the Fabry-Perot cavity resonance. Research has found that when light is incident from two different directions in an asymmetric Fabry-Perot cavity, the optical bistability exhibits not exactly the same behavior. In addition, we further investigated and found that the optical bistability behavior in this simple multi-layer structure is closely related to parameters such as incident wavelength, Fabry-Perot cavity length, and refractive index of the photonic crystal dielectric. This work provides a new approach for the implementation of low threshold optical bistable devices in the visible light band, which is expected to be applied in nonlinear optical fields such as all optical switches and all optical logic devices.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
MoS2-based optical bistability in silver-Bragg reflector multilayer structure at visible light band
Authors:
Songqing Tang,
Mengjiao Ren,
Zhiheng Li,
Zhiwei Zheng,
Leyong Jiang
Abstract:
In this paper, we present a theoretical analysis of the optical bistability in a metallic silver-Bragg reflector structure by embedding bilayer MoS2 at the visible band. The nonlinear OB is achieved due to the nonlinear conductivity of the bilayer MoS2 and the excitation of the optical Tamm state at the interface between the silver and the Bragg reflector. It is found that the hysteresis behaviour…
▽ More
In this paper, we present a theoretical analysis of the optical bistability in a metallic silver-Bragg reflector structure by embedding bilayer MoS2 at the visible band. The nonlinear OB is achieved due to the nonlinear conductivity of the bilayer MoS2 and the excitation of the optical Tamm state at the interface between the silver and the Bragg reflector. It is found that the hysteresis behaviour and the threshold width of the OB can be effectively tuned by varying the incident light wavelength. In addition, the optical bistable behaviour of the structure can be adjusted by varying the position of the MoS2 inset in the defect layer, incident angle and the structural parameters of the spacer layer. Although the current threshold cannot be commercialized, we believe that this solution will provide a meaningful path reference for low threshold bistability in the visible light band.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
Tunable Collective Excitations in Epitaxial Perovskite Nickelates
Authors:
Mengxia Sun,
Xu He,
Mingyao Chen,
Chi Sin Tang,
Xiongfang Liu,
Liang Dai,
Jishan Liu,
Zhigang Zeng,
Shuo Sun,
Mark B. H. Breese,
Chuanbing Cai,
Yingge Du,
Le Wang,
Andrew T. S. Wee,
Xinmao Yin
Abstract:
The formation of plasmons through the collective excitation of charge density has generated intense discussions, offering insights to fundamental sciences and potential applications. While the underlying physical principles have been well-established, the effects of many-body interactions and orbital hybridization on plasmonic dynamics remain understudied. In this work, we present the observation…
▽ More
The formation of plasmons through the collective excitation of charge density has generated intense discussions, offering insights to fundamental sciences and potential applications. While the underlying physical principles have been well-established, the effects of many-body interactions and orbital hybridization on plasmonic dynamics remain understudied. In this work, we present the observation of conventional metallic and correlated plasmons in epitaxial La1-xSrxNiO3 (LSNO) films with varying Sr do** concentrations (x = 0, 0.125, 0.25), unveiling their intriguing evolution. Unlike samples at other do** concentrations, the x = 0.125 intermediate do** sample does not exhibit the correlated plasmons despite showing high optical conductivity. Through a comprehensive experimental investigation using spectroscopic ellipsometry and X-ray absorption spectroscopy, the O2p-Ni3d orbital hybridization for LSNO with a do** concentration of x = 0.125 is found to be significantly enhanced, alongside a considerable weakening of its effective correlation U*. These factors account for the absence of correlated plasmons and the high optical conductivity observed in LSNO (0.125). Our results underscore the profound impact of orbital hybridization on the electronic structure and the formation of plasmon in strongly-correlated systems. This in turn suggest that LSNO could serve as a promising alternative material in optoelectronic devices.
△ Less
Submitted 1 June, 2024; v1 submitted 29 April, 2024;
originally announced April 2024.
-
Realization of a Two-Dimensional Lieb Lattice in a Metal-Inorganic Framework with Flat Bands and Topological Edge States
Authors:
Wenjun Wu,
Shuo Sun,
Chi Sin Tang,
**g Wu,
Yu Ma,
Lingfeng Zhang,
Chuanbing Cai,
Jianxin Zhong,
Milorad V. Milošević,
Andrew T. S. Wee,
Xinmao Yin
Abstract:
Flat bands and Dirac cones in materials are at the source of the exotic electronic and topological properties. The Lieb lattice is expected to host these electronic structures, arising from quantum destructive interference. Nevertheless, the experimental realization of a two-dimensional Lieb lattice remained challenging to date due to its intrinsic structural instability. After computationally des…
▽ More
Flat bands and Dirac cones in materials are at the source of the exotic electronic and topological properties. The Lieb lattice is expected to host these electronic structures, arising from quantum destructive interference. Nevertheless, the experimental realization of a two-dimensional Lieb lattice remained challenging to date due to its intrinsic structural instability. After computationally designing a Platinum-Phosphorus (Pt-P) Lieb lattice, we have successfully overcome its structural instability and synthesized it on a gold substrate via molecular beam epitaxy. Low-temperature scanning tunneling microscopy and spectroscopy verified the Lieb lattice's morphology and electronic flat bands. Furthermore, topological Dirac edge states stemming from pronounced spin-orbit coupling induced by heavy Pt atoms have been predicted. These findings convincingly open perspectives for creating metal-inorganic framework-based atomic lattices, offering prospects for strongly correlated phases interplayed with topology.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Characterization of the ATLAS Liquid Argon Front-End ASIC ALFE2 for the HL-LHC upgrade
Authors:
D. Matakias,
G. Carini,
H. Chen,
M. Dabrowski,
G. Deptuch,
L. Duflot,
J. Kierstead,
T. Liu,
H. Ma,
N. Morange,
S. Rescia,
S. Tang,
H. Xu
Abstract:
ALFE2 is an ATLAS Liquid Argon Calorimeter (LAr) Front-End ASIC designed for the HL-LHC upgrade. ALFE2 comprises four channels of pre-amplifiers and CR-(RC)2 shapers with adjustable input impedance. ALFE2 features two separate gain outputs to provide 16-bit dynamic-range coverage and an optimum resolution. ALFE2 is characterized using a Front-End Test Board (FETB) based on a Zynq UltraScale+ MPSoC…
▽ More
ALFE2 is an ATLAS Liquid Argon Calorimeter (LAr) Front-End ASIC designed for the HL-LHC upgrade. ALFE2 comprises four channels of pre-amplifiers and CR-(RC)2 shapers with adjustable input impedance. ALFE2 features two separate gain outputs to provide 16-bit dynamic-range coverage and an optimum resolution. ALFE2 is characterized using a Front-End Test Board (FETB) based on a Zynq UltraScale+ MPSoC and two octal-channel 16-bit high-speed ADCs. The test results indicate that ALFE2 fulfills or greatly exceeds all specifications on gain, noise, linearity, uniformity, and radiation tolerance.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1300 additional authors not shown)
Abstract:
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 9 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Interferences effects in polarized nonlinear Breit-Wheeler process
Authors:
**g-**g Jiang,
Ya-Nan Dai,
Kai-Hong Zhuang,
Yunquan Gao,
Suo Tang,
Yue-Yue Chen
Abstract:
The creation of polarized electron-positron pairs by the nonlinear Breit-Wheeler process in short laser pulses is investigated using the Baier-Katkov semiclassical method beyond local-constant-field approximation (LCFA), which allows for identifying the interferences effects in the positron polarization. When the laser intensity is in the intermediate %multiphoton regime, the interferences of pair…
▽ More
The creation of polarized electron-positron pairs by the nonlinear Breit-Wheeler process in short laser pulses is investigated using the Baier-Katkov semiclassical method beyond local-constant-field approximation (LCFA), which allows for identifying the interferences effects in the positron polarization. When the laser intensity is in the intermediate %multiphoton regime, the interferences of pair production in different formation lengths induce an enhancement of pair production probability for spin-down positrons, which significantly affects the polarization of created positrons. The polarization features are distinct from that obtained with LCFA, revealing the invalidity of LCFA in this regime. Meanwhile, the angular distribution for different spin states varies, resulting in an angular-dependent polarization of positrons. The average polarization of positrons at beam center is highly sensitive to the laser's carrier-envelope phase (CEP), which provides a potential alternative way of determining the CEP of strong lasers. The verification of the observed interference phenomenon is possible for the upcoming experiments.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Optical detection of small polarons in vanadium dioxide and their critical role in mediating metal-insulator transition
Authors:
Xiongfang Liu,
Tong Yang,
**g Wu,
Mengxia Sun,
Mingyao Chen,
Chi Sin Tang,
Kun Han,
Difan Zhou,
Shengwei Zeng,
Shuo Sun,
Sensen Li,
Ming Yang,
Mark B. H. Breese,
Chuanbing Cai,
Thirumalai Venkatesan,
Andrew T. S. Wee,
Xinmao Yin
Abstract:
In the pursuit of advanced photoelectric devices, researchers have uncovered near room-temperature metal-insulator transitions (MIT) in non-volatile VO2. Although theoretical investigations propose that polaron dynamics mediate the MIT, direct experimental evidence remains scarce. In this study, we present direct evidence of the polaron state in insulating VO2 through high-resolution spectroscopic…
▽ More
In the pursuit of advanced photoelectric devices, researchers have uncovered near room-temperature metal-insulator transitions (MIT) in non-volatile VO2. Although theoretical investigations propose that polaron dynamics mediate the MIT, direct experimental evidence remains scarce. In this study, we present direct evidence of the polaron state in insulating VO2 through high-resolution spectroscopic ellipsometry measurements and first-principles calculations. We demonstrate that polaron dynamics play a complementary role in facilitating Peierls and Mott transitions to contribute to the MIT processes. Moreover, our observations and characterizations of conventional metallic and correlated plasmons in the respective phases of the VO2 film provide valuable insights into their electron structures. This study provides an understanding of the MIT mechanism in correlated systems and highlights how polarons, lattice distortions and electron correlations facilitate the phase transition processes in strongly-correlated systems, while further inspiring the development of new device functionalities.
△ Less
Submitted 28 December, 2023;
originally announced December 2023.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Reputation-based synergy and discounting mechanism promotes cooperation
Authors:
Wenqiang Zhu,
Xin Wang,
Chaoqian Wang,
Longzhao Liu,
Hongwei Zheng,
Shaoting Tang
Abstract:
A good group reputation often facilitates more efficient synergistic teamwork in production activities. Here we translate this simple motivation into a reputation-based synergy and discounting mechanism in the public goods game. Specifically, the reputation type of a group, either good or bad determined by a reputation threshold, modifies the nonlinear payoff structure described by a unified reput…
▽ More
A good group reputation often facilitates more efficient synergistic teamwork in production activities. Here we translate this simple motivation into a reputation-based synergy and discounting mechanism in the public goods game. Specifically, the reputation type of a group, either good or bad determined by a reputation threshold, modifies the nonlinear payoff structure described by a unified reputation impact factor. Results show that this reputation-based incentive mechanism could effectively promote cooperation compared with linear payoffs, despite the coexistence of synergy and discounting effects. Notably, the complicated interactions between reputation impact and reputation threshold result in a sharp phase transition from full cooperation to full defection. We also find that the presence of a few discounting groups could increase the average payoffs of cooperators, leading to an interesting phenomenon that when the reputation threshold is raised, the gap between the average payoffs of cooperations and defectors increases while the overall payoff decreases. Our work provides important insights into facilitating cooperation in social groups.
△ Less
Submitted 5 November, 2023; v1 submitted 23 October, 2023;
originally announced October 2023.
-
Indirect reciprocity with assessments of group reputation
Authors:
Ming Wei,
Xin Wang,
Longzhao Liu,
Hongwei Zheng,
Yishen Jiang,
Ya**g Hao,
Zhiming Zheng,
Shaoting Tang
Abstract:
Indirect reciprocity unveils how social cooperation is founded upon moral systems. Under the frame of dyadic games based on individual reputations, the "leading-eight" social norms distinguish themselves in promoting and sustaining cooperation. However, in real societies, people constantly interact within larger groups. They are assessed not only by their own behaviors, but also the reputations of…
▽ More
Indirect reciprocity unveils how social cooperation is founded upon moral systems. Under the frame of dyadic games based on individual reputations, the "leading-eight" social norms distinguish themselves in promoting and sustaining cooperation. However, in real societies, people constantly interact within larger groups. They are assessed not only by their own behaviors, but also the reputations of the groups they come from and interact with. Here, we study indirect reciprocity in public goods games with group reputations. We show that varying criteria of group reputation assessment destabilize the consensus within leading-eight populations. We find the presence of an optimal, moderately set social assessment criterion that is most conductive to promoting cooperation. As the payoff of group cooperation increases, the assessment criterion evolves to relaxation following two dynamical patterns, indicating that social prosperity encourages people to be tolerate. Our work identifies the role of group reputation assessment to boost cooperation in social populations.
△ Less
Submitted 14 October, 2023;
originally announced October 2023.
-
Orthogonal Spatial Coding with Stimulated Parametric Down-Conversion
Authors:
Yang Xu,
Sirui Tang,
A. Nicholas Black,
Robert W. Boyd
Abstract:
Orthogonal optical coding is widely used in classical multiuser communication networks. Using the phase conjugation property of stimulated parametric down-conversion, we extend the current orthogonal optical coding scheme to the spatial domain to encode and decode image information. In this process, the idler beam inherits the complex conjugate of the field information encoded in the seed beam. An…
▽ More
Orthogonal optical coding is widely used in classical multiuser communication networks. Using the phase conjugation property of stimulated parametric down-conversion, we extend the current orthogonal optical coding scheme to the spatial domain to encode and decode image information. In this process, the idler beam inherits the complex conjugate of the field information encoded in the seed beam. An encoding phase mask introduced to the input seed beam blurs the image transferred to the idler. The original image is restored by passing the coded transferred image through a corrective phase mask placed in the momentum space of the idler beam. We expect that this scheme can also inspire new techniques in aberration cancellation and frequency conversion imaging.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Towards Predicting Equilibrium Distributions for Molecular Systems with Deep Learning
Authors:
Shuxin Zheng,
Jiyan He,
Chang Liu,
Yu Shi,
Ziheng Lu,
Weitao Feng,
Fusong Ju,
Jiaxi Wang,
Jianwei Zhu,
Yaosen Min,
He Zhang,
Shidi Tang,
Hongxia Hao,
Peiran **,
Chi Chen,
Frank Noé,
Haiguang Liu,
Tie-Yan Liu
Abstract:
Advances in deep learning have greatly improved structure prediction of molecules. However, many macroscopic observations that are important for real-world applications are not functions of a single molecular structure, but rather determined from the equilibrium distribution of structures. Traditional methods for obtaining these distributions, such as molecular dynamics simulation, are computation…
▽ More
Advances in deep learning have greatly improved structure prediction of molecules. However, many macroscopic observations that are important for real-world applications are not functions of a single molecular structure, but rather determined from the equilibrium distribution of structures. Traditional methods for obtaining these distributions, such as molecular dynamics simulation, are computationally expensive and often intractable. In this paper, we introduce a novel deep learning framework, called Distributional Graphormer (DiG), in an attempt to predict the equilibrium distribution of molecular systems. Inspired by the annealing process in thermodynamics, DiG employs deep neural networks to transform a simple distribution towards the equilibrium distribution, conditioned on a descriptor of a molecular system, such as a chemical graph or a protein sequence. This framework enables efficient generation of diverse conformations and provides estimations of state densities. We demonstrate the performance of DiG on several molecular tasks, including protein conformation sampling, ligand structure sampling, catalyst-adsorbate sampling, and property-guided structure generation. DiG presents a significant advancement in methodology for statistically understanding molecular systems, opening up new research opportunities in molecular science.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Single-particle vibrational spectroscopy using optical microresonators
Authors:
Shui-**g Tang,
Mingjie Zhang,
Jialve Sun,
Jia-Wei Meng,
Xiao Xiong,
Qihuang Gong,
Dayong **,
Qi-Fan Yang,
Yun-Feng Xiao
Abstract:
Vibrational spectroscopy is a ubiquitous technology that derives the species, constituents, and morphology of an object from its natural vibrations. However, the vibrational spectra of mesoscopic particles - including most biological cells - have remained hidden from existing technologies. These particles are expected to vibrate faintly at megahertz to gigahertz rates, imposing unpractical sensiti…
▽ More
Vibrational spectroscopy is a ubiquitous technology that derives the species, constituents, and morphology of an object from its natural vibrations. However, the vibrational spectra of mesoscopic particles - including most biological cells - have remained hidden from existing technologies. These particles are expected to vibrate faintly at megahertz to gigahertz rates, imposing unpractical sensitivity and resolution for current optical and piezoelectric spectroscopy. Here we demonstrate the real-time measurement of natural vibrations of single mesoscopic particles using an optical microresonator, extending the reach of vibrational spectroscopy to a new spectral window. Conceptually, a spectrum of vibrational modes of the particles is stimulated photoacoustically, and correlated to a high-quality-factor optical resonance for the ultrasensitive readout. Experimentally, this scheme is testified by measuring mesoscopic particles with different constituents, sizes, and internal structures, showing an unprecedented signal-to-noise ratio of 50 dB and detection bandwidth over 1 GHz. This new technology is further applied for the biomechanical fingerprinting of single microbial cells with different species and living states. The present method opens up new avenues to study single-particle mechanical properties in vibrational degrees of freedom, and may find applications in photoacoustic sensing and imaging, cavity optomechanics and biomechanics.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
Simulations of laser-driven strong-field QED with Ptarmigan: Resolving wavelength-scale interference and $γ$-ray polarization
Authors:
T. G. Blackburn,
B. King,
S. Tang
Abstract:
Accurate modelling is necessary to support precision experiments investigating strong-field QED phenomena. This modelling is particularly challenging in the transition between the perturbative and nonperturbative regimes, where the normalized laser amplitude $a_0$ is comparable to unity and wavelength-scale interference is significant. Here we describe how to simulate nonlinear Compton scattering,…
▽ More
Accurate modelling is necessary to support precision experiments investigating strong-field QED phenomena. This modelling is particularly challenging in the transition between the perturbative and nonperturbative regimes, where the normalized laser amplitude $a_0$ is comparable to unity and wavelength-scale interference is significant. Here we describe how to simulate nonlinear Compton scattering, Breit-Wheeler pair creation, and trident pair creation in this regime, using the Monte Carlo particle-tracking code Ptarmigan. This code simulates collisions between high-intensity lasers and beams of electrons or $γ$ rays, primarily in the framework of the locally monochromatic approximation (LMA). We benchmark our simulation results against full QED calculations for pulsed plane waves and show that they are accurate at the level of a few per cent, across the full range of particle energies and laser intensities. This work extends our previous results to linearly polarized lasers and arbitrarily polarized $γ$ rays.
△ Less
Submitted 5 September, 2023; v1 submitted 22 May, 2023;
originally announced May 2023.
-
Self-passivated freestanding superconducting oxide film for flexible electronics
Authors:
Zhuoyue Jia,
Chi Sin Tang,
**g Wu,
Changjian Li,
Wanting Xu,
Kairong Wu,
Difan Zhou,
** Yang,
Shengwei Zeng,
Zhigang Zeng,
Dengsong Zhang,
Ariando Ariando,
Mark B. H. Breese,
Chuanbing Cai,
Xinmao Yin
Abstract:
The integration of high-temperature superconducting YBa2Cu3O6+x (YBCO) into flexible electronic devices has the potential to revolutionize the technology industry. The effective preparation of high-quality flexible YBCO films therefore plays a key role in this development. We present a novel approach for transferring water-sensitive YBCO films onto flexible substrates without any buffer layer. Fre…
▽ More
The integration of high-temperature superconducting YBa2Cu3O6+x (YBCO) into flexible electronic devices has the potential to revolutionize the technology industry. The effective preparation of high-quality flexible YBCO films therefore plays a key role in this development. We present a novel approach for transferring water-sensitive YBCO films onto flexible substrates without any buffer layer. Freestanding YBCO film on a polydimethylsiloxane substrate is extracted by etching the Sr3Al2O6 sacrificial layer from the LaAlO3 substrate. In addition to the obtained freestanding YBCO thin film having a Tc of 89.1 K, the freestanding YBCO thin films under inward and outward bending conditions have Tc of 89.6 K and 88.9 K, respectively. A comprehensive characterization involving multiple experimental techniques including high-resolution transmission electron microscopy, scanning electron microscopy, Raman and X-ray Absorption Spectroscopy is conducted to investigate the morphology, structural and electronic properties of the YBCO film before and after the extraction process where it shows the preservation of the structural and superconductive properties of the freestanding YBCO virtually in its pristine state. Further investigation reveals the formation of a YBCO passivated layer serves as a protective layer which effectively preserves the inner section of the freestanding YBCO during the etching process. This work plays a key role in actualizing the fabrication of flexible oxide thin films and opens up new possibilities for a diverse range of device applications involving thin-films and low-dimensional materials.
△ Less
Submitted 6 July, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Black holes as the source of dark energy: a stringent test with high-redshift JWST AGNs
Authors:
Lei Lei,
Lei Zu,
Guan-Wen Yuan,
Zhao-Qiang Shen,
Yi-Ying Wang,
Yuan-Zhu Wang,
Zhen-Bo Su,
Wen-ke Ren,
Shao-Peng Tang,
Hao Zhou,
Chi Zhang,
Zhi-** **,
Lei Feng,
Yi-Zhong Fan,
Da-Ming Wei
Abstract:
Studies have proposed that there is evidence for cosmological coupling of black holes (BHs) with an index of $k\approx 3$; hence, BHs serve as the astrophysical source of dark energy. However, the data sample is limited for the redshifts of $\leq 2.5$. In recent years, the James Webb Space Telescope (JWST) has detected many high-redshift active galactic nuclei (AGNs) and quasars. Among the JWST NI…
▽ More
Studies have proposed that there is evidence for cosmological coupling of black holes (BHs) with an index of $k\approx 3$; hence, BHs serve as the astrophysical source of dark energy. However, the data sample is limited for the redshifts of $\leq 2.5$. In recent years, the James Webb Space Telescope (JWST) has detected many high-redshift active galactic nuclei (AGNs) and quasars. Among the JWST NIRSpec-/NIRCam-resolved AGNs, three are determined to be in early-type host galaxies with a redshift of $z\sim 4.5--7$. However, their $M_{\star}$ and $M_{\rm BH}$ are in tension with the predicted cosmological coupling of black holes with $k = 3$ at a confidence level of $\sim 2σ$, which challenges the hypothesis that BHs serve as the origin of dark energy. Future work on high-redshift AGNs using the JWST will further assess such a hypothesis by identifying more early-type host galaxies in the higher mass range.
△ Less
Submitted 17 January, 2024; v1 submitted 5 May, 2023;
originally announced May 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
The New Small Wheel electronics
Authors:
G. Iakovidis,
L. Levinson,
Y. Afik,
C. Alexa,
T. Alexopoulos,
J. Ameel,
D. Amidei,
D. Antrim,
A. Badea,
C. Bakalis,
H. Boterenbrood,
R. S. Brener,
S. Chan,
J. Chapman,
G. Chatzianastasiou,
H. Chen,
M. C. Chu,
R. M. Coliban,
T. Costa de Paiva,
G. de Geronimo,
R. Edgar,
N. Felt,
S. Francescato,
M. Franklin,
T. Geralis
, et al. (77 additional authors not shown)
Abstract:
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector te…
▽ More
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the "small" Thin Gap Chambers, with a total of 2.45 Million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm$^{2}$ at the expected HL-LHC luminosity of $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$. The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented.
△ Less
Submitted 25 May, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Phase-transition microcavity laser
Authors:
Xi Yang,
Shui-**g Tang,
Jia-Wei Meng,
Pei-Ji Zhang,
You-Ling Chen,
Yun-Feng Xiao
Abstract:
Liquid-crystal microcavity lasers have attracted considerable attention because of their extraordinary tunability and sensitive response to external stimuli, and they operate generally within a specific phase. Here, we demonstrate a liquid-crystal microcavity laser operated in the phase transition, in which the reorientation of liquid-crystal molecules occurs from aligned to disordered states. A s…
▽ More
Liquid-crystal microcavity lasers have attracted considerable attention because of their extraordinary tunability and sensitive response to external stimuli, and they operate generally within a specific phase. Here, we demonstrate a liquid-crystal microcavity laser operated in the phase transition, in which the reorientation of liquid-crystal molecules occurs from aligned to disordered states. A significant wavelength shift of the microlaser is observed, resulting from the dramatic changes in the refractive index of liquid-crystal microdroplets during the phase transition. This phase-transition microcavity laser is then exploited for sensitive thermal sensing, enabling two-order-of-magnitude enhancement in sensitivity compared with the nematic-phase microlaser operated far from the transition point. Experimentally, we demonstrate an exceptional sensitivity of -40 nm/K and an ultrahigh resolution of 320 uK. The phase-transition microcavity laser features compactness, softness, and tunability, showing great potential for high-performance sensors, optical modulators, and soft matter photonics.
△ Less
Submitted 17 March, 2023; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Van der Waals device integration beyond the limits of van der Waals forces via adhesive matrix transfer
Authors:
Peter F. Satterthwaite,
Weikun Zhu,
Patricia Jastrzebska-Perfect,
Melbourne Tang,
Hongze Gao,
Hikari Kitadai,
Ang-Yu Lu,
Qishuo Tan,
Shin-Yi Tang,
Yu-Lun Chueh,
Chia-Nung Kuo,
Chin Shan Lue,
**g Kong,
Xi Ling,
Farnaz Niroui
Abstract:
Pristine van der Waals (vdW) interfaces between two-dimensional (2D) and other materials are core to emerging optical and electronic devices. Their direct fabrication is, however, challenged as the vdW forces are weak and cannot be tuned to accommodate integration of arbitrary layers without solvents, sacrificial-layers or high-temperatures, steps that can introduce damage. To address these limita…
▽ More
Pristine van der Waals (vdW) interfaces between two-dimensional (2D) and other materials are core to emerging optical and electronic devices. Their direct fabrication is, however, challenged as the vdW forces are weak and cannot be tuned to accommodate integration of arbitrary layers without solvents, sacrificial-layers or high-temperatures, steps that can introduce damage. To address these limitations, we introduce a single-step 2D material-to-device integration approach in which forces promoting transfer are decoupled from the vdW forces at the interface of interest. We use this adhesive matrix transfer to demonstrate conventionally-forbidden direct integration of diverse 2D materials (MoS2, WSe2, PtS2, GaS) with dielectrics (SiO2, Al2O3), and scalable, aligned heterostructure formation, both foundational to device development. We then demonstrate a single-step integration of monolayer-MoS2 into arrays of transistors. With no exposure to polymers or solvents, clean interfaces and pristine surfaces are preserved, which can be further engineered to demonstrate both n- and p-type behavior. Beyond serving as a platform to probe the intrinsic properties of sensitive nanomaterials without the influence of processing steps, our technique allows efficient formation of unconventional device form-factors, with an example of flexible transistors demonstrated.
△ Less
Submitted 12 February, 2023;
originally announced February 2023.
-
A study of simulating Raman spectra for alkanes with a machine learning-based polarizability model
Authors:
Mandi Fang,
Shi Tang,
Zheyong Fan,
Yao Shi,
Nan Xu,
Yi He
Abstract:
Polarizability is closely related to many fundamental characteristics of molecular systems and plays an indispensable role in simulating the Raman spectra. However, the calculations of polarizability for large systems still suffers from the limitations of processing ability of the quantum mechanical (QM) methods. This work assessed and compared the accuracy of the bond polarizability model (BPM) a…
▽ More
Polarizability is closely related to many fundamental characteristics of molecular systems and plays an indispensable role in simulating the Raman spectra. However, the calculations of polarizability for large systems still suffers from the limitations of processing ability of the quantum mechanical (QM) methods. This work assessed and compared the accuracy of the bond polarizability model (BPM) and a ML-based atomic polarizability model (AlphaML) in predicting polarizability of alkanes and then also investigated the ability of simulating Raman spectra. We found that the AlphaML has appreciable advantages over the BPM in learning the polarizability in the training data set and predicting polarizability of molecules that configurational differently from training structures. In addition, the BPM has inherent disadvantages in predicting polarizability anisotropy due to many factors including large uncertainties of estimating bond anisotropy, omitting of off-diagonal parameters in the construction of the model. As a result, the BPM has larger errors than the AlphaML in the simulation of anisotropic Raman scattering. Finally, we demonstrated that both the BPM and AlphaML suffer from transference to alkanes larger than those used in the training data sets, but the problem for the AlphaML can be circumvented by exploring more proper training structures.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
Probabilistic activity driven model of temporal simplicial networks and its application on higher-order dynamics
Authors:
Zhihao Han,
Longzhao Liu,
Xin Wang,
Ya**g Hao,
Hongwei Zheng,
Shaoting Tang,
Zhiming Zheng
Abstract:
Network modeling characterizes the underlying principles of structural properties and is of vital significance for simulating dynamical processes in real world. However, bridging structure and dynamics is always challenging due to the multiple complexities in real systems. Here, through introducing the individual's activity rate and the possibility of group interaction, we propose a probabilistic…
▽ More
Network modeling characterizes the underlying principles of structural properties and is of vital significance for simulating dynamical processes in real world. However, bridging structure and dynamics is always challenging due to the multiple complexities in real systems. Here, through introducing the individual's activity rate and the possibility of group interaction, we propose a probabilistic activity driven (PAD) model that could generate temporal higher-order networks with both power-law and high-clustering characteristics, which successfully links the two most critical structural features and a basic dynamical pattern in extensive complex systems. Surprisingly, the power-law exponents and the clustering coefficients of the aggregated PAD network could be tuned in a wide range by altering a set of model parameters. We further provide an approximation algorithm to select the proper parameters that can generate networks with given structural properties, the effectiveness of which is verified by fitting various real-world networks. Lastly, we explore the co-evolution of PAD model and higher-order contagion dynamics, and analytically derive the critical conditions for phase transition and bistable phenomenon. Our model provides a basic tool to reproduce complex structural properties and to study the widespread higher-order dynamics, which has great potential for applications across fields.
△ Less
Submitted 26 December, 2022;
originally announced December 2022.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Nonlinear eco-evolutionary games with global environmental fluctuations and local environmental feedbacks
Authors:
Yishen Jiang,
Xin Wang,
Longzhao Liu,
Ming Wei,
**gwu Zhao,
Zhiming Zheng,
Shaoting Tang
Abstract:
Environmental changes play a critical role in determining the evolution of social dilemmas in many natural or social systems. Generally, the environmental changes include two prominent aspects: the global time-dependent fluctuations and the local strategy-dependent feedbacks. However, the impacts of these two types of environmental changes have only been studied separately, a complete picture of t…
▽ More
Environmental changes play a critical role in determining the evolution of social dilemmas in many natural or social systems. Generally, the environmental changes include two prominent aspects: the global time-dependent fluctuations and the local strategy-dependent feedbacks. However, the impacts of these two types of environmental changes have only been studied separately, a complete picture of the environmental effects exerted by the combination of these two aspects remains unclear. Here we develop a theoretical framework that integrates group strategic behaviors with their general dynamic environments, where the global environmental fluctuations are associated with a nonlinear factor in public goods game and the local environmental feedbacks are described by the `eco-evolutionary game'. We show how the coupled dynamics of local game-environment evolution differs in static and dynamic global environments. In particular, we find the emergence of cyclic evolutions of group cooperation and local environment, which forms an interior irregular loop in the phase plane, depending on the relative changing speed of both global and local environments compared to the strategic change. Our results provide important insights toward how diverse evolutionary outcomes could emerge from the nonlinear interactions between strategies and the changing environments.
△ Less
Submitted 13 December, 2022;
originally announced December 2022.
-
Ensemble reweighting using Cryo-EM particles
Authors:
Wai Shing Tang,
David Silva-Sánchez,
Julian Giraldo-Barreto,
Bob Carpenter,
Sonya Hanson,
Alex H. Barnett,
Erik H. Thiede,
Pilar Cossio
Abstract:
Cryo-electron microscopy (cryo-EM) has recently become a premier method for obtaining high-resolution structures of biological macromolecules. However, it is limited to biomolecular samples with low conformational heterogeneity, where all the conformations can be well-sampled at many projection angles. While cryo-EM technically provides single-molecule data for heterogeneous molecules, most existi…
▽ More
Cryo-electron microscopy (cryo-EM) has recently become a premier method for obtaining high-resolution structures of biological macromolecules. However, it is limited to biomolecular samples with low conformational heterogeneity, where all the conformations can be well-sampled at many projection angles. While cryo-EM technically provides single-molecule data for heterogeneous molecules, most existing reconstruction tools cannot extract the full distribution of possible molecular configurations. To overcome these limitations, we build on a prior Bayesian approach and develop an ensemble refinement framework that estimates the ensemble density from a set of cryo-EM particles by reweighting a prior ensemble of conformations, e.g., from molecular dynamics simulations or structure prediction tools. Our work is a general approach to recovering the equilibrium probability density of the biomolecule directly in conformational space from single-molecule data. To validate the framework, we study the extraction of state populations and free energies for a simple toy model and from synthetic cryo-EM images of a simulated protein that explores multiple folded and unfolded conformations.
△ Less
Submitted 10 December, 2022;
originally announced December 2022.
-
An Edge Alignment-based Orientation Selection Method for Neutron Tomography
Authors:
Diyu Yang,
Shimin Tang,
Singanallur V. Venkatakrishnan,
Mohammad S. N. Chowdhury,
Yuxuan Zhang,
Hassina Z. Bilheux,
Gregery T. Buzzard,
Charles A. Bouman
Abstract:
Neutron computed tomography (nCT) is a 3D characterization technique used to image the internal morphology or chemical composition of samples in biology and materials sciences. A typical workflow involves placing the sample in the path of a neutron beam, acquiring projection data at a predefined set of orientations, and processing the resulting data using an analytic reconstruction algorithm. Typi…
▽ More
Neutron computed tomography (nCT) is a 3D characterization technique used to image the internal morphology or chemical composition of samples in biology and materials sciences. A typical workflow involves placing the sample in the path of a neutron beam, acquiring projection data at a predefined set of orientations, and processing the resulting data using an analytic reconstruction algorithm. Typical nCT scans require hours to days to complete and are then processed using conventional filtered back-projection (FBP), which performs poorly with sparse views or noisy data. Hence, the main methods in order to reduce overall acquisition time are the use of an improved sampling strategy combined with the use of advanced reconstruction methods such as model-based iterative reconstruction (MBIR). In this paper, we propose an adaptive orientation selection method in which an MBIR reconstruction on previously-acquired measurements is used to define an objective function on orientations that balances a data-fitting term promoting edge alignment and a regularization term promoting orientation diversity. Using simulated and experimental data, we demonstrate that our method produces high-quality reconstructions using significantly fewer total measurements than the conventional approach.
△ Less
Submitted 8 March, 2023; v1 submitted 1 December, 2022;
originally announced December 2022.
-
Locally monochromatic two-step nonlinear trident process in a plane wave
Authors:
S. Tang,
B. King
Abstract:
In many-cycle plane waves at intermediate intensities, the nonlinear trident process can be well-approximated by the two sequential steps of nonlinear Compton scattering of a polarised real photon followed by its transformation into an electron-positron pair via nonlinear Breit-Wheeler pair creation. We investigate this two-step process in the intermediate intensity regime by employing the locally…
▽ More
In many-cycle plane waves at intermediate intensities, the nonlinear trident process can be well-approximated by the two sequential steps of nonlinear Compton scattering of a polarised real photon followed by its transformation into an electron-positron pair via nonlinear Breit-Wheeler pair creation. We investigate this two-step process in the intermediate intensity regime by employing the locally monochromatic approximation for each step and numerically evaluating resulting expressions. When photon polarisation is included, it is found to produce an order 10% decrease in the trident rate: the importance of polarisation increases at lower intensities, and decreases at higher intensities. Its importance persists at higher intensities in a linearly-polarised background, but disappears at high intensities in a circularly-polarised background. If the two steps are made to take place in two linearly-polarised plane wave pulses with perpendicular polarisations, the pair yield can be increased by approximately 30% compared to two plane waves with the same polarisation. It is also shown that harmonic structures in the Compton step can be passed to the pair step if the Compton edge is at an energy of the order of the threshold for linear Breit-Wheeler.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Electric field enhancement of pool boiling of dielectric fluids on pillar-structured surfaces: A lattice Boltzmann study
Authors:
Wanxin Li,
Qing Li,
Yue Yu,
Shi Tang
Abstract:
In this paper, by using a phase-change lattice Boltzmann (LB) model coupled with an electric field model, we numerically investigate the performance and enhancement mechanism of pool boiling of dielectric fluids on pillar-structured surfaces under an electric field. The numerical investigation reveals that applying an electric field causes both positive and negative influences on the pool boiling…
▽ More
In this paper, by using a phase-change lattice Boltzmann (LB) model coupled with an electric field model, we numerically investigate the performance and enhancement mechanism of pool boiling of dielectric fluids on pillar-structured surfaces under an electric field. The numerical investigation reveals that applying an electric field causes both positive and negative influences on the pool boiling of dielectric fluids on pillar-structured surfaces. It is found that, under the action of an electric field, the electric force prevents the bubbles nucleated in the channels from crossing the edges of the pillar tops. On the one hand, such an effect results in the bubble coalescence in the channels and blocks the paths of liquid supply for the channels, which leads to the deterioration of pool boiling in the medium-superheat regime. On the other hand, it prevents the coalescence between the bubbles in the channels and those on the pillar tops, which suppresses the formation of a continuous vapor film and therefore delays the occurrence of boiling crisis. Meanwhile, the electric force can promote the departure of the bubbles on the pillar tops. Accordingly, the critical heat flux (CHF) can be improved. Based on the revealed mechanism, wettability-modified regions are applied to the pillar tops for further enhancing the boiling heat transfer. It is shown that the boiling performance on pillar-structured surfaces can be enhanced synergistically with the CHF being increased by imposing an electric field and the maximum heat transfer coefficient being improved by applying mixed wettability to the pillar-structured surfaces.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Reduced Order Model for Chemical Kinetics: A case study with Primordial Chemical Network
Authors:
Kwok Sun Tang,
Matthew Turk
Abstract:
Chemical kinetics plays an important role in governing the thermal evolution in reactive flows problems. The possible interactions between chemical species increase drastically with the number of species considered in the system. Various ways have been proposed before to simplify chemical networks with an aim to reduce the computational complexity of the chemical network. These techniques oftentim…
▽ More
Chemical kinetics plays an important role in governing the thermal evolution in reactive flows problems. The possible interactions between chemical species increase drastically with the number of species considered in the system. Various ways have been proposed before to simplify chemical networks with an aim to reduce the computational complexity of the chemical network. These techniques oftentimes require domain-knowledge experts to handcraftedly identify important reaction pathways and possible simplifications. Here, we propose a combination of autoencoder and neural ordinary differential equation to model the temporal evolution of chemical kinetics in a reduced subspace. We demonstrated that our model has achieved a close-to 10-fold speed-up compared to commonly used astro-chemistry solver for a 9-species primordial network, while maintaining 1 percent accuracy across a wide-range of density and temperature.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
First report of a solar energetic particle event observed by China's Tianwen-1 mission in transit to Mars
Authors:
Shuai Fu,
Zheyi Ding,
Yongjie Zhang,
** Zhang,
Cunhui Li,
Gang Li,
Shuwen Tang,
Haiyan Zhang,
Yi Xu,
Yuming Wang,
**gnan Guo,
Lingling Zhao,
Yi Wang,
Xiangyu Hu,
Pengwei Luo,
Zhiyu Sun,
Yuhong Yu,
Lianghai Xie
Abstract:
Solar energetic particles (SEPs) associated with flares and/or coronal mass ejection (CME)-driven shocks can impose acute radiation hazards to space explorations. To measure energetic particles in near-Mars space, the Mars Energetic Particle Analyzer (MEPA) instrument onboard China's Tianwen-1 (TW-1) mission was designed. Here, we report the first MEPA measurements of the widespread SEP event occu…
▽ More
Solar energetic particles (SEPs) associated with flares and/or coronal mass ejection (CME)-driven shocks can impose acute radiation hazards to space explorations. To measure energetic particles in near-Mars space, the Mars Energetic Particle Analyzer (MEPA) instrument onboard China's Tianwen-1 (TW-1) mission was designed. Here, we report the first MEPA measurements of the widespread SEP event occurring on 29 November 2020 when TW-1 was in transit to Mars. This event occurred when TW-1 and Earth were magnetically well connected, known as the Hohmann-Parker effect, thus offering a rare opportunity to understand the underlying particle acceleration and transport process. Measurements from TW-1 and near-Earth spacecraft show similar double-power-law spectra and a radial dependence of the SEP peak intensities. Moreover, the decay phases of the time-intensity profiles at different locations clearly show the reservoir effect. We conclude that the double-power-law spectrum is likely generated at the acceleration site, and that a small but finite cross-field diffusion is crucial to understand the formation of the SEP reservoir phenomenon. These results provide insight into particle acceleration and transport associated with CME-driven shocks, which may contribute to the improvement of relevant physical models.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Enhanced brain structure-function tethering in transmodal cortex revealed by high-frequency eigenmodes
Authors:
Yaqian Yang,
Zhiming Zheng,
Longzhao Liu,
Hongwei Zheng,
Yi Zhen,
Yi Zheng,
Xin Wang,
Shaoting Tang
Abstract:
The brain's structural connectome supports signal propagation between neuronal elements, sha** diverse coactivation patterns that can be captured as functional connectivity. While the link between structure and function remains an ongoing challenge, the prevailing hypothesis is that the structure-function relationship may itself be gradually decoupled along a macroscale functional gradient spann…
▽ More
The brain's structural connectome supports signal propagation between neuronal elements, sha** diverse coactivation patterns that can be captured as functional connectivity. While the link between structure and function remains an ongoing challenge, the prevailing hypothesis is that the structure-function relationship may itself be gradually decoupled along a macroscale functional gradient spanning unimodal to transmodal regions. However, this hypothesis is strongly constrained by the underlying models which may neglect requisite signaling mechanisms. Here, we transform the structural connectome into a set of orthogonal eigenmodes governing frequency-specific diffusion patterns and show that regional structure-function relationships vary markedly under different signaling mechanisms. Specifically, low-frequency eigenmodes, which are considered sufficient to capture the essence of the functional network, contribute little to functional connectivity reconstruction in transmodal regions, resulting in structure-function decoupling along the unimodal-transmodal gradient. In contrast, high-frequency eigenmodes, which are usually on the periphery of attention due to their association with noisy and random dynamical patterns, contribute significantly to functional connectivity prediction in transmodal regions, inducing gradually convergent structure-function relationships from unimodal to transmodal regions. Although the information in high-frequency eigenmodes is weak and scattered, it effectively enhances the structure-function correspondence by 35% in unimodal regions and 56% in transmodal regions. Altogether, our findings suggest that the structure-function divergence in transmodal areas may not be an intrinsic property of brain organization, but can be narrowed through multiplexed and regionally specialized signaling mechanisms.
△ Less
Submitted 7 July, 2022;
originally announced July 2022.
-
Sub-monolayer Biolasers: Lower Gain, Higher Sensitivity
Authors:
C. Gong,
X. Yang,
S. J. Tang,
Q. Q. Zhang,
Y. Wang,
Y. L. Liu,
Y. C. Chen,
G. D. Peng,
X. Fan,
Y. F. Xiao,
Y. J. Rao,
Y. Gong
Abstract:
Biomarker detection is the key to identifying health risks. However, designing sensitive biosensors in a single-use mode for disease diagnosis remains a major challenge. Here, we report sub-monolayer biolasers with remarkable repeatability for ultrasensitive and disposable biomarker detection. The biolaser sensors are designed by employing the telecom optical fibers as distributed optical microcav…
▽ More
Biomarker detection is the key to identifying health risks. However, designing sensitive biosensors in a single-use mode for disease diagnosis remains a major challenge. Here, we report sub-monolayer biolasers with remarkable repeatability for ultrasensitive and disposable biomarker detection. The biolaser sensors are designed by employing the telecom optical fibers as distributed optical microcavities and pushing the gain molecules down to the sub-monolayer level. We observe a status transition from the monolayer biolaser to the sub-monolayer biolaser by tuning the specific conjugation. By reducing the fluorophores down to the threshold density (~ 3.2 x 10-13 mol/cm2), we demonstrate an ultimate sensitivity of sub-monolayer biolaser with six orders of magnitude enhancement compared with the monolayer biolasers. We further achieved ultrasensitive immunoassay for Parkinson's disease biomarker, alpha-synuclein, with a lower limit of detection of 0.32 pM in serum. This biosensor with massive fabrication capability at ultralow cost provides a general method for the ultrasensitive disposable biodetection of disease biomarkers.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
B. Ali-Mohammadzadeh,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo
, et al. (1203 additional authors not shown)
Abstract:
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char…
▽ More
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation.
△ Less
Submitted 17 July, 2023; v1 submitted 29 June, 2022;
originally announced June 2022.
-
Functional acoustic metamaterial using shortcut to adiabatic passage in acoustic waveguide couplers
Authors:
Shuai Tang,
**-Lei Wu,
Cheng Lü,
Jie Song,
Yongyuan Jiang
Abstract:
Shortcut to adiabatic passage (STAP), initially proposed to accelerate adiabatic quantum state transfer, has been widely explored and applied in quantum optics and integrated optics. Here we bring STAP into the field of acoustics to design compact couplers and functional metamaterial. The space-varying coupling strengths of acoustic waveguides (WGs) are tailored by means of dressed states in a thr…
▽ More
Shortcut to adiabatic passage (STAP), initially proposed to accelerate adiabatic quantum state transfer, has been widely explored and applied in quantum optics and integrated optics. Here we bring STAP into the field of acoustics to design compact couplers and functional metamaterial. The space-varying coupling strengths of acoustic waveguides (WGs) are tailored by means of dressed states in a three-level system, accounting for the desirable acoustic energy transfer among three WGs with short length. We show that the acoustic coupler has one-way feature when loss is introduced into the intermediate WG. More uniquely, when the propagation of acoustic wave is designed to mimic a Hadamard transformation, an acoustic metamaterial can be constructed by arraying several couplers, possessing the beam-splitting function and unidirectional, broadband performances. Our work bridges STAP and the acoustic coupler as well as metamaterial, which may have profound impacts on exploring quantum technologies for promoting advanced acoustic devices.
△ Less
Submitted 3 June, 2022;
originally announced June 2022.
-
Collective Behavior of Crowded Drops in Microfluidic Systems
Authors:
Ya Gai,
Andrea Montessori,
Sauro Succi,
Sindy K. Y. Tang
Abstract:
Droplet microfluidics, in which micro-droplets serve as individual reactors, has enabled a wide range of high-throughput biochemical processes. Unlike solid wells typically used in current biochemical assays, droplets are subject to instability and can undergo breakup, especially under fast flow conditions. Although the physics of single drops has been studied extensively, the flow of crowded drop…
▽ More
Droplet microfluidics, in which micro-droplets serve as individual reactors, has enabled a wide range of high-throughput biochemical processes. Unlike solid wells typically used in current biochemical assays, droplets are subject to instability and can undergo breakup, especially under fast flow conditions. Although the physics of single drops has been studied extensively, the flow of crowded drops or concentrated emulsions, where droplet volume fraction exceeds 80 percent, is relatively unexplored in microfluidics. In this article and the related invited lecture from the 74th Annual Meeting of the American Physical Society's Division of Fluid Dynamics, we describe the collective behavior of drops in a concentrated emulsion by tracking the dynamics and the fate of individual drops within the emulsion. At the slow flow limit of the concentrated emulsion, we observe an unexpected order, where the velocity of individual drops in the emulsion exhibits spatiotemporal periodicity. As the flow rate increases, the emulsion transitions from a solid-like to a liquid-like material, and the spatiotemporal order in the flow is lost. At the fast flow limit, droplet breakup starts to occur. We show that droplet breakup within the emulsion follows a probability distribution, in stark contrast to the deterministic behavior in classical single-drop studies. In addition to capillary number and viscosity ratio, break-up probability is governed by a confinement factor that measures drop size relative to a characteristic channel length. The breakup probability arises from the time-varying packing configuration of the drops. Finally, we discuss recent progress in computation methods for recapitulating the flow of concentrated emulsions.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1204 additional authors not shown)
Abstract:
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det…
▽ More
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation.
△ Less
Submitted 30 June, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters
Authors:
G. Aad,
A. V. Akimov,
K. Al Khoury,
M. Aleksa,
T. Andeen,
C. Anelli,
N. Aranzabal,
C. Armijo,
A. Bagulia,
J. Ban,
T. Barillari,
F. Bellachia,
M. Benoit,
F. Bernon,
A. Berthold,
H. Bervas,
D. Besin,
A. Betti,
Y. Bianga,
M. Biaut,
D. Boline,
J. Boudreau,
T. Bouedo,
N. Braam,
M. Cano Bret
, et al. (173 additional authors not shown)
Abstract:
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Cons…
▽ More
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system.
△ Less
Submitted 16 May, 2022; v1 submitted 15 February, 2022;
originally announced February 2022.
-
Monolithic Kerr and electro-optic hybrid microcombs
Authors:
Zheng Gong,
Mohan Shen,
Juanjuan Lu,
Joshua B,
Surya Hong X. Tang
Abstract:
Advances in microresonator-based soliton generation promise chip-scale integration of optical frequency comb for applications spanning from time kee** to frequency synthesis. Miniaturized cavities harness Kerr nonlinearity and enable terahertz soliton repetition rates. However, such high repetition rates are not amenable to direct electronic detection. Here, we demonstrate hybrid Kerr and electr…
▽ More
Advances in microresonator-based soliton generation promise chip-scale integration of optical frequency comb for applications spanning from time kee** to frequency synthesis. Miniaturized cavities harness Kerr nonlinearity and enable terahertz soliton repetition rates. However, such high repetition rates are not amenable to direct electronic detection. Here, we demonstrate hybrid Kerr and electro-optic microcombs using the lithium niobate thin film that exhibits both Kerr and Pockels nonlinearities. By interleaving the high-repetition-rate Kerr soliton comb with the low-repetition-rate electro-optic comb on the same waveguide, the wide Kerr soliton mode spacing is divided within a single chip, allowing for subsequent electronic detection and feedback control of the soliton repetition rate. Our work establishes an integrated electronic interface to Kerr solitons of terahertz repetition rates, paving the path towards chipscale optical-to-microwave frequency division and comb locking.
△ Less
Submitted 6 February, 2022;
originally announced February 2022.
-
Pattern Recognition for the Electronic Phase of Bismuth Antimony Thin Films
Authors:
Shuang Tang,
Lucy Dow,
Emmanuel Ojukwu
Abstract:
There are many applications involving the use of bismuth antimony thin films. However, due to the low crystalline symmetry and strong coupling between the electronic band edges, it has always been challenging to infer the electronic phase of such a material. Fortunately, with the development of pattern recognition technology, scientists can build many black-box tools for predicting various materia…
▽ More
There are many applications involving the use of bismuth antimony thin films. However, due to the low crystalline symmetry and strong coupling between the electronic band edges, it has always been challenging to infer the electronic phase of such a material. Fortunately, with the development of pattern recognition technology, scientists can build many black-box tools for predicting various materials properties. In this present work, we have developed several pattern recognition tools to predict the electronic phase of a bismuth antimony thin film. The support vector machine, the decision tree, and the artificial neural network are used to achieve a prediction accuracy of ~90%, ~95% and ~100%, respectively.
△ Less
Submitted 15 January, 2022;
originally announced January 2022.
-
Machine Learning to Predict the L-Point Direct Bandgap of Bi1-xSbx Nanomaterials
Authors:
Shuang Tang,
Jenna Jean-Baptiste,
Schuyler Vecchiano,
Adam Lukasiewicz,
Alexandria Burger
Abstract:
With the development of modern nanoscience and nanotechnology, Bi1-xSbx can be synthesized into different nanoscale and nanostructured forms, including thin films, nanowires, nanotubes, nanoribbons, and many others. However, due to the strong correlation between electrons and holes at the L-point in the Brillouin zone, the direct band evolves in an anomalous manner under the quantum confinement wh…
▽ More
With the development of modern nanoscience and nanotechnology, Bi1-xSbx can be synthesized into different nanoscale and nanostructured forms, including thin films, nanowires, nanotubes, nanoribbons, and many others. However, due to the strong correlation between electrons and holes at the L-point in the Brillouin zone, the direct band evolves in an anomalous manner under the quantum confinement when nanostructured. Due to the alloying and the low symmetry, predicting the L-point direct bandgap in a nanomaterial using either ab initio calculations or kp perturbations can be computationally costive or inaccurate. We here try to solve this problem using the machine learning methods, including the support vector regression, the regression tree, the Gaussian process regression, and the artificial neural network. A goodness-of-fit of ~0.99 can be achieved for Bi1-xSbx thin films and nanowires.
△ Less
Submitted 15 January, 2022;
originally announced January 2022.
-
Unidirectional acoustic metamaterials based on nonadiabatic holonomic quantum transformations
Authors:
**-Lei Wu,
Shuai Tang,
Yan Wang,
Xiaosai Wang,
**-Xuan Han,
Cheng Lü,
Jie Song,
Shi-Lei Su,
Yan Xia,
Yongyuan Jiang
Abstract:
Nonadiabatic holonomic quantum transformations (NHQTs) have attracted wide attention and have been applied in many aspects of quantum computation, whereas related research is usually limited to the field of quantum physics. Here we bring NHQTs into constructing a unidirectional acoustic metamaterial (UDAM) for sha** classical beams. The UDAM is made up of an array of three-waveguide couplers, wh…
▽ More
Nonadiabatic holonomic quantum transformations (NHQTs) have attracted wide attention and have been applied in many aspects of quantum computation, whereas related research is usually limited to the field of quantum physics. Here we bring NHQTs into constructing a unidirectional acoustic metamaterial (UDAM) for sha** classical beams. The UDAM is made up of an array of three-waveguide couplers, where the propagation of acoustic waves mimics the evolution of NHQTs. The excellent agreement among analytical predictions, numerical simulations, and experimental measurements confirms the great applicability of NHQTs in acoustic metamaterial engineering. The present work extends research on NHQTs from quantum physics to the field of classical waves for designing metamaterials with simple structures and may pave a new way to design UDAMs that would be of potential applications in acoustic isolation, communication, and stealth.
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
Pulse envelope effects in nonlinear Breit-Wheeler pair-creation
Authors:
S. Tang,
B. King
Abstract:
The effect of the pulse envelope on electron-positron pair creation in a circularly-polarised laser pulse is investigated. Interference on the length scale of the pulse envelope, and smoothness of the pulse edges are found to influence the pair spectrum. A toy model of a flat-top pulse is used to identify pulse envelope effects inaccessible to local approaches. Broadening of channel openings and a…
▽ More
The effect of the pulse envelope on electron-positron pair creation in a circularly-polarised laser pulse is investigated. Interference on the length scale of the pulse envelope, and smoothness of the pulse edges are found to influence the pair spectrum. A toy model of a flat-top pulse is used to identify pulse envelope effects inaccessible to local approaches. Broadening of channel openings and a widening of the energy and transverse momentum distribution of the pair are found to receive contributions that are below the local harmonic threshold. By comparing pair yields in a flat-top, sine-squared and Gaussian pulse, a link between pulse shape and photon-polarised Breit-Wheeler is found. In the transverse momentum distribution, a signal of pulse envelope interference is found in an azimuthal asymmetry, which appears in intense fields and persists in long pulses.
△ Less
Submitted 1 September, 2021;
originally announced September 2021.
-
Improving the particle identification of radioactive isotope beams at the RIBLL2 separator
Authors:
Fang Fang,
Shuwen Tang,
Shitao Wang,
Xueheng Zhang,
Zhiyu Sun,
Yuhong Yu,
Duo Yan,
Shuya **,
Yixuan Zhao,
Shaobo Ma,
Yongjie Zhang
Abstract:
To improve the ability of particle identification of the RIBLL2 separator at the HIRFL-CSR complex, a new high-performance detector for measuring fragment starting time and position at the F1 dispersive plane has been constructed and installed, and a method for achieving precise B\r{ho} determination has been developed using the experimentally derived ion-optical transfer matrix elements from the…
▽ More
To improve the ability of particle identification of the RIBLL2 separator at the HIRFL-CSR complex, a new high-performance detector for measuring fragment starting time and position at the F1 dispersive plane has been constructed and installed, and a method for achieving precise B\r{ho} determination has been developed using the experimentally derived ion-optical transfer matrix elements from the measured position and ToF information. Using the high-performance detectors and the precise B\r{ho} determination method, the fragments produced by the fragmentation of 78Kr at 300 MeV/nucleon were identified clearly at the RIBLL2-ETF under full momentum acceptance. The atomic number Z resolution of σZ~0.19 and the mass-to-charge ratio A/Q resolution of σA/Q~5.8e-3 were obtained for the 75As33+ fragment. This great improvement will increase the collection efficiency of exotic nuclei, extend the range of nuclei of interest from the A<40 mass region up to the A~80 mass region, and promote the development of radioactive nuclear beam experiments at the RIBLL2 separator.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
Effect of symmetry defect on the edge resonance of semi-infinite FGM plates
Authors:
Shengyu Tang,
Wen** Bi,
**gwei Yin,
Vincent Pagneux
Abstract:
The effect of asymmetric functionally graded material on the edge resonance and the Fano resonance in semi-infinite FGM plates are reported in this work. The edge resonance is weakened by the material perturbation and the complete mode conversion is illustrated with incident $S_0$ mode. The Fano resonance occurs on the reflected $A_0$ mode as a result of interference between the resonance and dire…
▽ More
The effect of asymmetric functionally graded material on the edge resonance and the Fano resonance in semi-infinite FGM plates are reported in this work. The edge resonance is weakened by the material perturbation and the complete mode conversion is illustrated with incident $S_0$ mode. The Fano resonance occurs on the reflected $A_0$ mode as a result of interference between the resonance and direct scattering with incident $A_0$ mode. A hybrid analytical model based on the collocation discretization and the modal decomposition of the elastic field is developed to analyze the scattering properties of the semi-infinite plates. The Fano line-shape is discussed in detail. The results show that the Fano line shape is sensitive to the volume fraction, which is beneficial for the quantitative guided wave application.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
Phase transition and cascading collapse in binary decision-making dynamics
Authors:
Xuyang Chen,
Xin Wang,
Longzhao Liu,
Shaoting Tang,
Zhiming Zheng
Abstract:
Binary decision-making process is ubiquitous in social life and is of vital significance in many real-world issues, ranging from public health to political campaigns. While continuous opinion evolution independent of discrete choice behavior has been extensively studied, few works unveil how the group binary decision-making result is determined by the coupled dynamics of these two processes. To th…
▽ More
Binary decision-making process is ubiquitous in social life and is of vital significance in many real-world issues, ranging from public health to political campaigns. While continuous opinion evolution independent of discrete choice behavior has been extensively studied, few works unveil how the group binary decision-making result is determined by the coupled dynamics of these two processes. To this end, we propose an agent-based model to study the collective behaviors of individual binary decision-making process through competitive opinion dynamics on social networks. Three key factors are considered: bounded confidence that describes the cognitive scope of the population, stubbornness level that characterizes the opinion updating speed, and the opinion strength that represents the asymmetry power or attractiveness of the two choices. We find that bounded confidence plays an important role in determining competing evolution results. As bounded confidence grows, population opinions experience polarization to consensus, leading to the emergence of phase transition from co-existence to winner-takes-all state under binary decisions. Of particular interest, we show how the combined effects of bounded confidence and asymmetry opinion strength may reverse the initial supportive advantage in competitive dynamics. Notably, our model qualitatively reproduces the important dynamical pattern during a brutal competition, namely, cascading collapse, as observed by real data. Finally and intriguingly, we find that individual cognitive heterogeneity can bring about randomness and unpredictability in binary decision-making process, leading to the emergence of indeterministic oscillation. Our results reveal how the diverse behavioral patterns of binary decision-making can be interpreted by the complicated interactions of the proposed elements, which provides important insights toward competitive dynamics
△ Less
Submitted 24 May, 2021;
originally announced May 2021.
-
Modeling confirmation bias and peer pressure in opinion dynamics
Authors:
Longzhao Liu,
Xin Wang,
Shaoting Tang,
Zhiming Zheng
Abstract:
Confirmation bias and peer pressure both have substantial impacts on the formation of collective decisions. Nevertheless, few attempts have been made to study how the interplay between these two mechanisms affects public opinion evolution. Here we propose an agent-based model of opinion dynamics which incorporates the conjugate effect of confirmation bias (characterized by the population identity…
▽ More
Confirmation bias and peer pressure both have substantial impacts on the formation of collective decisions. Nevertheless, few attempts have been made to study how the interplay between these two mechanisms affects public opinion evolution. Here we propose an agent-based model of opinion dynamics which incorporates the conjugate effect of confirmation bias (characterized by the population identity scope and individual stubbornness) and peer pressure (described by a susceptibility threshold). We show that the number of opinion fragments first increases and then decreases to one as population identity scope becomes larger in a homogeneous population. Further, in heterogeneous situations, we find that even a small fraction of impressionable individuals who are sensitive to peer pressure could help eliminate public polarization when population identity scope is relatively large. Intriguingly, we highlight the emergence of 'impressionable moderates' who are easily influenced, hold wavering opinions, and are of vital significance in competitive campaigns.
△ Less
Submitted 19 December, 2020;
originally announced December 2020.