-
Achieving a Near-Ideal Silicon Crystal Neutron Interferometer using Sub-Micron Fabrication Techniques
Authors:
M. G. Huber,
I. Taminiau,
D. G. Cory,
B. Heacock,
D. Sarenac,
R. Valdillez,
D. A. Pushin
Abstract:
Perfect-crystal neutron interferometry which is analogous to Mach-Zehnder interferometry, uses Bragg diffraction to form interfering neutron paths. The measured phase shifts can be used to probe many types of interactions whether it be nuclear, electromagnetic, gravitational, or topological in nature. For a perfect-crystal interferometer to preserve coherence, the crystal must possess a high degre…
▽ More
Perfect-crystal neutron interferometry which is analogous to Mach-Zehnder interferometry, uses Bragg diffraction to form interfering neutron paths. The measured phase shifts can be used to probe many types of interactions whether it be nuclear, electromagnetic, gravitational, or topological in nature. For a perfect-crystal interferometer to preserve coherence, the crystal must possess a high degree of dimensional tolerance as well as being relatively defect-free with minimal internal stresses. In the past, perfect-crystal neutron interferometers have been produced by a two step process. First, a resin diamond wheel would be used to remove excess material and shape the interferometer. Afterword, the crystal would be etched in order to remove surface defects and elevate strains. This process has had limitations in terms of repeatability and in maximizing the final contrast, or fringe visibility, of the interferometer. We have tested various fabrication and post-fabrication techniques on a single perfect-crystal neutron interferometer and measured the interferometer's performance at each step. Here we report a robust, repeatable non-etching fabrication process with high final contrast. For the interferometer used in this work, we achieved contrasts of greater than 90% several separate times and ultimately finished with an interferometer that has 92% contrast and a uniform phase distribution.
△ Less
Submitted 25 February, 2024;
originally announced February 2024.
-
Next-generation high transmission neutron optical devices utilizing micro-machined structures
Authors:
C. Kapahi,
D. Sarenac,
M. Bleuel,
D. G. Cory,
B. Heacock,
M. Henderson,
M. G. Huber,
I. Taminiau,
D. A. Pushin
Abstract:
Neutrons have emerged as a unique probe at the forefront of modern material science, unrivaled in their penetrating abilities. A major challenge stems from the fact that neutron optical devices are limited to refractive indices on the order of $n\approx 1 \pm 10^{-5}$. By exploiting advances in precision manufacturing, we have designed and constructed a micro-meter period triangular grating with a…
▽ More
Neutrons have emerged as a unique probe at the forefront of modern material science, unrivaled in their penetrating abilities. A major challenge stems from the fact that neutron optical devices are limited to refractive indices on the order of $n\approx 1 \pm 10^{-5}$. By exploiting advances in precision manufacturing, we have designed and constructed a micro-meter period triangular grating with a high aspect ratio of $14.3$. The manufacturing quality is demonstrated with white-light interferometric data and microscope imaging. Neutron scattering experiment results are presented, showing agreement to refraction modelling. The capabilities of neutron Fresnel lenses based on this design are contrasted to existing neutron focusing techniques and the path separation of a prism-based neutron interferometer is estimated.
△ Less
Submitted 24 December, 2021;
originally announced December 2021.
-
Increased interference fringe visibility from the post fabrication heat treatment of a perfect crystal silicon neutron interferometer
Authors:
Benjamin Heacock,
Muhammad Arif,
David G Cory,
Thomas Gnaupel-Herold,
Robert Williamson Haun,
Michael G. Huber,
Michelle Elizabeth Jamer,
Joachim Nsofini,
Dmitry A Pushin,
Dusan Sarenac,
Ivar A. J. Taminiau,
Albert Young
Abstract:
Construction of silicon neutron interferometers requires a perfect crystal silicon ingot (5 cm to 30 cm long) be machined such that Bragg diffracting "blades" protrude from a common base. Leaving the interferometer blades connected to the same base preserves Bragg plane alignment, but if the interferometer contains crystallographic misalignments of greater than about 10 nrad between the blades, in…
▽ More
Construction of silicon neutron interferometers requires a perfect crystal silicon ingot (5 cm to 30 cm long) be machined such that Bragg diffracting "blades" protrude from a common base. Leaving the interferometer blades connected to the same base preserves Bragg plane alignment, but if the interferometer contains crystallographic misalignments of greater than about 10 nrad between the blades, interference fringe visibility begins to suffer. Additionally, the parallelism, thickness, and distance between the blades must be machined to micron tolerances. Traditionally, interferometers do not exhibit usable interference fringe visibility until 30 $μ$m to 60 $μ$m of machining surface damage is chemically etched away. However, if too much material is removed, the uneven etch rates across the interferometer cause the shape of the crystal blades to be outside of the required tolerances. As a result, the ultimate interference fringe visibility varies widely among neutron interferometers that are created under similar conditions. We find that annealing a previously etched interferometer at $800^\circ \mathrm{C}$ dramatically increased interference fringe visibility from 23 % to 90 %. The Bragg plane misalignments were also measured before and after annealing using neutron rocking curve interference peaks, showing that Bragg plane alignment was improved across the interferometer after annealing. This suggests that current interferometers with low fringe visibility may be salvageable and that annealing may become an important step in the fabrication process of future neutron interferometers, leading to less need for chemical etching and larger, more exotic neutron interferometers.
△ Less
Submitted 17 October, 2017;
originally announced October 2017.
