-
The design and performance of the XL-Calibur anticoincidence shield
Authors:
N. K. Iyer,
M. Kiss,
M. Pearce,
T. -A. Stana,
H. Awaki,
R. G. Bose,
A. Dasgupta,
G. De Geronimo,
E. Gau,
T. Hakamata,
M. Ishida,
K. Ishiwata,
W. Kamogawa,
F. Kislat,
T. Kitaguchi,
H. Krawczynski,
L. Lisalda,
Y. Maeda,
H. Matsumoto,
A. Miyamoto,
T. Miyazawa,
T. Mizuno,
B. F. Rauch,
N. Rodriguez Cavero,
N. Sakamoto
, et al. (9 additional authors not shown)
Abstract:
The XL-Calibur balloon-borne hard X-ray polarimetry mission comprises a Compton-scattering polarimeter placed at the focal point of an X-ray mirror. The polarimeter is housed within a BGO anticoincidence shield, which is needed to mitigate the considerable background radiation present at the observation altitude of ~40 km. This paper details the design, construction and testing of the anticoincide…
▽ More
The XL-Calibur balloon-borne hard X-ray polarimetry mission comprises a Compton-scattering polarimeter placed at the focal point of an X-ray mirror. The polarimeter is housed within a BGO anticoincidence shield, which is needed to mitigate the considerable background radiation present at the observation altitude of ~40 km. This paper details the design, construction and testing of the anticoincidence shield, as well as the performance measured during the week-long maiden flight from Esrange Space Centre to the Canadian Northwest Territories in July 2022. The in-flight performance of the shield followed design expectations, with a veto threshold <100 keV and a measured background rate of ~0.5 Hz (20-40 keV). This is compatible with the scientific goals of the mission, where %-level minimum detectable polarisation is sought for a Hz-level source rate.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Design, Construction, and Test of the Gas Pixel Detectors for the IXPE Mission
Authors:
L. Baldini,
M. Barbanera,
R. Bellazzini,
R. Bonino,
F. Borotto,
A. Brez,
C. Caporale,
C. Cardelli,
S. Castellano,
M. Ceccanti,
S. Citraro,
N. Di Lalla,
L. Latronico,
L. Lucchesi,
C. Magazzù,
G. Magazzù,
S. Maldera,
A. Manfreda,
M. Marengo,
A. Marrocchesi,
P. Mereu,
M. Minuti,
F. Mosti,
H. Nasimi,
A. Nuti
, et al. (69 additional authors not shown)
Abstract:
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collectin…
▽ More
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collecting anode. In this paper we shall review the design, manufacturing, and test of the IXPE focal-plane detectors, with particular emphasis on the connection between the science drivers, the performance metrics and the operational aspects. We shall present a thorough characterization of the GPDs in terms of effective noise, trigger efficiency, dead time, uniformity of response, and spectral and polarimetric performance. In addition, we shall discuss in detail a number of instrumental effects that are relevant for high-level science analysis -- particularly as far as the response to unpolarized radiation and the stability in time are concerned.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
INO: Interplanetary Network of Optical Lattice Clocks
Authors:
Toshikazu Ebisuzaki,
Hidetoshi Katori,
Jun'ichiro Makino,
Atsushi Noda,
Hisaaki Shinkai,
Toru Tamagawa
Abstract:
The new technique of measuring frequency by optical lattice clocks now approaches to the relative precision of $(Δf/f)=O(10^{-18})$. We propose to place such precise clocks in space and to use Doppler tracking method for detecting low-frequency gravitational wave below 1 Hz. Our idea is to locate three spacecrafts at one A.U. distance (say at L1, L4 & L5 of the Sun-Earth orbit), and apply the Dopp…
▽ More
The new technique of measuring frequency by optical lattice clocks now approaches to the relative precision of $(Δf/f)=O(10^{-18})$. We propose to place such precise clocks in space and to use Doppler tracking method for detecting low-frequency gravitational wave below 1 Hz. Our idea is to locate three spacecrafts at one A.U. distance (say at L1, L4 & L5 of the Sun-Earth orbit), and apply the Doppler tracking method by communicating "the time" each other. Applying the current available technologies, we obtain the sensitivity for gravitational wave with three or four-order improvement ($h_{\rm n}\sim 10^{-17}$ or $10^{-18}$ level in $10^{-5}$Hz -- $1$ Hz) than that of Cassini spacecraft in 2001. This sensitivity enables us to observe black-hole mergers of their mass greater than $10^5 M_\odot$ in the cosmological scale. Based on the hierarchical growth model of black-holes in galaxies, we estimate the event rate of detection will be 20-50 a year. We nickname "INO" (Interplanetary Network of Optical Lattice Clocks) for this system, named after Tadataka Ino (1745--1818), a Japanese astronomer, cartographer, and geodesist.
△ Less
Submitted 11 February, 2019; v1 submitted 26 September, 2018;
originally announced September 2018.
-
Termination of Electron Acceleration in Thundercloud by Intra/Inter-cloud Discharge
Authors:
Yuuki Wada,
Gregory S. Bowers,
Teruaki Enoto,
Masashi Kamogawa,
Yoshitaka Nakamura,
Takeshi Morimoto,
David M. Smith,
Yoshihiro Furuta,
Kazuhiro Nakazawa,
Takayuki Yuasa,
Atsushi Matsuki,
Mamoru Kubo,
Toru Tamagawa,
Kazuo Makishima,
Harufumi Tsuchiya
Abstract:
An on-ground observation program for high energy atmospheric phenomena in winter thunderstorms along Japan Sea has been performed via measurements of gamma-ray radiation, atmospheric electric field and low-frequency radio band. On February 11, 2017, the radiation detectors recorded gamma-ray emission lasting for 75 sec. The gamma-ray spectrum extended up to 20 MeV and was reproduced by a cutoff po…
▽ More
An on-ground observation program for high energy atmospheric phenomena in winter thunderstorms along Japan Sea has been performed via measurements of gamma-ray radiation, atmospheric electric field and low-frequency radio band. On February 11, 2017, the radiation detectors recorded gamma-ray emission lasting for 75 sec. The gamma-ray spectrum extended up to 20 MeV and was reproduced by a cutoff power-law model with a photon index of $1.36^{+0.03}_{-0.04}$, being consistent with a Bremsstrahlung radiation from a thundercloud (as known as a gamma-ray glow and a thunderstorm ground enhancement). Then the gamma-ray glow was abruptly terminated with a nearby lightning discharge. The low-frequency radio monitors, installed $\sim$50 km away from the gamma-ray observation site recorded leader development of an intra/inter-cloud discharge spreading over $\sim$60 km area with a $\sim$300 ms duration. The timing of the gamma-ray termination coincided with the moment when the leader development of the intra/inter-cloud discharge passed 0.7 km horizontally away from the radiation monitors. The intra/inter-cloud discharge started $\sim$15 km away from the gamma-ray observation site. Therefore, the glow was terminated by the leader development, while it did not trigger the lightning discharge in the present case.
△ Less
Submitted 12 May, 2018;
originally announced May 2018.
-
Development of a Diehard GEM using PTFE insulator substrate
Authors:
M. Wakabayashi,
K. Komiya,
T. Tamagawa,
Y. Takeuchi,
K. Aoki,
A. Taketani,
H. Hamagaki
Abstract:
We have developed the gas electron multiplier (GEM) using polytetrafluoroethylene (PTFE) insulator substrate (PTFE-GEM). Carbonization on insulator layer by discharges shorts the GEM electrodes, causing permanent breakdown. Since PTFE is hard to be carbonized against arc discharges, PTFE-GEM is expected to be robust against breakdown. Gains as high as 2.6x10^4 were achieved with PTFE-GEM (50 um th…
▽ More
We have developed the gas electron multiplier (GEM) using polytetrafluoroethylene (PTFE) insulator substrate (PTFE-GEM). Carbonization on insulator layer by discharges shorts the GEM electrodes, causing permanent breakdown. Since PTFE is hard to be carbonized against arc discharges, PTFE-GEM is expected to be robust against breakdown. Gains as high as 2.6x10^4 were achieved with PTFE-GEM (50 um thick) in Ar/CO2 = 70%/30% gas mixture at V_GEM = 730V. PTFE-GEM never showed a permanent breakdown even after suffering more than 40000 times discharges during the experiment. The result demonstrates that PTFE-GEM is really robust against discharges. We conclude that PTFE is an excellent insulator material for the GEM productions.
△ Less
Submitted 26 March, 2014;
originally announced March 2014.
-
Property of LCP-GEM in Pure Dimethyl Ether at Low Pressure
Authors:
Y. Takeuchi,
T. Tamagawa,
T. Kitaguchi,
S. Yamada,
W. Iwakiri,
F. Asami,
A. Yoshikawa,
K. Kaneko,
T. Enoto,
A. Hayato,
T. Kohmura,
the GEMS/XACT team
Abstract:
We present a systematic investigation of the gain properties of a gas electron multiplier (GEM) foil in pure dimethyl ether (DME) at low pressures. The GEM is made from copper- clad liquid crystal polymer insulator (LCP-GEM) designed for space use, and is applied to a time projection chamber filled with low-pressure DME gas to observe the linear polarization of cosmic X-rays. We have measured gain…
▽ More
We present a systematic investigation of the gain properties of a gas electron multiplier (GEM) foil in pure dimethyl ether (DME) at low pressures. The GEM is made from copper- clad liquid crystal polymer insulator (LCP-GEM) designed for space use, and is applied to a time projection chamber filled with low-pressure DME gas to observe the linear polarization of cosmic X-rays. We have measured gains of a 100 um-thick LCP-GEM as a function of the voltage between GEM electrodes at various gas pressures ranging from 10 to 190 Torr with 6.4 keV X-rays. The highest gain at 190 Torr is about 2x10^4, while that at 20 Torr is about 500. We find that the pressure and electric-field dependence of the GEM gain is described by the first Townsend coefficient. The energy scale from 4.5 to 8.0 keV is linear with non-linearity of less than 1.4% above 30 Torr.
△ Less
Submitted 27 May, 2014; v1 submitted 9 December, 2013;
originally announced December 2013.
-
Hardening and termination of long-duration gamma rays detected prior to lightning
Authors:
H. Tsuchiya,
T. Enoto,
K. Iwata,
S. Yamada,
T. Yuasa,
T. Kitaguchi,
M. Kawaharada,
K. Nakazawa,
M. Kokubun,
H. Kato,
M. Okano,
T. Tamagawa,
K. Makishima
Abstract:
We report the first observation of 3$-$30 MeV prolonged gamma-ray emission that was abruptly terminated by lightning. The gamma-ray detection was made during winter thunderstorms on December 30, 2010 by the Gamma-Ray Observation of Winter THunderclouds (GROWTH) experiment carried out in a coastal area along the Sea of Japan. The gamma-ray flux lasted for less than 3 min, continuously hardening clo…
▽ More
We report the first observation of 3$-$30 MeV prolonged gamma-ray emission that was abruptly terminated by lightning. The gamma-ray detection was made during winter thunderstorms on December 30, 2010 by the Gamma-Ray Observation of Winter THunderclouds (GROWTH) experiment carried out in a coastal area along the Sea of Japan. The gamma-ray flux lasted for less than 3 min, continuously hardening closer to the lightning occurrence. The hardening at energies of 3$-$10 MeV energies was most prominent. The gamma-ray flux abruptly ceased less than 800 ms before the lightning flash that occurred over 5 km away from the experimental site. In addition, we observed a clear difference in the duration of the 3$-$10 MeV gamma rays and those $>$10 MeV, suggesting that the area of $>$10 MeV gamma-ray emission is considerably smaller than that of the lower-energy gamma rays. This work may give a manifestation that a local region emitting prolonged gamma rays connects with a distant region to initiate lightning.
△ Less
Submitted 10 June, 2013;
originally announced June 2013.
-
Development of Thick-foil and Fine-pitch GEMs with a Laser Etching Technique
Authors:
T. Tamagawa,
A. Hayato,
F. Asami,
K. Abe,
S. Iwamoto,
S. Nakamura,
A. Hayato,
T. Iwahashi,
S. Konami,
H. Hamagaki,
Y. L. Yamaguchi,
H. Tawara,
K. Makishima
Abstract:
We have produced thick-foil and fine-pitch gas electron multipliers (GEMs) using a laser etching technique. To improve production yield we have employed a new material, Liquid Crystal Polymer, instead of polyimide as an insulator layer. The effective gain of the thick-foil GEM with a hole pitch of 140 um, a hole diameter of 70 um, and a thickness of 100 um reached a value of 10^4 at an applied v…
▽ More
We have produced thick-foil and fine-pitch gas electron multipliers (GEMs) using a laser etching technique. To improve production yield we have employed a new material, Liquid Crystal Polymer, instead of polyimide as an insulator layer. The effective gain of the thick-foil GEM with a hole pitch of 140 um, a hole diameter of 70 um, and a thickness of 100 um reached a value of 10^4 at an applied voltage of 720 V. The measured effective gain of the thick-foil and fine-pitch GEM (80 um pitch, 40 um diameter, and 100 um thick) was similar to that of the thick-foil GEM. The gain stability was measured for the thick-foil and fine-pitch GEM, showing no significant increase or decrease as a function of elapsed time from applying the high voltage. The gain stability over 3 h of operation was about 0.5%. Gain map** across the GEM showed a good uniformity with a standard deviation of about 4%. The distribution of hole diameters across the GEM was homogeneous with a standard deviation of about 3%. There was no clear correlation between the gain and hole diameter maps.
△ Less
Submitted 2 October, 2009;
originally announced October 2009.