-
Pressure fluctuations of liquids under short-time acceleration
Authors:
Chihiro Kurihara,
Akihito Kiyama,
Yoshiyuki Tagawa
Abstract:
This study experimentally investigates the pressure fluctuations of liquids in a column under short-time acceleration and demonstrates that the Strouhal number $St$ [$=L/(cΔt)$, where $L$, $c$, and $Δt$ are the liquid column length, speed of sound, and acceleration duration, respectively] provides a measure of the pressure fluctuations both for limiting cases (i.e. $St\ll1$ or $St = \infty$) and f…
▽ More
This study experimentally investigates the pressure fluctuations of liquids in a column under short-time acceleration and demonstrates that the Strouhal number $St$ [$=L/(cΔt)$, where $L$, $c$, and $Δt$ are the liquid column length, speed of sound, and acceleration duration, respectively] provides a measure of the pressure fluctuations both for limiting cases (i.e. $St\ll1$ or $St = \infty$) and for intermediate $St$ values. Incompressible fluid theory and water hammer theory respectively imply that the magnitude of the averaged pressure fluctuation $\overline{P}$ becomes negligible for $St\ll1$ (i.e., in the condition where the duration of acceleration $Δt$ is large enough compared to the acoustic timescale) and tends to $ρcu_0$ (where $u_0$ is the change in the liquid velocity) for $St\geq O(1)$ (i.e., in the condition where $Δt$ is small enough). For intermediate $St$ values, there is no consensus on the value of $\overline{P}$. In our experiments, $L$, $c$, and $Δt$ are varied so that $0.02 \leq St \leq 2.2$. The results suggest that the incompressible fluid theory holds only up to $St\sim0.2$ and that $St$ governs the pressure fluctuations under different experimental conditions for higher $St$ values. The data relating to a hydrogel also tend to collapse to a unified trend. The inception of cavitation in the liquid starts at $St\sim 0.2$ for various $Δt$, indicating that the liquid pressure becomes negative. To understand this mechanism, we employ a one-dimensional wave propagation model with a pressure wavefront of finite thickness that scales with $Δt$. The model provides a reasonable description of the experimental results as a function of $St$. The slight discrepancy between the model and experimental results reveals additional contributing factors such as the container motion and the profile of the pressure wavefront.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Flow birefringence of cellulose nanocrystal suspensions in three-dimensional flow fields: revisiting the stress-optic law
Authors:
Kento Nakamine,
Yuto Yokoyama,
William Kai Alexander Worby,
Masakazu Muto,
Yoshiyuki Tagawa
Abstract:
This study systematically investigates the flow birefringence of cellulose nanocrystal (CNC) suspensions. The aim is to clarify the importance of the stress component along the camera's optical axis in the stress-optic law (SOL), which describes the relationship between birefringence, the retardation of transmitted polarized light, and the stress field. More than 100 datasets pertaining to the ret…
▽ More
This study systematically investigates the flow birefringence of cellulose nanocrystal (CNC) suspensions. The aim is to clarify the importance of the stress component along the camera's optical axis in the stress-optic law (SOL), which describes the relationship between birefringence, the retardation of transmitted polarized light, and the stress field. More than 100 datasets pertaining to the retardation of CNC suspensions (concentrations of 0.1, 0.3, 0.5, and 1.0 wt\%) in a laminar flow field within a rectangular channel (aspect ratios of 0.1, 1, and 3) are systematically obtained. The measured retardation data are compared with the predictions given by the conventional SOL excluding the stress component along the camera's optical axis and by the SOL including these components as second-order terms (2nd-order SOL). The results show that the 2nd-order SOL gives a significantly better agreement with the measurements. Based on the 2nd-order SOL, the retardation at the center of the channel, where the effect of the stress component along the camera's optical axis is most pronounced, is predicted to be proportional to the square of the flow rate, which agrees with the experimental data. The results confirm the importance of considering the stress component along the camera's optical axis in the flow birefringence of CNC suspensions at high flow rates, even for quasi-two-dimensional channel flow.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Optimal standoff distance for a highly focused microjet penetrating a soft material
Authors:
Daichi Igarashi,
Kento Kimura,
Nanami Endo,
Yuto Yokoyama,
Hiroaki Kusuno,
Yoshiyuki Tagawa
Abstract:
A needle-free injector using a highly focused microjet has the potential to minimize the invasiveness of drug delivery. In this study, the jet penetration depth in a soft material-which is a critical parameter for practical needle-free injections-was investigated. We conducted jet penetration experiments by varying the inner diameter of the injection tube and the standoff distance between the meni…
▽ More
A needle-free injector using a highly focused microjet has the potential to minimize the invasiveness of drug delivery. In this study, the jet penetration depth in a soft material-which is a critical parameter for practical needle-free injections-was investigated. We conducted jet penetration experiments by varying the inner diameter of the injection tube and the standoff distance between the meniscus surface and the soft material. Interestingly, the results showed that the penetration depths peaked at certain distances from the meniscus, and the positions shifted further away as the inner diameter was increased. By analyzing the velocity distribution of the microjet, the peak positions of the penetration depth and the maximum velocities were inconsistent due to the effects of the jet shape. To account for this, we introduce the concept of the 'jet pressure impulse', a physical quantity that unifies the velocity and jet shape. However, direct estimation of this parameter from experimental data is challenging due to limitations in spatiotemporal resolution. Therefore, we used numerical simulations to replicate the experimental conditions and calculate the jet pressure impulse. Remarkably, the results show that the jet pressure impulse has peak values, which is consistent with the penetration depth. In addition, there is a correlation between the magnitude of the jet pressure impulse and the penetration depth, highlighting its importance as a key parameter. This study underlines the importance of the jet pressure impulse in controlling the penetration depth of a focused microjet, providing valuable insights for the practical use of needle-free injection techniques.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
High-speed photoelastic tomography for axisymmetric stress fields in a soft material: temporal evolution of all stress components
Authors:
Yuto Yokoyama,
Sayaka Ichihara,
Yoshiyuki Tagawa
Abstract:
This study presents a novel approach for reconstructing all stress components of the dynamic axisymmetric fields of a soft material using photoelastic tomography (PT) and a high-speed polarization camera. This study focuses on static and dynamic Hertzian contact as an example of transient stress field reconstructions. For the static Hertzian contact (a solid sphere pressed against a gel block), al…
▽ More
This study presents a novel approach for reconstructing all stress components of the dynamic axisymmetric fields of a soft material using photoelastic tomography (PT) and a high-speed polarization camera. This study focuses on static and dynamic Hertzian contact as an example of transient stress field reconstructions. For the static Hertzian contact (a solid sphere pressed against a gel block), all stress components in the urethane gel, which has an elastic modulus of 47.4 kPa, were reconstructed by PT using the measured photoelastic parameters. The results were compared with theoretical solutions and showed good agreement. For the dynamic Hertzian contact (a sphere impacting gel), a high-speed polarization camera was used to reconstruct the transient stress field within the gel. PT was used to quantitatively measure the shear and axial stress waves and showed different propagation speeds on the substrate. The technique allowed the simultaneous measurement of stress fields ranging from $O(10^{-1})$ to $O(10^1)$ kPa during large deformations, demonstrating its accuracy in capturing rapidly changing stress tensor components in dynamic scenarios. The scaling laws of the calculated impact force agreed with theoretical predictions, validating the accuracy of PT for measuring dynamic axisymmetric stress fields in soft materials.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
The effects of cavitation position on the velocity of a laser-induced microjet extracted using explainable artificial intelligence
Authors:
Daichi Igarashi,
**gzu Yee,
Yuto Yokoyama,
Hiroaki Kusuno,
Yoshiyuki Tagawa
Abstract:
The control of the velocity of a high-speed laser-induced microjet is crucial in applications such as needle-free injection. Previous studies have indicated that the jet velocity is heavily influenced by the volumes of secondary cavitation bubbles generated through laser absorption. However, there has been a lack of investigation of the relationship between the positions of cavitation bubbles and…
▽ More
The control of the velocity of a high-speed laser-induced microjet is crucial in applications such as needle-free injection. Previous studies have indicated that the jet velocity is heavily influenced by the volumes of secondary cavitation bubbles generated through laser absorption. However, there has been a lack of investigation of the relationship between the positions of cavitation bubbles and the jet velocity. In this study, we investigate the effects of cavitation bubbles on the jet velocity of laser-induced microjets extracted using explainable artificial intelligence (XAI). An XAI is used to classify the jet velocity from images of cavitation bubbles and to extract features from the images through visualization of the classification process. For this purpose, we run 1000 experiments and collect the corresponding images. The XAI model, which is a feedforward neural network (FNN), is trained to classify the jet velocity from the images of cavitation bubbles. After achieving a high classification accuracy, we analyze the classification process of the FNN. The predictions of the FNN, when considering the cavitation positions, show a higher correlation with the jet velocity than the results considering only cavitation volumes. Further investigation suggested that cavitation that occurs closer to the laser focus position has a higher acceleration effect. These results suggest that the velocity of a high-speed microjet is also affected by the cavitation position.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Correlation between morphological evolution of splashing drop and exerted impact force revealed by interpretation of explainable artificial intelligence
Authors:
**gzu Yee,
Daichi Igarashi,
Pradipto,
Akinori Yamanaka,
Yoshiyuki Tagawa
Abstract:
This study reveals a possible correlation between splashing morphology and the normalized impact force exerted by an impacting drop on a solid surface. This finding is obtained from a newly proposed feature extraction method and a subsequent interpretation of the classification of splashing and non-splashing drops performed by an explainable artificial intelligence (XAI) video classifier. Notably,…
▽ More
This study reveals a possible correlation between splashing morphology and the normalized impact force exerted by an impacting drop on a solid surface. This finding is obtained from a newly proposed feature extraction method and a subsequent interpretation of the classification of splashing and non-splashing drops performed by an explainable artificial intelligence (XAI) video classifier. Notably, the values of the weight matrix elements of the XAI that correspond to the extracted features are found to change with the temporal evolution of the drop morphology. We compute the rate of change of the contributions of each frame with respect to the classification value of a video as an important index to quantify the contributions of the extracted splashing and non-splashing features at different impact times to the classification of the XAI model. Remarkably, the rate computed for the extracted splashing features is found to closely match the profile of the normalized impact force, where the splashing features are most pronounced immediately after the normalized impact force reaches its peak value. This study has provided an example that clarifies the relationship between the complex morphological evolution of a splashing drop and physical parameters by interpreting the classification of an XAI video classifier.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
A phase diagram of the pinch-off behavior of impulsively-induced viscoelastic liquid jets
Authors:
Asuka Hosokawa,
Kyota Kamamoto,
Hiroya Watanabe,
Hiroaki Kusuno,
Kazuya U. Kobayashi,
Yoshiyuki Tagawa
Abstract:
In this study, we systematically investigate the behaviors of viscoelastic liquid jets using an impulsive force, particularly in the high velocity and high elasticity regimes. The resulting jets are categorized into two types: (i) pinch-off jets, which break up during elongation after ejection, and (ii) no-pinch-off jets, which either retract to the nozzle after maximum elongation, known as `bunge…
▽ More
In this study, we systematically investigate the behaviors of viscoelastic liquid jets using an impulsive force, particularly in the high velocity and high elasticity regimes. The resulting jets are categorized into two types: (i) pinch-off jets, which break up during elongation after ejection, and (ii) no-pinch-off jets, which either retract to the nozzle after maximum elongation, known as `bungee-jumper jets' or return without elongation after ejection. We then propose criteria to delineate these regions using Reynolds number $Re$ and Weissenberg number $Wi$, reflecting the initial conditions at the jet ejection and the solution's rheological properties, respectively. We find that pinch-off jets occur at $Re \gtrsim 23.4Wi$ in high elasticity regimes ($Wi \gtrsim 10$), and at $Re \gtrsim 250$ in low elasticity regimes ($Wi \lesssim 10$). In addition, we demonstrate that the phase diagram of these behaviors can be rationalized through the focused jet modeling using the finitely extensible non-linear elastic dumbbell model with the Chilcott-Rallison closure approximation (FENE-CR).
△ Less
Submitted 29 March, 2024; v1 submitted 4 September, 2023;
originally announced September 2023.
-
Measurement of flow birefringence induced by the shear components along the optical axis using a parallel-plate-type rheometer
Authors:
William Kai Alexander Worby,
Kento Nakamine,
Yuto Yokoyama,
Masakazu Muto,
Yoshiyuki Tagawa
Abstract:
The present study investigated the flow birefringence induced by shear components along a camera's optical axis, which has been neglected in conventional theories of photoelastic measurements. Measurements were conducted for a wide range of shear rates from a direction perpendicular to the shear using a high-speed polarization camera and a parallel-plate-type rheometer. The measurement results obt…
▽ More
The present study investigated the flow birefringence induced by shear components along a camera's optical axis, which has been neglected in conventional theories of photoelastic measurements. Measurements were conducted for a wide range of shear rates from a direction perpendicular to the shear using a high-speed polarization camera and a parallel-plate-type rheometer. The measurement results obtained from a fluid with low viscoelasticity, specifically a dilute suspension of cellulose nanocrystals, showed that the birefringence increases monotonically as the stress components along the camera's optical axis increase. It was also found that the birefringence showed a power law with respect to the shear rate. This letter reports a key fact required for polarization measurements of shear rate (shear stress) in three-dimensional flows.
△ Less
Submitted 21 August, 2023; v1 submitted 18 August, 2023;
originally announced August 2023.
-
Interactions of a collapsing laser-induced cavitation bubble with a hemispherical droplet attached to a rigid boundary
Authors:
Zibo Ren,
Huan Han,
Hao Zeng,
Chao Sun,
Yoshiyuki Tagawa,
Zhigang Zuo,
Shuhong Liu
Abstract:
We investigate experimentally and theoretically the interactions between a cavitation bubble and a hemispherical pendant oil droplet immersed in water. In experiments, the cavitation bubble is generated by a focused laser pulse right below the pendant droplet with well-controlled bubble-wall distances and bubble-droplet size ratios. By high-speed imaging, four typical interactions are observed, na…
▽ More
We investigate experimentally and theoretically the interactions between a cavitation bubble and a hemispherical pendant oil droplet immersed in water. In experiments, the cavitation bubble is generated by a focused laser pulse right below the pendant droplet with well-controlled bubble-wall distances and bubble-droplet size ratios. By high-speed imaging, four typical interactions are observed, namely, oil droplet rupture, water droplet entrapment, oil droplet large deformation, and oil droplet mild deformation. The bubble jetting at the end of collapse and the migration of the bubble centroid are particularly different in each bubble-droplet interaction. We propose theoretical models based on the method of images for calculating the Kelvin impulse and the anisotropy parameter which quantitatively reflects the migration of the bubble centroid at the end of the collapse. Finally, we explain that a combination of the Weber number and the anisotropy parameter determines the regimes of the bubble-droplet interactions.
△ Less
Submitted 23 October, 2023; v1 submitted 4 April, 2023;
originally announced April 2023.
-
Prediction of the morphological evolution of a splashing drop using an encoder-decoder
Authors:
**gzu Yee,
Daichi Igarashi,
Shun Miyatake,
Yoshiyuki Tagawa
Abstract:
The impact of a drop on a solid surface is an important phenomenon that has various implications and applications. However, the multiphase nature of this phenomenon causes complications in the prediction of its morphological evolution, especially when the drop splashes. While most machine-learning-based drop-impact studies have centred around physical parameters, this study used a computer-vision…
▽ More
The impact of a drop on a solid surface is an important phenomenon that has various implications and applications. However, the multiphase nature of this phenomenon causes complications in the prediction of its morphological evolution, especially when the drop splashes. While most machine-learning-based drop-impact studies have centred around physical parameters, this study used a computer-vision strategy by training an encoder-decoder to predict the drop morphologies using image data. Herein, we show that this trained encoder-decoder is able to successfully generate videos that show the morphologies of splashing and non-splashing drops. Remarkably, in each frame of these generated videos, the spreading diameter of the drop was found to be in good agreement with that of the actual videos. Moreover, there was also a high accuracy in splashing/non-splashing prediction. These findings demonstrate the ability of the trained encoder-decoder to generate videos that can accurately represent the drop morphologies. This approach provides a faster and cheaper alternative to experimental and numerical studies.
△ Less
Submitted 24 March, 2023;
originally announced March 2023.
-
Integrated photoelasticity in a soft material: phase retardation, azimuthal angle and stress-optic coefficient
Authors:
Yuto Yokoyama,
Benjamin R. Mitchell,
Ali Nassiri,
Brad L. Kinsey,
Yannis P. Korkolis,
Yoshiyuki Tagawa
Abstract:
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm depending on the loading forces. The resulting photoelastic parameters (phase retardation, azimuthal angle, and stress-optic coefficient) in the gel are measured…
▽ More
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm depending on the loading forces. The resulting photoelastic parameters (phase retardation, azimuthal angle, and stress-optic coefficient) in the gel are measured using a polarization camera. The measured retardation and azimuth are compared with the analytical prediction based on Hertzian contact theory. Remarkably, experimental and analytical results of the photoelastic parameters show a reasonable agreement not only in the retardation but also in the azimuth that is related to the direction of principal stresses and but rarely validated in previous studies, is essential for reconstructing three-dimensional stress fields in soft materials. The stress-optic coefficient of the gelatin gel used is 3.12$\times10^{-8}$ 1/Pa. Such findings proved that integrated photoelasticity is useful for measuring the three-dimensional stress field in soft materials, which is of importance in biomedical engineering and cell printing applications.
△ Less
Submitted 8 July, 2022;
originally announced August 2022.
-
Features of a Splashing Drop on a Solid Surface and the Temporal Evolution extracted through Image-Sequence Classification using an Interpretable Feedforward Neural Network
Authors:
**gzu Yee,
Daichi Igarashi,
Akinori Yamanaka,
Yoshiyuki Tagawa
Abstract:
This paper reports the features of a splashing drop on a solid surface and the temporal evolution, which are extracted through image-sequence classification using a highly interpretable feedforward neural network (FNN) with zero hidden layer. The image sequences used for training-validation and testing of the FNN show the early-stage deformation of milli-sized ethanol drops that impact a hydrophil…
▽ More
This paper reports the features of a splashing drop on a solid surface and the temporal evolution, which are extracted through image-sequence classification using a highly interpretable feedforward neural network (FNN) with zero hidden layer. The image sequences used for training-validation and testing of the FNN show the early-stage deformation of milli-sized ethanol drops that impact a hydrophilic glass substrate with the Weber number ranges between 31-474 (splashing threshold about 173). Specific videographing conditions and digital image processing are performed to ensure the high similarity among the image sequences. As a result, the trained FNNs achieved a test accuracy higher than 96%. Remarkably, the feature extraction shows that the trained FNN identifies the temporal evolution of the ejected secondary droplets around the aerodynamically lifted lamella and the relatively high contour of the main body as the features of a splashing drop, while the relatively short and thick lamella as the feature of a nonsplashing drop. The physical interpretation for these features and their respective temporal evolution have been identified except for the difference in contour height of the main body between splashing and nonsplashing drops. The observation reported in this study is important for the development of a data-driven simulation for modeling the deformation of a splashing drop during the impact on a solid surface.
△ Less
Submitted 3 July, 2022;
originally announced July 2022.
-
Background-oriented Schlieren technique with vector tomography for measurement of axisymmetric pressure fields of laser-induced underwater shock waves
Authors:
Sayaka Ichihara,
Takaaki Shimazaki,
Yoshiyuki Tagawa
Abstract:
This study aims to overcome the problems that existing background-oriented schlieren (BOS) techniques based on computed tomography (CT-BOS) face when measuring pressure fields of laser-induced underwater shock waves. To do this, it proposes a novel BOS technique based on vector tomography (VT-BOS) of an axisymmetric target. The remarkable feature of the proposed technique is the reconstruction of…
▽ More
This study aims to overcome the problems that existing background-oriented schlieren (BOS) techniques based on computed tomography (CT-BOS) face when measuring pressure fields of laser-induced underwater shock waves. To do this, it proposes a novel BOS technique based on vector tomography (VT-BOS) of an axisymmetric target. The remarkable feature of the proposed technique is the reconstruction of an axisymmetric vector field with nonzero divergence, such as the field of a laser-induced underwater shock wave. This approach is based on an approximate relation between the projection of the axisymmetric vector field and the reconstructed vector field. For comparison, the pressure fields of underwater shock waves are measured with VT-BOS, CT-BOS, and a needle hydrophone. It is found that VT-BOS is significantly better than CT-BOS in terms of better convergence, less dependence on the spatial resolution of the acquired images, and lower computational cost. The proposed technique can be applied not only to fluid dynamical fields, but also to other axisymmetric targets in other areas, such as electromagnetics and thermodynamics.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Unsteady rheo-optical measurements of uniaxially extending liquid polymers
Authors:
M. Muto,
Y. Tagawa
Abstract:
The viscoelastic behavior of liquid polymers changes depending on the microstructure of the polymer chains. To investigate the unsteady structural changes induced by polymer chain morphology under stress, we develop a simple rheo-optical technique combining a high-speed polarization camera and drip**-onto-substrate capillary breakup extensional rheometry (CaBER-DoS), which uniaxially extends and…
▽ More
The viscoelastic behavior of liquid polymers changes depending on the microstructure of the polymer chains. To investigate the unsteady structural changes induced by polymer chain morphology under stress, we develop a simple rheo-optical technique combining a high-speed polarization camera and drip**-onto-substrate capillary breakup extensional rheometry (CaBER-DoS), which uniaxially extends and aligns the polymer along the stress direction. Using this technique, the viscoelastic behavior and birefringence field of an extending liquid polymer are simultaneously measured. Unlike the conditions that occur under shear-stress loading with a rotational rheometer, this technique provides a linear relation between birefringence and extensional stress. The measurements reflect the structural change in a flexible polymer (a mixed solution of PEO and CNCs) in the temporal evolution of the birefringence and orientation angle, which is a measure of the orientation state and coil-stretch transition of a polymer chain. Remarkably, within the elasto-capillary regime, the measured birefringence remains constant with a constant orientation state, while the Weissenberg number gradually increases, which provides experimental evidence of the coil-stretch transition of the polymer chain under constant extensional stress loading.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
Contactless pressure measurement of an underwater shock wave in a microtube using a high-resolution background-oriented schlieren technique
Authors:
Shota Yamamoto,
Takaaki Shimazaki,
Andrés Franco-Gómez,
Sayaka Ichihara,
**gzu Yee,
Yoshiyuki Tagawa
Abstract:
A high-resolution background-oriented schlieren (BOS) technique, which utilizes a high-resolution camera and a microdot background pattern, is proposed and used to measure the pressure field of an underwater shock wave in a microtube. The propagation of the shock wave subsequently reaches a concave water-air interface set in the microtube resulting in the ejection of a focused microjet. This high…
▽ More
A high-resolution background-oriented schlieren (BOS) technique, which utilizes a high-resolution camera and a microdot background pattern, is proposed and used to measure the pressure field of an underwater shock wave in a microtube. The propagation of the shock wave subsequently reaches a concave water-air interface set in the microtube resulting in the ejection of a focused microjet. This high spatial-resolution BOS technique can measure the pressure field of a shock front with a width as narrow as the order of only 101 μm with a peak pressure as large as almost 3 MPa, which is significantly narrower and larger, respectively, than a previous study [1]. This significant breakthrough has enabled the simultaneous measurement of the pressure impulse of the shock front and the velocity of the microjet tip. As a result, we have experimentally observed the linear relation between the velocity of the microjet tip and the pressure impulse of the shock front for the cases without secondary cavitation in the liquid bulk. Such relation was theorectically/numerically predicted by Peters [2]. This study demonstrated the capability of the proposed high-resolution BOS technique as a microscale contactless pressure measurement tool for underwater shock waves and potentially other micro- and nano-fluids.
△ Less
Submitted 4 April, 2022; v1 submitted 21 February, 2022;
originally announced February 2022.
-
Background oriented schlieren technique with fast Fourier demodulation for measuring large density-gradient fields of fluids
Authors:
Takaaki Shimazaki,
Sayaka Ichihara,
Yoshiyuki Tagawa
Abstract:
In order to measure the large density-gradient fields of fluids such as underwater shock waves, we employed a fast Fourier demodulation called Fast Checkerboard Demodulation (FCD) method in Background Oriented Schlieren (BOS) technique. BOS is a simple image-based measurement technique that detects the apparent displacement (local distortion) of a background image caused by the density gradient of…
▽ More
In order to measure the large density-gradient fields of fluids such as underwater shock waves, we employed a fast Fourier demodulation called Fast Checkerboard Demodulation (FCD) method in Background Oriented Schlieren (BOS) technique. BOS is a simple image-based measurement technique that detects the apparent displacement (local distortion) of a background image caused by the density gradient of the fluid in front of the background. The cross-correlation particle image velocimetry (PIV) method, which is commonly employed in the BOS technique for detecting the apparent displacement, uses a random-dot background, whereas FCD uses a periodic pattern as the background (e.g., checkerboard pattern, lattice grid pattern (grid scale)) to detect the apparent displacement as the phase change of the pattern in the Fourier space. In this study, we measured the apparent displacement, which is proportional to density gradient of fluid, of an underwater shock wave using FCD and PIV. The results showed that FCD can measure a displacement gradient of up to 2.5 times larger than that which PIV can measure. Furthermore, we systematically investigated the measurement limit of FCD-BOS by changing several parameters of the periodic patterns, such as the grid size. Also, we explored the related parameters in the Fourier space to understand the limitations. It is worth noting that FCD-BOS with lattice grid pattern (grid scale) can measure the apparent displacement as accurately as that with a custom-made pattern, indicating that large density-gradient fields of fluids can be measured using a simple setup with a commercially available (inexpensive) pattern.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
The water entry surface seal behavior of spheres at intermediate speed regimes
Authors:
Akihito Kiyama,
Rafsan Rabbi,
Nathan Speirs,
Jesse Belden,
Yoshiyuki Tagawa,
Tadd T. Truscott
Abstract:
This research focuses on the water entry of spheres in the surface seal regime. Herein, surface seal occurs in the wake of a sphere impact with the water surface and is characterized by splash dome over and cavity pull-away between the \emph{low-speed} ($U<30$~m/s) and \emph{high-speed} ($U>165$~m/s) regimes for various sphere diameters $D$. The established empirical scaling laws for pinch-off tim…
▽ More
This research focuses on the water entry of spheres in the surface seal regime. Herein, surface seal occurs in the wake of a sphere impact with the water surface and is characterized by splash dome over and cavity pull-away between the \emph{low-speed} ($U<30$~m/s) and \emph{high-speed} ($U>165$~m/s) regimes for various sphere diameters $D$. The established empirical scaling laws for pinch-off time $t_p$ hold well for both low and high speeds (i.e., respectively $ t_pUD^{-1}~C_d^{-1/2}=const$ and $ t_pUD^{-1}~C_d^{-1/2}\propto Ca^{-1}$) but the transition deserves refinement. The intermediate regime in particular scales as $t_pUD^{-1}~C_d^{-1/2}\propto Ca^{-1/2}$, which means that the pressure reduction inside the cavity determines the surface seal dynamics as speeds increase. We also report on the transition from deep to surface seal, where the seal time is scaled more like a deep seal. The partial pull-away, ripples on the cavity surface, and the secondary pinch-off are also reported.
△ Less
Submitted 13 February, 2022;
originally announced February 2022.
-
Image features of a splashing drop on a solid surface extracted using a feedforward neural network
Authors:
**gzu Yee,
Akinori Yamanaka,
Yoshiyuki Tagawa
Abstract:
This article reports nonintuitive characteristic of a splashing drop on a solid surface discovered through extracting image features using a feedforward neural network (FNN). Ethanol of area-equivalent radius about 1.29 mm was dropped from impact heights ranging from 4 cm to 60 cm (splashing threshold 20 cm) and impacted on a hydrophilic surface. The images captured when half of the drop impacted…
▽ More
This article reports nonintuitive characteristic of a splashing drop on a solid surface discovered through extracting image features using a feedforward neural network (FNN). Ethanol of area-equivalent radius about 1.29 mm was dropped from impact heights ranging from 4 cm to 60 cm (splashing threshold 20 cm) and impacted on a hydrophilic surface. The images captured when half of the drop impacted the surface were labeled according to their outcome, splashing or nonsplashing, and were used to train an FNN. A classification accuracy higher than 96% was achieved. To extract the image features identified by the FNN for classification, the weight matrix of the trained FNN for identifying splashing drops was visualized. Remarkably, the visualization showed that the trained FNN identified the contour height of the main body of the impacting drop as an important characteristic differentiating between splashing and nonsplashing drops, which has not been reported in previous studies. This feature was found throughout the impact, even when one and three-quarters of the drop impacted the surface. To confirm the importance of this image feature, the FNN was retrained to classify using only the main body without checking for the presence of ejected secondary droplets. The accuracy was still higher than 82%, confirming that the contour height is an important feature distinguishing splashing from nonsplashing drops. Several aspects of drop impact are analyzed and discussed with the aim of identifying the possible mechanism underlying the difference in contour height between splashing and nonsplashing drops.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Droplet impact of blood and blood simulants on a solid surface: Effect of the deformability of red blood cells and the elasticity of plasma
Authors:
Yuto Yokoyama,
Akane Tanaka,
Yoshiyuki Tagawa
Abstract:
Previous studies suggest that the behaviour of impacting blood is similar to that of a Newtonian fluid, which has a shear viscosity equivalent to that of blood at high shear rates. To understand this important fact, we conducted comparative experiments of droplet impact on a glass surface using whole blood and three solutions with a shear viscosity similar to that of blood. Specifically, we used d…
▽ More
Previous studies suggest that the behaviour of impacting blood is similar to that of a Newtonian fluid, which has a shear viscosity equivalent to that of blood at high shear rates. To understand this important fact, we conducted comparative experiments of droplet impact on a glass surface using whole blood and three solutions with a shear viscosity similar to that of blood. Specifically, we used dog's whole blood (deformable red blood cells dispersed in plasma, WB), plasma with non-deformable resin particles (PwP), glycerol and water with resin particles (GWwP), and a commercial blood simulant (hard particles dispersed in a water-based Newtonian solution, BS). The ranges of Reynolds and Weber numbers in our experiments were 550 $<Re<$ 1700 and 120 $<We<$ 860, respectively. Side and bottom views of droplet impact were simultaneously recorded by two high-speed cameras. The spreading radius of the impacting WB droplet in our experiments agreed well with that of Newtonian fluids with viscosity similar to that of WB at high shear rates. Splashing droplets of WB and Newtonian fluids form finger structures (finger-splashing). Although PwP has a viscosity similar to that of WB at high shear rates, an impacting PwP droplet exhibited typical characteristics of impacting suspension droplets, that is, a reduced spreading radius and splashing with ejection of particles. Such significant differences between impacting droplets of PwP and WB indicates that the high deformability of red blood cells in WB plays a crucial role in the Newtonian-like behaviour of blood droplets on impact. Importantly, the impacting BS droplet behaved quite differently from WB in both spreading and splashing. Our results imply that the use of deformable particles rather than hard particles in a BS is essential for mimicking blood droplet impact.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
The direction of the microjet produced by the collapse of a cavitation bubble locatedin between a wall and a free surface
Authors:
Akihito Kiyama,
Takaaki Shimazaki,
José Manuel Gordillo,
Yoshiyuki Tagawa
Abstract:
In this paper, we present a simplified theoretical model based on the method of images that predicts the direction of the microjet produced after the implosion of the cavitation bubble created in between a free interface and rigid wall. Our theoretical predictions have been verified by means of a thorough experimental study in which the distances of the pulsed-laser cavitation bubble to the wall a…
▽ More
In this paper, we present a simplified theoretical model based on the method of images that predicts the direction of the microjet produced after the implosion of the cavitation bubble created in between a free interface and rigid wall. Our theoretical predictions have been verified by means of a thorough experimental study in which the distances of the pulsed-laser cavitation bubble to the wall and the free surface are varied in a systematic manner. In addition, we extend the predictions to arbitrary values of the corner angle, $π/(2n)$ with $n$ a natural number. The present analytical solution will be useful in the design of new strategies aimed at preventing the damage caused by cavitating bubbles over solid substrates
△ Less
Submitted 9 November, 2020;
originally announced December 2020.
-
Shear-wave generation from cavitation in soft solids
Authors:
Julien Rapet,
Yoshiyuki Tagawa,
Claus-Dieter Ohl
Abstract:
The formation and dynamics of cavities in liquids leads to focusing of kinetic energy and emission of longitudinal stress waves during the cavity collapse. Here we report that cavitation in elastic solids may additionally emit shear waves that could affect soft tissues in human bodies/brains. During collapse of the cavity close to an air-solid boundary, the cavity moves away from the boundary and…
▽ More
The formation and dynamics of cavities in liquids leads to focusing of kinetic energy and emission of longitudinal stress waves during the cavity collapse. Here we report that cavitation in elastic solids may additionally emit shear waves that could affect soft tissues in human bodies/brains. During collapse of the cavity close to an air-solid boundary, the cavity moves away from the boundary and forms a directed jet flow, which confines shear stresses in a volume between the bubble and the free boundary. Elastographic and high-speed imaging resolve this process and reveal the origin of a shear wave in this region. Additionally, the gelatin surface deforms and a conical crack evolves. We speculate that tissue fracture observed in medical therapy may be linked to the non-spherical cavitation bubble collapse.
△ Less
Submitted 29 November, 2018;
originally announced February 2019.
-
Bubble Collapse and Jet Formation in Corner Geometries
Authors:
Yoshiyuki Tagawa,
Ivo R. Peters
Abstract:
The collapse of a vapor bubble near a flat solid boundary results in the formation of a jet that is directed towards the boundary. In more complex geometries such as corners, predictions of the collapse cannot be made in a straightforward manner due to the loss of axial symmetry. We experimentally investigate the bubble collapse and jet formation in corners formed of two flat solid boundaries with…
▽ More
The collapse of a vapor bubble near a flat solid boundary results in the formation of a jet that is directed towards the boundary. In more complex geometries such as corners, predictions of the collapse cannot be made in a straightforward manner due to the loss of axial symmetry. We experimentally investigate the bubble collapse and jet formation in corners formed of two flat solid boundaries with different opening angles. Using potential flow analysis, we accurately predict the direction of the jet and bubble displacement. We further show that for a corner with an opening angle $α$, there exist analytic solutions that predict the jet direction for all the cases $α=π/n$, where $n$ is a natural number. These solutions cover, in discrete steps, the full range of corners from the limiting case of a bubble near a single wall ($n=1$) up to a bubble in between parallel walls ($n\rightarrow\infty$).
△ Less
Submitted 16 July, 2018; v1 submitted 29 May, 2018;
originally announced May 2018.
-
Highly Viscous Microjet Generator
Authors:
Hajime Onuki,
Yuto Oi,
Yoshiyuki Tagawa
Abstract:
This paper describes a simple yet novel system for generating a highly viscous microjet. The jet is produced inside a wettable thin tube partially submerged in a liquid. The gas-liquid interface inside the tube, which is initially concave, is kept much deeper than that outside the tube. An impulsive force applied at the bottom of a liquid container leads to significant acceleration of the liquid i…
▽ More
This paper describes a simple yet novel system for generating a highly viscous microjet. The jet is produced inside a wettable thin tube partially submerged in a liquid. The gas-liquid interface inside the tube, which is initially concave, is kept much deeper than that outside the tube. An impulsive force applied at the bottom of a liquid container leads to significant acceleration of the liquid inside the tube followed by flow-focusing due to the concave interface. The jet generation process can be divided into two parts that occur in different time scales, i.e. the Impact time (impact duration $\le O(10^{-4})$ s) and Focusing time (focusing duration $\gg O(10^{-4})$ s). In Impact time, the liquid accelerates suddenly due to the impact. In Focusing time, the microjet emerges due to flow-focusing. In order to explain the sudden acceleration inside the tube in Impact time, we develop a physical model based on a pressure impulse approach. Numerical simulations confirm the proposed model, indicating that the basic mechanism of the acceleration of the liquid due to the impulsive force is elucidated. Remarkably, the viscous effect is negligible in Impact time. In contrast, in Focusing time, the viscosity plays an important role in the microjet generation. We experimentally and numerically investigate the velocity of microjets with various viscosities. We find that higher viscosities lead to reduction of the jet velocity, which can be described by using Reynolds number (the ratio between the inertia force and the viscous force). This novel device may be a starting point for next-generation technologies, such as high-viscosity inkjet printers including bioprinters and needle-free injection devices for minimally invasive medical treatments.
△ Less
Submitted 18 October, 2017;
originally announced October 2017.
-
Effects of pressure impulse and peak pressure of a shock wave on microjet velocity and the onset of cavitation in a microchannel
Authors:
Keisuke Hayasaka,
Akihito Kiyama,
Yoshiyuki Tagawa
Abstract:
The development of needle-free injection systems utilizing high-speed microjets is of great importance to world healthcare. It is thus crucial to control the microjets, which are often induced by underwater shock waves. In this contribution from fluid-mechanics point of view, we experimentally investigate the effect of a shock wave on the velocity of a free surface (microjet) and underwater cavita…
▽ More
The development of needle-free injection systems utilizing high-speed microjets is of great importance to world healthcare. It is thus crucial to control the microjets, which are often induced by underwater shock waves. In this contribution from fluid-mechanics point of view, we experimentally investigate the effect of a shock wave on the velocity of a free surface (microjet) and underwater cavitation onset in a microchannel, focusing on the pressure impulse and peak pressure of the shock wave. The shock wave used had a non-spherically-symmetric peak pressure distribution and a spherically symmetric pressure impulse distribution [Tagawa et al., J. Fluid Mech., 2016, 808, 5-18]. First, we investigate the effect of the shock wave on the jet velocity by installing a narrow tube and a hydrophone in different configurations in a large water tank, and measuring the shock wave pressure and the jet velocity simultaneously. The results suggest that the jet velocity depends only on the pressure impulse of the shock wave. We then investigate the effect of the shock wave on the cavitation onset by taking measurements in an L-shaped microchannel. The results suggest that the probability of cavitation onset depends only on the peak pressure of the shock wave. In addition, the jet velocity varies according to the presence or absence of cavitation. The above findings provide new insights for advancing a control method for high-speed microjets.
△ Less
Submitted 16 April, 2017; v1 submitted 14 March, 2017;
originally announced March 2017.
-
Optical-flow-based background-oriented schlieren technique for measuring a laser-induced underwater shock wave
Authors:
Keisuke Hayasaka,
Yoshiyuki Tagawa,
Tianshu Liu,
Masaharu Kameda
Abstract:
The background-oriented schlieren (BOS) technique with the physics-based optical flow method (OF-BOS) is developed for measuring the pressure field of a laser-induced underwater shock wave. Compared to BOS with the conventional cross-correlation method in PIV (called PIV-BOS), by using the OF-BOS, the displacement field generated by the small density gradient in water can be obtained at the spatia…
▽ More
The background-oriented schlieren (BOS) technique with the physics-based optical flow method (OF-BOS) is developed for measuring the pressure field of a laser-induced underwater shock wave. Compared to BOS with the conventional cross-correlation method in PIV (called PIV-BOS), by using the OF-BOS, the displacement field generated by the small density gradient in water can be obtained at the spatial resolution of one vector per pixel. The corresponding density and pressure fields can be further extracted. It is particularly demonstrated that the sufficiently high spatial resolution of the extracted displacement vector field is required in the tomographic reconstruction to correctly infer the pressure field of the spherical underwater shock wave. The capability of the OF-BOS is critically evaluated based on synchronized hydrophone measurements. Special emphasis is placed on direct comparison between the OF-BOS with the PIV-BOS.
△ Less
Submitted 1 October, 2016;
originally announced October 2016.
-
On pressure impulse of a laser-induced underwater shock wave
Authors:
Yoshiyuki Tagawa,
Shota Yamamoto,
Keisuke Hayasaka,
Masaharu Kameda
Abstract:
We experimentally examine a laser-induced underwater shock wave with a special attention to pressure impulse, the time integral of pressure evolution. %total pressure variation associated with the shock wave. Plasma formation, shock-wave expansion, and pressure in water are observed simultaneously using a combined measurement system that obtains high-resolution nanosecond-order image sequences. Th…
▽ More
We experimentally examine a laser-induced underwater shock wave with a special attention to pressure impulse, the time integral of pressure evolution. %total pressure variation associated with the shock wave. Plasma formation, shock-wave expansion, and pressure in water are observed simultaneously using a combined measurement system that obtains high-resolution nanosecond-order image sequences. These detailed measurements reveal a non-spherically-symmetric distribution of pressure peak. In contrast, remarkably, pressure impulse is found to distribute symmetrically for a wide range of experimental parameters even when the shock waves are emitted from an elongated region. The structure is determined to be a collection of multiple spherical shock waves originated from point-like plasmas in the elongated region.
△ Less
Submitted 1 October, 2016; v1 submitted 24 April, 2015;
originally announced April 2015.
-
Application of background-oriented schlieren (BOS) technique to a laser-induced underwater shock wave
Authors:
Shota Yamamoto,
Yoshiyuki Tagawa,
Masaharu Kameda
Abstract:
We build an ultra-high-speed imaging system based on the background-oriented schlieren (BOS) technique in order to capture a laser-induced underwater shock wave. This BOS technique is able to provide two-dimensional density-gradient field of fluid and requires a simple setup. The imaging system consists of an ultra-high speed video camera, a laser stroboscope, and a patterned background. This syst…
▽ More
We build an ultra-high-speed imaging system based on the background-oriented schlieren (BOS) technique in order to capture a laser-induced underwater shock wave. This BOS technique is able to provide two-dimensional density-gradient field of fluid and requires a simple setup. The imaging system consists of an ultra-high speed video camera, a laser stroboscope, and a patterned background. This system takes images every 0.2 $μ$s. Furthermore, since the density change of water disturbed by the shock is exceedingly small, the system has high spatial resolution $\sim$ 10 $μ$m/pixel. Using this BOS system, we examine temporal position of a shock wave. The position agrees well with that measured by conventional shadowgraph, which indicates that the high-speed imaging system can successfully capture the instantaneous position of the underwater shock wave that propagates with the speed of about 1500 m/s. The local density gradient can be determined up to $O$(10$^3$ kg/m$^4$), which is confirmed by the gradient estimated from the pressure time history measured by a hydrophone.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
A focused liquid jet formed by a water hammer in a test tube
Authors:
Akihito Kiyama,
Yoshiyuki Tagawa,
Keita Ando,
Masaharu Kameda
Abstract:
We investigate motion of a gas-liquid interface in a test tube induced by a large acceleration via impulsive force. We conduct simple experiments in which the tube partially filled with a liquid falls under gravity and impacts a rigid floor. A curved gas-liquid interface inside the tube reverses and eventually forms an elongated jet (i.e. the so-called a focused jet). In our experiments, there ari…
▽ More
We investigate motion of a gas-liquid interface in a test tube induced by a large acceleration via impulsive force. We conduct simple experiments in which the tube partially filled with a liquid falls under gravity and impacts a rigid floor. A curved gas-liquid interface inside the tube reverses and eventually forms an elongated jet (i.e. the so-called a focused jet). In our experiments, there arises either vibration of the interface or increment in the velocity of a liquid jet accompanied by the onset of cavitation in the liquid column. These phenomena cannot be explained by considering pressure impulse in a classical potential flow analysis, which does not account for finite speeds of sound as well as phase change. Here we model such water-hammer events as a result of one-dimensional pressure wave propagation and its interaction with boundaries through acoustic impedance mismatching. The method of characteristics is applied to describe pressure wave interactions and the subsequent cavitation. The proposed model is found to allow us to capture the unsteady features of the liquid jet.
△ Less
Submitted 18 February, 2015; v1 submitted 16 February, 2015;
originally announced February 2015.
-
Energy spectra in turbulent bubbly flows
Authors:
Vivek N. Prakash,
Julian Martinez Mercado,
Leen van Wijngaarden,
Ernesto Mancilla,
Yoshiyuki Tagawa,
Detlef Lohse,
Chao Sun
Abstract:
We conduct experiments in a turbulent bubbly flow to study the nature of the transition between the classical $-$5/3 energy spectrum scaling for a single-phase turbulent flow and the $-$3 scaling for a swarm of bubbles rising in a quiescent liquid and of bubble-dominated turbulence. The bubblance parameter, which measures the ratio of the bubble-induced kinetic energy to the kinetic energy induced…
▽ More
We conduct experiments in a turbulent bubbly flow to study the nature of the transition between the classical $-$5/3 energy spectrum scaling for a single-phase turbulent flow and the $-$3 scaling for a swarm of bubbles rising in a quiescent liquid and of bubble-dominated turbulence. The bubblance parameter, which measures the ratio of the bubble-induced kinetic energy to the kinetic energy induced by the turbulent liquid fluctuations before bubble injection, is often used to characterise the bubbly flow. We vary the bubblance parameter from $b = \infty$ (pseudo-turbulence) to $b = 0$ (single-phase flow) over 2-3 orders of magnitude ($0.01 - 5$) to study its effect on the turbulent energy spectrum and liquid velocity fluctuations. The probability density functions (PDFs) of the liquid velocity fluctuations show deviations from the Gaussian profile for $b > 0$, i.e. when bubbles are present in the system. The PDFs are asymmetric with higher probability in the positive tails. The energy spectra are found to follow the $-$3 scaling at length scales smaller than the size of the bubbles for bubbly flows. This $-$3 spectrum scaling holds not only in the well-established case of pseudo-turbulence, but surprisingly in all cases where bubbles are present in the system ($b > 0$). Therefore, it is a generic feature of turbulent bubbly flows, and the bubblance parameter is probably not a suitable parameter to characterise the energy spectrum in bubbly turbulent flows. The physical reason is that the energy input by the bubbles passes over only to higher wave numbers, and the energy production due to the bubbles can be directly balanced by the viscous dissipation in the bubble wakes as suggested by Lance $\&$ Bataille (1991). In addition, we provide an alternative explanation by balancing the energy production of the bubbles with viscous dissipation in the Fourier space.
△ Less
Submitted 26 January, 2016; v1 submitted 23 July, 2013;
originally announced July 2013.
-
Levitation of a drop over a moving surface
Authors:
Henri Lhuissier,
Yoshiyuki Tagawa,
Tuan Tran,
Chao Sun
Abstract:
We investigate the levitation of a drop gently deposited onto the inner wall of a rotating hollow cylinder. For a sufficient velocity of the wall, the drop steadily levitates over a thin air film and reaches a stable angular position in the cylinder, where the drag and lift balance the weight of the drop. Interferometric measurement yields the three-dimensional (3D) air film thickness under the dr…
▽ More
We investigate the levitation of a drop gently deposited onto the inner wall of a rotating hollow cylinder. For a sufficient velocity of the wall, the drop steadily levitates over a thin air film and reaches a stable angular position in the cylinder, where the drag and lift balance the weight of the drop. Interferometric measurement yields the three-dimensional (3D) air film thickness under the drop and reveals the asymmetry of the profile along the direction of the wall motion. A two-dimensional (2D) model is presented which explains the levitation mechanism, captures the main characteristics of the air film shape and predicts two asymptotic regimes for the film thickness $h_0$: For large drops $h_0\sim\ca^{2/3}κ_b^{-1}$, as in the Bretherton problem, where $\ca$ is the capillary number based on the air viscosity and $κ_b$ is the curvature at the bottom of the drop. For small drops $h_0\sim\ca^{4/5}(aκ_b)^{4/5}κ_b^{-1}$, where $a$ is the capillary length.
△ Less
Submitted 7 June, 2013;
originally announced June 2013.
-
The clustering morphology of freely rising deformable bubbles
Authors:
Yoshiyuki Tagawa,
Ivo Roghair,
Vivek N. Prakash,
Martin van Sint Annaland,
Hans Kuipers,
Chao Sun,
Detlef Lohse
Abstract:
We investigate the clustering morphology of a swarm of freely rising deformable bubbles. A three-dimensional Voronoï analysis enables us to quantitatively distinguish between two typical clustering configurations: preferential clustering and a grid-like structure. The bubble data is obtained from direct numerical simulations (DNS) using the front-tracking method. It is found that the bubble deform…
▽ More
We investigate the clustering morphology of a swarm of freely rising deformable bubbles. A three-dimensional Voronoï analysis enables us to quantitatively distinguish between two typical clustering configurations: preferential clustering and a grid-like structure. The bubble data is obtained from direct numerical simulations (DNS) using the front-tracking method. It is found that the bubble deformation, represented by the aspect ratio χ, plays a significant role in determining which type of clustering is realized: Nearly spherical bubbles with χ<~ 1.015 form a grid-like structure, while more deformed bubbles show preferential clustering. Remarkably, this criteria for the clustering morphology holds for different diameters of the bubbles, surface tension, and viscosity of the liquid in the studied parameter regime. The mechanism of this clustering behavior is connected to the amount of vorticity generated at the bubble surfaces.
△ Less
Submitted 4 December, 2012;
originally announced December 2012.
-
Needle-free injection into skin and soft matter with highly focused microjets
Authors:
Yoshiyuki Tagawa,
Nikolai Oudalov,
A. El Ghalbzouri,
Chao Sun,
Detlef Lohse
Abstract:
The development of needle-free drug injection systems is of great importance to global healthcare. However, in spite of its great potential and research history over many decades, these systems are not commonly used. One of the main problems is that existing methods use diffusive jets, which result in scattered penetration and severe deceleration of the jets, causing frequent pain and insufficient…
▽ More
The development of needle-free drug injection systems is of great importance to global healthcare. However, in spite of its great potential and research history over many decades, these systems are not commonly used. One of the main problems is that existing methods use diffusive jets, which result in scattered penetration and severe deceleration of the jets, causing frequent pain and insufficient penetration. Another longstanding challenge is the development of accurate small volume injections. In this paper we employ a novel method of needle-free drug injection, using highly-focused high speed microjets, which aims to solve these challenges. We experimentally demonstrate that these unique jets are able to penetrate human skin: the focused nature of these microjets creates an injection spot smaller than a mosquito's proboscis and guarantees a high percentage of the liquid being injected. The liquid substances can be delivered to a much larger depth than conventional methods, and create a well-controlled dispersion pattern. Thanks to the excellent controllability of the microjet, small volume injections become feasible. Furthermore, the penetration dynamics is studied through experiments performed on gelatin mixtures (human soft tissue equivalent) and human skin, agreeing well with a viscous stress model which we develop. This model predicts the depth of the penetration into both human skin and soft tissue. The results presented here take needle-free injections a step closer to widespread use.
△ Less
Submitted 15 October, 2012; v1 submitted 5 October, 2012;
originally announced October 2012.
-
Wall forces on a sphere in a rotating liquid-filled cylinder
Authors:
Yoshiyuki Tagawa,
Jarich van der Molen,
Leen van Wijngaarden,
Chao Sun
Abstract:
We experimentally study the behavior of a particle slightly denser than the surrounding liquid in solid body rotating flow. Earlier work revealed that a heavy particle has an unstable equilibrium point in unbounded rotation flows. In the confinement of the rotational flow by a cylindrical wall a heavy sphere with density 1.05 g/cm$^3$ describes an orbital motion in our experiments. This is due to…
▽ More
We experimentally study the behavior of a particle slightly denser than the surrounding liquid in solid body rotating flow. Earlier work revealed that a heavy particle has an unstable equilibrium point in unbounded rotation flows. In the confinement of the rotational flow by a cylindrical wall a heavy sphere with density 1.05 g/cm$^3$ describes an orbital motion in our experiments. This is due to the effect of the wall near the sphere, i.e. a repulsive force ($F_w$). We model $F_w$ on the sphere as a function of the distance from the wall ($L$): $F_W \propto L^{-4}$ as proposed by Takemura and Magnaudet (2003). Remarkably, the path from the model including $F_w$ reproduce the experimentally measured trajectory. In addition during an orbital motion the particle does not spin around its axis, and we provide a possible explanation for this phenomenon.
△ Less
Submitted 5 September, 2012; v1 submitted 4 September, 2012;
originally announced September 2012.
-
Microdroplet impact at very high velocity
Authors:
Claas Willem Visser,
Yoshiyuki Tagawa,
Chao Sun,
Detlef Lohse
Abstract:
Water microdroplet impact at velocities up to 100 m/s for droplet diameters from 12 to 100 um is studied. This parameter range covers the transition from capillary-limited to viscosity-limited spreading of the impacting droplet. Splashing is absent for all measurements; the droplets always gently spread over the surface. The maximum spreading radius is compared to several existing models. The mode…
▽ More
Water microdroplet impact at velocities up to 100 m/s for droplet diameters from 12 to 100 um is studied. This parameter range covers the transition from capillary-limited to viscosity-limited spreading of the impacting droplet. Splashing is absent for all measurements; the droplets always gently spread over the surface. The maximum spreading radius is compared to several existing models. The model by Pasandideh-Fard et al. agrees well with the measured data, indicating the importance of a thin boundary layer just above the surface, in which most of the viscous dissipation in the spreading droplet takes place. As explained by the initial air layer under the impacting droplet, a contact angle of 180 degrees is used as model input.
△ Less
Submitted 8 June, 2012; v1 submitted 7 June, 2012;
originally announced June 2012.
-
How gravity and size affect the acceleration statistics of bubbles in turbulence
Authors:
Vivek N. Prakash,
Yoshiyuki Tagawa,
Enrico Calzavarini,
Julian Martinez Mercado,
Federico Toschi,
Detlef Lohse,
Chao Sun
Abstract:
We report results from the first systematic Lagrangian experimental investigation in the regime of very light (air bubbles in water) and large particles (D/η >> 1) in turbulence. Using a traversing camera setup and particle tracking, we study the Lagrangian acceleration statistics of ~3 mm diameter (D) bubbles in a water tunnel with nearly homogeneous and isotropic turbulence generated by an activ…
▽ More
We report results from the first systematic Lagrangian experimental investigation in the regime of very light (air bubbles in water) and large particles (D/η >> 1) in turbulence. Using a traversing camera setup and particle tracking, we study the Lagrangian acceleration statistics of ~3 mm diameter (D) bubbles in a water tunnel with nearly homogeneous and isotropic turbulence generated by an active-grid. The Reynolds number (Re_λ) is varied from 145 to 230, resulting in size ratios, D/η in the range of 7.3--12.5, where η is the Kolmogorov length scale. The experiments reveal that gravity increases the acceleration variance and reduces the intermittency of the PDF in the vertical direction. Once the gravity offset is subtracted, the variances of both the horizontal and vertical acceleration components are about 5\pm2 times larger than the one measured in the same flow for fluid tracers. Moreover, for these light particles, the experimental acceleration PDF shows a substantial reduction in intermittency at growing size ratios, in contrast to neutrally buoyant or heavy particles. All these results are closely matched by numerical simulations of finite-size bubbles with the Faxén corrections.
△ Less
Submitted 19 July, 2012; v1 submitted 18 April, 2012;
originally announced April 2012.
-
Highly focused supersonic microjets: numerical simulations
Authors:
Ivo R. Peters,
Yoshiyuki Tagawa,
Nikolai Oudalov,
Chao Sun,
Andrea Prosperetti,
Detlef Lohse,
Devaraj van der Meer
Abstract:
By focusing a laser pulse inside a capillary partially filled with liquid, a vapour bubble is created which emits a pressure wave. This pressure wave travels through the liquid and creates a fast, focused axisymmetric microjet when it is reflected at the meniscus. We numerically investigate the formation of this microjet using axisymmetric boundary-integral simulations, where we model the pressure…
▽ More
By focusing a laser pulse inside a capillary partially filled with liquid, a vapour bubble is created which emits a pressure wave. This pressure wave travels through the liquid and creates a fast, focused axisymmetric microjet when it is reflected at the meniscus. We numerically investigate the formation of this microjet using axisymmetric boundary-integral simulations, where we model the pressure wave as a pressure pulse applied on the bubble. We find a good agreement between the simulations and experimental results in terms of the time evolution of the jet and on all parameters that can be compared directly. We present a simple analytical model that accurately predicts the velocity of the jet after the pressure pulse and its maximum velocity.
△ Less
Submitted 27 September, 2012; v1 submitted 22 March, 2012;
originally announced March 2012.
-
Highly focused supersonic microjets
Authors:
Yoshiyuki Tagawa,
Nikolai Oudalov,
Claas Willem Visser,
Ivo R. Peters,
Deveraj van der Meer,
Chao Sun,
Andrea Prosperetti,
Detlef Lohse
Abstract:
The paper describes the production of thin, focused microjets with velocities up to 850 m/s by the rapid vaporization of a small mass of liquid in an open liquid-filled capillary. The vaporization is caused by the absorption of a low-energy laser pulse. A likely explanation of the observed phenomenon is based on the im**ement of the shock wave caused by the nearly-instantaneous vaporization on t…
▽ More
The paper describes the production of thin, focused microjets with velocities up to 850 m/s by the rapid vaporization of a small mass of liquid in an open liquid-filled capillary. The vaporization is caused by the absorption of a low-energy laser pulse. A likely explanation of the observed phenomenon is based on the im**ement of the shock wave caused by the nearly-instantaneous vaporization on the free surface of the liquid. An experimental study of the dependence of the jet velocity on several parameters is conducted, and a semi-empirical relation for its prediction is developed. The coherence of the jets, their high velocity and good reproducibility and controllability are unique features of the system described. A possible application is to the development of needle-free drug injection systems which are of great importance for global health care.
△ Less
Submitted 27 April, 2012; v1 submitted 12 December, 2011;
originally announced December 2011.
-
Lagrangian statistics of light particles in turbulence
Authors:
Julian Martinez Mercado,
Vivek N. Prakash,
Yoshiyuki Tagawa,
Chao Sun,
Detlef Lohse
Abstract:
We study the Lagrangian velocity and acceleration statistics of light particles (micro-bubbles in water) in homogeneous isotropic turbulence. Micro-bubbles with a diameter of 340 microns and Stokes number from 0.02 to 0.09 are dispersed in a turbulent water tunnel operated at Taylor-Reynolds numbers (Re) ranging from 160 to 265. We reconstruct the bubble trajectories by employing three-dimensional…
▽ More
We study the Lagrangian velocity and acceleration statistics of light particles (micro-bubbles in water) in homogeneous isotropic turbulence. Micro-bubbles with a diameter of 340 microns and Stokes number from 0.02 to 0.09 are dispersed in a turbulent water tunnel operated at Taylor-Reynolds numbers (Re) ranging from 160 to 265. We reconstruct the bubble trajectories by employing three-dimensional particle tracking velocimetry (PTV). It is found that the probability density functions (PDFs) of the micro-bubble acceleration show a highly non-Gaussian behavior with flatness values in the range 23-30. The acceleration flatness values show an increasing trend with Re, consistent with previous experiments (Voth et al., JFM, 2002) and numerics (Ishihara et al., JFM, 2007). These acceleration PDFs show a higher intermittency compared to tracers (Ayyalasomayajula et al., Phys. Fluids, 2008) and heavy particles (Ayyalasomayajula et al., Phys. Rev. Lett., 2006) in wind tunnel experiments. In addition, the micro-bubble acceleration autocorrelation function decorrelates slower with increasing Re. We also compare our results with experiments in von Karman flows and point-particle direct numerical simulations with periodic boundary conditions.
△ Less
Submitted 6 February, 2012; v1 submitted 1 September, 2011;
originally announced September 2011.
-
Three-dimensional Lagrangian Voronoi analysis for clustering of particles and bubbles in turbulence
Authors:
Yoshiyuki Tagawa,
Julian Martinez Mercado,
Vivek N. Prakash,
Enrico Calzavarini,
Chao Sun,
Detlef Lohse
Abstract:
Three-dimensional Voronoi analysis is used to quantify the clustering of inertial particles in homogeneous isotropic turbulence using data from numerics and experiments. We study the clustering behavior at different density ratios and particle response times (i.e. Stokes numbers St). The Probability Density Functions (PDFs) of the Voronoi cell volumes of light and heavy particles show a different…
▽ More
Three-dimensional Voronoi analysis is used to quantify the clustering of inertial particles in homogeneous isotropic turbulence using data from numerics and experiments. We study the clustering behavior at different density ratios and particle response times (i.e. Stokes numbers St). The Probability Density Functions (PDFs) of the Voronoi cell volumes of light and heavy particles show a different behavior from that of randomly distributed particles -i.e. fluid tracers-implying that clustering is present. The standard deviation of the PDF normalized by that of randomly distributed particles is used to quantify the clustering. Light particles show maximum clustering for St around 1-2. The results are consistent with previous investigations employing other approaches to quantify the clustering. We also present the joint PDFs of enstrophy and Voronoi volumes and their Lagrangian autocorrelations. The small Voronoi volumes of light particles correspond to regions of higher enstrophy than those of heavy particles, indicating that light particles cluster in higher vorticity regions. The Lagrangian temporal autocorrelation function of Voronoi volumes shows that the clustering of light particles lasts much longer than that of heavy or neutrally buoyant particles. Due to inertial effects, the Lagrangian autocorrelation time-scale of clustered light particles is even longer than that of the enstrophy of the flow itself.
△ Less
Submitted 10 February, 2012; v1 submitted 13 April, 2011;
originally announced April 2011.
