-
Pilot bunch and co-magnetometry of polarized particles stored in a ring
Authors:
J. Slim,
F. Rathmann,
A. Andres,
V. Hejny,
A. Nass,
A. Kacharava,
P. Lenisa,
N. N. Nikolaev,
J. Pretz,
A. Saleev,
V. Shmakova,
H. Soltner,
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi,
L. Barion,
I. Bekman,
M. Beyß,
C. Böhme,
B. Breitkreutz,
N. Canale,
G. Ciullo,
S. Dymov,
N. -O. Fröhlich
, et al. (38 additional authors not shown)
Abstract:
In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) on…
▽ More
In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) one of the bunches stored in the ring from the high-frequency fields of the spin rotator, so that the masked pilot bunch acts as a co-magnetometer for the other signal bunch, tracking fluctuations in the ring on a time scale of about one second. While the new method was developed primarily for searches of electric dipole moments of charged particles, it may have far-reaching implications for future spin physics facilities, such as the EIC and NICA.
△ Less
Submitted 16 September, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
Spin decoherence and off-resonance behavior of radiofrequency-driven spin rotations in storage rings
Authors:
N. N. Nikolaev,
F. Rathmann,
J. Slim,
A. Andres,
V. Hejny,
A. Nass,
A. Kacharava,
P. Lenisa,
J. Pretz,
A. Saleev,
V. Shmakova,
H. Soltner,
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi,
L. Barion,
I. Bekman,
M. Beyß,
C. Böhme,
B. Breitkreutz,
N. Canale,
G. Ciullo,
S. Dymov,
N. -O. Fröhlich
, et al. (38 additional authors not shown)
Abstract:
Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of…
▽ More
Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of detuning the exact spin resonance on the vertical and the in-plane precessing components of the polarization. An important part of the formalism presented here is the consideration of experimentally relevant spin-decoherence effects. We discuss applications of the developed formalism to the interpretation of the experimental data on the novel pilot bunch approach to control the spin-resonance condition during the operation of the radiofrequency-driven Wien filter that is used as a spin rotator in the first direct deuteron electric dipole moment measurement at COSY. We emphasize the potential importance of the hitherto unexplored phase of the envelope of the horizontal polarization as an indicator of the stability of the radiofrequency-driven spin rotations in storage rings. The work presented here serves as a satellite publication to the work published concurrently on the proof of principle experiment about the so-called pilot bunch approach that was developed to provide co-magnetometry for the deuteron electric dipole moment experiment at COSY.
△ Less
Submitted 16 September, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
A New Beam Polarimeter at COSY to Search for Electric Dipole Moments of Charged Particles
Authors:
F. Müller,
O. Javakhishvili,
D. Shergelashvili,
I. Keshelashvili,
D. Mchedlishvili,
F. Abusaif,
A. Aggarwal,
L. Barion,
S. Basile,
J. Böker,
N. Canale,
G. Ciullo,
S. Dymov,
O. Felden,
M. Gagoshidze,
R. Gebel,
N. Demary,
K. Grigoryev,
D. Grzonka,
T. Hahnraths,
V. Hejny,
A. Kacharava,
V. Kamerdzhiev,
S. Karanth,
A. Kulikov
, et al. (31 additional authors not shown)
Abstract:
A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum Jülich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an ED…
▽ More
A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum Jülich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an EDM search. The search requires a polarimeter with high efficiency, large analyzing power, and stable operating characteristics. With typical beam momenta of about 1 GeV/c, the scattering of protons or deuterons from a carbon target into forward angles becomes a nearly optimal choice of an analyzing reaction. The polarimeter described here consists of 52 LYSO detector modules, arranged in 4 symmetric blocks (up, down, left, right) for energy determination behind plastic scintillators for particle identification via energy loss. The commissioning results of the current setup demonstrate that the polarimeter is ready to be employed in a first direct search for an EDM on the deuteron, which is planned at COSY in the next two years.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Beam-based alignment at the Cooler Synchrotron COSY as a prerequisite for an electric dipole moment measurement
Authors:
T. Wagner,
A. Nass,
J. Pretz,
F. Abusaif,
A. Aggarwal,
A. Andres,
I. Bekman,
N. Canale,
I. Ciepal,
G. Ciullo,
F. Dahmen,
S. Dymov,
C. Ehrlich,
R. Gebel,
K. Grigoryev,
D. Grzonka,
V. Hejny,
J. Hetzel,
A. Kacharava,
V. Kamerdzhiev,
S. Karanth,
I. Keshelashvili,
A. Kononov,
A. Kulikov,
K. Laiham
, et al. (25 additional authors not shown)
Abstract:
The Jülich Electric Dipole moment Investigation (JEDI) collaboration aims at a direct measurement of the Electric Dipole Moment (EDM) of protons and deuterons using a storage ring. The measurement is based on a polarization measurement. In order to reach highest accuracy, one has to know the exact trajectory through the magnets, especially the quadrupoles, to avoid the influence of magnetic fields…
▽ More
The Jülich Electric Dipole moment Investigation (JEDI) collaboration aims at a direct measurement of the Electric Dipole Moment (EDM) of protons and deuterons using a storage ring. The measurement is based on a polarization measurement. In order to reach highest accuracy, one has to know the exact trajectory through the magnets, especially the quadrupoles, to avoid the influence of magnetic fields on the polarization vector. In this paper, the development of a beam-based alignment technique is described that was developed and implemented at the COoler SYnchrotron (COSY) at Forschungszentrum Jülich. Well aligned quadrupoles permit one to absolutely calibrate the Beam Position Monitors (BPMs). The method is based on the fact that a particle beam, which does not pass through the center of a quadrupole, experiences a deflection. The precision reached by the method is approximately 40 micro meter. Some consequences for the design of a new high precision storage ring for EDM mesasurements are discussed.
△ Less
Submitted 16 December, 2020; v1 submitted 4 September, 2020;
originally announced September 2020.
-
Storage Ring to Search for Electric Dipole Moments of Charged Particles -- Feasibility Study
Authors:
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi-Esuain,
A. Andres,
A. Atanasov,
L. Barion,
S. Basile,
M. Berz,
C. Böhme,
J. Böker,
J. Borburgh,
N. Canale,
C. Carli,
I. Ciepał,
G. Ciullo,
M. Contalbrigo,
J. -M. De Conto,
S. Dymov,
O. Felden,
M. Gaisser,
R. Gebel,
N. Giese,
J. Gooding,
K. Grigoryev
, et al. (76 additional authors not shown)
Abstract:
The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisatio…
▽ More
The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisation, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarisation from the longitudinal to the vertical direction. The slow rise in the vertical polarisation component, detected through scattering from a target, signals the EDM.
The project strategy is outlined. A stepwise plan is foreseen, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal plane polarization lifetimes, and control of the polarization direction through feedback from scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally a high-precision electric-field storage ring.
△ Less
Submitted 25 June, 2021; v1 submitted 17 December, 2019;
originally announced December 2019.
-
Feasibility Study for an EDM Storage Ring
Authors:
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi-Esuain,
L. Barion,
S. Basile,
M. Berz,
M. Beyß,
C. Böhme,
J. Böker,
J. Borburgh,
C. Carli,
I. Ciepał,
G. Ciullo,
M. Contalbrigo,
J. -M. De Conto,
S. Dymov,
R. Engels,
O. Felden,
M. Gagoshidze,
M. Gaisser,
R. Gebel,
N. Giese,
K. Grigoryev,
D. Grzonka
, et al. (70 additional authors not shown)
Abstract:
This project exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM, $\vec d$) aligned along the particle spin axis. Statistical sensitivities can approach $10^{-29}$~e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarizati…
▽ More
This project exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM, $\vec d$) aligned along the particle spin axis. Statistical sensitivities can approach $10^{-29}$~e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarization, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarization ($\vec d \times\vec E$). The slow rise in the vertical polarization component, detected through scattering from a target, signals the EDM. The project strategy is outlined. It foresees a step-wise plan, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal-plane polarization lifetimes, and control of the polarization direction through feedback from the scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally the high precision electric-field storage ring.
△ Less
Submitted 18 January, 2019; v1 submitted 20 December, 2018;
originally announced December 2018.
-
Phase Measurement for Driven Spin Oscillations in a Storage Ring
Authors:
N. Hempelmann,
V. Hejny,
J. Pretz,
H. Soltner,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
L. Barion,
M. Berz,
S. Chekmenev,
G. Ciullo,
S. Dymov,
D. Eversmann,
M. Gaisser,
R. Gebel,
K. Grigoryev,
D. Grzonka,
G. Guidoboni,
D. Heberling,
J. Hetzel,
F. Hinder,
A. Kacharava,
V. Kamerdzhiev,
I. Keshelashvili,
I. Koop
, et al. (43 additional authors not shown)
Abstract:
This paper reports the first simultaneous measurement of the horizontal and vertical components of the polarization vector in a storage ring under the influence of a radio frequency (rf) solenoid. The experiments were performed at the Cooler Synchrotron COSY in Jülich using a vector polarized, bunched $0.97\,\textrm{GeV/c}$ deuteron beam. Using the new spin feedback system, we set the initial phas…
▽ More
This paper reports the first simultaneous measurement of the horizontal and vertical components of the polarization vector in a storage ring under the influence of a radio frequency (rf) solenoid. The experiments were performed at the Cooler Synchrotron COSY in Jülich using a vector polarized, bunched $0.97\,\textrm{GeV/c}$ deuteron beam. Using the new spin feedback system, we set the initial phase difference between the solenoid field and the precession of the polarization vector to a predefined value. The feedback system was then switched off, allowing the phase difference to change over time, and the solenoid was switched on to rotate the polarization vector. We observed an oscillation of the vertical polarization component and the phase difference. The oscillations can be described using an analytical model. The results of this experiment also apply to other rf devices with horizontal magnetic fields, such as Wien filters. The precise manipulation of particle spins in storage rings is a prerequisite for measuring the electric dipole moment (EDM) of charged particles.
△ Less
Submitted 24 April, 2018; v1 submitted 10 January, 2018;
originally announced January 2018.
-
Phase locking the spin precession in a storage ring
Authors:
N. Hempelmann,
V. Hejny,
J. Pretz,
E. Stephenson,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
L. Barion,
M. Berz,
S. Chekmenev,
G. Ciullo,
S. Dymov,
F. -J. Etzkorn,
D. Eversmann,
M. Gaisser,
R. Gebel,
K. Grigoryev,
D. Grzonka,
G. Guidoboni,
T. Hanraths,
D. Heberling,
J. Hetzel,
F. Hinder,
A. Kacharava,
V. Kamerdzhiev
, et al. (44 additional authors not shown)
Abstract:
This letter reports the successful use of feedback from a spin polarization measurement to the revolution frequency of a 0.97 GeV/$c$ bunched and polarized deuteron beam in the Cooler Synchrotron (COSY) storage ring in order to control both the precession rate ($\approx 121$ kHz) and the phase of the horizontal polarization component. Real time synchronization with a radio frequency (rf) solenoid…
▽ More
This letter reports the successful use of feedback from a spin polarization measurement to the revolution frequency of a 0.97 GeV/$c$ bunched and polarized deuteron beam in the Cooler Synchrotron (COSY) storage ring in order to control both the precession rate ($\approx 121$ kHz) and the phase of the horizontal polarization component. Real time synchronization with a radio frequency (rf) solenoid made possible the rotation of the polarization out of the horizontal plane, yielding a demonstration of the feedback method to manipulate the polarization. In particular, the rotation rate shows a sinusoidal function of the horizontal polarization phase (relative to the rf solenoid), which was controlled to within a one standard deviation range of $σ= 0.21$ rad. The minimum possible adjustment was 3.7 mHz out of a revolution frequency of 753 kHz, which changes the precession rate by 26 mrad/s. Such a capability meets a requirement for the use of storage rings to look for an intrinsic electric dipole moment of charged particles.
△ Less
Submitted 6 July, 2017; v1 submitted 22 March, 2017;
originally announced March 2017.
-
Spin tune map** as a novel tool to probe the spin dynamics in storage rings
Authors:
A. Saleev,
N. N. Nikolaev,
F. Rathmann,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
M. Berz,
S. Chekmenev,
G. Ciullo,
S. Dymov,
D. Eversmann,
M. Gaisser,
R. Gebel,
K. Grigoryev,
D. Grzonka,
G. Guidoboni,
D. Heberling,
N. Hempelmann,
V. Hejny,
J. Hetzel,
F. Hinder,
A. Kacharava,
V. Kamerdzhiev,
I. Keshelashvili,
I. Koop
, et al. (39 additional authors not shown)
Abstract:
Precision experiments, such as the search for electric dipole moments of charged particles using storage rings, demand for an understanding of the spin dynamics with unprecedented accuracy. The ultimate aim is to measure the electric dipole moments with a sensitivity up to 15 orders in magnitude better than the magnetic dipole moment of the stored particles. This formidable task requires an unders…
▽ More
Precision experiments, such as the search for electric dipole moments of charged particles using storage rings, demand for an understanding of the spin dynamics with unprecedented accuracy. The ultimate aim is to measure the electric dipole moments with a sensitivity up to 15 orders in magnitude better than the magnetic dipole moment of the stored particles. This formidable task requires an understanding of the background to the signal of the electric dipole from rotations of the spins in the spurious magnetic fields of a storage ring. One of the observables, especially sensitive to the imperfection magnetic fields in the ring is the angular orientation of stable spin axis. Up to now, the stable spin axis has never been determined experimentally, and in addition, the JEDI collaboration for the first time succeeded to quantify the background signals that stem from false rotations of the magnetic dipole moments in the horizontal and longitudinal imperfection magnetic fields of the storage ring. To this end, we developed a new method based on the spin tune response of a machine to artificially applied longitudinal magnetic fields. This novel technique, called \textit{spin tune map**}, emerges as a very powerful tool to probe the spin dynamics in storage rings. The technique was experimentally tested in 2014 at the cooler synchrotron COSY, and for the first time, the angular orientation of the stable spin axis at two different locations in the ring has been determined to an unprecedented accuracy of better than $2.8μ$rad.
△ Less
Submitted 8 March, 2017; v1 submitted 3 March, 2017;
originally announced March 2017.
-
New method for a continuous determination of the spin tune in storage rings and implications for precision experiments
Authors:
D. Eversmann,
V. Hejny,
F. Hinder,
A. Kacharava,
J. Pretz,
F. Rathmann,
M. Rosenthal,
F. Trinkel,
S. Andrianov,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
W. Bernreuther,
S. Bertelli,
M. Berz,
J. Bsaisou,
S. Chekmenev,
D. Chiladze,
G. Ciullo,
M. Contalbrigo,
J. de Vries,
S. Dymov,
R. Engels,
F. M. Esser,
O. Felden
, et al. (76 additional authors not shown)
Abstract:
A new method to determine the spin tune is described and tested. In an ideal planar magnetic ring, the spin tune - defined as the number of spin precessions per turn - is given by $ν_s = γG$ (gamma is the Lorentz factor, $G$ the magnetic anomaly). For 970 MeV/c deuterons coherently precessing with a frequency of ~120 kHz in the Cooler Synchrotron COSY, the spin tune is deduced from the up-down asy…
▽ More
A new method to determine the spin tune is described and tested. In an ideal planar magnetic ring, the spin tune - defined as the number of spin precessions per turn - is given by $ν_s = γG$ (gamma is the Lorentz factor, $G$ the magnetic anomaly). For 970 MeV/c deuterons coherently precessing with a frequency of ~120 kHz in the Cooler Synchrotron COSY, the spin tune is deduced from the up-down asymmetry of deuteron carbon scattering. In a time interval of 2.6 s, the spin tune was determined with a precision of the order $10^{-8}$, and to $1 \cdot 10^{-10}$ for a continuous 100 s accelerator cycle. This renders the presented method a new precision tool for accelerator physics: controlling the spin motion of particles to high precision is mandatory, in particular, for the measurement of electric dipole moments of charged particles in a storage ring.
△ Less
Submitted 21 March, 2017; v1 submitted 2 April, 2015;
originally announced April 2015.
-
Toward polarized antiprotons: Machine development for spin-filtering experiments
Authors:
C. Weidemann,
F. Rathmann,
H. J. Stein,
B. Lorentz,
Z. Bagdasarian,
L. Barion,
S. Barsov,
U. Bechstedt,
S. Bertelli,
D. Chiladze,
G. Ciullo,
M. Contalbrigo,
S. Dymov,
R. Engels,
M. Gaisser,
R. Gebel,
P. Goslawski,
K. Grigoriev,
G. Guidoboni,
A. Kacharava,
V. Kamerdzhiev,
A. Khoukaz,
A. Kulikov,
A. Lehrach,
P. Lenisa
, et al. (32 additional authors not shown)
Abstract:
The paper describes the commissioning of the experimental equipment and the machine studies required for the first spin-filtering experiment with protons at a beam kinetic energy of $49.3\,$MeV in COSY. The implementation of a low-$β$ insertion made it possible to achieve beam lifetimes of $τ_{\rm{b}}=8000\,$s in the presence of a dense polarized hydrogen storage-cell target of areal density…
▽ More
The paper describes the commissioning of the experimental equipment and the machine studies required for the first spin-filtering experiment with protons at a beam kinetic energy of $49.3\,$MeV in COSY. The implementation of a low-$β$ insertion made it possible to achieve beam lifetimes of $τ_{\rm{b}}=8000\,$s in the presence of a dense polarized hydrogen storage-cell target of areal density $d_{\rm t}=(5.5\pm 0.2)\times 10^{13}\,\mathrm{atoms/cm^{2}}$. The developed techniques can be directly applied to antiproton machines and allow for the determination of the spin-dependent $\bar{p}p$ cross sections via spin filtering.
△ Less
Submitted 9 March, 2015; v1 submitted 24 July, 2014;
originally announced July 2014.
-
Technical Design Report of the Inner Tracker for the KLOE-2 experiment
Authors:
KLOE-2 Collaboration,
:,
F. Archilli,
D. Badoni,
D. Babusci,
G. Bencivenni,
C. Bini,
C. Bloise,
V. Bocci,
F. Bossi,
P. Branchini,
A. Budano,
S. A. Bulychjev,
P. Campana,
G. Capon,
F. Ceradini,
P. Ciambrone,
E. Czerwinski,
E. Danè,
E. De Lucia,
G. De Robertis,
A. De Santis,
G. De Zorzi,
A. Di Domenico,
C. Di Donato
, et al. (59 additional authors not shown)
Abstract:
The technical design report of the Inner Tracker for the KLOE-2 experiment is presented
The technical design report of the Inner Tracker for the KLOE-2 experiment is presented
△ Less
Submitted 12 February, 2010;
originally announced February 2010.
-
Influence of the bin-to-bin and inside bin correlations on measured quantities
Authors:
V. Perevoztchikov,
M. Tabidze,
A. Tomaradze
Abstract:
A new method for measuring the quantities influenced by bin-to-bin and inside bin correlations is presented. This method is essential for large multiplisity and/or high density of particles in phase spase. The method was applied to the two particle correation functions of e+e- -> W+W- events.
A new method for measuring the quantities influenced by bin-to-bin and inside bin correlations is presented. This method is essential for large multiplisity and/or high density of particles in phase spase. The method was applied to the two particle correation functions of e+e- -> W+W- events.
△ Less
Submitted 24 June, 2003;
originally announced June 2003.
