-
The hidden uncertainties in particle balance calculations and their implications for assessment of plasma performance
Authors:
A. A. Teplukhina,
F. M. Poli,
M. Podesta,
M. Gorelenkova,
G. Szepesi,
Ye. O. Kazakov,
Y. Baranov,
Z. Stancar,
the JET Contributors
Abstract:
Predictive simulations of mixed plasma discharges, like deuterium-tritium plasmas, rely on self-consistent models for particle transport. These models have to be validated with interpretive analysis of existing experiments. Accounting for uncertainties in the particle balance equation is important for modelling of mixed-plasma discharges because simulation results are directly affected by plasma c…
▽ More
Predictive simulations of mixed plasma discharges, like deuterium-tritium plasmas, rely on self-consistent models for particle transport. These models have to be validated with interpretive analysis of existing experiments. Accounting for uncertainties in the particle balance equation is important for modelling of mixed-plasma discharges because simulation results are directly affected by plasma composition. JET deuterium and mixed hydrogen-deuterium plasma discharges heated by neutral beams only are analysed with the TRANSP code. Influence of prescribed quantities and terms entering into the particle balance equation is quantitatively assessed on the computed plasma parameters, in particular on the neutron rate and the plasma energy. Large uncertainties in the prescribed ion temperature, plasma rotation and impurity content might result in a noticeable over- or underestimate of the computed neutron rate. A significant difference in the time evolution of the measured and computed neutron rate is observed in the interpretive simulations if same diffusivity for electrons and thermal ions is assumed. Increased thermal deuterium ion transport is required to reach agreement with the plasma composition measured at the plasma edge and the measured neutron rate. Thermal ion density computed with the particle balance equation is mostly affected by the ion outflux term.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Application of Gaussian process regression to plasma turbulent transport model validation via integrated modelling
Authors:
Aaron Ho,
Jonathan Citrin,
Fulvio Auriemma,
Clarisse Bourdelle,
Francis J. Casson,
Hyun-Tae Kim,
Pierre Manas,
Gabor Szepesi,
Henri Weisen,
JET Contributors
Abstract:
This paper outlines an approach towards improved rigour in tokamak turbulence transport model validation within integrated modelling. Gaussian process regression (GPR) techniques were applied for profile fitting during the preparation of integrated modelling simulations allowing for rigourous sensitivity tests of prescribed initial and boundary conditions as both fit and derivative uncertainties a…
▽ More
This paper outlines an approach towards improved rigour in tokamak turbulence transport model validation within integrated modelling. Gaussian process regression (GPR) techniques were applied for profile fitting during the preparation of integrated modelling simulations allowing for rigourous sensitivity tests of prescribed initial and boundary conditions as both fit and derivative uncertainties are provided. This was demonstrated by a JETTO integrated modelling simulation of the JET ITER-like-wall H-mode baseline discharge #92436 with the QuaLiKiz quasilinear turbulent transport model, which is the subject of extrapolation towards a deuterium-tritium plasma. The simulation simultaneously evaluates the time evolution of heat, particle, and momentum fluxes over $\sim10$ confinement times, with a simulation boundary condition at $ρ_{tor} = 0.85$. Routine inclusion of momentum transport prediction in multi-channel flux-driven transport modelling is not standard and is facilitated here by recent developments within the QuaLiKiz model. Excellent agreement was achieved between the fitted and simulated profiles for $n_e$, $T_e$, $T_i$, and $Ω_{tor}$ within $2σ$, but the simulation underpredicts the mid-radius $T_i$ and overpredicts the core $n_e$ and $T_e$ profiles for this discharge. Despite this, it was shown that this approach is capable of deriving reasonable inputs, including derivative quantities, to tokamak models from experimental data. Furthermore, multiple figures-of-merit were defined to quantitatively assess the agreement of integrated modelling predictions to experimental data within the GPR profile fitting framework.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
-
New plasma regimes with small ELMs and high confinement at the Joint European Torus
Authors:
J. Garcia,
E. de la Luna,
M. Sertoli,
F. Casson,
S. Mazzi,
Z. Stancar,
G. Szepesi,
D. Frigione,
L. Garzotti,
F. Rimini,
D. van Eester,
P. Lomas,
C. Sozzi,
R. N. Aiba,
R. Coelho,
L. Frasinetti,
G. Huijsmans,
F. Liu
Abstract:
New plasma regimes with high confinement, low core impurity accumulation and small Edge localized mode (ELMs) perturbations have been obtained close to ITER conditions in magnetically confined plasmas from the Joint European torus (JET) tokamak. Such regimes are achieved by means of optimized particle fuelling conditions which trigger a self-organize state with a strong increase in rotation and io…
▽ More
New plasma regimes with high confinement, low core impurity accumulation and small Edge localized mode (ELMs) perturbations have been obtained close to ITER conditions in magnetically confined plasmas from the Joint European torus (JET) tokamak. Such regimes are achieved by means of optimized particle fuelling conditions which trigger a self-organize state with a strong increase in rotation and ion temperature and a decrease of the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with metallic wall environment such as the ones expected in ITER
△ Less
Submitted 8 March, 2021; v1 submitted 3 March, 2021;
originally announced March 2021.
-
Towards enhanced performance in fusion plasmas via turbulence suppression by MeV ions
Authors:
S. Mazzi,
J. Garcia,
D. Zarzoso,
Ye. O. Kazakov,
J. Ongena,
M. Nocente,
M. Dreval,
Z. Stancar,
G. Szepesi,
J. Eriksson,
A. Sahlberg,
S. Benkadda
Abstract:
Megaelectron volt (MeV) alpha particles will be the main source of plasma heating in magnetic confinement fusion reactors. Yet, instead of heating fuel ions, most of the energy of alpha particles is transferred to electrons. Furthermore, alpha particles can also excite Alfvenic instabilities, previously considered as detrimental. Contrary to expectations, we demonstrate efficient ion heating in th…
▽ More
Megaelectron volt (MeV) alpha particles will be the main source of plasma heating in magnetic confinement fusion reactors. Yet, instead of heating fuel ions, most of the energy of alpha particles is transferred to electrons. Furthermore, alpha particles can also excite Alfvenic instabilities, previously considered as detrimental. Contrary to expectations, we demonstrate efficient ion heating in the presence of MeV ions and strong fast-ion driven Alfvenic instabilities in recent experiments on the Joint European Torus (JET). Detailed transport analysis of these experiments with state-of-the-art modeling tools explains the observations. Here we show a novel type of turbulence suppression and improved energy insulation in plasmas with MeV ions and fully developed Alfvenic activities through a complex multi-scale mechanism that generates large-scale zonal flows. This mechanism holds promise for a more economical operation of fusion reactors with dominant alpha particle heating and, ultimately, cheaper fusion electricity
△ Less
Submitted 2 November, 2020; v1 submitted 15 October, 2020;
originally announced October 2020.
-
Tractable flux-driven temperature, density, and rotation profile evolution with the quasilinear gyrokinetic transport model QuaLiKiz
Authors:
J Citrin,
C Bourdelle,
F J Casson,
C Angioni,
N Bonanomi,
Y Camenen,
X Garbet,
L Garzotti,
T Görler,
O Gürcan,
F Koechl,
F Imbeaux,
O Linder,
K van de Plassche,
P Strand,
G Szepesi,
JET Contributors
Abstract:
Quasilinear turbulent transport models are a successful tool for prediction of core tokamak plasma profiles in many regimes. Their success hinges on the reproduction of local nonlinear gyrokinetic fluxes. We focus on significant progress in the quasilinear gyrokinetic transport model QuaLiKiz [C. Bourdelle et al. 2016 Plasma Phys. Control. Fusion 58 014036], which employs an approximated solution…
▽ More
Quasilinear turbulent transport models are a successful tool for prediction of core tokamak plasma profiles in many regimes. Their success hinges on the reproduction of local nonlinear gyrokinetic fluxes. We focus on significant progress in the quasilinear gyrokinetic transport model QuaLiKiz [C. Bourdelle et al. 2016 Plasma Phys. Control. Fusion 58 014036], which employs an approximated solution of the mode structures to significantly speed up computation time compared to full linear gyrokinetic solvers. Optimization of the dispersion relation solution algorithm within integrated modelling applications leads to flux calculations $\times10^{6-7}$ faster than local nonlinear simulations. This allows tractable simulation of flux-driven dynamic profile evolution including all transport channels: ion and electron heat, main particles, impurities, and momentum. Furthermore, QuaLiKiz now includes the impact of rotation and temperature anisotropy induced poloidal asymmetry on heavy impurity transport, important for W-transport applications. Application within the JETTO integrated modelling code results in 1s of JET plasma simulation within 10 hours using 10 CPUs. Simultaneous predictions of core density, temperature, and toroidal rotation profiles for both JET hybrid and baseline experiments are presented, covering both ion and electron turbulence scales. The simulations are successfully compared to measured profiles, with agreement mostly in the 5-25% range according to standard figures of merit.
△ Less
Submitted 7 August, 2017; v1 submitted 3 August, 2017;
originally announced August 2017.
-
Microstability analysis of pellet fuelled discharges in MAST
Authors:
L. Garzotti,
J. Figueiredo,
C. M. Roach,
M. Valovic,
D. Dickinson,
G. Naylor,
M. Romanelli,
R. Scannell,
G. Szepesi,
the MAST team
Abstract:
Reactor grade plasmas are likely to be fuelled by pellet injection. This technique transiently perturbs the profiles, driving the density profile hollow and flattening the edge temperature profile. After the pellet perturbation, the density and temperature profiles relax towards their quasi-steady-state shape. Microinstabilities influence plasma confinement and will play a role in determining the…
▽ More
Reactor grade plasmas are likely to be fuelled by pellet injection. This technique transiently perturbs the profiles, driving the density profile hollow and flattening the edge temperature profile. After the pellet perturbation, the density and temperature profiles relax towards their quasi-steady-state shape. Microinstabilities influence plasma confinement and will play a role in determining the evolution of the profiles in pellet fuelled plasmas. In this paper we present the microstability analysis of pellet fuelled H-mode MAST plasmas. Taking advantage of the unique capabilities of the MAST Thomson scattering system and the possibility of synchronizing the eight lasers with the pellet injection, we were able to measure the evolution of the post-pellet electron density and temperature profiles with high temporal and spatial resolution. These profiles, together with ion temperature profiles measured using a charge exchange diagnostic, were used to produce equilibria suitable for microstability analysis of the equilibrium changes induced by pellet injection. This analysis, carried out using the local gyrokinetic code GS2, reveals that the microstability properties are extremely sensitive to the rapid and large transient excursions of the density and temperature profiles, which also change collisionality and beta e significantly in the region most strongly affected by the pellet ablation.
△ Less
Submitted 10 April, 2014; v1 submitted 24 March, 2014;
originally announced March 2014.
-
Analysis of Lithium Driven Electron Density Peaking in FTU Liquid Lithium Limiter Experiments
Authors:
G. Szepesi,
M. Romanelli,
F. Militello,
A. G. Peeters,
Y. Camenen,
F. J. Casson,
W. A. Hornsby,
A. P. Snodin,
D. Wagner,
FTU team
Abstract:
The impact of lithium impurities on the microstability and turbulent transport characteristics in the core of a typical FTU Liquid Lithium Limiter (LLL)(Mazzitelli et al., Nucl. Fusion, 2011) discharge during the density ramp-up phase is studied. A non-linear gyrokinetic analysis performed with GKW (Peeters et al.,Comp. Phys. Comm., 2009) accompanied by a quasi-linear fluid analysis is presented.…
▽ More
The impact of lithium impurities on the microstability and turbulent transport characteristics in the core of a typical FTU Liquid Lithium Limiter (LLL)(Mazzitelli et al., Nucl. Fusion, 2011) discharge during the density ramp-up phase is studied. A non-linear gyrokinetic analysis performed with GKW (Peeters et al.,Comp. Phys. Comm., 2009) accompanied by a quasi-linear fluid analysis is presented. We show that a centrally peaked, high concentration lithium profile contributes to the electron peaking by reducing the outward electron flux, and that it leads to inward turbulent deuterium transport through ion flux separation.
△ Less
Submitted 19 June, 2013;
originally announced June 2013.