-
Preliminary Measurements for a Sub-Femtosecond Electron Bunch Length Diagnostic
Authors:
M. K. Weikum,
G. Andonian,
N. S. Sudar,
M. G. Fedurin,
M. N. Polyanskiy,
C. Swinson,
A. Ovodenko,
F. O'Shea,
M. Harrison,
Z. M. Sheng,
R. W. Assmann
Abstract:
With electron beam durations down to femtoseconds and sub-femtoseconds achievable in current state-of-the-art accelerators, longitudinal bunch length diagnostics with resolution at the attosecond level are required. In this paper, we present such a novel measurement device which combines a high power laser modulator with an RF deflecting cavity in the orthogonal direction. While the laser applies…
▽ More
With electron beam durations down to femtoseconds and sub-femtoseconds achievable in current state-of-the-art accelerators, longitudinal bunch length diagnostics with resolution at the attosecond level are required. In this paper, we present such a novel measurement device which combines a high power laser modulator with an RF deflecting cavity in the orthogonal direction. While the laser applies a strong correlated angular modulation to a beam, the RF deflector ensures the full resolution of this streaking effect across the bunch hence recovering the temporal beam profile with sub-femtosecond resolution. Preliminary measurements to test the key components of this concept were carried out at the Accelerator Test Facility (ATF) at Brookhaven National Laboratory recently, the results of which are presented and discussed here. Moreover, a possible application of the technique for novel accelerator schemes is examined based on simulations with the particle-tracking code elegant and our beam profile reconstruction tool.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
An inverse free electron laser acceleration-driven Compton scattering X-ray source
Authors:
I. Gadjev,
N. Sudar,
M. Babzien,
J. Duris,
P. Hoang,
M. Fedurin,
K. Kusche,
R. Malone,
P. Musumeci,
M. Palmer,
I. Pogorelsky,
M. Polyanskiy,
Y. Sakai,
C. Swinson,
O. Williams,
J. B. Rosenzweig
Abstract:
The generation of X-rays and γ-rays based on synchrotron radiation from free electrons, emitted in magnet arrays such as undulators, forms the basis of much of modern X-ray science. This approach has the drawback of requiring very high energy, up to the multi-GeV-scale, electron beams, to obtain the required photon energy. Due to the limit in accelerating gradients in conventional particle acceler…
▽ More
The generation of X-rays and γ-rays based on synchrotron radiation from free electrons, emitted in magnet arrays such as undulators, forms the basis of much of modern X-ray science. This approach has the drawback of requiring very high energy, up to the multi-GeV-scale, electron beams, to obtain the required photon energy. Due to the limit in accelerating gradients in conventional particle accelerators, reaching high energy typically demands use of instruments exceeding 100's of meters in length. Compact, less costly, monochromatic X-ray sources based on very high field acceleration and very short period undulators, however, may revolutionize diverse advanced X-ray applications ranging from novel X-ray therapy techniques to active interrogation of sensitive materials, by making them accessible in cost and size. Such compactness may be obtained by an all-optical approach, which employs a laser-driven high gradient accelerator based on inverse free electron laser (IFEL), followed by a collision point for inverse Compton scattering (ICS), a scheme where a laser is used to provide undulator fields. We present an experimental proof-of-principle of this approach, where a TW-class CO2 laser pulse is split in two, with half used to accelerate a high quality electron beam up to 84 MeV through the IFEL interaction, and the other half acts as an electromagnetic undulator to generate up to 13 keV X-rays via ICS. These results demonstrate the feasibility of this scheme, which can be joined with other techniques such as laser recirculation to yield very compact, high brilliance photon sources, extending from the keV to MeV scale. Furthermore, use of the IFEL acceleration with the ICS interaction produces a train of very high intensity X-ray pulses, thus also permitting a unique tool that can be phase-locked to a laser pulse in frontier pump-probe experimental scenarios.
△ Less
Submitted 2 November, 2017;
originally announced November 2017.
-
Demonstration of cascaded modulator-chicane micro-bunching of a relativistic electron beam
Authors:
N. Sudar,
P. Musumeci,
I. Gadjev,
Y. Sakai,
S. Fabbri,
M. Polyanskiy,
I. Pogorelsky,
M. Fedurin,
C. Swinson,
K. Kusche,
M. Babzien,
M. Palmer
Abstract:
We present results of an experiment showing the first successful demonstration of a cascaded micro-bunching scheme. Two modulator-chicane pre-bunchers arranged in series and a high power mid-IR laser seed are used to modulate a 52 MeV electron beam into a train of sharp microbunches phase-locked to the external drive laser. This configuration allows to increase the fraction of electrons trapped in…
▽ More
We present results of an experiment showing the first successful demonstration of a cascaded micro-bunching scheme. Two modulator-chicane pre-bunchers arranged in series and a high power mid-IR laser seed are used to modulate a 52 MeV electron beam into a train of sharp microbunches phase-locked to the external drive laser. This configuration allows to increase the fraction of electrons trapped in a strongly tapered inverse free electron laser (IFEL) undulator to 96\%, with up to 78\% of the particles accelerated to the final design energy yielding a significant improvement compared to the classical single buncher scheme. These results represent a critical advance in laser-based longitudinal phase space manipulations and find application both in high gradient advanced acceleration as well as in high peak and average power coherent radiation sources.
△ Less
Submitted 17 August, 2017;
originally announced August 2017.
-
Experimental characterization of electron beam driven wakefield modes in a dielectric woodpile Cartesian symmetric structure
Authors:
P. D. Hoang,
G. Andonian,
I. Gadjev,
B. Naranjo,
Y. Sakai,
N. Sudar,
O. Williams,
M. Fedurin,
K. Kusche,
C. Swinson,
J. B. Rosenzweig
Abstract:
The use of photonic structures in the terahertz (THz) spectral region may enable the essential characteristics of confinement, modal control, and electric field shielding for very high gradient accelerators based on wakefields in dielectrics. We report here an experimental investigation of THz wakefield modes in a 3D photonic woodpile structure. Selective control in exciting or suppressing of wake…
▽ More
The use of photonic structures in the terahertz (THz) spectral region may enable the essential characteristics of confinement, modal control, and electric field shielding for very high gradient accelerators based on wakefields in dielectrics. We report here an experimental investigation of THz wakefield modes in a 3D photonic woodpile structure. Selective control in exciting or suppressing of wakefield modes with non-zero transverse wave vector is demonstrated by using drive beams of varying transverse ellipticity. Additionally, we show that the wakefield spectrum is insensitive to the offset position of the strongly elliptical beam. These results are consistent with analytic theory and 3D simulations, and illustrate a key advantage of wakefield systems with Cartesian symmetry, the suppression of transverse wakes by elliptical beams.
△ Less
Submitted 31 July, 2017;
originally announced August 2017.
-
Single shot, double differential spectral measurements of inverse Compton scattering in linear and nonlinear regimes
Authors:
Y. Sakai,
I. Gadjev,
P. Hoang,
N. Majernik,
A. Nause,
A. Fukusawa,
O. Williams,
M. Fedurin,
B. Malone,
C. Swinson,
K. Kusche,
M. Polyanski,
M. Babzien,
M. Montemagno,
Z. Zhong,
P. Siddons,
I. Pogorelsky,
V. Yakimenko,
T. Kumita,
Y. Kamiya,
J. B. Rosenzweig
Abstract:
Inverse Compton scattering (ICS) is a unique mechanism for producing fast pulses - picosecond and below - of bright X- to gamma-rays. These nominally narrow spectral bandwidth electromagnetic radiation pulses are efficiently produced in the interaction between intense, well-focused electron and laser beams. The spectral characteristics of such sources are affected by many experimental parameters,…
▽ More
Inverse Compton scattering (ICS) is a unique mechanism for producing fast pulses - picosecond and below - of bright X- to gamma-rays. These nominally narrow spectral bandwidth electromagnetic radiation pulses are efficiently produced in the interaction between intense, well-focused electron and laser beams. The spectral characteristics of such sources are affected by many experimental parameters, such as the bandwidth of the laser, and the angles of both the electrons and laser photons at collision. The laser field amplitude induces harmonic generation and importantly, for the present work, nonlinear red shifting, both of which dilute the spectral brightness of the radiation. As the applications enabled by this source often depend sensitively on its spectra, it is critical to resolve the details of the wavelength and angular distribution obtained from ICS collisions. With this motivation, we present here an experimental study that greatly improves on previous spectral measurement methods based on X-ray K-edge filters, by implementing a multi-layer bent-crystal X-ray spectrometer. In tandem with a collimating slit, this method reveals a projection of the double-differential angular-wavelength spectrum of the ICS radiation in a single shot. The measurements enabled by this diagnostic illustrate the combined off-axis and nonlinear-field-induced red shifting in the ICS emission process. They reveal in detail the strength of the normalized laser vector potential, and provide a non-destructive measure of the temporal and spatial electron-laser beam overlap.
△ Less
Submitted 2 January, 2017;
originally announced January 2017.
-
Measurements of Terahertz Radiation Generated using a Metallic, Corrugated Pipe
Authors:
Karl Bane,
Gennady Stupakov,
Sergey Antipov,
Mikhail Fedurin,
Karl Kusche,
Christina Swinson,
Dao Xiang
Abstract:
A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-p…
▽ More
A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-peak) of 60 um. In the experiment we measured both the effect on the beam of the structure wakefield and the spectral properties of the radiation excited by the beam. We began by injecting a relatively long beam compared to the wavelength of the radiation, but with short rise time, to excite the structure, and then used a downstream spectrometer to infer the radiation wavelength. This was followed by injecting a shorter bunch, and then using an interferometer (also downstream of the corrugated pipe) to measure the spectrum of the induced THz radiation. For the THz pulse we obtain and compare with calculations: the central frequency, the bandwidth, and the spectral power---compared to a diffraction radiation background signal.
△ Less
Submitted 22 August, 2016;
originally announced August 2016.
-
Measurements of Terahertz Generation in a Metallic, Corrugated Beam Pipe
Authors:
K. L. F. Bane,
S. Antipov,
M. Fedurin,
K. Kusche,
C. Swinson,
D. Xiang
Abstract:
A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-p…
▽ More
A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-peak) of 60 um. In the experiment we measured both the effect on the beam of the structure wakefield and the spectral properties of the radiation excited by the beam. We began by injecting a relatively long beam compared to the wavelength of the radiation to excite the structure, and then used a downstream spectrometer to infer the radiation wavelength. This was followed by injecting a shorter bunch, and then using an interferometer (also downstream of the corrugated pipe) to measure the spectrum of the induced THz radiation.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
High efficiency energy extraction from a relativistic electron beam in a strongly tapered undulator
Authors:
Nicholas Sudar,
Pietro Musumeci,
Joe Duris,
Ivan Gadjev,
Mikhail Polyaniy,
Igor Pogorelsky,
Mikhail Fedurin,
Christina Swinson,
Marcus Babzien,
Karl Kusche,
Avi Gover
Abstract:
We present results of an experiment where, using a 200 GW CO2 laser seed, a 65 MeV electron beam was decelerated down to 35 MeV in a 54 cm long strongly tapered helical magnetic undulator, extracting over 30$\%$ of the initial electron beam energy to coherent radiation. These results demonstrate unparalleled electro-optical conversion efficiencies for a relativistic beam in an undulator field and…
▽ More
We present results of an experiment where, using a 200 GW CO2 laser seed, a 65 MeV electron beam was decelerated down to 35 MeV in a 54 cm long strongly tapered helical magnetic undulator, extracting over 30$\%$ of the initial electron beam energy to coherent radiation. These results demonstrate unparalleled electro-optical conversion efficiencies for a relativistic beam in an undulator field and represent an important step in the development of high peak and average power coherent radiation sources.
△ Less
Submitted 4 May, 2016;
originally announced May 2016.
-
Experimental Demonstration of Energy Chirp Compensation by a Tunable Dielectric Based Structure
Authors:
S. Antipov,
S. Baturin,
C. **g,
M. Fedurin,
A. Kanareykin,
C. Swinson,
P. Schoessow,
W. Gai,
A. Zholents
Abstract:
A 60 MeV beam at the BNL Accelerator Test Facility (ATF) was manipulated by a planar tunable de-chirper made out of two 10 cm long dielectric slabs with copper plated backs. While the gap was changed from 5.8 mm to 1 mm, the correlated energy chirp of the low charge electron bunch was reduced from approximately 330 keV/mm to zero. This result is in agreement with simulations. Calculations show tha…
▽ More
A 60 MeV beam at the BNL Accelerator Test Facility (ATF) was manipulated by a planar tunable de-chirper made out of two 10 cm long dielectric slabs with copper plated backs. While the gap was changed from 5.8 mm to 1 mm, the correlated energy chirp of the low charge electron bunch was reduced from approximately 330 keV/mm to zero. This result is in agreement with simulations. Calculations show that similar devices, properly scaled to account for the expected electron bunch charge and length, can be used to remove residual correlated energy spread at the end of the linacs used for free-electron lasers (FEL). Potentially, this technique could significantly simplify linac design and improve FEL performance.
△ Less
Submitted 26 August, 2013;
originally announced August 2013.
-
Cavity beam position monitor system for the Accelerator Test Facility 2
Authors:
Y. I. Kim,
R. Ainsworth,
A. Aryshev,
S. T. Boogert,
G. Boorman,
J. Frisch,
A. Heo,
Y. Honda,
W. H. Hwang,
J. Y. Huang,
E. -S. Kim,
S. H. Kim,
A. Lyapin,
T. Naito,
J. May,
D. McCormick,
R. E. Mellor,
S. Molloy,
J. Nelson,
S. J. Park,
Y. J. Park,
M. Ross,
S. Shin,
C. Swinson,
T. Smith
, et al. (4 additional authors not shown)
Abstract:
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electro…
▽ More
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electronics, and digital processing are described. The resolution of the C-band system with attenuators was determined to be approximately 250 nm and 1 m for the S-band system. Without attenuation the best recorded C-band cavity resolution was 27 nm.
△ Less
Submitted 23 January, 2013;
originally announced January 2013.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Latest Beam Test Results of the FONT4 ILC Intra-train Feedback System Prototype
Authors:
P. N. Burrows,
R. Apsimon,
G. B. Christian,
C. Clarke,
B. Constance,
H. Dabiri Khah,
T. Hartin,
A. Kalinin,
C. Perry,
J. Resta Lopez,
C. Swinson
Abstract:
We present the design and preliminary results of a prototype beam-based digital feedback system for the Interaction Point of the International Linear Collider. A custom analogue front-end processor, FPGA-based digital signal processing board, and kicker drive amplifier have been designed, built, and tested on the extraction line of the KEK Accelerator Test Facility (ATF). The system was measured…
▽ More
We present the design and preliminary results of a prototype beam-based digital feedback system for the Interaction Point of the International Linear Collider. A custom analogue front-end processor, FPGA-based digital signal processing board, and kicker drive amplifier have been designed, built, and tested on the extraction line of the KEK Accelerator Test Facility (ATF). The system was measured to have a latency of approximately 140 ns.
△ Less
Submitted 4 March, 2009;
originally announced March 2009.
