-
Orientation map** of YbSn$_3$ single crystals based on Bragg-dip analysis using a delay-line superconducting sensor
Authors:
Hiroaki Shishido,
The Dang Vu,
Kazuya Aizawa,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Takayuki Oku,
Kazuhiko Soyama,
Shigeyuki Miyajima,
Mutsuo Hidaka,
Soh Y. Suzuki,
Manobu M. Tanaka,
Shuichi Kawamata,
Takekazu Ishida
Abstract:
Recent progress in high-power pulsed neutron sources has stimulated the development of the Bragg-dip and Bragg-edge analysis methods using a two-dimensional neutron detector with high temporal resolution to resolve the neutron energy by the time-of-flight method. The delay-line current-biased kinetic-inductance detector (CB-KID) is a two-dimensional superconducting sensor with a high temporal reso…
▽ More
Recent progress in high-power pulsed neutron sources has stimulated the development of the Bragg-dip and Bragg-edge analysis methods using a two-dimensional neutron detector with high temporal resolution to resolve the neutron energy by the time-of-flight method. The delay-line current-biased kinetic-inductance detector (CB-KID) is a two-dimensional superconducting sensor with a high temporal resolution and multi-hit capability. We demonstrate that the delay-line CB-KID with a $^{10}$B neutron conversion layer can be applied to high-spatial-resolution neutron transmission imaging and spectroscopy up to 100\,eV. Dip structures in the transmission spectrum induced by Bragg diffraction and nuclear resonance absorption in YbSn$_3$ single crystals. We successfully drew the orientation map** of YbSn$_3$ crystals based on the analysis of observed Bragg-dip positions in the transmission spectrum.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Scintillator ageing of the T2K near detectors from 2010 to 2021
Authors:
The T2K Collaboration,
K. Abe,
N. Akhlaq,
R. Akutsu,
A. Ali,
C. Alt,
C. Andreopoulos,
M. Antonova,
S. Aoki,
T. Arihara,
Y. Asada,
Y. Ashida,
E. T. Atkin,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
D. Barrow,
M. Batkiewicz-Kwasniak,
F. Bench,
V. Berardi,
L. Berns,
S. Bhadra,
A. Blanchet,
A. Blondel
, et al. (333 additional authors not shown)
Abstract:
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation…
▽ More
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
High Spatial Resolution Neutron Transmission Imaging Using a Superconducting Two-Dimensional Detector
Authors:
Hiroaki Shishido,
Kazuma Nishimura,
The Dang Vu,
Kazuya Aizawa,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Takayuki Oku,
Kazuhiko Soyama,
Shigeyuki Miyajima,
Mutsuo Hidaka,
Soh Y. Suzuki,
Manobu M. Tanaka,
Shuichi Kawamata,
Takekazu Ishida
Abstract:
Neutron imaging is one of the most powerful tools for nondestructive inspection owing to the unique characteristics of neutron beams, such as high permeability for many heavy metals, high sensitivity for certain light elements, and isotope selectivity owing to a specific nuclear reaction between an isotope and neutrons. In this study, we employed a superconducting detector, current-biased kinetic-…
▽ More
Neutron imaging is one of the most powerful tools for nondestructive inspection owing to the unique characteristics of neutron beams, such as high permeability for many heavy metals, high sensitivity for certain light elements, and isotope selectivity owing to a specific nuclear reaction between an isotope and neutrons. In this study, we employed a superconducting detector, current-biased kinetic-inductance detector (CB-KID) for neutron imaging using a pulsed neutron source. We employed the delay-line method, and high spatial resolution imaging with only four reading channels was achieved. We also performed wavelength-resolved neutron imaging by the time-of-flight method for the pulsed neutron source. We obtained the neutron transmission images of a Gd-Al alloy sample, inside which single crystals of GdAl3 were grown, using the delay-line CB-KID. Single crystals were well imaged, in both shapes and distributions, throughout the Al-Gd alloy. We identified Gd nuclei via neutron transmissions that exhibited characteristic suppression above the neutron wavelength of 0.03 nm. In addition, the ^{155}Gd resonance dip, a dip structure of the transmission caused by the nuclear reaction between an isotope and neutrons, was observed even when the number of events was summed over a limited area of 15 X 12 um^2. Gd selective imaging was performed using the resonance dip of ^{155}Gd, and it showed clear Gd distribution even with a limited neutron wavelength range of 1 pm.
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
Supernova Model Discrimination with Hyper-Kamiokande
Authors:
Hyper-Kamiokande Collaboration,
:,
K. Abe,
P. Adrich,
H. Aihara,
R. Akutsu,
I. Alekseev,
A. Ali,
F. Ameli,
I. Anghel,
L. H. V. Anthony,
M. Antonova,
A. Araya,
Y. Asaoka,
Y. Ashida,
V. Aushev,
F. Ballester,
I. Bandac,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz-Kwasniak,
M. Bellato,
V. Berardi,
M. Bergevin
, et al. (478 additional authors not shown)
Abstract:
Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla…
▽ More
Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature.
△ Less
Submitted 20 July, 2021; v1 submitted 13 January, 2021;
originally announced January 2021.
-
Performance of the Unified Readout System of Belle II
Authors:
Mikihiko Nakao,
Ryosuke Itoh,
Satoru Yamada,
Soh Y. Suzuki,
Tomoyuki Konno,
Qi-Dong Zhou,
Takuto Kunigo,
Ryohei Sugiura,
Seokhee Park,
Zhen-An Liu,
**gzhou Zhao,
Igor Konorov,
Dmytro Levit,
Katsuro Nakamura,
Hikaru Tanigawa,
Nanae Taniguchi,
Tomohisa Uchida,
Kurtis Nishimura,
Oskar Hartbrich,
Yun-Tsung Lai,
Masayoshi Shoji,
Alexander Kuzmin,
Vladimir Zhulanov,
Brandon Kunkler,
Isar Mostafanezhad
, et al. (2 additional authors not shown)
Abstract:
The Belle II experiment at the SuperKEKB collider at KEK, Tsukuba, Japan has successfully started taking data with the full detector in March 2019. Belle II is a luminosity frontier experiment of the new generation to search for physics beyond the Standard Model of elementary particles, from precision measurements of a huge number of B and charm mesons and tau leptons. In order to read out the eve…
▽ More
The Belle II experiment at the SuperKEKB collider at KEK, Tsukuba, Japan has successfully started taking data with the full detector in March 2019. Belle II is a luminosity frontier experiment of the new generation to search for physics beyond the Standard Model of elementary particles, from precision measurements of a huge number of B and charm mesons and tau leptons. In order to read out the events at a high rate from the seven subdetectors of Belle II, we adopt a highly unified readout system, including a unified trigger timing distribution system (TTD), a unified high speed data link system (Belle2link), and a common backend system to receive Belle2link data. Each subdetector frontend readout system has a field-programmable gate array (FPGA) in which unified firmware components of the TTD receiver and Belle2link transmitter are embedded. The system is designed for data taking at a trigger rate up to 30 kHz with a dead-time fraction of about 1% in the frontend readout system. The trigger rate is still much lower than our design. However, the background level is already high due to the initial vacuum condition and other accelerator parameters, and it is the most limiting factor of the accelerator and detector operation. Hence the occupancy and radiation effects to the frontend electronics are rather severe, and they cause various kind of instabilities. We present the performance of the system, including the achieved trigger rate, dead-time fraction, stability, and discuss the experience gained during the operation.
△ Less
Submitted 26 May, 2021; v1 submitted 29 October, 2020;
originally announced October 2020.
-
PCI-express based high-speed readout for the BelleII DAQ upgrade
Authors:
Q. D. Zhou,
S. Yamada,
P. Robbe,
D. Charlet,
R. Itoh,
M. Nakao,
S. Y. Suzuki,
T. Kunigo,
E. Jules,
E. Plaige,
M. Taurigna,
H. Purwar,
O. Hartbrich,
M. Bessner,
K. Nishimura,
G. Varner,
Y. -T Lai,
T. Higuchi,
R. Sugiura,
D. Biswas,
P. Kapusta
Abstract:
Belle II is a new-generation B-factory experiment, dedicated to exploring new physics beyond the standard model of elementary particles in the flavor sector. Belle~II started data-taking in April 2018, using a synchronous data acquisition (DAQ) system based on pipelined trigger flow control. The Belle II DAQ system is designed to handle a 30-kHz trigger rate with approximately 1% of dead time, und…
▽ More
Belle II is a new-generation B-factory experiment, dedicated to exploring new physics beyond the standard model of elementary particles in the flavor sector. Belle~II started data-taking in April 2018, using a synchronous data acquisition (DAQ) system based on pipelined trigger flow control. The Belle II DAQ system is designed to handle a 30-kHz trigger rate with approximately 1% of dead time, under the assumption of a raw event size of 1 MB. The DAQ system is reliable, and the overall data-taking efficiency reached 84.2% during the run period of January 2020 to June 2020. The current readout system cannot be operated in the term of 10 years from the viewpoint of DAQ maintainability; meanwhile, the readout system is obstructing high-speed data transmission. A solution involving a PCI-express-based readout module with high data throughput of up to 100 Gb/s was adopted to upgrade the Belle II DAQ system. We particularly focused on the design of firmware and software based on this new generation of readout board, called PCIe40, with an Altera Arria 10 field-programmable gate array chip. Forty-eight GBT (GigaBit Transceiver) serial links, PCI-express hard IP-based DMA architecture, interface of timing and trigger distribution system, and slow control system were designed to integrate with the current Belle II DAQ system. This paper describes the performances accomplished during the data readout and slow control tests conducted using a test bench and a demonstration performed using on-site front-end electronics, specifically involving Belle II TOP and KLM sub-detectors.
△ Less
Submitted 10 June, 2021; v1 submitted 28 October, 2020;
originally announced October 2020.
-
Homogeneity of neutron transmission imaging over a large sensitive area with a four-channel superconducting detector
Authors:
The Dang Vu,
Hiroaki Shishido,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Shigeyuki Miyajima,
Takayuki Oku,
Kazuhiko Soyama,
Kazuya Aizawa,
Mutsuo Hidaka,
Soh Y. Suzuki,
Manobu M. Tanaka,
Alex Malins,
Masahiko Machida,
Takekazu Ishida
Abstract:
We previously proposed a method to detect neutrons by using a current-biased kinetic inductance detector (CB-KID), where neutrons are converted into charged particles using a 10B conversion layer. The charged particles are detected based on local changes in kinetic inductance of X and Y superconducting meanderlines under a modest DC bias current. The system uses a delay-line method to locate the p…
▽ More
We previously proposed a method to detect neutrons by using a current-biased kinetic inductance detector (CB-KID), where neutrons are converted into charged particles using a 10B conversion layer. The charged particles are detected based on local changes in kinetic inductance of X and Y superconducting meanderlines under a modest DC bias current. The system uses a delay-line method to locate the positions of neutron-10B reactions by acquiring the four arrival timestamps of signals that propagate from hot spots created by a passing charged particle to the end electrodes of the meanderlines. Unlike conventional multi-pixel imaging systems, the CB-KID system performs high spatial resolution imaging over a 15 mm x 15 mm sensitive area using only four channel readouts. Given the large sensitive area, it is important to check the spatial homogeneity and linearity of detected neutron positions when imaging with CB-KID. To this end we imaged a pattern of 10B dot absorbers with a precise dot pitch to investigate the spatial homogeneity of the detector. We confirmed the spatial homogeneity of detected dot positions based on the distribution of measured dot pitches across the sensitive area of the detector. We demonstrate potential applications of the system by taking a clear transmission image of tiny metallic screws and nuts and a ladybug. The image was useful for characterizing the ladybug noninvasively. Detection efficiencies were low when the detector was operated at 4 K, so we plan to explore raising the operating temperature towards the critical temperature of the detector as a means to improve counting rates.
△ Less
Submitted 14 October, 2020;
originally announced October 2020.
-
Energy-resolved neutron imaging with high spatial resolution using a superconducting delay-line kinetic inductance detector
Authors:
Yuki Iizawa,
Hiroaki Shishido,
Kazuma Nishimura,
The Dang Vu,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Shigeyuki Miyajima,
Mutsuo Hidaka,
Takayuki Oku,
Kazuhiko Soyama,
Kazuya Aizawa,
Soh Y. Suzuki,
Takekazu Ishida
Abstract:
Neutron imaging is one of the key technologies for non-destructive transmission testing. Recent progress in the development of intensive neutron sources allows us to perform energy-resolved neutron imaging with high spatial resolution. Substantial efforts have been devoted to develo** a high spatial and temporal resolution neutron imager. We have been develo** a neutron imager aiming at conduc…
▽ More
Neutron imaging is one of the key technologies for non-destructive transmission testing. Recent progress in the development of intensive neutron sources allows us to perform energy-resolved neutron imaging with high spatial resolution. Substantial efforts have been devoted to develo** a high spatial and temporal resolution neutron imager. We have been develo** a neutron imager aiming at conducting high spatial and temporal resolution imaging based on a delay-line neutron detector, called the current-biased kinetic-inductance detector, with a conversion layer $^{10}$B. The detector allowed us to obtain a neutron transmission image with four signal readout lines. Herein, we expanded the sensor active area, and improved the spatial resolution of the detector. We examined the capability of high spatial resolution neutron imaging over the sensor active area of 15 $\times$ 15 mm$^2$ for various samples, including biological and metal ones. We also demonstrated an energy-resolved neutron image in which stainless-steel specimens were discriminating of other specimens with the aid of the Bragg edge transmission.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
J-PARC Neutrino Beamline Upgrade Technical Design Report
Authors:
K. Abe,
H. Aihara,
A. Ajmi,
C. Alt,
C. Andreopoulos,
M. Antonova,
S. Aoki,
Y. Asada,
Y. Ashida,
A. Atherton,
E. Atkin,
S. Ban,
F. C. T. Barbato,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz,
A. Beloshapkin,
V. Berardi,
L. Berns,
S. Bhadra,
J. Bian,
S. Bienstock,
A. Blondel,
S. Bolognesi
, et al. (360 additional authors not shown)
Abstract:
In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neut…
▽ More
In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described.
△ Less
Submitted 14 August, 2019;
originally announced August 2019.
-
Measurement of the $ν_μ$ charged-current cross sections on water, hydrocarbon, iron, and their ratios with the T2K on-axis detectors
Authors:
K. Abe,
R. Akutsu,
A. Ali,
C. Andreopoulos,
L. Anthony,
M. Antonova,
S. Aoki,
A. Ariga,
Y. Ashida,
Y. Awataguchi,
Y. Azuma,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
C. Barry,
M. Batkiewicz-Kwasniak,
F. Bench,
V. Berardi,
S. Berkman,
R. M. Berner,
L. Berns,
S. Bhadra,
S. Bienstock,
A. Blondely
, et al. (292 additional authors not shown)
Abstract:
We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817…
▽ More
We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817$\pm 0.007$(stat.)$^{+0.11}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, and $σ^{\rm{Fe}}_{\rm{CC}}$ = (0.859$\pm 0.003$(stat.) $^{+0.12}_{-0.10}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon respectively, for a restricted phase space of induced muons: $θ_μ<45^{\circ}$ and $p_μ>$0.4 GeV/$c$ in the laboratory frame. The measured cross section ratios are ${σ^{\rm{H_{2}O}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.028$\pm 0.016$(stat.)$\pm 0.053$(syst.), ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{H_{2}O}}_{\rm{CC}}}$ = 1.023$\pm 0.012$(stat.)$\pm 0.058$(syst.), and ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.049$\pm 0.010$(stat.)$\pm 0.043$(syst.). These results, with an unprecedented precision for the measurements of neutrino cross sections on water in the studied energy region, show good agreement with the current neutrino interaction models used in the T2K oscillation analyses.
△ Less
Submitted 21 April, 2019;
originally announced April 2019.
-
T2K ND280 Upgrade -- Technical Design Report
Authors:
K. Abe,
H. Aihara,
A. Ajmi,
C. Andreopoulos,
M. Antonova,
S. Aoki,
Y. Asada,
Y. Ashida,
A. Atherton,
E. Atkin,
D. Attié,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz,
A. Beloshapkin,
V. Berardi,
L. Berns,
S. Bhadra,
J. Bian,
S. Bienstock,
A. Blondel,
J. Boix,
S. Bolognesi
, et al. (359 additional authors not shown)
Abstract:
In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve…
▽ More
In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve the physics reach of the T2K-II project. This goal is achieved by modifying the upstream part of the detector, adding a new highly granular scintillator detector (Super-FGD), two new TPCs (High-Angle TPC) and six TOF planes. Details about the detector concepts, design and construction methods are presented, as well as a first look at the test-beam data taken in Summer 2018. An update of the physics studies is also presented.
△ Less
Submitted 14 October, 2020; v1 submitted 11 January, 2019;
originally announced January 2019.
-
Proposal for an Extended Run of T2K to $20\times10^{21}$ POT
Authors:
K. Abe,
H. Aihara,
A. Amji,
J. Amey,
C. Andreopoulos,
M. Antonova,
S. Aoki,
A. Atherton,
S. Ban,
F. C. T. Barbato,
M. Barbi,
F. C. T. Barbato,
G. J. Barker,
G. Barr,
P. Bartet-Friburg,
M. Batkiewicz,
V. Berardi,
S. Bhadra,
S. Bienstock,
A. Blondel,
S. Bolognesi,
S. Bordoni,
S. B. Boyd,
D. Brailsford,
A. Bravar
, et al. (292 additional authors not shown)
Abstract:
Recent measurements by the T2K neutrino oscillation experiment indicate that CP violation in neutrino mixing may be observed in the future by long-baseline neutrino oscillation experiments. We propose an extension to the currently approved T2K running from $7.8\times 10^{21}~\mbox{POT}$ to $20\times 10^{21}~\mbox{POT}$, aiming at initial observation of CP violation with 3$\,σ$ or higher significan…
▽ More
Recent measurements by the T2K neutrino oscillation experiment indicate that CP violation in neutrino mixing may be observed in the future by long-baseline neutrino oscillation experiments. We propose an extension to the currently approved T2K running from $7.8\times 10^{21}~\mbox{POT}$ to $20\times 10^{21}~\mbox{POT}$, aiming at initial observation of CP violation with 3$\,σ$ or higher significance for the case of maximum CP violation. The program also contains a measurement of mixing parameters, $θ_{23}$ and $Δm^2_{32}$, with a precision of 1.7$^\circ$ or better and 1%, respectively. With accelerator and beamline upgrades, as well as analysis improvements, this program would occur before the next generation of long-baseline neutrino oscillation experiments that are expected to start operation in 2026.
△ Less
Submitted 13 September, 2016;
originally announced September 2016.
-
On-site Background Measurements for the J-PARC E56 Experiment: A Search for Sterile Neutrino at J-PARC MLF
Authors:
S. Ajimura,
T. J. C. Bezerra,
E. Chauveau,
T. Enomoto,
H. Furuta,
M. Harada,
S. Hasegawa,
T. Hiraiwa,
Y. Igarashi,
E. Iwai,
T. Maruyama,
S. Meigo,
T. Nakano,
M. Niiyama,
K. Nishikawa,
M. Nomachi,
R. Ohta,
H. Sakai,
K. Sakai,
S. Sakamoto,
T. Shima,
F. Suekane,
S. Y. Suzuki,
K. Suzuya,
K. Tauchi
Abstract:
The J-PARC E56 experiment aims to search for sterile neutrinos at the J-PARC Materials and Life Science Experimental Facility (MLF). In order to examine the feasibility of the experiment, we measured the background rates of different detector candidate sites, which are located at the third floor of the MLF, using a detector consisting of plastic scintillators with a fiducial mass of 500 kg. The re…
▽ More
The J-PARC E56 experiment aims to search for sterile neutrinos at the J-PARC Materials and Life Science Experimental Facility (MLF). In order to examine the feasibility of the experiment, we measured the background rates of different detector candidate sites, which are located at the third floor of the MLF, using a detector consisting of plastic scintillators with a fiducial mass of 500 kg. The result of the measurements is described in this article. The gammas and neutrons induced by the beam as well as the backgrounds from the cosmic rays were measured.
△ Less
Submitted 22 April, 2015; v1 submitted 23 February, 2015;
originally announced February 2015.
-
Measurement of the muon beam direction and muon flux for the T2K neutrino experiment
Authors:
K. Suzuki,
S. Aoki,
A. Ariga,
T. Ariga,
F. Bay,
C. Bronner,
A. Ereditato,
M. Friend,
M. Hartz,
T. Hiraki,
A. K. Ichikawa,
T. Ishida,
T. Ishii,
F. Juget,
T. Kikawa,
T. Kobayashi,
H. Kubo,
K. Matsuoka,
T. Maruyama,
A. Minamino,
A. Murakami,
T. Nakadaira,
T. Nakaya,
K. Nakayoshi,
Y. Oyama
, et al. (8 additional authors not shown)
Abstract:
The Tokai-to-Kamioka (T2K) neutrino experiment measures neutrino oscillations by using an almost pure muon neutrino beam produced at the J-PARC accelerator facility. The T2K muon monitor was installed to measure the direction and stability of the muon beam which is produced together with the muon neutrino beam. The systematic error in the muon beam direction measurement was estimated, using data a…
▽ More
The Tokai-to-Kamioka (T2K) neutrino experiment measures neutrino oscillations by using an almost pure muon neutrino beam produced at the J-PARC accelerator facility. The T2K muon monitor was installed to measure the direction and stability of the muon beam which is produced together with the muon neutrino beam. The systematic error in the muon beam direction measurement was estimated, using data and MC simulation, to be 0.28 mrad. During beam operation, the proton beam has been controlled using measurements from the muon monitor and the direction of the neutrino beam has been tuned to within 0.3 mrad with respect to the designed beam-axis. In order to understand the muon beam properties,measurement of the absolute muon yield at the muon monitor was conducted with an emulsion detector. The number of muon tracks was measured to be $(4.06\pm0.05)\times10^4$ cm$^{-2}$ normalized with $4\times10^{11}$ protons on target with 250 kA horn operation. The result is in agreement with the prediction which is corrected based on hadron production data.
△ Less
Submitted 30 November, 2014;
originally announced December 2014.
-
Search for solar axions in XMASS, a large liquid-xenon detector
Authors:
K. Abe,
K. Hieda,
K. Hiraide,
S. Hirano,
Y. Kishimoto,
K. Kobayashi,
S. Moriyama,
K. Nakagawa,
M. Nakahata,
H. Ogawa,
N. Oka,
H. Sekiya,
A. Shinozaki Y. Suzuki,
A. Takeda,
O. Takachio,
K. Ueshima,
D. Umemoto,
M. Yamashita,
B. S. Yang,
S. Tasaka,
J. Liu,
K. Martens,
K. Hosokawa,
K. Miuchi,
A. Murata
, et al. (21 additional authors not shown)
Abstract:
XMASS, a low-background, large liquid-xenon detector, was used to search for solar axions that would be produced by bremsstrahlung and Compton effects in the Sun. With an exposure of 5.6ton days of liquid xenon, the model-independent limit on the coupling for mass $\ll$ 1keV is $|g_{aee}|< 5.4\times 10^{-11}$ (90% C.L.), which is a factor of two stronger than the existing experimental limit. The b…
▽ More
XMASS, a low-background, large liquid-xenon detector, was used to search for solar axions that would be produced by bremsstrahlung and Compton effects in the Sun. With an exposure of 5.6ton days of liquid xenon, the model-independent limit on the coupling for mass $\ll$ 1keV is $|g_{aee}|< 5.4\times 10^{-11}$ (90% C.L.), which is a factor of two stronger than the existing experimental limit. The bounds on the axion masses for the DFSZ and KSVZ axion models are 1.9 and 250eV, respectively. In the mass range of 10-40keV, this study produced the most stringent limit, which is better than that previously derived from astrophysical arguments regarding the Sun to date.
△ Less
Submitted 29 May, 2013; v1 submitted 26 December, 2012;
originally announced December 2012.
-
Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector
Authors:
K. Abe,
N. Abgrall,
Y. Ajima,
H. Aihara,
J. B. Albert,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
D. Autiero,
A. Badertscher,
M. Barbi,
G. J. Barker,
G. Barr,
M. Bass,
M. Batkiewicz,
F. Bay,
S. Bentham,
V. Berardi,
B. E. Berger
, et al. (407 additional authors not shown)
Abstract:
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure o…
▽ More
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision.
△ Less
Submitted 14 November, 2011;
originally announced November 2011.
-
The T2K Experiment
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
H. Aihara,
Y. Ajima,
J. B. Albert,
D. Allan,
P. -A. Amaudruz,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
C. Angelsen,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
J. P. A. M. de André,
D. Autiero,
A. Badertscher,
O. Ballester,
M. Barbi,
G. J. Barker,
P. Baron
, et al. (499 additional authors not shown)
Abstract:
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross…
▽ More
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem.
△ Less
Submitted 8 June, 2011; v1 submitted 6 June, 2011;
originally announced June 2011.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Design and performance of the muon monitor for the T2K neutrino oscillation experiment
Authors:
K. Matsuoka,
A. K. Ichikawa,
H. Kubo,
K. Maeda,
T. Maruyama,
C. Matsumura,
A. Murakami,
T. Nakaya,
K. Nishikawa,
T. Ozaki,
K. Sakashita,
K. Suzuki,
S. Y. Suzuki,
K. Tashiro,
K. Yamamoto,
M. Yokoyama
Abstract:
This article describes the design and performance of the muon monitor for the T2K (Tokaito-Kamioka) long baseline neutrino oscillation experiment. The muon monitor consists of two types of detector arrays: ionization chambers and silicon PIN photodiodes. It measures the intensity and profile of muons produced, along with neutrinos, in the decay of pions. The measurement is sensitive to the intensi…
▽ More
This article describes the design and performance of the muon monitor for the T2K (Tokaito-Kamioka) long baseline neutrino oscillation experiment. The muon monitor consists of two types of detector arrays: ionization chambers and silicon PIN photodiodes. It measures the intensity and profile of muons produced, along with neutrinos, in the decay of pions. The measurement is sensitive to the intensity and direction of the neutrino beam. The linearity and stability of the detectors were measured in beam tests to be within 2.4% and 1.5%, respectively. Based on the test results, the precision of the beam direction measured by the muon monitor is expected to be 0.25 mrad.
△ Less
Submitted 30 September, 2010; v1 submitted 24 August, 2010;
originally announced August 2010.
-
The Data Acquisition System Based on PMC Bus
Authors:
Y. Igarashi,
H. Fujii,
T. Higuchi,
M. Ikeno,
E. Inoue,
R. Itoh,
H. Kodama,
T. Murakami,
Y. Nagasaka,
M. Nakao,
K. Nakayoshi,
M. Saitoh,
S. Shimazaki,
S. Y. Suzuki,
M. Tanaka,
K. Tauchi,
G. Varner,
M. Yamauchi,
Y. Yasu,
T. Katayama,
K. Watanabe,
M. Ishizuka,
S. Onozawa,
C. J. Li
Abstract:
High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing con…
▽ More
High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing control. The size of the crate is for the 9U Euro-cards with the standard VME32 bus and extension connectors for power supply. The base-board comprises of a local bus with the sequencer connected to the front-end daughter cards via event buffering FIFOs, and the standard PMC (PCI mezzanine card) bus to be set a PMC processor unit to reduce data size from the front-end daughter cards. A data transfer module, which is connected to the event building system, and a trigger control unit, which communicates with the central timing controller are installed on the back-end communication card connected to the rear end of the base-board. We describe the design of this DAQ system and evaluate the performance of it.
△ Less
Submitted 30 May, 2003;
originally announced May 2003.
