-
Imaging reconstruction method on X-ray data of CMOS polarimeter combined with coded aperture
Authors:
Tsubasa Tamba,
Hirokazu Odaka,
Taihei Watanabe,
Toshiya Iwata,
Tomoaki Kasuga,
Atsushi Tanimoto,
Satoshi Takashima,
Masahiro Ichihashi,
Hiromasa Suzuki,
Aya Bamba
Abstract:
X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded apertures, which function as a photoelectron tracker and imaging optics, respectively. Faced with challenges posed by substantial artifacts and background nois…
▽ More
X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded apertures, which function as a photoelectron tracker and imaging optics, respectively. Faced with challenges posed by substantial artifacts and background noise in the coded aperture imaging associated with the conventional balanced correlation method, we adopt the Expectation-Maximization (EM) algorithm as the foundation of our imaging reconstruction method. The newly developed imaging reconstruction method is validated with imaging polarimetry and a series of X-ray beam experiments. The method demonstrates the capability to accurately reproduce an extended source comprising multiple segments with distinct polarization degrees. Comparative analysis exhibits a significant enhancement in imaging reconstruction accuracy compared to the balanced correlation method, with the background noise levels reduced to 17%. The outcomes of this study enhance the feasibility of Cube-Sat imaging polarimetry missions in the hard X-ray band, as the combination of Si CMOS sensors and coded apertures is a promising approach for realizing it.
△ Less
Submitted 7 July, 2024;
originally announced July 2024.
-
Comparison of optical spectra between asteroids Ryugu and Bennu: II. High-precision analysis for space weathering trends
Authors:
K. Yumoto,
E. Tatsumi,
T. Kouyama,
D. R. Golish,
Y. Cho,
T. Morota,
S. Kameda,
H. Sato,
B. Rizk,
D. N. DellaGiustina,
Y. Yokota,
H. Suzuki,
J. de León,
H. Campins,
J. Licandro,
M. Popescu,
J. L. Rizos,
R. Honda,
M. Yamada,
N. Sakatani,
C. Honda,
M. Matsuoka,
M. Hayakawa,
H. Sawada,
K. Ogawa
, et al. (3 additional authors not shown)
Abstract:
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the…
▽ More
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the spectra of Ryugu and Bennu evolved relative to each other would place a constraint for understanding their origins and evolutions. In this study, we compared the space weathering trends on Ryugu and Bennu by applying the results of cross calibration between ONC-T and MapCam. We show that the average Bennu surface is brighter by 18.0 $\pm$ 1.5% at 550 nm and bluer by 0.18 $\pm$ 0.03 $μ$m$^{-1}$ (480-850 nm slope) than Ryugu. The spectral slopes of surface materials are more uniform on Bennu than on Ryugu at spatial scales $\gtrsim$1 m, but Bennu is more heterogeneous at $\lesssim$1 m. This suggests that lateral mixing due to resurfacing may have been more efficient on Bennu. The reflectance-spectral slope distributions of craters on Ryugu and Bennu appeared to follow two trend lines with an offset before cross calibration, but they converged to a single straight trend without a bend after cross calibration. We show that the spectra of the freshest craters on Ryugu and Bennu are indistinguishable within the uncertainty of cross calibration. These results suggest that Ryugu and Bennu initially had similar spectra before space weathering and that they evolved in completely opposite directions along the same trend line, subsequently evolving into asteroids with different disk-averaged spectra. These findings further suggest that space weathering likely expanded the spectral slope variation of C-complex asteroids, implying that they may have formed from materials with more uniform spectral slopes.
△ Less
Submitted 7 July, 2024;
originally announced July 2024.
-
Measurement of Temperature Relaxation in the Postshock Plasma of the Northwestern Limb of SN 1006
Authors:
Masahiro Ichihashi,
Aya Bamba,
Yuichi Kato,
Satoru Katsuda,
Hiromasa Suzuki,
Tomoaki Kasuga,
Hirokazu Odaka,
Kazuhiro Nakazawa
Abstract:
Heating of charged particles via collisionless shocks, while ubiquitous in the universe, is an intriguing yet puzzling plasma phenomenon. One outstanding question is how electrons and ions approach an equilibrium after they were heated to different immediate-postshock temperatures. In order to fill the significant lack of observational information of the downstream temperature-relaxation process,…
▽ More
Heating of charged particles via collisionless shocks, while ubiquitous in the universe, is an intriguing yet puzzling plasma phenomenon. One outstanding question is how electrons and ions approach an equilibrium after they were heated to different immediate-postshock temperatures. In order to fill the significant lack of observational information of the downstream temperature-relaxation process, we observe a thermal-dominant X-ray filament in the northwest of SN~1006 with Chandra. We divide this region into four layers with a thickness of 15$^{\prime\prime}$ or 0.16 pc each, and fit each spectrum by a non-equilibrium ionization collisional plasma model. The electron temperature was found to increase toward downstream from 0.52-0.62 keV to 0.82-0.95 keV on a length scale of 60 arcsec (or 0.64 pc). This electron temperature is lower than thermal relaxation processes via Coulomb scattering, requiring some other effects such as plasma mixture due to turbulence and/or projection effects, etc, which we hope will be resolved with future X-ray calorimeter missions such as XRISM and Athena.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Radiation Hardness Studies of RPC Based on Diamond-Like Carbon Electrodes for MEG II Experiment
Authors:
Masato Takahashi,
Sei Ban,
Weiyuan Li,
Atsuhiko Ochi,
Wataru Ootani,
Atsushi Oya,
Hiromu Suzuki,
Kensuke Yamamoto
Abstract:
A novel type of resistive plate chamber, based on diamond-like carbon (DLC) electrodes is under development for background identification in the MEG II experiment. The DLC-RPC is required to have a radiation hardness to mass irradiation since it is planned to be placed in a high-intensity and low-momentum muon beam. In this study, the aging test using a high-intensity X-ray beam was conducted to e…
▽ More
A novel type of resistive plate chamber, based on diamond-like carbon (DLC) electrodes is under development for background identification in the MEG II experiment. The DLC-RPC is required to have a radiation hardness to mass irradiation since it is planned to be placed in a high-intensity and low-momentum muon beam. In this study, the aging test using a high-intensity X-ray beam was conducted to evaluate the radiation hardness of the DLC-RPC. The accumulated charge due to X-ray irradiation reached about 54 C/cm$^2$, which is approximately half of the one-year irradiation dose expected in the MEG II experiment. As a result, the degradation of the gas gain was observed due to fluorine deposition and insulators formed on the DLC electrodes. In addition, discharges via spacers were also observed repeatedly and interrupted the DLC-RPC operation.
△ Less
Submitted 8 July, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
First Study of the PIKACHU Project: Development and Evaluation of High-Purity Gd$_3$Ga$_3$Al$_2$O$_{12}$:Ce Crystals for $^{160}$Gd Double Beta Decay Search
Authors:
Takumi Omori,
Takashi Iida,
Azusa Gando,
Keishi Hosokawa,
Kei Kamada,
Keita Mizukoshi,
Yasuhiro Shoji,
Masao Yoshino,
Ken-Ichi Fushimi,
Hisanori Suzuki,
Kotaro Takahashi
Abstract:
Uncovering neutrinoless double beta decay (0$ν$2$β$) is crucial for confirming neutrinos' Majorana characteristics. The decay rate of 0$νββ$ is theoretically uncertain, influenced by nuclear matrix elements that vary across nuclides. To reduce this uncertainty, precise measurement of the half-life of neutrino-emitting double beta decay (2$ν$2$β$) in different nuclides is essential.
We have launc…
▽ More
Uncovering neutrinoless double beta decay (0$ν$2$β$) is crucial for confirming neutrinos' Majorana characteristics. The decay rate of 0$νββ$ is theoretically uncertain, influenced by nuclear matrix elements that vary across nuclides. To reduce this uncertainty, precise measurement of the half-life of neutrino-emitting double beta decay (2$ν$2$β$) in different nuclides is essential.
We have launched the PIKACHU (Pure Inorganic scintillator experiment in KAmioka for CHallenging Underground sciences) project to fabricate high-purity Ce-doped Gd$_{3}$Ga$_{3}$Al$_{2}$O$_{12}$ (GAGG) single crystals and use them to study the double beta decay of $^{160}$Gd. Predictions from two theoretical models on nuclear matrix element calculations for 2$ν$2$β$ in $^{160}$Gd show a significant discrepancy in estimated half-lives, differing by approximately an order of magnitude. If the lower half-life estimation holds true, detecting 2$ν$2$β$ in $^{160}$Gd could be achievable with a sensitivity enhancement slightly more than an order of magnitude compared to prior investigations using Ce-doped Gd$_2$SiO$_5$ (GSO) crystal. We have successfully developed GAGG crystals with purity levels surpassing previous standards through refined purification and selection of raw materials. Our experiments with these crystals indicate the feasibility of reaching sensitivities exceeding those of earlier studies. This paper discusses the ongoing development and scintillator performance evaluation of High-purity GAGG crystals, along with the anticipated future prospects of the PIKACHU experiment.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Xenon-gas ionization chamber to improve particle identification of heavy ion beams with Z>70
Authors:
Masahiro Yoshimoto,
Naoki Fukuda,
Riku Matsumura,
Daiki Nishimura,
Hideaki Otsu,
Yohei Shimizu,
Toshiyuki Sumikama,
Hiroshi Suzuki,
Hiroyuki Takahashi,
Hiroyuki Takeda,
Junki Tanaka,
Koichi Yoshida
Abstract:
In conventional ionization chambers (ICs) using P-10 (Ar+CH4) gas, as the atomic number (Z) of the ion beams increases in the energy region of 200-300 MeV/u, the Z resolution deteriorates rapidly when Z>70. This degradation is attributed to substantial energy loss straggling caused by charge state fluctuation when the beams traverse a gas medium. The energy loss straggling increases when the beams…
▽ More
In conventional ionization chambers (ICs) using P-10 (Ar+CH4) gas, as the atomic number (Z) of the ion beams increases in the energy region of 200-300 MeV/u, the Z resolution deteriorates rapidly when Z>70. This degradation is attributed to substantial energy loss straggling caused by charge state fluctuation when the beams traverse a gas medium. The energy loss straggling increases when the beams cannot attain charge state equilibrium in the IC gas. In this study, a xenon-based gas (Xe+CH4), exhibiting a sufficiently large charge state changing cross section, was used in the IC to reach charge state equilibrium. The responses of ICs with P-10 and the xenon-based gases were examined using 238U beams and cocktail radioactive isotope (RI) beams with Z=40-90 at the RI Beam Factory (RIBF). For 238U beams at 165-344 MeV/u, the P-10 gas IC yielded an energy resolution of 1.9-3.0% in full width at half maximum (FWHM), which proved inadequate for Z identification in the uranium region. In contrast, the xenon-based gas IC demonstrated a satisfactory energy resolution of 1.4-1.6%. When using cocktail RI beams, a Z resolution of 1.28 and 0.74 was achieved by the P-10 and the xenon-based gas ICs, respectively, for beams with Z=84-88 at 200 MeV/u. The contrast in Z resolutions between the P-10 and the xenon-based gas ICs was effectively elucidated by the energy loss straggling model, incorporating collisional straggling and straggling due to charge state changes in the IC gases. The xenon-based gas IC, with more than 3sigma Z separation across a broad Z range (Z=40-90), emerged as a practical solution for Z identification of heavy ion beams.
△ Less
Submitted 9 July, 2024; v1 submitted 10 January, 2024;
originally announced January 2024.
-
Spatial-photonic Ising machine by space-division multiplexing with physically tunable coefficients of a multi-component model
Authors:
Takumi Sakabe,
Suguru Shimomura,
Yusuke Ogura,
Ken-ichi Okubo,
Hiroshi Yamashita,
Hideyuki Suzuki,
Jun Tanida
Abstract:
This paper proposes a space-division multiplexed spatial-photonic Ising machine (SDM-SPIM) that physically calculates the weighted sum of the Ising Hamiltonians for individual components in a multi-component model. Space-division multiplexing enables tuning a set of weight coefficients as an optical parameter and obtaining the desired Ising Hamiltonian at a time. We solved knapsack problems to ver…
▽ More
This paper proposes a space-division multiplexed spatial-photonic Ising machine (SDM-SPIM) that physically calculates the weighted sum of the Ising Hamiltonians for individual components in a multi-component model. Space-division multiplexing enables tuning a set of weight coefficients as an optical parameter and obtaining the desired Ising Hamiltonian at a time. We solved knapsack problems to verify the system's validity, demonstrating that optical parameters impact the search property. We also investigated a new dynamic coefficient search algorithm to enhance search performance. The SDM-SPIM would physically calculate the Hamiltonian and a part of the optimization with an electronics process.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Silicon tracker array for RIB experiments at SAMURAI
Authors:
A. I. Stefanescu,
V. Panin,
L. Trache,
T. Motobayashi,
H. Otsu,
A. Saastamoinen,
T. Uesaka,
L. Stuhl,
J. Tanaka,
D. Tudor,
I. C. Stefanescu,
A. E. Spiridon,
K. Yoneda,
H. Baba,
M. Kurokawa,
Y. Togano,
Z. Halasz,
M. Sasano,
S. Ota,
Y. Kubota,
D. S. Ahn,
T. Kobayashi,
Z. Elekes,
N. Fukuda,
H. Takeda
, et al. (27 additional authors not shown)
Abstract:
This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions o…
▽ More
This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions of interest for nuclear astrophysics. The technical characteristics of the tracking array are described in detail as are its performance in two pilot experiments. The physics justification for such a system is also presented.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Low-rank combinatorial optimization and statistical learning by spatial photonic Ising machine
Authors:
Hiroshi Yamashita,
Ken-ichi Okubo,
Suguru Shimomura,
Yusuke Ogura,
Jun Tanida,
Hideyuki Suzuki
Abstract:
The spatial photonic Ising machine (SPIM) [D. Pierangeli et al., Phys. Rev. Lett. 122, 213902 (2019)] is a promising optical architecture utilizing spatial light modulation for solving large-scale combinatorial optimization problems efficiently. The primitive version of the SPIM, however, can accommodate Ising problems with only rank-one interaction matrices. In this Letter, we propose a new compu…
▽ More
The spatial photonic Ising machine (SPIM) [D. Pierangeli et al., Phys. Rev. Lett. 122, 213902 (2019)] is a promising optical architecture utilizing spatial light modulation for solving large-scale combinatorial optimization problems efficiently. The primitive version of the SPIM, however, can accommodate Ising problems with only rank-one interaction matrices. In this Letter, we propose a new computing model for the SPIM that can accommodate any Ising problem without changing its optical implementation. The proposed model is particularly efficient for Ising problems with low-rank interaction matrices, such as knapsack problems. Moreover, it acquires the learning ability of Boltzmann machines. We demonstrate that learning, classification, and sampling of the MNIST handwritten digit images are achieved efficiently using the model with low-rank interactions. Thus, the proposed model exhibits higher practical applicability to various problems of combinatorial optimization and statistical learning, without losing the scalability inherent in the SPIM architecture.
△ Less
Submitted 7 August, 2023; v1 submitted 27 March, 2023;
originally announced March 2023.
-
Precision beam telescope based on SOI pixel sensor technology for electrons in the energy range of sub-GeV to GeV
Authors:
Hisanori Suzuki,
Takumi Omori,
Kazuhiko Hara,
Hiroki Yamauchi,
Miho Yamada,
Toru Tsuboyama,
Ayaki Takeda
Abstract:
We developed a beam telescope system comprising five layers of 300-$μ$m-thick INTPIX4NA monolithic pixel sensors with each pixel size of 17 $μ$m square. The sensors were fabricated using silicon-on-insulator (SOI) technology. The signal-to-noise ratio of 140--230 is realized at a bias voltage of 20~V. The tracker system was tested using a positron beam of 200--822 MeV/c, and various tracking metho…
▽ More
We developed a beam telescope system comprising five layers of 300-$μ$m-thick INTPIX4NA monolithic pixel sensors with each pixel size of 17 $μ$m square. The sensors were fabricated using silicon-on-insulator (SOI) technology. The signal-to-noise ratio of 140--230 is realized at a bias voltage of 20~V. The tracker system was tested using a positron beam of 200--822 MeV/c, and various tracking methods are examined to optimize spatial precision achievable at these energies. The best tracking precision including the precision of the sensor under test itself is 11.04 $\pm$ 0.10 $μ$m for 822-MeV/c positrons for an equidistant sensor spacing of 32 mm. The achieved precision results combined with the intrinsic spatial resolution value obtained for a similar system using 120 GeV protons are used to estimate the tracking performance of electrons in the GeV energy range; a tracking precision of 2.22 $μ$m is evaluated for 5-GeV electrons. The method to estimate the tracking performance is verified using a Geant4-based simulation. The developed high precision tracker system enables to map the detailed performance of the sensors with pixel sizes of $\mathcal{O}$(10 $μ$m), therefore will be a powerful system for development of devices targeting precision position resolutions.
△ Less
Submitted 23 August, 2022; v1 submitted 8 May, 2022;
originally announced May 2022.
-
Extended dynamic mode decomposition with dictionary learning using neural ordinary differential equations
Authors:
Hiroaki Terao,
Sho Shirasaka,
Hideyuki Suzuki
Abstract:
Nonlinear phenomena can be analyzed via linear techniques using operator-theoretic approaches. Data-driven method called the extended dynamic mode decomposition (EDMD) and its variants, which approximate the Koopman operator associated with the nonlinear phenomena, have been rapidly develo** by incorporating machine learning methods. Neural ordinary differential equations (NODEs), which are a ne…
▽ More
Nonlinear phenomena can be analyzed via linear techniques using operator-theoretic approaches. Data-driven method called the extended dynamic mode decomposition (EDMD) and its variants, which approximate the Koopman operator associated with the nonlinear phenomena, have been rapidly develo** by incorporating machine learning methods. Neural ordinary differential equations (NODEs), which are a neural network equipped with a continuum of layers, and have high parameter and memory efficiencies, have been proposed. In this paper, we propose an algorithm to perform EDMD using NODEs. NODEs are used to find a parameter-efficient dictionary which provides a good finite-dimensional approximation of the Koopman operator. We show the superiority of the parameter efficiency of the proposed method through numerical experiments.
△ Less
Submitted 17 May, 2022; v1 submitted 1 October, 2021;
originally announced October 2021.
-
An adiabatic superconductor comparator with 46 nA sensitivity
Authors:
Naoki Takeuchi,
Taiki Yamae,
Hideo Suzuki,
Nobuyuki Yoshikawa
Abstract:
Adiabatic quantum-flux-parametron (AQFP) circuits can operate with extremely small energy dissipation (~1 zJ per junction at 5 GHz) and high sensitivity (~1 μA) owing to adiabatic switching. Thus, AQFP logic is suitable to use as readout interfaces for cryogenic detectors, such as superconducting nanowire single-photon detectors (SSPDs). In order to extend the application of AQFP logic to various…
▽ More
Adiabatic quantum-flux-parametron (AQFP) circuits can operate with extremely small energy dissipation (~1 zJ per junction at 5 GHz) and high sensitivity (~1 μA) owing to adiabatic switching. Thus, AQFP logic is suitable to use as readout interfaces for cryogenic detectors, such as superconducting nanowire single-photon detectors (SSPDs). In order to extend the application of AQFP logic to various detectors, it is crucial to achieve even better sensitivity because some detectors, such as WSi SSPDs and transition edge sensors (TESs), require sub-μA sensitivity. In the present study, we propose a high-sensitivity AQFP comparator with a current transformer (CT), which increases the equivalent input current and thereby improves the sensitivity. Numerical simulation shows that the proposed comparator achieves a sensitivity approximately six times better than that of a conventional AQFP comparator. Furthermore, we demonstrate a sensitivity of 46 nA at 4.2 K for a sampling frequency of 500 Hz in the experiment.
△ Less
Submitted 23 February, 2021; v1 submitted 26 October, 2020;
originally announced October 2020.
-
Impedance Design of Excitation Lines in Adiabatic Quantum-Flux-Parametron Logic Using InductEx
Authors:
Naoki Takeuchi,
Hideo Suzuki,
Coenrad J. Fourie,
Nobuyuki Yoshikawa
Abstract:
The adiabatic quantum-flux-parametron (AQFP) is an energy-efficient superconductor logic family that utilizes adiabatic switching. AQFP gates are powered and clocked by ac excitation current; thus, to operate AQFP circuits at high clock frequencies, it is required to carefully design the characteristic impedance of excitation lines (especially, above AQFP gates) so that microwave excitation curren…
▽ More
The adiabatic quantum-flux-parametron (AQFP) is an energy-efficient superconductor logic family that utilizes adiabatic switching. AQFP gates are powered and clocked by ac excitation current; thus, to operate AQFP circuits at high clock frequencies, it is required to carefully design the characteristic impedance of excitation lines (especially, above AQFP gates) so that microwave excitation current can propagate without reflections in the entire circuit. In the present study, we design the characteristic impedance of the excitation line using InductEx, which is a three-dimensional parameter extractor for superconductor devices. We adjust the width of an excitation line using InductEx such that the characteristic impedance becomes 50 Ω even above an AQFP gate. Then, we fabricate test circuits to verify the impedance of the excitation line. We measure the impedance using the time domain reflectometry (TDR). We also measure the S parameters of the excitation line to investigate the maximum available clock frequency. Our experimental results indicate that the characteristic impedance of the excitation line agrees well with the design value even above AQFP gates, and that clock frequencies beyond 5 GHz are available in large-scale AQFP circuits.
△ Less
Submitted 12 February, 2021; v1 submitted 23 September, 2020;
originally announced September 2020.
-
Direct generation of frequency-bin entangled photons via two-period quasi-phase-matched parametric downconversion
Authors:
Fumihiro Kaneda,
Hirofumi Suzuki,
Ryosuke Shimizu,
Keiichi Edamatsu
Abstract:
We report a simple scheme for direct generation of frequency-bin entangled photon pairs via spontaneous parametric downconversion. Our fabricated nonlinear optical crystal with two different poling periods can simultaneously satisfy two different, spectrally symmetric nondegenerate quasi-phase-matching conditions, enabling the direct generation of entanglement in two discrete frequency-bin modes.…
▽ More
We report a simple scheme for direct generation of frequency-bin entangled photon pairs via spontaneous parametric downconversion. Our fabricated nonlinear optical crystal with two different poling periods can simultaneously satisfy two different, spectrally symmetric nondegenerate quasi-phase-matching conditions, enabling the direct generation of entanglement in two discrete frequency-bin modes. Our produced photon pairs exhibited Hong-Ou-Mandel interference with high-visibility beating oscillations, a signature of two-mode frequency-bin entanglement. Moreover, we demonstrate deterministic entanglement-mode conversion from frequency-bin to polarization modes, with which our source can be more versatile for various quantum applications. Our scheme can be extended to direct generation of high-dimensional frequency-bin entanglement, and thus will be a key technology for frequency-multiplexed optical quantum information processing.
△ Less
Submitted 4 October, 2018;
originally announced October 2018.
-
Letter of Intent: A New QCD facility at the M2 beam line of the CERN SPS (COMPASS++/AMBER)
Authors:
B. Adams,
C. A. Aidala,
R. Akhunzyanov,
G. D. Alexeev,
M. G. Alexeev,
A. Amoroso,
V. Andrieux,
N. V. Anfimov,
V. Anosov,
A. Antoshkin,
K. Augsten,
W. Augustyniak,
C. D. R. Azevedo,
A. Azhibekov,
B. Badelek,
F. Balestra,
M. Ball,
J. Barth,
R. Beck,
Y. Bedfer,
J. Berenguer Antequera,
J. C. Bernauer,
J. Bernhard,
M. Bodlak,
P. Bordalo
, et al. (242 additional authors not shown)
Abstract:
A New QCD facility at the M2 beam line of the CERN SPS
COMPASS++/AMBER
A New QCD facility at the M2 beam line of the CERN SPS
COMPASS++/AMBER
△ Less
Submitted 25 January, 2019; v1 submitted 2 August, 2018;
originally announced August 2018.
-
Commissioning of the BRIKEN detector for the measurement of very exotic beta-delayed neutron emitters
Authors:
A. Tolosa-Delgado,
J. Agramunt,
J. L. Tain,
A. Algora,
C. Domingo-Pardo,
A. I. Morales,
B. Rubio,
A. Tarifeno-Saldivia,
F. Calvino,
G. Cortes,
N. T. Brewer,
B. C. Rasco,
K. P. Rykaczewski,
D. W. Stracener,
J. M. Allmond,
R. Grzywacz,
R. Yokoyama,
M. Singh,
T. King,
M. Madurga,
S. Nishimura,
V. H. Phong,
S. Go,
J. Liu,
K. Matsui
, et al. (41 additional authors not shown)
Abstract:
A new detection system has been installed at the RIKEN Nishina Center (Japan) to investigate decay properties of very neutron-rich nuclei. The setup consists of three main parts: a moderated neutron counter, a detection system sensitive to the implantation and decay of radioactive ions, and gamma-ray detectors. We describe here the setup, the commissioning experiment and some selected results demo…
▽ More
A new detection system has been installed at the RIKEN Nishina Center (Japan) to investigate decay properties of very neutron-rich nuclei. The setup consists of three main parts: a moderated neutron counter, a detection system sensitive to the implantation and decay of radioactive ions, and gamma-ray detectors. We describe here the setup, the commissioning experiment and some selected results demonstrating its performance for the measurement of half-lives and beta-delayed neutron emission probabilities. The methodology followed in the analysis of the data is described in detail. Particular emphasis is placed on the correction of the accidental neutron background.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
Polarised target for Drell-Yan experiment in COMPASS at CERN, part I
Authors:
J. Matousek,
M. Finger,
M. Finger Jr.,
M. Pesek,
A. Berlin,
F. Gautheron,
W. Meyer,
G. Reicherz,
N. Doshita,
T. Iwata,
K. Kondo,
Y. Miyachi,
H. Matsuda,
G. Nukazuka,
N. Horikawa,
H. Suzuki,
S. Ishimoto,
Y. Kisselev,
J. Koivuniemi,
T. Tatsuro
Abstract:
In the polarised Drell-Yan experiment at the COMPASS facility in CERN pion beam with momentum of 190 GeV/c and intensity about $10^8$ pions/s interacted with transversely polarised NH$_3$ target. Muon pairs produced in Drel-Yan process were detected. The measurement was done in 2015 as the 1st ever polarised Drell-Yan fixed target experiment. The hydrogen nuclei in the solid-state NH$_3$ were pola…
▽ More
In the polarised Drell-Yan experiment at the COMPASS facility in CERN pion beam with momentum of 190 GeV/c and intensity about $10^8$ pions/s interacted with transversely polarised NH$_3$ target. Muon pairs produced in Drel-Yan process were detected. The measurement was done in 2015 as the 1st ever polarised Drell-Yan fixed target experiment. The hydrogen nuclei in the solid-state NH$_3$ were polarised by dynamic nuclear polarisation in 2.5 T field of large-acceptance superconducting magnet. Large helium dilution cryostat was used to cool the target down below 100 mK. Polarisation of hydrogen nuclei reached during the data taking was about 80 %. Two oppositely polarised target cells, each 55 cm long and 4 cm in diameter were used. Overview of COMPASS facility and the polarised target with emphasis on the dilution cryostat and magnet is given. Results of the polarisation measurement in the Drell-Yan run and overviews of the target material, cell and dynamic nuclear polarisation system are given in the part II.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Smoothing effect for spatially distributed renewable resources and its impact on power grid robustness
Authors:
Motoki Nagata,
Yoshito Hirata,
Naoya Fujiwara,
Gouhei Tanaka,
Hideyuki Suzuki,
Kazuyuki Aihara
Abstract:
In this paper, we show that spatial correlation of renewable energy outputs greatly influences the robustness of power grids. First, we propose a new index for the spatial correlation among renewable energy outputs. We find that the spatial correlation of renewable energy outputs in a short time-scale is as weak as that caused by independent random variables and that in a long time-scale is as str…
▽ More
In this paper, we show that spatial correlation of renewable energy outputs greatly influences the robustness of power grids. First, we propose a new index for the spatial correlation among renewable energy outputs. We find that the spatial correlation of renewable energy outputs in a short time-scale is as weak as that caused by independent random variables and that in a long time-scale is as strong as that under perfect synchronization. Then, by employing the topology of the power grid in eastern Japan, we analyze the robustness of the power grid with spatial correlation of renewable energy outputs. The analysis is performed by using a realistic differential-algebraic equations model and the result shows that the spatial correlation of the energy resources strongly degrades the robustness of the power grid. Our result suggests that the spatial correlation of the renewable energy outputs should be taken into account when estimating the stability of power grids.
△ Less
Submitted 15 September, 2015;
originally announced September 2015.
-
Measurement and comparison of individual external doses of high-school students living in Japan, France, Poland and Belarus -- the "D-shuttle" project --
Authors:
N. Adachi,
V. Adamovitch,
Y. Adjovi,
K. Aida,
H. Akamatsu,
S. Akiyama,
A. Akli,
A. Ando,
T. Andrault,
H. Antonietti,
S. Anzai,
G. Arkoun,
C. Avenoso,
D. Ayrault,
M. Banasiewicz,
M. Banaśkiewicz,
L. Bernandini,
E. Bernard,
E. Berthet,
M. Blanchard,
D. Boreyko,
K. Boros,
S. Charron,
P. Cornette,
K. Czerkas
, et al. (208 additional authors not shown)
Abstract:
Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereab…
▽ More
Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereabouts and activities. The distributions of annual external doses estimated for each region overlap with each other, demonstrating that the personal external individual doses in locations where residence is currently allowed in Fukushima Prefecture and in Belarus are well within the range of estimated annual doses due to the background radiation level of other regions/countries.
△ Less
Submitted 18 November, 2015; v1 submitted 21 June, 2015;
originally announced June 2015.
-
The COMPASS Setup for Physics with Hadron Beams
Authors:
Ph. Abbon,
C. Adolph,
R. Akhunzyanov,
Yu. Alexandrov,
M. G. Alexeev,
G. D. Alexeev,
A. Amoroso,
V. Andrieux,
V. Anosov,
A. Austregesilo,
B. Badelek,
F. Balestra,
J. Barth,
G. Baum,
R. Beck,
Y. Bedfer,
A. Berlin,
J. Bernhard,
K. Bicker,
E. R. Bielert,
J. Bieling,
R. Birsa,
J. Bisplinghoff,
M. Bodlak,
M. Boer
, et al. (207 additional authors not shown)
Abstract:
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well…
▽ More
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well as new or upgraded detectors. The hadron setup is able to operate at the high incident hadron flux available at CERN. It is characterised by large angular and momentum coverages, large and nearly flat acceptances, and good two and three-particle mass resolutions. In 2008 and 2009 it was successfully used with positive and negative hadron beams and with liquid hydrogen and solid nuclear targets. This article describes the new and upgraded detectors and auxiliary equipment, outlines the reconstruction procedures used, and summarises the general performance of the setup.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Identification and Separation of Radioactive Isotope Beams by the BigRIPS Separator at the RIKEN RI Beam Factory
Authors:
N. Fukuda,
T. Kubo,
T. Ohnishi,
N. Inabe,
H. Takeda,
D. Kameda,
H. Suzuki
Abstract:
We have developed a method for achieving excellent resolving power in in-flight particle identification of radioactive isotope (RI) beams at the BigRIPS fragment separator at the RIKEN Nishina Center RI Beam Factory (RIBF). In the BigRIPS separator, RI beams are identified by their atomic number Z and mass-to-charge ratio A/Q which are deduced from the measurements of time of flight (TOF), magneti…
▽ More
We have developed a method for achieving excellent resolving power in in-flight particle identification of radioactive isotope (RI) beams at the BigRIPS fragment separator at the RIKEN Nishina Center RI Beam Factory (RIBF). In the BigRIPS separator, RI beams are identified by their atomic number Z and mass-to-charge ratio A/Q which are deduced from the measurements of time of flight (TOF), magnetic rigidity (Brho) and energy loss (delta-E), and delivered as tagged RI beams to a variety of experiments including secondary reaction measurements. High A/Q resolution is an essential requirement for this scheme, because the charge state Q of RI beams has to be identified at RIBF energies such as 200-300 MeV/nucleon. By precisely determining the Brho and TOF values, we have achieved relative A/Q resolution as good as 0.034% (root-mean-square value). The achieved A/Q resolution is high enough to clearly identify the charge state Q in the Z versus A/Q particle identification plot, where fully-stripped and hydrogen-like peaks are very closely located. The precise Brho determination is achieved by refined particle trajectory reconstruction, while a slew correction is performed to precisely determine the TOF value. Furthermore background events are thoroughly removed to improve reliability of the particle identification. In the present paper we present the details of the particle identification scheme in the BigRIPS separator. The isotope separation in the BigRIPS separator is also briefly introduced.
△ Less
Submitted 30 October, 2013;
originally announced October 2013.
-
Extraction of 3D field maps of magnetic multipoles from 2D surface measurements with applications to the optics calculations of the large-acceptance superconducting fragment separator BigRIPS
Authors:
Hiroyuki Takeda,
Toshiyuki Kubo,
Kensuke Kusaka,
Hiroshi Suzuki,
Naohito Inabe,
Jerry A. Nolen
Abstract:
The fringing fields of magnets with large apertures and short lengths greatly affect ion-optical calculations. In particular, for a high magnetic field where the iron core becomes saturated, the effective lengths and shapes of the field distribution must be considered because they change with the excitation current. Precise measurement of the three-dimensional magnetic fields and the correct appli…
▽ More
The fringing fields of magnets with large apertures and short lengths greatly affect ion-optical calculations. In particular, for a high magnetic field where the iron core becomes saturated, the effective lengths and shapes of the field distribution must be considered because they change with the excitation current. Precise measurement of the three-dimensional magnetic fields and the correct application of parameters in the ion-optical calculations are necessary. First we present a practical numerical method of extracting full 3D magnetic field maps of magnetic multipoles from 2D field measurements of the surface of a cylinder. Using this novel method we extracted the distributions along the beam axis for the coefficient of the first-order quadrupole component, which is the leading term of the quadrupole components in the multipole expansion of magnetic fields and proportional to the distance from the axis. Higher order components of the 3D magnetic field can be extracted from the leading term via recursion relations. The measurements were done for many excitation current values for the large-aperture superconducting triplet quadrupole magnets (STQs) in the BigRIPS fragment separator at the RIKEN Nishina Center RI Beam Factory. These distributions were parameterized using the Enge functions to fit the fringe field shapes at all excitation current values, so that unmeasured values are interpolated. The extracted distributions depend only on the position along the beam axis, and thus the measured three-dimensional field can easily be parameterized for ion-optical calculations. We implemented these parameters in the ion-optical calculation code COSY INFINITY and realized a first-order calculation that incorporates the effect of large and varying fringe fields more accurately. We applied the calculation to determine the excitation current settings of the STQs...
△ Less
Submitted 30 October, 2013;
originally announced October 2013.
-
Spin-Echo-Based Magnetometry with Spinor Bose-Einstein Condensates
Authors:
Yujiro Eto,
Hayato Ikeda,
Hirosuke Suzuki,
Sho Hasegawa,
Yasushi Tomiyama,
Sawako Sekine,
Mark Sadgrove,
Takuya Hirano
Abstract:
We demonstrate detection of a weak alternate-current magnetic field by application of the spin echo technique to F = 2 Bose-Einstein condensates. A magnetic field sensitivity of 12 pT/Hz^1/2 is attained with the atom number of 5*10^3 at spatial resolution of 99 μm^2. Our observations indicate magnetic field fluctuations synchronous with the power supply line frequency. We show that this noise is g…
▽ More
We demonstrate detection of a weak alternate-current magnetic field by application of the spin echo technique to F = 2 Bose-Einstein condensates. A magnetic field sensitivity of 12 pT/Hz^1/2 is attained with the atom number of 5*10^3 at spatial resolution of 99 μm^2. Our observations indicate magnetic field fluctuations synchronous with the power supply line frequency. We show that this noise is greatly suppressed by application of a reverse phase magnetic field. Our technique is useful in order to create a stable magnetic field environment, which is an important requirement for atomic experiments which require a weak bias magnetic field.
△ Less
Submitted 5 June, 2013;
originally announced June 2013.
-
Duality in potential curve crossing: Application to quantum coherence
Authors:
Kazuo Fujikawa,
Hiroshi Suzuki
Abstract:
A field dependent $su(2)$ gauge transformation connects between the adiabatic and diabatic pictures in the (Landau-Zener-Stueckelberg) potential curve crossing problem. It is pointed out that weak and strong potential curve crossing interactions are interchanged under this transformation, and thus realizing a naive strong and weak duality. A reliable perturbation theory should thus be formulated…
▽ More
A field dependent $su(2)$ gauge transformation connects between the adiabatic and diabatic pictures in the (Landau-Zener-Stueckelberg) potential curve crossing problem. It is pointed out that weak and strong potential curve crossing interactions are interchanged under this transformation, and thus realizing a naive strong and weak duality. A reliable perturbation theory should thus be formulated in the both limits of weak and strong interactions. In fact, main characteristics of the potential crossing phenomena such as the Landau-Zener formula including its numerical coefficient are well-described by simple (time-independent) perturbation theory without referring to Stokes phenomena. We also show that quantum coherence in a double well potential is generally suppressed by the effect of potential curve crossing, which is analogous to the effect of Ohmic dissipation on quantum coherence.
△ Less
Submitted 23 July, 1997; v1 submitted 8 April, 1997;
originally announced April 1997.
