-
Characterization of the BOLDPET optical prototype, an innovative Cherenkov detector for 511 keV $γ$ radiation
Authors:
Roman Chyzh,
Gerard Tauzin,
Dominique Yvon,
Chi-Hsun Sung,
Dominique Breton,
Jihane Maalmi,
Klaus Schäfers,
Christian Weinheimer,
Viatcheslav Sharyy
Abstract:
In the present work we describe the design, construction, and testing of the optical prototype developed for the BOLDPET project, with the objective of creating a PET detection module with high spatial and time resolution. The BOLDPET technology uses an innovative detection liquid, trimethylbismuth, for detecting 511 keV $γ$-quanta resulting from positron annihilation. The optical signal is exclus…
▽ More
In the present work we describe the design, construction, and testing of the optical prototype developed for the BOLDPET project, with the objective of creating a PET detection module with high spatial and time resolution. The BOLDPET technology uses an innovative detection liquid, trimethylbismuth, for detecting 511 keV $γ$-quanta resulting from positron annihilation. The optical signal is exclusively produced through the Cherenkov mechanism, and the produced photons are detected using Planacon microchannel-plate photomultiplier. We achieve an excellent time resolution of 150 ps (FWHM) within a sizable detection volume measuring 55 mm x 55 mm x 25 mm. Through detailed Geant4 simulations, we examine the limiting factors affecting time resolution and explore potential avenues for improvement. Furthermore, we demonstrate the feasibility of coarse 2D localization of interactions using the optical signal alone, achieving a precision of about 5-8 mm (FWHM) within the homogeneous detection volume.
△ Less
Submitted 2 July, 2024; v1 submitted 30 January, 2024;
originally announced January 2024.
-
First ClearMind gamma detector prototype for TOF-PET imaging
Authors:
A. Galindo-Tellez,
V. Sharyy,
C. -H. Sung,
M. Follin,
L. Cappellugola,
S. Curtoni,
M. Dupont,
C. Morel,
D. Breton,
J. Maalmi,
D. Yvon
Abstract:
The ClearMind project aims to develop a TOF-PET position-sensitive detection module optimized for time and spatial resolutions and detection efficiency. For this, we use a 59 mm $\times$ 59 mm $\times$ 5 mm monolithic PbWO$_4$ (PWO) crystal, which is encapsulated within a commercial Micro-Channel Plate Photomultiplier tube MAPMT253 with a bialkali photocathode directly deposited on the crystal. We…
▽ More
The ClearMind project aims to develop a TOF-PET position-sensitive detection module optimized for time and spatial resolutions and detection efficiency. For this, we use a 59 mm $\times$ 59 mm $\times$ 5 mm monolithic PbWO$_4$ (PWO) crystal, which is encapsulated within a commercial Micro-Channel Plate Photomultiplier tube MAPMT253 with a bialkali photocathode directly deposited on the crystal. We report the proof of concept of the directly deposited of a bialkali photocathode on a PWO crystal and its stability over time. The full calibration of the ClearMind photodetector module in the single-photoelectron regime is described. We measured a time resolution of 70 ps FWHM using a 20 ps pulsed laser. We present the performance of the prototype used in coincidence with a 3 $\times$ 3 $\times$ 3 mm$^3$ LYSO:Ca,Ce crystal readout by a SiPM. We obtained a coincidence time resolution of 350 ps FWHM, a spatial resolution of 4 to 5 mm, and a detection efficiency of 28 %, consistent with Monte Carlo simulations of the ClearMind detector module.
△ Less
Submitted 27 June, 2024; v1 submitted 20 December, 2023;
originally announced December 2023.
-
Deep Learning reconstruction with uncertainty estimation for $γ$ photon interaction in fast scintillator detectors
Authors:
Geoffrey Daniel,
Mohamed Bahi Yahiaoui,
Claude Comtat,
Sebastien Jan,
Olga Kochebina,
Jean-Marc Martinez,
Viktoriya Sergeyeva,
Viatcheslav Sharyy,
Chi-Hsun Sung,
Dominique Yvon
Abstract:
This article presents a physics-informed deep learning method for the quantitative estimation of the spatial coordinates of gamma interactions within a monolithic scintillator, with a focus on Positron Emission Tomography (PET) imaging. A Density Neural Network approach is designed to estimate the 2-dimensional gamma photon interaction coordinates in a fast lead tungstate (PbWO4) monolithic scinti…
▽ More
This article presents a physics-informed deep learning method for the quantitative estimation of the spatial coordinates of gamma interactions within a monolithic scintillator, with a focus on Positron Emission Tomography (PET) imaging. A Density Neural Network approach is designed to estimate the 2-dimensional gamma photon interaction coordinates in a fast lead tungstate (PbWO4) monolithic scintillator detector. We introduce a custom loss function to estimate the inherent uncertainties associated with the reconstruction process and to incorporate the physical constraints of the detector.
This unique combination allows for more robust and reliable position estimations and the obtained results demonstrate the effectiveness of the proposed approach and highlights the significant benefits of the uncertainties estimation. We discuss its potential impact on improving PET imaging quality and show how the results can be used to improve the exploitation of the model, to bring benefits to the application and how to evaluate the validity of the given prediction and the associated uncertainties. Importantly, our proposed methodology extends beyond this specific use case, as it can be generalized to other applications beyond PET imaging.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Transverse Emittance Reduction in Muon Beams by Ionization Cooling
Authors:
The MICE Collaboration,
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic,
M. Savic
, et al. (112 additional authors not shown)
Abstract:
Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from pro…
▽ More
Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from proton collisions. Ionization cooling is the technique proposed to decrease the muon beam phase-space volume. Here we demonstrate a clear signal of ionization cooling through the observation of transverse emittance reduction in beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon Ionization Cooling Experiment (MICE). The measurement is well reproduced by the simulation of the experiment and the theoretical model. The results shown here represent a substantial advance towards the realization of muon-based facilities that could operate at the energy and intensity frontiers.
△ Less
Submitted 13 October, 2023; v1 submitted 9 October, 2023;
originally announced October 2023.
-
Detailed simulation for the ClearMind prototype detection module and event reconstruction using artificial intelligence
Authors:
Chi-Hsun Sung,
Laurie Cappellugola,
Megane Follin,
Sébastien Curtoni,
Mathieu Dupont,
Christian Morel,
Aline Galindo-Tellez,
Roman Chyzh,
Dominique Breton,
Jihane Maalmi,
Dominique Yvon,
Viatcheslav Sharyy
Abstract:
The ClearMind project aims to develop the TOF-PET position sensitive detection module optimized for the time resolution, spatial resolution, and detection efficiency. For this, the ClearMind project uses a large (59 $\times$ 59 mm$^2$) monolithic PbWO$_4$ (PWO) scintillating crystal with a bialkali photo-electric layer deposited directly on the crystal. Scintillation and Cherenkov photons result t…
▽ More
The ClearMind project aims to develop the TOF-PET position sensitive detection module optimized for the time resolution, spatial resolution, and detection efficiency. For this, the ClearMind project uses a large (59 $\times$ 59 mm$^2$) monolithic PbWO$_4$ (PWO) scintillating crystal with a bialkali photo-electric layer deposited directly on the crystal. Scintillation and Cherenkov photons result together from the 511 keV gamma-ray interation into the PWO crystal. A micro-channel plate photomultiplier tube (MCP-PMT) encapsulating the PWO crystal amplifies photoelectrons generated at the photocathode, and the corresponding anode signals are collected through the transmission lines read out at both ends and digitized by a SAMPIC module. In this work, we present a realistic Geant4 simulation of the ClearMind prototype detector, including the propagation of the visible photons in the crystal, the modelling of a realistic response of the photocathode and of the PMT, and the propagation of the electrical signals over the transmission lines. The reconstruction of the gamma conversion in the detector volume is performed from the signals registered at both ends of the transmission lines. We compare the reconstruction precision of a statistical algorithm against machine learning algorithms developed using the TMVA package. We expect to reach a spatial resolution down to a few mm$^3$ (FWHM). Finally, we will discuss prospects for the ClearMind detector.
△ Less
Submitted 26 January, 2023; v1 submitted 23 September, 2022;
originally announced September 2022.
-
Multiple Coulomb Scattering of muons in Lithium Hydride
Authors:
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic,
M. Savic
, et al. (112 additional authors not shown)
Abstract:
Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liq…
▽ More
Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liquid hydrogen or lithium hydride (LiH) energy absorber as part of a programme to develop muon accelerator facilities, such as a Neutrino Factory or a Muon Collider. The energy loss and MCS that occur in the absorber material are competing effects that alter the performance of the cooling channel. Therefore measurements of MCS are required in order to validate the simulations used to predict the cooling performance in future accelerator facilities. We report measurements made in the MICE apparatus of MCS using a LiH absorber and muons within the momentum range 160 to 245 MeV/c. The measured RMS scattering width is about 9% smaller than that predicted by the approximate formula proposed by the Particle Data Group. Data at 172, 200 and 240 MeV/c are compared to the GEANT4 (v9.6) default scattering model. These measurements show agreement with this more recent GEANT4 (v9.6) version over the range of incident muon momenta.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
Accelerating reactive-flow simulations using vectorized chemistry integration
Authors:
Nicholas J. Curtis,
Kyle E. Niemeyer,
Chih-Jen Sung
Abstract:
The high cost of chemistry integration is a significant computational bottleneck for realistic reactive-flow simulations using operator splitting. Here we present a methodology to accelerate the solution of the chemical kinetic ordinary differential equations using single-instruction, multiple-data vector processing on CPUs using the OpenCL framework. First, we compared several vectorized integrat…
▽ More
The high cost of chemistry integration is a significant computational bottleneck for realistic reactive-flow simulations using operator splitting. Here we present a methodology to accelerate the solution of the chemical kinetic ordinary differential equations using single-instruction, multiple-data vector processing on CPUs using the OpenCL framework. First, we compared several vectorized integration algorithms using chemical kinetic source terms and analytical Jacobians from the pyJac software against a widely used integration code, CVODEs. Next, we extended the OpenFOAM computational fluid dynamics library to incorporate the vectorized solvers, and we compared the accuracy of a fourth-order linearly implicit integrator -- both in vectorized form and a corresponding method native to OpenFOAM -- with the community standard chemical kinetics library Cantera. We then applied our methodology to a variety of chemical kinetic models, turbulent intensities, and simulation scales to examine a range of engineering and scientific scale problems, including (pseudo) steady-state as well as time-dependent Reynolds-averaged Navier--Stokes simulations of the Sandia flame D and the Volvo Flygmotor bluff-body stabilized, premixed flame. Subsequently, we compared the performance of the vectorized and native OpenFOAM integrators over the studied models and simulations and found that our vectorized approach performs up to 33--35x faster than the native OpenFOAM solver with high accuracy.
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
Visualization of Band Shifting and Interlayer Coupling in WxMo1-xS2 Alloys using Near-Field Broadband Absorption Microscopy
Authors:
Po-Wen Tang,
Shiue-Yuan Shiau,
He-Chun Chou,
Xin-Quan Zhang,
Jia-Ru Yu,
Chun-Te Sung,
Yi-Hsien - Lee,
Chi Chen
Abstract:
Beyond-diffraction-limit optical absorption spectroscopy provides profound information on the graded band structures of composition-spread and stacked two-dimensional materials, in which direct/indirect bandgap, interlayer coupling, sliding, and possible defects significantly modify their optoelectronic functionalities such as photoluminescence efficiency. We here visualize the spatially-varying b…
▽ More
Beyond-diffraction-limit optical absorption spectroscopy provides profound information on the graded band structures of composition-spread and stacked two-dimensional materials, in which direct/indirect bandgap, interlayer coupling, sliding, and possible defects significantly modify their optoelectronic functionalities such as photoluminescence efficiency. We here visualize the spatially-varying band structure of monolayer and bilayer transition metal dichalcogenide alloys for the first time by using near-field broadband absorption microscopy. The near-field-spectral and -spatial diagrams manifest the excitonic band shift that results from the interplay of composition spreading and interlayer coupling. These results enable us to identify the top layer of the bilayer alloy as pure WS2. We also use the aberration-free near-field transmittance images to demarcate the exact boundaries of alloyed and pure transition metal dichalcogenides. This technology can offer new insights on various layered structures in the era of stacking science in quest of novel quantum optoelectronic devices.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Overview and Introduction to Development of Non-Ergodic Earthquake Ground-Motion Models
Authors:
Grigorios Lavrentiadis,
Norman A. Abrahamson,
Kuehn M. Nicolas,
Yousef Bozorgnia,
Christine A. Goulet,
Anže Babič,
Jorge Macedo,
Matjaž Dolšek,
Nicholas Gregor,
Albert R. Kottke,
Maxime Lacour,
Chenying Liu,
Xiaofeng Meng,
Van-Bang Phung,
Chih-Hsuan Sung,
Melanie Walling
Abstract:
This paper provides an overview and introduction to the development of non-ergodic ground-motion models, GMMs. It is intended for a reader who is familiar with the standard approach for develo** ergodic GMMs. It starts with a brief summary of the development of ergodic GMMs and then describes different methods that are used in the development of non-ergodic GMMs with an emphasis on Gaussian Proc…
▽ More
This paper provides an overview and introduction to the development of non-ergodic ground-motion models, GMMs. It is intended for a reader who is familiar with the standard approach for develo** ergodic GMMs. It starts with a brief summary of the development of ergodic GMMs and then describes different methods that are used in the development of non-ergodic GMMs with an emphasis on Gaussian Process (GP) regression, as that is currently the method preferred by most researchers contributing to this special issue. Non-ergodic modeling requires the definition of locations for the source and site characterizing the systematic source and site effects; the non-ergodic domain is divided into cells for describing the systematic path effects. Modeling the cell-specific anelastic attenuation as a GP and considerations on constraints for extrapolation of the non-ergodic GMMs are also discussed. An updated unifying notation for non-ergodic GMMs is also presented, which has been adopted by the authors of this issue.
△ Less
Submitted 13 September, 2022; v1 submitted 15 November, 2021;
originally announced November 2021.
-
High resolution MCP-PMT Readout Using Transmission Lines
Authors:
M. Follin,
R. Chyzh,
C. -H. Sung,
D. Breton,
J. Maalmi,
T. Chaminade,
E. Delagnes,
K. Schäfers,
C. Weinheimer,
D. Yvon,
V. Sharyy
Abstract:
We study the potential of the MCP-PMT read-out to detect single photo-electron using transmission lines. Such a solution limits the number of read-out channels, has a uniform time resolution across the PMT surface and provides quasi-continuous measurement of the spatial coordinates. The proposed solution is designed to be used in the BOLD-PET project aiming to develop an innovative detection modul…
▽ More
We study the potential of the MCP-PMT read-out to detect single photo-electron using transmission lines. Such a solution limits the number of read-out channels, has a uniform time resolution across the PMT surface and provides quasi-continuous measurement of the spatial coordinates. The proposed solution is designed to be used in the BOLD-PET project aiming to develop an innovative detection module for the positron emission tomography using the liquid detection media, the tri-methyl bismuth. In this study we use the commercial MCP-PMT Planacon from Photonis, with 32x32 anode structure. The PCB gathers signals from anode pads in 32 transmission lines which are read-out from both ends. Amplifier boards and SAMPIC modules, developed in our labs, allow us to realize the cost-effective, multi-channel digitization of signals with excellent precision. For a single photo-electron, we measured a time resolution of 70~ps (FWHM) simultaneously with a spatial accuracy of 1.6~mm and 0.9~mm (FWHM) along and across transmission lines correspondingly.
△ Less
Submitted 25 November, 2021; v1 submitted 7 August, 2021;
originally announced August 2021.
-
Performance of the MICE diagnostic system
Authors:
The MICE collaboration,
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic
, et al. (113 additional authors not shown)
Abstract:
Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at…
▽ More
Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. This paper documents the performance of the detectors used in MICE to measure the muon-beam parameters, and the physical properties of the liquid hydrogen energy absorber during running.
△ Less
Submitted 16 August, 2021; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Inlet temperature driven supercritical bifurcation of combustion instabilities in a lean premixed prevaporized combustor
Authors:
X. Han,
D. Laera,
A. S. Morgans,
Y. Z. Lin,
Z. Zhang,
X. Hui,
C. J. Sung
Abstract:
The present article reports experimental observation and analyses of a supercritical bifurcation of combustion instabilities triggered by the air inlet temperature (Ta). The studies are performed with a pressurised kerosene fuelled Lean Premixed Prevaporized (LPP) combustor operated under elevated temperature. Unlike some previous studies, starting from an unstable condition of the system, the amp…
▽ More
The present article reports experimental observation and analyses of a supercritical bifurcation of combustion instabilities triggered by the air inlet temperature (Ta). The studies are performed with a pressurised kerosene fuelled Lean Premixed Prevaporized (LPP) combustor operated under elevated temperature. Unlike some previous studies, starting from an unstable condition of the system, the amplitude of combustion instabilities suddenly decrease when Ta exceeds a critical value of Ta =570 K. When the temperature is lowered back the system returns to being unstable without featuring any hysteresis behaviour, as expected in case of a supercritical bifurcation. The unstable flames feature a periodic axial motion of lift-off and re-ignition, characterized as Helmholtz mode. The phase difference between chemiluminescence and pressure signals is found to increase with Ta, exceeding 90 degrees (out of phase) for temperatures higher than 570 K. A low order network framework is conducted, illustrating that when Ta is increased a stability shift of this mode is predicted at Ta near 570 K, in good agreement with the experimental observations. The impact of Ta on the spray characteristics is also examined, finding that higher Ta promotes fuel evaporation and reduces equivalence ratio fluctuation at the exit of the swirler.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Flame interactions in a stratified swirl burner: flame stabilization, combustion instabilities and beating oscillations
Authors:
X. Han,
D. Laera,
D. Yang,
C. Zhang,
J. Wang,
X. Hui,
Y. Lin,
A. S. Morgans,
C. J. Sung
Abstract:
The present article investigates the interactions between the pilot and main flames in a novel stratified swirl burner using both experimental and numerical methods. Experiments are conducted in a test rig operating at atmospheric conditions. The system is equipped with the BASIS (Beihang Axial Swirler Independently-Stratified) burner fuelled with premixed methane-air mixtures. To illustrate the i…
▽ More
The present article investigates the interactions between the pilot and main flames in a novel stratified swirl burner using both experimental and numerical methods. Experiments are conducted in a test rig operating at atmospheric conditions. The system is equipped with the BASIS (Beihang Axial Swirler Independently-Stratified) burner fuelled with premixed methane-air mixtures. To illustrate the interactions between the pilot and main flames, three operating modes are studied, where the burner works with: (i) only the pilot flame, (ii) only the main flame, and (iii) the stratified flame (with both the pilot and main flames). We found that: (1) In the pilot flame mode, the flame changes from V-shape to M-shape when the main stage is switched from closed to supplying a pure air stream. Strong oscillations in the M-shape flame are found due to the dilution of the main air to the pilot methane flame. (2) In the main flame mode, the main flame is lifted off from the burner if the pilot stage is supplied with air. The temperature of the primary recirculation zone drops substantially and the unsteady heat release is intensified. (3) In the stratified flame mode, unique beating oscillations exhibiting dual closely-spaced frequencies in the pressure spectrum. is found. This is observed within over narrow window of equivalence ratio combinations between the pilot and main stages. Detailed analysis of the experimental data shows that flame dynamics and thermoacoustic couplings at these two frequencies are similar to those of the unstable pilot flame and the attached main flame cases, respectively. Large Eddy Simulations (LESs) are carried out with OpenFOAM to understand the mechanisms of the time averaged flame shapes in different operating modes. Finally, a simple acoustic analysis is proposed to understand the acoustic mode nature of the beating oscillations.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Axion Dark Matter Research with IBS/CAPP
Authors:
Yannis K. Semertzidis,
Jihn E. Kim,
SungWoo Youn,
Jihoon Choi,
Woohyun Chung,
Selcuk Haciomeroglu,
Dongmin Kim,
**geun Kim,
ByeongRok Ko,
Ohjoon Kwon,
Andrei Matlashov,
Lino Miceli,
Hiroaki Natori,
Seongtae Park,
MyeongJae Lee,
Soohyung Lee,
Elena Sala,
Yunchang Shin,
Taehyeon Seong,
Sergey Uchaykin,
Danho Ahn,
Saebyeok Ahn,
Seung Pyo Chang,
Wheeyeon Cheong,
Hoyong Jeong
, et al. (12 additional authors not shown)
Abstract:
The axion, a consequence of the PQ mechanism, has been considered as the most elegant solution to the strong-CP problem and a compelling candidate for cold dark matter. The Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) was established on 16 October 2013 with a main objective to launch state of the art axion experiments in South Korea. Relying on th…
▽ More
The axion, a consequence of the PQ mechanism, has been considered as the most elegant solution to the strong-CP problem and a compelling candidate for cold dark matter. The Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) was established on 16 October 2013 with a main objective to launch state of the art axion experiments in South Korea. Relying on the haloscope technique, our strategy is to run several experiments in parallel to explore a wide range of axion masses with sensitivities better than the QCD axion models. We utilize not only the advanced technologies, such as high-field large-volume superconducting (SC) magnets, ultra low temperature dilution refrigerators, and nearly quantum-limited noise amplifiers, but also some unique features solely developed at the Center, including high-quality SC resonant cavities surviving high magnetic fields and efficient cavity geometries to reach high-frequency regions. Our goal is to probe axion dark matter in the frequency range of 1-10 GHz in the first phase and then ultimately up to 25 GHz, even in a scenario where axions constitute only 10% of the local dark matter halo. In this report, the current status and future prospects of the experiments and R&D activities at IBS/CAPP are described.
△ Less
Submitted 25 October, 2019;
originally announced October 2019.
-
First demonstration of ionization cooling by the Muon Ionization Cooling Experiment
Authors:
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
D. Jokovic,
D. Maletic,
M. Savic,
N. Jovancevic
, et al. (110 additional authors not shown)
Abstract:
High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced…
▽ More
High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced in the interaction of a proton beam with a target. To produce a high-brightness beam from such a source requires that the phase space volume occupied by the muons be reduced (cooled). Ionization cooling is the novel technique by which it is proposed to cool the beam. The Muon Ionization Cooling Experiment collaboration has constructed a section of an ionization cooling cell and used it to provide the first demonstration of ionization cooling. We present these ground-breaking measurements.
△ Less
Submitted 19 July, 2019;
originally announced July 2019.
-
A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment
Authors:
M. Abe,
S. Bae,
G. Beer,
G. Bunce,
H. Choi,
S. Choi,
M. Chung,
W. da Silva,
S. Eidelman,
M. Finger,
Y. Fukao,
T. Fukuyama,
S. Haciomeroglu,
K. Hasegawa,
K. Hayasaka,
N. Hayashizaki,
H. Hisamatsu,
T. Iijima,
H. Iinuma,
K. Inami,
H. Ikeda,
M. Ikeno,
K. Ishida,
T. Itahashi,
M. Iwasaki
, et al. (71 additional authors not shown)
Abstract:
This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon…
▽ More
This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$.
△ Less
Submitted 10 March, 2019; v1 submitted 10 January, 2019;
originally announced January 2019.
-
First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment
Authors:
The MICE Collaboration,
D. Adams,
D. Adey,
R. Asfandiyarov,
G. Barber,
A. de Bari,
R. Bayes,
V. Bayliss,
R. Bertoni,
V. Blackmore,
A. Blondel,
J. Boehm,
M. Bogomilov,
M. Bonesini,
C. N. Booth,
D. Bowring,
S. Boyd,
T. W. Bradshaw,
A. D. Bross,
C. Brown,
L. Coney,
G. Charnley,
G. T. Chatzitheodoridis,
F. Chignoli,
M. Chung
, et al. (111 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification s…
▽ More
The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification system that can reject efficiently both pions and electrons. The position and momentum of each muon are measured using a high-precision scintillating-fibre tracker in a 4\,T solenoidal magnetic field. This paper presents the techniques used to reconstruct the phase-space distributions and reports the first particle-by-particle measurement of the emittance of the MICE Muon Beam as a function of muon-beam momentum.
△ Less
Submitted 26 March, 2019; v1 submitted 31 October, 2018;
originally announced October 2018.
-
Using SIMD and SIMT vectorization to evaluate sparse chemical kinetic Jacobian matrices and thermochemical source terms
Authors:
Nicholas J. Curtis,
Kyle E. Niemeyer,
Chih-Jen Sung
Abstract:
Accurately predicting key combustion phenomena in reactive-flow simulations, e.g., lean blow-out, extinction/ignition limits and pollutant formation, necessitates the use of detailed chemical kinetics. The large size and high levels of numerical stiffness typically present in chemical kinetic models relevant to transportation/power-generation applications make the efficient evaluation/factorizatio…
▽ More
Accurately predicting key combustion phenomena in reactive-flow simulations, e.g., lean blow-out, extinction/ignition limits and pollutant formation, necessitates the use of detailed chemical kinetics. The large size and high levels of numerical stiffness typically present in chemical kinetic models relevant to transportation/power-generation applications make the efficient evaluation/factorization of the chemical kinetic Jacobian and thermochemical source-terms critical to the performance of reactive-flow codes. Here we investigate the performance of vectorized evaluation of constant-pressure/volume thermochemical source-term and sparse/dense chemical kinetic Jacobians using single-instruction, multiple-data (SIMD) and single-instruction, multiple thread (SIMT) paradigms. These are implemented in pyJac, an open-source, reproducible code generation platform. A new formulation of the chemical kinetic governing equations was derived and verified, resulting in Jacobian sparsities of 28.6-92.0% for the tested models. Speedups of 3.40-4.08x were found for shallow-vectorized OpenCL source-rate evaluation compared with a parallel OpenMP code on an avx2 central processing unit (CPU), increasing to 6.63-9.44x and 3.03-4.23x for sparse and dense chemical kinetic Jacobian evaluation, respectively. Furthermore, the effect of data-ordering was investigated and a storage pattern specifically formulated for vectorized evaluation was proposed; as well, the effect of the constant pressure/volume assumptions and varying vector widths were studied on source-term evaluation performance. Speedups reached up to 17.60x and 45.13x for dense and sparse evaluation on the GPU, and up to 55.11x and 245.63x on the CPU over a first-order finite-difference Jacobian approach. Further, dense Jacobian evaluation was up to 19.56x and 2.84x times faster than a previous version of pyJac on a CPU and GPU, respectively.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
An automated target species selection method for dynamic adaptive chemistry simulations
Authors:
Nicholas Curtis,
Kyle Niemeyer,
Chih-Jen Sung
Abstract:
The relative importance index (RII) method for determining appropriate target species for dynamic adaptive chemistry (DAC) simulations using the DRGEP method is developed. The accuracy and effectiveness of this RII method is validated for two fuels: n-heptane and isopentanol. The RII method determines appropriate DRGEP target species solely from the local thermo-chemical state of the simulation, e…
▽ More
The relative importance index (RII) method for determining appropriate target species for dynamic adaptive chemistry (DAC) simulations using the DRGEP method is developed. The accuracy and effectiveness of this RII method is validated for two fuels: n-heptane and isopentanol. The RII method determines appropriate DRGEP target species solely from the local thermo-chemical state of the simulation, ensuring that accuracy will be maintained. Further, the RII method reduces the expertise required of users to select DRGEP target species sets appropriate to the combustion phenomena under consideration. Constant volume autoignition simulations run over a wide range of initial condi- tions using detailed reaction mechanisms for n-heptane and isopentanol show that the RII method is able to maintain accuracy even when traditional static target species sets fail, and are even more accurate than expert-selected target species sets. Additionally, the accuracy and efficiency of the RII method are compared to those of static target species sets in single-cell engine simulations under homogeneous charge compression ignition conditions. For simulations using more stringent DRGEP thresholds, the RII method performs similarly to that of the static target species sets. With a larger DRGEP threshold, the RII method is significantly more accurate than the static target species sets without imposing significant computational overhead. Furthermore, the applicability of the RII method to a DRG-based DAC scheme is discussed.
△ Less
Submitted 5 March, 2018;
originally announced April 2018.
-
On the uncertainty of temperature estimation in a rapid compression machine
Authors:
Bryan W. Weber,
Chih-Jen Sung,
Michael W. Renfro
Abstract:
Rapid compression machines (RCMs) have been widely used in the combustion literature to study the low-to-intermediate temperature ignition of many fuels. In a typical RCM, the pressure during and after the compression stroke is measured. However, measurement of the temperature history in the RCM reaction chamber is challenging. Thus, the temperature is generally calculated by the isentropic relati…
▽ More
Rapid compression machines (RCMs) have been widely used in the combustion literature to study the low-to-intermediate temperature ignition of many fuels. In a typical RCM, the pressure during and after the compression stroke is measured. However, measurement of the temperature history in the RCM reaction chamber is challenging. Thus, the temperature is generally calculated by the isentropic relations between pressure and temperature, assuming that the adiabatic core hypothesis holds. To estimate the uncertainty in the calculated temperature, an uncertainty propagation analysis must be carried out. Our previous analyses assumed that the uncertainties of the parameters in the equation to calculate the temperature were normally distributed and independent, but these assumptions do not hold for typical RCM operating procedures. In this work, a Monte Carlo method is developed to estimate the uncertainty in the calculated temperature, while taking into account the correlation between parameters and the possibility of non-normal probability distributions. In addition, the Monte Carlo method is compared to an analysis that assumes normally distributed, independent parameters. Both analysis methods show that the magnitude of the initial pressure and the uncertainty of the initial temperature have strong influences on the magnitude of the uncertainty. Finally, the uncertainty estimation methods studied here provide a reference value for the uncertainty of the reference temperature in an RCM and can be generalized to other similar facilities.
△ Less
Submitted 9 June, 2017;
originally announced June 2017.
-
Experiments and Modeling of the Autoignition of Methylcyclohexane at High Pressure
Authors:
Bryan W. Weber,
WIlliam J. Pitz,
Marco Mehl,
Emma Silke,
Alexander C. Davis,
Chih-Jen Sung
Abstract:
New experimental data are collected for methyl-cyclohexane (MCH) autoignition in a heated rapid compression machine (RCM). Three mixtures of MCH/O2/N2/Ar at equivalence ratios of $φ$=0.5, 1.0, and 1.5 are studied and the ignition delays are measured at compressed pressure of 50 bar and for compressed temperatures in the range of 690-900 K. By kee** the fuel mole fraction in the mixture constant,…
▽ More
New experimental data are collected for methyl-cyclohexane (MCH) autoignition in a heated rapid compression machine (RCM). Three mixtures of MCH/O2/N2/Ar at equivalence ratios of $φ$=0.5, 1.0, and 1.5 are studied and the ignition delays are measured at compressed pressure of 50 bar and for compressed temperatures in the range of 690-900 K. By kee** the fuel mole fraction in the mixture constant, the order of reactivity, in terms of inverse ignition delay, is measured to be $φ$=0.5 > $φ$=1.0 > $φ$=1.5, demonstrating the dependence of the ignition delay on oxygen concentration. In addition, an existing model for the combustion of MCH is updated with new reaction rates and pathways, including substantial updates to the low-temperature chemistry. The new model shows good agreement with the overall ignition delays measured in this study, as well as the ignition delays measured previously in the literature using RCMs and shock tubes. This model therefore represents a strong improvement compared to the previous version, which uniformly over-predicted the ignition delays. Chemical kinetic analyses of the updated mechanism are also conducted to help understand the fuel decomposition pathways and the reactions controlling the ignition. Combined, these results and analyses suggest that further investigation of several of the low-temperature fuel decomposition pathways is required.
△ Less
Submitted 9 June, 2017;
originally announced June 2017.
-
Comparative Autoignition Trends in the Butanol Isomers at Elevated Pressure
Authors:
Bryan W. Weber,
Chih-Jen Sung
Abstract:
Autoignition experiments of stoichiometric mixtures of s-, t-, and i-butanol in air have been performed using a heated rapid compression machine (RCM). At compressed pressures of 15 and 30 bar and for compressed temperatures in the range of 715-910 K, no evidence of a negative temperature coefficient region in terms of ignition delay response is found. The present experimental results are also com…
▽ More
Autoignition experiments of stoichiometric mixtures of s-, t-, and i-butanol in air have been performed using a heated rapid compression machine (RCM). At compressed pressures of 15 and 30 bar and for compressed temperatures in the range of 715-910 K, no evidence of a negative temperature coefficient region in terms of ignition delay response is found. The present experimental results are also compared with previously reported RCM data of n-butanol in air. The order of reactivity of the butanols is n-butanol>s-butanol$\approx$i-butanol>t-butanol at the lower pressure, but changes to n-butanol>t-butanol>s-butanol>i-butanol at higher pressure. In addition, t-butanol shows pre-ignition heat release behavior, which is especially evident at higher pressures. To help identify the controlling chemistry leading to this pre-ignition heat release, off-stoichiometric experiments are further performed at 30 bar compressed pressure, for t-butanol at $φ$ = 0.5 and $φ$ = 2.0 in air. For these experiments, higher fuel loading (i.e. $φ$ = 2.0) causes greater pre-ignition heat release (as indicated by greater pressure rise) than the stoichiometric or $φ$ = 0.5 cases. Comparison of the experimental ignition delays with the simulated results using two literature kinetic mechanisms shows generally good agreement, and one mechanism is further used to explore and compare the fuel decomposition pathways of the butanol isomers. Using this mechanism, the importance of peroxy chemistry in the autoignition of the butanol isomers is highlighted and discussed.
△ Less
Submitted 9 June, 2017;
originally announced June 2017.
-
Reduced chemistry for butanol isomers at engine-relevant conditions
Authors:
Xin Hui,
Kyle E. Niemeyer,
Kyle B. Brady,
Chih-Jen Sung
Abstract:
Butanol has received significant research attention as a second-generation biofuel in the past few years. In the present study, skeletal mechanisms for four butanol isomers were generated from two widely accepted, well-validated detailed chemical kinetic models for the butanol isomers. The detailed models were reduced using a two-stage approach consisting of the directed relation graph with error…
▽ More
Butanol has received significant research attention as a second-generation biofuel in the past few years. In the present study, skeletal mechanisms for four butanol isomers were generated from two widely accepted, well-validated detailed chemical kinetic models for the butanol isomers. The detailed models were reduced using a two-stage approach consisting of the directed relation graph with error propagation and sensitivity analysis. During the reduction process, issues were encountered with pressure-dependent reactions formulated using the logarithmic pressure interpolation approach; these issues are discussed and recommendations made to avoid ambiguity in its future implementation in mechanism development. The performance of the skeletal mechanisms generated here was compared with that of detailed mechanisms in simulations of autoignition delay times, laminar flame speeds, and perfectly stirred reactor temperature response curves and extinction residence times, over a wide range of pressures, temperatures, and equivalence ratios. The detailed and skeletal mechanisms agreed well, demonstrating the adequacy of the resulting reduced chemistry for all the butanol isomers in predicting global combustion phenomena. In addition, the skeletal mechanisms closely predicted the time-histories of fuel mass fractions in homogeneous compression-ignition engine simulations. The performance of each butanol isomer was additionally compared with that of a gasoline surrogate with an antiknock index of 87 in a homogeneous compression-ignition engine simulation. The gasoline surrogate was consumed faster than any of the butanol isomers, with tert-butanol exhibiting the slowest fuel consumption rate. While n-butanol and isobutanol displayed the most similar consumption profiles relative to the gasoline surrogate, the two literature chemical kinetic models predicted different orderings.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
UConnRCMPy: Python-based data analysis for rapid compression machines
Authors:
Bryan W. Weber,
Chih-Jen Sung
Abstract:
The ignition delay of a fuel/air mixture is an important quantity in designing combustion devices, and these data are also used to validate chemical kinetic models for combustion. One of the typical experimental devices used to measure the ignition delay is called a Rapid Compression Machine (RCM). This paper presents UConnRCMPy, an open-source Python package to process experimental data from the…
▽ More
The ignition delay of a fuel/air mixture is an important quantity in designing combustion devices, and these data are also used to validate chemical kinetic models for combustion. One of the typical experimental devices used to measure the ignition delay is called a Rapid Compression Machine (RCM). This paper presents UConnRCMPy, an open-source Python package to process experimental data from the RCM at the University of Connecticut. Given an experimental measurement, UConnRCMPy computes the thermodynamic conditions in the reaction chamber of the RCM during an experiment along with the ignition delay. UConnRCMPy implements an extensible framework, so that alternative experimental data formats can be incorporated easily. In this way, UConnRCMPy improves the consistency of RCM data processing and enables the community to reproduce data analysis procedures.
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
-
Comparative Investigation of the High Pressure Autoignition of the Butanol Isomers
Authors:
Bryan W. Weber,
Chih-Jen Sung
Abstract:
Investigation of the autoignition delay of the butanol isomers has been performed at elevated pressures of 15 bar and 30 bar and low to intermediate temperatures of 680-860 K. The reactivity of the stoichiometric isomers of butanol, in terms of inverse ignition delay, was ranked as n-butanol > sec-butanol ~ iso-butanol > tert-butanol at a compressed pressure of 15 bar but changed to n-butanol > te…
▽ More
Investigation of the autoignition delay of the butanol isomers has been performed at elevated pressures of 15 bar and 30 bar and low to intermediate temperatures of 680-860 K. The reactivity of the stoichiometric isomers of butanol, in terms of inverse ignition delay, was ranked as n-butanol > sec-butanol ~ iso-butanol > tert-butanol at a compressed pressure of 15 bar but changed to n-butanol > tert-butanol > sec-butanol > iso-butanol at 30 bar. For the temperature and pressure conditions in this study, no NTC or two-stage ignition behavior were observed. However, for both of the compressed pressures studied in this work, tert-butanol exhibited unique pre-ignition heat release characteristics. As such, tert-butanol was further studied at two additional equivalence ratios ($φ$ = 0.5 and 2.0) to help determine the cause of the heat release.
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
-
Autoignition of Butanol Isomers at Low to Intermediate Temperature and Elevated Pressure
Authors:
Bryan W. Weber,
Kamal Kumar,
Chih-Jen Sung
Abstract:
Autoignition delay experiments for the isomers of butanol, including n-, sec-, tert-, and iso-butanol, have been performed using a heated rapid compression machine. For a compressed pressure of 15 bar, the compressed temperatures have been varied in the range of 725-855 K for all the stoichiometric fuel/oxidizer mixtures. Over the conditions investigated in this study, the ignition delay decreases…
▽ More
Autoignition delay experiments for the isomers of butanol, including n-, sec-, tert-, and iso-butanol, have been performed using a heated rapid compression machine. For a compressed pressure of 15 bar, the compressed temperatures have been varied in the range of 725-855 K for all the stoichiometric fuel/oxidizer mixtures. Over the conditions investigated in this study, the ignition delay decreases monotonically as temperature increases and exhibits single-stage characteristics. Experimental ignition delays are also compared to simulations computed using three kinetic mechanisms available in the literature. Reasonable agreement is found for three isomers (tert-, iso-, and n-butanol).
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
-
A Rapid Compression Study of the Butanol Isomers at Elevated Pressure
Authors:
Bryan W. Weber,
Chih-Jen Sung
Abstract:
Investigation of the autoignition delay of the butanol isomers has been performed at elevated pressure of 15 bar and low to intermediate temperatures of 725-870 K. Stoichiometric mixtures made in nitrogen/oxygen air were studied. For the temperature and pressure conditions in this study, no NTC or two-stage ignition behavior were observed. The reactivity of the isomers of butanol, in terms of inve…
▽ More
Investigation of the autoignition delay of the butanol isomers has been performed at elevated pressure of 15 bar and low to intermediate temperatures of 725-870 K. Stoichiometric mixtures made in nitrogen/oxygen air were studied. For the temperature and pressure conditions in this study, no NTC or two-stage ignition behavior were observed. The reactivity of the isomers of butanol, in terms of inverse ignition delay, was ranked as n-butanol > sec-butanol ~ iso-butanol > tert-butanol. Predictions of the ignition delay by several kinetic mechanisms available in the literature generally over-predict the ignition delays.
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
-
Experiments and Modeling of the Autoignition of Methyl-Cyclohexane at High Pressure
Authors:
Bryan W. Weber,
William J. Pitz,
Chih-Jen Sung,
Marco Mehl,
Emma J. Silke,
Alexander C. Davis
Abstract:
The autoignition delays of mixtures of methyl-cyclohexane (MCH), oxygen, nitrogen, and argon have been studied in a heated rapid compression machine under the conditions $P_C$ = 50 bar, $T_C$ = 690 - 910K. Three different mixture compositions were studied, with equivalence ratios ranging from $φ$ = 0.5 - 1.5. The trends of the ignition delay measured at 50 bar were similar to the trends measured i…
▽ More
The autoignition delays of mixtures of methyl-cyclohexane (MCH), oxygen, nitrogen, and argon have been studied in a heated rapid compression machine under the conditions $P_C$ = 50 bar, $T_C$ = 690 - 910K. Three different mixture compositions were studied, with equivalence ratios ranging from $φ$ = 0.5 - 1.5. The trends of the ignition delay measured at 50 bar were similar to the trends measured in earlier experiments at $P_C$ = 15.1 and 25.5 bar. The experimentally measured ignition delays were compared to a newly updated chemical kinetic model for the combustion of MCH. The model has been updated to include newly calculated reaction rates for much of the low-temperature chemistry. The agreement between the experiments and the model was substantially improved compared to a previous version of the model. Nevertheless, despite the encouraging improvements, work continues on further advances, e.g. in improving predictions of the first stage ignition delays.
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
-
An Autoignition Study of iso-Butanol: Experiments and Modeling
Authors:
Bryan W. Weber,
Shamel Merchant,
Chih-Jen Sung,
William H. Green
Abstract:
The autoignition delays of iso-butanol, oxygen, and nitrogen mixtures have been measured in a heated rapid compression machine (RCM). At compressed pressures of 15 and 30 bar, over the temperature range 800-950 K, and for equivalence ratio of $φ$ = 0.5 in air, no evidence of an NTC region of overall ignition delay is found. By comparing the data from this study taken at $φ$ = 0.5 to previous data…
▽ More
The autoignition delays of iso-butanol, oxygen, and nitrogen mixtures have been measured in a heated rapid compression machine (RCM). At compressed pressures of 15 and 30 bar, over the temperature range 800-950 K, and for equivalence ratio of $φ$ = 0.5 in air, no evidence of an NTC region of overall ignition delay is found. By comparing the data from this study taken at $φ$ = 0.5 to previous data collected at $φ$ = 1.0 (Weber et al. 2013), it was found that the $φ$ = 0.5 mixture was less reactive (as measured by the inverse of the ignition delay) than the $φ$ = 1.0 mixture for the same compressed pressure. Furthermore, a recent chemical kinetic model of iso-butanol combustion was updated using the automated software Reaction Mechanism Generator (RMG) to include low- temperature chain branching pathways. Comparison of the ignition delays with the updated model showed reasonable agreement for most of the experimental conditions. Nevertheless, further work is needed to fully understand the low temperature pathways that control iso-butanol autoignition in the RCM.
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
-
High-Pressure Autoignition of Binary Blends of Methanol and Dimethyl Ether
Authors:
Hongfu Wang,
Bryan W. Weber,
Ruozhou Fang,
Chih-Jen Sung
Abstract:
Reactivity Controlled Compression Ignition (RCCI) is a new advanced engine concept that uses a dual fuel mode of operation to achieve significant improvements in fuel economy and emissions output. The fuels that are typically used in this mode include a low- and a high-reactivity fuel in varying proportions to control ignition timing. As such, understanding the interaction effects during autoignit…
▽ More
Reactivity Controlled Compression Ignition (RCCI) is a new advanced engine concept that uses a dual fuel mode of operation to achieve significant improvements in fuel economy and emissions output. The fuels that are typically used in this mode include a low- and a high-reactivity fuel in varying proportions to control ignition timing. As such, understanding the interaction effects during autoignition of binary fuel blends is critical to optimizing these RCCI engines. In this work, we measure the autoignition delays of binary blends of dimethyl ether (C$_2$H$_6$O, DME) and methanol (CH$_4$O, MeOH) in a rapid compression machine. In these experiments, dimethyl ether and methanol function as the high- and low-reactivity fuels, respectively. We considered five fuel blends at varying blending ratios (by mole), including 100% DME-0% MeOH, 75% DME-25% MeOH, 0% DME-0% MeOH, 25% DME-75% MeOH, and 0% DME-100% MeOH. Experiments are conducted at an engine-relevant pressure of 30 bar, for the stoichiometric equivalence ratio. In addition, the experimental results are compared with simulations using a chemical kinetic model for DME/MeOH combustion generated by merging independent, well-validated models for DME and MeOH.
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Autoignition of Methyl Valerate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine
Authors:
Bryan W. Weber,
Justin Bunnell,
Kamal Kumar,
Chih-Jen Sung
Abstract:
Methyl valerate (C$_6$H$_{12}$O$_2$, methyl pentanoate) is a methyl ester and a relevant surrogate component for biodiesel. In this work, we present ignition delays of methyl valerate measured using a rapid compression machine at a range of engine-relevant temperature, pressure, and equivalence ratio conditions. The conditions we have studied include equivalence ratios from 0.25 to 2.0, temperatur…
▽ More
Methyl valerate (C$_6$H$_{12}$O$_2$, methyl pentanoate) is a methyl ester and a relevant surrogate component for biodiesel. In this work, we present ignition delays of methyl valerate measured using a rapid compression machine at a range of engine-relevant temperature, pressure, and equivalence ratio conditions. The conditions we have studied include equivalence ratios from 0.25 to 2.0, temperatures between 680 K and 1050 K, and pressures of 15 bar and 30 bar. The ignition delay data demonstrate a negative temperature coefficient region in the temperature range of 720 K-800 K for both $φ$=2.0, 15 bar and $φ$=1.0, 30 bar, with two-stage ignition apparent over the narrower temperature ranges of 720 K-760 K for the lower pressure and 740 K-800 K at the higher pressure. In addition, the experimental ignition delay data are compared with simulations using an existing chemical kinetic model from the literature. The simulations with the literature model under-predict the data by factors between 2 and 10 over the entire range of the experimental data. To help determine the possible reasons for the discrepancy between simulations and experiments, a new chemical kinetic model is developed using the Reaction Mechanism Generator (RMG) software. The agreement between the experimental data and the RMG model is improved but still not satisfactory. Directions for future improvement of the methyl valerate model are discussed.
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Autoignition of n-Butanol at Elevated Pressure and Low to Intermediate Temperature
Authors:
Bryan W. Weber,
Kamal Kumar,
Yu Zhang,
Chih-Jen Sung
Abstract:
Autoignition experiments for n-butanol have been performed using a heated rapid compression machine at compressed pressures of 15 and 30 bar, in the compressed temperature range of 675-925 K, and for equivalence ratios of 0.5, 1.0, and 2.0. Over the conditions studied, the ignition delay decreases monotonically as temperature increases, and the autoignition response exhibits single-stage character…
▽ More
Autoignition experiments for n-butanol have been performed using a heated rapid compression machine at compressed pressures of 15 and 30 bar, in the compressed temperature range of 675-925 K, and for equivalence ratios of 0.5, 1.0, and 2.0. Over the conditions studied, the ignition delay decreases monotonically as temperature increases, and the autoignition response exhibits single-stage characteristics. A non-linear fit to the experimental data is performed and the reactivity, in terms of the inverse of ignition delay, shows nearly second order dependence on the initial oxygen mole fraction and slightly greater than first order dependence on initial fuel mole fraction and compressed pressure. Experimentally measured ignition delays are also compared to simulations using several reaction mechanisms available in the literature. Agreement between simulated and experimental ignition delay is found to be unsatisfactory. Sensitivity analysis is performed on one recent mechanism and indicates that uncertainties in the rate coefficients of parent fuel decomposition reactions play a major role in causing the poor agreement. Path analysis of the fuel decomposition reactions supports this conclusion and also highlights the particular importance of certain pathways. Further experimental investigations of the fuel decomposition, including speciation measurements, are required.
△ Less
Submitted 2 June, 2017;
originally announced June 2017.
-
GPU-Based Parallel Integration of Large Numbers of Independent ODE Systems
Authors:
Kyle E Niemeyer,
Chih-Jen Sung
Abstract:
The task of integrating a large number of independent ODE systems arises in various scientific and engineering areas. For nonstiff systems, common explicit integration algorithms can be used on GPUs, where individual GPU threads concurrently integrate independent ODEs with different initial conditions or parameters. One example is the fifth-order adaptive Runge-Kutta-Cash-Karp (RKCK) algorithm. In…
▽ More
The task of integrating a large number of independent ODE systems arises in various scientific and engineering areas. For nonstiff systems, common explicit integration algorithms can be used on GPUs, where individual GPU threads concurrently integrate independent ODEs with different initial conditions or parameters. One example is the fifth-order adaptive Runge-Kutta-Cash-Karp (RKCK) algorithm. In the case of stiff ODEs, standard explicit algorithms require impractically small time-step sizes for stability reasons, and implicit algorithms are therefore commonly used instead to allow larger time steps and reduce the computational expense. However, typical high-order implicit algorithms based on backwards differentiation formulae (e.g., VODE, LSODE) involve complex logical flow that causes severe thread divergence when implemented on GPUs, limiting the performance. Therefore, alternate algorithms are needed. A GPU-based Runge-Kutta-Chebyshev (RKC) algorithm can handle moderate levels of stiffness and performs significantly faster than not only an equivalent CPU version but also a CPU-based implicit algorithm (VODE) based on results shown in the literature. In this chapter, we present the mathematical background, implementation details, and source code for the RKCK and RKC algorithms for use integrating large numbers of independent systems of ODEs on GPUs. In addition, brief performance comparisons are shown for each algorithm, demonstrating the potential benefit of moving to GPU-based ODE integrators.
△ Less
Submitted 6 November, 2016;
originally announced November 2016.
-
Skeletal mechanism generation for surrogate fuels using directed relation graph with error propagation and sensitivity analysis
Authors:
Kyle E. Niemeyer,
Chih-Jen Sung,
Mandhapati P. Raju
Abstract:
A novel implementation for the skeletal reduction of large detailed reaction mechanisms using the directed relation graph with error propagation and sensitivity analysis (DRGEPSA) is developed and presented with examples for three hydrocarbon components, n-heptane, iso-octane, and n-decane, relevant to surrogate fuel development. DRGEPSA integrates two previously developed methods, directed relati…
▽ More
A novel implementation for the skeletal reduction of large detailed reaction mechanisms using the directed relation graph with error propagation and sensitivity analysis (DRGEPSA) is developed and presented with examples for three hydrocarbon components, n-heptane, iso-octane, and n-decane, relevant to surrogate fuel development. DRGEPSA integrates two previously developed methods, directed relation graph-aided sensitivity analysis (DRGASA) and directed relation graph with error propagation (DRGEP), by first applying DRGEP to efficiently remove many unimportant species prior to sensitivity analysis to further remove unimportant species, producing an optimally small skeletal mechanism for a given error limit. It is illustrated that the combination of the DRGEP and DRGASA methods allows the DRGEPSA approach to overcome the weaknesses of each, specifically that DRGEP cannot identify all unimportant species and that DRGASA shields unimportant species from removal. Skeletal mechanisms for n-heptane and iso-octane generated using the DRGEP, DRGASA, and DRGEPSA methods are presented and compared to illustrate the improvement of DRGEPSA. From a detailed reaction mechanism for n-alkanes covering n-octane to n-hexadecane with 2115 species and 8157 reactions, two skeletal mechanisms for n-decane generated using DRGEPSA, one covering a comprehensive range of temperature, pressure, and equivalence ratio conditions for autoignition and the other limited to high temperatures, are presented and validated. The comprehensive skeletal mechanism consists of 202 species and 846 reactions and the high-temperature skeletal mechanism consists of 51 species and 256 reactions. Both mechanisms are further demonstrated to well reproduce the results of the detailed mechanism in perfectly-stirred reactor and laminar flame simulations over a wide range of conditions.
△ Less
Submitted 4 July, 2016;
originally announced July 2016.
-
An investigation of GPU-based stiff chemical kinetics integration methods
Authors:
Nicholas J. Curtis,
Kyle E. Niemeyer,
Chih-Jen Sung
Abstract:
A fifth-order implicit Runge-Kutta method and two fourth-order exponential integration methods equipped with Krylov subspace approximations were implemented for the GPU and paired with the analytical chemical kinetic Jacobian software pyJac. The performance of each algorithm was evaluated by integrating thermochemical state data sampled from stochastic partially stirred reactor simulations and com…
▽ More
A fifth-order implicit Runge-Kutta method and two fourth-order exponential integration methods equipped with Krylov subspace approximations were implemented for the GPU and paired with the analytical chemical kinetic Jacobian software pyJac. The performance of each algorithm was evaluated by integrating thermochemical state data sampled from stochastic partially stirred reactor simulations and compared with the commonly used CPU-based implicit integrator CVODE. We estimated that the implicit Runge-Kutta method running on a single GPU is equivalent to CVODE running on 12-38 CPU cores for integration of a single global integration time step of 1e-6 s with hydrogen and methane models. In the stiffest case studied---the methane model with a global integration time step of 1e-4 s---thread divergence and higher memory traffic significantly decreased GPU performance to the equivalent of CVODE running on approximately three CPU cores. The exponential integration algorithms performed more slowly than the implicit integrators on both the CPU and GPU. Thread divergence and memory traffic were identified as the main limiters of GPU integrator performance, and techniques to mitigate these issues were discussed. Use of a finite-difference Jacobian on the GPU---in place of the analytical Jacobian provided by pyJac---greatly decreased integrator performance due to thread divergence, resulting in maximum slowdowns of 7.11-240.96 times; in comparison, the corresponding slowdowns on the CPU were just 1.39-2.61 times, underscoring the importance of use of an analytical Jacobian for efficient GPU integration. Finally, future research directions for working towards enabling realistic chemistry in reactive-flow simulations via GPU\slash SIMD accelerated stiff chemical kinetic integration were identified.
△ Less
Submitted 14 February, 2017; v1 submitted 13 July, 2016;
originally announced July 2016.
-
On the importance of graph search algorithms for DRGEP-based mechanism reduction methods
Authors:
Kyle E. Niemeyer,
Chih-Jen Sung
Abstract:
The importance of graph search algorithm choice to the directed relation graph with error propagation (DRGEP) method is studied by comparing basic and modified depth-first search, basic and R-value-based breadth-first search (RBFS), and Dijkstra's algorithm. By using each algorithm with DRGEP to produce skeletal mechanisms from a detailed mechanism for n-heptane with randomly-shuffled species orde…
▽ More
The importance of graph search algorithm choice to the directed relation graph with error propagation (DRGEP) method is studied by comparing basic and modified depth-first search, basic and R-value-based breadth-first search (RBFS), and Dijkstra's algorithm. By using each algorithm with DRGEP to produce skeletal mechanisms from a detailed mechanism for n-heptane with randomly-shuffled species order, it is demonstrated that only Dijkstra's algorithm and RBFS produce results independent of species order. In addition, each algorithm is used with DRGEP to generate skeletal mechanisms for n-heptane covering a comprehensive range of autoignition conditions for pressure, temperature, and equivalence ratio. Dijkstra's algorithm combined with a coefficient scaling approach is demonstrated to produce the most compact skeletal mechanism with a similar performance compared to larger skeletal mechanisms resulting from the other algorithms. The computational efficiency of each algorithm is also compared by applying the DRGEP method with each search algorithm on the large detailed mechanism for n-alkanes covering n-octane to n-hexadecane with 2115 species and 8157 reactions. Dijkstra's algorithm implemented with a binary heap priority queue is demonstrated as the most efficient method, with a CPU cost two orders of magnitude less than the other search algorithms.
△ Less
Submitted 23 June, 2016;
originally announced June 2016.
-
pyJac: analytical Jacobian generator for chemical kinetics
Authors:
Kyle E. Niemeyer,
Nicholas J. Curtis,
Chih-Jen Sung
Abstract:
Accurate simulations of combustion phenomena require the use of detailed chemical kinetics in order to capture limit phenomena such as ignition and extinction as well as predict pollutant formation. However, the chemical kinetic models for hydrocarbon fuels of practical interest typically have large numbers of species and reactions and exhibit high levels of mathematical stiffness in the governing…
▽ More
Accurate simulations of combustion phenomena require the use of detailed chemical kinetics in order to capture limit phenomena such as ignition and extinction as well as predict pollutant formation. However, the chemical kinetic models for hydrocarbon fuels of practical interest typically have large numbers of species and reactions and exhibit high levels of mathematical stiffness in the governing differential equations, particularly for larger fuel molecules. In order to integrate the stiff equations governing chemical kinetics, generally reactive-flow simulations rely on implicit algorithms that require frequent Jacobian matrix evaluations. Some in situ and a posteriori computational diagnostics methods also require accurate Jacobian matrices, including computational singular perturbation and chemical explosive mode analysis. Typically, finite differences numerically approximate these, but for larger chemical kinetic models this poses significant computational demands since the number of chemical source term evaluations scales with the square of species count. Furthermore, existing analytical Jacobian tools do not optimize evaluations or support emerging SIMD processors such as GPUs. Here we introduce pyJac, a Python-based open-source program that generates analytical Jacobian matrices for use in chemical kinetics modeling and analysis. As a demonstration, we first establish the correctness of the Jacobian matrices for kinetic models of hydrogen, methane, ethylene, and isopentanol oxidation, then demonstrate the performance achievable on CPUs and GPUs using pyJac via matrix evaluation timing comparisons.
△ Less
Submitted 19 February, 2017; v1 submitted 10 May, 2016;
originally announced May 2016.
-
Reduced chemistry for a gasoline surrogate valid at engine-relevant conditions
Authors:
Kyle E. Niemeyer,
Chih-Jen Sung
Abstract:
A detailed mechanism for the four-component RD387 gasoline surrogate developed by Lawrence Livermore National Laboratory has shown good agreement with experiments in engine-relevant conditions. However, with 1388 species and 5933 reversible reactions, this detailed mechanism is far too large to use in practical engine simulations. Therefore, reduction of the detailed mechanism was performed using…
▽ More
A detailed mechanism for the four-component RD387 gasoline surrogate developed by Lawrence Livermore National Laboratory has shown good agreement with experiments in engine-relevant conditions. However, with 1388 species and 5933 reversible reactions, this detailed mechanism is far too large to use in practical engine simulations. Therefore, reduction of the detailed mechanism was performed using a multi-stage approach consisting of the DRGEPSA method, unimportant reaction elimination, isomer lum**, and analytic QSS reduction based on CSP analysis. A new greedy sensitivity analysis algorithm was developed and demonstrated to be capable of removing more species for the same error limit compared to the conventional sensitivity analysis used in DRG-based skeletal reduction methods. Using this new greedy algorithm, several skeletal and reduced mechanisms were developed at varying levels of complexity and for different target condition ranges. The final skeletal and reduced mechanisms consisted of 213 and 148 species, respectively, for a lean-to-stoichiometric, low-temperature HCCI-like range of conditions. For a lean-to-rich, high-temperature, SI/CI-like range of conditions, skeletal and reduced mechanisms were developed with 97 and 79 species, respectively. The skeletal and reduced mechanisms in this study were produced using an error limit of 10% and validated using homogeneous autoignition simulations over engine-relevant conditions - all showed good agreement in predicting ignition delay. Furthermore, extended validation was performed, including comparison of autoignition temperature profiles, PSR temperature response curves and extinction turning points, and laminar flame speed calculations. All the extended validation showed results within the 10% error limit, demonstrating the adequacy of the resulting reduced chemistry.
△ Less
Submitted 14 January, 2015; v1 submitted 1 October, 2014;
originally announced October 2014.
-
ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnets
Authors:
B. N. Sorbom,
J. Ball,
T. R. Palmer,
F. J. Mangiarotti,
J. M. Sierchio,
P. Bonoli,
C. Kasten,
D. A. Sutherland,
H. S. Barnard,
C. B. Haakonsen,
J. Goh,
C. Sung,
D. G. Whyte
Abstract:
The affordable, robust, compact (ARC) reactor conceptual design study aims to reduce the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a 200-250 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) supercon…
▽ More
The affordable, robust, compact (ARC) reactor conceptual design study aims to reduce the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a 200-250 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) superconducting toroidal field coils, which have joints to enable disassembly. This allows the vacuum vessel to be replaced quickly, mitigating first wall survivability concerns, and permits a single device to test many vacuum vessel designs and divertor materials. The design point has a plasma fusion gain of Q_p~13.6, yet is fully non-inductive, with a modest bootstrap fraction of only ~63%. Thus ARC offers a high power gain with relatively large external control of the current profile. This highly attractive combination is enabled by the ~23 T peak field on coil with newly available REBCO superconductor technology. External current drive is provided by two innovative inboard RF launchers using 25 MW of lower hybrid and 13.6 MW of ion cyclotron fast wave power. The resulting efficient current drive provides a robust, steady state core plasma far from disruptive limits. ARC uses an all-liquid blanket, consisting of low pressure, slowly flowing fluorine lithium beryllium (FLiBe) molten salt. The liquid blanket is low-risk technology and provides effective neutron moderation and shielding, excellent heat removal, and a tritium breeding ratio >= 1.1. The large temperature range over which FLiBe is liquid permits blanket operation at 900 K with single phase fluid cooling and a high-efficiency Brayton cycle, allowing for net electricity generation when operating ARC as a Pilot power plant.
△ Less
Submitted 16 August, 2015; v1 submitted 10 September, 2014;
originally announced September 2014.
-
Mechanism reduction for multicomponent surrogates: a case study using toluene reference fuels
Authors:
Kyle E Niemeyer,
Chih-Jen Sung
Abstract:
Strategies and recommendations for performing skeletal reductions of multicomponent surrogate fuels are presented, through the generation and validation of skeletal mechanisms for a three-component toluene reference fuel. Using the directed relation graph with error propagation and sensitivity analysis method followed by a further unimportant reaction elimination stage, skeletal mechanisms valid o…
▽ More
Strategies and recommendations for performing skeletal reductions of multicomponent surrogate fuels are presented, through the generation and validation of skeletal mechanisms for a three-component toluene reference fuel. Using the directed relation graph with error propagation and sensitivity analysis method followed by a further unimportant reaction elimination stage, skeletal mechanisms valid over comprehensive and high-temperature ranges of conditions were developed at varying levels of detail. These skeletal mechanisms were generated based on autoignition simulations, and validation using ignition delay predictions showed good agreement with the detailed mechanism in the target range of conditions. When validated using phenomena other than autoignition, such as perfectly stirred reactor and laminar flame propagation, tight error control or more restrictions on the reduction during the sensitivity analysis stage were needed to ensure good agreement. In addition, tight error limits were needed for close prediction of ignition delay when varying the mixture composition away from that used for the reduction. In homogeneous compression-ignition engine simulations, the skeletal mechanisms closely matched the point of ignition and accurately predicted species profiles for lean to stoichiometric conditions. Furthermore, the efficacy of generating a multicomponent skeletal mechanism was compared to combining skeletal mechanisms produced separately for neat fuel components; using the same error limits, the latter resulted in a larger skeletal mechanism size that also lacked important cross reactions between fuel components. Based on the present results, general guidelines for reducing detailed mechanisms for multicomponent fuels are discussed.
△ Less
Submitted 15 May, 2014;
originally announced May 2014.
-
Recent progress and challenges in exploiting graphics processors in computational fluid dynamics
Authors:
Kyle E Niemeyer,
Chih-Jen Sung
Abstract:
The progress made in accelerating simulations of fluid flow using GPUs, and the challenges that remain, are surveyed. The review first provides an introduction to GPU computing and programming, and discusses various considerations for improved performance. Case studies comparing the performance of CPU- and GPU- based solvers for the Laplace and incompressible Navier-Stokes equations are performed…
▽ More
The progress made in accelerating simulations of fluid flow using GPUs, and the challenges that remain, are surveyed. The review first provides an introduction to GPU computing and programming, and discusses various considerations for improved performance. Case studies comparing the performance of CPU- and GPU- based solvers for the Laplace and incompressible Navier-Stokes equations are performed in order to demonstrate the potential improvement even with simple codes. Recent efforts to accelerate CFD simulations using GPUs are reviewed for laminar, turbulent, and reactive flow solvers. Also, GPU implementations of the lattice Boltzmann method are reviewed. Finally, recommendations for implementing CFD codes on GPUs are given and remaining challenges are discussed, such as the need to develop new strategies and redesign algorithms to enable GPU acceleration.
△ Less
Submitted 11 September, 2013;
originally announced September 2013.
-
Accelerating moderately stiff chemical kinetics in reactive-flow simulations using GPUs
Authors:
Kyle E Niemeyer,
Chih-Jen Sung
Abstract:
The chemical kinetics ODEs arising from operator-split reactive-flow simulations were solved on GPUs using explicit integration algorithms. Nonstiff chemical kinetics of a hydrogen oxidation mechanism (9 species and 38 irreversible reactions) were computed using the explicit fifth-order Runge-Kutta-Cash-Karp method, and the GPU-accelerated version performed faster than single- and six-core CPU ver…
▽ More
The chemical kinetics ODEs arising from operator-split reactive-flow simulations were solved on GPUs using explicit integration algorithms. Nonstiff chemical kinetics of a hydrogen oxidation mechanism (9 species and 38 irreversible reactions) were computed using the explicit fifth-order Runge-Kutta-Cash-Karp method, and the GPU-accelerated version performed faster than single- and six-core CPU versions by factors of 126 and 25, respectively, for 524,288 ODEs. Moderately stiff kinetics, represented with mechanisms for hydrogen/carbon-monoxide (13 species and 54 irreversible reactions) and methane (53 species and 634 irreversible reactions) oxidation, were computed using the stabilized explicit second-order Runge-Kutta-Chebyshev (RKC) algorithm. The GPU-based RKC implementation demonstrated an increase in performance of nearly 59 and 10 times, for problem sizes consisting of 262,144 ODEs and larger, than the single- and six-core CPU-based RKC algorithms using the hydrogen/carbon-monoxide mechanism. With the methane mechanism, RKC-GPU performed more than 65 and 11 times faster, for problem sizes consisting of 131,072 ODEs and larger, than the single- and six-core RKC-CPU versions, and up to 57 times faster than the six-core CPU-based implicit VODE algorithm on 65,536 ODEs. In the presence of more severe stiffness, such as ethylene oxidation (111 species and 1566 irreversible reactions), RKC-GPU performed more than 17 times faster than RKC-CPU on six cores for 32,768 ODEs and larger, and at best 4.5 times faster than VODE on six CPU cores for 65,536 ODEs. With a larger time step size, RKC-GPU performed at best 2.5 times slower than six-core VODE for 8192 ODEs and larger. Therefore, the need for develo** new strategies for integrating stiff chemistry on GPUs was discussed.
△ Less
Submitted 4 November, 2013; v1 submitted 10 September, 2013;
originally announced September 2013.