-
Design of an Intake and a Thruster for an Atmosphere-Breathing Electric Propulsion System
Authors:
F. Romano,
G. Herdrich,
Y. -A. Chan,
N. H. Crisp,
P. C. E. Roberts,
B. E. A. Holmes,
S. Edmondson,
S. Haigh,
A. Macario-Rojas,
V. T. A. Oiko,
L. A. Sinpetru K. Smith,
J. Becedas,
V. Sulliotti-Linner,
M. Bisgaard,
S. Christensen,
V. Hanessian,
T. Kauffman Jensen,
J. Nielsen,
S. Fasoulas,
C. Traub,
D. García-Almiñana,
S. Rodríguez-Donaire,
M. Sureda,
D. Kataria,
B. Belkouchi
, et al. (3 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an efficient propulsion system is required.
One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. One of the objectives of the H2020 DISCOVERER project, is the development of an intake and an electrode-less plasma thruster for an ABEP system.
The article describes the characteristics of intake design and the respective final deigns providing collection efficiencies up to $94\%$. On the other side, the radio frequency (RF) Helicon-based plasma thruster (IPT) developed at IRS, is hereby presented as well, while its performances are being evaluated, the thruster has been operated with single atmospheric species as propellant, and has highlighted very low input power requirement for operation at comparable mass flow rates $P\sim 60~W$.
△ Less
Submitted 23 November, 2022; v1 submitted 18 November, 2022;
originally announced November 2022.
-
Development and analysis of novel mission scenarios based on Atmosphere-Breathing Electric Propulsion (ABEP)
Authors:
S. Vaidya,
C. Traub,
F. Romano,
G. Herdrich,
Y. -A. Chan,
S. Fasoulas,
P. C. E. Roberts,
N. Crisp,
S. Edmondson,
S. Haigh,
B. A. Holmes,
A. Macario-Rojas,
V. T. Abrao Oiko,
K. Smith,
L. Sinpetru,
J. Becedas,
V. Sulliotti-Linner,
S. Christensen,
V. Hanessian,
T. K. Jensen,
J. Nielsen,
M. Bisgaard,
D. Garcia-Alminana,
S. Rodriguez-Donaire,
M. Suerda
, et al. (6 additional authors not shown)
Abstract:
Operating satellites in Very Low Earth Orbit (VLEO) benefits the already expanding New Space industry in applications including Earth Observation and beyond. However, long-term operations at such low altitudes require propulsion systems to compensate for the large aerodynamic drag forces. When using conventional propulsion systems, the amount of storable propellant limits the maximum mission lifet…
▽ More
Operating satellites in Very Low Earth Orbit (VLEO) benefits the already expanding New Space industry in applications including Earth Observation and beyond. However, long-term operations at such low altitudes require propulsion systems to compensate for the large aerodynamic drag forces. When using conventional propulsion systems, the amount of storable propellant limits the maximum mission lifetime. The latter can be avoided by employing Atmosphere-Breathing Electric Propulsion (ABEP) system, which collects the residual atmospheric particles and uses them as propellant for an electric thruster. Thus, the requirement of on-board propellant storage can ideally be nullified. At the Institute of Space Systems (IRS) of the University of Stuttgart, an intake, and a RF Helicon-based Plasma Thruster (IPT) for ABEP system are developed within the Horizons 2020 funded DISCOVERER project. In order to assess possible future use cases, this paper proposes and analyzes several novel ABEP based mission scenarios. Beginning with technology demonstration mission in VLEO, more complex mission scenarios are derived and discussed in detail. These include, amongst others, orbit maintenance around Mars as well as refuelling and space tug missions. The results show that the ABEP system is not only able to compensate drag for orbit maintenance but also capable of performing orbital maneuvers and collect propellant for applications such as Space Tug and Refuelling. Thus, showing a multitude of different future mission applications.
△ Less
Submitted 21 November, 2022; v1 submitted 17 November, 2022;
originally announced November 2022.
-
ADBSat: Verification and validation of a novel panel method for quick aerodynamic analysis of satellites
Authors:
Luciana Sinpetru,
Nicholas H. Crisp,
Peter C. E. Roberts,
Valeria Sulliotti-Linner,
Virginia Hanessian,
Georg H. Herdrich,
Francesco Romano,
Daniel Garcia-Alminana,
Silvia Rodriguez-Donaire,
Simon Seminari
Abstract:
We present the validation of ADBSat, a novel implementation of the panel method including a fast pseudo-shading algorithm, that can quickly and accurately determine the forces and torques on satellites in free-molecular flow. Our main method of validation is comparing test cases between ADBSat, the current de facto standard of direct simulation Monte Carlo (DSMC), and published literature. ADBSat…
▽ More
We present the validation of ADBSat, a novel implementation of the panel method including a fast pseudo-shading algorithm, that can quickly and accurately determine the forces and torques on satellites in free-molecular flow. Our main method of validation is comparing test cases between ADBSat, the current de facto standard of direct simulation Monte Carlo (DSMC), and published literature. ADBSat exhibits a significantly shorter runtime than DSMC and performs well, except where deep concavities are present in the satellite models. The shading algorithm also experiences problems when a large proportion of the satellite surface area is oriented parallel to the flow, but this can be mitigated by examining the body at small angles to this configuration (${\pm}$ 0.1°). We recommend that an error interval on ADBSat outputs of up to 3\% is adopted. Therefore, ADBSat is a suitable tool for quickly determining the aerodynamic characteristics of a wide range of satellite geometries in different environmental conditions in VLEO. It can also be used in a complementary manner to identify cases that warrant further investigation using other numerical-based methods.
△ Less
Submitted 22 February, 2022; v1 submitted 12 October, 2021;
originally announced October 2021.
-
System Modelling of Very Low Earth Orbit Satellites for Earth Observation
Authors:
N. H. Crisp,
P. C. E. Roberts,
K. L. Smith,
V. T. A. Oiko,
V. Sulliotti-Linner,
V. Hanessian,
G. H. Herdrich,
Daniel García-Almiñana,
D. Kataria,
S. Seminari
Abstract:
The operation of satellites in very low Earth orbit (VLEO) has been linked to a variety of benefits to both the spacecraft platform and mission design. Critically, for Earth observation (EO) missions a reduction in altitude can enable smaller and less powerful payloads to achieve the same performance as larger instruments or sensors at higher altitude, with significant benefits to the spacecraft d…
▽ More
The operation of satellites in very low Earth orbit (VLEO) has been linked to a variety of benefits to both the spacecraft platform and mission design. Critically, for Earth observation (EO) missions a reduction in altitude can enable smaller and less powerful payloads to achieve the same performance as larger instruments or sensors at higher altitude, with significant benefits to the spacecraft design. As a result, renewed interest in the exploitation of these orbits has spurred the development of new technologies that have the potential to enable sustainable operations in this lower altitude range. In this paper, system models are developed for (i) novel materials that improve aerodynamic performance enabling reduced drag or increased lift production and resistance to atomic oxygen erosion and (ii) atmosphere-breathing electric propulsion (ABEP) for sustained drag compensation or mitigation in VLEO. Attitude and orbit control methods that can take advantage of the aerodynamic forces and torques in VLEO are also discussed. These system models are integrated into a framework for concept-level satellite design and this approach is used to explore the system-level trade-offs for future EO spacecraft enabled by these new technologies. A case-study presented for an optical very-high resolution spacecraft demonstrates the significant potential of reducing orbital altitude using these technologies and indicates possible savings of up to 75% in system mass and over 50% in development and manufacturing costs in comparison to current state-of-the-art missions. For a synthetic aperture radar (SAR) satellite, the reduction in mass and cost with altitude were shown to be smaller, though it was noted that currently available cost models do not capture recent commercial advancements in this segment...
△ Less
Submitted 5 August, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Intake Design for an Atmosphere-Breathing Electric Propulsion System (ABEP)
Authors:
F. Romano,
J. Espinosa-Orozco,
M. Pfeiffer,
G. Herdrich,
N. H. Crisp,
P. C. E. Roberts,
B. E. A. Holmes,
S. Edmondson,
S. Haigh,
S. Livadiotti,
A. Macario-Rojas,
V. T. A. Oiko,
L. A. Sinpetru,
K. Smith,
J. Becedas,
V. Sulliotti-Linner,
M. Bisgaard,
S. Christensen,
V. Hanessian,
T. Kauffman Jensen,
J. Nielsen,
Y. -A. Chan,
S. Fasoulas,
C. Traub,
D. García-Almiñana
, et al. (7 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. IRS is develo**, within the H2020 DISCOVERER project, an intake and a thruster for an ABEP system. The article describes the design and simulation of the intake, optimized to feed the radio frequency (RF) Helicon-based plasma thruster developed at IRS. The article deals in particular with the design of intakes based on diffuse and specular reflecting materials, which are analysed by the PICLas DSMC-PIC tool. Orbital altitudes $h=150-250$ km and the respective species based on the NRLMSISE-00 model (O, $N_2$, $O_2$, He, Ar, H, N) are investigated for several concepts based on fully diffuse and specular scattering, including hybrid designs. The major focus has been on the intake efficiency defined as $η_c=\dot{N}_{out}/\dot{N}_{in}$, with $\dot{N}_{in}$ the incoming particle flux, and $\dot{N}_{out}$ the one collected by the intake. Finally, two concepts are selected and presented providing the best expected performance for the operation with the selected thruster. The first one is based on fully diffuse accommodation yielding to $η_c<0.46$ and the second one based un fully specular accommodation yielding to $η_c<0.94$. Finally, also the influence of misalignment with the flow is analysed, highlighting a strong dependence of $η_c$ in the diffuse-based intake while, ...
△ Less
Submitted 1 July, 2021; v1 submitted 30 June, 2021;
originally announced June 2021.
-
In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)
Authors:
N. H. Crisp,
P. C. E. Roberts,
S. Livadiotti,
A. Macario Rojas,
V. T. A. Oiko,
S. Edmondson,
S. J. Haigh,
B. E. A. Holmes,
L. A. Sinpetru,
K. L. Smith,
J. Becedas,
R. M. Dominguez,
V. Sulliotti-Linner,
S. Christensen,
J. Nielsen,
M. Bisgaard,
Y-A. Chan,
S. Fasoulas,
G. H. Herdrich,
F. Romano,
C. Traub,
D. Garcia-Alminana,
S. Rodriguez-Donaire,
M. Sureda,
D. Kataria
, et al. (4 additional authors not shown)
Abstract:
The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are impo…
▽ More
The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km.
△ Less
Submitted 17 December, 2020; v1 submitted 14 December, 2020;
originally announced December 2020.
-
RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)
Authors:
Francesco Romano,
Yung-An Chan,
Georg Herdrich,
Peter C. E. Roberts,
C. Traub S. Fasoulas,
K. Smith,
S. Edmondson,
S. Haigh,
N. H. Crisp,
V. T. A. Oiko,
S. D. Worrall,
S. Livadiotti,
C. Huyton,
L. A. Sinpetru,
A. Straker,
J. Becedas,
R. M. Domínguez,
D. González,
V. Cañas,
V. Sulliotti-Linner,
V. Hanessian,
A. Mølgaard,
J. Nielsen,
M. Bisgaard,
D. Garcia-Almiñana
, et al. (10 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirem…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planet with atmosphere, enabling new mission at low altitude ranges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems. IRS is develo** within the DISCOVERER project, an intake and a thruster for an ABEP system. The paper describes the design and implementation of the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design and implementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonance imaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. The IPT is based on RF electrodeless operation aided by an externally applied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector, and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is to minimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by the formation of helicon waves within the plasma that are to improve the overall efficiency and achieve higher exhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedure is presented
△ Less
Submitted 14 July, 2020; v1 submitted 13 July, 2020;
originally announced July 2020.
